Arnos - Buying Guide
Last Updated: 05/03/2024
Share on
Bestselling from Arnos on Amazon
- Hang-A-Plan, 30-36 Inches Quickfile Hanging Clamp, Black, Holds up to 150 Plans, Pack of 5 Clamps
- Arno 467894 Solid Steel French Timber Framing Slick Chisel 20 mm (3/4 Inch) Wide x 10-1/2 Inches Lon...
- Arno 467849 Solid Steel French Timber Framing Slick Chisel 5 Piece Set with 20, 25, 30, 35 and 40 mm...
- Arno 467870 Solid Steel French Timber Framing Slick Chisel 30 mm (1-1/8 Inch) Wide x 14 Inches Long ...
- Arno 467887 Solid Steel French Timber Framing Slick Chisel 25 mm (1 Inch) Wide x 12 Inches Long RC 5...
- Hang-A-Plan, 24 Inches General Hanging Clamp, Silver, Holds up to 150 Plans, Single Clamp
- Hang-A-Plan, 18 Inch Quickfile Hanging Clamp, Black, Holds up to 150 Plans, Single Clamp
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Arno 467894 Solid Steel French Timber Framing Slick Chisel 20 mm (3/4 Inch) Wide x 10-1/2 Inches Long RC 58-60 PVC Dipped Handles
Asin: B07J1RJ186 | Model: 467894 | PartNumber: 467894 | Ean: 0700667467894 | UPC: 700667467894
Hardened At The Cutting Edge To 58-60 Rockwell And Left Moderately Hardened At The Ends To Minimize The Danger Of Flying Steel When Struck..
The Cutting Edge Is Ground And Then Sharpened On A Felt Wheel And Ready To Use Without Any Touch Up Needed.
The Handles Are Bent Up A Few Degrees From The Back Of The Chisel Allowing Use As Slicks.
These Chisels Are Made From One Solid Piece Of Forged Steel So Can Stand Up To Extreme Abuse. They Can Be Struck On The Ends With A Hammer And Sustain No Damage..
Features
- Slick is 20 mm wide (3/4") x 10-1/2" long, weighs 12 ounces
- These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
- Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
- The handles are bent up a few degrees from the back of the chisel allowing use as slicks
- The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
- See more on Amazon...
Brand: ARNO | Manufacturer: Arno
See On Amazon #2
Arno 467849 Solid Steel French Timber Framing Slick Chisel 5 Piece Set with 20, 25, 30, 35 and 40 mm Wide Chisels RC 58-60 PVC Dipped Handles
Asin: B07J1BT8MG | Model: 467849 | PartNumber: 467849 | Ean: 0700667467849 | UPC: 700667467849
Hardened At The Cutting Edge To 58-60 Rockwell And Left Moderately Hardened At The Ends To Minimize The Danger Of Flying Steel When Struck..
The Cutting Edge Is Ground And Then Sharpened On A Felt Wheel And Ready To Use Without Any Touch Up Needed.
The Handles Are Bent Up A Few Degrees From The Back Of The Chisel Allowing Use As Slicks.
These Chisels Are Made From One Solid Piece Of Forged Steel So Can Stand Up To Extreme Abuse. They Can Be Struck On The Ends With A Hammer And Sustain No Damage..
Features
- 5 piece set with sizes: 20, 25, 30, 35 and 40 mm, lengths range from 10-1/2 to 14"
- These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
- Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
- The handles are bent up a few degrees from the back of the chisel allowing use as slicks
- The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
- See more on Amazon...
Brand: ARNO | Manufacturer: Arno
See On Amazon #3
Arno 467870 Solid Steel French Timber Framing Slick Chisel 30 mm (1-1/8 Inch) Wide x 14 Inches Long RC 58-60 PVC Dipped Handles
Asin: B07J1CWKMP | Model: 467870 | PartNumber: 467870 | Ean: 0700667467870 | UPC: 700667467870
Hardened At The Cutting Edge To 58-60 Rockwell And Left Moderately Hardened At The Ends To Minimize The Danger Of Flying Steel When Struck..
The Cutting Edge Is Ground And Then Sharpened On A Felt Wheel And Ready To Use Without Any Touch Up Needed.
The Handles Are Bent Up A Few Degrees From The Back Of The Chisel Allowing Use As Slicks.
These Chisels Are Made From One Solid Piece Of Forged Steel So Can Stand Up To Extreme Abuse. They Can Be Struck On The Ends With A Hammer And Sustain No Damage..
Features
- Slick is 30 mm wide (1-1/8") x 14" long, weighs 17 ounces
- These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
- Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
- The handles are bent up a few degrees from the back of the chisel allowing use as slicks
- The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
- See more on Amazon...
Brand: ARNO | Manufacturer: Arno
See On Amazon #4
Arno 467887 Solid Steel French Timber Framing Slick Chisel 25 mm (1 Inch) Wide x 12 Inches Long RC 58-60 PVC Dipped Handles
Asin: B07J1H16SW | Model: 467887 | PartNumber: 467887 | Ean: 0700667467887 | UPC: 700667467887
Hardened At The Cutting Edge To 58-60 Rockwell And Left Moderately Hardened At The Ends To Minimize The Danger Of Flying Steel When Struck..
The Cutting Edge Is Ground And Then Sharpened On A Felt Wheel And Ready To Use Without Any Touch Up Needed.
The Handles Are Bent Up A Few Degrees From The Back Of The Chisel Allowing Use As Slicks.
These Chisels Are Made From One Solid Piece Of Forged Steel So Can Stand Up To Extreme Abuse. They Can Be Struck On The Ends With A Hammer And Sustain No Damage..
Features
- Slick is 25 mm wide (1") x 12" long, weighs 14 ounces
- These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
- Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
- The handles are bent up a few degrees from the back of the chisel allowing use as slicks
- The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
- See more on Amazon...
Brand: ARNO | Manufacturer: Arno
See On Amazon #5
Hang-A-Plan, 24 Inches General Hanging Clamp, Silver, Holds up to 150 Plans, Single Clamp
Asin: B004VV5QJ4 | Model: 290946 | PartNumber: 290946 | Ean: 9313784811207
Save To Up To 80% On Floor Space And Cut Filing And Retrieval Times By Over 75% Compared To Flat Storage System.
24" Size Clamp.
Keeps Plans In Original Condition With No Rolling, Folding Or Adding Strips Or Holes.
Hang A Plan Systems Allow Large Amounts Of Plans To Be Well Organized And Easily Accessed Using Only A Minimal Amount Of Storage Space.
Features
- The General Hanging Clamp will hold 1-150 plans and can be stored on a compatible Hang A Plan Trolley or Wall Rack
- Hang A Plan systems allow large amounts of plans to be well organized and easily accessed using only a minimal amount of storage space
- Save to up to 80% on floor space and cut filing and retrieval times by over 75% compared to flat storage system
- Keeps plans in original condition with no rolling, folding or adding strips or holes
- 24 size clamp
- See more on Amazon...
First Available: 03/29/2011
Brand: Arnos | Manufacturer: Arnos
Dimensions: 0.79 x 24.02 x 3.15 inches | Weight: 0.88 Pounds
See On Amazon #6
Hang-A-Plan, 18 Inch Quickfile Hanging Clamp, Black, Holds up to 150 Plans, Single Clamp
Asin: B07PPL23NP | Model: D203B | PartNumber: D203B | Ean: 9313784818008
Adjustable Quick Release Levers Allow Clamp To Open And Close Much Faster And The Clamp Extension Sheet Quide Makes It Much Easier To Insert A Set Of Plan Into The Clamp.
Keeps Plans In Original Condition With No Rolling, Folding Or Adding Strips Or Holes, 18" Size Clamp.
Save To Up To 80% On Floor Space And Cut Filing And Retrieval Times By Over 75% Compared To Flat Storage System.
Unique Patented Quickfile Hanging Clamps Saves Time With Up To 50% Quicker Filing And Retrieval Of Plans.
Features
- Quickfile Hanging clamps will hold 1-150 plans together, keeping them well organized, quick to access from a compatible Trolley or Wall Rack and easy to transport
- Unique patented Quickfile hanging clamps saves time with up to 50% quicker filing and retrieval of plans
- Adjustable quick release levers allow clamp to open and close much faster and the clamp extension sheet quide makes it much easier to insert a set of plan into the clamp
- Save to up to 80% on floor space and cut filing and retrieval times by over 75% compared to flat storage system
- Keeps plans in original condition with no rolling, folding or adding strips or holes, 18 size clamp
- See more on Amazon...
Brand: Arnos | Manufacturer: Arnos
Dimensions: 3.94 x 18.70 x 1.18 inches | Weight: 1.15 pounds
See On Amazon