Best Snowboarding Stomp Pads - Buying Guide
Last Updated: 05/08/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
PEUTIER 2Sets of 6pcs Stomp Pad, Clear Anti-Skidding Snowboard Stomp Pads Snowboard Grip Pad for Snowboarding (Transparent)
Asin: B0CN2L9KGQ | Model: 22341 | PartNumber: 22341
Features
- Package Content: You will receive 2 sets of 6pcs snowboard stomp pads with two sets of tape, measuring about about 111x126 mm/ 4.3 x4.96 inches, fit for most snowboards. Ideal accessory for snowboarding in winter.
- Premium Material: The stomp pad is made of premium plastic material, sturdy and not easy to break or deform, providing a long service time.
- Flexible Design: The anti-skidding snowboard stomp pad is especially separated into 3 pieces, and you can freely adjust the distance among them according to your needs, very convenient and thoughtful.
- Practicality: The stomp pad has protruding spikes, which can offer nice grip and traction. Very practical accessory for snowboarding.
- How to Use: Coming with 2 sets of double-sided adhesive tape, it is easy to install: 1. use the alcohol to clean the ski and wait it dry; 2. Use a hair dryer to heat the tape for 2-3 minutes, then stick it in a warm room overnight to maximize its stickiness. 3. Peel off the protective film of the tape and paste it on the flat side of the stomp pad according to its shape; 4. Peel off the film on the other side and stick it on the ski, and please place the ski indoors for 24 hours.
- See more on Amazon...
Flexible Design: The Anti-Skidding Snowboard Stomp Pad Is Especially Separated Into 3 Pieces, And You Can Freely Adjust The Distance Among Them According To Your Needs, Very Convenient And Thoughtful..
How To Use: Coming With 2 Sets Of Double-Sided Adhesive Tape, It Is Easy To Install: 1. Use The Alcohol To Clean The Ski And Wait It Dry; 2. Use A Hair Dryer To Heat The Tape For 2-3 Minutes, Then Stick It In A Warm Room Overnight To Maximize Its Stickiness. 3. Peel Off The Protective Film Of The Tape And Paste It On The Flat Side Of The Stomp Pad According To Its Shape; 4. Peel Off The Film On The Other Side And Stick It On The Ski, And Please Place The Ski Indoors For 24 Hours..
Practicality: The Stomp Pad Has Protruding Spikes, Which Can Offer Nice Grip And Traction. Very Practical Accessory For Snowboarding..
Premium Material: The Stomp Pad Is Made Of Premium Plastic Material, Sturdy And Not Easy To Break Or Deform, Providing A Long Service Time..
Brand: PEUTIER | Manufacturer: PEUTIER
See On Amazon #2
Dakine Primo Stomp - Black, One Size
Asin: B07VCT7VLZ | Model: 10002703 | PartNumber: 10002703 | Ean: 0610934318401 | UPC: 610934318401
Features
- Dakine Friendly Foam biodegradable EVA foam, Light weight molded EVA surf traction
- Can be trimmed to customize as needed, Peel and stick adhesive
- 100% EVA
- 7 x 5.5 [ 180mm x 140mm ] - 1.4oz [ 40g ]
- See more on Amazon...
100% Eva.
7 X 5.5 [ 180Mm X 140Mm ] - 1.4Oz [ 40G ].
Can Be Trimmed To Customize As Needed, Peel And Stick Adhesive.
Brand: Dakine | Manufacturer: Dakine
Dimensions: 1.00 x 9.00 x 7.00 Inches | Weight: 0.09 Pounds
Warranty: Limited Warranty
See On Amazon #3
Stompgrip Premium Snowboard Stomp Pad | Hibiscus | 3D Collection | 3D Decal | Blue & Pink
Asin: B0CHJN8TR6 | Ean: 0840187517607 | UPC: 840187517607
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
See On Amazon #4
PEUTIER 2pcs Snowboard Stomp Pads, 3D Clear Snowflake Stomp Pads Snowboarding Antiskid Mat Snowboard Spike Stomp Grip Pad for Winter Snow Ice Ski Accessories
Asin: B0CN9HCRDC | Model: 22340 | PartNumber: 22340
Features
- Package Content: You will receive 2 pieces of clear snowflake stomp pads, comes with 2 adhesive tapes to sticks, ideal and practical accessory for snowboarding in winter.
- Premium Material: The stomp pad is made of premium plastic material, sturdy and not easy to break or deform, provide maximum grip and traction, and providing a long service time.
- Proper Size: The snowboard stomp pad snowflake measures about 13x13cm / 5.11x5.11 inch, which is a good size for easy carrying and storage.
- Exquisite Design: Designed in the shape of a snowflake, very exquisite and distinctive, with the protruding bumps that provide good grip and traction, very practical accessory for snowboards.
- Instructions: Coming with the double-sided adhesive tape, it is easy to install: 1. Clean the skis with alcohol and wait for it to dry; 2. heat the adhesive tape with a hair dryer for 2-3 minutes; 3. Tear off the protective film of tape and paste it on the flat side of the stomp pad according to its shape; 4. Peel off the film on the other side and stick it on the ski, and please keep the ski indoors for 24 hours.
- See more on Amazon...
Proper Size: The Snowboard Stomp Pad Snowflake Measures About 13X13cm / 5.11X5.11 Inch, Which Is A Good Size For Easy Carrying And Storage..
Instructions: Coming With The Double-Sided Adhesive Tape, It Is Easy To Install: 1. Clean The Skis With Alcohol And Wait For It To Dry; 2. Heat The Adhesive Tape With A Hair Dryer For 2-3 Minutes; 3. Tear Off The Protective Film Of Tape And Paste It On The Flat Side Of The Stomp Pad According To Its Shape; 4. Peel Off The Film On The Other Side And Stick It On The Ski, And Please Keep The Ski Indoors For 24 Hours..
Exquisite Design: Designed In The Shape Of A Snowflake, Very Exquisite And Distinctive, With The Protruding Bumps That Provide Good Grip And Traction, Very Practical Accessory For Snowboards..
Premium Material: The Stomp Pad Is Made Of Premium Plastic Material, Sturdy And Not Easy To Break Or Deform, Provide Maximum Grip And Traction, And Providing A Long Service Time..
Brand: PEUTIER | Manufacturer: PEUTIER
Weight: 0.18 pounds
See On Amazon #5
XCMAN Snowboard Clear Aluminum Spike Stomp Pad Anti-Slip,Provides Extra Grip and Pperfect Traction with 3M Adhesives 5.1 x 4.3 inch
Asin: B08CCWCKTR | Ean: 0724268525777 | UPC: 724268525777
Features
- Clear aluminum Spike stomp pad has a transparent traction mat so the graphics of your snowboard won t be covered. It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.
- MODULAR AND CONFIGURABLE MAT STOMP:10pcs aluminum spikes on stomp pad Provides Extra Grip and perfect Traction, easily cut 2pcs configurable pieces and moved to perfect traction, where you need it.
- QUICK & EASY APPLICATION:3M Peel,stick adhesives and a adhesion promoter that for Using to increase the bond strength of snowboard surface.
- MAXIMUM TRACTION:The aluminum spike design creates extra grip for maximum traction when out on the slopes.
- BIG SIZE:The size of this pad : 5.1 x 4.3 inches, big enough to provide enough grid and yet it could still fit nicely on the board.
- See more on Amazon...
Quick & Easy Application:3M Peel,Stick Adhesives And A Adhesion Promoter That For Using To Increase The Bond Strength Of Snowboard Surface..
Big Size:The Size Of This Pad : 5.1 X 4.3 Inches, Big Enough To Provide Enough Grid And Yet It Could Still Fit Nicely On The Board..
Maximum Traction:The Aluminum Spike Design Creates Extra Grip For Maximum Traction When Out On The Slopes..
Modular And Configurable Mat Stomp:10Pcs Aluminum Spikes On Stomp Pad Provides Extra Grip And Perfect Traction, Easily Cut 2Pcs Configurable Pieces And Moved To Perfect Traction, Where You Need It..
Brand: XCMAN | Manufacturer: XCMAN(XIAMEN)INDUSTRY&TRADE CO.,LTD
See On Amazon #6
PEUTIER 100pcs Anti-Slip Snowboard Stomp Pads Mat, Self-Adhesive Spike Snowboarding Step Pad Extra Grip Pad Winter Ski Accessories (Clear, Black)
Asin: B0CLNGLJM7 | Model: 25258 | PartNumber: 25258
Features
- Package Content: You will receive 100 pieces of snowboard stomp pads in clear and black, each color 50 pieces, which are about 13.5x13.5x5mm/0.53x0.53x0.2in, enough to meet your needs, and they are ideal accessories for snowboards.
- Premium Material: The stomp pad is made of non-skidding silicone, which is reliable and long-lasting. can give you a better skiing experience even in bad weather conditions.
- Enhanced Control: Our foot pads are friction-resistant, non-skidding, and waterproof to enhance your control of your board when your back foot is free. quality silicone material provides you with a better grip.
- Thoughtful Design: A small area stomp pad will not ruin the ski design like a large one. Clear stomp pads ensure your ski's design remains intact. In addition, we are equipped with black stomp pads that you can use together to add a sense of fashion.
- Self-Adhesive: The stomp pads are designed with an adhesive back, you need to tear off the backing and stick it where you want. Before installation, please clean the. It's also easy to peel off, leaving no dirt.
- See more on Amazon...
Enhanced Control: Our Foot Pads Are Friction-Resistant, Non-Skidding, And Waterproof To Enhance Your Control Of Your Board When Your Back Foot Is Free. Quality Silicone Material Provides You With A Better Grip..
Self-Adhesive: The Stomp Pads Are Designed With An Adhesive Back, You Need To Tear Off The Backing And Stick It Where You Want. Before Installation, Please Clean The. It's Also Easy To Peel Off, Leaving No Dirt..
Thoughtful Design: A Small Area Stomp Pad Will Not Ruin The Ski Design Like A Large One. Clear Stomp Pads Ensure Your Ski's Design Remains Intact. In Addition, We Are Equipped With Black Stomp Pads That You Can Use Together To Add A Sense Of Fashion..
Premium Material: The Stomp Pad Is Made Of Non-Skidding Silicone, Which Is Reliable And Long-Lasting. Can Give You A Better Skiing Experience Even In Bad Weather Conditions..
Brand: PEUTIER | Manufacturer: PEUTIER
Weight: 0.11 Pounds
See On Amazon #7
Dakine Circle Mat Stomp Pad - Night Tropical
Asin: B0B3L51CFS | Model: 10001576 | PartNumber: 10001576 | Ean: 0194626465999 | UPC: 194626465999
Features
- Molded urethane
- Peel and stick adhesive
- 100% TPU
- 4.3 x 4.3 [ 110mm x 110mm ] - .8 oz. [ 23g ]
- See more on Amazon...
100% Tpu.
4.3 X 4.3 [ 110Mm X 110Mm ] - .8 Oz. [ 23G ].
Peel And Stick Adhesive.
Brand: Dakine | Manufacturer: 10001576
Dimensions: 1.00 x 7.00 x 6.00 inches | Weight: 0.11 Pounds
Warranty: 2 Year Limited Warranty
See On Amazon #8
STAGE Scraper Stomp Pad
Asin: B00P45HXSS | Model: STGT-015 | PartNumber: STGT-015 | Ean: 0739792902475 | UPC: 739792902475
Features
- Clear stomp pad doesn't cover up graphics
- Raised ridge in center for traction and scraping snow from boot sole
- All weather adhesive keeps the pad in place
- Clear stomp pad doesn't cover up graphics
- Raised ridge in center for traction and scraping snow from boot sole
- All weather adhesive keeps the pad in place
- See more on Amazon...
All Weather Adhesive Keeps The Pad In Place.
Raised Ridge In Center For Traction And Scraping Snow From Boot Sole.
All Weather Adhesive Keeps The Pad In Place.
Clear Stomp Pad Doesn't Cover Up Graphics.
Raised Ridge In Center For Traction And Scraping Snow From Boot Sole.
Brand: STAGE | Manufacturer: HRP Distributing
Weight: 0.11 Pounds
Warranty: 1 year Warranty
See On Amazon #9
Volcom Mini Stone Snowboard Stomp Pad, Black S4, Each
Asin: B0BMQJ2SSF | Model: NN6752400-BLK | PartNumber: NN6752400-BLK | Ean: 0196134555438 | UPC: 196134555438
Pack Of 4 Stones.
Peel And Stick Using 3M Adhesive Backing.
Brand: Volcom | Manufacturer: Volcom
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #10
Stompgrip Premium Snowboard Stomp Pad | Dice | Vice Collection | 3D Decal | Clear
Asin: B0CJB2NK7V | Ean: 0840187522007 | UPC: 840187522007
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
See On Amazon #11
XCMAN Snowboard Traction Stomp Pad, 3D Clear Snowflake Snowboarding Stomp Pads, PVC Material(Clear/Pink/Blue) (Clear)
Asin: B0C6LMTZZD
Features
- Clear snowboard Traction Stomp Pad has a transparent traction mat so the graphics of your snowboard won t be covered. It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.
- MAXIMUM TRACTION:Special 3D bumps design creates extra grip for maximum traction when out on the slopes.
- QUICK & EASY APPLICATION:3M Peel and stick adhesives.
- BIG SIZE: 5.11 x 4.53; Material: PVC,3M adhesive
- See more on Amazon...
Quick & Easy Application:3M Peel And Stick Adhesives..
Big Size: 5.11" X 4.53"; Material: Pvc,3M Adhesive.
Maximum Traction:Special 3D Bumps Design Creates Extra Grip For Maximum Traction When Out On The Slopes..
Brand: XCMAN | Manufacturer: XCMAN
See On Amazon #12
Stomp Pad oneballjay The Dude Traction
Asin: B01LRLGDZ6 | Ean: 0765857243184 | UPC: 765857243184
Brand: One Ball Jay | Manufacturer: one ball
Weight: 0.12 Pounds
See On Amazon #13
Grayne New Metal Studded Scraper Snowboard Stomp Pad Superior Grip Clear
Asin: B07V1YGL3S | Ean: 7753636568224
Features
- Grayne Metal Studded Scraper Stomp Pad : The Stomp Pad that never wears out! The Grayne Metal Studded Scraper Stomp Pad is made with superior adhesives that are specifically designed to function in snowboarding conditions!
- Dimensions: 5.75 X 3
- Item shipped in different packaging
- See more on Amazon...
Item Shipped In Different Packaging.
Dimensions: 5.75" X 3".
Brand: Grayne | Manufacturer: Grayne
See On Amazon #14
Volcom Men's Snow Stone Large Snowboard Stomp Pad, Military S4, Each
Asin: B0BMQJZNSG | Model: L6752400-MIL | PartNumber: L6752400-MIL | Ean: 0196134557463 | UPC: 196134557463
Peel And Stick Using 3M Adhesive Backing.
Brand: Volcom | Manufacturer: Volcom
See On Amazon #15
Volcom Stone Studs Pack of 6 Snow Stomp Pads, Orange Shock S3, Each
Asin: B09MCT6NT8 | Model: K6752300-OSH | PartNumber: K6752300-OSH | Ean: 0196134164029 | UPC: 196134164029
Pack Of 6 Studs.
Brand: Volcom | Manufacturer: Volcom
See On Amazon #16
Beartooth Trading Snowboard Stomp Pad - Made from Sustainable Wood - 3" x 7" Surface Area - Unique Design and Style That Fits Any Board - Stand Out on The Slopes
Asin: B0CP4D79KG | Model: BT11002 | PartNumber: BT11002
Features
- Made of sustainable Rubberwood, a byproduct from latex production.
- Wide surface area of 3 x 7 makes it easy to locate on your board.
- Unique natural feel and look - stand out on the slopes.
- Attaches to any snowboard surface with superior 3M VHB tape.
- Designed in Montana by snowboarders.
- See more on Amazon...
Unique Natural Feel And Look - Stand Out On The Slopes..
Designed In Montana By Snowboarders..
Attaches To Any Snowboard Surface With Superior 3M Vhb Tape..
Wide Surface Area Of 3" X 7" Makes It Easy To Locate On Your Board..
Brand: Beartooth Trading | Manufacturer: Beartooth Trading
Dimensions: 0.65 x 7.00 x 3.00 inches
Warranty: No Warranty
See On Amazon #17
devembr Snowboard Stomp Pad, 3D Clear Snowflake Snowboarding Stomp Pads, PVC Material, 5.11" x 5.9", Transparent Pattern
Asin: B0BGS8K46T | Model: Stomp pad trandsparent-L | PartNumber: Stomp pad trandsparent-L
Features
- Unique Design: Fantastic snowflake pattern adds more fun to your snowboarding trips
- Maximum Traction: Special 3D bumps on the stomp pad provide maximum grip and traction
- Easy to Install: Peel & stick adhesive backing for easy application
- Size: 5.11 x 5.9
- Material: PVC
- See more on Amazon...
Easy To Install: Peel & Stick Adhesive Backing For Easy Application.
Material: Pvc.
Size: 5.11" X 5.9".
Maximum Traction: Special 3D Bumps On The Stomp Pad Provide Maximum Grip And Traction.
Brand: devembr | Manufacturer: devembr
See On Amazon #18
Stompgrip Premium Snowboard Stomp Pad | Polly | 3D Collection | 3D Decal | Black
Asin: B0CHJMBDZ4 | Ean: 0840187517560 | UPC: 840187517560
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
See On Amazon #19
Stompgrip Premium Snowboard Stomp Pad | Good Trip | Vice Collection | 3D Decal | Clear
Asin: B0CJB1NTK8 | Ean: 0840187521932 | UPC: 840187521932
Features
- PREMIUM QUALITY SNOWBOARD STOMP PADS: Stompgrip's premium snowboard Stomp Pads are designed to clear snow and ice from your snowboard boot before strapping into your bindings, give riders control when skating through the flats and lift lines, provide traction for your free foot when entering or exiting the lift and when stomping one-footed landings and tricks.
- 3D DESIGN & FUNCTION: Stompgrip s Stomp Pads are 3D CAD designed, and injection molded in unique shapes with multiple traction profiles available to choose from which provide varying levels of grip and protection. Stompgrip Stomp Pads have a unique, rounded-edge design to prevent peeling off snowboards under extreme use versus being die cut with rough edges that can catch or snag on boots.
- EASY INSTALLATION: For your convenience, we provide product installation videos that offer easy to follow, step-by-step instructions with tips and tricks to make installation easy. Just follow the installation instructions, it usually takes 10-15 minutes to complete a Stomp Pad installation.
- TRUST & CONFIDENCE: All products are same-day, made-to-order, when ordering direct from the manufacturer. Always look for Sold by STOMPGRIP to ensure you are buying the freshest adhesives available as adhesives are perishable and have a limited shelf life. Always confirm that the MANUFACTURED: MONTH / YEAR stamp on the back of the package is within the warranty time frame for your purchase prior to installation. All products are covered by Stompgrip's manufacturer warranty.
- MADE IN THE USA: Since 1994 all Stompgrip products have been manufactured in its Huntington Beach, California USA warehouse and shipped worldwide. All Stomp Pads are manufactured using the highest quality plastics formulated to meet our customers needs combined with the strongest 3M adhesives available.
- See more on Amazon...
Easy Installation: For Your Convenience, We Provide Product Installation Videos That Offer Easy To Follow, Step-By-Step Instructions With Tips And Tricks To Make Installation Easy. Just Follow The Installation Instructions, It Usually Takes 10-15 Minutes To Complete A Stomp Pad Installation..
Made In The Usa: Since 1994 All Stompgrip Products Have Been Manufactured In Its Huntington Beach, California Usa Warehouse And Shipped Worldwide. All Stomp Pads Are Manufactured Using The Highest Quality Plastics Formulated To Meet Our Customers’ Needs Combined With The Strongest 3M Adhesives Available..
Trust & Confidence: All Products Are Same-Day, Made-To-Order, When Ordering Direct From The Manufacturer. Always Look For “Sold By Stompgrip” To Ensure You Are Buying The Freshest Adhesives Available As Adhesives Are Perishable And Have A Limited Shelf Life. Always Confirm That The Manufactured: Month / Year Stamp On The Back Of The Package Is Within The Warranty Time Frame For Your Purchase Prior To Installation. All Products Are Covered By Stompgrip's Manufacturer Warranty..
3D Design & Function: Stompgrip’S Stomp Pads Are 3D Cad Designed, And Injection Molded In Unique Shapes With Multiple Traction Profiles Available To Choose From Which Provide Varying Levels Of Grip And Protection. Stompgrip Stomp Pads Have A Unique, Rounded-Edge Design To Prevent Peeling Off Snowboards Under Extreme Use Versus Being Die Cut With Rough Edges That Can Catch Or Snag On Boots..
Brand: Stompgrip | Manufacturer: Stompgrip
Dimensions: 10.50 x 6.50 x 0.50 inches
See On Amazon #20
Toejamr Snowboard Stomp Pad - ACE of Spades - Gray
Asin: B00T3HYR4Q | Ean: 0638845384421 | UPC: 638845384421
Features
- Adds traction to your loose foot when skating over to a lift, won't slip when you step on your board.
- 3 Year Replacement Warranty
- FULL SIZE PAD - 8 x 5
- Simply peel and stick with high tack cold formula PSA adhesive.
- Ultra-Light for more air time.
- See more on Amazon...
Full Size Pad - 8" X 5".
Ultra-Light For More Air Time..
Simply Peel And Stick With High Tack Cold Formula Psa Adhesive..
3 Year Replacement Warranty.
Brand: Toejamr | Manufacturer: Evateak
Dimensions: 5.00 x 8.00 x 0.50 inches | Weight: 0.11 Pounds
See On Amazon
Looking For Something Else?
Search