A ACT ACCU-CUT - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from A ACT ACCU-CUT on Amazon
- ACCUCUT I4KES 1/8 Carbide Square End Mill- 4 Flute Milling Bit Set for Steel, Forge Steel, Hardened...
- ACCUCUT I2KES 2 Flute 3/8 Carbide Square End Mill - Milling Bit Set for Aluminum, Steel, Copper, Pl...
- ACCUCUT I1AES 3/16 O Flute Carbide End Mill, Single Flute CNC Router Milling Bit Set for Aluminum, ...
- ACCUCUT A4KES 3mm Carbide Square End Mill- 4 Flute Milling Bit Set for Steel, Forge Steel, Hardened ...
- ACCUCUT Chamfer End Mill - 90 Degree, V Groove, 3/8 Carving Bits for Alloy Steel, Aluminum, Wood - ...
- ACCUCUT I3KER 3/8 Carbide Roughing Square End Mill - 3 Flute Milling Bit for Steel, Forge Steel, Ha...
- ACCU-Cut 1/8 - 3/8 Square Carbide End Mill Set (5 pcs)
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ACCUCUT I4KES 1/8 Carbide Square End Mill- 4 Flute Milling Bit Set for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50 - AlTiN Coating CNC Router Bit, 45 Degree Helix (5 pcs)
Asin: B09HRR4SQV | Ean: 4711232489100
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
4 Flute Cutter: It Has Uniqe Geometry And Strong Cutting Edge. 4 Flute Is Great For Speedy Cutting. Ideal For Planar, Step, Groove, Forming Surface While The 45 Degree Helix Design Can Perform Smooth Surface Finish, Better Chip Removal Control Than Those With Lower Helix Degree..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- Solide Carbide: The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- 4 Flute Cutter: It has uniqe geometry and strong cutting edge. 4 flute is great for speedy cutting. Ideal for planar, step, groove, forming surface while the 45 degree helix design can perform smooth surface finish, better chip removal control than those with lower helix degree.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: A ACT ACCU-CUT
Dimensions: 2.17 x 2.70 x 0.55 Inches
See On Amazon #2
ACCUCUT I2KES 2 Flute 3/8 Carbide Square End Mill - Milling Bit Set for Aluminum, Steel, Copper, Plastic & Alloys - 35 Degree Helix, AlTiN Coating CNC Router Bit
Asin: B09VRZ22VJ | Model: I2KES | PartNumber: I2KES | Ean: 4711232489223
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
35 Degree Helix: 2 Flute Square Endmill, 3/8" Diameter, 15/16" Cutting Length, 3" Overall Length, 3/8" Shank..
Large Flute Gullet: 2 Flute End Mills Have A Larger Gullet So There's More Chip Clearance. It Is Suitable For Cutting Softer Materials Such As Aluminum And Non-Ferrous Alloys. Therefore, A Tool’S Strength Is Less Of A Concern. A Tool Can Be Fed Faster, And Larger Material Removal Rate Is Facilitated By The Large Flute Valleys Of 2 Flute Tools. 2 Flute End Mills Are Recommended To Be Used At A Slower Speed When Working With Steel..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. The Carbide Rod We Select Is Made With The Finest Tungsten Carbide Powder And Cobalt, Using The Best Ratio To Achieve The Most Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 30.
- Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we select is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- Large Flute Gullet: 2 flute end mills have a larger gullet so there's more chip clearance. It is suitable for cutting softer materials such as aluminum and non-ferrous alloys. Therefore, a tool s strength is less of a concern. A tool can be fed faster, and larger material removal rate is facilitated by the large flute valleys of 2 flute tools. 2 flute end mills are recommended to be used at a slower speed when working with steel.
- 35 degree Helix: 2 Flute Square Endmill, 3/8 Diameter, 15/16 Cutting Length, 3 Overall Length, 3/8 Shank.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: A ACT ACCU-CUT
See On Amazon #3
ACCUCUT I1AES 3/16 O Flute Carbide End Mill, Single Flute CNC Router Milling Bit Set for Aluminum, Wood, Copper, Alloys, Non-Ferrous, Plastic and Soft Materials (2 pcs)
Asin: B0BM8LWTRN | Model: I1AES | PartNumber: I1AES | Ean: 4711232489278
High Rake & Lower Helix Design: High Relief Design Produces Sharper Edge For Improved Shearing Action While Transferring Heat Into The Chip, Lower Helix Reduces Lifting Forces, Making Design Preferable For Fiber-Reinforced Applications And Vacuum Table Setups..
Upcut End Mill: Right Hand Spiral, Right Hand Cut Can Minimize Upward Forces. The Bottom Surface Of The Workpiece Will Be Cleanly Cut With As Little Chips As Possible..
Single Flute And Sharp Edge: 1 Flute Is For Faster Rates Compared To Conventional Multi-Flute Tools. The Unique Single Cutting Edge Design Creates More Space For Chip Evacuation, Allowing Faster Feed Rates And Higher Chip Loads, Designd For Improved Shearing Action While Transferring Heat Into The Chip..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. The Carbide Rod We Select Is Made With The Finest Tungsten Carbide Powder And Cobalt, Using The Best Ratio To Achieve The Most Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- Application: perfect for aluminum, brass, plastics, exotic composites, wood, and any soft metals. Please note that they are not recommended for steel.
- Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we select is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- High Rake & Lower Helix Design: High relief design produces sharper edge for improved shearing action while transferring heat into the chip, lower helix reduces lifting forces, making design preferable for fiber-reinforced applications and vacuum table setups.
- Single Flute and Sharp Edge: 1 flute is for faster rates compared to conventional multi-flute tools. The unique single cutting edge design creates more space for chip evacuation, allowing faster feed rates and higher chip loads, designd for improved shearing action while transferring heat into the chip.
- Upcut End Mill: Right hand spiral, right hand cut can minimize upward forces. The bottom surface of the workpiece will be cleanly cut with as little chips as possible.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: A ACT ACCU-CUT
Dimensions: 0.55 x 2.68 x 0.43 Inches
See On Amazon #4
ACCUCUT Chamfer End Mill - 90 Degree, V Groove, 3/8 Carving Bits for Alloy Steel, Aluminum, Wood - I2DMS 2 Flute Carbide End Mill for Chamfering, Deburring, Spotting & Side Milling - AlTiN Coating
Asin: B09HRVR84V | Model: I2DMS | PartNumber: I2DMS | Ean: 4711232489193
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
35° Helix: 2 Flute And 35 Degree Helix Design Is Ideal For Roughing Application Because Of Its Greater Strength And Capability To Carry A Larger Chip Load..
Versatile Design: This End Mill Is Designed For Multiple Purposes, Such As Chamfering, Spotting, Deburring And Side Milling. The Chamfer Degree Is 45 Per Side..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. The Carbide Rod We Choose Is Made With The Finest Tungsten Carbide Powder And Cobalt, Using The Best Ratio To Achieve The Most Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40.
- Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side.
- 35 Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its greater strength and capability to carry a larger chip load.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: ACCUCUT
Dimensions: 1.80 x 3.90 x 2.30 Inches
See On Amazon #5
ACCUCUT I3KER 3/8 Carbide Roughing Square End Mill - 3 Flute Milling Bit for Steel, Forge Steel, Hardened Steel, Copper, Alloys & Materials < HRC 50-35 Degree Helix, AlTiN Coating CNC Router Bit
Asin: B09HQT97M2 | Model: I3KER | PartNumber: I3KER | Ean: 4711232489179
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
3 Flute With 35 Helix: 35 Degree Helix Has A Higher Tool Strength. 3 Flutes Feature A Large Core That's Great For Roughing Out A Lot Of Meterials. If The Finishing Surface Is A Concern, Then Be Sure To Come In With A Finishing Tool After The Roughing Operation. It Is Recommended To Use 4 Flute, 45 Degree Helix End Mills For Finishing..
Medium Pitch Design: Allows The Chips To Be Cut Down To Much Finer Sizes For Smoother Machining And A More Efficient Metal Removal Process, Which Allows More Chips Into The Flutes During The Evacuation Process Without Any Packing Occurring. This Results In Lower Cutting Pressures At A Given Radial Depth Of Cut..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. The Carbide Rod We Select Is Made With The Finest Tungsten Carbide Powder And Cobalt, Using The Best Ratio To Achieve The Most Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we select is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- Medium Pitch Design: allows the chips to be cut down to much finer sizes for smoother machining and a more efficient metal removal process, which allows more chips into the flutes during the evacuation process without any packing occurring. This results in lower cutting pressures at a given radial depth of cut.
- 3 Flute with 35 Helix: 35 degree helix has a higher tool strength. 3 flutes feature a large core that's great for roughing out a lot of meterials. If the finishing surface is a concern, then be sure to come in with a finishing tool after the roughing operation. It is recommended to use 4 flute, 45 degree helix end mills for finishing.
- See more on Amazon...
Brand: A ACT ACCU-CUT | Manufacturer: A ACT ACCU-CUT
Dimensions: 0.70 x 3.90 x 0.90 Inches
See On Amazon #6
ACCU-Cut 1/8 - 3/8 Square Carbide End Mill Set (5 pcs)
Asin: B0CS684S8G
Altin Coating: It Is A Strong Coating That's Coated At Temperatures Between 450°C To 475°C. It Is Able To Provide High Wear Resistance, Lubricity, Exceptional Oxidation Resistance, Extreme Hardness, And Excellent Abrasive Wear Resistance. It Has Higher Reliability In Dry Operations, Heat Resistance, Hard Machining, And The Resistance Can Be Reduced..
4 Flute Cutter: It Has Uniqe Geometry And Strong Cutting Edge. 4 Flute Is Great For Speedy Cutting. Ideal For Planar, Step, Groove, Forming Surface While The 45 Degree Helix Design Can Perform Smooth Surface Finish, Better Chip Removal Control Than Those With Lower Helix Degree..
Solide Carbide: The Material Is European Origin Ultra Fine Grain Carbide. We Use The Highest Quality Tungsten Carbide Powders And Adjust The Ratio Of Tungsten Carbide And Cobalt To Meet The Ideal Hardness. It Is Stable And Has Excellent Wear-Resistance Of The Material. It Significantly Enhances The Tool's Lifespan And Keeps The End Mill Sharp. It Also Helps Keep The Surface Quality Of Your Work-Piece At The Best Level Possible..
Features
- General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
- Solide Carbide: The material is European origin ultra fine grain carbide. We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450 C to 475 C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced.
- 4 Flute Cutter: It has uniqe geometry and strong cutting edge. 4 flute is great for speedy cutting. Ideal for planar, step, groove, forming surface while the 45 degree helix design can perform smooth surface finish, better chip removal control than those with lower helix degree.
- See more on Amazon...
Brand: A ACT ACCU-CUT
See On Amazon