AKZYTUE - Buying Guide
Last Updated: 05/07/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
8-24W LED Driver 300mA Constant Current High Power AC 100-265V Output 24-36V DC Connector External Power Supply LED Ceiling Lamp Rectifier Transformer, Small Electric Panel
Asin: B0C6MFKX4Y | Model: YDL025 | PartNumber: YDL025
Advantage: Led Driver With Ce Certification, Durable Use. With High Power, Low Heat, Good Efficiency, Over-Current Protection And Short-Circuit Protection..
Installation: Please Use It Under The Guidance Of Professional Electrician. Led Driver Is Easy To Install, Pay Attention To The Neutral Wire (Blue Wire) And Load Wire (Brown Wire) Of Led Products Installed Accordingly To Avoid Damage, And Keep The Wire Away From Water..
Applications: These Led Drivers Are Suitable For Led Bulbs And Also For Most Led Strips, Such As Led Mirror Front Light, Spot Light, Led Cabinet Light, Led Kitchen Light..
Specifications: Power: 8~24W; Input Voltage: Ac100-265V; Output Voltage: Dc24-36V; Current: 280Ma; Size: Size: 88*38*24Mm/3.46*1.5*0.94 Inches (L×W×H)..
Features
- Purchase Note: Please make sure that the maximum wattage of the strip light does not exceed the maximum output power of the LED driver.
- Specifications: Power: 8~24W; Input voltage: AC100-265V; Output voltage: DC24-36V; Current: 280mA; Size: Size: 88*38*24mm/3.46*1.5*0.94 inches (L W H).
- Advantage: LED driver with CE certification, durable use. With high power, low heat, good efficiency, over-current protection and short-circuit protection.
- Applications: These LED drivers are suitable for LED bulbs and also for most LED strips, such as LED mirror front light, spot light, LED cabinet light, LED kitchen light.
- Installation: Please use it under the guidance of professional electrician. LED driver is easy to install, pay attention to the neutral wire (blue wire) and load wire (brown wire) of LED products installed accordingly to avoid damage, and keep the wire away from water.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #2
AKZYTUE Magnetic Electric Motor Starter, 220V 5.5KW 7.5HP Magnetic Electric Motor Switch, 3 Phase or Single Phase Magnetic Switch Motor Starter for Air Compressor
Asin: B0CKBJPRB1
Easy To Use:The Magnetic Starter's Electrical Switch Box Is Controlled By A Color-Coded On/Off Button, Which Allows Direct Control Of The Motor Power Supply And Also Prevents Shop Dust From Entering..
Applications: 3 Phase Magnetic Switch Boxes Are Suitable For All Air Compressor And Water Applications, As Well As Motor Start Control Applications Such As Textile Machinery, Agricultural Machinery, Exhaust Equipment And Other Mechanical Equipment..
Easy To Install: The Steel Enclosure Has Four 3/4-Inch Punched Holes For Input And Output Wires.The 3/4-Inch Holes Have Three Rubber Grommets To Protect Connecting Wires..
High Quality: Magnetic Electric Motor Starter Is Made Of Steel Housing And Durable Contactor With On/Off Button. Built-In Overload Protection For Stable Performance And 24 Hours Motor Protection..
Features
- Air Compressor Magnetic Starter Rated Power: 7.5HP, 220-240V, maximum current 40A, one for two, motor starter can be used for single-phase motors as well as three-phase motors.
- HIGH QUALITY: Magnetic Electric Motor Starter is made of steel housing and durable contactor with on/off button. Built-in overload protection for stable performance and 24 hours motor protection.
- EASY TO USE:The Magnetic starter's electrical switch box is controlled by a color-coded on/off button, which allows direct control of the motor power supply and also prevents shop dust from entering.
- EASY TO INSTALL: The steel enclosure has four 3/4-inch punched holes for input and output wires.The 3/4-inch holes have three rubber grommets to protect connecting wires.
- APPLICATIONS: 3 phase magnetic switch boxes are suitable for all air compressor and water applications, as well as motor start control applications such as textile machinery, agricultural machinery, exhaust equipment and other mechanical equipment.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #3
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R75 25 x 38mm L1000mm for Electrical CNC Router Machines
Asin: B07KSRZDGP | Model: YDL2018111341 | PartNumber: YDL2018111341 | Ean: 5997740271256
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 25x38mm(InnerH*InnerW);External Size: 40x55mm(OuterH*OuterW) Bending radius: R75; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #4
1/2-Inch Shank 1/2-Inch Cutting Dia 2 Flute Carbide Tipped Round Shank Cleaning Bottom Router Bit Wood Cutter
Asin: B07K5LX87H | Model: YDL2018110108 | PartNumber: YDL2018110108 | Ean: 5997740265293
Carbide Cutters, Solid Hardened Steel Bodies With Anti-Kickback Design.
Featured With Double Flutes, Straight Shank.Overlapped Carbide Produces A Smooth Flat Bottom Cut..
Use On Cnc And Other Automatic Routers.
1/2 Inch Shank And 1/2 Inch Cutting Diameter.
Features
- Industrial Quality Bottom Cleaning Router Bits
- 1/2 inch shank and 1/2 inch cutting diameter
- Carbide cutters, solid hardened steel bodies with Anti-Kickback Design
- Use on CNC and other automatic routers
- Featured with double flutes, straight shank.Overlapped carbide produces a smooth flat bottom cut.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #5
3W LED Driver 300mA Constant Current High Power AC 85-265V Output 5-12V SM Male Connector External Power Supply LED Ceiling Lamp Rectifier Transformer
Asin: B0C6MF8CMB | Model: YDL018 | PartNumber: YDL018
Advantage: Led Driver With Ce Certification, Durable Use. With High Power, Low Heat, Good Efficiency, Over-Current Protection And Short-Circuit Protection..
Installation: Please Use It Under The Guidance Of Professional Electrician. Led Driver Is Easy To Install, Pay Attention To The Neutral Wire (Blue Wire) And Load Wire (Brown Wire) Of Led Products Installed Accordingly To Avoid Damage, And Keep The Wire Away From Water..
Applications: These Led Drivers Are Suitable For Led Bulbs And Also For Most Led Strips, Such As Led Mirror Front Light, Spot Light, Led Cabinet Light, Led Kitchen Light..
Specifications: Power: 3W; Input Voltage: Ac85-265V; Output Voltage: Dc5-12V; Current: 300Ma; Size: 63*33*22Mm/2.48*1.29*0.86 Inches (L×W×H)..
Features
- Purchase Note: Please make sure that the maximum wattage of the strip light does not exceed the maximum output power of the LED driver.
- Specifications: Power: 3W; Input voltage: AC85-265V; Output voltage: DC5-12V; Current: 300mA; Size: 63*33*22mm/2.48*1.29*0.86 inches (L W H).
- Advantage: LED driver with CE certification, durable use. With high power, low heat, good efficiency, over-current protection and short-circuit protection.
- Applications: These LED drivers are suitable for LED bulbs and also for most LED strips, such as LED mirror front light, spot light, LED cabinet light, LED kitchen light.
- Installation: Please use it under the guidance of professional electrician. LED driver is easy to install, pay attention to the neutral wire (blue wire) and load wire (brown wire) of LED products installed accordingly to avoid damage, and keep the wire away from water.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #6
12-18W LED Driver, Constant Current 200-300mA AC 85-265V Output 36-63V DC Female Connector Rectifier Transformer External Power Supply
Asin: B0C6XMS5BQ | Model: YDL20 | PartNumber: YDL20
Features
- Installation: Please use it under the guidance of professional electrician. LED driver is easy to install, pay attention to the neutral wire (blue wire) and load wire (brown wire) of LED products installed accordingly to avoid damage, and keep the wire away from water.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #7
Mini LED PIR Motion Sensor Switch, DC 5-24V 2A Infrared Activated LED Switch Controller with USB Couple Cable for LED Strips Lights
Asin: B0C6XSTVCY | Model: YDL34 | PartNumber: YDL34
Advantages:1. The Led Sensor Is Designed With Abs Plastic, Which Is Very Durable And Well Insulated. 2. Mini Size Does Not Take Up Space. 3. The Switch Setting Can Be Delayed From 5-3600 Seconds, Saving Time And Energy. 4. Infrared Auto-Sensing Device No Longer Needs To Manually Switch The Light On And Off, Freeing Your Hands..
Note:1. Please Do Not Expose It To Direct Sunlight, Heater, Strong Wind Or Air Conditioner. 2. Please Do Not Fix It On The Obstacle That Infrared Can Not Penetrate. 3. The Signal Output Line And Input Line Of The Controller Should Be Connected Correctly..
Tips For Use:When The Pir Sensor Starts, The Signal Triggered By The Module Is Unstable And Needs A Warm-Up 1Min To Work Properly. The Installation Direction Is Left And Right, The Signal Will Be Better..
Parameters: The Led Motion Sensor Switch Output Current: <2A; Operating Voltage: Dc 5-24V; Output Power: <20W; Delay Time: 5-3600 Seconds; Size: 36X36x27mm/1.42X1.42X1.06 Inches (L*W*H); Total Length (Including Cable): 30.5Cm/12".
Features
- PIR motion sensor : The infrared human sensor switch are widely used in LED light strips, motion lighting, human monitoring, automatic sensing devices, etc. through motion control.
- parameters: The LED motion sensor switch output current: <2A; Operating voltage: DC 5-24V; Output power: <20W; Delay time: 5-3600 seconds; Size: 36x36x27mm/1.42x1.42x1.06 inches (L*W*H); Total length (including cable): 30.5cm/12
- Advantages 1. The LED sensor is designed with ABS plastic, which is very durable and well insulated. 2. Mini size does not take up space. 3. The switch setting can be delayed from 5-3600 seconds, saving time and energy. 4. Infrared auto-sensing device no longer needs to manually switch the light on and off, freeing your hands.
- Tips for Use When the PIR sensor starts, the signal triggered by the module is unstable and needs a warm-up 1min to work properly. The installation direction is left and right, the signal will be better.
- Note 1. Please do not expose it to direct sunlight, heater, strong wind or air conditioner. 2. Please do not fix it on the obstacle that infrared can not penetrate. 3. The signal output line and input line of the controller should be connected correctly.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #8
Plastic Drag Chain Cable Carrier Open Type with End Connectors R150 25 x 77mm L1000mm for Electrical CNC Router Machines
Asin: B07KJD4DFS | Ean: 5997740271522
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 25x77mm(InnerH*InnerW);External Size: 40x94mm(OuterH*OuterW) Bending radius: R150; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #9
Plastic Drag Chain Cable Carrier Open Type with End Connectors R75 35 x 50mm L1000mm for Electrical CNC Router Machines
Asin: B07KJCMCPV | Model: YDL2018111326 | PartNumber: YDL2018111326 | Ean: 5997740271591
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x50mm(InnerH*InnerW);External Size: 55x72mm(OuterH*OuterW) Bending radius: R75; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #10
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R100 25 x 57mm L1000mm for Electrical CNC Router Machines
Asin: B07KSTTPSK | Model: YDL2018111343 | PartNumber: YDL2018111343 | Ean: 5997740271270
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 25x57mm(InnerH*InnerW);External Size: 40x74mm(OuterH*OuterW) Bending radius: R125; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #11
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R150 45 x 100mm L1000mm for Electrical CNC Router Machines
Asin: B07KSSCF3K | Ean: 5997740271195
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 45x100mm(InnerH*InnerW);External Size: 65x130mm(OuterH*OuterW) Bending radius: R150; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #12
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R125 35 x 75mm L1000mm for Electrical CNC Router Machines
Asin: B07KSRZLTN | Model: YDL2018111350 | PartNumber: YDL2018111350 | Ean: 5997740271126
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x75mm(InnerH*InnerW);External Size: 55x97mm(OuterH*OuterW) Bending radius: R125; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #13
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R125 45 x 75mm L1000mm for Electrical CNC Router Machines
Asin: B07KST99X3 | Ean: 5997740271188
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 45x75mm(InnerH*InnerW);External Size: 65x105mm(OuterH*OuterW) Bending radius: R125; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #14
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R75 30 x 50mm L1000mm for Electrical CNC Router Machines
Asin: B07KSRM1GK | Ean: 5997740271300
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 30x50mm(InnerH*InnerW);External Size: 45x70mm(OuterH*OuterW) Bending radius: R75; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #15
Plastic Drag Chain Cable Carrier Open Type with End Connectors R150 30 x 103mm L1000mm for Electrical CNC Router Machines
Asin: B07KJNZL7L | Ean: 5997740271584
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 30x103mm(InnerH*InnerW);External Size: 45x125mm(OuterH*OuterW) Bending radius: R150; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #16
Plastic Drag Chain Cable Carrier Open Type with End Connectors R150 35 x 100mm L1000mm for Electrical CNC Router Machines
Asin: B07KJGKFPV | Ean: 5997740271621
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x100mm(InnerH*InnerW);External Size: 55x122mm(OuterH*OuterW) Bending radius: R150; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #17
1/4-Inch Shank 3/8-Inch Cutting Dia 2-Flute Carbide Tipped Cleaning Bottom Router Bit Cutter
Asin: B07K5K78FT | Model: YDL2018110120 | PartNumber: YDL2018110120 | Ean: 5997740265415
Carbide Cutters, Solid Hardened Steel Bodies With Anti-Kickback Design.
Featured With Double Flutes, Straight Shank.Overlapped Carbide Produces A Smooth Flat Bottom Cut..
Use On Cnc And Other Automatic Routers.
1/4 Inch Shank And 3/8 Inch Cutting Diameter.
Features
- Industrial Quality Bottom Cleaning Router Bits
- 1/4 inch shank and 3/8 inch cutting diameter
- Carbide cutters, solid hardened steel bodies with Anti-Kickback Design
- Use on CNC and other automatic routers
- Featured with double flutes, straight shank.Overlapped carbide produces a smooth flat bottom cut.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #18
Plastic Drag Chain Cable Carrier Open Type with End Connectors R150 45 x 100mm L1000mm for Electrical CNC Router Machines
Asin: B07KJQ6RG3 | Ean: 5997740271683
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 45x100mm(InnerH*InnerW);External Size: 65x130mm(OuterH*OuterW) Bending radius: R150; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #19
AKZYTUE Plastic Drag Chain Cable Carrier Closed Type with End Connectors R150 35 x 100mm L1000mm for Electrical CNC Router Machines
Asin: B07KSS2WX4 | Ean: 5997740271133
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x100mm(InnerH*InnerW);External Size: 55x122mm(OuterH*OuterW) Bending radius: R75; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #20
Plastic Drag Chain Cable Carrier Semi Closed with End Connectors R38 18 x 25mm L1000mm for Electrical CNC Router Machines
Asin: B07KJHZB6Z | Model: YDL2018111311 | PartNumber: YDL2018111311 | Ean: 5997740271447
Semi-Closed,Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 18x25mm(InnerH*InnerW);External Size: 23x35mm(OuterH*OuterW) Bending radius: R38; Length: 1M(39.42inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Semi-closed,Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #21
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R100 35 x 60mm L1000mm for Electrical CNC Router Machines
Asin: B07KSSLKPJ | Model: YDL2018111349 | PartNumber: YDL2018111349 | Ean: 5997740271331
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x60mm(InnerH*InnerW);External Size: 55x82mm(OuterH*OuterW) Bending radius: R100; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #22
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R15 7 x 7mm L1000mm for Electrical CNC Router Machines
Asin: B07KJNWSJX | Model: YDL2018111301 | PartNumber: YDL2018111301 | Ean: 5997740271348
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 7x7mm(InnerH*InnerW);External Size: 10x12.5mm(OuterH*OuterW) Bending radius: R15; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #23
Plastic Drag Chain Cable Carrier Open Type with End Connectors R55 25 x 25mm L1000mm for Electrical CNC Router Machines
Asin: B07KJN4RG1 | Ean: 5997740271485
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 25x25mm(InnerH*InnerW);External Size: 40x42mm(OuterH*OuterW) Bending radius: R55; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #24
Plastic Drag Chain Cable Carrier Open Type with End Connectors R125 35 x 75mm L1000mm for Electrical CNC Router Machines
Asin: B07KJH39FB | Model: YDL2018111328 | PartNumber: YDL2018111328 | Ean: 5997740271614
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x75mm(InnerH*InnerW);External Size: 55x97mm(OuterH*OuterW) Bending radius: R125; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #25
Plastic Drag Chain Cable Carrier Open Type with End Connectors R250 35 x 150mm L1000mm for Electrical CNC Router Machines
Asin: B07KJBYP1F | Ean: 5997740271645
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 35x150mm(InnerH*InnerW);External Size: 55x172mm(OuterH*OuterW) Bending radius: R250; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #26
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R55 30 x 38mm L1000mm for Electrical CNC Router Machines
Asin: B07KSS9WQX | Model: YDL2018111345 | PartNumber: YDL2018111345 | Ean: 5997740271294
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 30x38mm(InnerH*InnerW);External Size: 45x58mm(OuterH*OuterW) Bending radius: R55; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #27
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R18 10 x 20mm L1000mm for Electrical CNC Router Machines
Asin: B07KJLBSJP | Model: YDL2018111304 | PartNumber: YDL2018111304 | Ean: 5997740271379
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 10x20mm(InnerH*InnerW);External Size: 14x28mm(OuterH*OuterW) Bending radius: R18; Length: 1M(39.38inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #28
5/16-Inch Cutter Diameter, 1/2-inch Straight Shank, Tungsten Steel Core Box Router Bit for Handheld Table Mounted and CNC Routers
Asin: B07K5LJ9JP | Model: YDL2018110139 | PartNumber: YDL2018110139 | Ean: 5997740265606
* Solid Hardened Steel Bodies With Anti-Kickback Design.
* Use On Cnc And Other Automatic Routers As Well As Hand-Held And Table-Mounted Portable Routers.
* Round Nose Routers For Cutting, Beading, Fluting And General Ornamentation..
* 5/16 Inch Cutting Diameter, 5/32 Inch Cutting Radius, 1/2 Inch Steel Shank.
Features
- * Industrial Quality Carbide Core Box Router Bit
- * 5/16 Inch Cutting Diameter, 5/32 Inch Cutting Radius, 1/2 Inch Steel Shank
- * Solid hardened steel bodies with Anti-Kickback Design
- * Round nose routers for cutting, beading, fluting and general ornamentation.
- * Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #29
Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 25mm L1000mm for Electrical CNC Router Machines
Asin: B07KJT4WR2 | Model: YDL2018111312 | PartNumber: YDL2018111312 | Ean: 5997740271454
Can Not Be Opened.Reinforced Nylon, Low Temperature Resistance, Wear Resistance, Corrosion Resistance..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 18x25mm(InnerH*InnerW);External Size: 23x35mm(OuterH*OuterW) Bending radius: R38; Length: 1M(39.42inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon #30
Plastic Drag Chain Cable Carrier Open Type with End Connectors R75 25 x 38mm L1000mm for Electrical CNC Router Machines
Asin: B07KJJ2HN3 | Ean: 5997740271492
Opened. Movement, Low Noise, Wear-Resistant, High-Speed Movement..
The Drag Chain Has Been Widely Used In Cnc Machine Tools, Electronic Equipment, Fire Machinery, Stone Machinery, Glass Machinery, Doors And Windows Machinery, Injection Molding Machines, Robots, Overweight Transportation Equipment, Automated Warehouses And So On..
Note: When The Moving Terminal Is Bent As "U" Shape, The Longer Part Will Lay Flat. Or The Tail Of The Chain Will Bend Upward..
Change Size: You Could Link The Cables With Each Other To Form One Long Length You Need..
Features
- Internal Size: 25x38mm(InnerH*InnerW);External Size: 40x55mm(OuterH*OuterW) Bending radius: R75; Length: 1M(39.37inch)
- Change Size: You could link the cables with each other to form one long length you need.
- Opened. Movement, low noise, wear-resistant, high-speed movement.
- NOTE: When the moving terminal is bent as U shape, the longer part will lay flat. Or the tail of the chain will bend upward.
- The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
- See more on Amazon...
Brand: AKZYTUE | Manufacturer: AKZYTUE
See On Amazon