3Dman - Buying Guide
Last Updated: 05/06/2024
Share on
Bestselling from 3Dman on Amazon
- 3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wirin...
- 3Dman Filament Welder Connector, Broken Filament Connector Sensor for 1.75mm Filament 3D Printers, Red
- 3DMAN 3D Touch Auto Bed Leveling Sensor for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, En...
- 3Dman PC4-M10 Male Straight Pneumatic PTFE Tube Push in Quick Fitting Connector for E3D V6 Long-Dist...
- 3Dman Dual Drive Bowden Extruder Universal Geared Extruders for Ender 3 V2, Ender 3 Pro, Ender 3 Ser...
- 3Dman GT2 Pulley 20 Teeth 5mm bore for 6mm Width 20T Timing Belt Pulley Wheel Aluminum for 3D Printe...
- 3DMAN Heatbed Silicone Leveling Column, Solid Bed Mounts 12 PCS 18mm+ 4 PCS 16mm Stable Hotbed Tool ...
- 3DMAN GT2 Timing Belt Aluminum Gear Clamp Mount Block 9X40mm for Width 6mm 3D Printers (10PCS)
- 3Dman GT2 Timing Belt Closed Loop Rubber Belt 200mm for Width 6mm for 3D Printers -10pcs
- 3Dman Dual Gear Extruder Drive Feeder Upgrate for Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 P...
#1
3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs
Asin: B07RQV2NPN | Ean: 0712317284362 | UPC: 712317284362
Widely Used: 3D Printers, Computer, Home Appliance Or Diy Small Project On Power Supply Distribution And Control..
Plug Type : 3 Pin Iec320 C14..
L X W X H : 5.8 X 4.8 X 3.4Cm / 2.3" X 1.9" X 1.3"..
Inlet Module: Standard Iec320 C14; Installed Fuse: 10A; Rocker Switch: Illuminated To Show Power Status, 6A 250V Ac 10A 125V Ac..
Features
- Pay Attention to: This On/Off Power Socket Switch is installed well in a whole set, it can be used directly when get it , Safe & Convenient for adding 3pcs wires.
- Inlet Module: Standard IEC320 C14; Installed Fuse: 10A; Rocker Switch: illuminated to show power status, 6A 250V AC 10A 125V AC.
- Widely Used: 3D Printers, Computer, home appliance or DIY small project on power supply distribution and control.
- L x W x H : 5.8 x 4.8 x 3.4cm / 2.3 x 1.9 x 1.3.
- Plug Type : 3 Pin IEC320 C14.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #2
3Dman Filament Welder Connector, Broken Filament Connector Sensor for 1.75mm Filament 3D Printers, Red
Asin: B08XW8BFR4 | Ean: 0791738580406 | UPC: 791738580406
Wide Range Of Applications For Most 1.75Mm Filaments: Pla/Abs/Petg/Pc/Pp/Pvb/Hips, Etc. Allen Key × 1..
Frq: Why Is The Aperture Of The Connector Received Larger At One End And Smaller At The Other End? Is It Not Done Well In The Factory? A: When Connecting, Please Push From The Small End To The Large End. This Is The Design Of The Connector..
Frq: Why Can't I Get It All Right? A: Please Check If The Filaments Are Damp And Of The Same Material. Take A Look At The Video And Practice More. I Believe Most Of The Clients Will Succeed..
Note: Filament Often Lose Water And Become Brittle When Exposed To The Air For A Long Time. In Order To Prevent The Filament From Becoming Brittle, Please Keep It Sealed.
Frq: Why Is The Received Connector Aperture Larger Than The Standard 1.75? A: When Using The Lighter To Heat, The Consumables Expand When They Meet The Heat, So The Aperture Needs To Be Designed A Little Larger, Otherwise The Connection Is Not Easy To Succeed;.
Note: The Nylon Displayed In Pictures Is Just For Reference ,Not Included In The Package..
Print Models In Multiple Colors: Different Colors Of The Same Filament Can Be Connected To Print Out A Multi-Level Model..
Features
- Refuse filament waste: If the filament is disconnected during printing, or there is surplus material after printing, which is not enough to print a model, it can be connected to continue printing.
- Print models in multiple colors: different colors of the same filament can be connected to print out a multi-level model.
- Wide range of applications for most 1.75mm filaments: PLA/ABS/PETG/PC/PP/PVB/HIPS, etc. Allen Key 1.
- NOTE: The nylon displayed in pictures is just for reference ,NOT included in the package.
- NOTE: Filament often lose water and become brittle when exposed to the air for a long time. In order to prevent the filament from becoming brittle, please keep it sealed
- FRQ: why is the received connector aperture larger than the standard 1.75? A: when using the lighter to heat, the consumables expand when they meet the heat, so the aperture needs to be designed a little larger, otherwise the connection is not easy to succeed;
- FRQ: why is the aperture of the connector received larger at one end and smaller at the other end? Is it not done well in the factory? A: when connecting, please push from the small end to the large end. This is the design of the connector.
- FRQ: why can't I get it all right? A: please check if the Filaments are damp and of the same material. Take a look at the video and practice more. I believe most of the clients will succeed.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
Weight: 0.11 pounds
See On Amazon #3
3DMAN 3D Touch Auto Bed Leveling Sensor for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers
Asin: B08SK62RMR | Ean: 0791738580352 | UPC: 791738580352
The Main Functions And Controls Of 3D Touch Are The Same As Most Auto Bed Leveling Sensors, Which Consists Of A Rc Servo And A Micro Switch,Thus,3D Printer Touch Can Be Used On Almost Every 3D Printer Control Board..
By Using Progressively Designed Solenoid And Hall Sensor, It Can Integrate High Precision In Such A Simple Structure.To Make It More User-Friendly And To Bring You More Enjoyable Printing Experience..
Note: Pulling/Pushing Hardly On The Push-Pin May Damage Touch Sensor And Make It Less Accurate. Any Problem When You Receive The Order, Contact Us First Please!.
Features Simple, Smart And Precise. It Could Work With Nearly Any Kind Of Bed Materials, Such As Glasses, Woods, Metals And So On. The Position Of The Point Can Be Obtained By Touching The Point On The Heated Bed, And Then Compensated By Adjusting The Z-Axis Height During Printing..
Features
- The 3D Touch auto leveling sensor is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
- Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
- The main functions and controls of 3D touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D printer touch can be used on almost every 3D printer control board.
- NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate. Any problem when you receive the order, CONTACT US FIRST please!
- By using progressively designed solenoid and hall sensor, it can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #4
3Dman PC4-M10 Male Straight Pneumatic PTFE Tube Push in Quick Fitting Connector for E3D V6 Long-Distance Bowden Extruder 3D Printer Parts (20pcs)
Asin: B086W9HZDK | Ean: 0821907113309 | UPC: 821907113309
The Upper Part(Black) Can Be Inserted 4Mm Ptfe Tube And Self-Locking..
Ptfe Tubing Outer Diameter: 4 Mm. Thread: 9.7 Mm..
Good Fittings And High Performance..
Made Of High Quality Stainless Steel, Oxidation Resistant And Rust Resistant, Increase The Life..
Features
- 20 x PC4-M10 pneumatic male straight quick connector for E3D V6 long-distance bowden extruder 3D printer. for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer.
- Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life.
- The upper part(black) can be inserted 4mm PTFE tube and self-locking.
- Good fittings and high performance.
- PTFE Tubing Outer Diameter: 4 mm. Thread: 9.7 mm.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #5
3Dman Dual Drive Bowden Extruder Universal Geared Extruders for Ender 3 V2, Ender 3 Pro, Ender 3 Series, CR10 Series, Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer
Asin: B08PBY4YDL | Ean: 0791738580222 | UPC: 791738580222
Reduction Gear Device: It Can Give Out More Torque,Reduce The Burden Of The Motor, Extend The Life Of The Motor..
We Recommend E-Steps: 385. Any Problem When You Receive The Order, Contact Us First Please!.
For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, Cr10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 And Diy 3D Printer..
Fastening Spring Device: Bowden Extruder Allows The User To Fine-Tune The Tightness With Screw Nut To Fit With The Most Filament, Such As Pla/Abs/ Petg/ Tpu/Nylon/Carbon Fiber/Wood..
Features
- Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength.
- Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD.
- Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor.
- For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer.
- We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #6
3Dman GT2 Pulley 20 Teeth 5mm bore for 6mm Width 20T Timing Belt Pulley Wheel Aluminum for 3D Printers - 10 PCS
Asin: B085XLRXS1 | Ean: 0821907021444 | UPC: 821907021444
For Gt2 6Mm Width Belt, Easy To Install.
Widely Used In 3D Printer, Cnc, Milling Machine, Gear Forming Machine, Drilling Machine, Cnc Machine Tool Lathe, Hobbing Machine Or Other Mechanical Transmission Occasions..
High Quality Aluminum, Excellently Machined, Finished Smoothly.
20 Teeth 5Mm Bore Aluminum Gt2 Timing Belt Pulley.
Features
- GT2 Synchronous Wheel, with Screw, Can be Fixed.
- 20 Teeth 5mm Bore Aluminum GT2 Timing Belt Pulley
- For GT2 6mm Width Belt, Easy to install
- High Quality Aluminum, Excellently Machined, Finished Smoothly
- Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #7
3DMAN Heatbed Silicone Leveling Column, Solid Bed Mounts 12 PCS 18mm+ 4 PCS 16mm Stable Hotbed Tool Heat-Resistant Silicone Buffer for 3D Printers (16 PCS)
Asin: B0BL6ZBVF7
【Function】Larger Contact Surface Than Spring, Reduce Shock, Heatbed Silicone Leveling Column Better To Level Your 3D Printer..
【Package】16 Pcs Heatbed Silicone Leveling Column. For 3D Printer Hot Bed / Platform Bottom Connection, Can Replace The Original Spring Leveling.
【Size】Height: 12 Pcs 18Mm + 4 Pcs 16Mm. There Is A Bed Cable Cage At The Left Rear Of The Creality Ender 3D Printer Series.Short Column Will Fit There, And Other 3D Printer Series Take 4 High Columns..
【Application】Replace Original Spring Leveling For Creality 3D Printer Hot Bed/ Platform. The 1/4 Quantity In The Package Is A Short Column..
Features
- Upgrade Major upgrade from the original leveling spring - Now you spend much less time leveling your 3D Printer bed. Once you get level, you won't need to re-adjust for quite a while. Effectively avoid layer shifts caused by bed shaking during printing. The trick is that the short mount needs to go ON TOP of the strain relief, not under it.
- Application Replace original spring leveling for Creality 3D Printer Hot Bed/ Platform. The 1/4 quantity in the package is a short column.
- Function Larger contact surface than spring, reduce shock, heatbed silicone leveling column better to level your 3D printer.
- Size Height: 12 pcs 18mm + 4 pcs 16mm. There is a Bed Cable cage at the left rear of the Creality Ender 3D Printer series.short column will fit there, and other 3D printer series take 4 high columns.
- Package 16 PCS heatbed silicone leveling column. For 3D printer hot bed / platform bottom connection, can replace the original spring leveling
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #8
3DMAN GT2 Timing Belt Aluminum Gear Clamp Mount Block 9X40mm for Width 6mm 3D Printers (10PCS)
Asin: B08XVVQW6G | Ean: 0791738580413 | UPC: 791738580413
Pitch: 1.1Mm (The Groove Part)..
Material: Oxidation Treatment Aluminium Alloy. Widely Used In 3D Printer, Cnc, Milling Machine, Gear Forming Machine, Drilling Machine, Cnc Machine Tool Lathe, Hobbing Machine Or Other Mechanical Transmission Occasions..
Tooth Width: 0.85 Mm, Depth Of The Tooth: 0.9 Mm..
Size: 9 * 40Mm, The Middle Hole M4 Is Fixing Hole..
Features
- Used in open belt closures for 2GT(and some other models) 6mm belt.
- Size: 9 * 40mm, the middle hole M4 is fixing hole.
- Pitch: 1.1mm (the groove part).
- Tooth width: 0.85 mm, Depth of the tooth: 0.9 mm.
- Material: Oxidation Treatment Aluminium Alloy. Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #9
3Dman GT2 Timing Belt Closed Loop Rubber Belt 200mm for Width 6mm for 3D Printers -10pcs
Asin: B07V6N32B1 | Ean: 0821906956389 | UPC: 821906956389
The Timing Belt Is Made Of Premium Rubber, More Durable And Flexible..
Package Included: 10×200Mm Gt2 Timing Belt. Widely Used In 3D Printer, Cnc, Milling Machine, Gear Forming Machine, Drilling Machine, Cnc Machine Tool Lathe, Hobbing Machine Or Other Mechanical Transmission Occasions..
20 Teeth Contact With The Belt, That Minimizes The Chance Of The Belt Slipping. It Gives Better Smoothness And Accuracy Of Positioning..
Circular Arc Tooth Profile Tooth Space Is Small, Suitable For Straight Line Driving..
Features
- 2GT System is an extension of the HTD system with greater load carrying capacity.
- Circular arc Tooth Profile Tooth Space is Small, Suitable for Straight Line Driving.
- The timing belt is made of premium rubber, more durable and flexible.
- 20 Teeth contact with the belt, that minimizes the chance of the belt slipping. It Gives Better Smoothness and Accuracy of Positioning.
- Package Included: 10 200mm GT2 timing belt. Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #10
3Dman Dual Gear Extruder Drive Feeder Upgrate for Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers
Asin: B08PBWJW7F | Ean: 0791738580215 | UPC: 791738580215
All-Metal Aluminum Alloy, High Quality Dual Gear Extrusion, Compare To The Normal Plastic Drive, This High Aluminum Metal Dual Gear Extruder Is Stable And Durable..
Note : Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use; For 3D Printers With Filament Detector, As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height; For Vyper Users, Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse..
The Product Material Adopts Brand-New Imported Aviation Aluminum Material, And Is Processed By Cnc Imported From Japan. Diy：You Can Simply Install It By Yourself..
Note: Compatible With Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, Cr10 Series And Other 3D Printers. Only Suit For 3D Printers With Motor Shaft Over 20Mm, Please Measure The Shaft Length Before Placing The Order..
Features
- Double-gear and double-pneumatic joint extrusion structure, high extrusion force, enhancing the feed strength , ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.
- NOTE: Compatible with Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers. ONLY suit for 3d printers with motor shaft over 20mm, please measure the shaft length before placing the order.
- All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal dual gear extruder is stable and durable.
- The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan. DIY You can simply install it by yourself.
- NOTE : Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use; for 3d printers with filament detector, as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height; for Vyper users, please swap the motor wire sequence to make it turn forward instead of reverse.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #11
3Dman 24V 50W Heater Cartridge 620 Heating Tube HT-NTC100K Thermistor 1M for 3D Printers Sensor Heater Block V6 J-Head Hotend (5 Pcs)
Asin: B08PBXZXVX | Ean: 0791738580178 | UPC: 791738580178
From The Original 40W Power Up To 50W, Therefore, The Maximum Temperature Increases From 300-310℃ To 340-350℃ Or So..
24V 50W Heater Cartridge 620 Heating Tube Ht-Ntc100k Thermistor 1M For 3D Printers Sensor Heater Block V6 J-Head Hotend (5 Pcs). Can Be Used With The New Sensor Heater Block (Temperature Measurement Can Be Up To 350 Degrees)..
The New Version Heater Used In All Imported Skills, The Use Of 304 Stainless Steel, With The Internal Use Of 2080 Nickel Chrome Wire To Achieve Maximum Service Life..
From The Original Ordinary 0.3-Line High-Temperature Line To 0.6-Line Thick White High-Temperature Line, Can Bear Higher Temperature, And Looks More Beautiful..
Features
- Voltage: 24V, Power: 50W, Head diameter: 6mm, Head length: 20mm, Total length:1 Meter.
- From the original ordinary 0.3-line high-temperature line to 0.6-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- From the original 40W power up to 50W, therefore, the maximum temperature increases from 300-310 to 340-350 or so.
- The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
- 24V 50W Heater Cartridge 620 Heating Tube HT-NTC100K Thermistor 1M for 3D Printers Sensor Heater Block V6 J-Head Hotend (5 Pcs). Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #12
3Dman Extruder Back Support Plate with 3pcs 2020V POM Pulley for 3D Printers
Asin: B08SK4H1S6 | Ean: 0791738580321 | UPC: 791738580321
Pulley Diameter: About 24Mm/ 0.9 Inch. Pulley Height: About 11Mm/ 0.4 Inch..
Exact Replacement For The Stock Carriage Plate. Nice That New Wheel Assemblies Were Also Included..
Material: Back Plate Is Made Of High Quality Cold Rolled Sheet Material, Pulley Is Made Of High Quality Polyformaldehyde, Very Durable And Smoothy..
Suitable For 2020 V-Series Aluminum Profiles, Adjust The Sliding Smoothness By Adjusting The Hex Eccentric Column..
Features
- Necessary accessories, compatible with Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers.
- Suitable for 2020 V-series aluminum profiles, adjust the sliding smoothness by adjusting the hex eccentric column.
- Pulley Diameter: about 24mm/ 0.9 inch. Pulley Height: about 11mm/ 0.4 inch.
- Material: Back Plate is made of high quality cold rolled sheet material, pulley is made of high quality polyformaldehyde, very durable and smoothy.
- Exact replacement for the stock carriage plate. Nice that new wheel assemblies were also included.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #13
3Dman T8 Anti-Backlash Spring Loaded Nuts Elimination Gap Nut Z-axis for Upgrade Ender 3 Ender 3s Ender 3 Pro V2 CR-10 Tornado 3D Printer 8mm Acme Threaded Rod -4pcs
Asin: B09MW76BXL | Ean: 0755738197255 | UPC: 755738197255
8Mm Lead T8 Lead Screw Is With 4 Starts..
Special Anti-Backlash Nut, High-Precision, Low-Cost Diy Engraving Machine, The First Choice For Printers..
The Anti Backlash Nut Are Compatible With Creality Cr10 Cr-10S Ender-3 Ender 3S Ender3 Pro And Other 3D Printer..
Features
- Lead Screw Diameter: 8mm, Pitch: 2mm, Lead of thread: 8mm; two small M3 holes centre distance is 18mm.
- The anti backlash nut are compatible with Creality CR10 CR-10S Ender-3 Ender 3S Ender3 Pro and other 3D printer.
- 8mm lead T8 lead screw is with 4 starts.
- Special anti-backlash nut, high-precision, low-cost DIY engraving machine, the first choice for printers.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #14
3DMAN MK7/MK8 Extruder Gear 36 Teeth Bore 5mm Stainless Steel Drive Gear for 3D Printers- 10pcs
Asin: B07N6F8KHT | Ean: 0659499232777 | UPC: 659499232777
Replace Your Broken One And Make Your Printer Work More Efficiently, Improve The Performance And Reliability For Your 3D Printers..
Widely Used In 3D Printer, Cnc, Milling Machine, Gear Forming Machine, Drilling Machine, Cnc Machine Tool Lathe, Hobbing Machine Or Other Mechanical Transmission Occasions..
Made Of Quality Stainless Steel, Rustproof And No Corrosion, Durable And Stable To Use, With Good Bearing Capacity, Allow For Improving Your Printers' Work Efficiency..
Size : 11 X 11 Mm/ 0.43 X 0.43 Inch (L X W), Its Inner Diameter Is 5 Mm/ 0.2 Inch, 36 Teeth, Fit For Most 3D Printers..
Features
- Package : 10 PCS extruder gears, sufficient quantity to satisfy your various demands and replacements.
- Size : 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is 5 mm/ 0.2 inch, 36 teeth, fit for most 3D printers.
- Replace your broken one and make your printer work more efficiently, improve the performance and reliability for your 3D printers.
- Made of quality stainless steel, rustproof and no corrosion, durable and stable to use, with good bearing capacity, allow for improving your printers' work efficiency.
- Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #15
3Dman 4PCS 40mm Hand Twist Leveling Nut + 4PCS Hot Bed Spring Compression+ 4PCS M4X40mm Screws for 3D Printers 4 Set
Asin: B0852PDFG1
High Quality Plastic Material, Durable And Resistant. Making Your Leveling Process Much Easier, Which Is Really A Great Way To Upgrade Your 3D Printer With A Little Prices..
Easy To Install: High Quality Leveling Knob Kit Can Make The Printer Much More Stable And Makes Hot Bed Becomes Much Steadiness When Printing..
Includes 4* Upgrade Leveling Nuts, 4* Mold Springs, And 4* Screws. This Saves You The Time And Effort Of Buying Accessories Separately..
The Torque Of The Hand Twisted Nut Is Large, Making It Easier To Fine Tune The Hot Bed. And Our Knobs Are Made Of Abs Material, Make The Leveling Is Safer And Does Not Hurt The Hand..
Features
- Upgraded Hand Twist Levelling Nut for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers.
- The torque of the hand twisted nut is large, making it easier to fine tune the hot bed. And our knobs are made of ABS material, make the leveling is safer and does not hurt the hand.
- High quality Plastic material, durable and resistant. Making your leveling process much easier, which is really a great way to upgrade your 3D printer with a little prices.
- Includes 4* upgrade leveling nuts, 4* mold springs, and 4* screws. This saves you the time and effort of buying accessories separately.
- Easy to install: High quality leveling knob kit can make the printer much more stable and makes hot bed becomes much steadiness when printing.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #16
3DMAN 35pcs MK10 Nozzles 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Extruder Brass Print Head + 7pcs Cleaning Needles for 1.75 mm Filament 3D Printer
Asin: B0BTNNB18M
Note: After Replacing The Nozzle, Please Recalibrate The Distance Between Nozzle And Build Plate To Ensure The Quality Of Print Parts.
Material: Premium Brass, Sturdy And High Temperature Resistance, Smooth Silk, Connect With M7 Out Thread, Easy To Use.
Out Thread: M7, Filament Diameter: 1. 75Mm, Output Diameter: 0. 2Mm, 0. 3Mm, 0. 4Mm, 0. 5Mm, 0. 6Mm, 0. 8Mm, 1. 0Mm.
Compatibility: Flashforge And Others Using The Mk10 Nozzle.
Features
- Package include: 35pcs MK10 extruder nozzles, 7 Sizes: 5 x 0. 2mm, 5 x 0. 3mm, 5 x 0. 4mm, 5 x 0. 5mm, 5 x 0. 6mm, 5 x 0. 8mm, 5 x 1. 0mm. 7 x Cleaning Needles: 0. 2mm, 0. 3mm, 0. 4mm, 0. 5mm, 0.6mm, 0.8mm, 1.0mm
- Compatibility: flashforge and others using the MK10 nozzle
- Note: after replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts
- Out thread: M7, filament diameter: 1. 75mm, output diameter: 0. 2mm, 0. 3mm, 0. 4mm, 0. 5mm, 0. 6mm, 0. 8mm, 1. 0mm
- Material: Premium brass, sturdy and high temperature resistance, Smooth silk, connect with M7 out thread, Easy to use
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #17
3Dman V Gantry Plate 3D Printer Parts with Mini V-Wheels for 2020 V-Type Aluminum Profile
Asin: B08PBX85C1 | Ean: 0791738580208 | UPC: 791738580208
Small V-Wheel With Plate For 2020 Aluminum Profile For Cnc And 3D Printer Parts Kossel Black Wheel.
For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, Cr10 Series, Vyper Series And Other 3D Printers..
Plate-L*W*H: 50Mm*50Mm*6Mm, Small V-Wheel Diameter:15.5Mm.
Easy To Assemble And Disassemble..
Features
- Material: Aluminum Alloy.
- Easy to assemble and disassemble.
- Small V-Wheel with Plate for 2020 Aluminum Profile for CNC and 3D Printer Parts Kossel Black Wheel
- Plate-L*W*H: 50mm*50mm*6mm, Small V-Wheel diameter:15.5mm
- for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Vyper Series and Other 3D printers.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #18
3Dman POM Small Plastic Pulley Passive Round Wheel with Bearing Idler for 3D Printers, 10 PCS
Asin: B07V4GHLL8
【Smooth And Precise】T Hese Smooth And Precise Pom Wheels Move Smoothly, Solve Wobble Problem, Have Low Noise And High Printing Accuracy, And Can Greatly Increase The Printing Speed, Which Are Useful 3D Printer Accessories..
Widely Used In 3D Printer, Cnc, Milling Machine, Gear Forming Machine, Drilling Machine, Cnc Machine Tool Lathe, Hobbing Machine Or Other Mechanical Transmission Occasions..
【Note】Please Be Aware There's A Movable Copper Ring Between Bearings. It's Normal If The Ring Moves, Otherwise Bearing Can't Rotate. It's Not Quality Issue..
【High Quality Material】3Dman Pom Pulley Wheels Are Made Of High Quality Pom Material, Which Has Excellent Abrasion Performance, Flame Retardancy And Anti-Oxidation, Also Strong Material With Outstanding Wear Ratios..
Features
- Outer Diameter: 15.3mm. Bore: 5mm. Height: 8.9mm
- High Quality Material 3DMAN POM pulley wheels are made of high quality POM material, which has excellent abrasion performance, flame retardancy and anti-oxidation, Also strong material with outstanding wear ratios.
- Smooth and Precise T hese smooth and precise POM wheels move smoothly, solve wobble problem, have low noise and high printing accuracy, and can greatly increase the printing speed, which are useful 3D printer accessories.
- NOTE Please be aware there's a movable copper ring between bearings. It's normal if the ring moves, otherwise bearing can't rotate. It's not quality issue.
- Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #19
3DMAN T8 Anti-Backlash Spring Loaded Nuts Elimination Gap Nut Z-axis for 3D Printer Ender3 CR10 Series and Tornado CNC Machine 8mm Acme Threaded Rod Lead Screws (2pcs)
Asin: B09MLYYP4Q | Ean: 0755738197224 | UPC: 755738197224
8Mm Lead T8 Lead Screw Is With 4 Starts..
Special Anti-Backlash Nut, High-Precision, Low-Cost Diy Engraving Machine, The First Choice For Printers..
The Anti Backlash Nut Are Compatible With Creality Cr10 Cr-10S Ender-3 Ender 3S Ender3 Pro And Other 3D Printer..
Features
- Lead Screw Diameter: 8mm, Pitch: 2mm, Lead of thread: 8mm; two small M3 holes centre distance is 18mm.
- The anti backlash nut are compatible with Creality CR10 CR-10S Ender-3 Ender 3S Ender3 Pro and other 3D printer.
- 8mm lead T8 lead screw is with 4 starts.
- Special anti-backlash nut, high-precision, low-cost DIY engraving machine, the first choice for printers.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
Dimensions: 0.39 x 1.97 x 1.18 Inches | Weight: 0.03 Pounds
See On Amazon #20
3Dman V Gantry Plate Set V-Wheel for 2020 V-Type Aluminum Profile Wheels for 3D Printers and CNC
Asin: B08NDMVM42 | Ean: 0191762772042 | UPC: 191762772042
Type: Wheel Kit/Wheel.
Plate Size: 2.56"*2.56"*0.12"/65Mm*65Mm*3Mm(L X W X H); Pulley Dia: 0.95"/ 24Mm; Pulley Height: 0.43"/11Mm..
Apply To: 2020 V Gantry Plate Aluminum Profile..
Widely Used In Milling Machine, Gear Shaper, Drilling Machine, Cnc Engine Lathe, Hobbing Machine Or Other Machinery Transmission Occasions..
Features
- Material: Aluminum Alloy
- Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
- Type: Wheel Kit/Wheel
- Apply to: 2020 V Gantry Plate aluminum profile.
- Plate Size: 2.56*2.56*0.12/65mm*65mm*3mm(L x W x H); Pulley Dia: 0.95/ 24mm; Pulley Height: 0.43/11mm.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #21
3Dman GT2 40Teeth Bore 8mm Timing Pulley Synchronous Wheel Aluminum for Width 6mm 3D Printers - 4pcs
Asin: B09P6F1LHC | Ean: 0755738197569 | UPC: 755738197569
Material: Made Of High Quality Aluminium Alloy, Durable, Fine Workmanship And High Transmission Accuracy Suits To The Timing Belt Which Is 6Mm Width..
Widely Used In Milling Machine, Gear Shaper, Drilling Machine, Cnc Engine Lathe, Hobbing Machine Or Other Machinery Transmission Occasions..
Contact With The Tooth Side Which Minimizes The Risk Of The Belt Slipping..
Features
- Product Name: 40 Teeth GT2 Timing Pulley Bore 8mm
- Contact with the tooth side which minimizes the risk of the belt slipping.
- Material: Made of high quality Aluminium alloy, durable, fine workmanship and high transmission accuracy Suits to the timing belt which is 6mm width.
- Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #22
3Dman Dual Gear Extruder Drive Feeder for Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers
Asin: B086WBBHQ3 | Ean: 0191762771731 | UPC: 191762771731
This Idler Gear Is Upgraded With The Washer Protect, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Note : Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use; For 3D Printers With Filament Detector, As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height; For Vyper Users, Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse..
Note: Compatible With Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, Cr10 Series And Other 3D Printers. Only Suit For 3D Printers With Motor Shaft Over 20Mm, Please Measure The Shaft Length Before Placing The Order..
The Extrusion Spring Tension Could Be Adjusted By Tighten The Screw, Which Greatly Improves The Printing Accuracy And Feeding Issue..
Features
- Double Gear Extrusion : The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- The extrusion spring tension could be adjusted by tighten the screw, which greatly improves the printing accuracy and feeding issue.
- This idler gear is upgraded with the washer protect, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- NOTE: Compatible with Ender 3 V2, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D printers. ONLY suit for 3d printers with motor shaft over 20mm, please measure the shaft length before placing the order.
- NOTE : Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use; for 3d printers with filament detector, as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height; for Vyper users, please swap the motor wire sequence to make it turn forward instead of reverse.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #23
3DMAN V5 3D Printer Hotend for Chiron, Print Head 24V/40W Ceramic Heating Cartridge
Asin: B0BL3XLZYT
No Leaking &Clogging: Heat-Resistant With Aluminum Heating Block, The Temperature Can Reach Up To 250℃, Equipped With Ntc 3950 Thermistors And 24V 40W Cartridge Heater. Without Leaking And Blocking To Solve Your Print Trouble..
Note: Before Using Please Check All Parts Are Tightened, Because It Will Become Loose During Transportation..
Plug And Play: Both Of The Thermistor And Heating Rod Come With Connector, Very Easy To Install..
Well Heat Dissipation: Different With Other Hotend, Our Chiron Hotend Has A Good Dissipation Performance To Keep Print Well..
Features
- Assembled Chiron hotend: Pneumatic Fitting, Heat Sink, Throat Pipe, Heated Block, Heated Block Cover, Heated Tube and Thermistor.
- Well Heat Dissipation: Different with other hotend, our chiron hotend has a good dissipation performance to keep print well.
- No Leaking &Clogging: Heat-resistant with aluminum heating block, the temperature can reach up to 250 , equipped with NTC 3950 thermistors and 24V 40W cartridge heater. Without leaking and blocking to solve your print trouble.
- Plug and Play: Both of the thermistor and heating rod come with connector, very easy to install.
- NOTE: Before using please check all parts are tightened, because it will become loose during transportation.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #24
3DMAN Dual Gear Extruder + Nema17 42-40 Stepper Motor, 2 Phases 1A 1.8 Degree 0.4 N.M with 1M Connecting Cable for Ender 3 Series and CR 10 Series and Other 3D Printers
Asin: B0BHWL12HW | Ean: 0752895989860 | UPC: 752895989860
Size: 42Mm X 42Mm X 40Mm, 2 Phase 4 Wires, With 39.37 Inches/ 1 Meter Connecting Cable, Provides 1A 1.8 Degree 0.4 N.M/57G.Cm^2 In Holding Torque Which Helps To Improve The Motor's Stability..
Note : Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use; For 3D Printers With Filament Detector, As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height; For Vyper Users, Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse..
Compatible: The 42-40 Stepper Motor Applies For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, Cr10 Series, Vyper Series And Other 3D Printers. With The Stepper Motor, You Will Find It Easy To Solve The Problems Of Uneven Extrusion, Regularly Plugging And Material Reloading..
The Extrusion Spring Tension Could Be Adjusted By Tightening The Screw, Which Greatly Improves The Printing Accuracy And Feeding Issue. This Idler Gear Is Upgraded, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Features
- Double Gear Extrusion : The filament is gripped by the dual drive, much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- The extrusion spring tension could be adjusted by tightening the screw, which greatly improves the printing accuracy and feeding issue. This idler gear is upgraded, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Size: 42mm X 42mm X 40mm, 2 Phase 4 Wires, with 39.37 inches/ 1 Meter connecting cable, provides 1A 1.8 Degree 0.4 N.M/57g.cm^2 in holding torque which helps to improve the motor's stability.
- Compatible: The 42-40 stepper motor applies for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Vyper Series and Other 3D printers. With the stepper motor, you will find it easy to solve the problems of uneven extrusion, regularly plugging and material reloading.
- NOTE : Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use; for 3d printers with filament detector, as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height; for Vyper users, please swap the motor wire sequence to make it turn forward instead of reverse.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3Dman
See On Amazon #25
CR-10S Pro 0.4mm Hotend Nozzles (20 Pieces) by 3DMAN - National Brass, High Heat Conductivity, High Hardness
Asin: B0BL76MWGV
Just Fit For Cr-10S Pro 3D Printer..
Features: National Brass Copper Material, With High Heat Conductivity, High Hardness, The Inner Wall Are Smooth And Burr-Free, The Feeding Output Is Even..
M6 X 0.75Mm Threads..
Features
- Diameter: 0.4mm. Size: 13 X 8 mm.
- M6 x 0.75mm Threads.
- Just Fit for CR-10S Pro 3D Printer.
- Features: National brass copper material, with high heat conductivity, high hardness, the inner wall are smooth and burr-free, the feeding output is even.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #26
3DMAN Stainless Steel Funnel, Resin Filter Cup for SLA/DLP/LCD Resin 3D Printer UV Resin, Double Strainer Filter for 3D Printing Liquid - 2 Pieces
Asin: B0BL6R99TS
【Easy To Clean】Stainless Steel Funnel Is Easier To Clean Than Other Materials. After Filtering, Wipe With A Paper Towel, Then Wash With Isopropyl Alcohol/Alcohol/Soap Water With A Cleaning Brush. Warning: Wear Gloves During Filtration And Cleaning To Avoid Direct Skin Contact With Resin..
The Stainless Steel Filter Is Not Only For Filtering The Resin Of The Printers, But For Any Non-Aggressive Technical Product..
Fits All Resin Bottles With Bottle Neck Width In 15 Mm, Compatible With Most Bottles, Jars And Other Containers. The Resin Funnel Specially Designed Dented Stem Allows The Air Outflow In Order To Fill Liquids Faster..
Funnel And Filter Are Made Of 100% Food Grade Durable 304 Stainless Steel, The Funnel Is Strong And Corrosion Resistant, And The Filter Is Clean And Tight For Better Filtration. Safer And More Durable Than Paper And Silicone Funnels..
Features
- Resin filter can effectively filter the agglomeration and pollutants in the printing resin liquid, and recover the SLA/DLP/LCD photosensitive resin into the resin bottle for the next printing use.
- Funnel and filter are made of 100% food grade durable 304 Stainless Steel, the funnel is strong and corrosion resistant, and the filter is clean and tight for better filtration. Safer and more durable than paper and silicone funnels.
- Easy to Clean Stainless steel funnel is easier to clean than other materials. After filtering, wipe with a paper towel, then wash with isopropyl alcohol/alcohol/soap water with a cleaning brush. WARNING: Wear gloves during filtration and cleaning to avoid direct skin contact with resin.
- Fits all resin bottles with bottle neck width in 15 mm, compatible with most bottles, jars and other containers. The resin funnel specially designed dented stem allows the air outflow in order to fill liquids faster.
- The stainless steel filter is not only for filtering the resin of the printers, but for any non-aggressive technical product.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon