Anztek - Buying Guide
Last Updated: 04/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Upgraded Power Wheels Adapter for Ryobi 18V Battery with Fuse & Wire terminals,Power Connector for Rc Car, Robotics,Rc Truck, DIY,Work for 18V P100 P102 P103 P107 P108 Li-ion & Ni-CD Battery
Asin: B09M3Y4SBJ | Ean: 0747781900869 | UPC: 747781900869
Convenient Wiring: The Product Contains Wiring Terminals, Which Is Convenient For Connecting The Positive And Negative Wires Of The Device To One End Of The Terminal, And Then Connect The Positive And Negative Wires Of The Adapter To The Other End. Make Sure That The Positive And Negative Electrodes Are In Correct Contact..
Important Reminder: Please Make Sure That The Positive And Negative Wires Of The Device Correspond To The Positive And Negative Wires Of The Adapter. If You Don’T Use It For A Long Time, Please Be Sure To Remove The Battery From The Adapter. If You Don’T Understand Anything, Please Feel Free To Contact Us Customer Service..
Multifunctional Use: The Power Wheel Adapter Is Installed With 12.5 Inches Of Awg14 Wire; You Can Use It To Upgrade Your Power Wheels, Remote Control Toys, Robot Diy, Etc. The Product Comes With 5 Spare Fuses For Easy Replacement Later..
Widely Compatible: Suitable For Ryobi P100 P102 P103 P104 P105 P107 P108 P109 Li-Ion & Ni-Cd Battery. Easy To Install And Can Lock The Battery Well..
Features
- Ensure sa-fe: There are 30A fuses on the positive and negative electrodes of the adapter to decrease excessive current from damaging the battery and power equipment.
- Widely compatible: suitable for Ryobi P100 P102 P103 P104 P105 P107 P108 P109 Li-ion & Ni-CD Battery. Easy to install and can lock the battery well.
- Convenient wiring: the product contains wiring terminals, which is convenient for connecting the positive and negative wires of the device to one end of the terminal, and then connect the positive and negative wires of the adapter to the other end. Make sure that the positive and negative electrodes are in correct contact.
- Multifunctional use: The power wheel adapter is installed with 12.5 inches of Awg14 wire; you can use it to upgrade your power wheels, remote control toys, robot DIY, etc. The product comes with 5 spare fuses for easy replacement later.
- Important reminder: Please make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If you don t use it for a long time, please be sure to remove the battery from the adapter. If you don t understand anything, please feel free to contact us customer service.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.11 Pounds
See On Amazon #2
Power Wheels Adapter for Ridgid AEG 18V Hyper li-ion Battery Dock Power Connector Rigid 12 Gauge Robotics
Asin: B0913H7WBP | Ean: 0728047582708 | UPC: 728047582708
Adapter Has 12 Gauge Wire Installed; Maximum Permissible Current 55.6A. Suitable For High Power Applications..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Ridgid AEG 18V Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adapter has 12 gauge wire installed; Maximum permissible current 55.6A. Suitable for high power applications.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.11 Pounds
See On Amazon #3
Anztek Replacement Shark Ion RVbat700 Battery for RV700,RV720,RV725,RV750 Model 14.8V 2600mAh Rechargeable Battery (3 Prong Plug)
Asin: B085MW5QQF | Ean: 0717461153441 | UPC: 717461153441
This Battery Is Not Fit For Shark Ion Robot Rv700_N,Rv720_N,Rv725_N,Rv750_N,Rv761,Rv850,Rv850brn,Rv850c,Rv850wv,Rv851wv,Rv871,Rv871c Model..
Because The Shark Ion Robot Series Battery Has Two Different Plugs （2 Prong And 3 Prong）,So Prevent The Battery Plug Does Not Fit You Model Shark Robots Number,You Must Check The Connector Of You Original Battery And The Model Of Your Machine. This Is Very Important..
Plesae Check Your Robot Model. Also Confirm The Original Battery Plug Before Purchase..
This Battery Only Fits For Shark Ion Robot Rv700,Rv720,Rv750,Rv725 Model(Only 4 Shark Robot Models)..
Features
- Battery Type:Li-ion / Voltage:14.8V / Capacity:2600mAh. High capacity for your Ecovacs & Shark machine, enough for clean the whole house.
- This Battery ONLY Fits for Shark Ion Robot RV700,RV720,RV750,RV725 Model(ONLY 4 shark robot Models).
- This Battery is NOT fit for Shark Ion Robot RV700_N,RV720_N,RV725_N,RV750_N,RV761,RV850,RV850BRN,RV850C,RV850WV,RV851WV,RV871,RV871C Model.
- Plesae check your robot model. Also confirm the original battery plug before purchase.
- Because the shark Ion robot series battery has two different plugs 2 Prong and 3 Prong ,So Prevent the battery plug does not fit you model shark robots number,You Must Check The Connector of you original battery and the model of your machine. This is very important.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.46 Pounds
See On Amazon #4
Table Saw Dust Collector Bag compatible with Bosch/Dewalt/Makita/Ryobi/Craftsman/Porter Cable/RIGID/Metabo/Kobalt/Skilsaw/Delta/ 10" Tablesaws with 2.5" Dust Port
Asin: B085BMTWMQ | Ean: 0717461153458 | UPC: 717461153458
Replaces Bosch Part Ts1004; Easy To Attach And Detach To Your Tablesaw;.
Can Be Used With Other Table Saws That Have 2-1/2 Inch Dust Ports On The Exterior Of The Saw..
Dimensions: L 31" X W 13.7" Head Side X W 9.8" End Side, D Of Ring 2.5" Up To 2 7/8";.
Helps Keep Work Area Cleaner; Collects Up To 75% Of Dust And Particles;.
Features
- Dust Collector Bag with Wire Support Frame;
- Helps keep work area cleaner; Collects up to 75% of dust and particles;
- Replaces Bosch part TS1004; Easy to attach and detach to your tablesaw;
- Dimensions: L 31 x W 13.7 head side x W 9.8 end side, D of ring 2.5 up to 2 7/8;
- Can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #5
2 Pack Power Wheels Adaptor for Milwaukee M18 18v Dock Power Connector 12 Gauge Robotics
Asin: B08LCD6YZF | Model: azlhmwxk2 | PartNumber: azlhmwxk2 | Ean: 0046432638466 | UPC: 046432638466
Adapter Has 12 Gauge Wire Installed; Maximum Permissible Current 55.6A..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Milwaukee M18 18-Volt Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adapter has 12 gauge wire installed; Maximum permissible current 55.6A.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.11 pounds
See On Amazon #6
Anztek Fit for MAKITA 18v Battery Power Mount Connector Adapter Dock Holder with 14 awg Wires
Asin: B086S47GZG | Model: BLDIY | PartNumber: BLDIY | Ean: 0717461153489 | UPC: 717461153489
Adapter Has 15 Inches Of 14 Gauge Wire Installed.
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Makita 18-Volt Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adapter has 15 inches of 14 gauge wire installed
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.13 pounds
See On Amazon #7
5 Packs Tool Holder Mount for Milwaukee M18 Tool ,Also Fit for Dewalt 20V , 12V Drill Holder ,Hanger (Lot of 5 Red)
Asin: B08YK63JT6 | Model: aztolh-7 | PartNumber: aztolh-7 | Ean: 0728047219864, 0728047582678 | UPC: 728047582678, 728047219864
Package Include: 5Pcs Holder, 20Pcs Screws..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Made Of High-Quality Abs Plastic, Sturdy To Use. (Not 3D Printed).
Mount This Holder On Your Wall With The 4 Screw Holes.
Features
- Tool holder for standard Dewalt 20V /12V tools ,for 18V Milwaukee M18 tools fastening on to wall or work bench.
- Mount this holder on your wall with the 4 screw holes
- Package include: 5pcs holder, 20pcs screws.
- Made of high-quality ABS plastic, sturdy to use. (not 3D printed)
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #8
Anztek Power Wheels Adapter for dewalt 20V Battery for dewalt 18V Dock Power Connector 12 Gauge Robotics
Asin: B08JLYPY4F | Model: azlhdw1 | PartNumber: azlhdw1 | Ean: 0046432388583, 0046432388538 | UPC: 046432388538, 046432388583
Adapter Has 12 Gauge Wire Installed; Maximum Permissible Current 55.6A..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install, Locks On You Battery Very Well.
Features
- Work With for Dewalt 20-Volt Lithium-Ion battery.
- Easy to install, locks on you battery very well
- Adapter has 12 gauge wire installed; Maximum permissible current 55.6A.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.15 Pounds
See On Amazon #9
Power Wheels Battery Adapter for Milwaukee M12 12V Dock Power Connector 12 Gauge Robotic
Asin: B08LCDJG5M | Model: azlhmw121 | PartNumber: azlhmw121 | Ean: 0046432638480 | UPC: 046432638480
Adapter Has 12 Gauge Wire Installed.
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Milwaukee M12 12-Volt Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adapter has 12 gauge wire installed
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.18 Pounds
See On Amazon #10
Anztek 5 Packs Tool Holder Dock Mount for Ryobi 18V Drill Tools Holder, Hanger(lot of 5,Green)
Asin: B09KXDRWGZ | Model: lybgj05 | PartNumber: lybgj05 | Ean: 0086972784605 | UPC: 086972784605
Package Includes 5Pcs Holder, 20Pcs Screws. Sufficient Number To Meet Your Need Of Tidying Workspace, And Protect Your Tools From Damage..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Made Of High-Quality Abs Plastic, Which Is Sturdy To Use (Not 3D Printed). Moreover, Only Weights 42G , Very Easy To Carry And Install..
Mount This Holder On Your Wall With 4 Screws(Included)..
Features
- Tool holder for standard Ryobi 18V tools on the wall, bench, garage, workshop, work truck, overhead, use to inventory management, display equipment.
- Mount this holder on your wall with 4 screws(included).
- Package includes 5pcs holder, 20pcs screws. Sufficient number to meet your need of tidying workspace, and protect your tools from damage.
- Made of high-quality ABS plastic, which is sturdy to use (not 3D printed). Moreover, only weights 42g , very easy to carry and install.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.09 pounds
See On Amazon #11
N/R Replacement Battery Pack for Shark Ion Robot RVBAT850 Battery for RV850, RV850BRN, RV850C, RV850WV, RV851WV, RV871, RV871C RV700_N, RV720_N, RV725_N, RV761,RV1000S,UR1000SR 2 Prong 14.4V 2600mAh
Asin: B085MR348M | Model: RVBAT850 | PartNumber: RVBAT850 | Ean: 0717461153465 | UPC: 717461153465
This Battery Only Fit For Shark Ion Robot Rv700_N, Rv720_N, Rv725_N, Rv761, Rv850, Rv850brn, Rv850c, Rv850wv, Rv851wv, Rv871, Rv871c ,Rv1000s, Ur1000sr Only Replacement Rvbat850 Battery..
Make Sure That You Original Battery Connector Is The Same As Pictured(2 Prong).If Your Original Battery Plug Is 3 Prong ,Please Do Not Buy This Battery..
Because The Shark Ion Robot Series Battery Has Two Different Plugs （2 Prong And 3 Prong）,So Prevent The Battery Plug Does Not Fit You Model Shark Robots Number,You Must Check The Connector Of You Original Battery And The Model Of Your Machine. This Is Very Important..
This Battery Not Fit For Shark Ion Robots Rv700,Rv720,Rv750,Rv755, Not Fit For Rvbat700 Battery.
Features
- Battery Type:Li-ion / Voltage:14.8V / Capacity:2600mAh. High capacity for your imachine, enough for clean the whole house
- This Battery NOT Fit for Shark Ion Robots RV700,RV720,RV750,RV755, NOT Fit for RVBAT700 Battery
- This Battery ONLY Fit for Shark Ion Robot RV700_N, RV720_N, RV725_N, RV761, RV850, RV850BRN, RV850C, RV850WV, RV851WV, RV871, RV871C ,RV1000S, UR1000SR Only Replacement RVBAT850 Battery.
- Because the shark Ion robot series battery has two different plugs 2 Prong and 3 Prong ,So Prevent the battery plug does not fit you model shark robots number,You Must Check The Connector of you original battery and the model of your machine. This is very important.
- Make sure that you original battery connector is the same as pictured(2 Prong).If your original battery plug is 3 Prong ,Please do not buy this Battery.
- See more on Amazon...
Brand: N/R | Manufacturer: Anztek
Weight: 0.44 pounds
Warranty: 1 year
See On Amazon #12
Power Wheels Battery Adapter for DeWALT Flexvolt 60V Max Battery Dock Power Connector 12 Gauge 54
Asin: B08LCW18KY | Model: DWDIY | PartNumber: DWDIY | Ean: 0046432638473 | UPC: 046432638473
Adapter Has 12 Gauge Wire Installed.
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Dewalt 60 Volt Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adapter has 12 gauge wire installed
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.12 pounds
See On Amazon #13
5 Packs Tool Mount for Dewalt 20V,12V Drill,Also Fit for Milwaukee M18 Tool Holder,Hanger (Lot of 5,Yellow)
Asin: B08YK8M5HG | Model: aztolh-8 | PartNumber: aztolh-8 | Ean: 0728047219871, 0728047582685 | UPC: 728047219871, 728047582685
Package Include: 5Pcs Holder, 20Pcs Screws..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Made Of High-Quality Abs Plastic, Sturdy To Use (Not 3D Printed).
Mount This Holder On Your Wall With The 4 Screw Holes.
Features
- Tool holder for standard Dewalt 20V /12V tools ,for 18V Milwaukee M18 tools fastening on to wall or work bench.
- Mount this holder on your wall with the 4 screw holes
- Package include: 5pcs holder, 20pcs screws.
- Made of high-quality ABS plastic, sturdy to use (not 3D printed)
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.44 Pounds
See On Amazon #14
Upgraded Power Wheels Adapter for Milwaukee M12 12V Battery with Fuse & Wire terminals,Power Connector for Rc Car, Robotics,Rc Truck, DIY,Work for Milwaukee M12 48-11-2420 48-11-2401 Li-ion Battery
Asin: B08NPP3VHG | Model: azlhmw12 | PartNumber: azlhmw12 | Ean: 0046432638503 | UPC: 046432638503
Convenient Wiring: The Product Contains Wiring Terminals, Which Is Convenient For Connecting The Positive And Negative Wires Of The Device To One End Of The Terminal, And Then Connect The Positive And Negative Wires Of The Adapter To The Other End. Make Sure That The Positive And Negative Electrodes Are In Correct Contact..
Important Reminder: Please Make Sure That The Positive And Negative Wires Of The Device Correspond To The Positive And Negative Wires Of The Adapter. If You Don’T Use It For A Long Time, Please Be Sure To Remove The Battery From The Adapter. If You Don’T Understand Anything, Please Feel Free To Contact Us Customer Service..
Multifunctional Use: The Power Wheel Adapter Is Installed With 12.5 Inches Of Awg14 Wire; You Can Use It To Upgrade Your Power Wheels, Remote Control Toys, Robot Diy, Etc. The Product Comes With 5 Spare Fuses For Easy Replacement Later..
Widely Compatible: Suitable For Milwaukee M12 48-11-2420 48-11-2401 Li-Ion Battery. Easy To Install And Can Lock The Battery Well..
Features
- Ensure safety: There are 30A fuses on the positive and negative electrodes of the adapter to prevent excessive current from damaging the battery and power equipment.
- Widely compatible: suitable for Milwaukee M12 48-11-2420 48-11-2401 Li-ion Battery. Easy to install and can lock the battery well.
- Convenient wiring: the product contains wiring terminals, which is convenient for connecting the positive and negative wires of the device to one end of the terminal, and then connect the positive and negative wires of the adapter to the other end. Make sure that the positive and negative electrodes are in correct contact.
- Multifunctional use: The power wheel adapter is installed with 12.5 inches of Awg14 wire; you can use it to upgrade your power wheels, remote control toys, robot DIY, etc. The product comes with 5 spare fuses for easy replacement later.
- Important reminder: Please make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If you don t use it for a long time, please be sure to remove the battery from the adapter. If you don t understand anything, please feel free to contact us customer service.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.26 pounds
See On Amazon #15
Power Wheels Adapter for Ryobi 18V P108 P107 P102 Battery Dock Power Connector Rc car Rc Truck 12 Gauge Robotics
Asin: B0977YGTCT | Ean: 0723258617010 | UPC: 723258617010
Adapter Has 12 Gauge Wire Installed; Maximum Permissible Current 55.6A..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Ryobi 18V Lithium-Ion battery and 18V NI-CD Battery.
- Easy to install,locks on you battery very well.
- Adapter has 12 gauge wire installed; Maximum permissible current 55.6A.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.11 pounds
See On Amazon #16
5 Packs Tool Holder Dock Mount for Makita 18V Li-ion Drill Tools Holder, Hanger(lot of 5,Cyan-Blue)
Asin: B08YDWQV2W | Model: aztolh-4 | PartNumber: aztolh-4 | Ean: 0728047219826, 0728047582647 | UPC: 728047582647, 728047219826
Package Include: 5Pcs Holder, 20Pcs Screws.
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Made Of High-Quality Abs Plastic, Sturdy To Use. (Not 3D Printed).
Mount This Holder On Your Wall With The 4 Screw Holes..
Features
- Tool holder for standard Makita 18V Li-ion tools only, fastening on to wall or work bench. Not fit 18V NI-CD Tool
- Mount this holder on your wall with the 4 screw holes.
- Package include: 5pcs holder, 20pcs screws
- Made of high-quality ABS plastic, sturdy to use. (not 3D printed)
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #17
Power Wheels Adapter for Milwaukee M18 Battery 18v Dock Power Connector 12 Gauge Robotics
Asin: B08LCB78FD | Model: azlhxkmw1 | PartNumber: azlhxkmw1 | Ean: 0046432638459 | UPC: 046432638459
Adapter Has 12 Gauge Wire Installed; Maximum Permissible Current 55.6A..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Milwaukee M18 18-Volt Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adapter has 12 gauge wire installed; Maximum permissible current 55.6A.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #18
Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter
Asin: B08FCMH3VF | Model: AZ-FS01 | PartNumber: AZ-FS01 | Ean: 0732489616099 | UPC: 732489616099
Optimized 3000 Rpm High Suction Fan Is Low Noise And Allows You To Remove Fumes 5-6 Inches Away. Long-Lasting Working Time For Over 50,000 Hours..
It's A Good Helper For Mobile Phone Maintenance, Great For Electronics, Arts And Crafts, Stained Glass Work, Soldering Station Work..
Comes With 5 Active Carbon Filters. The Filter Is Made Of Special Foam With Refined Activated Carbon, Which Has High Suction And Flux Absorption Properties..
It Adopt The High Performance Fan With Low Noise, And The Suction Is Strongthe Structure Is Simple. The Replacement Of The Activated Carbon Filter Piece Is Convenient And Quick..
Features
- Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
- It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter piece is convenient and quick.
- Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours.
- Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.
- It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #19
Power Wheels Adaptor for Ryobi 18V P108 P107 P102 Battery Dock Power Connector 14 Gauge Robotics
Asin: B08X6VQ2H3 | Ean: 0086972784599 | UPC: 086972784599
Adapter Has 10 Inches Of 14 Gauge Wire Installed; Maximum Permissible Current 55.6A..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Ryobi 18V Lithium-Ion and Ni-Cd battery.
- Easy to install,locks on you battery very well.
- Adapter has 10 inches of 14 gauge wire installed; Maximum permissible current 55.6A.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.11 pounds
See On Amazon #20
Power Wheels Adapter for Black and Decker 20V Dock Power Connector 12 Gauge Robotics
Asin: B091835NXL | Ean: 0723258616990 | UPC: 723258616990
Adaptor Has 12 Gauge Wire Installed; Maximum Permissible Current 55.6A..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Suitable For High Power Applications..
Easy To Install,Locks On You Battery Very Well..
Features
- Work With Black&decker 20-Volt Lithium-Ion battery.
- Easy to install,locks on you battery very well.
- Adaptor has 12 gauge wire installed; Maximum permissible current 55.6A.
- Suitable for high power applications.
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
Weight: 0.11 pounds
See On Amazon #21
10 Packs Tool Holder Mount for Milwaukee M18 Tool,Also Fit for Dewalt 20V, 12V Dril Holder,Hanger (Lot of 10 Red)
Asin: B09M3Y3SPQ | Ean: 0747781900821 | UPC: 747781900821
Package Include: 10Pcs Holder, 40Pcs Screws..
Best Warranty And Professional Customer Service --- If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Get Back To You With Completely Satisfying Reply Within 24 Hours..
Made Of High-Quality Abs Plastic, Sturdy And Durable (Not 3D Printed).
Mount This Holder On Your Wall With The 4 Screw Holes.
Features
- Tool holder for standard Dewalt 20V /12V tools ,for 18V Milwaukee M18 tools fastening on to wall or work bench.
- Mount this holder on your wall with the 4 screw holes
- Package include: 10pcs holder, 40pcs screws.
- Made of high-quality ABS plastic, sturdy and durable (not 3D printed)
- Best Warranty and Professional customer service --- If you have any problems, please do not hesitate to contact us, we will get back to you with completely satisfying reply within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #22
5 Pack Tool Mount for Milwaukee 18V Drill ; Battery Holder for Milwaukee 18V M18 Battery MOUNT/Hanger/Dock Holder Fit for 48-11-1850 48-11-1860 Battery, also mount for Dewalt 20V battery and 18V tool
Asin: B09KR7WMGX | Ean: 0728047219888 | UPC: 728047219888
Battery Holder For Dewalt 20V / 18V Battery Ex: Dcb200 Dcb203 Dcb205 Dcb206 Dcb180 Dcb183 Battery.
Customer Service - If You Have Any Problems, Please Do Not Hesitate To Contact Us, We Will Try Our Best To Reply You A Completely Satisfying Solution Within 24 Hours..
Mount This Holder On Your Wall With The 3 Screw Holes,Made Of High-Quality Abs Plastic, Sturdy And Durable (Not 3D Printed).
Tool Holder For Milwaukee M18 18V Tools ,Also For Dewalt 20V/18V Tools Fastening On To Wall Or Work Bench..
Features
- Battery holder for Milwaukee 18V M18 Battery EX: 48-11-1820 48-11-1850 48-11-1828 48-11-1860 48-11-1890 Battery
- Tool holder for Milwaukee M18 18V tools ,also for Dewalt 20V/18V tools fastening on to wall or work bench.
- Battery holder for Dewalt 20V / 18V Battery EX: DCB200 DCB203 DCB205 DCB206 DCB180 DCB183 Battery
- Mount this holder on your wall with the 3 screw holes,Made of high-quality ABS plastic, sturdy and durable (not 3D printed)
- Customer service - If you have any problems, please do not hesitate to contact us, we will try our best to reply you a completely satisfying solution within 24 hours.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #23
10Packs Tool Holders for Milwaukee M18 Power Tools & 5Packs Battery Holders for Milwaukee M18 18V Batteries
Asin: B0CRRRZFHG
Well Organized Your Batteries And Tools - With The Holders And Screws, You Can Place The Batteries And Tools Neatly. Not Only Making Your Work Bench Look More Cleaner, But Also Easily Sorting Access To Batteries And Tools. Super Handy And Always Available..
What Will You Get - Package Include, Battery Holders X 5, Tool Holders X 10 And Screws. If You Have Any Issues, Please Feel Free To Let Us Know To Solve Your Problems Within 24 Hours..
Easy To Mount - Assemble The Battery Holder With 2 Screws And Tool Holder With 4 Screws(Included). Then Just Slide In, You Can Complete The Installation..
10 Packs Tools Holders - Perfectly Suitable For Milwaukee M18 18V Drill Tools..
Features
- 5 Packs Battery Holders - Perfectly fit for Milwaukee M18 18v batteries, such as 48-11-1880 / 48-11-1862 / 48-11-1865 / 48-11-1815 / 48-11-1820 / 48-11-1828 / 48-11-1840 / 48-11-1850 / 48-11-1860 and etc.
- 10 Packs Tools Holders - Perfectly suitable for Milwaukee M18 18v drill tools.
- Well Organized Your Batteries And Tools - With the holders and screws, you can place the batteries and tools neatly. Not only making your work bench look more cleaner, but also easily sorting access to batteries and tools. Super handy and always available.
- Easy to Mount - Assemble the battery holder with 2 screws and tool holder with 4 screws(included). Then Just slide in, you can complete the installation.
- What Will You Get - Package include, battery holders x 5, tool holders x 10 and screws. If you have any issues, please feel free to let us know to solve your problems within 24 hours.
- See more on Amazon...
Brand: Anztek
See On Amazon #24
10Packs Tool Holders for Dewalt 20v Power Tools & 5Packs Battery Holders for Dewalt 20v Batteries
Asin: B0CRRSBTRD
Well Organized Your Batteries And Tools - With The Holders And Screws, You Can Place The Batteries And Tools Neatly. Not Only Making Your Work Bench Look More Cleaner, But Also Easily Sorting Access To Batteries And Tools. Super Handy And Always Available..
What Will You Get - Package Include, Battery Holders X 5, Tool Holders X 10 And Screws. If You Have Any Issues, Please Feel Free To Let Us Know To Solve Your Problems Within 24 Hours..
Easy To Mount - Assemble The Battery Holder With 2 Screws And Tool Holder With 4 Screws(Included). Then Just Slide In, You Can Complete The Installation..
10 Packs Tools Holders - Perfectly Suitable For Dewalt 18V 20V 60V Drill And Other Power Tools..
Features
- 5 Packs Battery Holders - Perfectly fit for Dewalt 18v 20v 60v batteries, such as DCB200 DCB201 DCB202 DCB203 DCB204 DCB205 DCB206 DCB208 and DCB606 DCB609 batteries, etc.
- 10 Packs Tools Holders - Perfectly suitable for Dewalt 18v 20v 60v drill and other power tools.
- Well Organized Your Batteries And Tools - With the holders and screws, you can place the batteries and tools neatly. Not only making your work bench look more cleaner, but also easily sorting access to batteries and tools. Super handy and always available.
- Easy to Mount - Assemble the battery holder with 2 screws and tool holder with 4 screws(included). Then Just slide in, you can complete the installation.
- What Will You Get - Package include, battery holders x 5, tool holders x 10 and screws. If you have any issues, please feel free to let us know to solve your problems within 24 hours.
- See more on Amazon...
Brand: Anztek
See On Amazon #25
2Packs Power Wheels Adapter & 2Packs Upgraded Power Wheels Adapter for Milwaukee M18 18v Battery with On/Off Switch
Asin: B0CYLWLWBS
Easy To Set Up - Only Need To Slide In The Adapter Into The Battery Groove, Then Push Converter And Make Sure It Has Locked The Battery. Quick-Connect Terminals Are Ideal For High-Power Hardware Use. You Can Complete The Installation In 1Minute. Remove Adapter Just Need To Press The Battery Snap Button To Pull Out The Adapter..
Important Notes - 1. The Power Wheel Adapter Is Not A Battery Charger, It Only Outputs Directly The Voltage And Power From Your Battery. 2. The Red Wire Is Connected To The Positive Terminal, Black Wire Is Connected To The Negative Terminal. 3. If Not Used For A Long Time, Please Be Sure To Remove The Battery Form The Adapter..
Multiple Application - The Power Wheels Battery Adapter Is Designed With 14Awg Wire, Maximum Permissible Current 30A. You Can Use It To Upgrade Your Power Wheels, Also A Nice Way To Use Your 18 Volt Batteries For Diy Projects, Such As Connected Them To Led Lights, Water Pump, Rc Toys, Work Lights Or Robotics Etc. Greatly Improve The Convenience Of Your Life..
Wide Compatibility - Perfectly Suitable For Milwaukee M18 18V Batteries, Such As 48-11-1880 / 48-11-1862 / 48-11-1865 / 48-11-1815 / 48-11-1820 / 48-11-1828 / 48-11-1840 / 48-11-1850 / 48-11-1860 Batteries, Etc..
Features
- Upgraded Design for Security Use- Equipped with the all-in-one fuse and on/off switch device, which allows you to easily connect and disconnect the power and battery, ensure security use.
- Wide compatibility - Perfectly suitable for Milwaukee M18 18v batteries, such as 48-11-1880 / 48-11-1862 / 48-11-1865 / 48-11-1815 / 48-11-1820 / 48-11-1828 / 48-11-1840 / 48-11-1850 / 48-11-1860 batteries, etc.
- Easy to Set up - Only need to slide in the adapter into the battery groove, then push converter and make sure it has locked the battery. Quick-connect terminals are ideal for high-power hardware use. You can complete the installation in 1minute. Remove adapter just need to press the battery snap button to pull out the adapter.
- Multiple Application - The power wheels battery adapter is designed with 14AWG Wire, Maximum permissible current 30A. You can use it to upgrade your power wheels, also a nice way to use your 18 volt batteries for DIY projects, such as connected them to LED Lights, water pump, RC toys, work lights or Robotics etc. Greatly improve the convenience of your life.
- Important Notes - 1. The power wheel adapter is NOT a battery charger, it only outputs directly the voltage and power from your battery. 2. The red wire is connected to the positive terminal, black wire is connected to the negative terminal. 3. If not used for a long time, please be sure to remove the battery form the adapter.
- See more on Amazon...
Brand: Anztek
See On Amazon #26
1Pack Power Wheels Adapter & 2Packs Upgraded Power Wheels Adapter for Ryobi 18v Battery with ON/Off Switch
Asin: B0CYLVZV29
Easy To Set Up - Only Need To Slide In The Adapter Into The Battery Groove, Then Push Converter And Make Sure It Has Locked The Battery. Quick-Connect Terminals Are Ideal For High-Power Hardware Use. You Can Complete The Installation In 1Minute. Remove Adapter Just Need To Press The Battery Snap Button To Pull Out The Adapter..
Important Notes - 1. The Power Wheel Adapter Is Not A Battery Charger, It Only Outputs Directly The Voltage And Power From Your Battery. 2. The Red Wire Is Connected To The Positive Terminal, Black Wire Is Connected To The Negative Terminal. 3. If Not Used For A Long Time, Please Be Sure To Remove The Battery Form The Adapter..
Multiple Application - The Power Wheels Battery Adapter Is Designed With 14Awg Wire, Maximum Permissible Current 30A. You Can Use It To Upgrade Your Power Wheels, Also A Nice Way To Use Your 18 Volt Batteries For Diy Projects, Such As Connected Them To Led Lights, Water Pump, Rc Toys, Work Lights Or Robotics Etc. Greatly Improve The Convenience Of Your Life..
Wide Compatibility - Perfectly Suitable For Ryobi 18V Batteries, Such As P100 P102 P103 P104 P105 P107 P108 P109 Li-Ion & Ni-Cd Batteries, Etc..
Features
- Upgraded Design for Security Use- Equipped with the all-in-one fuse and on/off switch device, which allows you to easily connect and disconnect the power and battery, ensure security use.
- Wide compatibility - Perfectly suitable for Ryobi 18v batteries, such as P100 P102 P103 P104 P105 P107 P108 P109 Li-ion & Ni-CD batteries, etc.
- Easy to Set up - Only need to slide in the adapter into the battery groove, then push converter and make sure it has locked the battery. Quick-connect terminals are ideal for high-power hardware use. You can complete the installation in 1minute. Remove adapter just need to press the battery snap button to pull out the adapter.
- Multiple Application - The power wheels battery adapter is designed with 14AWG Wire, Maximum permissible current 30A. You can use it to upgrade your power wheels, also a nice way to use your 18 volt batteries for DIY projects, such as connected them to LED Lights, water pump, RC toys, work lights or Robotics etc. Greatly improve the convenience of your life.
- Important Notes - 1. The power wheel adapter is NOT a battery charger, it only outputs directly the voltage and power from your battery. 2. The red wire is connected to the positive terminal, black wire is connected to the negative terminal. 3. If not used for a long time, please be sure to remove the battery form the adapter.
- See more on Amazon...
Brand: Anztek
See On Amazon #27
Tool Holder for Milwaukee M12 Tool Hanger 12V Dril Holders Mount, Power Tool Storage (4 PCS)
Asin: B09TKWRCKD | Ean: 0721927908346 | UPC: 721927908346
These M12 Tool Holders Are Injection Molded With Abs Plastic Not 3D Plastic Printed. They Weren't Hollow, And You Won't Find Out The Weak Layering With The 3D Printed.
Package Include: 4Pcs Holders, 12Pcs Screws. 100% Customer Satisfaction. If In Any Case, You Are Unhappy With Your Purchase, Please Let Us Know, We Will Try Our Best To Reply You A Completely Satisfying Solution..
Mounting Your Tool Takes Only A Few Minute, Has A Very Strong Stability. Compact For Organized Installations, You Can Mount Anywhere For Wall, Or Other Flat Surface..
Our Tool Mounts Are Perfect For Your Tool Trailer, Bench, Garage, Workshop. Simply Slide Your Power Tool Onto The Tool Holder And Twist It To Lock..
Features
- Our Tool Holders are customized for the Milwaukee M12 12V tools, and work perfect for getting organized.
- Our Tool Mounts are perfect for your tool trailer, bench, garage, workshop. Simply slide your power tool onto the tool holder and twist it to lock.
- These M12 tool holders are injection molded with ABS plastic not 3D plastic printed. They weren't hollow, and you won't find out the weak layering with the 3D printed
- Mounting your tool takes only a few minute, has a very strong stability. Compact for organized installations, you can mount anywhere for wall, or other flat surface.
- Package include: 4pcs holders, 12pcs screws. 100% customer satisfaction. If in any case, you are unhappy with your purchase, please let us know, we will try our best to reply you a completely satisfying solution.
- See more on Amazon...
Brand: Anztek | Manufacturer: Anztek
See On Amazon #28
Power Wheels Battery Adapter for Makita 18V Battery & Belt Battery Adapter, for Makita 18V Battery to for Makita 18V Cordless Power Tools
Asin: B0CNJXR1VF
【2 Adaptation Ports】The 2 Practical Ports Are Used To Connect The Battery And Cordless Power Tools Respectively. One End Is Worked For Makita 18V Battery And The Other End Is Used To Connect For Makita 18V Power Tools. (Batteries And Tools Are Not Included).
【Warm Customer Service】If You Don’T Use It For A Long Time, Please Be Sure To Remove The Battery And Tool From The Adapter. We Provide 12-Month Warranty For The Belt Adapter. And Our Service Team Is Available 24/7. If You Have Any Questions About Our Products, Please Contact Us Directly To Solve..
【Wide Applications】Suitable For Makita 18V Batteries, Such As Bl1830 Bl1840 Bl1850 Bl1860 Bl1840b Bl1850b Bl1860b Bl1820 And Etc. Connect For Makita 18V Tools, Widely Used In Industrial, Construction Field, Furniture Repair, Home Improvement, Etc..
【Belt Battery Adapter】The Belt Adapter Is Used To Separate The Battery From The Cordless Power Tools When Working. Wearing The Battery On Your Belt, To Reduce The Weight Lifting Burden Of The Cordless Tools, Which Allows You To Work More Effortlessly And Comfortably. (Batteries And Tools Are Not Included).
Features
- Power Wheels Battery Adapter The Power Wheels Battery Adapter works with for Makita 18V Lithium-Ion battery. Easy to install, locks on you battery very well.
- Belt Battery Adapter The belt adapter is used to separate the battery from the cordless power tools when working. Wearing the battery on your belt, to reduce the weight lifting burden of the cordless tools, which allows you to work more effortlessly and comfortably. (Batteries and tools are not included)
- 2 Adaptation Ports The 2 practical ports are used to connect the battery and cordless power tools respectively. One end is worked for Makita 18V battery and the other end is used to connect for Makita 18V power tools. (Batteries and tools are not included)
- Wide Applications Suitable for MAKITA 18V batteries, such as BL1830 BL1840 BL1850 BL1860 BL1840B BL1850B BL1860B BL1820 and etc. Connect for MAKITA 18V tools, widely used in Industrial, Construction field, Furniture Repair, Home Improvement, etc.
- Warm Customer Service If you don t use it for a long time, please be sure to remove the battery and tool from the adapter. We provide 12-month warranty for the belt adapter. And our service team is available 24/7. If you have any questions about our products, please contact us directly to solve.
- See more on Amazon...
Brand: Anztek
See On Amazon #29
Power Wheels Battery Adapter for Milwaukee M18 18V Battery & Belt Battery Adapter, for Milwaukee M18 18V Battery to for Milwaukee M18 18V Cordless Power Tools
Asin: B0CNJMZLKV
【2 Adaptation Ports】The 2 Practical Ports Are Used To Connect The Battery And Cordless Power Tools Respectively. One End Is Worked For Milwaukee M18 18V Battery And The Other End Is Used To Connect For Milwaukee M18 18V Power Tools. (Batteries And Tools Are Not Included).
【Warm Customer Service】If You Don’T Use It For A Long Time, Please Be Sure To Remove The Battery And Tool From The Adapter. We Provide 12-Month Warranty For The Belt Adapter. And Our Service Team Is Available 24/7. If You Have Any Questions About Our Products, Please Contact Us Directly To Solve..
【Wide Applications】Suitable For Milwaukee M18 18V Batteries, Such As 48-11-1880 / 48-11-1862 / 48-11-1852 / 48-11-1820 / 48-11-1865 / 48-11-1850 / 48-11-1860 And Etc. Connect For Milwaukee 18V Tools, Widely Used In Industrial, Construction Field, Furniture Repair, Home Improvement, Etc..
【Belt Battery Adapter】The Belt Adapter Is Used To Separate The Battery From The Cordless Power Tools When Working. Wearing The Battery On Your Belt, To Reduce The Weight Lifting Burden Of The Cordless Tools, Which Allows You To Work More Effortlessly And Comfortably. (Batteries And Tools Are Not Included).
Features
- Power Wheels Battery Adapter The Power Wheels Battery Adapter works with for Milwaukee M18 18V Lithium-Ion battery. Easy to install, locks on you battery very well.
- Belt Battery Adapter The belt adapter is used to separate the battery from the cordless power tools when working. Wearing the battery on your belt, to reduce the weight lifting burden of the cordless tools, which allows you to work more effortlessly and comfortably. (Batteries and tools are not included)
- 2 Adaptation Ports The 2 practical ports are used to connect the battery and cordless power tools respectively. One end is worked for Milwaukee M18 18V battery and the other end is used to connect for Milwaukee M18 18V power tools. (Batteries and tools are not included)
- Wide Applications Suitable for Milwaukee M18 18V batteries, such as 48-11-1880 / 48-11-1862 / 48-11-1852 / 48-11-1820 / 48-11-1865 / 48-11-1850 / 48-11-1860 and etc. Connect for Milwaukee 18V tools, widely used in Industrial, Construction field, Furniture Repair, Home Improvement, etc.
- Warm Customer Service If you don t use it for a long time, please be sure to remove the battery and tool from the adapter. We provide 12-month warranty for the belt adapter. And our service team is available 24/7. If you have any questions about our products, please contact us directly to solve.
- See more on Amazon...
Brand: Anztek
See On Amazon