ACEPLANET - Buying Guide
Last Updated: 05/07/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ACEPLANET Offset Position Keyed Sliding Patio Door Handleset with Mortise Lock, 45 Keyway, 3-15/16" H.C., Fits 1-3/8" to 2" Thick Doors, Non-Handed, White Diecast
Asin: B0CQC1YTDB
Just Unscrew On The Back Side Of Inside Or Outside Pulls, Which Allows You To Flip The Handles For Both Left And Right-Handed Opening Doors..
Package Includes A Mortise Lock And Key Cylinder, A Match Of I/E Pull Handles And Mounting Hardware. No Keeper Included, Please Be Aware Before Purchasing..
Zinc Diecast With A White Finish Blends Nicely With Both Contemporary And Traditional Styling Of Your White Doors, Thus It Remains Very Popular Among Homeowners..
Look On The Back Of The Inside Handle Where The Thumb Lever Passes Through. If Lower Latch Slot Is Where Your Thumb Lever Passes Through, You Have An Offset Position. This Is Exactly What You're Looking For. Please Check Before Purchase..
Features
- This offset mount sliding glass door handleset with 3-15/16" hole spacing is commonly used to replace mortise lock and pull handles for Pella, Guardian, PGT, PPG, Herculite and others wood or vinyl sliding patio doors.
- Look on the back of the inside handle where the thumb lever passes through. If lower latch slot is where your thumb lever passes through, you have an offset position. This is exactly what you're looking for. Please check before purchase.
- Just unscrew on the back side of inside or outside pulls, which allows you to flip the handles for both left and right-handed opening doors.
- Zinc diecast with a white finish blends nicely with both contemporary and traditional styling of your white doors, thus it remains very popular among homeowners.
- Package Includes a mortise lock and key cylinder, a match of I/E pull handles and mounting hardware. No keeper included, please be aware before purchasing.
- See more on Amazon...
First Available: 03/31/2024
Brand: ACEPLANET | Manufacturer: ACEPLANET
Dimensions: 4.30 x 9.20 x 4.30 inches
See On Amazon #2
Combo Sliding Screen Door Upper + Lower Roller Assembly Fits Andersen Part #1997063 & #1997310 (1991 to P), 1-1/4" Nylon Concaved, Edge Adjustable, 2 Pairs
Asin: B0CHFW2XJ5
Edge Adjustment Arm Allows For Easy And Quick Adjustments With A Flat Head Screwdriver..
2 Pairs Of Lower + Upper Screen Rollers Included, We Recommend Replacing Both Rollers At The Same Time..
No Tools Required To Install, The Roller Housing Has Two Tabs That Lock Under The Frame To Hold In Place..
Compatible With Gliding Insect Screens Manufactured From 1991 To Present. Works With Upper Screen Rollers Part #1997063 And Lower Screen Rollers Part #1997310..
Features
- Commonly used to replace gliding patio door insect screen rollers assembly for Andersen 200 Series Perma-Shield Gliding, 200 Series Narroline Gliding, 400 Series Frenchwood Hinged, 400 Series Frenchwood Gliding and A-Series Gliding Patio Doors.
- Compatible with gliding insect screens manufactured from 1991 to present. Works with upper screen rollers part #1997063 and lower screen rollers part #1997310.
- Edge adjustment arm allows for easy and quick adjustments with a flat head screwdriver.
- No tools required to install, the roller housing has two tabs that lock under the frame to hold in place.
- 2 pairs of lower + upper screen rollers included, we recommend replacing both rollers at the same time.
- See more on Amazon...
Brand: ACEPLANET | Manufacturer: ACEPLANET
See On Amazon #3
ACEPLANET 5" Backset Entry Door Latch with Standard Keyed Knobset, 19/64" (7.6mm) Square Interface with Square Corner Faceplate, Non-Handed, Satin Nickel
Asin: B0CFDL2VG8
Standard Door Preparation: Requires A Dia. 2-1/8" Cross Bore Hole On The Face Of The Door And A Dia. 1" Edge Bore Hole On The Edge Of The Door. Depending On Door And Handleset, You May Have To Do Some Modification Of The Door To Make It Fit..
Before Purchase: Finished To Match Standard Satin Nickel Knobset And 90° Leverset, If You Want To Have It Work With Lever Handles, Please Make Sure The Lever Must Be 90° Rotatable Instead Of 45° On The Most Of Market, Or Else The Latch Tab May Not Fully Retractable..
Saves Your Mid-Century Front Doors: Ancient Mid-Century Handleset And Deadbolt Mostly Have Been Old Or Damaged, It Would've Cost Thousands Of Dollars To Replace The Door. Now With These 5" Backset Latches, You Can Keep Your Antique Door And Even Make It Possible To Update With Modern Styles Of Handleset..
7.6Mm Square Opening: If You Are Looking For A 5" Backset Entry Latch, You'll Amazingly Find Ours With A 19/64" Square Opening Instead Of A Half-Moon Hole Like Others, Which Means It Will Accept The Square Interface Of Most Knobset And 90° Leverset Manufacturers..
Features
- 5-inch Backset Hardware: Back in the 1950s and 1960s, 5" backset door hardware was pretty common, but today, almost everything uses the standard 2-3/8" or 2-3/4" backset. If you've been driving yourself crazy trying to find a latch with a 5" backset, you've come to the right place!
- 7.6mm Square Opening: If you are looking for a 5 backset entry latch, you'll amazingly find ours with a 19/64 square opening instead of a half-moon hole like others, which means it will accept the square interface of most knobset and 90 leverset manufacturers.
- Standard Door Preparation: Requires a dia. 2-1/8 cross bore hole on the face of the door and a dia. 1 edge bore hole on the edge of the door. Depending on door and handleset, you may have to do some modification of the door to make it fit.
- Saves Your Mid-Century Front Doors: Ancient mid-century handleset and deadbolt mostly have been old or damaged, it would've cost thousands of dollars to replace the door. Now with these 5 backset latches, you can keep your antique door and even make it possible to update with modern styles of handleset.
- Before Purchase: Finished to match standard satin nickel knobset and 90 leverset, if you want to have it work with lever handles, please make sure the lever must be 90 rotatable instead of 45 on the most of market, or else the latch tab may not fully retractable.
- See more on Amazon...
Brand: ACEPLANET | Manufacturer: ACEPLANET
Dimensions: 3.00 x 7.08 x 3.00 inches | Weight: 1.30 pounds
See On Amazon #4
2 Pack Bi-Direction Pocket Door Soft Close/Open Hanger Fits Johnson Part #1062 Replacement Kit, 1" Nylon Ball Bearing, 1-1/4" C.T.C, Min. 1" Thick Doors, 165lbs Capacity
Asin: B0CH4J15QS
Replaces #1062 Soft Close Open Kit: Includes 2 Actuator Arms, 2 Soft Close Assemblies, 2 Hanger Plates, 2 Wrenches And 1 Screw Pack. Perfect Replacement Part Set For 1500/1560/1562/2710 Series Pocket Door Frames..
Compatible With: 100, 134F, 138F, 2610F Series Track. These Adjustable Soft Close Assemblies Mount On The Tops Of Pocket Doors And Has A 1-1/4-Inch Center To Center..
Commercial Grade (1-Inch Roller) With Max. 165Lbs Weight Capacity, Not Universal For Most Residential Use (3/4-Inch Roller)..
For Bi-Direction Soft Close/Open Operation, The #1060 Must Work As A Pair..
Features
- Each single hanger is equiped with three 1-inch O.D. flat nylon encapsulated ball bearing wheels. Not fit standard track, please check before purchase.
- For bi-direction soft close/open operation, the #1060 must work as a pair.
- Replaces #1062 Soft Close Open Kit: Includes 2 actuator arms, 2 soft close assemblies, 2 hanger plates, 2 wrenches and 1 screw pack. Perfect replacement part set for 1500/1560/1562/2710 Series pocket door frames.
- Commercial grade (1-inch roller) with max. 165lbs weight capacity, not universal for most residential use (3/4-inch roller).
- Compatible With: 100, 134F, 138F, 2610F Series Track. These adjustable soft close assemblies mount on the tops of pocket doors and has a 1-1/4-inch center to center.
- See more on Amazon...
Brand: ACEPLANET | Manufacturer: ACEPLANET
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #5
Concaved Mirror Door Bottom Roller Assembly Fits Contractors Part #W8020, 1-1/2" Nylon Ball Bearing, 2-5/16" - 2-1/2" Vertical H.C., Top Adjustable, 2 Pack
Asin: B0CKN27FLJ | Model: APCKMirror2PK | PartNumber: APCKMirror2PK
The 1-1/2" Nylon Ball Bearing Wheel Is Constructed Of Durable Plastic Which Provides For A Smooth, Long-Lasting, Quiet Roll And It Features A Narrow Concave Edge..
Includes 2 Pack Rollers, We Recommend Replacing Both Rollers At The Same Time. Bolts Not Included, Please Reuse The Existing Ones..
It's Adjustable Once Installed On The Bottom Of Mirror Doors, The Top Adjustment Screw Allows For Quick And Easy Adjustments With A Cross Head Screwdriver..
The Housing Has 2-5/16 - 2-1/2 Inch Vertical Mounting Hole Centers. Its Body Measures 1-3/4 Inch Wide And 7/16 Inch Deep. For Further Dimensional Information, Please See The Line Drawing..
Features
- Most commonly used to repair wood or metal framed sliding bypass mirror doors manufactured by Contractors, Charmac, Monarch and others.
- The housing has 2-5/16 - 2-1/2 inch vertical mounting hole centers. Its body measures 1-3/4 inch wide and 7/16 inch deep. For further dimensional information, please see the line drawing.
- The 1-1/2 nylon ball bearing wheel is constructed of durable plastic which provides for a smooth, long-lasting, quiet roll and it features a narrow concave edge.
- It's adjustable once installed on the bottom of mirror doors, the top adjustment screw allows for quick and easy adjustments with a cross head screwdriver.
- Includes 2 pack rollers, we recommend replacing both rollers at the same time. Bolts NOT included, please reuse the existing ones.
- See more on Amazon...
Brand: ACEPLANET | Manufacturer: ACEPLANET
See On Amazon #6
7/8" Bypass Closet Door Ball Bearing Hangers Fit Acme/Cox/Atlas/Stanley/National Double-J Tracks, Front 1/4" & Back 1/2" Offset Side Mount, 2 Pairs
Asin: B0CGVGJVRG
Compatible With 3/4-In, 7/8-In, 1-1/8-In Or 1-1/4-In Thick Doors With Double-J Tracks For The Installation Of A 2-Door Panel System..
Package Includes 2 Pair Of Top Hangers, 2 Finger Pulls, 1 Adjustable Floor Guide, 1 Door Stop And 1 Screw Pack. Perfect Replacement Part Set For Sliding Bypass Doors..
Use The 1/4-Inch Offset Roller Assembly For The Front Door And The 1/2-Inch Offset Roller Assembly For The Back Door. Housings Feature Slotted Holes For Maximum Adjustment..
Fits For Acme, Cox, Atlas, Stanley And Others Standard Double-J Tracks, Please Check Before Purchase. This Kit Will Safely Hold Doors That Weigh Up To 75-Pounds Each..
Features
- Upgraded 7/8 in. ball bearing hangers are now available for you, we insist replacing with nylon encapsulated ball bearing wheels because nylon standard wheel door hangers have been easily worn out all the time.
- Fits for Acme, Cox, Atlas, Stanley and others standard double-J tracks, please check before purchase. This kit will safely hold doors that weigh up to 75-pounds each.
- Compatible with 3/4-in, 7/8-in, 1-1/8-in or 1-1/4-in thick doors with double-J tracks for the installation of a 2-door panel system.
- Use the 1/4-inch offset roller assembly for the front door and the 1/2-inch offset roller assembly for the back door. Housings feature slotted holes for maximum adjustment.
- Package includes 2 pair of top hangers, 2 finger pulls, 1 adjustable floor guide, 1 door stop and 1 screw pack. Perfect replacement part set for sliding bypass doors.
- See more on Amazon...
Brand: ACEPLANET | Manufacturer: ACEPLANET
See On Amazon