Best Flywheel Locks - Buying Guide
Last Updated: 05/09/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Universal Flywheel Holder, for Both 6 volt and 12 volt VW, Compatible with Dune Buggy
Asin: B00BJPY9OS | Model: 00-5003-0 | PartNumber: 00-5003-0 | Ean: 0707924328394 | UPC: 707924328394
Brand: Empi | Manufacturer: EMPI
Dimensions: 2.00 x 2.00 x 4.00 Inches | Weight: 0.00 pounds
See On Amazon #2
Lisle 22110 Flywheel Lock
Asin: B002PHYM2I | Model: 22110 | PartNumber: 22110 | Ean: 0083045221104 | UPC: 083045221104
Features
- Locks flywheel in place when removing harmonic balancer on 6.6L Duramax Engines with Allison automatic transmissions
- Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
- On 2500 and 3500 pickups, remove metal spring-loaded inspection plate on the bottom of the transmission
- For more information check the main Lisle tool- 22100
- Replacement part for Lisle tool- 22100
- See more on Amazon...
On 2500 And 3500 Pickups, Remove Metal Spring-Loaded Inspection Plate On The Bottom Of The Transmission.
Replacement Part For Lisle Tool- 22100.
For More Information Check The Main Lisle Tool- 22100.
Saves Time By Locking The Flywheel At The Transmission Instead Of Having To Remove The Starter For Water Pump Replacement.
First Available: 06/26/2014
Brand: Lisle | Manufacturer: Lisle
Dimensions: 0.50 x 2.50 x 2.00 Inches | Weight: 2.50 Pounds
See On Amazon #3
Chelhead LS Flywheel Locking Tool Steel Black Oxide Flexplate Locking Holder Tool Compatible with Engine Chevy LS 1 2 3 LSX
Asin: B087JB34VK | Ean: 0738629006522 | UPC: 738629006522
Features
- Chelhead LS flywheel locking tool Compatible with Chevy/GM, LS1, LS2, LS3, LS6, clears all RWD bellhousings-Manual and Automatic (do not work on FWD engines)
- Works on all GM 97 -2019 rwd V8 LS and LT baised engines. Cars and trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 liter( Will not fit Gen 3 coyote 18 and up engines)
- TIG welded using 1/4 cold rolled USA Steel, proven design for strength and reliability
- Easy to install - ls engine tools just bolts in place of your starter and locks securely into the flywheel teeth
- ls flywheel locking tool are designed to work on engines mounted to an engine stand or an engine already installed in the vehicle
- Packing: 1PCS Engine Flywheel Locking Tool Comes with two proper length grade 8.8 bolts
- See more on Amazon...
Tig Welded Using 1/4" Cold Rolled Usa Steel, Proven Design For Strength And Reliability.
Ls Flywheel Locking Tool Are Designed To Work On Engines Mounted To An Engine Stand Or An Engine Already Installed In The Vehicle.
Packing: 1Pcs Engine Flywheel Locking Tool Comes With Two Proper Length Grade 8.8 Bolts.
Easy To Install - Ls Engine Tools Just Bolts In Place Of Your Starter And Locks Securely Into The Flywheel Teeth.
Works On All Gm 97 -2019 Rwd V8 Ls And Lt Baised Engines. Cars And Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 Liter( Will Not Fit Gen 3 Coyote 18 And Up Engines).
Brand: Chelhead | Manufacturer: SAMLIGHT
See On Amazon #4
E-cowlboy Flywheel Locking Tool with 36mm 3/4 Socket for 6.6L Duramax
Asin: B085FXPQ73 | Model: 22100 | PartNumber: 22100 | Ean: 7427046758406
Features
- Benefits -- Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions. Saving time than removing the starter for water pump replacement.
- Duramax 2500 / 3500 Pickups Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
- Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
- 36mm Socket -- Use 36mm 12 point socket with 3/4 square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle.
- 100% Satisaction Guarantee: If you're not 100% satisfied with the Flywheel Locking Tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
- See more on Amazon...
Duramax 4500 / 5500 Trucks -- Use Toothed Pieces With Screws Remove The Rubber Inspection Cap On The Bottom Of The Transmission. Insert The Tool At The Front Of The Opening To Engage The Flywheel And Hand Tighten Bolt To Hold Tool In Place..
100% Satisaction Guarantee: If You're Not 100% Satisfied With The Flywheel Locking Tool, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty..
36Mm Socket -- Use 36Mm 12 Point Socket With 3/4" Square Drive To Remove Harmonic Balancer Bolt And Re-Torque On Installation. 36Mm 12 Point Socket Can Also Be Used On Axle..
Duramax 2500 / 3500 Pickups – Use Toothed Pieces Only Removes Metal Spring-Loaded Inspection Plate On The Bottom Of The Transmission. Tool Should Slide Into Opening Toward Engine With The Top Of The Tool Engaging The Teeth Of The Flywheel..
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #5
Universal Flywheel Holder for Volkswagen Beetle Dune Buggy, for Porsche 914 Type 4, 325Ci 2004, E39 540i, for Mazda Miata 1.8 Motor and for LS1, Buick 215
Asin: B0BZ4H2ZWB | Model: Universal Flywheel Holder | PartNumber: Universal Flywheel Holder
Features
- Fitment: For Volkswagen Beetle Dune Buggy; Porsche 914 Type 4; 325Ci 2004, E39 540i; Mazda Miata 1.8 Motor; LS1, Buick 215
- Material: Made of steel, sturdy and durable
- Package included: 1 x Flywheel Holder, 1 x Long Screw, 1 x Nut, 1 x Pad
- See more on Amazon...
Package Included: 1 X Flywheel Holder, 1 X Long Screw, 1 X Nut, 1 X Pad.
Material: Made Of Steel, Sturdy And Durable.
Brand: LiiQuu | Manufacturer: LiiQuu
Warranty: 30 Days
See On Amazon #6
CTA Tools 8809 Flywheel Locking Tool - Compatible with BMW
Asin: B07GBPDYW2 | Model: 8809 | PartNumber: 8809 | Ean: 0053001088096 | UPC: 053001088096
Features
- BMW Flywheel locking tool locks the flywheel while the transmission is removed for service
- Applications: M47TU, M54, M57T2, M57TU, N40, N42, N43, N54, N45T, N46, N46T, N51, N52, N53, N54, N62, N73, S85 & W17 engines
- Comparable to BMW factory tool # 119260
- Precision Made
- See more on Amazon...
Comparable To Bmw Factory Tool # 119260.
Precision Made.
Applications: M47tu, M54, M57t2, M57tu, N40, N42, N43, N54, N45t, N46, N46t, N51, N52, N53, N54, N62, N73, S85 & W17 Engines.
First Available: 08/07/2018
Brand: CTA Tools | Manufacturer: CTA Tools
Weight: 0.80 pounds
Warranty: see manufacturer site
See On Amazon #7
Lisle 22100 Flywheel Locking Tool for 6.6L Duramax
Asin: B002MCVPOO | Model: 22100 | PartNumber: 22100 | Ean: 0083045221005, 0956260273404, 0641125374890, 7355117590856, 0753956448784, 1897162352493 | UPC: 753956448784, 956260273404, 083045221005, 641125374890
Features
- Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions
- Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
- Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation
- Package dimension is 4.5 inches width by 5 inches height by 2 inches depth
- See more on Amazon...
Use 36Mm 12-Point Socket With 3/4 Square Drive To Remove Harmonic Balancer Bolt And Retorque On Installation.
Package Dimension Is 4.5 Inches Width By 5 Inches Height By 2 Inches Depth.
Saves Time By Locking The Flywheel At The Transmission Instead Of Having To Remove The Starter For Water Pump Replacement.
Brand: Lisle | Manufacturer: Lisle
Dimensions: 3.00 x 4.00 x 3.00 inches | Weight: 1.45 pounds
Warranty: Lifetime
See On Amazon #8
Yuesstloo Flywheel Locking Tool 303-393 21-168, Compatible with Ford Focus Fiesta
Asin: B09MHS6FFM
Features
- Yuesstloo Flywheel Locking Tool is used to lock the flywheel on the transmission easily, the flywheel and crankshaft must be held at the correct timing position.
- Compatible with Ford Diesel and Petrol Engines. Compatible with Focus 2.0 TDCi, Focus C Max 2.0 TDCi, Focus 1.6 T-VCT, Focus C Max1.6Ti - VCT, Fiesta 1.8 D Turbo, Focus 1.8/TDdi/TDCi, Focus C Max 1.8 TDCi, Toumeo Connect 1.8, TDDi/TDCi, Transit Connect 1.8, Tddi/TDCi
- Comes with 1x flywheel locking tool 21-168/303-393, 1x flywheel locking tool adaptor (01) 303-393-01, 1x flywheel locking tool adaptor (02) 303-393-02
- Made of high quality material, high precision, strong and not easy to break.
- 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority.
- See more on Amazon...
Comes With 1X Flywheel Locking Tool 21-168/303-393, 1X Flywheel Locking Tool Adaptor (01) 303-393-01, 1X Flywheel Locking Tool Adaptor (02) 303-393-02.
100% Customer Satisfaction Guarantee: If You Are Unhappy For Any Reason Or There Is Some Problem With Our Products, You Can Get Help From Us. Customer Satisfaction Is Our Top Priority..
Made Of High Quality Material, High Precision, Strong And Not Easy To Break..
Compatible With Ford Diesel And Petrol Engines. Compatible With Focus 2.0 Tdci, Focus C Max 2.0 Tdci, Focus 1.6 T-Vct, Focus C Max1.6Ti - Vct, Fiesta 1.8 D Turbo, Focus 1.8/Tddi/Tdci, Focus C Max 1.8 Tdci, Toumeo Connect 1.8, Tddi/Tdci, Transit Connect 1.8, Tddi/Tdci.
Brand: Yuesstloo | Manufacturer: Yuesstloo
See On Amazon #9
Allstar Performance Flywheel Locking Tool SBC/BBC
Asin: B00YJDX5LK | Model: ALL96426 | PartNumber: ALL96426 | Ean: 0848238069174 | UPC: 848238069174
Features
- Product Type :Auto Part
- Package Dimensions :9.0 L X 4.0 W X 0.85 H
- Country Of Origin :United States
- Package Weight :0.215Lbs
- See more on Amazon...
Country Of Origin :United States.
Package Weight :0.215Lbs.
Package Dimensions :9.0 " L X 4.0 " W X 0.85 " H.
First Available: 12/06/2016
Brand: Allstar Performance | Manufacturer: Allstar Performance
Dimensions: 0.85 x 9.00 x 4.00 Inches | Weight: 0.22 pounds
Warranty: 90 day
See On Amazon #10
QISF 4Pcs Flywheel Variator Locking Tool Adjustable Spanner Wrench Holding Remove Tools 24mm 27mm Magneto Flywheel Puller and 20mm 24mm Clutch Lock Nut Spanner Tool
Asin: B09KXGGVKP | Ean: 0707112085382 | UPC: 707112085382
Features
- Function -- 4 In 1 Flywheel tools set; Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.One Used for removal of the flywheel or rotor if applicable;Motorcycle variator holding locking tool; Also come with Flywheel variator clutch spanner wrench.
- Fits Flywheel Puller for GY6 50CC 125CC 150CC Honda Suzuki KTM ATV scooter dirt bike; Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler
- Flywheel puller Size & Material -- Stator magneto flywheel puller with 2 sizes:24mm&27mm; Magnetic steel
- Clutch lock Size -- Clutch lock tool Inner Diameter(upper): 20mm ; Inner Diameter(under): 24mm; Solid steel material
- Package includes -- 1 Magneto Flywheel Puller, 1 Clutch lock tool, 1 Flywheel Variator Clutch Spanner Wrench, 1 X Motorcycle Variator Holding Locking Tool
- See more on Amazon...
【Flywheel Puller Size & Material】-- Stator Magneto Flywheel Puller With 2 Sizes:24Mm&27Mm; Magnetic Steel.
【Package Includes】-- 1×Magneto Flywheel Puller, 1×Clutch Lock Tool, 1×Flywheel Variator Clutch Spanner Wrench, 1 X Motorcycle Variator Holding Locking Tool.
【Clutch Lock Size】-- Clutch Lock Tool Inner Diameter(Upper): 20Mm ; Inner Diameter(Under): 24Mm; Solid Steel Material.
【Fits】 Flywheel Puller For Gy6 50Cc 125Cc 150Cc Honda Suzuki Ktm Atv Scooter Dirt Bike; Clutch Lock Tool For 50Cc-125Cc Honda Motorcycle Atv Dirt Bike Go Kart Pit Bike 4 Wheeler.
Brand: QISF | Manufacturer: QISF
See On Amazon #11
ECSiNG Car Flywheel Timing Tool Carbon Steel Flywheel Locking Tool Compatible with 1.6 1.9D Clutch Engine Damper Compatible with Peugeot Compatible with Citroen Automobile
Asin: B0CJ2DTBNV | Ean: 4895243570153
Features
- Compatibility - This car flywheel timing tool is compatible with Renault MOT582-01, compatible with Peugeot compatible with Citroen 0153A, 6012T, 9765.54, compatible with BMW 119260, compatible with Mercedes 607589014000.
- Application - Compatible with 1.6 1.9D clutch, but not compatible with 2.0 HDi PSA engine, please confirm the desired model before purchasing.
- Functional - The flywheel lock will allow you to lock the flywheel, in order to carry out the operations of setting the timing, dismantling the Damper pulley etc.
- Material - Made of carbon steel material, providing reliability and durability for long-term use.
- Package includes - 1x Car Flywheel Timing Tool, suitable for many engines and car models.
- See more on Amazon...
Functional - The Flywheel Lock Will Allow You To Lock The Flywheel, In Order To Carry Out The Operations Of Setting The Timing, Dismantling The Damper Pulley Etc..
Package Includes - 1X Car Flywheel Timing Tool, Suitable For Many Engines And Car Models..
Material - Made Of Carbon Steel Material, Providing Reliability And Durability For Long-Term Use..
Application - Compatible With 1.6 1.9D Clutch, But Not Compatible With 2.0 Hdi Psa Engine, Please Confirm The Desired Model Before Purchasing..
Brand: ECSiNG | Manufacturer: ECSiNG
See On Amazon #12
V-SEK 2801 Flywheel Holder Compatible with BMW N20 N26 - Engines Flex Plate Lock Tool -Great for Replacing The Ttiming Chain
Asin: B08DXXX8QM | Ean: 0791568741848 | UPC: 791568741848
Features
- APPLICATION- 2801 flywheel holder compatible with BMW N20 & N26 engines.Used for securing the crankshaft with the transmission installed(Connected to engine).
- FUNCTION- While replacing the timing chain, this tool can hold the flywheel holder; It helps to release and tighten down the central bolts on the vibration damper.
- QUALITY- Ultra-precise design, advanced heavy duty soild steel structure, durability and anti-corrosion.
- NOTE- Automatic transmissions only. Comparable to Factory Tool No. 83302222742
- Kits Include--1pcs 2801 Flywheel Holder.
- See more on Amazon...
Quality- Ultra-Precise Design, Advanced Heavy Duty Soild Steel Structure, Durability And Anti-Corrosion..
Kits Include--1Pcs 2801 Flywheel Holder..
Note- Automatic Transmissions Only. Comparable To Factory Tool No. 83302222742.
Function- While Replacing The Timing Chain, This Tool Can Hold The Flywheel Holder; It Helps To Release And Tighten Down The Central Bolts On The Vibration Damper..
Brand: V-SEK | Manufacturer: BL Factory
Dimensions: 1.85 x 3.70 x 2.90 Inches
See On Amazon #13
MOEBULB Flywheel Locking Tool Compatible for 6.6L Duramax Engine with 36mm 3/4 Inch Wench
Asin: B088FJ2XLS | Ean: 6240272026955
Features
- Compatible for 6.6L Duramax engines with Allison automatic transmissions.
- Materior : All components made of CNC steel, surface black coated with great rust and corrosion resistance, excellent solid and durable.
- Work with Duramax 4500 / 5500 trucks.Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
- Forged 36mm socket Use on the balancer bolt.Use with a 3/4 square drive wrench,Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
- Work with Duramax 4500 / 5500 trucks.Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
- See more on Amazon...
Work With Duramax 4500 / 5500 Trucks.Remove The Rubber Inspection Cap On The Bottom Of The Transmission.Insert The Tool At The Front Of The Opening To Engage The Flywheel And Hand Tighten Bolt To Hold Tool In Place..
Work With Duramax 4500 / 5500 Trucks.Remove The Rubber Inspection Cap On The Bottom Of The Transmission.Insert The Tool At The Front Of The Opening To Engage The Flywheel And Hand Tighten Bolt To Hold Tool In Place..
Forged 36Mm Socket Use On The Balancer Bolt.Use With A 3/4" Square Drive Wrench,Locking The Flywheel At The Transmission Instead Of Having To Remove The Starter For Water Pump Replacement..
Materior : All Components Made Of Cnc Steel, Surface Black Coated With Great Rust And Corrosion Resistance, Excellent Solid And Durable..
Brand: MOEBULB | Manufacturer: MOE-BULB
See On Amazon #14
DarSeity LS Engine Flywheel Locking Tool, Flexplate Holding Tool Compatible with Chevy LS 1 2 3 LSX
Asin: B09YCLC8LB | Model: LS Flywheel holder | PartNumber: LS Flywheel holder
Features
- Compatible with Chevy/GM LS1, LS2, LS3, LS6 LSX Engine, to be used on engine mounts or in vehicles. NOTE:Not suitable for all-wheel drive engines.
- Designed to work on engines already installed in vehicles. Works on all GM 97 -2019 rwd V8 LS and LT baised engines. Cars & Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 liter ( NOT fit Gen 3 coyote 18 and up engines).
- Simply bolt the starter into place and lock it securely to the flywheel teeth.
- Welded using 1/4 US cold rolled steel with black coating, for strength and reliability.
- Tools that must be had for cam or balancer replacement.
- See more on Amazon...
Simply Bolt The Starter Into Place And Lock It Securely To The Flywheel Teeth..
Tools That Must Be Had For Cam Or Balancer Replacement..
Welded Using 1/4" Us Cold Rolled Steel With Black Coating, For Strength And Reliability..
Designed To Work On Engines Already Installed In Vehicles. Works On All Gm 97 -2019 Rwd V8 Ls And Lt Baised Engines. Cars & Trucks. 4.8, 5.3, 5.7, 6.0, 6.2, 7.0 Liter ( Not Fit Gen 3 Coyote 18 And Up Engines)..
Brand: DarSeity | Manufacturer: DarSeity
Dimensions: 1.97 x 5.91 x 3.94 Inches | Weight: 0.51 pounds
Warranty: 1 year
See On Amazon #15
Flywheel Locking Tool Compatible with Mercedes Benz
Asin: B00RJNGVU4 | Model: KM838-M | PartNumber: KM838-M
Features
- Locks flywheel at starter ring gear from the transmission side.
- Compatible with Mercedes Benz Model M102, 103, 104,111, 601, 602,603, 604, 605,606, 611, 612, 613
- See more on Amazon...
Compatible With Mercedes Benz Model M102, 103, 104,111, 601, 602,603, 604, 605,606, 611, 612, 613.
Brand: Kommen Tools
See On Amazon #16
Engine Flywheel Locking Tool Engine Flywheel Locking 09231 2B100 Steel Flywheel Fixed Holding Replacement for Hyundai Accent 2011 2018
Asin: B0B2KBT29T
Features
- OE Number ---- The referencing OE number of this locking kit is 09231 2B100, which is molded and designed depend on the original car data. Please double check the part number of your item, matching information is for reference only.
- OE Number ---- The referencing OE number of this locking kit is 09231 2B100, which is molded and designed depend on the original car data. Please double check the part number of your item, matching information is for reference only.
- Fitment ---- The engine flywheel holding is a repalcement for Hyundai , repalcement for Kia, for more detailed information please refer to the parameters. We only use the highest grade materials, built to strict quality control standards. Every product must take inspected and tested multiple times before the shipment.
- Features ---- This tool ensures the crankshaft is locked to allow the crankshaft pulley, clutch bolts and flywheel bolts to be removed and torqued without moving the crankshaft. You just need to bolt in place of your starter and locks securely into the flywheel teeth.
- High strength steel ---- Engine Flywheel Locking Tool is used for timing chain and engine rebuild use, which is made of high strength steel, robust and durable, ensuring not easy to crack, scratch resistant, increasing product life.
- Perfect Replacement ---- Engine Flywheel Locking Tool is made by exquisite processing and strict accordance with standard requirements, which have professional production, high precision and good reliability. Perfect replacement for your old or broken.
- See more on Amazon...
Fitment ---- The Engine Flywheel Holding Is A Repalcement For Hyundai , Repalcement For Kia, For More Detailed Information Please Refer To The Parameters. We Only Use The Highest Grade Materials, Built To Strict Quality Control Standards. Every Product Must Take Inspected And Tested Multiple Times Before The Shipment..
High Strength Steel ---- Engine Flywheel Locking Tool Is Used For Timing Chain And Engine Rebuild Use, Which Is Made Of High Strength Steel, Robust And Durable, Ensuring Not Easy To Crack, Scratch Resistant, Increasing Product Life..
Perfect Replacement ---- Engine Flywheel Locking Tool Is Made By Exquisite Processing And Strict Accordance With Standard Requirements, Which Have Professional Production, High Precision And Good Reliability. Perfect Replacement For Your Old Or Broken..
Features ---- This Tool Ensures The Crankshaft Is Locked To Allow The Crankshaft Pulley, Clutch Bolts And Flywheel Bolts To Be Removed And Torqued Without Moving The Crankshaft. You Just Need To Bolt In Place Of Your Starter And Locks Securely Into The Flywheel Teeth..
Oe Number ---- The Referencing Oe Number Of This Locking Kit Is 09231 2B100, Which Is Molded And Designed Depend On The Original Car Data. Please Double Check The Part Number Of Your Item, Matching Information Is For Reference Only..
Brand: Acouto | Manufacturer: Acouto
See On Amazon #17
Heavy Duty 2801 Flywheel Holder Flex Plate Lock Tool for Replacing Timing Chain + 7676 Oil Seal Repair Kit with Balance Shaft & Oil Pump Alignment Tool Set for BMW 1 2 3 4 Series N20 N26 Engines
Asin: B089112KQW
Features
- Perfect Fitment Compatible with BMW N20 N26 engines. Fits for BMW 1 Series 2012-2016; Fits for BMW 2 Series 2014-2016; Fits for BMW 3 Series 2012-2016; Fits for BMW 4 Series 2014-2016; Fits for BMW X1 2011-2015; Fits for BMW X3 2011-2017; Fits for BMW X4 2014-2017; Fits for BMW Z4 2011-2017. Direct replacement for BMW factory tool part number 83 30 2 318 117, 83 30 2 212 825 and 83302222742 (Attention: Automatic transmissions only.)
- 2801 Flywheel Holder Tool Used to easily and properly lock the transmission flex plate in place to perform a timing service for N20 N26 engines. Also can secure the crankshaft with the transmission installed (connect to engine). In additional, can better hold the flywheel / flex plate while replacing the timing chain, allows you release and tighten down the central bolt on the vibration damper hub.
- 7676 Oil Seal Repair Kit Specially designed to easily remove, install and replace the oil pump, chain, balance shaft housing and sprocket during chain repairs, helps you align the balancer shaft into the correct timed position and holding chain sprocket.
- Package Includes 1 x 2801 Flywheel Holder and 1 x 7676 Seal Repair Kit which comes with 2 x Screw - PH3 M6 x 1.0 & 1 x Hex Drive Size 10 (length: 26mm/1.02inch).
- 100% Satisfaction Guarantee If you're not satisfied with this 2801 Flywheel Holder Flex Plate Lock Tool & 7676 Oil Seal Repair Tool Set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!
- See more on Amazon...
【7676 Oil Seal Repair Kit】Specially Designed To Easily Remove, Install And Replace The Oil Pump, Chain, Balance Shaft Housing And Sprocket During Chain Repairs, Helps You Align The Balancer Shaft Into The Correct Timed Position And Holding Chain Sprocket..
【100% Satisfaction Guarantee】If You're Not Satisfied With This 2801 Flywheel Holder Flex Plate Lock Tool & 7676 Oil Seal Repair Tool Set, Simply Return It For A Full Refund In 30 Days. While You Have Any Questions About Our Products, Please Feel Free To Contact Us And We Will Provide The Best Service. Always Buy Confidently In Bonbo!.
【Package Includes】1 X 2801 Flywheel Holder And 1 X 7676 Seal Repair Kit Which Comes With 2 X Screw - Ph3 M6 X 1.0 & 1 X Hex Drive Size 10 (Length: 26Mm/1.02Inch)..
【2801 Flywheel Holder Tool】Used To Easily And Properly Lock The Transmission Flex Plate In Place To Perform A Timing Service For N20 N26 Engines. Also Can Secure The Crankshaft With The Transmission Installed (Connect To Engine). In Additional, Can Better Hold The Flywheel / Flex Plate While Replacing The Timing Chain, Allows You Release And Tighten Down The Central Bolt On The Vibration Damper Hub..
Brand: Bonbo | Manufacturer: Bonbo
See On Amazon #18
LainKeen Auto Engine Flywheel Locking Tool Kit Compatible with BMW N20 M47TU M54 M57T2 M57TU N40 N42 N43 N45T N46 N46T N51 N52 N53 N54 N62 N73 S85 & W17 Engines
Asin: B0CB6239BM | Model: SK1679 | PartNumber: SK1679
Features
- 8809 Flywheel Locking Tool is used to lock the flywheel while the transmission is removed for service.
- Applications: Compatible with BMW N20 M47TU M54 M57T2 M57TU N40 N42 N43 N45T N46 N46T N51 N52 N53 N54 N62 N73 S85 & W17 engines.
- Comparable to BMW factory tool # 119260.
- Ultra-precise design, made of high quality material, with high hardness, durability and anti-corrosion.
- 7*24 hours online service, if you have any questions with the Flywheel Locking Tool, please feel free to contact us.
- See more on Amazon...
Comparable To Bmw Factory Tool # 119260..
7*24 Hours Online Service, If You Have Any Questions With The Flywheel Locking Tool, Please Feel Free To Contact Us..
Ultra-Precise Design, Made Of High Quality Material, With High Hardness, Durability And Anti-Corrosion..
Applications: Compatible With Bmw N20 M47tu M54 M57t2 M57tu N40 N42 N43 N45t N46 N46t N51 N52 N53 N54 N62 N73 S85 & W17 Engines..
Brand: LainKeen | Manufacturer: LainKeen
Warranty: 1 Year
See On Amazon #19
MOEBULB Flywheel Holding Locking Tool Compatible for 6.2 Engine 2014 2015 Chevrolet LS1 LS2 LS3 LS6
Asin: B086YBX2YF | Ean: 6240272027600
Features
- Compatible for 6.2 Engine 2014 2015 Chevrolet LS1 LS2 LS3 LS6 , Gen V LT1 6.2L (2014 Late Models), L86 6.2L Truck (2014), LT4 6.2L Corvette Z06 (2015), L83 5.3L Truck (2014), LS1, 2, 3, LSX Engines.
- 100% TIG welded , Designed and manufactured for strength and quality, Clear zinc silver coating.Black coating is aimed to prevent rust.
- 2800 Flywheel/Flexplate Holding Tool, Steel, Black Oxide For Chevy/GM, LS1, LS2, LS3, LS6, Each.
- Easy to install , just bolts in place of your starter and locks securely into the flywheel teeth.
- Use on engine stand or in the vehicle. Bolts in place of starter. Clears all RWD bellhousings.
- See more on Amazon...
2800 Flywheel/Flexplate Holding Tool, Steel, Black Oxide For Chevy/Gm, Ls1, Ls2, Ls3, Ls6, Each..
Use On Engine Stand Or In The Vehicle. Bolts In Place Of Starter. Clears All Rwd Bellhousings..
Easy To Install , Just Bolts In Place Of Your Starter And Locks Securely Into The Flywheel Teeth..
100% Tig Welded , Designed And Manufactured For Strength And Quality, Clear Zinc Silver Coating.Black Coating Is Aimed To Prevent Rust..
Brand: MOEBULB | Manufacturer: MOE-BULB
See On Amazon #20
JOYOKYOPK LS Engine Flywheel Locking Tool Flexplate Locking Holder Tool Compatible for Chevy LS/1/2/3/LSX
Asin: B0C33MKM6P | Model: Flywheel Holding-1001-JOYO | PartNumber: Flywheel Holding-1001-JOYO
Features
- Conditon:High Quality and Aftermarket 100% Brand New
- Easy to install,just bolts in place of your starter and locks securely into the flywheel teeth
- Featured with high strength and reliability.Comes with two proper length bolts
- Compatible for 6.2 Chevrolet LS1 LS2 LS3 LS6 ,Gen V LT1 6.2L (2014 Late Models),L86 6.2L Truck (2014), LT4 6.2L Corvette Z06 (2015),L83 5.3L Truck (2014), LS1, 2, 3, LSX Engines
- Package Included:1 x Flywheel Locking Tool 2 x bolts
- See more on Amazon...
Featured With High Strength And Reliability.Comes With Two Proper Length Bolts.
Package Included:1 X Flywheel Locking Tool 2 X Bolts.
Compatible For 6.2 Chevrolet Ls1 Ls2 Ls3 Ls6 ,Gen V Lt1 6.2L (2014 Late Models),L86 6.2L Truck (2014), Lt4 6.2L Corvette Z06 (2015),L83 5.3L Truck (2014), Ls1, 2, 3, Lsx Engines.
Easy To Install,Just Bolts In Place Of Your Starter And Locks Securely Into The Flywheel Teeth.
Brand: JOYOKYOPK | Manufacturer: JOYOKYOPK
Warranty: 6 months warranty
See On Amazon #21
X AUTOHAUX 1 Set 2801 Flywheel Holder for BMW N20 N26 Engines Flex Plate Lock Tool for Replacing The Timing Chain 83302222742 for BMW 125i 220i 225i 228i 320i 328i X1 X3 X4 Auto Trans Only
Asin: B0B9QMXQ3R
Features
- [Replace number] 83302222742. Automatic transmissions ONLY.
- [Fitment] Fit for BMW N20 N26 engines. Used for locking the transmission flex plate in place for performing a timing service on N20/N26 engines as well as fix the crankshaft with the transmission installed (connect to engine).
- [Fucntion] While replacing the timing chain, this tool can hold the flywheel holder while releasing and torquing down the central bolt on the vibration damper hub.
- [Feature] Solid steel material with black poweder coating bring enough durability for anti-corrosion, wear resistance, anti rust, providing a long term service.
- [Package] Include 1 x 2801 Flywheel Holder, 2 x Screws M8*1.25, 2 x Washers. Install and lock it down by tightening the two bolts with a 13mm wrench.
- See more on Amazon...
[Fucntion] While Replacing The Timing Chain, This Tool Can Hold The Flywheel Holder While Releasing And Torquing Down The Central Bolt On The Vibration Damper Hub..
[Package] Include 1 X 2801 Flywheel Holder, 2 X Screws M8*1.25, 2 X Washers. Install And Lock It Down By Tightening The Two Bolts With A 13Mm Wrench..
[Feature] Solid Steel Material With Black Poweder Coating Bring Enough Durability For Anti-Corrosion, Wear Resistance, Anti Rust, Providing A Long Term Service..
[Fitment] Fit For Bmw N20 N26 Engines. Used For Locking The Transmission Flex Plate In Place For Performing A Timing Service On N20/N26 Engines As Well As Fix The Crankshaft With The Transmission Installed (Connect To Engine)..
Brand: X AUTOHAUX | Manufacturer: X AUTOHAUX
See On Amazon #22
Sealey VSE2394 Flywheel Locking Tool
Asin: B013WI0HLI | Model: VSE2394 | PartNumber: VSE2394 | Ean: 5051747960565, 5054630338472
Features
- It is often necessary to remove the crankshaft pulley when replacing the timing belt.
- The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal.
- Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing.
- Applications: Citroen, Fiat, FSO, LDV, Mercedes, Peugeot.
- Suitable for petrol and diesel engines.
- See more on Amazon...
Jamming Tools Into The Teeth Of The Flywheel Will Cause Serious Damage To Both Teeth And Housing..
Suitable For Petrol And Diesel Engines..
Applications: Citroen, Fiat, Fso, Ldv, Mercedes, Peugeot..
The Pulley Retaining Bolt Is Fitted With A High Torque Loading And The Flywheel Must Be Securely Locked During Installation/Removal..
First Available: 07/15/2015
Brand: Sealey | Manufacturer: Sealey
Dimensions: 0.66 x 0.66 x 3.23 Inches
See On Amazon #23
24mm 27mm Magneto Flywheel Puller and 20mm 24mm Clutch Lock Nut Spanner Tool for Honda Motorcycle ATV Dirt Bike
Asin: B087383757 | Ean: 0755641681056 | UPC: 755641681056
Features
- Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler
- Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike
- Stator magneto flywheel puller with 2 sizes:24mm&27mm
- Clutch lock tool Inner Diameter(upper): 20mm ; Inner Diameter(under): 24mm
- Package includes 1 Magneto Flywheel Puller, 1 Clutch lock tool
- See more on Amazon...
Stator Magneto Flywheel Puller With 2 Sizes:24Mm&27Mm.
Package Includes 1×Magneto Flywheel Puller, 1×Clutch Lock Tool.
Clutch Lock Tool Inner Diameter(Upper): 20Mm ; Inner Diameter(Under): 24Mm.
Flywheel Puller For Gy6 50Cc 125Cc 150Cc Yamaha Honda Suzuki Ktm Atv Scooter Dirt Bike.
Brand: Onbelon | Manufacturer: YTOOS
Dimensions: 1.18 x 3.54 x 1.57 Inches
See On Amazon #24
Yoursme 2801 Flywheel Holder for BMW N20 N26 Engines Flex Plate Lock Tool 83302222742 Great for Replacing The Timing Chain
Asin: B085RVCZWD | Model: N20 N26 | PartNumber: N20 N26 | Ean: 7427127151201
Features
- FITMENT: Works on BMW N20 and N26 engines. Used for securing the crankshaft with the transmission installed (connected to engine)
- FUNCTION: While replacing the timing chain, this tool can hold the flywheel; It helps to release and tighten down the central bolts on the vibration damper.
- REPLACEMENT: Comparable to BMW Factory Tool No. 83302222742. (Note: Automatic transmissions only.)
- SUPERIOR MATERIAL: Made from advanced heavy duty soild steel structure, durability and anti-corrosion, providing a long term service.
- 100% SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months Warranty. If you have any problems about our products, please feel free to contact us.
- See more on Amazon...
Replacement: Comparable To Bmw Factory Tool No. 83302222742. (Note: Automatic Transmissions Only.).
100% Satisfaction Guarantee: Yoursme Aims To Provide The Best Service For Our Customer, If You're Not 100% Satisfied With Our Item, Simply Return It For A Full Refund In 30 Days. We Support 12 Months’ Warranty. If You Have Any Problems About Our Products, Please Feel Free To Contact Us..
Superior Material: Made From Advanced Heavy Duty Soild Steel Structure, Durability And Anti-Corrosion, Providing A Long Term Service..
Function: While Replacing The Timing Chain, This Tool Can Hold The Flywheel; It Helps To Release And Tighten Down The Central Bolts On The Vibration Damper..
Brand: Yoursme | Manufacturer: Yoursme
See On Amazon #25
Universal Flywheel Holder, for Both 6 Volt and 12 Volt VW, Compatible with Dune Buggy
Asin: B0C6YHNWGN | Model: Flywheel Holder | PartNumber: Flywheel Holder
Features
- Compatible with VW Dune Buggies
- Universal Flywheel Holder for 6 volt and 12 volt VW
- Made of iron. Direct replacement, Flywheel holder bolts on through the case and will fit both 6 or 12 volt flyheels
- See more on Amazon...
Made Of Iron. Direct Replacement, Flywheel Holder Bolts On Through The Case And Will Fit Both 6 Or 12 Volt Flyheels.
Universal Flywheel Holder For 6 Volt And 12 Volt Vw.
Brand: Generic | Manufacturer: KINGAUTOPARTS
Warranty: 1 YEAR WARRANTY
See On Amazon #26
Engine Flywheel Locking Tool, Engine Flywheel Locking 09231 2B100 Steel Flywheel Fixed Holding Replacement for Car
Asin: B0B45M8QM9
Features
- OE Number: The referencing OE number of this locking kit is 09231 2B100, which is molded and designed depend on the original car data.
- Easy to Install: You just need to in place of your starter and locks securely into the flywheel teeth.
- Fitment: The engine flywheel holding is a repalcement for , repalcement for Kia, for more detailed information please refer to the parameters.
- Features: This tool ensures the crankshaft is locked to allow the crankshaft pulley, and flywheel to be removed and torqued without moving the crankshaft.
- Function: It's used for timing chain and engine rebuild use, which is made of high strength steel, robust and durable, not easy to break.
- See more on Amazon...
Fitment: The Engine Flywheel Holding Is A Repalcement For , Repalcement For Kia, For More Detailed Information Please Refer To The Parameters..
Function: It's Used For Timing Chain And Engine Rebuild Use, Which Is Made Of High Strength Steel, Robust And Durable, Not Easy To Break..
Features: This Tool Ensures The Crankshaft Is Locked To Allow The Crankshaft Pulley, And Flywheel To Be Removed And Torqued Without Moving The Crankshaft..
Easy To Install: You Just Need To In Place Of Your Starter And Locks Securely Into The Flywheel Teeth..
Brand: Uxsiya | Manufacturer: Uxsiya
See On Amazon #27
Yoursme 22100 Flywheel Locking Tool for 6.6L Duramax with 36mm 3/4'' Socket
Asin: B087CS7Y19 | Ean: 7427127150662
Features
- Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
- Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
- Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
- Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
- 36mm 12-point Socket: Use with 3/4 square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle.
- See more on Amazon...
Duramax 2500 / 3500 Pickups (Toothed Pieces Only): Removes Metal Spring-Loaded Inspection Plate On The Bottom Of The Transmission. Tool Should Slide Into Opening Toward Engine With The Top Of The Tool Engaging The Teeth Of The Flywheel..
36Mm 12-Point Socket: Use With 3/4" Square Drive To Remove Harmonic Balancer Bolt And Retorque On Installation. 36Mm 12 Point Socket Can Also Be Used On Axle..
Duramax 4500 / 5500 Trucks (Toothed Pieces With Screws): Remove The Rubber Inspection Cap On The Bottom Of The Transmission. Insert The Tool At The Front Of The Opening To Engage The Flywheel And Hand Tighten Bolt To Hold Tool In Place..
Function: Saves Time By Locking The Flywheel At The Transmission Instead Of Having To Remove The Starter For Water Pump Replacement..
Brand: Yoursme | Manufacturer: Yoursme
See On Amazon #28
EWK 36mm 3/4 Inch Flywheel Locking Holder Water Pump Holding Tool 12 Pt Socket for Duramax 6.6L Engine
Asin: B07B4WKDDR | Model: 10 | PartNumber: 10 | Ean: 0700587513862 | UPC: 700587513862
Features
- Exclusive Design The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
- Time Saver Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning.
- Easy to Use Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks.
- Heavy Duty Comes with flywheel holder OEM no.AM-J-44643-A, AM-J-44643-B, and 36 mm 12 point socket. Constructed of quality CR-V Steel with a manganese phosphate coating to resist rust and corrosion.
- 12+6 Month Durable products backed by an extraordinary 12+6 months warranty.
- See more on Amazon...
【 Easy To Use 】 Locks The Flywheel Easily To The Transmission When Changing Water Pump. The Flywheel Locking Tools Work With Duramax 2500 / 3500 Pickups And 4500 / 5500 Trucks..
【12+6 Month】Durable Products Backed By An Extraordinary 12+6 Months Warranty..
【 Heavy Duty 】Comes With Flywheel Holder Oem No.Am-J-44643-A, Am-J-44643-B, And 36 Mm 12 Point Socket. Constructed Of Quality Cr-V Steel With A Manganese Phosphate Coating To Resist Rust And Corrosion..
【 Time Saver 】Saves Time By Locking The Flywheel At The Transmission Instead Of Having To Remove The Starter For Water Pump Replacement. Easy To Install And Effectively Keep The Flywheel From Turning..
Brand: EWK | Manufacturer: EWK
Dimensions: 2.17 x 8.27 x 7.09 Inches
Warranty: 12+6 months warranty
See On Amazon #29
3mirrors LS Engine Flywheel Holding Locking Tool Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks
Asin: B08CH8M33Y | Ean: 7790262221963
Features
- FITMENT: This Engine Flywheel Locking Tool kit is compatible with all LS engines (all GM gen III, IV, and V engines).
- HIGH QUALITY: 100% brand new, precisely manufactured from high-quality materials with Zinc coating, durable and long service time. (Please rest assured that the latest products have been processed twice to prevent rust.)
- EASY INSTALLATION: You just need to put the bolts in the corresponding holes and tighten them, only takes a few minutes.
- PACKAGE INCLUDED: It comes with one holding tool starter and two bolts (FD 8.8, Pretty Tough & New Design), Better than others.
- Buy with confidence: A good handy tool can help you save time and money. We promise that it is 100% tested before shipping. If you have any questions, please feel free to contact us for help and a Satisfactory solution.
- See more on Amazon...
Easy Installation: You Just Need To Put The Bolts In The Corresponding Holes And Tighten Them, Only Takes A Few Minutes..
Buy With Confidence: A Good Handy Tool Can Help You Save Time And Money. We Promise That It Is 100% Tested Before Shipping. If You Have Any Questions, Please Feel Free To Contact Us For Help And A Satisfactory Solution..
Package Included: It Comes With One Holding Tool Starter And Two Bolts (Fd 8.8, Pretty Tough & New Design), Better Than Others..
High Quality: 100% Brand New, Precisely Manufactured From High-Quality Materials With Zinc Coating, Durable And Long Service Time. (Please Rest Assured That The Latest Products Have Been Processed Twice To Prevent Rust.).
Brand: 3mirrors | Manufacturer: 3mirrors
See On Amazon #30
OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool
Asin: B0949M63L8 | Model: 25556 | PartNumber: 25556 | Ean: 0076812255563 | UPC: 076812255563
Features
- SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate; Our turner helps you apply proper torque to nuts during flywheel installation
- COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently; This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft
- FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key; Lock your car s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs
- COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable; Let this flywheel turning wrench s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing; This flywheel tool folds for easy storage
- SPECIALTY WORKING TOOL: Other tools can t handle the pressure of removing your flywheel; Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts
- See more on Amazon...
Flywheel Holder: Removing Your Flywheel Bolt Or Torquing The Harmonic Balancer Bolts Can Be A Nightmare Without A Flywheel Key; Lock Your Car’S Flywheel Sprocket Or Flexplate In Position To Get Adequate Nut Torque For Removal And Installation Jobs.
Specialty Working Tool: Other Tools Can’T Handle The Pressure Of Removing Your Flywheel; Our Spring Tensioned Flywheel Remover Keeps Your Flywheel Turning Wrench Securely Engaged While Torquing The Harmonic And Car Flywheel Bolts.
Comfortable Flywheel Puller: Working Beneath Your Vehicle Is Uncomfortable; Let This Flywheel Turning Wrench’S Sure Grip Handle Keep You Locked On The Flywheel Teeth Without Hand Slippage During Torquing; This Flywheel Tool Folds For Easy Storage.
Complete Engine Access: Sometimes It Takes A Specialty Tool To Get All Of Your Engine Work Done Efficiently; This Flywheel Removal Tool Will Remove Flexplates And Flywheels So That You Can Service Clutches, Transmission, And Rotate The Crackshaft.
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: OEM Limited Lifetime
See On Amazon
Looking For Something Else?
Search