AfterMokit - Buying Guide
Last Updated: 05/02/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
AfterMokit Mirror Risers Height Extension Adapters for Harley 1994 and Up Rear View Side Mirror Mount Extenders Replacement for 91907-87 Chrome Raise Your Mirror
Asin: B07BWDG8H4 | Model: NBXMT387-001-CD | PartNumber: NBXMT387-001-CD | Ean: 0679042433987 | UPC: 679042433987
Designed For Tall Guy, Allow You To Look In Side View Mirrors And Not See Your Shoulder Or Armpit That Said No More Looking Down At Your Mirrors On The Bike.
Thread Size: (Unf)5/16"-24, Make Sure To Use When You Thread The Mirror Extenders Into The Mirrors.
By Adding The Extenders, You Are Able To See Past Your Shoulders Without Leaning, Save Money Because You Don't Have To Buy New Mirrors.
Chrome Extenders Lift Mirrors Approximately 2In Higher For Your Comfort, They Only Raise The Mirrors Do Not Extend Out Horizontally.
Features
- Package Includes: 2 mirror extenders, fit all harley models 1994 and up (except VRSCF models, XG750A models, and XL1200X models with mirrors mounted below the handlebars)
- Chrome Extenders lift mirrors approximately 2in higher for your comfort, they only raise the mirrors do not extend out horizontally
- Designed for Tall Guy, Allow you to look in side view mirrors and not see your shoulder or armpit that said no more looking down at your mirrors on the bike
- By adding the extenders, You are able to see past your shoulders without leaning, Save money because you don't have to buy new mirrors
- Thread size: (UNF)5/16-24, Make sure to use when you thread the mirror extenders into the mirrors
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.49 x 2.80 x 0.49 inches | Weight: 0.12 pounds
Warranty: Refund or Replacement
See On Amazon #2
AfterMokit Grip Covers for Big Hands Thicken Your Grips Snug Fit over 1.2-1.4 inch Grips on Harley BMW Yamaha Honda Kawasaki Suzuki Triumph Can-Am Spyder 5 inch Long Black Fat Foam
Asin: B07K6XHKXD | Model: NBX-ET006-BK | PartNumber: NBX-ET006-BK | Ean: 0738422096317 | UPC: 738422096317
Forget Your Handlebar Diameter, It's Your Grip Diameter That Matters! They Are 5In Long Match The Distance From The Housing To The Bar End On Most Bikes, Snugly Fit Grips Within 1.2In - 1.4In In Diameter.
If You Don't Lubricate, It Will Get Stuck Half Way And Rip, People Also Use Compressed Air, Hair Spray, Rubbing Alcohol To Help Them Slide On And Wear Gloves Makes Getting Them On Much Easier Than Bare Hands.
How To Apply: Lubricate Inside Of Grip Covers With Diluted Warm Soapy Water And Squeeze Them On Over Standard Grips, Let Them Dry In Place Without Moving Them For At Least 24 Hours, No Grip Can Be Installed And Used Within A Few Hours Safely.
Larger Diameter, May Not Feel Right For Small Hands Especially Wearing Gloves, Once On You Will Take Some Time To Get Used To And You Can Feel The Traction.
Features
- Designed For Large Hands, Fingers overlap a lot on the skinny throttle? Feel pain from the hard rubber stock grip? Try it to add girth and padding by slipping them over your existing standard grips on motorcycle, scooter and ATV
- Larger Diameter, May not feel right for small hands especially wearing gloves, once on you will take some time to get used to and you can feel the traction
- Forget Your Handlebar Diameter, It's your grip diameter that matters! They are 5in long match the distance from the housing to the bar end on most bikes, snugly fit grips within 1.2in - 1.4in in diameter
- How to apply: Lubricate inside of grip covers with diluted warm soapy water and squeeze them on over standard grips, let them dry in place without moving them for at least 24 hours, no grip can be installed and used within a few hours SAFELY
- If you don't lubricate, it will get stuck half way and rip, people also use compressed air, hair spray, rubbing alcohol to help them slide on and wear gloves makes getting them on much easier than bare hands
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.20 x 5.00 x 1.26 Inches | Weight: 0.03 pounds
Warranty: Refund or Replacement
See On Amazon #3
AfterMokit Replacement Frame Sliders with Acetal Pucks for Yamaha YZF-R6 2003-2005 Yamaha YZF-R6S 2006-2009 Carbon
Asin: B07JCQ8YBM | Ean: 0738422095235 | UPC: 738422095235
Each Puck Has A Press Fit Aluminum Bushing To Hold It In Place During Impact To Reduce The Risk Of Being Teared Off.
If Your Fairings Do Not Cover The Engine Mount Position, You Can Install Directly With No Cut. Otherwise Please Remove Your Fairings, Mount The Frame Sliders Onto The Engine Mount Position, Trim The Fairings To Allow The Sliders To Stick Out.
No Body Modifications Required, No Installation Instruction Included.
Frame Sliders Help Protect The Frame, Engine Cases And Fairings To Minimize The Cost Of Cosmetic Repair.
Features
- Aftermarket replacement, Professional installation required
- Frame sliders help protect the frame, engine cases and fairings to minimize the cost of cosmetic repair
- Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of being teared off
- No Body Modifications Required, No installation instruction included
- If your fairings do not cover the engine mount position, you can install directly with No Cut. Otherwise please remove your fairings, mount the frame sliders onto the engine mount position, trim the fairings to allow the sliders to stick out
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.78 x 3.00 x 1.78 Inches | Weight: 0.46 pounds
Warranty: Refund or Replacement
See On Amazon #4
AfterMokit Front Fork Axle Shaft Nut Cover with Single Screw for Harley Road Glide Electra Glide Ultra Limited Dyna V-ROD Sportster Softail Fat Boy Breakout 1.14 inch ID 1.7 inch H Chrome 2 Pack
Asin: B07L5ZLR38 | Model: NBXMT248-006-CD-NEW | PartNumber: NBXMT248-006-CD-NEW | Ean: 0738422099677 | UPC: 738422099677
Kindly Remind: Please Check The Measurement Before Order, You May Have To Modify Both Sides To Fit Your Axle, A Spacer Might Required For Smaller Axle Nut.
Package Includes: 2X Front Axle Nut Caps, 2X Set Screws, 1X Allen Key.
Tips: Use On Screws To Secure The Caps In Place.
Easy To Install, Give The Front Axle A Nice Touch That Said An Improvement Over The Stock Axle Exposed.
Features
- Aftermarket replacement parts conceal your front axle hardware for an exclusive skull look
- Easy to install, Give the front axle a nice touch that said an improvement over the stock axle exposed
- Kindly Remind: Please check the measurement before order, You may have to modify both sides to fit your axle, a spacer might required for smaller axle nut
- Tips: Use on screws to secure the caps in place
- Package Includes: 2x front axle nut caps, 2x set screws, 1x Allen key
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.65 x 1.69 x 1.65 inches | Weight: 0.19 pounds
Warranty: Refund or Replacement
See On Amazon #5
AfterMokit Front Brake Fluid Reservoir Cap Right Caliper Master Cylinder Cover for Harley Davidson Electra Glide Road King Ultra Classic Ultra Limited Street Glide Road Glide Heritage Softail Black
Asin: B07GSN6VPF | Model: NBXMT249-061A-BK | PartNumber: NBXMT249-061A-BK | Ean: 0738422079532 | UPC: 738422079532
Fitment: 2008 And Up Hd Touring Electra Glide Road King Ultra Classic Ultra Limited Street Glide Road Glide, 2015 And Up Heritage Softail 2009-2013, 2019 And Up Trikes.
Warning! Use Only Dot 4 Fluid From Sealed Container - Clean Filler Cap Before Removing.
Please Note: This Is For Right Side Front Brake Fluid Reservoir Rather Than Clutch Side Reservoir. It Does Not Come With Gasket And Warning Decal.
Aftermarket Replacement, No Installation Instruction Included, Simply Replace The Stock One Oem Part #42123-08.
Features
- Your reservoir cap has been exposed to brake fluid too much, it needs to be replaced regularly
- Aftermarket Replacement, No installation instruction included, simply replace the stock one OEM part #42123-08
- Fitment: 2008 and up HD Touring Electra Glide Road King Ultra Classic Ultra Limited Street Glide Road Glide, 2015 and up Heritage Softail 2009-2013, 2019 and up Trikes
- Please Note: This is for right side front brake fluid reservoir rather than clutch side reservoir. It does not come with gasket and warning decal
- Warning! Use only dot 4 fluid from sealed container - clean filler cap before removing
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.70 x 3.00 x 2.00 Inches | Weight: 0.18 pounds
Warranty: Refund or Replacement
See On Amazon #6
AfterMokit Replacement Handlebar Riser Top Clamp for 1993-2014 Electra Glide Ultra Classic Road Glide Road King Sportster Street Glide Ultra Limited Anti Slip for 1 inch Clamping Ape Hangers Black
Asin: B07BWH2LGW | Ean: 0679042434113 | UPC: 679042434113
Package Includes: A Top Clamp, No Hardware Or Riser Bushings Included, Works With Your Stock Risers And Bolts.
Fitment: For Handlebars With 1" Clamping Area On 1993-2014 Flh, Flhtcu, Fltr, Flhr, Flhx, Flhtk, Exclude 2015 And Up Road King And Road Glide Models.
Warning! No Matter How Much It Decreases Movement And Slippage, For Safe Riding, No Yank On Your Taller Bars, Test Riding As Always.
Try This Top Clamp To Help Lock In Your Ape Hangers Since The Oem Wouldn't Cut It As The Bars Would Slip, Simply Secure Allen Head Set Screws To Lock Handlebars Into Place That Will Effectively Decrease Handlebar Slippage.
Features
- Aftermarket replacement, No installation instruction included, Please verify your own measurement of mounting hole center before order
- Try this top clamp to help lock in your ape hangers since the OEM wouldn't cut it as the bars would slip, Simply secure allen head set screws to lock handlebars into place that will effectively decrease handlebar slippage
- Package includes: A top clamp, No hardware or riser bushings included, Works with your stock risers and bolts
- Warning! No matter how much it decreases movement and slippage, For Safe Riding, No Yank On Your Taller Bars, Test riding as always
- Fitment: For handlebars with 1 clamping area on 1993-2014 FLH, FLHTCU, FLTR, FLHR, FLHX, FLHTK, Exclude 2015 and up Road King and Road Glide models
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.82 x 5.00 x 2.16 Inches | Weight: 0.30 pounds
Warranty: Refund or Replacement
See On Amazon #7
AfterMokit Replacement Coffin Side Mirrors for Ducati Honda Kawasaki Suzuki Victory Yamaha with M10x1.25 Single Mounting Hole Chrome Arm Bone Stem and Skeleton Claw on Black Rear View Mirror Assembly
Asin: B07GXFMFGD | Ean: 0738422084598 | UPC: 738422084598
Limited Adjustment, Twist The Mirror Through Wrist Joint For A Fold In Or A Fold Out And Some Tilt, Mirror Arm Is Not Adjustable For Upward Or Downward.
Tips: Apply Red Loctite On Bolts To Secure The Mirrors In Place Otherwise Vibrations Will Loosen Them. Note! Over Tightening Is Never Good.
Package Includes: A Pair Of Rearview Mirrors And Hardware, 2X Metric Clockwise Bolts (Right Hand) And 1X Metric Reverse Bolt (Left Hand) For Japanese And European Bikes, 2X Unf 5/16"-24 Clockwise Bolts (Right Hand) For Harley Davidson.
Universal Fit For Japanese Bikes And European Bikes With Single M10x1.25 Mounting Holes, Mirror Relocation Kit (Not Included) Are Required For Harley Davidson, Please Check The Mounting Clearance Before Order.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation required
- Universal fit for Japanese bikes and European bikes with single M10x1.25 mounting holes, Mirror relocation kit (Not included) are required for Harley Davidson, Please check the mounting clearance before order
- Limited Adjustment, Twist the mirror through wrist joint for a fold in or a fold out and some tilt, Mirror arm is not adjustable for upward or downward
- Package Includes: a pair of rearview mirrors and hardware, 2x metric clockwise bolts (right hand) and 1x metric reverse bolt (left hand) for Japanese and European bikes, 2x UNF 5/16-24 clockwise bolts (right hand) for Harley Davidson
- Tips: apply red loctite on bolts to secure the mirrors in place otherwise vibrations will loosen them. Note! Over Tightening Is Never Good
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.60 x 10.20 x 4.30 Inches
Warranty: Refund or Replacement
See On Amazon #8
AfterMokit Replacement Pillion Passenger Grab Bar Rail for Suzuki Hayabusa GSX1300R 1999 2000 2001 2002 2003 2004 2005 2006 2007 Chrome Rear Handle Rail
Asin: B07G7PC3PL | Model: NBXMT082-CD-ALOGO | PartNumber: NBXMT082-CD-ALOGO | Ean: 0686437254058 | UPC: 686437254058
Features: Hayabusa Logo Etched On, Adjustable Mounting Hole Center 1.8"-2".
Fitment: 1999-2007 Suzuki Hayabusa Gsx1300r.
Fits Great As Long As You Have A Passenger Seat On. If Attempting To Put On With The Rear Cowl You'll Have To Modify The Cowl In Order To Fit.
Nice Accent To Your Busa, Replace Oem Part #46211-24F01-35W(46211-24F00-35W), #46211-24F01-019, #46211-24F01-019.
Features
- Aftermarket replacement, No hardware and installation included, Professional installation required
- Nice accent to your busa, Replace OEM part #46211-24F01-35W(46211-24F00-35W), #46211-24F01-019, #46211-24F01-019
- Features: Hayabusa Logo Etched on, Adjustable mounting hole center 1.8-2
- Fits great as long as you have a passenger seat on. If attempting to put on with the rear cowl you'll have to modify the cowl in order to fit
- Fitment: 1999-2007 Suzuki Hayabusa GSX1300R
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.77 x 13.60 x 7.28 Inches | Weight: 1.80 Pounds
Warranty: Refund or Replacement
See On Amazon #9
AfterMokit Turn Signal Lens Front & Rear Indicator Covers for Yamaha V-Star 250 650 1100 V-Max Road Star Midnight Silverado Royal Star Venture SR400 Virago 250 535 750 1100 3 inch OD Clear 2 Pack
Asin: B07GSJYW4X | Ean: 0738422081153 | UPC: 738422081153
Package Includes: 1 Pairs Of Lenses, Gasket, Seal Ring Or Screw Are Not Included As Your Stock Ones Will Work.
Fitment: 1999-2014 Road Star, 1999-2014 Road Star Silverado, 2001-2002 Road Star Midnight Star, 2003-2007 Road Star Midnight, 2004-2007 Road Star Midnight Silverado, 1999-2001 Royal Star Boulevard, 1999-2013 Royal Star Venture, 2000, 2005-2010 Royal Star Tour Deluxe, 2002-2007 Royal Star Midnight Venture, 2006-2007 Royal Star Midnight Tour Deluxe, 2015-2017 Sr400, 2016-2018 Xv250.
Fitment: 1989-2007 V-Max, 1995-2007 Virago Xv250, 1990-2000 Xv535, 1995-1997 Xv750, 1995-1999 Xv1100, 1998-2005, 2008 V-Star Classic, 1998-2005 V-Star Custom Xvs650, 2006-2010 V-Star 650 Classic/Midnight Custom/Silverado, 2006-2016 V-Star 650 Custom, 2000-2009 V-Star 1100 Classic, 2001-2009 V-Star 1100 Custom, 2003-2009 V-Star 1100 Silverado, 2005-2009 V-Star 1100 Midnight Custom, 2008-2015 V-Star Xv250.
Easy To Mount, The Clear Lenses Will Directly Replace The Stock Ones, We Recommend Amber Front, Amber Or Red Rear Bulbs To Match.
Features
- Aftermarket Replacement for OEM Lens, Double Check The Measurement Before Purchase, they have 3in OD with 2.7in hole center
- Easy To Mount, the clear lenses will directly replace the stock ones, we recommend amber front, amber or red rear bulbs to match
- Package Includes: 1 pairs of lenses, gasket, seal ring or screw are not included as your stock ones will work
- Fitment: 1989-2007 V-Max, 1995-2007 Virago XV250, 1990-2000 XV535, 1995-1997 XV750, 1995-1999 XV1100, 1998-2005, 2008 V-Star Classic, 1998-2005 V-Star Custom XVS650, 2006-2010 V-Star 650 Classic/Midnight Custom/Silverado, 2006-2016 V-Star 650 Custom, 2000-2009 V-Star 1100 Classic, 2001-2009 V-Star 1100 Custom, 2003-2009 V-Star 1100 Silverado, 2005-2009 V-Star 1100 Midnight Custom, 2008-2015 V-Star XV250
- Fitment: 1999-2014 Road Star, 1999-2014 Road Star Silverado, 2001-2002 Road Star Midnight Star, 2003-2007 Road Star Midnight, 2004-2007 Road Star Midnight Silverado, 1999-2001 Royal Star Boulevard, 1999-2013 Royal Star Venture, 2000, 2005-2010 Royal Star Tour Deluxe, 2002-2007 Royal Star Midnight Venture, 2006-2007 Royal Star Midnight Tour Deluxe, 2015-2017 SR400, 2016-2018 XV250
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.93 x 3.00 x 3.00 Inches | Weight: 0.00 pounds
Warranty: Refund or Replacement
See On Amazon #10
AfterMokit Front Fender Risers 3 inch Hole Center Fender to Fork Adapter for FLHR 1993-2013 FLHT 1995-2010 FLHTCU 1993-2013 FLHTK 2010-2013 FLHX 2006-2013 FLTR 1998-2009 with 21 inch Wheel Chrome
Asin: B07BW7J9C4 | Model: NBX-TGHD-H1725-CD | PartNumber: NBX-TGHD-H1725-CD | Ean: 0679042434083 | UPC: 679042434083
Package Includes: A Pair Of Front Fender Risers And Hardware. Mounting Hole Center 3", Please Verify Your Own Measurement Before Order.
Fitment: Electra Glide Classic 1993-2005 2007-2013, Electra Glide Sport 1993-1994, Electra Glide Standard 1995-2010, Electra Glide Ultra Classic 1993-1997 2007-2013, Road Glide 1998-2003 2007-2009, Road Glide Custom 2010-2013, Road Glide Ultra 2011-2013, Road King 1993-2013, Road King Classic 1998-2013, Road King Custom 2004-2007, Street Glide 2006-2013, Tri Glide Ultra Classic 2009-2013, Ultra Classic Tour Glide 1993-1996, Ultra Limited 2010-2013.
Kindly Reminder: Watch For Clearance After Lifting Your Fender, You May Have To Remove The Front Bumper To Prevent Denting Your Fender.
Designed To Rise Your Fender For 13/16" To Accommodate A 21" Wheel, Installed On 2 Hole Mount Wrapped Fender.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation required
- Designed to rise your fender for 13/16 to accommodate a 21 wheel, Installed on 2 hole mount wrapped fender
- Package Includes: A pair of front fender risers and hardware. Mounting hole center 3, please verify your own measurement before order
- Kindly Reminder: Watch for clearance after lifting your fender, you may have to remove the front bumper to prevent denting your fender
- Fitment: Electra Glide Classic 1993-2005 2007-2013, Electra Glide Sport 1993-1994, Electra Glide Standard 1995-2010, Electra Glide Ultra Classic 1993-1997 2007-2013, Road Glide 1998-2003 2007-2009, Road Glide Custom 2010-2013, Road Glide Ultra 2011-2013, Road King 1993-2013, Road King Classic 1998-2013, Road King Custom 2004-2007, Street Glide 2006-2013, Tri Glide Ultra Classic 2009-2013, Ultra Classic Tour Glide 1993-1996, Ultra Limited 2010-2013
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.51 x 3.62 x 0.75 inches | Weight: 0.21 pounds
Warranty: Refund or Replacement
See On Amazon #11
AfterMokit Shift Peg for Harley Davidson Heel Toe Shifter Road Glide Road King Breakout CVO Dyna Electra Glide Street Glide Fat Boy Forty Eight Heritage Softail Sportster Night Train Chrome 2 Pack
Asin: B07GSKRD32 | Ean: 0738422072755 | UPC: 738422072755
Fitment: All Shift Levers Of Hd 1984-2016 (Except Vrsc 2006-Later With Forward Controls And Xr 2008-2013).
Kindly Remind: Apply On Bolts Thread To Secure It In Place For A Safe Riding.
Package Includes: A Pair Of Shift Pegs With Pan Head Allen Bolts For Front And Rear Shifter.
Thread Size(Unf): 5/16”-24, Length Of Bolt: 2 3/4 Inch, Please Verify The Measurement Before Purchase.
Features
- Aftermarket Replacement, No installation instruction included, simply replace your stock shifter pegs HD#34611-65T
- Thread Size(UNF): 5/16 -24, Length of bolt: 2 3/4 inch, please verify the measurement before purchase
- Fitment: All shift levers of HD 1984-2016 (except VRSC 2006-later with forward controls and XR 2008-2013)
- Package Includes: A pair of shift pegs with pan head allen bolts for front and rear shifter
- Kindly Remind: Apply on bolts thread to secure it in place for a safe riding
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.00 x 2.37 x 1.00 Inches | Weight: 0.19 pounds
Warranty: Refund or Replacement
See On Amazon #12
AfterMokit Dual Triangle Spike Air Cleaner Intake with Red Filter for Suzuki Boulevard M109R VZR1800 Intruder M1800R Chrome
Asin: B0796QS2TN | Ean: 0769526893748 | UPC: 769526893748
Things You Should Know: The Base Intake Plate Is Supported By Factory Mounting Tab On Your Bike, Mount The Male Fitting Into The Female Part Of The Tab.
Having Trouble On Installing? Just Leave All The Mounting Bolts A Little Loose Until You Can Get Them All In. Remember That The Support Rods Are Not The Same Length Will Have To Be Test-Mounted And Flipped On Left Side.
And: One Side Of The Support Rod Is Mounted To An Existing Hole In The Cylinder Where The Stock Intake Is Bolted To, Use The Stock Bolt To Secure It With The Spacer; The Other Side Is Mounted On The Base Intake Plate, Use The Supplied Longer Bolt And Nut.
Slight Modification May Required Depend On The Year Of Your M109r, Washable Filters Can Be Cleaned With The K&N Recharge Kit.
Features
- Aftermarket Replacement, Professional installation required, No installation instruction included
- Slight modification may required depend on the year of your M109R, Washable filters can be cleaned with the K&N recharge kit
- Things You Should Know: The base intake plate is supported by factory mounting tab on your bike, mount the male fitting into the female part of the tab
- And: One side of the support rod is mounted to an existing hole in the cylinder where the stock intake is bolted to, use the stock bolt to secure it with the spacer; The other side is mounted on the base intake plate, use the supplied longer bolt and nut
- Having Trouble on Installing? Just leave all the mounting bolts a little loose until you can get them all in. Remember that the support rods are not the same length will have to be test-mounted and flipped on left side
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 5.50 x 12.20 x 6.30 Inches | Weight: 3.60 pounds
Warranty: Refund or Replacement
See On Amazon #13
AfterMokit Replacement Universal 7 inch Round Headlight Visor for Cruisers Harley Heritage Softail Honda Shadow Kawasaki Vulcan Suzuki Boulevard C50 C90 Yamaha Royal Star V-Star Chrome
Asin: B07GX9QZ49 | Ean: 0738422088206 | UPC: 738422088206
Tips: Some Fitting Is Required For Smaller Headlamps, Something Round And Sturdy About 5" In Diameter To Roll It On Helps To Get The Fit Right, Not Roll Too Small. Way Better To Use 3M Tape Or Silicone To Secure It In Place.
Does Not Fit Models Equipped With Headlamp Trim Ring Kits Part Numbers 69626-99, 69627-99, 69733-05, And 69734-05. Road King Require Separate Purchase Of Headlamp Mounting Kit 67761-96.
For Harley-Davidson: Fits 7" Round Headlamp, Replace Oem Part #67752-77T (Except 2018 And Up Softail And 2014 And Up Flht, Flhtcul, Flhtcutg, Flhtk, Flhtkl, Flhtkse, Flhx, Flhxs, Flhxse, Flthcu, Fltru, Fltrx, Fltrxs, Fltrxse).
Fitment: All Models With 7" Round Headlamp Just Slip It Under The Headlight Trim Retainer Ring , Go Ahead Give Your Bike A Classic Cruiser Look.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation required
- Fitment: All models with 7 round headlamp just slip it under the headlight trim retainer ring , Go ahead give your bike a classic cruiser look
- Tips: Some fitting is required for smaller headlamps, something round and sturdy about 5 in diameter to roll it on helps to get the fit right, Not roll too small. Way better to use 3M tape or silicone to secure it in place
- For Harley-Davidson: Fits 7 round headlamp, Replace OEM part #67752-77T (except 2018 and up Softail and 2014 and up FLHT, FLHTCUL, FLHTCUTG, FLHTK, FLHTKL, FLHTKSE, FLHX, FLHXS, FLHXSE, FLTHCU, FLTRU, FLTRX, FLTRXS, FLTRXSE)
- Does not fit models equipped with headlamp trim ring kits part numbers 69626-99, 69627-99, 69733-05, and 69734-05. Road King require separate purchase of headlamp mounting kit 67761-96
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 2.56 x 8.27 x 2.79 Inches | Weight: 0.18 pounds
Warranty: Refund or Replacement
See On Amazon #14
AfterMokit Replacement Fuel Tank Pipe Joint for Yamaha Rhino 660 Hunter Hardwoods HD CAMO YXR66 YXR660 2004-2007
Asin: B08HWVF5VV
Package Includes: A Fuel Pipe Joint, No Hardware Included.
Fitment: Yamaha Rhino 660 4Wd Ducks Hunter Hardwoods Hd Camo 2006-2007.
Fitment: Yamaha Rhino 660 Hunter Hardwoods Camo 2004-2005.
Replace The Oem Part #5Ug-24461-00-00, #5Ug-F4300-10-00(5Ug-F4300-00-00).
Features
- Aftermarket replacement, No installation instruction included, Professional installation required
- Replace the OEM part #5UG-24461-00-00, #5UG-F4300-10-00(5UG-F4300-00-00)
- Package Includes: A fuel pipe joint, No hardware included
- Fitment: Yamaha Rhino 660 Hunter Hardwoods CAMO 2004-2005
- Fitment: Yamaha Rhino 660 4WD Ducks Hunter Hardwoods HD CAMO 2006-2007
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Warranty: Refund or Replacement
See On Amazon #15
AfterMokit Replacement Passenger Backrest with Luggage Rack for Dyna models 2006-2017 Except Switchback Fat Bob CVO Fat Bob and 2010-2017 Wide Glide Black Detachable Upright Sissy Bar
Asin: B07K6ZB1RN | Model: NBX-TGHD-SBB023-BK | PartNumber: NBX-TGHD-SBB023-BK | Ean: 0738422096454 | UPC: 738422096454
Fitment: 2006-2017 Dyna Models (Except Switchback, Fat Bob, Cvo Fat Bob And 2010-2017 Wide Glide). 2013-2017 Street Bob And 2016-2017 Low Rider S Equipped With A Side Mount License Plate Require Relocation Kit Part #67900130.
Fitment: 2013-2017 Street Bob And 2016-2017 Low Rider S Hdi/India Configuration Require Turn Signal Relocation Kit Part #67800499. Not For Use With Led Rear Turn Signal Kit Part #67800055A Or 67800056A.
Package Includes: 1X Passenger Backrest Assembly, 1X Luggage Rack, 1X Pad. No Docking Hardware Included.
Features
- Aftermarket replacement, No installation instruction included, Professional installation required
- Package Includes: 1x passenger backrest assembly, 1x luggage rack, 1x pad. No docking hardware included
- Fitment: 2006-2017 Dyna models (Except Switchback, Fat Bob, CVO Fat Bob and 2010-2017 Wide Glide). 2013-2017 Street Bob and 2016-2017 Low Rider S equipped with a side mount license plate require relocation kit part #67900130
- Fitment: 2013-2017 Street Bob and 2016-2017 Low Rider S HDI/India configuration require turn signal relocation kit part #67800499. Not for use with LED rear turn signal kit part #67800055A or 67800056A
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 20.00 x 11.80 x 10.20 inches | Weight: 9.35 pounds
Warranty: Refund or Replacement
See On Amazon #16
AfterMokit Replacement 1 1/8 inch Handlebar Riser Extension Upward & Backward Mount Extender Clamps for KTM 690 Duke Enduro R SMC R 1050 1090 1190 Adventure 1290 Super Adventure Super Duke Silver
Asin: B08LPQ7VXM | Model: NBX-KTM-030ADVGT1050-SR | PartNumber: NBX-KTM-030ADVGT1050-SR
Product Includes: A Pair Of 1 1/8 Inch Clamps And Hardware Fits Perfectly With Existing Saddle, You Need To Use Stock Top Clamps And Bolts.
Fitment: Compatible With 1 1/8" (28.5Mm) Handlebar On Ktm 690 Duke 690 Enduro R 690 Smc R 1050 Adventure 1090 Adventure 1190 Adventure 1290 Super Adventure 1290 Super Duke R.
Save You The Cost & Hassle Of Replacing The Handle Bar To Get The Height You Are Looking For.
Position Adjustment: 30Mm Upward, 20Mm Backward Or Forward That Will Improve Fatigue And Get You More Comfortable On Long Rides.
Features
- Aftermarket Replacement, No installation instruction included, Raise your handle bar with ease
- Position Adjustment: 30mm upward, 20mm backward or forward that will improve fatigue and get you more comfortable on long rides
- Product Includes: A pair of 1 1/8 inch clamps and hardware fits perfectly with existing saddle, you need to use stock top clamps and bolts
- Save you the cost & hassle of replacing the handle bar to get the height you are looking for
- Fitment: Compatible with 1 1/8 (28.5mm) handlebar on KTM 690 Duke 690 Enduro R 690 SMC R 1050 Adventure 1090 Adventure 1190 Adventure 1290 Super Adventure 1290 Super Duke R
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Weight: 0.25 pounds
Warranty: Refund or Replacement
See On Amazon #17
AfterMokit Replacement Side Mirrors for Suzuki Hayabusa 1999-2019 GSX1300R 2001-2002 GSX-R1000 2000-2003 GSX-R750 2001-2003 GSX-R600 Black Rear View Mirror Assembly
Asin: B07GXFD5XD | Ean: 0738422084420 | UPC: 738422084420
Package Includes: A Pair Of Rearview Mirrors With Rubber Shims.
Fitment: Gsx1300r Hayabusa 1999-2019.
Hardware Is Not Included, Please Use Your Stock Ones.
Replace Oem Part #56500-24F20,56600-24F20.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation required
- Replace OEM part #56500-24F20,56600-24F20
- Package Includes: A pair of rearview mirrors with rubber shims
- Hardware is not included, please use your stock ones
- Fitment: GSX1300R Hayabusa 1999-2019
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 3.90 x 5.50 x 3.10 Inches | Weight: 0.73 pounds
Warranty: Refund or Replacement
See On Amazon #18
AfterMokit Replacement Frame Sliders with Acetal Pucks for Suzuki GSXR 600 750 2006 2007 2008 Carbon
Asin: B07JCKWJJD | Ean: 0738422095259 | UPC: 738422095259
Each Puck Has A Press Fit Aluminum Bushing To Hold It In Place During Impact To Reduce The Risk Of Being Teared Off.
If Your Fairings Do Not Cover The Engine Mount Position, You Can Install Directly With No Cut. Otherwise Please Remove Your Fairings, Mount The Frame Sliders Onto The Engine Mount Position, Trim The Fairings To Allow The Sliders To Stick Out.
No Body Modifications Required, No Installation Instruction Included.
Frame Sliders Help Protect The Frame, Engine Cases And Fairings To Minimize The Cost Of Cosmetic Repair.
Features
- Aftermarket replacement, Professional installation required
- Frame sliders help protect the frame, engine cases and fairings to minimize the cost of cosmetic repair
- Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of being teared off
- No Body Modifications Required, No installation instruction included
- If your fairings do not cover the engine mount position, you can install directly with No Cut. Otherwise please remove your fairings, mount the frame sliders onto the engine mount position, trim the fairings to allow the sliders to stick out
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.75 x 3.00 x 1.75 Inches | Weight: 0.19 pounds
Warranty: Refund or Replacement
See On Amazon #19
AfterMokit Tail Lamp Collar with Skull Cover for Harley Davidson Fat Boy 1990 and Up Road King 1994-2008 Road Glide Street Glide 2006-2009 Electra Glide 2009 and Up Ultra Limited 2010 and Up Chrome
Asin: B07GXF1CYP | Ean: 0738422084321 | UPC: 738422084321
Hole Center: 4.9", Bolt Size: Metric M4x0.8X74mm, Replace Oem Part #68311-01, #68332-08.
Fitment: 2006-2009 Flhx, Fltr, Flhtcutg, 2009 And Up Flhr, Flhrc, Flht, Flhtc, Flhtcu, Flhtcutg, Flhtk, Fltru Models With Original Equipment Tail Lamp. Also Fits Touring Models Equipped With Bullet Turn Signal And License Plate Relocation Kit Part #53702-04A.
Fitment: 1996-2008 Harley Dyna, Electra Glide, Fat Boy, Low Rider, Night Train, Road Glide, Road King, Softail, Sportster, Street Glide (Except 2009 And Up Flhx, Flstn, Flsts, 2009 And Up Fxdb, Fxdwg, Fxstd, Xl883n, Xl1200n, Xl1200v, Xl1200x, 2011 And Up Xl1200c, V-Rod).
This Chrome-Plated Abs Taillight Collar Dramatically Dress Up That Lackluster Rear Fender.
Features
- Aftermarket Replacement, No installation instruction included
- This chrome-plated ABS taillight collar dramatically dress up that lackluster rear fender
- Hole center: 4.9, Bolt size: Metric M4x0.8x74mm, Replace OEM part #68311-01, #68332-08
- Fitment: 1996-2008 Harley Dyna, Electra Glide, Fat Boy, Low Rider, Night Train, Road Glide, Road King, Softail, Sportster, Street Glide (Except 2009 and up FLHX, FLSTN, FLSTS, 2009 and up FXDB, FXDWG, FXSTD, XL883N, XL1200N, XL1200V, XL1200X, 2011 and up XL1200C, V-Rod)
- Fitment: 2006-2009 FLHX, FLTR, FLHTCUTG, 2009 and up FLHR, FLHRC, FLHT, FLHTC, FLHTCU, FLHTCUTG, FLHTK, FLTRU models with original equipment tail lamp. Also fits Touring models equipped with Bullet Turn Signal and License Plate Relocation Kit Part #53702-04A
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 3.30 x 5.30 x 3.35 inches | Weight: 0.19 pounds
Warranty: Refund or Replacement
See On Amazon #20
AfterMokit Replacement Front Footpegs for Kawasaki Concours NINJA 250R 300 600R 650R 750R 1000 ZX-6R ZX-7R ZX-9R ZX-10R ZX-11 ZX-12R ZX-14R Versys Vulcan 88 500 Mean Streak Suzuki Boulevard M95 Chrome
Asin: B07GJDWRM6 | Ean: 0686437249818 | UPC: 686437249818
Foot Pegs Are Adjustable For Position As Needed By Turning The Adapters Forward Or Backward.
Fitment: Suzuki Vz1600 Marauder 1600 Boulevard M95 2004 2005.
Fitment: Kawasaki Concours 1986-2006, Concours 14 2008-2020, Ninja 250R 300 600R 650R 750R 1000, Zx-6R Zx-7R Zx-9R Zx-10R Zx-11 Zx-12R Zx-14R, For Versys 650 2007-2020, For Versys 1000 2015-2019, For Versys-X 300 2017-2020, Vulcan 88 1987-1995, Vulcan 500 1990-1996, Mean Streak 2002-2008.
Replace The Stock Front Footpegs, Professional Installation Is Required, Not Used As A Brake Pedal Or Shift Lever.
Features
- Aftermarket replacement foot pegs (left & right sides), No installation instruction included
- Replace the stock front footpegs, Professional installation is required, Not used as a brake pedal or shift lever
- Foot pegs are adjustable for position as needed by turning the adapters forward or backward
- Fitment: Kawasaki Concours 1986-2006, Concours 14 2008-2020, Ninja 250R 300 600R 650R 750R 1000, ZX-6R ZX-7R ZX-9R ZX-10R ZX-11 ZX-12R ZX-14R, for Versys 650 2007-2020, for Versys 1000 2015-2019, for VERSYS-X 300 2017-2020, Vulcan 88 1987-1995, Vulcan 500 1990-1996, Mean Streak 2002-2008
- Fitment: Suzuki VZ1600 Marauder 1600 Boulevard M95 2004 2005
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.50 x 5.30 x 1.50 inches | Weight: 0.55 pounds
Warranty: Refund or Replacement
See On Amazon #21
AfterMokit Spike Fairing Bolts Windshield Screws Windscreen Bolts for Honda CBR600RR 1000RR F3 F4i RR Kawasaki Ninja 250 300 500 ZX6R ZX10R Suzuki GSXR600 750 1000 Yamaha YZF R1 Black 6 Pack
Asin: B08G4PBND1
Package Includes: Spike Windscreen Bolts X 6, Washers X 6, Rubber Nuts X 6.
Size: Metric M5 Threads (5Mm/0.2In), Threaded Shaft Length (17Mm/0.67In), Overall Bolt Length (48Mm/1.88In).
Material: Billet Aluminum, Spike Windscreen Bolts In Black Painting, Tips Are Rounded And Safe Not Pointy Sharp.
Note: Not Designed For Harley, Ducati Or Truck License Plate, You Would Have To Buy Aftermarket Lock Washers And Nuts To Make It Work, Some Modification Might Needed.
Features
- Fitment: Universal fit for all motorcycles with 5mm (0.2in) fairing hole, except for Harley Davidson and Ducati, Hand tighten instead of a wrench is about all you can give them
- Note: Not designed for Harley, Ducati or truck license plate, you would have to buy aftermarket lock washers and nuts to make it work, some modification might needed
- Package includes: Spike windscreen bolts x 6, Washers x 6, Rubber nuts x 6
- Material: Billet aluminum, spike windscreen bolts in black painting, Tips are rounded and safe not pointy sharp
- Size: Metric M5 threads (5mm/0.2in), Threaded shaft length (17mm/0.67in), Overall bolt length (48mm/1.88in)
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.63 x 1.88 x 0.63 Inches | Weight: 0.02 Pounds
Warranty: Refund or Replacement
See On Amazon #22
AfterMokit Replacement Frame Sliders with Acetal Pucks for Suzuki GSX-R600 GSX-R750 2000 2001 2002 2003 2004 2005 Carbon
Asin: B07JVP28NJ | Ean: 0738422094924 | UPC: 738422094924
Each Puck Has A Press Fit Aluminum Bushing To Hold It In Place During Impact To Reduce The Risk Of Being Teared Off.
If Your Fairings Do Not Cover The Engine Mount Position, You Can Install Directly With No Cut. Otherwise Please Remove Your Fairings, Mount The Frame Sliders Onto The Engine Mount Position, Trim The Fairings To Allow The Sliders To Stick Out.
No Body Modifications Required, No Installation Instruction Included.
Frame Sliders Help Protect The Frame, Engine Cases And Fairings To Minimize The Cost Of Cosmetic Repair.
Features
- Aftermarket replacement, Professional installation required
- Frame sliders help protect the frame, engine cases and fairings to minimize the cost of cosmetic repair
- Each puck has a press fit aluminum bushing to hold it in place during impact to reduce the risk of being teared off
- No Body Modifications Required, No installation instruction included
- If your fairings do not cover the engine mount position, you can install directly with No Cut. Otherwise please remove your fairings, mount the frame sliders onto the engine mount position, trim the fairings to allow the sliders to stick out
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.75 x 2.80 x 1.75 Inches | Weight: 0.36 pounds
Warranty: Refund or Replacement
See On Amazon #23
AfterMokit Twin Bullet Air Cleaner Filter for Heritage Softail Springer Softail Fat Boy Dyna Wide Glide Electra Glide Road Glide Road King Street Glide with CV Carb 5.9 inch Mount Hole Center Chrome
Asin: B08B4QHC8J
Product Includes: 1Xair Cleaner Intake, 1X Mounting Bracket, 1X Gasket And Hardware(Bolt Thread Unc 1/2"-13 X 1-1/2" That Mounts Bracket On Carb , You Need Stock Bolts To Twist To Intake).
Fitment: All Softail Models 2007, All Dyna Models With Carburetor/Efi 2004-2007, All Flt Police Models With Carburetor/Efi 2002-2007.
Things You Should Know: Fits Only If Your Cv Carburetor Has 5.9" Mounting Hole Center, Please Check The Measurement Before Order.
Modification May Required Depend On The Year And Model, Washable Filters Can Be Cleaned With The K&N Recharge Kit.
Features
- Aftermarket Replacement, Professional installation required, No installation instruction included
- Modification may required depend on the year and model, Washable filters can be cleaned with the K&N recharge kit
- Product Includes: 1xAir cleaner intake, 1x mounting bracket, 1x gasket and hardware(Bolt thread UNC 1/2-13 x 1-1/2 that mounts bracket on carb , You need stock bolts to twist to intake)
- Things You Should Know: Fits only if your CV Carburetor has 5.9 mounting hole center, please check the measurement before order
- Fitment: All Softail models 2007, All Dyna models with carburetor/EFI 2004-2007, All FLT Police models with carburetor/EFI 2002-2007
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Weight: 6.50 pounds
See On Amazon #24
AfterMokit Replacement Side Mirrors for Yamaha 2006 2007 2008 2009 2010 2012 2013 2014 FZ1 2015 FZS1 FZS10 Black Rear View Mirror Assembly
Asin: B07GXFN13F | Ean: 0738422084499 | UPC: 738422084499
Package Includes: A Pair Of Rearview Mirrors.
Fitment: 2006-2014 Yamaha Fz1, 2015 Fzs1.
Nuts And Spacers Are Not Included, Please Use Your Own Hardware.
Replace Oem Part #3C3-26280-00-00, #3C3-26290-00-00, #3C3-26280-10-00, #3C3-26290-10-00.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation required
- Replace OEM part #3C3-26280-00-00, #3C3-26290-00-00, #3C3-26280-10-00, #3C3-26290-10-00
- Package Includes: A pair of rearview mirrors
- Nuts and spacers are not included, please use your own hardware
- Fitment: 2006-2014 Yamaha FZ1, 2015 FZS1
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 3.58 x 5.83 x 2.56 Inches | Weight: 0.86 pounds
Warranty: Refund or Replacement
See On Amazon #25
AfterMokit Side Stand Extension Pad Kickstand Enlarger Plate for Ducati Scrambler 800 2014 and Up Sixty2 2016 and Up Gray
Asin: B07FFPHGW7 | Ean: 0679042443153 | UPC: 679042443153
Mount With Ease, Once On Your Bike Won't Sink Into The Sand Any More.
Fitment: Scrambler Ducati 800 2014 And Up, Scrambler Ducati Sixty2 2016 And Up.
Tips: 1. Put The 3M Tape Onto The Bottom Of Kickstand, 2. Apply A Dab Of Glue To The Screws Is Recommended.
It Will Fit On Existing Kickstand, Please Verify The Measurement Image Before Purchase.
Features
- The factory kickstand footprint is too small to stand on soft ground, try this pad for a secure parking
- It will fit on existing kickstand, please verify the measurement image before purchase
- Mount With Ease, once on your bike won't sink into the sand any more
- Tips: 1. Put the 3M tape onto the bottom of kickstand, 2. Apply a dab of glue to the screws is recommended
- Fitment: Scrambler Ducati 800 2014 and Up, Scrambler Ducati Sixty2 2016 and Up
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.45 x 4.00 x 3.00 Inches | Weight: 0.26 pounds
Warranty: Refund or Replacement
See On Amazon #26
AfterMokit Steel Manual Tire Changer for 8-16 inch ATV UTV Golf Cart Lawn Mower Tractor Trailer Change Tires at Home Farm Implement Tire Manual Bead Breaker Passenger Tire Manual Bead Buster Red
Asin: B08J3CVY23
Accommodates Open Hub And Bearing Wheels, This Adjustable Bead Breaker Handles Tires From 8" To 16" Light Truck Tires Including Farm And Agricultural Flotation Tires Up To Size 12.5L16.
Keep In Mind: 1. When Breaking Bead, Don't Fully Force Demount Bar Down, Instead Try Several Times Leverage To Protect The Bead Breaker Shoe, 2. You Must Use Soapy Water Or Tire Lube Otherwise It Will Be A Tough Work. 3. Youtube Always Help For New Hand.
Designed For Old Wheels That You Don't Care About Potential Scratches On Them, For New Wheels You Need To Use Some Rubber Sheets To Protect The Rim.
This Manual Tire Changer Requires No Power Hookups Or Pneumatic Lines To Operate, Just Secure It On Concrete Floor Or Ground Through Predrilled Base Before Work.
Features
- Remove worn tires from rims and remount them in an economy way with this simply constructed tire changer, Anchor bolts and installation instructions are not included
- This manual tire changer requires no power hookups or pneumatic lines to operate, just secure it on concrete floor or ground through predrilled base before work
- Accommodates open hub and bearing wheels, this adjustable bead breaker handles tires from 8 to 16 light truck tires including farm and agricultural flotation tires up to size 12.5L16
- Designed for old wheels that you don't care about potential scratches on them, For new wheels you need to use some rubber sheets to protect the rim
- Keep in Mind: 1. When breaking bead, don't fully force demount bar down, instead try several times leverage to protect the bead breaker shoe, 2. You must use soapy water or tire lube otherwise it will be a tough work. 3. Youtube always help for new hand
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.97 x 5.91 x 3.94 Inches | Weight: 34.00 pounds
Warranty: Return or Replacement
See On Amazon #27
AfterMokit Replacement 6mm Thread Universal Side Mirrors for Honda CBR Kawasaki Ninja 650R Suzuki GSXR600 GSXR1000 Hayabusa SV650S Yamaha FZ6 FZ6R R1 R6 Plain Black Rear View Blue Tint Mirrors
Asin: B07BWFMS2F | Ean: 0679042433772 | UPC: 679042433772
They Are Flat Blue Tint Mirrors, May Smaller Than Your Stock Ones, Please Check The Measurement Before Order.
Tips: Apply Red On Bolts To Secure The Mirrors In Place Otherwise Vibrations Will Loosen Them. Note! Over Tightening Is Never Good.
Package Includes: A Pair Of Rearview Mirrors And Rubber Shims, Hardware (Washers Are Not Included), Allen Keys.
Replace The M6 Thread Stock Mirrors, Please Check The Hole Separation On Your Front Fairing Before Order.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation required
- Replace the M6 thread stock mirrors, Please check the hole separation on your front fairing before order
- They are flat blue tint mirrors, May smaller than your stock ones, Please check the measurement before order
- Package Includes: A pair of rearview mirrors and rubber shims, hardware (washers are not included), allen keys
- Tips: apply red on bolts to secure the mirrors in place otherwise vibrations will loosen them. Note! Over Tightening Is Never Good
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 2.30 x 5.00 x 0.90 inches | Weight: 0.63 pounds
Warranty: Refund or Replacement
See On Amazon #28
AfterMokit Replacement Wide Glide Springer Front Ends Handlebar Converter for Wide Glide Handlebar 4.75 to 3.5 inch Hole Center Chrome Springer Top Tree Riser Adapter
Asin: B07FBBVJSP | Ean: 0679042442859 | UPC: 679042442859
Meanwhile This Adapter Lets You Use The Standard Harley Risers Or Handlebars With 3.5" Mounting Hole Center.
Bolts Size: Socket Flat Head Bolts For Mounting On Handlebar Unc (Coarse Thread) 1/2-13X1.16", Hex Bolts For Mounting On Springer Front End Unf (Fine Thread) 1/2-20X1.24".
Package Includes: A Springer Handle Bar Converter And Hardware.
Springers Use A Specific Handlebar Mounting That Limits Your Choice Of Favorite Handlebars, This Converter Is Designed To Allow You To Use Any Wide Glide Handlebar On Springer Front End.
Features
- Aftermarket Replacement, Converts springer front ends hole center from 4.75" to standard 3.5", No installation instruction included
- Springers use a specific handlebar mounting that limits your choice of favorite handlebars, this converter is designed to allow you to use any wide glide handlebar on springer front end
- Meanwhile this adapter lets you use the standard Harley risers or handlebars with 3.5 mounting hole center
- Package Includes: a springer handle bar converter and hardware
- Bolts size: Socket flat head bolts for mounting on handlebar UNC (coarse thread) 1/2-13x1.16, Hex bolts for mounting on springer front end UNF (fine thread) 1/2-20x1.24
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 0.95 x 6.30 x 2.20 inches | Weight: 0.63 Pounds
Warranty: Refund or Replacement
See On Amazon #29
AfterMokit Replacement Frame Sliders with Acetal Pucks for Kawasaki Ninja 650 650R EX650 2009 2010 2011 Black
Asin: B07JC6R8Z9 | Ean: 0738422095891 | UPC: 738422095891
If Your Fairings Do Not Cover The Engine Mount Position, You Can Install Directly With No Cut. Otherwise Please Remove Your Fairings, Mount The Frame Sliders Onto The Engine Mount Position, Trim The Fairings To Allow The Sliders To Stick Out.
How To Mount Brackets: Bolt The Shorter Bracket Onto Clutch Side By Using 2 Bolts(1 Long One Short) And The Longer Spacer While Bolt The Longer Bracket Onto Throttle Side By Using 1 Long Bolt And The Shorter Spacer.
How To Use Hex Bolts: Bolt The Shorter Slider Onto The Thinner Bracket While Bolt The Longer Onto The Thicker.
Frame Sliders Help Protect The Frame, Engine Cases And Fairings To Minimize The Cost Of Cosmetic Repair.
Features
- Aftermarket replacement, Professional installation required, No installation instruction included
- Frame sliders help protect the frame, engine cases and fairings to minimize the cost of cosmetic repair
- If your fairings do not cover the engine mount position, you can install directly with No Cut. Otherwise please remove your fairings, mount the frame sliders onto the engine mount position, trim the fairings to allow the sliders to stick out
- How to use hex bolts: Bolt the shorter slider onto the thinner bracket while bolt the longer onto the thicker
- How to mount brackets: Bolt the shorter bracket onto clutch side by using 2 bolts(1 long one short) and the longer spacer while bolt the longer bracket onto throttle side by using 1 long bolt and the shorter spacer
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 1.71 x 3.94 x 1.71 Inches | Weight: 0.23 pounds
Warranty: Refund or Replacement
See On Amazon #30
AfterMokit Replacement 632 Pieces ATV Bolts Kit for Yamaha Banshee 350 YFZ350 1987-2006 Zinc Coated
Asin: B07FB6313W | Model: NBX-TGHD-BOT-Y-UTV-SR | PartNumber: NBX-TGHD-BOT-Y-UTV-SR | Ean: 0679042442774 | UPC: 679042442774
Package Included: 632 Pcs Of Bolts, Nuts And Washers Labeled In 33 Bags To Where They Go.
Fitment: 1987-2006 Yamaha Banshee 350.
Excludes: The Main Swingarm Bolts, The Upper A-Arm Bolts, The Two Motor Mount Bolts On The Bottom Of The Engine And The Footpeg Bolts.
It’S Time To Rebuild Your Quad, Try These Zinc Plated Steel Bolts For A Restoring Looking.
Features
- Aftermarket Replacement, No installation instruction included, Professional installation is required
- It s time to rebuild your quad, try these zinc plated steel bolts for a restoring looking
- Package Included: 632 pcs of bolts, nuts and washers labeled in 33 bags to where they go
- Excludes: the main swingarm bolts, the upper A-Arm bolts, the two motor mount bolts on the bottom of the engine and the footpeg bolts
- Fitment: 1987-2006 Yamaha Banshee 350
- See more on Amazon...
Brand: AfterMokit | Manufacturer: Xingmoto
Dimensions: 2.00 x 12.00 x 7.00 Inches | Weight: 8.40 pounds
Warranty: Refund or Replacement
See On Amazon