Aimsniper - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Tactical Modular Dual Wire Button Remote Activation Pressure Switch For M300/M600 PEQ15/A2 Etc Series Scout Troch Light Tactical Flashlight For 20mm Rail and M/K Dual System (SF+Crane Laser Plug BK)
Asin: B0CBMGB2M8 | Model: Pressure Switch | PartNumber: Pressure Switch
It Can Be Directly Snapped Onto The 20Mm Rail And M/K Dual System. Tpu Plastic Material, Reinforced Polymer Construction And Anti-Aging, Wear-Resistant And Durable. Lightweight And Safe Performance In Using. Life Waterproof, Don't Worry About Getting Wet Or Raining, But Please Don't Soak The Product Directly In Water..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
When Install On M/K System, You Need To Remove The Mounting Bases On Both Sides Of The Switch First Then Use The Included Screws And Nuts To Install It To The System. Easy Installation，Direct-Mounting The Remote Pressure Switch To 20Mm Rail..
Sf Plug Is Applied To M300/M600 Series Scout Troch Lights And Flashlights And The 2.5/3.5Mm Plug Is Suitable For A2 / Peq15 Etc. The Dual Buttons Remote Pressure Switch With 2 Plugs To Meet More Usage Needs During Activities.
Features
- Remote Dual Pressure Switch Can Simultaneously Control Flashlight & Laser Pointer. 2 Buttons Are Respectively Control The Lights Connected By The 2 Plugs, Both Are Momentary Modes, Only Lights Up When Pressed.
- SF Plug Is Applied To M300/M600 Series Scout Troch Lights And Flashlights And The 2.5/3.5mm Plug Is Suitable For A2 / PEQ15 Etc. The Dual Buttons Remote Pressure Switch With 2 Plugs To Meet More Usage Needs During Activities
- It Can Be Directly Snapped Onto The 20mm Rail And M/K Dual System. TPU Plastic Material, Reinforced Polymer Construction And Anti-Aging, Wear-Resistant And Durable. Lightweight And Safe Performance In Using. Life Waterproof, Don'T Worry About Getting Wet Or Raining, But Please Don'T Soak The Product Directly In Water.
- When Install on M/K System, You Need to Remove the Mounting Bases on Both Sides of the Switch First Then Use the Included Screws and Nuts to Install It to the System. Easy Installation Direct-Mounting the Remote Pressure Switch to 20mm Rail.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Dimensions: 1.18 x 1.18 x 2.36 Inches
Warranty: Lifetime warranty.
See On Amazon #2
Tactical FTC Magnifier Mount with Fast QD Lever 2.26 Optical Centerline Height Quick Release & Flip-to-Center (FTC) Mechanism CNC Aluminum Compatible G30 G23 G33 G43 G45 Mirco 3X Mirco 6X Etc(TAN)
Asin: B0C9WLWK8X
Fast Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.26” Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture..
The Revolutionary Ftc Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). Fast Ftc Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition..
Fast Ftc Magnifier Mounts Feature The First Ever Flip-To-Center (Ftc) Mechanism, Providing Stowage Completely Within The Footprint Of The Receiver While Not Occluding The Host Optic’S Sight Picture At All. This Provides The Most Optic Capability With The Lowest Profile During All Modes Of Operation. A Heads-Up Posture Also Helps Users Maintain A Neutral Spine Position Which Is More Comfortable While Wearing Helmets, Plate Carriers, And Other Heavy Gear..
Fast Ftc Magnifier Mounts Come With Qd Auto-Lock Lever. The Fast Ftc Magnifier Mount Is Built From 6068-T6 Aluminum And Type Iii Hardcoat Anodized Black Or Fde. In The Structural Components That Come Into Contact With The Guide Rail, We Use Steel , Which Ensures The Best Stability And Durability Of The Product. Unlike Others Who Use Aluminum For This Component, Aluminum Tends To Deform After Multiple Assemblies..
Features
- This FAST Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The FAST FTC Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45 Mirco 3X, Mirco 6X Etc.
- FAST FTC Magnifier Mounts Come With QD Auto-Lock Lever. The FAST FTC Magnifier Mount Is Built From 6068-T6 Aluminum And Type III Hardcoat Anodized Black Or FDE. In The Structural Components That Come Into Contact With The Guide Rail, We Use Steel , Which Ensures The Best Stability And Durability Of The Product. Unlike Others Who Use Aluminum For This Component, Aluminum Tends To Deform After Multiple Assemblies.
- FAST Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.26 Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture.
- FAST FTC Magnifier Mounts Feature The First Ever Flip-To-Center (FTC) Mechanism, Providing Stowage Completely Within The Footprint Of The Receiver While Not Occluding The Host Optic S Sight Picture At All. This Provides The Most Optic Capability With The Lowest Profile During All Modes Of Operation. A Heads-Up Posture Also Helps Users Maintain A Neutral Spine Position Which Is More Comfortable While Wearing Helmets, Plate Carriers, And Other Heavy Gear.
- The Revolutionary FTC Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). FAST FTC Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AIMSIPER
Warranty: Lifetime Warranty
See On Amazon #3
Tactical FTC Magnifier Mount With FAST QD Lever 2.91" Optical Centerline Height,Quick Release & Flip-To-Center (FTC) Mechanism,CNC Aluminum,Compatible G30,G23,G33,G43,G45,Mirco 3X,Mirco 6X Etc,BK
Asin: B0CYZCHMVY
Fast Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91” Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture..
The Revolutionary Ftc Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). Fast Ftc Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition..
Fast Ftc Magnifier Mounts Feature The First Ever Flip-To-Center (Ftc) Mechanism, Providing Stowage Completely Within The Footprint Of The Receiver While Not Occluding The Host Optic’S Sight Picture At All. This Provides The Most Optic Capability With The Lowest Profile During All Modes Of Operation. A Heads-Up Posture Also Helps Users Maintain A Neutral Spine Position Which Is More Comfortable While Wearing Helmets, Plate Carriers, And Other Heavy Gear..
Fast Ftc Magnifier Mounts Come With Qd Auto-Lock Lever. The Fast Ftc Magnifier Mount Is Built From 6068-T6 Aluminum And Type Iii Hardcoat Anodized Black Or Fde. In The Structural Components That Come Into Contact With The Guide Rail, We Use Steel , Which Ensures The Best Stability And Durability Of The Product. Unlike Others Who Use Aluminum For This Component, Aluminum Tends To Deform After Multiple Assemblies..
Features
- This FAST Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The FAST FTC Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45 Mirco 3X, Mirco 6X Etc.
- FAST FTC Magnifier Mounts Come With QD Auto-Lock Lever. The FAST FTC Magnifier Mount Is Built From 6068-T6 Aluminum And Type III Hardcoat Anodized Black Or FDE. In The Structural Components That Come Into Contact With The Guide Rail, We Use Steel , Which Ensures The Best Stability And Durability Of The Product. Unlike Others Who Use Aluminum For This Component, Aluminum Tends To Deform After Multiple Assemblies.
- FAST Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91 Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture.
- FAST FTC Magnifier Mounts Feature The First Ever Flip-To-Center (FTC) Mechanism, Providing Stowage Completely Within The Footprint Of The Receiver While Not Occluding The Host Optic S Sight Picture At All. This Provides The Most Optic Capability With The Lowest Profile During All Modes Of Operation. A Heads-Up Posture Also Helps Users Maintain A Neutral Spine Position Which Is More Comfortable While Wearing Helmets, Plate Carriers, And Other Heavy Gear.
- The Revolutionary FTC Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). FAST FTC Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
See On Amazon #4
558 Holographic Sights + 3X Magnifier Combo Airsoft Green&Red dot Sight with 20mm Switch to Side Quick Detachable QD Mount(Black)
Asin: B09Y4FD7S3
【Quick Transitions】-Simple, Fast, And Effective. The Flip-To-Side Picatinny Rail Mount To Allow You To Shoot Either 1X Or 3X Enlarge By Simply Pushing The 3X Magnifier To The Side..
【Package】: 558 Scope + 3X Magnifier Combo Set Out Of The Box, For All 20Mm Picatinny Rails, Lens Wipe, 558 Scope Protection Cover. Any Questions Or Dissatisfaction. Feel Free To Contact Us. Welcome Your Inquiry And Purchase. Will Not Let You Down. Value For Money. If You Are Not Satisfied, This Reflex Sight Is Available For A Full Refund..
【Durable And Compatible】: Rugged And Shockproof, Hard-Coated Anodized Mechanical Aluminum Construction Ensures Durability. Made Of High-Grade Aluminum Alloy,.
【Premium Optical】:Advanced Optical Systems Comprising Both High Definition (Ed) And High Transmittance (Ht) Glass For Ultra-High Resolution, Light Transmission. The Lens Is Fully Multi-Coated To Maximize Resolution Red Dot Has The Largest Dynamic Range Providing For High Brightness In Bright Sunlight,Snow,Night,Cloudy Days Conditions.
Features
- Green/Red Dot 558 holographic scope provides red and green dot switching and 10 levels of brightness adjustment.
- Premium Optical :Advanced optical systems comprising both High Definition (ED) and High Transmittance (HT) glass for ultra-high resolution, light transmission. The lens is fully multi-coated to maximize resolution red dot has the largest dynamic range providing for high brightness in bright sunlight,snow,night,cloudy days conditions
- Quick Transitions -Simple, fast, and effective. The flip-to-side picatinny rail mount to allow you to shoot either 1X or 3X Enlarge by simply pushing the 3x magnifier to the side.
- Durable and Compatible : Rugged and shockproof, hard-coated anodized mechanical aluminum construction ensures durability. Made of high-grade aluminum alloy,
- Package : 558 scope + 3X magnifier combo set out of the box, for all 20mm picatinny rails, lens wipe, 558 scope protection cover. Any questions or dissatisfaction. Feel free to contact us. Welcome your inquiry and purchase. Will not let you down. Value for money. If you are not satisfied, this reflex sight is available for a full refund.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AWESOME
Weight: 1.23 Pounds
See On Amazon #5
558+3X Magnifier Green/Red dot Sight Holographic Reflex Sights with Switch to Side Quick Detachable QD Mount for Hunting(Black)
Asin: B09Y4B2X9K
Durable & Compatible: Tough & Shockproof, The Hard-Coat-Anodized Machined-Aluminum Construction Ensures Durability. Made Of High Grade Aluminum Alloy Which Makes The Red Dot Sight Durable And Light Weight..
558 Red Dot +G43 Magnifier Is Nitrogen Purged For Reliable Waterproof And Fogproof Performance In The Field.Use Lens Cleaning Fluid And Optical Tissue Or Cloth To Clean Lenses.
The Lens Are Fully Multi-Coated Maximizing Resolution, Light Gathering Capability, And Color Fidelity..
Quick Transitions-Simple, Fast, And Effective. The Flip-To-Side Picatinny Rail Mount To Allow You To Shoot Either 1X Or 3X Magnification By Simply Pushing The Magnifier To The Side..
Features
- 558 Red dot sight +g43 Quick-Release Flip Mount Magnifier adds a 3x magnification . Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.
- Quick Transitions-Simple, fast, and effective. The flip-to-side picatinny rail mount to allow you to shoot either 1X or 3X magnification by simply pushing the magnifier to the side.
- Durable & Compatible: Tough & shockproof, the hard-coat-anodized machined-aluminum construction ensures durability. Made of high grade aluminum alloy which makes the red dot sight durable and light weight.
- The lens are fully multi-coated maximizing resolution, light gathering capability, and color fidelity.
- 558 red dot +g43 magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.Use lens cleaning fluid and optical tissue or cloth to clean lenses
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AWESOME
Weight: 1.81 Pounds
See On Amazon #6
G45 5X Magnifier with 2.26 FTC Mount Combo Quick Release and Flip-to-Center (FTC) Mechanism CNC 7065 Alumnium Black/FDE/TAC (TAN Combo)
Asin: B0C9Q8L25D
The Revolutionary Ftc Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side, Creating A Major Snag Hazard). Fast Ftc Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
This Fastmount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit..
Providing Stowage Completely Within The Footprint Of The Host Receiver While Not Occluding The Host Optic’S Sight Picture At All. This Provides The Most Optic Capability With The Lowest Profile During All Modes Of Operation..
Features
- Fast FTC Magnifier Mounts Feature The First Ever Flip-To-Center (FTC) Mechanism Including Full Marking And Base Mount Sets, Made By CNC Tech 7065 Alumnium Made,Hard Anodized Black Sealing Fog Resistant Internal Optics
- Providing Stowage Completely Within The Footprint Of The Host Receiver While Not Occluding The Host Optic S Sight Picture At All. This Provides The Most Optic Capability With The Lowest Profile During All Modes Of Operation.
- The Revolutionary FTC Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side, Creating A Major Snag Hazard). Fast FTC Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition.
- This Fastmount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime warranty.
See On Amazon #7
Aimsniper Risers Scope Mount Hydra Mount Risers for Holographic Sight Night Vision Laser Red Dot Sight Combo Mount Base Adapter Rail 20mm Scope Mount
Asin: B0CCRRH8JL
The Combo Adapter Mount Allows For A More Athletic Posture And “Heads Up” Attitude That Allows The End-Users To Maintain A Vertical Spine Which Translates To Body Armor Or “Presenting Plates” To The Threat. This “Heads Up” Style Allows For Faster Processing Speed And Increased Situational Awareness..
Made Of Aviation Aluminum T6061 Precision Machining, Black Matte Anodic Oxidation Treatment, Sturdy And Durable, Unsatisfied With A Full Refund.
The Unique Design Provides A Mil-Std-1913 Or Picatinny Raised Platform For Direct Mounting Of Accessories Such As Illuminators, Optics And Sighting Devices. It Is Ideal For Ultra-Short Pdw/Smg Platforms Where Rail Space Is Limited But The Need To Mount Illuminators And Lasers Is Still Critical. The Neck Pass-Through Can Be Used For Cable Management Or Iron Sight Pass-Through..
Sturdy, Won't Wobble And Won't Fall Off. Fits Perfectly With Standard 20Mm Picatinny Or Mil-Std-1913 Rails. Tighten Bolts With The Supplied Wrench..
Features
- The tactical optics scope riser mount designed for EXPS3 T1 T2 optic sights with micro footprint. Also provides 6-slot forward extending Picatinny rail mount, suitable for PEQ DBAL-A2 laser sights users that offers a 2.91 Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, ie. EarPro/Comms headsets, Gas masks/ CBRN, and Night vision use.
- Sturdy, won't wobble and won't fall off. Fits perfectly with standard 20mm Picatinny or MIL-STD-1913 rails. Tighten bolts with the supplied wrench.
- The combo adapter mount allows for a more athletic posture and Heads up attitude that allows the end-users to maintain a vertical spine which translates to body armor or presenting plates to the threat. This Heads up style allows for faster processing speed and increased situational awareness.
- The unique design provides a MIL-STD-1913 or Picatinny raised platform for direct mounting of accessories such as illuminators, optics and sighting devices. It is ideal for ultra-short PDW/SMG platforms where rail space is limited but the need to mount illuminators and lasers is still critical. The neck pass-through can be used for cable management or iron sight pass-through.
- Made of aviation aluminum T6061 precision machining, black matte anodic oxidation treatment, sturdy and durable, unsatisfied with a full refund
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AWESOME
Weight: 0.25 pounds
See On Amazon #8
Tactical FTC Magnifier Mount With FAST QD Lever 2.91" Optical Centerline Height Quick Release & Flip-To-Center (FTC) Mechanism CNC Aluminum Compatible G30 G23 G33 G43 G45 Mirco 3X Mirco 6X Etc (DE)
Asin: B0CH2SR2P3
Fast Ftc Magnifier Mounts Come With Qd Auto-Lock Lever. The Fast Ftc Magnifier Mount Is Built From 6068-T6 Aluminum And Type Iii Hardcoat Anodized Black Or Fde. In The Structural Components That Come Into Contact With The Guide Rail, We Use Steel , Which Ensures The Best Stability And Durability Of The Product. Unlike Others Who Use Aluminum For This Component, Aluminum Tends To Deform After Multiple Assemblies..
Fast Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91” Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture..
This Fast Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit，Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The Fast Ftc Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45，Mirco 3X, Mirco 6X Etc..
Features
- This FAST Mount Hangs The Magnifier Compatible With The Following: G30, G23, G33, G43, G45 Mirco 3X, Mirco 6X Etc.
- This FAST Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The FAST FTC Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45 Mirco 3X, Mirco 6X Etc.
- FAST FTC Magnifier Mounts Come With QD Auto-Lock Lever. The FAST FTC Magnifier Mount Is Built From 6068-T6 Aluminum And Type III Hardcoat Anodized Black Or FDE. In The Structural Components That Come Into Contact With The Guide Rail, We Use Steel , Which Ensures The Best Stability And Durability Of The Product. Unlike Others Who Use Aluminum For This Component, Aluminum Tends To Deform After Multiple Assemblies.
- FAST Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91 Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
See On Amazon #9
558 Red Green Dot Sight with G45 5X Magnifier Combo with QD Mount Quick Release Optical Holographic Reflecting Sight 20 Levels Brightness Multi-Coated Lenses Black/FDE/A-TACS (Black Combo)
Asin: B0C9PMCZRT
558 Has 20 Levels Of Brightness Adjustment, Holographic Hybrid Sight-Freely Switch Between Red And Green Dots, Internal Equipped With Low Power Consumption Circuit Board, Greatly Extending The Battery Life, And Uses A Quick Release Base For Your Quick Installation And Removal, Allowing You To Use It Conveniently In Any Environment (Not Including Cr123a Battery).
The Appearance Of Non Reflective / Rubber Coated Finish, The Interior Is Purged By Nitrogen Gas, With Fog-Resistant Internal Optics, With Good Anti-Fog Performance And Water-Resistant(Waterproof) To 33 Ft (10M). Made Of High Grade Aviation Aluminum Alloy, With Reliable Impact Resistance. Metal Housing Can Easily Cope With A Variety Of Harsh Environments..
Multi-Layer Coated Lenses: High Transmittance Lens, Provide You With A Clear, Wider Field Of View, No Mirror Effect, The Imaging Of The Target Will Be More Clear, Parallax Will Be Better, Better Eye Relief, A Brighter Image, And A More True Color Tone To Quickly Capture The Target To Ensure More Stable And Accurate. Super Clear Lens And Imaging, Providing The Operator With Maximum Situational Awareness.
Quick-Detach Fixed Mount, Switch-To-Sidetm Mounting Allows You Choose Whether Magnifier Flips Left Or Right, The Mount Provides Fast/Quickly Transitioning From 5X To 1X On The Fly And The G45 Optic Offers Tool-Free Vertical And Horizontal Adjustments With A Large Field-Of-View..
Features
- The G45 5X Magnifier Has The Similar Weight And Dimensional Properties As The Existing G33 Magnifier, But With An Additional 2X Magnification, Ups The Ante To 5X, For Precision At Greater Distances, Making Your Holographic Sight A Mid-Range Optic.
- Quick-Detach Fixed Mount, Switch-To-Sidetm Mounting Allows You Choose Whether Magnifier Flips Left Or Right, The Mount Provides Fast/Quickly Transitioning From 5X To 1X On The Fly And The G45 Optic Offers Tool-Free Vertical And Horizontal Adjustments With A Large Field-Of-View.
- 558 Has 20 Levels Of Brightness Adjustment, Holographic Hybrid Sight-Freely Switch Between Red And Green Dots, Internal Equipped With Low Power Consumption Circuit Board, Greatly Extending The Battery Life, And Uses A Quick Release Base For Your Quick Installation And Removal, Allowing You To Use It Conveniently In Any Environment (Not Including CR123A Battery)
- Multi-Layer Coated Lenses: High Transmittance Lens, Provide You With A Clear, Wider Field Of View, No Mirror Effect, The Imaging Of The Target Will Be More Clear, Parallax Will Be Better, Better Eye Relief, A Brighter Image, And A More True Color Tone To Quickly Capture The Target To Ensure More Stable And Accurate. Super Clear Lens And Imaging, Providing The Operator With Maximum Situational Awareness
- The Appearance Of Non Reflective / Rubber Coated Finish, The Interior Is Purged By Nitrogen Gas, With Fog-Resistant Internal Optics, With Good Anti-Fog Performance And Water-Resistant(Waterproof) To 33 FT (10M). Made Of High Grade Aviation Aluminum Alloy, With Reliable Impact Resistance. Metal Housing Can Easily Cope With A Variety Of Harsh Environments.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime Warranty
See On Amazon #10
Metal ML C+ Box Laser Sights with IR Laser + Red/Green/Blue Laser Sight + IR Fill Light + Strobe/Momentary/Constant Modes Whitelight LED 220 Lumens Flashlight for 20mm Rail (Green Laser BK)
Asin: B0CFDMW9DD
Ml C+ Box With High-Precision Red/Blue/Green Dot Laser & Ir & Led Flashlight. Led Flashlight With About 220 Lumens. Visible Red/Blue/Green Laser And Invisible Ir Laser Are Adjusted Easily And Freely Through The Box Body Screw Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Ml C+ Battery Box Is Made Of High-Quality High-Strength Cnc Aluminium Material, Lightweight、Strong And Durable, Easy To Install And Carry，And Weighs Only 400 G. Fits For Standard 20 Mm Rails..
Include 10 Function Modes : 1. Laser Constant Modes、2. Whitelight Constant Modes、3. Whitelight Strobe Modes、4. Ir Fill Light Constant Modes、5. Ir Fill Light Strobe Modes、6. Ir Laser Constant Modes、7. Laser + Whitelight Constant Modes、8. Laser + Whitelight Strobe Modes、9. Ir Laser Constant Modes + Ir Fill Light Strobe Modes、10. Ir Laser Constant Modes + Ir Fill Light Constant Modes.
Features
- ML C+ Output Power: Class IIIA. 4.95mW. Use CR123A*1 Battery Or 16340 *1 Battery (Battery Is Not Included. Remove The Battery When Not In Use, Otherwise It Will Cause The Battery To Run Out Of The Power!).
- Include 10 Function Modes : 1. Laser Constant Modes 2. Whitelight Constant Modes 3. Whitelight Strobe Modes 4. IR Fill Light Constant Modes 5. IR Fill Light Strobe Modes 6. IR Laser Constant Modes 7. Laser + Whitelight Constant Modes 8. Laser + Whitelight Strobe Modes 9. IR Laser Constant Modes + IR Fill Light Strobe Modes 10. IR Laser Constant Modes + IR Fill Light Constant Modes
- ML C+ Box With High-Precision Red/Blue/Green Dot Laser & IR & LED Flashlight. LED Flashlight With About 220 Lumens. Visible Red/Blue/Green Laser And Invisible IR Laser Are Adjusted Easily And Freely Through The Box Body Screw Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively.
- ML C+ Battery Box Is Made Of High-Quality High-Strength CNC Aluminium Material, Lightweight Strong And Durable, Easy To Install And Carry And Weighs Only 400 g. Fits For Standard 20 MM Rails.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Weight: 0.88 pounds
Warranty: Lifetime Warranty
See On Amazon #11
Metal PT-4 Box Laser Sights with IR Laser + Green Laser Sight 4-Level Laser Brightness with Pressure Switch for 20mm Rail (Green Laser)
Asin: B0CFGNKN5S
Pt-4 Box With High-Precision Red/Blue/Green Dot Laser & Ir. Visible Green Laser And Invisible Ir Laser Are Adjusted Easily And Freely Through The Box Body Rotate Button Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Pt-4 Battery Box Is Made Of High-Quality High-Strength Cnc Aluminium Material, Lightweight、Strong And Durable, Easy To Install And Carry，And Weighs Only 245 G. Fits For Standard 20 Mm Rails..
Include 5 Function Modes : 1. Laser Constant Modes、2. Laser Strobe Modes、3. Ir Constant Modes、4. Ir Strobe Modes、5. 4-Level Laser Brightness Level Adjust.
Features
- PT-4 Output Power: Class IIIA. 4.95mW. Use CR123A*1 Battery Or 16340 *1 Battery (Battery Is Not Included. Remove The Battery When Not In Use, Otherwise It Will Cause The Battery To Run Out Of The Power!).
- Include 5 Function Modes : 1. Laser Constant Modes 2. Laser Strobe Modes 3. IR Constant Modes 4. IR Strobe Modes 5. 4-Level Laser Brightness Level Adjust
- PT-4 Box With High-Precision Red/Blue/Green Dot Laser & IR. Visible Green Laser And Invisible IR Laser Are Adjusted Easily And Freely Through The Box Body Rotate Button Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively.
- PT-4 Battery Box Is Made Of High-Quality High-Strength CNC Aluminium Material, Lightweight Strong And Durable, Easy To Install And Carry And Weighs Only 245 g. Fits For Standard 20 MM Rails.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Weight: 0.54 Pounds
Warranty: Lifetime Warranty
See On Amazon #12
558 Green&Red Dot Holographic Sight | 5X Magnifier with Flip to Side QD Mount | Combo(Tan1)
Asin: B0CSZ64TJC
558 Holographic Red Green Dot Sight +5X Magnifier Quick-Release Flip Mount Magnifier Adds A 5X Magnification . Simple, Fast, And Effective, The Push Button Design Engages And Disengages The Flip Mount Allowing The Magnifier To Lock In At Your Desired Position..
558 Red Dot +5X Magnifier Is Nitrogen Purged For Reliable Waterproof And Fogproof Performance In The Field.Use Lens Cleaning Fluid And Optical Tissue Or Cloth To Clean Lenses.We Provide 7X24 Hours Service, The Product Is Not Satisfied. Full Refund At Any Time..
Durable & Compatible: Tough & Shockproof, The Hard-Coat-Anodized Machined-Aluminum Construction Ensures Durability. Made Of High Grade Aluminum Alloy Which Makes The Red Dot Sight Durable And Light Weight..
Quick Transitions-Simple, Fast, And Effective. The Flip-To-Side Picatinny Rail Mount To Allow You To Shoot Either 1X Or 5X Magnification By Simply Pushing The Magnifier To The Side..
Features
- Upgrade the new 5x magnifying glass + 558 red and green dot sight combination set, 5x magnifying glass effect than 3x clearer field of view.The lens are fully multi-coated maximizing resolution, light gathering capability, and color fidelity.
- Quick Transitions-Simple, fast, and effective. The flip-to-side picatinny rail mount to allow you to shoot either 1X or 5X magnification by simply pushing the magnifier to the side.
- 558 Holographic Red Green dot sight +5X Magnifier Quick-Release Flip Mount Magnifier adds a 5x magnification . Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.
- Durable & Compatible: Tough & shockproof, the hard-coat-anodized machined-aluminum construction ensures durability. Made of high grade aluminum alloy which makes the red dot sight durable and light weight.
- 558 red dot +5x magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.Use lens cleaning fluid and optical tissue or cloth to clean lenses.We provide 7x24 hours service, the product is not satisfied. Full refund at any time.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AWESOME
See On Amazon #13
Metal CQL-1 Box Laser Sights with IR Laser + Red/Green/Blue Laser Sight with Pressure Switch & M300/M600 Series Flashlight Base Mount for 20mm Rail (Green Laser BK)
Asin: B0CDZKZ6Y4
Cql-1 Box With High-Precision Red/Blue/Green Dot Laser & Ir. Visible Red/Blue/Green Laser And Invisible Ir Laser Are Adjusted Easily And Freely Through The Box Body Screw Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Cql-1 Battery Box Is Made Of High-Quality High-Strength Aluminium Material, Lightweight、Strong And Durable, Easy To Install And Carry，And Weighs Only 5.48 Oz. Fits For Standard 20 Mm Rails..
Include 4 Function Modes : 1. Laser Constant Modes、2. Laser Momentary Modes、3. Ir Laser Constant Modes、4. Ir Laser Momentary Modes、Equipped With Pressure Switch (Constant/Momentary Modes).
Features
- CQL-1 Output Power: Class IIIA. 4.95mW. Use CR123A*1 Battery Or 16340 *1 Battery (Battery Is Not Included. Remove The Battery When Not In Use, Otherwise It Will Cause The Battery To Run Out Of The Power!).
- Include 4 Function Modes : 1. Laser Constant Modes 2. Laser Momentary Modes 3. IR Laser Constant Modes 4. IR Laser Momentary Modes Equipped with Pressure Switch (Constant/Momentary Modes)
- CQL-1 Box With High-Precision Red/Blue/Green Dot Laser & IR. Visible Red/Blue/Green Laser And Invisible IR Laser Are Adjusted Easily And Freely Through The Box Body Screw Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively.
- CQL-1 Battery Box Is Made Of High-Quality High-Strength Aluminium Material, Lightweight Strong And Durable, Easy To Install And Carry And Weighs Only 5.48 Oz. Fits For Standard 20 MM Rails.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime Warranty
See On Amazon #14
Offset Scout Torch Light Base Mount Tactical Flashlight Extension Mount for M300 M600 Series for M & K Dual System with Screws and Hex Wrench CNC Aluminum
Asin: B0CBWGCSPH | Model: Light Base Mount | PartNumber: Light Base Mount
The Mount Has A 2-Hole Design And There Are Different Installation Methods For The Flashlight, Which Can Be Selected According To Personal Needs. The Offset Light Mount Is Adapted To M & K Dual System. It Can Be Installed On The Left Or Right Side Of The Mount According To Your Needs..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Easy To Install And Operate. The Slim Profile Of The Mounting System Itself, Provides Minimal Weight Reduction In Comparison To Other Light Mounts. Aluminum Alloy Material, Lightweight Wear-Resistant And Durable..
It Is At An Offset Angle Allowing Less ''Snag Points'' On The Users' System And Allowing The User To Maintain A Limited Profile Of His/Her System. Equipped With Screw Nut Set And Wrench For Easy Installation，Package Includes All Necessary Mounting Hardware Including Screws And Hex Wrench To Prevent Stripping.
Features
- Extends The Light Beyond The End Of The Forend Or Rail System Allowing The You To Place The Support Hand Farther Forward On The, Improving The Shooter'S Control. The Unique Extension Mounting Design Places The Bezel Of The M300 Or M600 Tactical Flashlights Above The And In Front Of The Front Sight Base
- It Is At An Offset Angle Allowing Less ''Snag Points'' On The Users' System And Allowing The User To Maintain A Limited Profile Of His/Her System. Equipped With Screw Nut Set And Wrench For Easy Installation Package Includes All Necessary Mounting Hardware Including Screws And Hex Wrench To Prevent Stripping
- The Mount Has A 2-Hole Design And There Are Different Installation Methods For The Flashlight, Which Can Be Selected According To Personal Needs. The Offset Light Mount Is Adapted To M & K Dual System. It Can Be Installed On The Left Or Right Side Of The Mount According To Your Needs.
- Easy To Install And Operate. The Slim Profile Of The Mounting System Itself, Provides Minimal Weight Reduction In Comparison To Other Light Mounts. Aluminum Alloy Material, Lightweight Wear-Resistant And Durable.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Dimensions: 1.17 x 0.78 x 3.90 Inches
Warranty: Lifetime warranty.
See On Amazon #15
Aimsniper Tactical Fast QD Lever Lock Quick Release for Optic Reflect Red Dot Sight 1.93"/1.54" Height Mount CNC Aluminium Hunting Accessories Compact & Firm 3Pcs
Asin: B0C9ZFSKR6
Quick Release Lever Qd Lock Design For Quick And Easy Installation Of Your Scope Mount. Adjustable Snap-On Design, More Convenient To Use. Quick Release Design Allows You To Easily Install And Remove The Swivel Lock Quickly And Easily..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
This Qd Lever Mount Is The Perfect Accessory For Any Scope. It Has An Elegant And Modern Design, With Bold Colors And Sharp Edges. Not Compatible With The Fast Optic Riser, The Nut Is Required To Prevent Damage To The Mounting Interface..
High Quality Material: Made Of High Quality Aluminum Alloy, Which Is Durable And Not Easily Deformed. The Lock Quick Release Mount Is Designed To Provide A Secure And Stable Connection Between Your Camera And The Lens..
Features
- QD Mount Compatible: The QD Mount Is Designed To Fit Into Any Scope Of Scopes, Making It Ideal For A Wide Range Of Applications. The Quick Release Lever Mount Is Compatible With A Wide Range Of Scopes. It Can Be Used For All Types Of Scopes, And More.
- High Quality Material: Made Of High Quality Aluminum Alloy, Which Is Durable And Not Easily Deformed. The Lock Quick Release Mount Is Designed To Provide A Secure And Stable Connection Between Your Camera And The Lens.
- Quick Release Lever QD Lock Design For Quick And Easy Installation Of Your Scope Mount. Adjustable Snap-On Design, More Convenient To Use. Quick Release Design Allows You To Easily Install And Remove The Swivel Lock Quickly And Easily.
- This QD Lever Mount Is The Perfect Accessory For Any Scope. It Has An Elegant And Modern Design, With Bold Colors And Sharp Edges. Not Compatible With The Fast Optic Riser, The Nut Is Required To Prevent Damage To The Mounting Interface.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime Warranty
See On Amazon #16
553 Red Dot Sight Holographic Green/Red Dot Sight Metal Scope Reflex Sights with Battery (Black)
Asin: B09PYHGDZV
Quick Rail Attachment Design. Weatherproof And Shockproof..
Multi-Coated Lens, Waterproof & Fogproof, Works Great In All Weather Conditions..
Light Adjustable Brightness. Red Or Green Dual Illuminated Dot Reticles With Adjustable Brightness..
Cantilever Pepr Mount Fits Any 20Mm Rail..
Features
- Solid metal construction, durable and shock proof. Red or green dual illuminated dot reticles with 5 level brightness control. Multi-coated lens, water proof & fog proof, works great in all weather conditions. Precision windage and elevation adjustments, features high/low profile quick release mount. Fits standard 20mm rails.
- Cantilever PEPR mount fits any 20mm rail.
- Quick rail attachment design. Weatherproof and shockproof.
- Light Adjustable Brightness. Red or green dual illuminated dot reticles with adjustable brightness.
- Multi-coated lens, waterproof & fogproof, works great in all weather conditions.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: awesome
Dimensions: 2.36 x 3.54 x 1.57 Inches | Weight: 0.30 Kilograms
See On Amazon #17
Plastic PEQ-15 Box Laser Sights with IR Laser + Red/Green Laser Sight + IR Light Illuminator Night Vision Flashlight with Pressure Switch for 20mm Rail (Green Laser BK)
Asin: B0CFDWKWWZ
Peq-15 Box With High-Precision Red/Green Dot Laser & Ir & Ir Light Illuminator Night Vision Flashlight. Visible Red/Green Laser And Invisible Ir Laser Are Adjusted Easily And Freely Through The Box Body Screw Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Peq-15 Battery Box Is Made Of High-Quality High-Strength Nylon Material, Lightweight、Strong And Durable, Easy To Install And Carry，And Weighs Only 5.48 Oz. Fits For Standard 20 Mm Rails..
Include 10 Function Modes : 1. Laser Constant Modes、2. Laser Momentary Modes、3. Laser Strobe Modes、4. Ir Flashlight Constant Modes、5. Ir Flashlight Momentary Modes、6. Ir Flashlight Strobe Modes、7. Ir Laser Constant Modes、8. Ir Laser Momentary Modes、9. Laser + Ir Flashlight Constant Modes、10. Laser + Ir Flashlight Momentary Modes、Equipped With Pressure Switch.
Features
- PEQ-15 Output Power: Class IIIA. 4.95mW. Use CR123A*1 Battery Or 16340 *1 Battery (Battery Is Not Included. Remove The Battery When Not In Use, Otherwise It Will Cause The Battery To Run Out Of The Power!).
- Include 10 Function Modes : 1. Laser Constant Modes 2. Laser Momentary Modes 3. Laser Strobe Modes 4. IR Flashlight Constant Modes 5. IR Flashlight Momentary Modes 6. IR Flashlight Strobe Modes 7. IR Laser Constant Modes 8. IR Laser Momentary Modes 9. Laser + IR Flashlight Constant Modes 10. Laser + IR Flashlight Momentary Modes Equipped with Pressure Switch
- PEQ-15 Box With High-Precision Red/Green Dot Laser & IR & IR Light Illuminator Night Vision Flashlight. Visible Red/Green Laser And Invisible IR Laser Are Adjusted Easily And Freely Through The Box Body Screw Fixed. --Note: Please Slowly Adjust Elevation And Windage Interactively.
- PEQ-15 Battery Box Is Made Of High-Quality High-Strength Nylon Material, Lightweight Strong And Durable, Easy To Install And Carry And Weighs Only 5.48 Oz. Fits For Standard 20 MM Rails.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime Warranty
See On Amazon #18
Remote Pressure Switch Mount Slot Plate Panel Fixed Base for Tactical Scout Flashlight & PEQ15 for 20mm Rails (SF Plug) Pressure Pad Switch Accessories CNC Aluminium (Black-for Large Size Switch)
Asin: B0CB7BWHSS | Model: Pressure Switch Mount | PartNumber: Pressure Switch Mount
Durable Aluminium Material，Tactical Switch Mounts Are Made Of Durable Safe Material, Lightweight And Sturdy And Durable Aluminum Construction, With More Firm Less Slack On Your Switch..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Easy To Install And All Tool Included. Available To Mount Anywhere On Rail For Left Or Right Handed. There Are Two Versions Of Large Size Switch Mount And Small Size, Which Give Users More Mounting Options..
Easy To Install，Which Is Ergonomic. The Bottom Of The Mount Simply Clips Into Your Rail. High Stability，Which Are Easy To Fit Into The Picatinny Groove And Will Not Slide..
Features
- The Remote Switch Rail Pad Is Suitable For 20Mm Wide Rail Mounts. Can Be Applied To Many Mainstream Tactical Flashlights And PEQ Remote Switch Mount.
- Easy To Install Which Is Ergonomic. The Bottom Of The Mount Simply Clips Into Your Rail. High Stability Which Are Easy To Fit Into The Picatinny Groove And Will Not Slide.
- Durable Aluminium Material Tactical Switch Mounts Are Made Of Durable Safe Material, Lightweight And Sturdy And Durable Aluminum Construction, With More Firm Less Slack On Your Switch.
- Easy To Install And All Tool Included. Available To Mount Anywhere On Rail For Left Or Right Handed. There Are Two Versions Of Large Size Switch Mount And Small Size, Which Give Users More Mounting Options.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Dimensions: 5.90 x 1.18 x 3.54 inches
Warranty: Lifetime warranty.
See On Amazon #19
Tactical Optic Wrap Fabric Protective Sticker Scope Skin for 558 Holographic Optical Reflection Sight Better Camouflage & Protecting (Black Multicam)
Asin: B0C9THYPQF
Non-Permanent And Completely Reversible. 3M Vhb (Very High Bond) Adhesive Backing..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Available In Colors Black Multicam Or Multicam Camouflage Patterns. Made By Us，It Has Two Excellent Advantages: 1. Protecting Your Scope. 2. Better Camouflage..
Easy To Install, Allows For Removal And Repositioning On Initial Application Without Any Loss Of Adhesion..
Features
- Looking To Protect Your Expensive Optics And Tactical Gear ?Precision Laser Pre-Cut Adhesive Backed Wrap. Peel And Stick Application. If You Can Apply A Sticker, You Can Install These Wraps.
- Easy To Install, Allows For Removal And Repositioning On Initial Application Without Any Loss Of Adhesion.
- Non-Permanent And Completely Reversible. 3M VHB (Very High Bond) Adhesive Backing.
- Available In Colors Black Multicam Or Multicam Camouflage Patterns. Made By Us It Has Two Excellent Advantages: 1. Protecting Your Scope. 2. Better Camouflage.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime Warranty
See On Amazon #20
Aimsniper 1.54 Optical Centerline Height Red Dot Riser Mount for T Series Etc Optic Sight Scope Riser Mount(BK)
Asin: B0CWGYZR9M | Model: Mount | PartNumber: Mount
Safe, Durable And Lightweight Without Shaking Or Quack. The Sight Holder Is Precision Machined From Aviation Grade Aluminum With Matte Black Hard Coated Anodic Oxidation..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
One Person Can Easily Install. Includes Internal Hexagonal Wrench, Simple And Friendly Installation，Micro Red Dot Sight Mount Includes 1 Base, 2 Screws , 1 Wrenches..
Provides Durable Safety In Use, Lightweight And Rugged Style.(Weights Only 2.61 Ounces）. Micro Red Dot Sight Bracket, Rugged 7075 Aluminum Matte Hard Coated Anodized.
Features
- Fully Designed For T Series And Other With Microfootprint, The Base Has A Universal Standard Rail Seat That You Can Be Directly Attached To The 20 Mm Rail.
- Provides Durable Safety In Use, Lightweight And Rugged Style.(Weights Only 2.61 Ounces . Micro Red Dot Sight Bracket, Rugged 7075 Aluminum Matte Hard Coated Anodized
- Safe, Durable And Lightweight Without Shaking Or Quack. The Sight Holder Is Precision Machined From Aviation Grade Aluminum With Matte Black Hard Coated Anodic Oxidation.
- One Person Can Easily Install. Includes Internal Hexagonal Wrench, Simple And Friendly Installation Micro Red Dot Sight Mount Includes 1 Base, 2 Screws , 1 Wrenches.
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: 2923898100852
See On Amazon #21
558+3X Sight, 558 Green/Red Dot Holographic Sight Scope + 3X Magnifying Glass, Quick Release Holographic Rollover Multiplier for 20mm Rail Mount (Black)
Asin: B09P7YRGDW | Ean: 0770456513125 | UPC: 770456513125
Durable & Compatible: Tough , The Hard-Coat-Anodized Machined-Aluminum Construction Ensures Durability. Made Of High Grade Aluminum Alloy Which Makes The Red Dot Sight Durable And Light Weight..
558 Holographic Sights +G3x Magnifier 1 Year Warranty. Unsatisfactory Full Refund. Feel Free To Contact Us If You Have Any Questions.
Featuring A Multi-Coated Lenses Which Provide A Clean, Bright And Unobscured Point Of View. Crisp 2Moa Red Green Dot For Precision Aiming Both-Eyes-Open Shooting. Unlimited Eye Relief For Rapid Target Acquisition..
Flexible - Hit Targets At All Ranges! Easily Switch From An Unmagnified Red Dot, 3X Magnification, All While Having The Laser Sight Active For Close Range Use.To Go From Up-Close Shooting To Long Range Precision With Ease!.
Features
- ACCURATE - 558 Holographic red green sights allows for accurate, both-eyes-open shooting. 5 red green dot brightness settings provide optimal visibility in any light conditions. Multi-coated, scratch resistant lenses provides enhanced image clarity.
- FLEXIBLE - Hit targets at all ranges! Easily switch from an unmagnified red dot, 3x magnification, all while having the laser sight active for close range use.to go from up-close shooting to long range precision with ease!
- Durable & Compatible: Tough , the hard-coat-anodized machined-aluminum construction ensures durability. Made of high grade aluminum alloy which makes the red dot sight durable and light weight.
- Featuring a multi-coated lenses which provide a clean, bright and unobscured point of view. Crisp 2MOA Red green Dot for precision aiming both-eyes-open shooting. Unlimited eye relief for rapid target acquisition.
- 558 Holographic sights +g3x magnifier 1 year warranty. Unsatisfactory full refund. Feel free to contact us if you have any questions
- See more on Amazon...
Brand: Aimsniper | Manufacturer: awesome
See On Amazon #22
552 Holographic Green/red dot Sight Metal Reflex Rifle Sights Black
Asin: B09Y2B6HJ9
【Solid】Very Sturdy And Secure Rail Mounting System. Will Not Come Loose, Made To Last.
【Package】 The Box - 1X 552 Red Green Dot Sight, 2 X Batteries，Instruction Sheet, Lens Cloth.Have Any Questions. Feel Free To Contact Us。We Will Help You To Solve.
【Green/Red Dot】This Red Green Reflex Scope Offer Red And Green Dot Switching And 5 Brightness Levels Adjustment.
【Accurate】: Parallax Corrected & Unlimited Eye-Relief.Reflex Sight Fully Adjustable Height, Brightness, Windage And Elevation. Where The Dot Goes, So Does The Point Of Impact..
Features
- Sturdy Design :Precision Machined from high grade aluminum with a matte Black anodized, includes standard profile
- Accurate : Parallax corrected & unlimited eye-relief.Reflex Sight Fully adjustable height, brightness, windage and elevation. Where the dot goes, so does the point of impact.
- Solid Very sturdy and secure rail mounting system. Will not come loose, made to last
- Green/Red Dot this Red Green reflex scope offer Red and green dot switching and 5 brightness levels Adjustment
- Package The Box - 1x 552 Red Green dot sight, 2 x batteries Instruction sheet, Lens cloth.Have any questions. Feel free to contact us We will help you to solve
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Awesome
Weight: 0.30 Kilograms
See On Amazon #23
Tactical Modular Wire Dual Button Remote Activation Pressure Switch With Constant/Momentary Modes for M600/M300 Series Etc Scout Flashlight For 20mm Rail And M/K Dual System Crane Laser Plug BK
Asin: B0CBJCT3WD | Model: Pressure Switch | PartNumber: Pressure Switch
2 Buttons Are Respectively Control The Lights，With Constant/Momentary Modes，You Can Switch Freely As Your Need, Is Very Simple To Use，Remote Pressure Switch With Momentary/Constant-On For Tactical Uses. Includes Switch Mounting Plate..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Lightweight Design, It Is Convenient To Carry Around And Use For Outdoors Activities，The Flashlight Pressure Switch Is Very Suitable For Hunting Light. A Good Choice For Hunting & Camping Series Outdoors Activities.
Made Of High-Quality Plastic, Lightweight, Wear-Resistant, Firmer And Better Shock-Resistant. High Quality Material，The Dual Buttons Remote Pressure Switch, Is Applied To M600/M300 Series Etc And More Scout Troch Lights And Flashlights.
Features
- Easy To Install, More Firm And Tight. Tactical Pressure Double Switch Is Compatible With 20Mm Rail And M Or K System.
- Made Of High-Quality Plastic, Lightweight, Wear-Resistant, Firmer And Better Shock-Resistant. High Quality Material The Dual Buttons Remote Pressure Switch, Is Applied To M600/M300 Series Etc And More Scout Troch Lights And Flashlights
- 2 Buttons Are Respectively Control The Lights With Constant/Momentary Modes You Can Switch Freely As Your Need, Is Very Simple To Use Remote Pressure Switch With Momentary/Constant-On For Tactical Uses. Includes Switch Mounting Plate.
- Lightweight Design, It Is Convenient To Carry Around And Use For Outdoors Activities The Flashlight Pressure Switch Is Very Suitable For Hunting Light. A Good Choice For Hunting & Camping Series Outdoors Activities
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Dimensions: 1.18 x 1.18 x 2.36 Inches
Warranty: Lifetime warranty.
See On Amazon #24
558+3X Sight, 558 Green/Red Dot Holographic Reflex Sight Scope and 3X Magnifying Glass Combo, Quick Release Rollover Multiplier for 20mm Rail Mount (Black)
Asin: B09PYNDB7Q
Designed For Lifting Range, Field Of View, Flashlight, Etc.
Customer Service: We Are Always Responsible For Our Products And Our Customers, Please Contact Us If You Have Any Problems With Our Products..
Holographic Hybrid Sight-Freely Switch Between Red And Green Dots, Allowing You To Use It Conveniently In Any Environment.
Versatile- Easy Upgrade To Extend The Range Of Any Red Dot Sight With 3X Magnification. Quickly Transition Between Short- And Long-Range Shooting Scenarios..
Features
- Fast Locating-Holographic hybrid sight and 3x magnifying glass combination is ideal for shooters who love fast-aiming middle-range shooting or middle-range hunting.
- Versatile- Easy upgrade to extend the range of any red dot sight with 3X magnification. Quickly transition between short- and long-range shooting scenarios.
- Designed for lifting range, field of view, flashlight, etc
- Holographic hybrid sight-freely switch between red and green dots, allowing you to use it conveniently in any environment
- Customer Service: We are always responsible for our products and our customers, please contact us if you have any problems with our products.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: awesome
See On Amazon #25
G33/G43/G45 3X/5X Magnifier for Red Dot Sight with Standard Spacer Mount & Side FILP Up QD Mount & Lens Protection Cover Quick Release Multi Coated Glass Lightweight & Compact (G33 3X Magnifier BK)
Asin: B0CC23218Z
G33 3X To 1X Magnification Switching With Ambidextrous Mount Flip Orientation To Allow Left Or Right Flip，Incredibly Fast Target Acquisition With 2.2 Inches Of Eye Relief. Incredibly Easy To Center The Dot In The Lens.
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Quick-Detach Fixed Mount, Mounts To Any 20Mm Rail, Switch-To-Side Mounting Allows You Choose Whether Magnifier Flips Left Or Right，Made Of High Grade Aluminum Alloy. Offers A Wider Field Of View, Better Eye Relief, A Brighter Image, And A More True Color Tone. O-Ring Sealed And Nitrogen Purged To Provide Waterproof, Fogproof And Shockproof Performance, Sealing Fog Resistant Internal Optics.
The G43 1 X To 3 X Micro Magnifying Glass Gives You Three Times The Magnification Of Your Red Dot Or Holographic Scope, It Saves You Space On The Rail And Is Lighter For Increased Use Flexibility, And With A Length And Weight Of 3 Inch And 0.44 Lbs Respectively.
Features
- The G45 5X Magnifier Has The Similar Weight And Dimensional Properties As The Existing G33 Magnifier, But With An Additional 2X Magnification, Ups The Ante To 5X, For Precision Greater Distances, Making Your Holographic Sight A Mid-Range Optic.
- The G43 1 X To 3 X Micro Magnifying Glass Gives You Three Times The Magnification Of Your Red Dot Or Holographic Scope, It Saves You Space On The Rail And Is Lighter For Increased Use Flexibility, And With A Length And Weight Of 3 Inch And 0.44 Lbs Respectively
- G33 3X To 1X Magnification Switching With Ambidextrous Mount Flip Orientation To Allow Left Or Right Flip Incredibly Fast Target Acquisition With 2.2 Inches Of Eye Relief. Incredibly Easy To Center The Dot In The Lens
- Quick-Detach Fixed Mount, Mounts To Any 20Mm Rail, Switch-To-Side Mounting Allows You Choose Whether Magnifier Flips Left Or Right Made Of High Grade Aluminum Alloy. Offers A Wider Field Of View, Better Eye Relief, A Brighter Image, And A More True Color Tone. O-Ring Sealed And Nitrogen Purged To Provide Waterproof, Fogproof And Shockproof Performance, Sealing Fog Resistant Internal Optics
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Warranty: Lifetime Warranty
See On Amazon #26
Tactical G33 3X Magnifier with FTC QD Mount Combo 2.91" Optical Centerline Height Quick Release & Flip-to-Center (FTC) Mechanism CNC Aluminum (G33 BK)
Asin: B0CH7SQCVS
Fast Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91” Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture..
This Fast Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit，Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The Fast Ftc Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45，Micro 3X, Micro 6X Etc..
The Revolutionary Ftc Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). Fast Ftc Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition..
G33 3X Magnifier Offers A Wider Field Of View, Better Eye Relief, A Brighter Image, And A More True Color Tone. Anti-Reflective Coatings On All Air-To-Glass Surfaces Provide Increased Light Transmission For Greater Clarity And Low-Light Performance. The Magnifier Is Shockproof And Has Been Nitrogen Purged For Reliable Water And Fogproof Performance In The Field..
Features
- The G33 3X Magnifier Weighs In At Only 6.9 Oz And Only 9.55 Oz When Including The Mount. The Micro 3X Magnifier Adds Next Level 3X Magnification To Your Red Dot Or Holographic Sight In An Ultra Compact, Lightweight, And Optically Crisp Package.
- G33 3X Magnifier Offers A Wider Field Of View, Better Eye Relief, A Brighter Image, And A More True Color Tone. Anti-Reflective Coatings On All Air-To-Glass Surfaces Provide Increased Light Transmission For Greater Clarity And Low-Light Performance. The Magnifier Is Shockproof And Has Been Nitrogen Purged For Reliable Water And Fogproof Performance In The Field.
- FAST Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91 Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture.
- The Revolutionary FTC Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). FAST FTC Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition.
- This FAST Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The FAST FTC Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45 Micro 3X, Micro 6X Etc.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Weight: 0.43 Pounds
Warranty: Lifetime Warranty
See On Amazon #27
AimSniper Red & Green Dot Sight Tactical Reflex Rifle Scope Adjustable Reticle (4 Styles) with 20mm Weaver Mount Rails
Asin: B091V3787N
【Accurate】: Parallax Corrected & Unlimited Eye-Relief. Reflex Sight Fully Adjustable Height, Brightness, Windage And Elevation. Where The Dot Goes, So Does The Point Of Impact..
【Multi-Layer Coating And Brightness Options】Reticle Allows For 4 Different Styles，Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot Combinations. All In One Sight! This Red Green Reflex Scope Offers A Total Of 8 Different Sighting Options And 5 Brightness Levels To Toggle Between.Product.Include: 1X Reflex Sight, 2X Screw Driver Tool, 1X Carry Bag, 1X User Manual, 1 Lithium-Ion Battery.And Cleaning Cloth.
【Easy To Install】: Built-In Scope Picatinny Mount Base For 20Mm (0.8”) Mounts. Tactical Sight Fit .22/.308 Airsoft Etc..
【Wide Field Of View】: Hd Glass Tubeless Design With 22X33mm Reflex Lens Aperture Provides Quick Target Acquisition, Also A Wider Field Of View To Maintain Situational Awareness..
Features
- Sturdy Design :Precision Machined from high grade aluminum with a matte Black anodized, includes standard profile 20mm Weaver Picatinny mounting base. Red Dot Sight Water resistance, fog and shock proof design for uncompromised performance in all weather conditions. Aluminium alloy offers long using life with light weight. we provide 5-year product warranty and 7 24 hrs friendly customer service.
- Wide Field of View : HD Glass Tubeless design with 22x33mm reflex lens aperture provides quick target acquisition, also a wider field of view to maintain situational awareness.
- Accurate : Parallax corrected & unlimited eye-relief. Reflex Sight Fully adjustable height, brightness, windage and elevation. Where the dot goes, so does the point of impact.
- Easy to Install : Built-in scope picatinny mount base for 20mm (0.8 ) mounts. tactical sight fit .22/.308 airsoft etc.
- Multi-layer coating and Brightness Options Reticle allows for 4 different styles Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight! this Red Green reflex scope offers a total of 8 different sighting options and 5 brightness levels to toggle between.Product.Include: 1x Reflex Sight, 2x Screw Driver Tool, 1x Carry Bag, 1x User Manual, 1 lithium-ion battery.And Cleaning Cloth
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AWESOME
Dimensions: 2.12 x 3.11 x 1.12 Inches | Weight: 0.25 Pounds
See On Amazon #28
Tactical G43 3X Magnifier with FTC QD Mount Combo 2.91" Optical Centerline Height Quick Release & Flip-to-Center (FTC) Mechanism CNC Aluminum (BK)
Asin: B0CH83H5KT
Fast Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91” Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture..
This Fast Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit，Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The Fast Ftc Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45，Micro 3X, Micro 6X Etc..
The Revolutionary Ftc Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). Fast Ftc Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition..
G43 3X Magnifier Offers A Wider Field Of View, Better Eye Relief, A Brighter Image, And A More True Color Tone. Anti-Reflective Coatings On All Air-To-Glass Surfaces Provide Increased Light Transmission For Greater Clarity And Low-Light Performance. The Magnifier Is Shockproof And Has Been Nitrogen Purged For Reliable Water And Fogproof Performance In The Field..
Features
- The G43 3X Magnifier Weighs In At Only 6.9 Oz And Only 9.55 Oz When Including The Mount. The Micro 3X Magnifier Adds Next Level 3X Magnification To Your Red Dot Or Holographic Sight In An Ultra Compact, Lightweight, And Optically Crisp Package.
- G43 3X Magnifier Offers A Wider Field Of View, Better Eye Relief, A Brighter Image, And A More True Color Tone. Anti-Reflective Coatings On All Air-To-Glass Surfaces Provide Increased Light Transmission For Greater Clarity And Low-Light Performance. The Magnifier Is Shockproof And Has Been Nitrogen Purged For Reliable Water And Fogproof Performance In The Field.
- FAST Is A Series Of Optic Mounts And Platforms That Provide End Users With A Quicker Sight Picture Than Standard Height Mounts. A 2.91 Optical Centerline Height Provides Faster/Easier Reticle Acquisition While Wearing Electronic/Communications Headsets, Night Vision Goggles And Masks And Allows For More Rapid Visual Processing Of The By Promoting A Heads-Up Posture.
- The Revolutionary FTC Function Completely Solves The Problem Posed By Legacy Flip-To-Side Magnifier Mounts (When Disengaged, The Magnifier Hangs Off The Side Of The, Creating A Major Snag Hazard). FAST FTC Magnifier Mounts Completely Eliminate This Danger And Utilize A Force-To-Overcome Mechanism For Rapid Transition.
- This FAST Mount Hangs The Magnifier Upside Down So As To Not Impinge The Adjustment Knobs On The Host Receiver. The Upside Down Position Of The Magnifier Does Not Impact The Function Or Performance Of The Unit Foldable Arm For Magnifier Allows Flexible Use Of Holographic Sight Alone Or With Magnifier, Reducing Risk Of Damage. The FAST FTC Magnifier Mount Is Compatible With The Following: G30, G23, G33, G43, G45 Micro 3X, Micro 6X Etc.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: Aimsniper
Weight: 0.43 Pounds
Warranty: Lifetime Warranty
See On Amazon #29
Aimsniper Rail Pocket Panel Mount for Tactical Scout Flashlight Pressure Switch Pad Remote Pressure Switch Mount Plate Fits 20mm Rail Aluminum(1Pcs)
Asin: B0CX44V68W | Model: Mount | PartNumber: Mount
Sturdy And Durable Aluminum Construction, With More Firm Less Slack On Your Tape Switch. The Product Attachment Is Specially Design To Compatible With Tactical Series Flashlight Pressure Switches..
We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement.
Staying Firmly In Place.For Flawless Switch Engagement. Ergonomic Comfort，Length Aluminum Base，Precision Fit Design And Finished With A Type Iii Hardcoat.
Available To Mount Anywhere On 20Mm Rail For Left Or Right Handed. Compatible With Pressure Pad And Other Suitable Size Remote Switch. Guaranteeing Enduring Excellence And Performance..
Features
- Easy To Install And All Tool Included. Designed To Fit Scout Flashlight Remote Switch Cable Guide Design Allows To Keep The Cable Out Of The Way.
- Available To Mount Anywhere On 20Mm Rail For Left Or Right Handed. Compatible With Pressure Pad And Other Suitable Size Remote Switch. Guaranteeing Enduring Excellence And Performance.
- Sturdy And Durable Aluminum Construction, With More Firm Less Slack On Your Tape Switch. The Product Attachment Is Specially Design To Compatible With Tactical Series Flashlight Pressure Switches.
- Staying Firmly In Place.For Flawless Switch Engagement. Ergonomic Comfort Length Aluminum Base Precision Fit Design And Finished With A Type III Hardcoat
- We Are Always Responsible For Our Products And Our Customers, Has Been Committed To Providing Customers With Quality Products And Satisfactory Service, If There Is Any Problem With Our Products, Please Contact Us And We Will Provide You With A Refund Or Replacement
- See more on Amazon...
Brand: Aimsniper | Manufacturer: 2891583383083
Dimensions: 1.18 x 3.54 x 0.39 Inches
Warranty: Lifetime warranty.
See On Amazon #30
Aimsniper 45 Degree Offset 20mm Picatinny Mount Rail Fit Laser Red Dot Optic Scope for Kel-Tec SUB 2000
Asin: B08TW6SW1L | Ean: 0769838307124 | UPC: 769838307124
【Function】：Allows Optimal Placement Of Accessories Such As Lasers And Sights. It Attaches Your Accessories Tightly To Your Weapon..
【Usage】：Ideal For Offset Mounting Of A Laser Or Reflex Sight, Perfect Choice For Kel-Tec Sub 2000, Your Equipment Can Fold All The Way When You Put On This Mount And Install Some Sight Models..
【Easy To Install】：It Is Fixed On Position With 2 Screws And Can Be Installed In One Of Eight Different Clock Positions..
【45 Degree Offset Rail】：The Laser/Red Dot Sight/Optics Can Be Mounted Stably At 1 Or 11 O'clock Position, Fitting Any 20Mm Standard Picatinny / Weaver Rail..
Features
- Made From Aluminum Aolly Very light weight, great low profile, superior anti-corrosion performance.
- 45 Degree Offset Rail The laser/red dot sight/optics can be mounted stably at 1 or 11 o'clock position, fitting any 20mm standard Picatinny / Weaver rail.
- Function Allows optimal placement of accessories such as lasers and sights. It attaches your accessories tightly to your weapon.
- Easy to Install It is fixed on position with 2 screws and can be installed in one of eight different clock positions.
- Usage Ideal for offset mounting of a laser or reflex sight, perfect choice for Kel-Tec SUB 2000, your equipment can fold all the way when you put on this mount and install some sight models.
- See more on Amazon...
Brand: Aimsniper | Manufacturer: AWESOME
Dimensions: 0.87 x 2.16 x 0.79 inches | Weight: 0.07 Pounds
See On Amazon