Ade Advanced Optics - Buying Guide
Last Updated: 04/19/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun - Not Red
Asin: B074ZTGXKJ | Model: RD3-006B | PartNumber: RD3-006B | Ean: 0640978398459 | UPC: 640978398459
Since Its Initial Release In 2014, We've Implemented Numerous Improvements To Enhance Its Durability, Ensuring It Can Withstand Recoil While Also Improving Its Ability To Hold Zero. The Front Switch, Battery Housing, And Hardware Have All Been Recently Updated, Reflecting Our Commitment To Continuous Enhancement. This Product Is Proudly Designed In Oregon..
Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Nuwa Pro And Rd3-030 Apollo Fit Optic Cut/Optic Plate That Is Compatible With Shield Rms/Rmsc/Deltapoint Pro Footprint.
Ade Rd3-021C Nuwacc Fits Optic Cut/Optic Plate That Is Compatible With Trijicon Rmrcc Footprint.
If You're Not Seeing A Perfect Round Dot But Instead Observe A Splashed Dot, Half-Moon Shape, Multi-Dot, Or Starburst, There's A High Probability (99%) That You Might Have Astigmatism Without Being Aware Of It. What You Perceive Is Likely A Small Reflection Of The Led Light On The Lens. A Quick And Simple Way To Confirm This Is By Using Your Cellphone To Take A Photo Of The Dot. If The Photo Shows A Circular Dot, You've Essentially Diagnosed Yourself With Astigmatism..
Ade Rd3-006 Huracan,Rd3-009 Crusader,Rd3-012 Delta, Rd3-012 Pro, Rd3-013 Bertrillium ,Rd3-015 Zantitium, Rd3-028 Ares Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint.
Although It's Feasible To Install The Optic On A Handgun Without The Assistance Of A Gunsmith, We Highly Recommend Seeking The Expertise Of A Professional For The Installation Process. It's Essential To Note That Unprofessional Installations, Such As Improper Torque Application, Can Lead To Issues Like Loose Screws, An Inability To Hold Zero, Damage To The Firearm Or Optic, And Even Pose A Risk Of Personal Injury..
Ade Rd3-019 Stingray, Rd3-020 Raptor, Rd3-022 Artemis, Rd3-023 Valkyrie And Rd3-029 Trumpet Fit Optic Cut/Optic Plate/ That Is Compatible With Trijicon Rmr/Sro/Holosun 407C/507C Footprint.
The On/Off Switch For This Sight Is Conveniently Positioned At The Front, Making It Much Easier To Press Compared To Red Dots With Side-Mounted Switches. It Features A 3 Moa Dot Size And Offers 5 Illumination Settings. The Sight Is Fully Adjustable For Windage And Elevation And Can Be Locked Into Place. With Unlimited Eye Relief And Various Illumination Settings, It Is Powered By An Included Lithium Cr2032 Battery..
Features
- This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint Plate/Slide seamlessly.
- The on/off switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.
- Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.
- Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
- ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
- ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
- ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
- ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Dimensions: 2.50 x 4.80 x 2.00 inches | Weight: 0.40 pounds
Warranty: 1 year
See On Amazon #2
ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol
Asin: B07TCR88WS
We Have Made Several Improvements Since It's Initial Release In 2015. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon. The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side..
Many Users With Astigmatism Decide To Continue To Use The Imperfect Dot, Or Use A Bigger Moa Red Dot Such As 6Moa Instead Of 3Moa. Some Users Also See Green Dots Better Than Red Dots, It Really Depends On The Individual Case. Or Users Can Use A Totally Different Optics Which Is Not A Reflex Sight Such As A Rifle Scope..
4 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Why Don’T I See A Perfect Round Dot? Instead, I See A Splashed Dot, Half-Moon Shape, Multi Dot, Starburst Etc. Answer: It Is Very Likely (99% Chance) You Have Astigmatism That You Are Not Aware. What You See Is A Led Light Image Reflected On The Lens. One Simple Way To Find Out Is To Use Your Cellphone To Take A Photo Of The Dot. If You See A Circle Dot In The Photo You Took, You Basically Diagnosed You Have Astigmatism(Because Cellphone Is A Machine Does Not Has Human Astigmatism)..
Shock/Fog Proof. It Is Rain Resistant, But Not Waterproof. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
The Included Glock Plate Also Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications. While It Is Possible To Install This Mount Without The Use Of A Gunsmith, We Recommend Hiring A Professional Gunsmith.
Features
- This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith
- We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.
- Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Why don t I see a perfect round dot? Instead, I see a splashed dot, half-moon shape, multi dot, starburst etc. Answer: It is very likely (99% chance) you have astigmatism that you are not aware. What you see is a led light image reflected on the lens. One simple way to find out is to use your cellphone to take a photo of the dot. If you see a circle dot in the photo you took, you basically diagnosed you have Astigmatism(Because cellphone is a machine does not has human astigmatism).
- Many users with astigmatism decide to continue to use the imperfect dot, or use a bigger MOA red dot such as 6MOA instead of 3MOA. Some users also see green dots better than red dots, it really depends on the individual case. Or users can use a totally different optics which is not a reflex sight such as a rifle scope.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.13 pounds
See On Amazon #3
ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire
Asin: B01L9734Y6 | Model: glock | PartNumber: glock | Ean: 0710500205576 | UPC: 710500205576
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium), Vortex Venom/Viper, Burris Fastfire, Meopta, Shield, Docter, Insight Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
This Optic Mounting Plate Also Fits Other Red Dot Brands Such As Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not Fit Trijicon Rmr/Holosun/Shield Footprint Red Dots..
The Included Glock Plate Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications..
Features
- This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots.
- This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.01 pounds
See On Amazon #4
Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield SD9VE,SD40VE Pistol and Also a Standard Picatinny Mount
Asin: B07T86FZG8
The Pistol Mount Included For Sw Does Not Fit Any Ez, 380, Ez 380 Models, Such As M&P Shield Ez, M&P 380 Shield Ez. Any Shield Or Mp Model That Is Ez Or 380 This Optic Plate Will Not Fit..
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
This Ade Rd3-009 Crusader Have Made Several Improvements Since It's Initial Release In 2016. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
The Pistol Mount Included For Sw Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma, 1911.
Features
- Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, M&P Shield, SD9VE, SD40VE.
- The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911
- The pistol mount included for SW does NOT fit any EZ, 380, EZ 380 models, such as M&P SHIELD EZ, M&P 380 SHIELD EZ. Any Shield or MP model that is EZ or 380 this Optic Plate WILL NOT FIT.
- This ADE RD3-009 Crusader have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 pounds
See On Amazon #5
Optic Delrin Shim to give Extra ELAVATION Range for Holosun 407K/507K Shield, Sig Sauer Romeo Zero, Leupold Delta Point Pro and JP Enterprises Micro Red dot Sight
Asin: B07Y3Y1T96
Does Not Fit Trijicon Rmr/Sro, Doctor, Vortex Venom/Viper, Burris Fastfire, Ade Rd3-006/009/012/013.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. ..
Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree.
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
Fits: Shield Rms/Rmsc/Rmsw/Sms, Ade Rd3-018 Spike, Sig Sauer Romeo Zero, Leupold Delta Point Pro, Jp Enterprises Jpoint, Swampfox Sentinel Red Dot Sight. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
Features
- Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Does NOT fit Trijicon RMR/SRO, Doctor, Vortex Venom/Viper, Burris Fastfire, ADE RD3-006/009/012/013
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. .
- Scope base shims Tolerance +/-.005 Taper 1.0 degree
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #6
Ade Advanced Optics RD3-009-2 Red Dot Sights
Asin: B00OJHL5RC | Model: RD3-009-2 | PartNumber: RD3-009-2 | Ean: 0710500199165 | UPC: 710500199165
This Red Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.45 pounds
Warranty: 1 year
See On Amazon #7
Ade Advanced Optics RD3-006A Green Dot Reflex Sight for Handgun
Asin: B071ZW79QJ | Model: rd3-006A | PartNumber: rd3-006A | Ean: 0640978348645 | UPC: 640978348645
However The Front Switch Of The Sight Needs To Trim Down 2Mm Depends On Exact Pistol Model If The Pistol's Pre-Cut Is Very Short...
Ade Rd3 006,Rd3 009,Rd3 012,Rd3 013,Rd3 015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight..
Comes With An Removable Picatinny Mounting Base To Attach To Any Thing With Piatinny Rail. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery.
This Huracan Green Dot Sight Fits Directly To Optics Ready Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided Mount Marked For Doctor/Venom Type Red Dot..
Features
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
- However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short..
- Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
- ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 pounds
See On Amazon #8
Ade Advanced Optics RD3-018-SC Spike Red Dot Sight for Springfield Hellcat (OSP/PRO), P365XL Spectre Comp and Canik TP9 Elite SC
Asin: B08JZJ7K1K
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 Pounds
See On Amazon #9
Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight for Springfield XD Pistol
Asin: B07T99R46D
Designed To Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint. Please Note: Some Aftermarket Slides Have A Precise Optic Cut Based On The Curved Edge/Corner Of Vortex Venom, One Of The Common Slide Manufacturers Is Psa Dagger(With Doctor Cut). Ade And Other Brand Red Dots Do Not Have The Same Curve As Vortex Venom, Therefore This Ade Rd3-009 Red Dot Does Not Fit The Aftermarket Slide With Curved Vortex Venom Optic Cut..
Dimension: 1.9" Length X1.1" Width X1.0" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Motion Awake Technology. 6 Moa. Powered By A Lithium Cr2032 Battery. Comes With Lens Cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws For Conneting Picactinny Plate, Allen Wrench, Tool, Battery Opener Coin, Battery..
This Is Ade's Entry Level Red Dot Origianlly Released In 2014. Over The Years Of Improvement, It Is One Of Best Budget Red Dot For The Quality At This Price Range. We Have Made It More Durable To Withstand Recoil And Improved The Ability To Hold Zero. Designed In Oregon. Starting Jan 2024, This Red Dot Is Shipped With Motion Awake Technology..
Features
- Comes with aftermarket mounting plate for Springfield XD, XDM,XDS and also a standard picatinny mount. Does NOT fits any OSP version of the XD/XDM/XDS that is Optic Ready with a optic cut. The aftermarket mounting plate is made to REPLACE the rear sight.
- This is ADE's entry level red dot origianlly released in 2014. Over the years of improvement, it is one of best budget red dot for the quality at this price range. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon. Starting Jan 2024, this red dot is shipped with Motion Awake Technology.
- Designed to fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore this ADE RD3-009 red dot does NOT fit the aftermarket slide with CURVED vortex venom optic cut.
- Motion Awake Technology. 6 MOA. Powered by a lithium CR2032 battery. Comes with Lens cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws for conneting Picactinny Plate, Allen Wrench, tool, Battery Opener Coin, Battery.
- Dimension: 1.9 length x1.1 width x1.0 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.60 pounds
See On Amazon #10
Picatinny Rail Optic Mount plate for Glock G17 19 22 23 26 27 34 -Work with All railed red dot such as Vortex Venom, Trijicon RMR,with builtin screw hole for Leupold Delta Point Pro,Swampfox Sentinel
Asin: B09YBXYNL8 | Model: PicatinnyD1 | PartNumber: PicatinnyD1
This Optic Dovetail Plate Made By Ade Only Fits Genuine/Standard Glock That Has A Standard Factory Rear Sight. It Does Not For Mos(Optics Ready) Glock. It Does Not Fit Glock With Aftermarket Slide..
This Picatinny Rail Plate Also Have Two Built-In Screw Hole For Red Dot With Shield Rms/Rmsc Footprint And Holosun 407K/507K Footprint To Fit Directly On The Plate Without Needing A Picatinny Plate. Red Dots Sharing These Footprint Such As Shield Rmsc, Trijicon Rmr And Deltapoint Pro Have The Choices To Mount Directly On This Picatinny Rail, Or Using A Picatinny Plate(Sold Separately)..
This Picatinny Mount Provides 2 Rail Slots. Any Red Dot Optic That Equipped With A Picatinny Plate, Is Able To Attach To This Picatinny Rail Mount On A Glock Pistol. Some Red Dots Such As Vortex Venom, Burris Fastfire And Ade Rd3 Come With A Picatinny Mount With The Red Dot Purchase, User Can Use The Red Dot Provided Picatinny Mount To Attach To This Picatinny Rail Mount Right Away. Please Note: Some Red Dots Such As Holosun, Trijicon Rmr Do Not Come With The Picatinny Plate, User Need To Buy..
This Picatinny Plate For Glock Pistol Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications..
Features
- This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play . We recommend having a qualified gunsmith to install
- This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
- This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide.
- This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.
- This picatinny rail plate also have two built-in screw hole for red dot with Shield RMS/RMSc footprint and holosun 407k/507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny plate(sold separately).
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #11
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Vortex Venom/Viper Red Dot Sights
Asin: B08L5K1MWC
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #12
Ade Advanced Optics NUWA (RD3-021) Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT/Mete MC9, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO
Asin: B09N52C1L5
Ade Nuwa Is The First(And The Only)Red Dot With Rms/Rmsc Footprint That Has Top Battery Loading System, No Need To Remove The Sight To Change The Battery That Requires Re-Sight In And Waste Ammo. Battery Life Approximately 500-800 Depends On The Brightness Setting. 2Moa Red Dot. Weight Approximately 15.5 Grames(0.55Oz), (Length)1.5" X (Width)..88" X (Height).89".
Ade Nuwa Is Manual Activated By Pressing The On/Off Switch. Press And Hold Switch For 2 Seconds To Turn On/Off, Quick Press To Adjust The Brightness From Low To High..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Nuwa Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Nuwa's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5 x (Width)..88 x (Height).89
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- ADE Nuwa is manual activated by pressing the on/off switch. Press and Hold switch for 2 seconds to turn on/off, quick press to adjust the brightness from low to high.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 Pounds
See On Amazon #13
Ade Advanced Optics Spike (RD3-018) Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO
Asin: B08JZFNKR8
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 pounds
See On Amazon #14
ADE Picatinny Mounting Plate/Adapter/Mount -Compatible with Shield RMS/RMSc/RMSw/SMS,Sig Sauer Romeo Zero, ADE RD3-018 Spike, Nuwa/Apollo, Vortex Defender-CCW,Bushnell RXC-200 Ultra-Compact Red dot.
Asin: B09BDFRS5V | Ean: 0640978407786 | UPC: 640978407786
Designed To Use On Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-030 Apollo, Shield Rms/Rmsc/Rmsw/Sms And Romeo Zero Red Dot Sights..
Does Not Compatible With Holosun 407K/507K, User Must Grind(Lots Of Grinding) To Completely Remove/Flat Out The Two Rear Pin To Fit 407K/507K. Ade Has Is Releasing A New Plate Made Specifically For 407K/507K, Please Search Amazon Item Number/Asin: B09tmpghrl.
Also Compatible With Leupold Delta Point Pro, Jp Enterprises Jpoint And Swampfox Sentinel, Vortex Defender-Ccw, Bushnell Rxc-200 Ultra-Compact Red Dot Sights. Finished In A Matte Black Anodize. Comes With Two Screws.
This Optic Picatinny Mount Made By Ade Is To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR
- This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMS/RMSc/RMSw/SMS and Romeo Zero Red dot sights.
- Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws
- Does NOT compatible with Holosun 407k/507k, user MUST grind(lots of grinding) to completely REMOVE/Flat out the two rear pin to fit 407k/507k. Ade has is releasing a new plate made specifically for 407k/507k, please search amazon item number/Asin: B09TMPGHRL
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #15
ADE's Extra Elevation Range Shim for Docter, Meopta, MAKdot 1x25, Vortex Venom, Vortex Viper/Venom, Primary Arms SLX RS-10, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015, RD3-028 Red dot Sight
Asin: B07Y3THRGL
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015. The Center Two Screw Holes Might Be 1 Or 2Mm Off For Some Red Dots, If So, Simply Trim Cut The Hole Bigger. Does Not Fit Trijicon Rmr, Shield, Sig Romeo, Holosun Red Dots.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015.
Fits: Burris Fastfire Ii, Iii, Docter Red Dot Sight & Insight Mrds.
Features
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- Fits: Burris Fastfire II, III, Docter Red Dot Sight & Insight MRDS
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #16
ADE Optics Delrin Shims to give Extra Elevation Range for Vortex Venom/Viper, Burris Fastfire, Hex Dragonfly, Sightmark Mini Shot M-Spec/Pro Spec, Leica Tempus, Noblex Sight Red dot Sight
Asin: B07Y3WT9ZC
Fits: Vortex Venom & Viper, Burris Fastfire Ii, Iii, Docter Red Dot Sight, Insight, Eotech Mrds, Sightmark Minishot, Meopta. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015. The Center Two Screw Holes Might Be 1 Or 2Mm Off For Some Red Dots, If So, Simply Trim Cut The Hole Bigger. Does Not Fit Trijicon Rmr, Shield, Sig Romeo, Holosun Red Dots.
Do Not Return Your "Defective" Red Dot That Can't Adjust The Illuminated Dot High Enough To Zero. This Optic Shim Solves The Problem By Raising The Red Dot Higher To Zero..
Features
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.
- Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.09 pounds
See On Amazon #17
Ade Advanced Optics Red Dot Adapter/Mount for Sig Sauer P320 M17 / M18 to Mount Vortex Venom/Viper red dot Sight.
Asin: B091BHB5XD
This Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx..
This Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Ishot And Similar Red Dots.Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Min.
It Also Fits Xcarry Only If It Has A Loaded Chamber Indicator. Some Xcarry Does Not Has A Loaded Chamber Indicator, Then This Plate Does Not Fit It. Inspect Your Xcarry Fully Before Purchasing..
Features
- This brand new designed optic mounting plate is designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- It also fits XCarry ONLY IF it has a loaded chamber indicator. Some XCarry does not has a loaded chamber indicator, then this plate does NOT fit it. Inspect your XCarry fully before purchasing.
- This plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. ishot and similar red dots.Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Min
- This optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 pounds
See On Amazon #18
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN4QYK1
5 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install. Comes with a ADE RD3-009 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- 5 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.60 pounds
See On Amazon #19
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol
Asin: B087H5GHCR
Fit Ade Rd3-006A(Huracan), Rd3-006B(Cobra), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot..
Hiring A Gunsmith Is Highly Recommended, Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury. Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Instsallation. Including Two Align Pins To Attach To Any Of The Four Corner Holes To Prevent Any Movement..
There Are Two Parts Of This Plate. This Small Dovetail Insert Plate Basically Replaces The Rear Sight Using Two Jam Screws. The Big Plate Uses Two Silver Alignment Pins At 2 Of The 4 Corner Holes For The Optic To Sit In..
It Is Design To For Springfield Non-Osp(Non Optics Ready) Xd/Xds/Xdm Pistols That Do Not Has A Optic Cut. This Plate Is For Replacing Rear Sight. It Also Fits Non-Osp Hellcat. It Does Not Fit 5.25″ Xdm Competition Series. This New Plate Is An Re-Designed Version To Replace The Old E1/E2 Plate For Springfield Xd That Always Need Modification Caused By Incorrect Dovetail Size..
Features
- New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25 XDM competition series)
- It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
- Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
- There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
- Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.05 pounds
See On Amazon #20
Ade Advanced Optics RD3-006 Green Dot Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN2YZXX
This Green Dot Comes With A Picatinny Mounting Plate Pre-Assembled (Might Be Packaged Separately In The Retail Package, Depends On The Ade Model). Please Use The Allen Wrench Provided To Take Out The 2 Hex Screws(M3x6mm) On The Top Behind The Glass Frame. It Will Disconnect The Red Dot From The Picatinny Mounting Plate. You Will Then Be Able To Attach The Red Dot To A Variety Of Handgun Mounting Plates.
4 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates
- 4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.00 Pounds
See On Amazon #21
ADE Optic Mounting Plate for Ruger 57 Pistol - Compatible with Trijicon RMR/SRO, RD3-019 Stingray, RD3-022 Artemis,RD3-019 Stingray,RD3-020 Raptor,RD3-023 Valkyrie,Holosun 407C,507C,508T Red Dot Sight
Asin: B0C7LS7VYC | Model: Ruger 57 plate | PartNumber: Ruger 57 plate
Screws Are Provided For Trijicon, Holosun 407C/507C And Ade. The Provided Screws May Not Work Other Red Dots Listed. If Not, We Recommend Get The Right Size Screws From A Local Hardware Store..
Precision Machined Out Of 6061 Aluminum. Weight .4Oz.40Grain Ammo May Be Necessary For Proper Cycling Due To Heavy Rmr Sights.
The Footprint Of This Plate Is Not Compatible With Other Footprints. This Plate Does Not Fit Other Red Dots Such As Vortex Venom/Viper, Doctor, Burris Fastfire, Shield Rms/Rmsc, Trijicon Rmrcc, Deltapoint Pro, Swapfox Sentinel, Ade Spike, Holosun 407K/507K..
The Plate Is Compatible With Rd3-020 Raptor, Rd3-023 Valkyrie, Rd3-019 Stingray, Trijicon Rmr/Sro, Holosun Hs407c/Hs507c/Hs508t, Riton X3 Tactix Prd, Trijicon Rmr/Sro, Swampox Kingslayer/Liberty/Justice Red Dot Sight And Holosun 407C/507C.
Features
- This plate is for Ruger 57 pistol ONLY, it does not fit any other pistols.
- The plate is compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray, Trijicon RMR/SRO, Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight and Holosun 407C/507C
- Screws are provided for Trijicon, Holosun 407C/507C and ADE. The provided screws may NOT work other red dots listed. If not, we recommend get the right size screws from a local hardware store.
- The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex Venom/Viper, Doctor, Burris Fastfire, Shield RMS/RMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike, Holosun 407k/507k.
- Precision machined out of 6061 aluminum. Weight .4oz.40grain ammo may be necessary for proper cycling due to heavy RMR sights
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #22
Ade Advanced Optics 45 Degree Angled Offset Universal Red-Dot Sight Mount Compatible with Trijicon RMR, Holosun 407C/S507C/508T/407K/507K/ESP, Swampfox Sentinel Red Dot Sight
Asin: B0B3PDR15J | Model: HM8-1 | PartNumber: HM8-1
Compatible With Any Red Dot With Footprint Of With Doctor Footprint, Such As Vortex Venom/Viper, Burris Fastfire, Ade Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Red Dots.
Compatible With Any Red Dot With Footprint Of Shield Rms/Rmsc Footprint, Such As Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel.
Compatible With Any Red Dot With Footprint Of Triijicon Rmr Footprint, Such As Holosun 407C/507C, Ade Rd3-020, Rd3-023. Also Works With Holosun 407K/507K/Esp Red Dots.
The Ade Hm8 Optic Mount Attaches To Either Side Of A Picatinny Rail To Accommodate Left Or Right Handed Shooters..
Features
- The ADE HM8 optic mount allows the user to mount a varieties of Red Dots at a 45 degree angle alongside your primary magnified optic for optimal aiming versatility when the situation gets up close and personal.
- The ADE HM8 optic mount attaches to either side of a Picatinny rail to accommodate left or right handed shooters.
- Compatible with Any red dot with footprint of with Doctor footprint, such as Vortex Venom/Viper, Burris Fastfire, ADE RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 red dots
- Compatible with Any red dot with footprint of Triijicon rmr footprint, such as holosun 407c/507c, ADE RD3-020, RD3-023. Also works with Holosun 407k/507k/ESP red dots
- Compatible with Any red dot with footprint of Shield RMS/RMSc footprint, such as Leopold Deltapoint Pro, Sig Romeo Zero, Hex Wasp, Swampfox Sentinel
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #23
Ade Advanced Optics RD3-006B-2 Green Dot Sight for Handgun - Compatible with Doctor/Venom/Fastfire Footprint Red Dot
Asin: B08FSQ7Y73
This Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
4 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- 4 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #24
Ade Advanced Optics Optic Mount Plate for Ruger SR9, SR9c, SR40, SR40c, and SR45 Pistols
Asin: B07MCYS5JR
Does Not Fit Trijicon Rmr, Rmrcc. Attaches Firmly To Your Firearm For Sure Performance In Tactical Situation.
Comes With 2 Years Warranty By Ade Advanced Optis, An Oregon Based Company Since In 2010.
Made Using The Aircraft Aluminum With Hard Anodizing Coat..
Designed For Ade Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015, Rd3-018, Rd3-021 And Similar Style Mini Red Dot Sight Such As Sightmark Mini Shot, Jpoint, Shield Rms/Rmsc, Sig Romeo Zero, Swampfox Sentinel, Vortex Viper, Vortex Venom, And Burris Fastfire 1234..
Features
- Comes with mounting plate for RUGER SR9, SR9C, SR40C, SR40, SR45 and also a standard picatinny mount. Does NOT fit SR9E or SR22. Does NOT fit Ruger Security 9 which is a completely different pistol.
- Designed for Ade RD3-006, RD3-009, rd3-012, RD3-013, RD3-015, RD3-018, RD3-021 and similar style mini Red dot sight such as Sightmark Mini Shot, JPoint, Shield RMS/RMSc, Sig Romeo ZERO, swampfox sentinel, Vortex Viper, Vortex Venom, and Burris FastFire 1234.
- Does NOT fit Trijicon RMR, RMRcc. Attaches firmly to your firearm for sure performance in tactical situation
- Made using the aircraft aluminum with hard anodizing coat.
- Comes with 2 years warranty by Ade Advanced Optis, an Oregon based company since in 2010
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #25
Ade Advanced Optics HG54R Strobe Laser Sight for Pistol Handgun, Red
Asin: B0716YRB7J | Model: hg54R | PartNumber: hg54R | Ean: 0640978348577 | UPC: 640978348577
Proprietary Mounting Design Provides Two Spring Loaded Pillar To Push To Rail Slot For Rock Solid Zero Movement. Weight: 1.13Oz (Battery Included).Does Not Fits Berreta Due To Extra Wide Trigger Guard..
Controlled By Ambidextrous Switch. It Offers Two Modes: Constant-On And Strobe. This Allows The User To Easily Set Their Mode Based On Personal Need Or Preference.
Operates With One Cr1/3N Batteries(Included). Battery Life: 1 Hours. The Unit Is Quickly And Easily, User-Installed In Moments And Can Be Painlessly Transferred From Firearm To Firearm.
Fit Rail-Equipped Pistols, Rifles And Shotguns. The Laser Sight Fits Onto Virtually Any Firearm With A Modern (M1913 Pica Tinny Or Weaver-Style) Accessory Rail.
Features
- Offers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
- Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail
- Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included).Does NOT fits Berreta due to extra wide trigger guard.
- Operates with one CR1/3N batteries(included). Battery life: 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm
- Controlled by ambidextrous switch. It offers two modes: constant-on and strobe. This allows the user to easily set their mode based on personal need or preference
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.05 pounds
See On Amazon #26
ADE Right Hand Holster for Smith Wesson M&P Shield/SW MP Shield M2.0 with Optic Cut Compatible with Shield RMS,Holosun 508T/507C,Venom Red dot-with Flashlight/Laser Space for Streamlight TLR6 - IWB
Asin: B09KT1XBCQ
The Optic Cut Space Is Compatible With All Major Compact Red Dot Sights On The Market, Such As Shield Rms/Rmsc/Rmsw/Sms, Sig Saure Romeo Zero, Jp Enterprises Jpoint, Swampfox Sentinel, Ade Rd3, Leupold Delta Point Pro, Vortex Venom/Viper, Trijicon Rmr/Sro, Deltapoint Pro, Vector Optics Frenzy..
Fully Covers Trigger And Backside Of Gun, Providing Safety And Protection From Sweat.
Adjustable Cant From -5 To 20 Degrees This Slight Adjustment From -5 To 20 Degrees Will Help Angle Your Holster Perfectly For Apprndix(Aiwb), Strong Side, Behind The Hip Or Cross Draw. Fits 1.5" Width Belt.
Thick .08 Kydex Material That Is Strong, Durable, And Molded Specifically For Your Weapon. Adjustable Retention So You Can Get The Perfect Fit. Package Includes Holster Plus Hex Adjustment Tool..
The Laser/Flashlight Space Is Custom Molded For Streamlight Tlr6 Only, It Does Not Fit Any Other Laser Sight Such As Olight, Streamlight Tlr2. The Holster Might Be Able To Accept Some Other Laser/Flashlight But May Not Be Able To Lock Firmly. We Do Not Recommend Using Any Other Laser/Flashlight With This Ade Holster.
Features
- Designed for Smith and Wesson M&P Shield 9mm/.40 Pistol with Optic Cut space for keeping the red dot installed for every day carry. The holster is also custom and precisely molded for a space for the pistol with Streamlight TLR6 installed under the barrel. Does NOT fit MP9, Does NOT fit EZ
- The laser/flashlight space is custom molded for Streamlight TLR6 ONLY, it does NOT fit any other laser sight such as Olight, Streamlight TLR2. The holster might be able to accept some other laser/flashlight but may NOT be able to lock firmly. We do NOT recommend using any other laser/flashlight with this ADE Holster
- The optic cut space is compatible with all major compact red dot sights on the market, such as Shield RMS/RMSC/RMSW/SMS, Sig Saure Romeo Zero, JP Enterprises JPoint, Swampfox Sentinel, ADE RD3, Leupold Delta Point Pro, Vortex Venom/Viper, Trijicon RMR/SRO, Deltapoint Pro, Vector Optics Frenzy.
- Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon. Adjustable Retention so you can get the perfect fit. Package includes holster plus hex adjustment tool.
- Fully covers trigger and backside of gun, providing safety and protection from sweat
- Adjustable Cant From -5 to 20 Degrees This slight adjustment from -5 to 20 degrees will help angle your holster perfectly for Apprndix(AIWB), Strong Side, Behind The Hip or Cross Draw. Fits 1.5 Width Belt
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #27
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount-Compatible with Leupold Delta Point Pro, JP Enterprises JPoint, Shield RMS Red Dot Sight.
Asin: B09BDH5Z4G
Designed To Use On Ade Rd3-018 Spike, Shield Rms/Rmsc/Rmsw/Sms And Romeo Zero Red Dot Sights..
Finished In A Matte Black Anodize. Comes With Two Screws.
Also Compatible With Leupold Delta Point Pro, Jp Enterprises Jpoint And Swampfox Sentinel Red Dot Sights. Does Not Compatible With Holosun 407K/507K, User Must Grind(Lots Of Grinding) To Completely Remove/Flat Out The Two Rear Pin To Fit 407K/507K. Ade Has Is Releasing A New Plate Made Specifically For 407K/507K In March 2022.
This Optic Picatinny Mount Made By Ade Is To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- Designed to use on ADE RD3-018 SPIKE, Shield RMS/RMSc/RMSw/SMS and Romeo Zero Red dot sights.
- Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel red dot sights. Does NOT compatible with Holosun 407k/507k, user MUST grind(lots of grinding) to completely REMOVE/Flat out the two rear pin to fit 407k/507k. Ade has is releasing a new plate made specifically for 407k/507k in March 2022
- Finished in a Matte Black Anodize. Comes with two screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #28
Ade Advanced Optics Optics Riser/Delrin Elevation Shim to give Extra Adjustment Range for Holosun 407K/507K, Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 Spike Handgun Reflex Red Dot Sight
Asin: B07Y3VV4P8
Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree.
Depending On The Handgun, Some Handguns Need This 1Degree Shim To Give Extra Range Of Elevation Across A Wide Range Of Firearms (Such As The 1911). Should You Feel Any Resistance From The Mechanism Whilst Zeroing The Elevation Please Fit The Shim Between The Sight And The Mount With The Thickest Part At The Rear..
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Fits: Shield Rms/Rmsc/Rmsw/Sms, Ade Rd3-018 Spike, Sig Sauer Romeo Zero, Leupold Delta Point Pro, Jp Enterprises Jpoint, Swampfox Sentinel Red Dot Sight. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
Features
- Optic Shim is made to fit between the red dot and the mounting plate.
- Fits: Shield RMS/RMSC/RMSW/SMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Scope base shims Tolerance +/-.005 Taper 1.0 degree
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #29
Ade Advanced Optics Red Dot Sight Mount Base for Taurus G2C, G2S, G3 Without Factory Steel Sights, PT111 G2, PT140 G2, PT709, PT740 and The TX22 Pistols
Asin: B09BBPDNN6
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 pounds
See On Amazon #30
Ade Advanced Optics SW MP Tactical Mini Dotx Sight Pistol Mount Base for Smith & Wesson M&P
Asin: B01L97399Q | Model: SW MP | PartNumber: SW MP | Ean: 0710500205613 | UPC: 710500205613
This Mounting Plate Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma.
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
This Mounting Plate Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots..
This Mounting Plate Fits Sw Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, Sd9ve,Sd40ve, M&P Shield.
Features
- This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith & Wesson handguns
- This mounting plate fits SW Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield
- This mounting plate does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma
- This mounting plate fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
- Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 pounds
See On Amazon