AODITECK - Buying Guide

Bestselling from AODITECK on Amazon

1. AODITECK Model 3 Trunk Hook Aluminum Trunk Grocery Bag Hook for 2016-2024 Tesla Model 3 Metal Tote G...
2. AODITECK Fuel Sending Unit Gasket Fuel Sender Gasket Marine Fuel Sender Gasket Gasket Kit (NBR) for ...
3. AODITECK 240-33 ohms 8"(200mm) Boat Fuel Tank Sending Unit Fuel Sending Unit Marine Truck Car Fuel W...
4. 5.5" Fuel Sending Unit Marine Boat Car Truck Bundle AODITECK Fuel Level Gauge Universal for Boat Car...
5. 7.5" Fuel Sending Unit Marine Boat Car Truck Bundle AODITECK Fuel Level Gauge Universal for Boat Car...
6. AODITECK Marine Fuel Sending Unit 24" (240-33 ohms) for Boat Car Truck Bundle Marine Fuel Level Gaug...
7. AODITECK 9" Boat Fuel Sending Unit Marine Boat Car Truck Bundle AODITECK Fuel Level Gauge Universal ...
8. AODITECK Marine Fuel Sending Unit 17" (240-33 ohms) for Boat Car Truck Bundle Marine Fuel Level Ga...
9. AODITECK Marine Fuel Sending Unit 6.5" for Boat Car Truck Bundle Fuel Level Gauge Universal for Boat...
10. AODITECK Marine Fuel Sending Unit 5" (240-33 ohms) for Boat Car Truck Bundle Marine Fuel Level Gauge...

Features

• Update Version We heard from customers that the old hook was too short and they wanted a metal one for strength, and it should have a longer neck giving more room from the interior trunk roof. Our R&D has redesigned : The new trunk grocery bag hook is longer, skinnier and softer around the edges to be not as sharp, No need to worry about it will injure the plastic Shopping Bag.Besides, the bigger arm allows to get bags hooked and unhooked easier.
• Sturdy Construction Our Trunk Grocery hook is made with high-strength Aluminium Alloy which is durable but light weight. It s Strong enough to hold lots of weight, We did a bit of a Weight Test with a 50lb Bag of Flour and It Held up Just Fine. It can be to accommodate larger items like gym bags or backpacks to prevent them from rolling around the trunk.
• Metallic finish,Neat and Radius Design This Aluminum hook had a metallic finish.Besides, We have made the edge a bit rounder. It s smooth and will never hurt the finger a bit if touch them unintentionally. The old version with little teeth to prevent the bag from moving, but can sometimes be a pain to unhook the bag when you want.
• Nice add-on and Easiest Installation Takes advantage of what was just an exposed screw. Installs in 8 seconds! Adds safety to protect your head It will also prevents you from slamming your hand on that raw bottom of the screw. Adds benefit of No more spilled groceries!
• Come in Handy No need to be afraid the plastic ones with the threaded metal inserts will pull out if too heavy of bags are used.It s for all Tesla Model 3 with the protruding Screw within the trunk. (Does NOT fit Model S, X and Y)
• See more on Amazon...

Features

• 1.Complete with 5pcs of Stainless Steel M5 Screws and 1pc SAE of 5 Hole Cork Gasket(NBR)
• 2. Matched the original holes perfectly. Good to have when replacing sender
• 3. It's Designed for Top Mounting in Plastic or Metal Fuel tank on All Type of Marine Vessel
• See more on Amazon...

Features

• Great replacement fuel sender The advantage of This doughnut float design type level sender over thick-film swim arm type level Sender is the reed switch's durability and reliability.
  Additionally, no moving parts to break. No adjustment needed for tank. It could support fuel level gauge and water Tank Gauge for Boat/RV/Truck.
  
• AODITECK Fuel Gauge : You can purchase an AODITECK fuel level gauge in conjunction with an AODITECK sending unit If your boat/camper didn t have a fuel gauge, Both Will Work Great Together.
  There are several series gauge models at option.
  
• More Reliable and Quality Construction All the AODITECK Fuel Sending Units are made With series of Highquality reed switches and fixed resistors. SAE 5 hole mounting pattern, heavy duty SUS 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms.
  
• Easy to Install, Easy Hookup! The AODITECK Fuel Level sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting your fuel gauge working again.
  
• Note : to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  The Diameter of Float is 1.38(35mm). If You Have to Drill the hole, Diameter 1-1/2(38mm) Hole Would be Perfect.
  AODITECK Sender is with Non-Linear Output, It can only match with standard gauge with Non-Linear signal.
  
• See more on Amazon...

Features

• AODITECKFuleLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,nomovingpatstoeak.Noadjustmentneededfotank.SAE5holemountingpatten,heavyduty316stainlesssteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• InstallationofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• SpecificationsofFuelLevelGaugeUnivesal:Fixingdimension:52mm(2)o2-1/16''-IndicatingRange:0-100%-SignalAdjustale:0-190ohm,240-33ohm,240-30ohm,0-180ohm,10-180ohm-WokingVoltage:9-32V(12V/24V)-Opeationmode:LCDdisplay,steppemotoPackageIncludes:/1xFuelLevelGauge1xWiinghaness1xInstallationInstuction
• EasytoinstallandCaliate /Installdiamete: 52mmo2-1/16'',Indicationange:E~F,Wokingvoltage:9-32vdc[fit12V-24VVehicleoEngine]TheinstuctionisEasytoFollowandtheInstallationTakeslessthan15Minutes. 7ColoAdjustmentCycleModes /IncludesRed(Default),Geen,Blue,White,Yellow,Teal,Oange,PupleAllowYoutoMatchYouFactoyDashoadLightsoAddaCustomStyletotheInteioofYouVehicle.
• Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchWateLeftintheTank./
• See more on Amazon...

Features

• AODITECKFuleLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,nomovingpatstoeak.Noadjustmentneededfotank.SAE5holemountingpatten,heavyduty316stainlesssteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• InstallationofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• SpecificationsofFuelLevelGaugeUnivesal:Fixingdimension:52mm(2)o2-1/16''-IndicatingRange:0-100%-SignalAdjustale:0-190ohm,240-33ohm,240-30ohm,0-180ohm,10-180ohm-WokingVoltage:9-32V(12V/24V)-Opeationmode:LCDdisplay,steppemotoPackageIncludes:/1xFuelLevelGauge1xWiinghaness1xInstallationInstuction
• EasytoinstallandCaliate /Installdiamete: 52mmo2-1/16'',Indicationange:E~F,Wokingvoltage:9-32vdc[fit12V-24VVehicleoEngine]TheinstuctionisEasytoFollowandtheInstallationTakeslessthan15Minutes. 7ColoAdjustmentCycleModes /IncludesRed(Default),Geen,Blue,White,Yellow,Teal,Oange,PupleAllowYoutoMatchYouFactoyDashoadLightsoAddaCustomStyletotheInteioofYouVehicle.
• Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchWateLeftintheTank./
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• AODITECKFuleLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,nomovingpatstoeak.Noadjustmentneededfotank.SAE5holemountingpatten,heavyduty316stainlesssteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• InstallationofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• SpecificationsofFuelLevelGaugeUnivesal:Fixingdimension:52mm(2)o2-1/16''-IndicatingRange:0-100%-SignalAdjustale:0-190ohm,240-33ohm,240-30ohm,0-180ohm,10-180ohm-WokingVoltage:9-32V(12V/24V)-Opeationmode:LCDdisplay,steppemotoPackageIncludes:/1xFuelLevelGauge1xWiinghaness1xInstallationInstuction
• EasytoinstallandCaliate /Installdiamete: 52mmo2-1/16'',Indicationange:E~F,Wokingvoltage:9-32vdc[fit12V-24VVehicleoEngine]TheinstuctionisEasytoFollowandtheInstallationTakeslessthan15Minutes. 7ColoAdjustmentCycleModes /IncludesRed(Default),Geen,Blue,White,Yellow,Teal,Oange,PupleAllowYoutoMatchYouFactoyDashoadLightsoAddaCustomStyletotheInteioofYouVehicle.
• Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchWateLeftintheTank./
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit: ''Easy to install, easy hookup!'' The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1'' less than the depth of the tank if tank is plastic, and 0.5'' less than the depth of the tank if tank is metal .
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug - Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• AODITECKFuleLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,nomovingpatstoeak.Noadjustmentneededfotank.SAE5holemountingpatten,heavyduty316stainlesssteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• InstallationofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• SpecificationsofFuelLevelGaugeUnivesal:Fixingdimension:52mm(2)o2-1/16''-IndicatingRange:0-100%-SignalAdjustale:0-190ohm,240-33ohm,240-30ohm,0-180ohm,10-180ohm-WokingVoltage:9-32V(12V/24V)-Opeationmode:LCDdisplay,steppemotoPackageIncludes:/1xFuelLevelGauge1xWiinghaness1xInstallationInstuction
• EasytoinstallandCaliate /Installdiamete: 52mmo2-1/16'',Indicationange:E~F,Wokingvoltage:9-32vdc[fit12V-24VVehicleoEngine]TheinstuctionisEasytoFollowandtheInstallationTakeslessthan15Minutes. 7ColoAdjustmentCycleModes /IncludesRed(Default),Geen,Blue,White,Yellow,Teal,Oange,PupleAllowYoutoMatchYouFactoyDashoadLightsoAddaCustomStyletotheInteioofYouVehicle.
• Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchWateLeftintheTank./
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Yellow Green, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Sending Unit is the Direct Replacement for the Swingarm Sender for Better Durability and Reliability. AODITECK Fuel gauges allows the user to remotely monitor the liquid level in the tank. These level gauges will work with any level sender with the corresponding resistive output 240-33ohms. Specification of Fuel Tank Sending Unit
  Length: 8"
  Resolution Range: 21mm
  Mounting Methods: Standard SAE 5 hole pattern.
  Material:Body: SUS 316 Stainless Steel.
  Li
• Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• 1)AODITECKFuelLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,NoMovingPatstoBeak.NoAdjustmentNeededfoTank.SAE5HoleMountingPatten,HeavyDuty316StainlessSteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• 2) GasketandMountingScewsofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• 3)FuelGaugeBodyMateial:IP67watepoofandDustpoofgade316StainlessSteelBezelSignal:240to33ohmIndicatingRange:EmptytoFull,Wokingvoltage:9to32VGOODReadaility,GeatVisualContastonGaugeFace.TheRedBacklightingisnottooBightoDim,LooksReallyGoodduingtheDayutEvenBetteatNightlitup.
• 4) EasytoMount,ConvenienttoWiewiththePlug /Mountingsize:21/16inch,o52mmTheInstuctionsisEasytoFollow.
• 5)Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchLiquidLeftintheTank./
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• AODITECKFuleLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,nomovingpatstoeak.Noadjustmentneededfotank.SAE5holemountingpatten,heavyduty316stainlesssteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• InstallationofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• SpecificationsofFuelLevelGaugeUnivesal:Fixingdimension:52mm(2)o2-1/16''-IndicatingRange:0-100%-SignalAdjustale:0-190ohm,240-33ohm,240-30ohm,0-180ohm,10-180ohm-WokingVoltage:9-32V(12V/24V)-Opeationmode:LCDdisplay,steppemotoPackageIncludes:/1xFuelLevelGauge1xWiinghaness1xInstallationInstuction
• EasytoinstallandCaliate /Installdiamete: 52mmo2-1/16'',Indicationange:E~F,Wokingvoltage:9-32vdc[fit12V-24VVehicleoEngine]TheinstuctionisEasytoFollowandtheInstallationTakeslessthan15Minutes. 7ColoAdjustmentCycleModes /IncludesRed(Default),Geen,Blue,White,Yellow,Teal,Oange,PupleAllowYoutoMatchYouFactoyDashoadLightsoAddaCustomStyletotheInteioofYouVehicle.
• Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchWateLeftintheTank./
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• AODITECKFuleLevelSensoistheDiecteplacementfoSwingamSende.Theadvantageofdoughnutfloatdesigntypelevelsendeovethick-filmswimamtypelevelsendeistheeedswitch'sduailityandeliaility.Additionally,nomovingpatstoeak.Noadjustmentneededfotank.SAE5holemountingpatten,heavyduty316stainlesssteelSignalOutput:240-33ohms.WideApplication:ItCanSuppotWate/FuelLevelGaugeandfoBoatoAuto.
• InstallationofBoatFuleSendingUnit /Easytoinstall,easyhookup!/TheFuelsendingunitcomeswithgasket,mountingscews,well-wittenandillustatedinstuctions;Thewiinginstuctionsaestaightfowadandeasytofollow.Note:toallowthesendenothittheottomofthetank,thelengthofsendeshoulde1lessthanthedepthofthetankiftankisplastic,and0.5lessthanthedepthofthetankiftankismetal./
• SpecificationsofFuelLevelGaugeUnivesal:Fixingdimension:52mm(2)o2-1/16''-IndicatingRange:0-100%-SignalAdjustale:0-190ohm,240-33ohm,240-30ohm,0-180ohm,10-180ohm-WokingVoltage:9-32V(12V/24V)-Opeationmode:LCDdisplay,steppemotoPackageIncludes:/1xFuelLevelGauge1xWiinghaness1xInstallationInstuction
• EasytoinstallandCaliate /Installdiamete: 52mmo2-1/16'',Indicationange:E~F,Wokingvoltage:9-32vdc[fit12V-24VVehicleoEngine]TheinstuctionisEasytoFollowandtheInstallationTakeslessthan15Minutes. 7ColoAdjustmentCycleModes /IncludesRed(Default),Geen,Blue,White,Yellow,Teal,Oange,PupleAllowYoutoMatchYouFactoyDashoadLightsoAddaCustomStyletotheInteioofYouVehicle.
• Takesaout15MinutestoInstallBothofThem,YouWillknowHowMuchWateLeftintheTank./
• See more on Amazon...

Features

• AODITECK Fule Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank.SAE 5 hole mounting pattern, heavy duty 316 stainless steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• Installation of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• Specifications of Fuel Level Gauge Universal : Fixing dimension: 52mm(2) or 2-1/16''
  -Indicating Range: 0-100%
  -Signal Adjustable : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm
  -Working Voltage: 9-32V(12V/24V)
  -Operation mode: LCD display, stepper motor
  Package Includes:
  1x Fuel Level Gauge
  1 x Wiring harness
  1x Installation Instruction
  
• Easy to install and Calibrate Install diameter: 52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy to Follow and the Installation Takes less than 15 Minutes.
  7 Color Adjustment Cycle Modes Includes Red(Default), Green, Blue, White, Yellow, Teal, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
  
• Takes about 15 Minutes to Install Both of Them, You Will know How Much Water Left in the Tank.
• See more on Amazon...

Features

• 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
• 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
  The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
  Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
  
• 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
• 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
• 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
• See more on Amazon...