Andersen Restorations - Buying Guide
Last Updated: 05/07/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Andersen Restorations Rear End Control Arm Bushing Set Compatible with Chevrolet Full Size OEM Spec Replacements (8 Piece Kit)
Asin: B075WTHMN1
High-Quality: Oem Spec Replacements.
Included In The 8 Piece Kit: Upper Control Arm Bushings (2 Each), Front Lower Control Arm Bushings (2 Each), Rear Lower Control Arm Bushings (2 Each), Panhard Bar Bushings (2 Each).
Models: Compatible With Chevrolet Full Size.
Features
- YEARS: 1965, 1966, 1967, and 1968
- MODELS: Compatible with Chevrolet Full Size
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 8 PIECE KIT: Upper Control Arm Bushings (2 Each), Front Lower Control Arm Bushings (2 Each), Rear Lower Control Arm Bushings (2 Each), Panhard Bar Bushings (2 Each)
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 4.00 x 6.00 x 6.00 Inches
See On Amazon #2
Andersen Restorations Tie Rod End Adjusting Sleeve Set Compatible with Chevrolet Bel Air/Del Ray/Nomad/150 Series/210 Series OEM Spec Replacements (2 Piece Kit)
Asin: B08ZHR4H11
High-Quality: Oem Spec Replacements.
Also Contains: The Cotters Pins, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps (When Applicable)..
Included In The 2 Piece Kit: Tie Rod End Adjusting Sleeve Set (2 Each).
Models: Compatible With Chevrolet Bel Air, Del Ray, Nomad, 150 Series, And 210 Series.
Features
- YEARS: 1955, 1956, and 1957
- MODELS: Compatible with Chevrolet Bel Air, Del Ray, Nomad, 150 Series, and 210 Series
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 2 PIECE KIT: Tie Rod End Adjusting Sleeve Set (2 Each)
- ALSO CONTAINS: The Cotters Pins, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps (When Applicable).
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
See On Amazon #3
Andersen Restorations Front End Suspension Rebuild Kit with Idler Arm Compatible with Ford Mustang V8 Manual Steering OEM Spec Replacements (23 Piece Kit)
Asin: B07VWF9F8M
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 23 Piece Kit: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Strut Rod Kits (4 Each), Idler Arm.
Models: Compatible With Ford Mustangs With V8 And Manual Steering.
Features
- YEARS: 1965 and 1966
- MODELS: Compatible with Ford Mustangs with V8 and Manual Steering
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 23 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Strut Rod Kits (4 Each), Idler Arm
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
See On Amazon #4
Andersen Restorations Red Polyurethane Sway Bar Links Bushings Set Compatible with Chevrolet Chevelle/El Camino OEM Spec Replacements (4 Piece Kit)
Asin: B07919SZ9Q
High-Quality: Oem Spec Replacements.
Included In The 4 Piece Kit: Polyurethane Sway Bar Bushings (2 Each), Polyurethane Sway Bar Links (2 Each).
Models: Compatible With Chevrolet Chevelle And El Camino.
Features
- YEARS: 1968, 1969, and 1970
- MODELS: Compatible with Chevrolet Chevelle and El Camino
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 4 PIECE KIT: Polyurethane Sway Bar Bushings (2 Each), Polyurethane Sway Bar Links (2 Each)
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 6.00 x 4.00 inches
See On Amazon #5
Andersen Restorations Upper Lower Ball Joint Set Compatible with Ford Full Size OEM Spec Replacements (4 Piece Kit)
Asin: B077PLXFZ9
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 4 Piece Kit: Upper Ball Joints (2 Each) And Lower Ball Joints (2 Each).
Models: Compatible With Ford Full Size.
Features
- YEARS: 1965, 1966, 1967, and 1968
- MODELS: Compatible with Ford Full Size
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 4 PIECE KIT: Upper Ball Joints (2 Each) and Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 4.00 inches
See On Amazon #6
Andersen Restorations Idler Arm Compatible with Chevrolet 2WD C10 1/2 Ton Pickup OEM Spec Replacements (1 Piece Kit)
Asin: B078YFL7CK
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins.
Included In The 1 Piece Kit: Idler Arm.
Models: Compatible With Chevrolet 2Wd C10 1/2 Ton Pickups.
Features
- YEARS: 1963, 1964, 1965, and 1966
- MODELS: Compatible with Chevrolet 2WD C10 1/2 Ton Pickups
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 1 PIECE KIT: Idler Arm
- ALSO CONTAINS: The Cotter Pins
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 4.00 x 6.00 x 6.00 inches
See On Amazon #7
Andersen Restorations Front End Suspension Rebuild Kit Compatible with Ford Full Size Passenger OEM Spec Replacements (20 Piece Kit)
Asin: B075WR5PN8
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In This 20 Piece Kit: Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Links (2 Each), Sway Bar Bushings (2 Each) - 16.2 Mm (0.64 Inch), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each).
Models: Compatible With Ford Full Size Passenger - Vehicle Fitment: Ford Country Sedan 1964, Ford Country Squire 1964, Ford Galaxie 1964, Ford Galaxie 500 1964.
Features
- YEARS: 1964
- MODELS: Compatible with Ford Full Size Passenger - Vehicle Fitment: Ford Country Sedan 1964, Ford Country Squire 1964, Ford Galaxie 1964, Ford Galaxie 500 1964
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THIS 20 PIECE KIT: Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Links (2 Each), Sway Bar Bushings (2 Each) - 16.2 mm (0.64 Inch), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #8
Andersen Restorations Idler Arm Compatible with Ford Mustang with V8 Engine OEM Spec Replacements (1 Piece Kit)
Asin: B07YP11B35
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins.
Included In The 1 Piece Kit: Idler Arm.
Models: Compatible With Ford Mustangs With V8 Engine.
Features
- YEARS: 1964, 1965, and 1966
- MODELS: Compatible with Ford Mustangs with V8 Engine
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 1 PIECE KIT: Idler Arm
- ALSO CONTAINS: The Cotter Pins
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
See On Amazon #9
Andersen Restorations Red Polyurethane Front End Suspension Master Rebuild Kit Compatible with Plymouth Belvedere/GTX/Roadrunner/Satellite OEM Spec Replacements (27 Piece Kit)
Asin: B076V6PS37
High-Quality: Oem Spec Replacements.
Included In This 27 Piece Kit: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Polyurethane Sway Bar Links (2 Each), Polyurethane Sway Bar Bushings (2 Each), Strut Rod Bushings (2 Each), Polyurethane Upper Control Arm Bushings (4 Each), Polyurethane Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm.
Models: Compatible With Plymouth Belvederes, Gtx, Roadrunners, And Satellites.
Features
- YEARS: 1970, 1971, and 1972
- MODELS: Compatible with Plymouth Belvederes, GTX, Roadrunners, and Satellites
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THIS 27 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Polyurethane Sway Bar Links (2 Each), Polyurethane Sway Bar Bushings (2 Each), Strut Rod Bushings (2 Each), Polyurethane Upper Control Arm Bushings (4 Each), Polyurethane Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #10
A-Resto-Parts Tie Rod Steering Rebuild Kit Compatible With 1955, 1956, 1957 Full Size Vehicles, OEM Spec Replacements, 6 Piece Kit
Asin: B075RQLGYL
All-Inclusive Package: This Comprehensive Kit Includes Everything You Need For A Thorough Front End Rebuild; It Consists Of Inner Tie Rod End (Right And Left), Outer Tie Rod End (Right And Left), And Tie Rod Sleeves (2 Each), Along With The Necessary Tie Rod Sleeve Bolts, Nuts, And Clamps.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Car; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
High-Quality Oem Replacement Parts: This Tie Rod Steering Automotive Replacement Kit Features High-Quality Components That Are Designed As Oem Replacements. Each Piece Is Meticulously Crafted To Meet The Original Equipment Manufacturer's Specifications, Ensuring A Perfect Fit And Reliable Performance.
Durable Construction: Built To Last, These Components Guarantee Durability And Longevity; With This Kit, You Can Trust That Your Front End Will Withstand The Demands Of The Road For Years To Come.
Features
- MODEL YEARS: Enhance your driving experience with this high-quality front end rebuild kit compatible with for 1955, 1956 and 1957 Chevrolet Full Size; Enjoy precise steering and improved handling on the road
- DURABLE CONSTRUCTION: Built to last, these components guarantee durability and longevity; With this kit, you can trust that your front end will withstand the demands of the road for years to come
- ALL-INCLUSIVE PACKAGE: This comprehensive kit includes everything you need for a thorough front end rebuild; It consists of Inner Tie Rod End (Right and Left), Outer Tie Rod End (Right and Left), and Tie Rod Sleeves (2 Each), along with the necessary tie rod sleeve bolts, nuts, and clamps
- HIGH-QUALITY OEM REPLACEMENT PARTS: This Tie Rod Steering automotive replacement kit features high-quality components that are designed as OEM replacements. Each piece is meticulously crafted to meet the original equipment manufacturer's specifications, ensuring a perfect fit and reliable performance
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your car; Experience a smooth and reliable front suspension system that maintains the original design and performance
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 4.00 inches
See On Amazon #11
A-Resto-Parts Front End Suspension Rebuild Kit Compatible With 1964-1974 Corvette, OEM Spec Replacement Parts, 16 Piece Kit
Asin: B07568BDFY
Enhanced Handling And Control: By Replacing Worn-Out Or Damaged Components With This Comprehensive Rebuild Kit, You'll Enjoy Improved Handling And Control Over Your Vehicle; Experience A Revitalized Front Suspension System That Enhances The Overall Driving Experience.
High-Quality Oem Replacement Kit : Ensure A Precise Fit And Match The Original Equipment Installed By The Manufacturer, Providing Reliable Fit And Optimal Performance, Maintaining The Integrity Of Your Vehicle's Front End Suspension System.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Vehicle; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
Included Components: Inner Tie Rod Ends, Right And Left, Outer Tie Rod Ends, Right And Left, Tie Rod Sleeves (2 Each), Sway Bar Bolts (2 Each), Sway Bar Bushings (2 Each) - 18 Mm (0.71 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each).
Features
- 1968-1974 MODELS: This Complete Front End Rebuild kit is compatible with 1968, 1969, 1970, 1971, 1972, 1973, 1974 Chevrolet Corvettes; Each kit includes all you need plus cotter pins, rubber grease seals/boots, zerk fittings (when applicable), and bolts for the ball joints, tie rod sleeve bolts, nuts and clamps
- INCLUDED COMPONENTS: Inner Tie Rod Ends, Right and Left, Outer Tie Rod Ends, Right and Left, Tie Rod Sleeves (2 Each), Sway Bar Bolts (2 Each), Sway Bar Bushings (2 Each) - 18 mm (0.71 inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each)
- ENHANCED HANDLING AND CONTROL: By replacing worn-out or damaged components with this comprehensive rebuild kit, you'll enjoy improved handling and control over your vehicle; Experience a revitalized front suspension system that enhances the overall driving experience
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your vehicle; Experience a smooth and reliable front suspension system that maintains the original design and performance
- HIGH-QUALITY OEM REPLACEMENT KIT : Ensure a precise fit and match the original equipment installed by the manufacturer, providing reliable fit and optimal performance, maintaining the integrity of your vehicle's front end suspension system
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #12
A-Resto-Parts Front End Suspension Rebuild Kit With Idler Arm Compatible With 1963 & 1964 2WD C10 P10 1/2 Ton Pickup And Suburban Vehicles, OEM Spect Replacement Parts, 17 Piece Kit
Asin: B07568NGN8
Enhanced Handling And Control: By Replacing Worn-Out Or Damaged Components With This Comprehensive Rebuild Kit, You'll Enjoy Improved Handling And Control Over Your Vehicle; Experience A Revitalized Front Suspension System That Enhances The Overall Driving Experience.
High-Quality Oem Replacement Kit : Ensure A Precise Fit And Match The Original Equipment Installed By The Manufacturer, Providing Reliable Fit And Optimal Performance, Maintaining The Integrity Of Your Vehicle's Front End Suspension System.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With 1963 & 1964 Chevrolet 2Wd C10 P10 1/2 Ton Pickup And Suburban; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
Included Components: Inner Tie Rod Ends, Right And Left, Outer Tie Rod Ends, Right And Left, Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each)*** 17.5 Mm (0.68 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Left Hand Upper Control Arm Shaft Kit, Right Hand Upper Control Arm Shaft Kit, Left Hand Lower Control Arm Shaft Kit, Right Hand Lower Control Arm Shaft Kit, Idler Arm.
Features
- 1963 & 1964 MODELS: This Complete Front End Rebuild kit is compatible with 1963 & 1964 Chevrolet 2WD C10 P10 1/2 Ton Pickups and Surburbans; Each kit includes all you need plus cotter pins, rubber grease seals/boots, zerk fittings (when applicable), and bolts for the ball joints, tie rod sleeve bolts, nuts and clamps
- INCLUDED COMPONENTS: Inner Tie Rod Ends, Right and Left, Outer Tie Rod Ends, Right and Left, Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each)*** 17.5 mm (0.68 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Left hand Upper Control Arm Shaft Kit, Right hand Upper Control Arm Shaft Kit, Left hand Lower Control Arm Shaft Kit, Right hand Lower Control Arm Shaft Kit, Idler Arm
- ENHANCED HANDLING AND CONTROL: By replacing worn-out or damaged components with this comprehensive rebuild kit, you'll enjoy improved handling and control over your vehicle; Experience a revitalized front suspension system that enhances the overall driving experience
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with 1963 & 1964 Chevrolet 2WD C10 P10 1/2 Ton Pickup And Suburban; Experience a smooth and reliable front suspension system that maintains the original design and performance
- HIGH-QUALITY OEM REPLACEMENT KIT : Ensure a precise fit and match the original equipment installed by the manufacturer, providing reliable fit and optimal performance, maintaining the integrity of your vehicle's front end suspension system
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 18.00 x 6.00 inches
See On Amazon #13
Andersen Restorations Tie Rod Adjusting Sleeves Compatible with Chevrolet/GMC OEM Spec Replacements (2 Piece Kit)
Asin: B08Y81FF1L
High-Quality: Oem Spec Replacements.
Also Contains: The Tie Rod Sleeve Bolts, Nuts, And Clamps (When Applicable)..
Included In The 2 Piece Kit: Tie Rod Adjusting Sleeves (2 Each).
Models: Compatible With Chevrolet Full Size And Gmc 1/2 & 3/4 Ton Pickup.
Features
- YEARS: 1958-1964
- MODELS: Compatible with Chevrolet Full Size and GMC 1/2 & 3/4 Ton Pickup
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 2 PIECE KIT: Tie Rod Adjusting Sleeves (2 Each)
- ALSO CONTAINS: The Tie Rod Sleeve Bolts, Nuts, And Clamps (When Applicable).
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
See On Amazon #14
Andersen Restorations Upper Lower Ball Joint Set Compatible with Chevrolet Chevy II/Nova OEM Spec Replacements (4 Piece Kit)
Asin: B078YFVHG3
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints..
Included In The 4 Piece Kit: Upper Ball Joints (2 Each) And Lower Ball Joints (2 Each).
Models: Compatible With Chevrolet Chevy Ii And Novas.
Features
- YEARS: late model 1962 and 1963-1967
- MODELS: Compatible with Chevrolet Chevy II and Novas
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 4 PIECE KIT: Upper Ball Joints (2 Each) and Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 4.00 inches
See On Amazon #15
Andersen Restorations Tie Rod Steering Rebuild Kit Compatible with Ford Mustang 8 Cylinder Power Steering OEM Spec Replacements (6 Piece Kit)
Asin: B07W6KBV9Y
High-Quality: Oem Spec Replacements.
Also Contains: The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 6 Piece Kit: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each).
Models: Compatible With Ford Mustangs With 8 Cylinders Engines And Factory Power Steering.
Features
- YEARS: 1964, 1965, and 1966
- MODELS: Compatible with Ford Mustangs with 8 Cylinders Engines and Factory Power Steering
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 6 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each)
- ALSO CONTAINS: The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
See On Amazon #16
A-Resto-Parts Tie Rod Steering Rebuild Kit Compatible With 1962-1967 Chevy II, And Nova, OEM Spec Replacements, 6 Piece Kit
Asin: B077PLLCRM
All-Inclusive Package: This Comprehensive Kit Includes Everything You Need For A Thorough Front End Rebuild; It Consists Of Inner Tie Rod End (Right And Left), Outer Tie Rod End (Right And Left), And Tie Rod Sleeves (2 Each), Along With The Necessary Tie Rod Sleeve Bolts, Nuts, And Clamps.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Car; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
High-Quality Oem Replacement Parts: This Tie Rod Steering Automotive Replacement Kit Features High-Quality Components That Are Designed As Oem Replacements. Each Piece Is Meticulously Crafted To Meet The Original Equipment Manufacturer's Specifications, Ensuring A Perfect Fit And Reliable Performance.
Durable Construction: Built To Last, These Components Guarantee Durability And Longevity; With This Kit, You Can Trust That Your Front End Will Withstand The Demands Of The Road For Years To Come.
Features
- MODEL YEARS: Enhance your driving experience with this high-quality front end rebuild kit compatible with for 1962, 1963, 1964, 1965, 1966, 1967 Chevrolet Chevy II Nova; Enjoy precise steering and improved handling on the road
- DURABLE CONSTRUCTION: Built to last, these components guarantee durability and longevity; With this kit, you can trust that your front end will withstand the demands of the road for years to come
- ALL-INCLUSIVE PACKAGE: This comprehensive kit includes everything you need for a thorough front end rebuild; It consists of Inner Tie Rod End (Right and Left), Outer Tie Rod End (Right and Left), and Tie Rod Sleeves (2 Each), along with the necessary tie rod sleeve bolts, nuts, and clamps
- HIGH-QUALITY OEM REPLACEMENT PARTS: This Tie Rod Steering automotive replacement kit features high-quality components that are designed as OEM replacements. Each piece is meticulously crafted to meet the original equipment manufacturer's specifications, ensuring a perfect fit and reliable performance
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your car; Experience a smooth and reliable front suspension system that maintains the original design and performance
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 4.00 inches
See On Amazon #17
Andersen Restorations Upper Lower Ball Joint Set Compatible with Ford/Mercury Full Size OEM Spec Replacements (4 Piece Kit)
Asin: B075RPKKLF
High-Quality: Oem Spec Replacements Vehicle Fitment: , 1957-1964 Mercury Colony Park, 1957-1964 Mercury Commuter, 1957-1960 And 1964 Mercury Montclair, 1957-1964 Mercury Monterey, 1958-1960 And 1964 Mercury Park Lane, 1957 Mercury Turnpike Cruiser, And 1957-1959 Mercury Voyager.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints..
Included In The 4 Piece Kit: Upper Ball Joints (2 Each) And Lower Ball Joints (2 Each).
Models: Compatible With Ford And Mercury Full Size Vehicles - Vehicle Fitment: 1957-1964 Ford Country Sedan, 1957-1964 Ford Country Squire, 1957-1960 Ford Courier Sedan Delivery, 1957 And 1960 Ford Custom, 1957-1960 Ford Custom 300, 1957-1958 Del Rio Wagon, 1957-1961 Ford Fairlane, 1959-1964 Ford Galaxie, 1962-1964 Ford Galaxie 500, 1957-1962 Ford Ranch Wagon, 1957-1962 Ford Ranchero, 1960 Ford Starliner, 1957-1964 Ford Sunliner.
Features
- YEARS: 1957-1964
- MODELS: Compatible with Ford and Mercury Full Size Vehicles - Vehicle Fitment: 1957-1964 Ford Country Sedan, 1957-1964 Ford Country Squire, 1957-1960 Ford Courier Sedan Delivery, 1957 and 1960 Ford Custom, 1957-1960 Ford Custom 300, 1957-1958 Del Rio Wagon, 1957-1961 Ford Fairlane, 1959-1964 Ford Galaxie, 1962-1964 Ford Galaxie 500, 1957-1962 Ford Ranch Wagon, 1957-1962 Ford Ranchero, 1960 Ford Starliner, 1957-1964 Ford Sunliner
- HIGH-QUALITY: OEM Spec Replacements Vehicle Fitment: , 1957-1964 Mercury Colony Park, 1957-1964 Mercury Commuter, 1957-1960 and 1964 Mercury Montclair, 1957-1964 Mercury Monterey, 1958-1960 and 1964 Mercury Park Lane, 1957 Mercury Turnpike Cruiser, and 1957-1959 Mercury Voyager
- INCLUDED IN THE 4 PIECE KIT: Upper Ball Joints (2 Each) and Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
See On Amazon #18
Andersen Restorations Idler Arm Compatible with Chevrolet Camaro OEM Spec Replacements (1 Piece Kit)
Asin: B0763JTDZC
High-Quality: Oem Spec Replacements.
Also Contains: Cotter Pin.
Included In The 1 Piece Kit: Idler Arm.
Models: Compatible With Chevrolet Camaro.
Features
- YEARS: 1967
- MODELS: Compatible with Chevrolet Camaro
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 1 PIECE KIT: Idler Arm
- ALSO CONTAINS: Cotter Pin
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 4.00 x 6.00 x 6.00 inches
See On Amazon #19
Andersen Restorations Upper Lower Ball Joint Set Compatible with Chevrolet 2WD C10 1/2 Ton Pickup OEM Spec Replacements (4 Piece Kit)
Asin: B078YG9ZVG
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints..
Included In The 4 Piece Kit: Upper Ball Joints (2 Each) And Lower Ball Joints (2 Each).
Models: Compatible With Chevrolet 2Wd C10 1/2 Ton Pickups.
Features
- YEARS: 1963-1970
- MODELS: Compatible with Chevrolet 2WD C10 1/2 Ton Pickups
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 4 PIECE KIT: Upper Ball Joints (2 Each) and Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints.
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Chevrolet
Dimensions: 6.00 x 12.00 x 4.00 inches
See On Amazon #20
Andersen Restorations Upper and Lower Ball Joint Set Compatible with Dodge Dart/Demon with Drum Brakes OEM Spec Replacements (4 Piece Kit)
Asin: B07TT7YX6F
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 4 Piece Kit: Upper Ball Joints (2 Each) And Lower Ball Joints (2 Each).
Models: Compatible With Dodge Darts And Demons (Drum Brakes Only).
Features
- YEARS: 1963-1972
- MODELS: Compatible with Dodge Darts and Demons (Drum Brakes Only)
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 4 PIECE KIT: Upper Ball Joints (2 Each) and Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 4.00 x 12.00 x 6.00 Inches
See On Amazon #21
Andersen Restorations Front End Suspension Rebuild Kit with Round Lower Control Arm Bushings Compatible with Chevrolet Chevelle/El Camino OEM Spec Replacements (27 Piece Kit)
Asin: B07568L7K4
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 27 Piece Kit: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings - Round (4 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm (13/16 Inch Center Link).
Models: Compatible With Chevrolet Chevelles El Caminos.
Features
- YEARS: 1968, 1969, and 1970
- MODELS: Compatible with Chevrolet Chevelles El Caminos
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 27 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings - ROUND (4 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm (13/16 inch center link)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #22
A-RESTO-PARTS Front End Suspension Rebuild Kit Compatible With 1970 Cadillac Vehicles (YEARS: 1970)
Asin: B0BSMVBZGB | Model: YEARS: 1970 | PartNumber: YEARS: 1970
Included In The Kit: The Cotter Pins, Rubber Grease Seals/Boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Premium Quality: With Over 30 Years In The Car Restoration Business, We Handle Products That Meet Or Exceed All Original Equipment Manufacturers (O.E.M.) Specifications, And We Will Continue To Add To Our Product Lines And To Provide You With The Very Best Chassis Parts Available At The Very Best Prices You Can Find..
This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends, Right And Left. Outer Tie Rod Ends, Right, And Left. Tie Rod Sleeves (2 Each). Sway Bar Bolts (2 Each). Sway Bar Bushings (2 Each) - 0.780". Upper Right Ball Joint (1 Each). Upper Left Ball Joint (1 Each). Lower Ball Joints (2 Each). Upper Control Arm Bushings (4 Each) - 1 7/16" Diameter. Lower Control Arm Bushings (2 Each).
Features
- Compatible with: 1970 Cadillac Passenger Cars All Models including the following CALAIS 1970, DEVILLE 1970, SIXTY SPECIAL 1970, BROUGHAM 1970). These parts are Factory Design and will only work with Stock Vehicles.
- This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends, Right and Left. Outer Tie Rod Ends, Right, and Left. Tie Rod Sleeves (2 Each). Sway Bar Bolts (2 Each). Sway Bar Bushings (2 Each) - 0.780. Upper Right Ball Joint (1 Each). Upper Left Ball Joint (1 Each). Lower Ball Joints (2 Each). Upper Control Arm Bushings (4 Each) - 1 7/16 Diameter. Lower Control Arm Bushings (2 Each)
- Included in the Kit: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- Premium Quality: with over 30 years in the car restoration business, we handle products that meet or exceed all Original Equipment Manufacturers (O.E.M.) specifications, and we will continue to add to our product lines and to provide you with the very best chassis parts available at the very best prices you can find.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
See On Amazon #23
Andersen Restorations Rear End Control Arm Bushing Set Compatible with Chevrolet Full Size OEM Spec Replacements (8 Piece Kit)
Asin: B075RN7LZY
High-Quality: Oem Spec Replacements.
Included In The 8 Piece Kit: Upper Control Arm Bushings (2 Each), Front Lower Control Arm Bushings (2 Each), Rear Lower Control Arm Bushings (2 Each), Panhard Bar Bushings (2 Each).
Models: Compatible With Chevrolet Full Size - Vehicle Fitment: 1959-1961 Chevrolet Nomad, 1959-1964 Chevrolet Bel-Air, 1959-1964 Chevrolet Biscayne, 1959-1964 Chevrolet Impala.
Features
- YEARS: 1959-1964
- MODELS: Compatible with Chevrolet Full Size - Vehicle Fitment: 1959-1961 Chevrolet Nomad, 1959-1964 Chevrolet Bel-Air, 1959-1964 Chevrolet Biscayne, 1959-1964 Chevrolet Impala
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 8 PIECE KIT: Upper Control Arm Bushings (2 Each), Front Lower Control Arm Bushings (2 Each), Rear Lower Control Arm Bushings (2 Each), Panhard Bar Bushings (2 Each)
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 7.00 x 7.00 Inches
See On Amazon #24
A-Resto-Parts Front End Suspension Rebuild Kit With Idler Arm Compatible With 1971-1972 2WD C10 1/2 Ton Pickup Vehicles, OEM Spect Replacement Parts, 17 Piece Kit
Asin: B074T2RSG9
Enhanced Handling And Control: By Replacing Worn-Out Or Damaged Components With This Comprehensive Rebuild Kit, You'll Enjoy Improved Handling And Control Over Your Chevy C10; Experience A Revitalized Front Suspension System That Enhances The Overall Driving Experience.
High-Quality Oem Replacement Kit : Ensure A Precise Fit And Match The Original Equipment Installed By The Manufacturer, Providing Reliable Fit And Optimal Performance, Maintaining The Integrity Of Your Vehicle's Front End Suspension System.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Chevrolet C10 1/2 Ton Pickup; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
Included Components: Right And Left Inner Tie Rod End, Right And Left Outer Tie Rod Ends, Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each/ 19.5 Mm, 0.76 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Shaft Kits (2 Each), And An Idler Arm.
Features
- 1971-1972 MODELS: This Complete Front End Rebuild kit is compatible with 1971-1972 Chevy C10 1/2 Ton Pickups (2WD Only); Each kit includes all you need plus cotter pins, rubber grease seals/boots, zerk fittings (when applicable), and bolts for the ball joints, tie rod sleeve bolts, nuts and clamps
- INCLUDED COMPONENTS: Right and left inner tie rod end, right and left outer tie rod ends, tie rod sleeves (2 each), sway bar bushings (2 each/ 19.5 mm, 0.76 inch), upper ball joints (2 each), lower ball joints (2 each), upper control arm shaft kits (2 each), lower control arm shaft kits (2 each), and an idler arm
- ENHANCED HANDLING AND CONTROL: By replacing worn-out or damaged components with this comprehensive rebuild kit, you'll enjoy improved handling and control over your Chevy C10; Experience a revitalized front suspension system that enhances the overall driving experience
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your Chevrolet C10 1/2 Ton Pickup; Experience a smooth and reliable front suspension system that maintains the original design and performance
- HIGH-QUALITY OEM REPLACEMENT KIT : Ensure a precise fit and match the original equipment installed by the manufacturer, providing reliable fit and optimal performance, maintaining the integrity of your vehicle's front end suspension system
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #25
A-Resto-Parts Front End Suspension Master Rebuild Kit Idler Arm Bushing Repair Kit Compatible With 1955-1956 & 1957 Full Size Vehicles, OEM Replacement Parts, 28 Piece Kit
Asin: B07567P7QY
Included Components 2: Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (2 Each), Upper Control Arm Bumbers (2 Each), Lower Control Arm Bumpers (2 Each) And An Idler Arm Bushing Repair Kit.
High-Quality Oem Replacement Kit : Esure A Precise Fit And Match The Original Equipment Installed By The Manufacturer, Providing Reliable Fit And Optimal Performance, Maintaining The Integrity Of Your Vehicle's Front End Suspension System.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Chevrolet Full Size; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
Included Components 1: Right & Left Inner Tie Rod End, Right & Left Outer Tie Rod Ends, Tie Rod Sleeves (2 Each), Sway Bar Bolts (2 Each), Sway Bar Bushings (2 Each/ 17.5 Mm, 0.68 Inch), Strut Rod Bushings (4 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each).
Features
- 1955- 1957 MODELS: This Complete Front End Rebuild kit is compatible with For 1955-1956 & 1957 Chevy Full Size Vehicles; Each kit includes all you need plus cotter pins, rubber grease seals/boots, zerk fittings (when applicable), and bolts for the ball joints, plus tie rod sleeve bolts, nuts and clamps
- INCLUDED COMPONENTS 1: Right & left inner tie rod end, right & left outer tie rod ends, tie rod sleeves (2 each), sway bar bolts (2 each), sway bar bushings (2 each/ 17.5 mm, 0.68 inch), strut rod bushings (4 each), upper ball joints (2 each), lower ball joints (2 each)
- INCLUDED COMPONENTS 2: Upper control arm bushings (4 each), lower control arm bushings (2 each), upper control arm bumbers (2 each), lower control arm bumpers (2 each) and an idler arm bushing repair kit
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your Chevrolet full size; Experience a smooth and reliable front suspension system that maintains the original design and performance
- HIGH-QUALITY OEM REPLACEMENT KIT : Esure a precise fit and match the original equipment installed by the manufacturer, providing reliable fit and optimal performance, maintaining the integrity of your vehicle's front end suspension system
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #26
1961-1966 Ford Thunderbirds (1965-1966 Thunderbirds)
Asin: B075M4DN5M | Model: 1965-1966 Thunderbirds | PartNumber: 1965-1966 Thunderbirds
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zirc Fittings (When Applicable), Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 20 Piece Kit: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each).
Models: Compatible With Ford Thunderbird.
Features
- YEARS: 1965 and 1966
- MODELS: Compatible with Ford Thunderbird
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 20 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Links (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zirc Fittings (When Applicable), Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
Warranty: 1 Year Warranty
See On Amazon #27
A-Resto-Parts Front End Suspension Rebuild Kit With Idler Arm Compatible With 1965-1966 2WD C10 1/2 Ton Pickup, OEM Spect Replacement Parts, 17 Piece Kit
Asin: B074ZQN1QW
Enhanced Handling And Control: By Replacing Worn-Out Or Damaged Components With This Comprehensive Rebuild Kit, You'll Enjoy Improved Handling And Control Over Your Chevrolet C10; Experience A Revitalized Front Suspension System That Enhances The Overall Driving Experience.
High-Quality Oem Replacement Kit : Ensure A Precise Fit And Match The Original Equipment Installed By The Manufacturer, Providing Reliable Fit And Optimal Performance, Maintaining The Integrity Of Your Vehicle's Front End Suspension System.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Chevrolet C10 1/2 Ton Pickup; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
Included Components: Right And Left Inner Tie Rod End, Right And Left Outer Tie Rod Ends, Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each/ 19.5 Mm, 0.76 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Shaft Kits (2 Each), And An Idler Arm.
Features
- 1965 AND 1966 MODELS: This Complete Front End Rebuild kit is compatible with 1965-1966 Chevrolet C10 1/2 Ton Pickups (2WD Only); Each kit includes all you need plus cotter pins, rubber grease seals/boots, zerk fittings (when applicable), and bolts for the ball joints, tie rod sleeve bolts, nuts and clamps
- INCLUDED COMPONENTS: Right and left inner tie rod end, right and left outer tie rod ends, tie rod sleeves (2 each), sway bar bushings (2 each/ 19.5 mm, 0.76 inch), upper ball joints (2 each), lower ball joints (2 each), upper control arm shaft kits (2 each), lower control arm shaft kits (2 each), and an idler arm
- ENHANCED HANDLING AND CONTROL: By replacing worn-out or damaged components with this comprehensive rebuild kit, you'll enjoy improved handling and control over your Chevrolet C10; Experience a revitalized front suspension system that enhances the overall driving experience
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your Chevrolet C10 1/2 Ton Pickup; Experience a smooth and reliable front suspension system that maintains the original design and performance
- HIGH-QUALITY OEM REPLACEMENT KIT : Ensure a precise fit and match the original equipment installed by the manufacturer, providing reliable fit and optimal performance, maintaining the integrity of your vehicle's front end suspension system
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #28
A-Resto-Parts Front End Suspension Master Rebuild Kit With Idler Arm Compatible With 1968, And 1969 Camaros, OEM Spect Replacement Parts, 27 Piece Kit
Asin: B075FCH96Q
Included In The Kit: 2 Upper Ball Joints W/ Hardware, 2 Lower Ball Joints W/ Hardware, 4 Polyurethane Upper Control Arm Bushings, 4 Polyurethane Lower Control Arm Bushings, 2 Polyurethane Sway Bar Link Kits, 2 Polyurethane Sway Bar Bushings - 17.5 Mm (0.68 Inch), 2 Outer Tie Rods W/ Hardware, 2 Inner Tie Rods W/ Hardware, 2 Tie Rod Adjusting Sleeves W/ Clamps And Hardware, 2 Upper Control Arm Bumpers, 2 Lower Control Arm Bumpers, Idler Arm.
All-Inclusive Package: In Addition To The Essential Components, This Complete Front End Suspension Rebuild Kit Also Includes Cotter Pins, Rubber Grease Seals/Boots, Zerk Fittings (When Applicable), And Bolts For The Ball Joints. Furthermore, It Provides Tie Rod Sleeve Bolts, Nuts, And Clamps, Ensuring That You Have Everything Needed For A Comprehensive Suspension Rebuild.
Pre-Drilled Ball Joints And Tie Rods: The Ball Joints And Tie Rods Included In This Kit Come Pre-Drilled For Grease Fittings; This Feature Allows For Easy Lubrication, Ensuring Smooth And Efficient Operation Of These Critical Components.
Enhanced Stability And Control: By Utilizing Polyurethane Materials, This Kit Offers Superior Stability And Control During Cornering; The Polyurethane Suspension Parts Provide More Positive Control, Allowing You To Handle Your Vehicle With Confidence And Precision; This Complete Polyurethane Suspension Kit Is Pre-Assembled In The Usa.
Features
- HIGH-QUALITY OEM SPEC PERFORMANCE REPLACEMENT PARTS: Compatible with 1968 and 1969 Chevrolet Camaros; Red Polyurethane Front End Suspension Rebuild Kit, contains a comprehensive set of high-quality OEM spec performance replacement parts ensuring the ideal fit and optimal performance
- ENHANCED STABILITY AND CONTROL: By utilizing polyurethane materials, this kit offers superior stability and control during cornering; The Polyurethane suspension parts provide more positive control, allowing you to handle your vehicle with confidence and precision; This complete Polyurethane suspension kit is pre-assembled in the USA
- INCLUDED IN THE KIT: 2 Upper Ball Joints W/ Hardware, 2 Lower Ball Joints W/ Hardware, 4 Polyurethane Upper Control Arm Bushings, 4 Polyurethane Lower Control Arm Bushings, 2 Polyurethane Sway Bar Link Kits, 2 Polyurethane Sway Bar Bushings - 17.5 mm (0.68 inch), 2 Outer Tie Rods W/ Hardware, 2 Inner Tie Rods W/ Hardware, 2 Tie Rod Adjusting Sleeves W/ Clamps And Hardware, 2 Upper Control Arm Bumpers, 2 Lower Control Arm Bumpers, Idler Arm
- PRE-DRILLED BALL JOINTS AND TIE RODS: The ball joints and tie rods included in this kit come pre-drilled for grease fittings; This feature allows for easy lubrication, ensuring smooth and efficient operation of these critical components
- ALL-INCLUSIVE PACKAGE: In addition to the essential components, this complete front end suspension rebuild kit also includes cotter pins, rubber grease seals/boots, zerk fittings (when applicable), and bolts for the ball joints. Furthermore, it provides tie rod sleeve bolts, nuts, and clamps, ensuring that you have everything needed for a comprehensive suspension rebuild
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon #29
Andersen Restorations Tie Rod Steering Rebuild Kit with Sleeves Compatible with Chevrolet Corvette OEM Spec Replacements (6 Piece Kit)
Asin: B07582ZFH5
High-Quality: Oem Spec Replacements.
Also Contains: The Cotter Pins, Rubber Grease Seals/Boots, Zerk Fittings (When Applicable), Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps..
Included In The 6 Piece Kit: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each).
Models: Compatible With Chevrolet Corvette.
Features
- YEARS: 1953-1962
- MODELS: Compatible with Chevrolet Corvette
- HIGH-QUALITY: OEM Spec Replacements
- INCLUDED IN THE 6 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each)
- ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
- See more on Amazon...
Brand: Andersen Restorations | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 4.00 inches
See On Amazon #30
A-Resto-Parts Tie Rod Steering Rebuild Kit Compatible With 1963, 1964 Full Size Vehicles, OEM Spec Replacements, 6 Piece Kit
Asin: B075FDFMBP
All-Inclusive Package: This Comprehensive Kit Includes Everything You Need For A Thorough Front End Rebuild; It Consists Of Inner Tie Rod End (Right And Left), Outer Tie Rod End (Right And Left), And Tie Rod Sleeves (2 Each), Along With The Necessary Tie Rod Sleeve Bolts, Nuts, And Clamps.
Factory Design Stoch Vehicles: Designed Specifically For Stock Vehicles, This Kit Consists Of Factory-Designed Parts That Seamlessly Integrate With Your Car; Experience A Smooth And Reliable Front Suspension System That Maintains The Original Design And Performance.
High-Quality Oem Replacement Parts: This Tie Rod Steering Automotive Replacement Kit Features High-Quality Components That Are Designed As Oem Replacements. Each Piece Is Meticulously Crafted To Meet The Original Equipment Manufacturer's Specifications, Ensuring A Perfect Fit And Reliable Performance.
Durable Construction: Built To Last, These Components Guarantee Durability And Longevity; With This Kit, You Can Trust That Your Front End Will Withstand The Demands Of The Road For Years To Come.
Features
- MODEL YEARS: Enhance your driving experience with this high-quality front end rebuild kit compatible with for 1963 and 1964 Chevrolet Full Size; Enjoy precise steering and improved handling on the road
- DURABLE CONSTRUCTION: Built to last, these components guarantee durability and longevity; With this kit, you can trust that your front end will withstand the demands of the road for years to come
- ALL-INCLUSIVE PACKAGE: This comprehensive kit includes everything you need for a thorough front end rebuild; It consists of Inner Tie Rod End (Right and Left), Outer Tie Rod End (Right and Left), and Tie Rod Sleeves (2 Each), along with the necessary tie rod sleeve bolts, nuts, and clamps
- HIGH-QUALITY OEM REPLACEMENT PARTS: This Tie Rod Steering automotive replacement kit features high-quality components that are designed as OEM replacements. Each piece is meticulously crafted to meet the original equipment manufacturer's specifications, ensuring a perfect fit and reliable performance
- FACTORY DESIGN STOCH VEHICLES: Designed specifically for stock vehicles, this kit consists of factory-designed parts that seamlessly integrate with your car; Experience a smooth and reliable front suspension system that maintains the original design and performance
- See more on Amazon...
Brand: A-RESTO-PARTS | Manufacturer: Andersen Restorations
Dimensions: 6.00 x 12.00 x 8.00 inches
See On Amazon