BRKRC - Buying Guide
Last Updated: 04/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
BRKRC 26PCS/Set Blue Ball Bearing Kit for Arrma Big Rock Typhon Granite Senton 3s BLX RC Crawler Car Upgrade Parts
Asin: B0BVB7N6FY
Special No Contact Dual Rubber Seals To Seal Out Dirt While Providing Friction Free Performance..
Suit For Arrma Big Rock Typhon Granite Senton 3S Blx Rc Crawler Car..
Synthetic Micro Bearing Grease Ensures That The Bearings Will Run Smooth Throughout Their Lives Without Ever Needing Relubrication..
Engineers Its Bearings To Perfection, Which Ensures A Perfect Fit For Your R/C Vehicle. You Can Expect Longer Runtimes And Faster Acceleration, As Well As Higher Top-End Speeds..
Features
- Make of high Bearing Steel,Deep Groove Ball Bearings.
- Engineers its bearings to perfection, which ensures a perfect fit for your R/C vehicle. You can expect longer runtimes and faster acceleration, as well as higher top-end speeds.
- Special no contact dual rubber seals to seal out dirt while providing friction free performance.
- Synthetic micro bearing grease ensures that the bearings will run smooth throughout their lives without ever needing relubrication.
- Suit for Arrma Big Rock Typhon Granite Senton 3s BLX RC Crawler Car.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Dimensions: 0.20 x 0.79 x 0.79 Inches
See On Amazon #2
BRKRC Carbon Steel 48P 48T/55T Spur Gear for Tra 1/16 E-Revo VXL Slash/Rally 4WD Summit VXL Upgrade (48T)
Asin: B0CLRTFS7Z
Easy To Install, Providing Superior Performance And Stability..
Suit For Tra 1/16 E-Revo Vxl, 1/16 Slash/Rally 4Wd, 1/16 Summit Vxl..
Compared With Other Gear, Good Machining Can Reduce Roughness And Noise, So That The Gear Roll Smoothly..
Upgrade Parts Are Direct Replacements For Stock Components,Additional Parts Are Not Required..
Features
- Made of high quality carbon steel,light weight.
- upgrade parts are direct replacements for stock components,additional parts are not required.
- Easy to install, providing superior performance and stability.
- Compared with other gear, good machining can reduce roughness and noise, so that the gear roll smoothly.
- Suit for Tra 1/16 E-Revo VXL, 1/16 Slash/Rally 4WD, 1/16 Summit VXL.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #3
BRKRC 50T 54T 55T 56T Slipper Clutch 0.8 Pitch Gear Upgrades Part for 1/10 Arrma Granite Senton Vorteks Big Rock 3S/Kraton Outcast 4S 1/8 Typhon 3S (56T)
Asin: B0CRCTMYZM
Great For Replace The Old Or Broken Part.Increase Overall Performance And Durability Of Your Rc Car..
Suit For 1/10 Arrma Granite 3S Senton 3S Vorteks 3S Big Rock 3S Kraton 4S Outcast4s 1/8 Typhon 3S..
Designed And Machined To Reduce Rotating Mass And Increase Acceleration,Allows For Ultimate Speed Run Acceleration..
The Upgrades Part Is Durability,Improves The Overall Performance Of The Rc Car..
Features
- Made of high-quality steel material, Hard anodic oxidation and anti-rust treatment on gear surface, long service life for these gears.
- The upgrades part is durability,improves the overall performance of the rc car.
- Great for replace the old or broken part.Increase overall performance and durability of your RC car.
- Designed and machined to reduce rotating mass and increase acceleration,allows for ultimate speed run acceleration.
- Suit for 1/10 Arrma Granite 3S Senton 3S Vorteks 3S Big Rock 3S Kraton 4S Outcast4S 1/8 Typhon 3S.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #4
BRKRC 22PCS Steel Rubber Sealed Ball Bearing for 1/10 Tenacity DB Pro & MT & SCT & Truggy, Losi Lasernut U4 Upgrade Parts
Asin: B0BW3K21RB
Widespread Bearing,Economic And Standard..
Special No Contact Dual Rubber Seals To Seal Out Dirt While Providing Friction Free Performance..
Less Friction, Higher Speeds And Durability.Easy Installation & Replacement..
Make Of High Bearing Steel,Deep Groove Ball Bearings..
Features
- Suit for 1/10 Tenacity DB Pro & MT & SCT & Truggy, Lasernut U4 RC Crawler Car.
- Make of high Bearing Steel,Deep Groove Ball Bearings.
- Widespread bearing,economic and standard.
- Less Friction, Higher Speeds and Durability.Easy Installation & Replacement.
- Special no contact dual rubber seals to seal out dirt while providing friction free performance.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Weight: 0.10 Pounds
See On Amazon #5
BRKRC 36Pcs Wheel Hubs Axle Rubber Sealed Bearing Kit for Summit E-Revo Slash Rally 1/16 RC Car Model Upgrade Parts
Asin: B0BVBGTQP3
Synthetic Micro Bearing Grease Ensures That The Bearings Will Run Smooth Throughout Their Lives Without Ever Needing Relubrication..
Suit For E-Revo, Slash, Summit, Rally 4X4 1/16 Rc Crawler Car Bearings Upgrade Parts..
Engineers Its Bearings To Perfection, Which Ensures A Perfect Fit For Your R/C Vehicle..
Special No Contact Dual Rubber Seals To Seal Out Dirt While Providing Friction Free Performance..
Features
- Make of high Bearing Steel,Deep Groove Ball Bearings.
- Special no contact dual rubber seals to seal out dirt while providing friction free performance.
- Synthetic micro bearing grease ensures that the bearings will run smooth throughout their lives without ever needing relubrication.
- Engineers its bearings to perfection, which ensures a perfect fit for your R/C vehicle.
- Suit for E-Revo, Slash, Summit, Rally 4x4 1/16 RC Crawler Car Bearings Upgrade Parts.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Weight: 0.06 Pounds
See On Amazon #6
BRKRC 40CR Steel 48P 66T Spur Gear for 1/10 E-Tron Vision GT Sport3 HPI 160204 HPI RS4 Sport 3 Flux RC Car Upgrade
Asin: B0CN38TVXH
Easy To Disassemble And Install, And Directly Replace The Original Damaged Ones..
Suit For 1/10 E-Tron Vision Gt Sport3 Hpi 160204 Hpi Rs4 Sport 3 Flux..
Steel Gear Retrofitting A Good Part Of A Remote Control Vehicle Will Help Improve Its Performance..
Cnc Machined For Precision,Which Is Not Easy To Rust And Break..
Features
- Made of high quality 40CR steel, 36% increase in strength over 45# steel.
- CNC machined for precision,which is not easy to rust and break.
- Easy to disassemble and install, and directly replace the original damaged ones.
- Steel gear retrofitting a good part of a remote control vehicle will help improve its performance.
- Suit for 1/10 E-Tron Vision GT Sport3 HPI 160204 HPI RS4 Sport 3 Flux.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #7
BRKRC Carbon Steel 54T 56T 58T Spur Main Gear 32P 0.8M Gears for 1/10 Tra-xxas Slash Platinum Rustler Stampede 4x4 VXL 2WD Jato Rally E-REVO Summit T-Maxx (58T)
Asin: B0CMPVZFS3
Easy To Disassemble And Install, And Directly Replace The Original Damaged Ones..
Suit For 1/10 Tra-Xxas Slash Platinum Rustler Stampede 4X4 Vxl 2Wd Jato Rally E-Revo Summit T-Maxx..
Steel Gear Set Retrofitting A Good Part Of A Remote Control Vehicle Will Help Improve Its Performance..
Cnc Machined For Precision,Easy Upgrade From The Original Part..
Features
- Made of carbon steel, which is not easy to rust and break.
- CNC machined for precision,Easy upgrade from the original part.
- Easy to disassemble and install, and directly replace the original damaged ones.
- Steel gear set retrofitting a good part of a remote control vehicle will help improve its performance.
- Suit for 1/10 Tra-xxas Slash Platinum Rustler Stampede 4x4 VXL 2WD Jato Rally E-REVO Summit T-Maxx.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #8
BRKRC Steel 32P 5mm Pinion Gear 11T-24T Motor Gears for 1/5 1/6 1/8 1/10 1/14 1/16 1/18 RC Buggy Monster Truck Drift Car Off-Road Crawler Parts (24T)
Asin: B0CTZYH4L8
Metal Construction For Long Time Service, Better Machining Made Less Rough And Noise Than Other Pinions That Make Them Roll Smoothly..
Suit For 1/5 1/6 1/8 1/10 1/14 1/16 1/18 Arrma Tamiya Trax-Xas Axial Hsp Redcat Losi Rc Car Monster Truck Buggy..
The Speed Depends On Your Gear Ration.We Provide 13 Different Teeth Pinion Gear To Make You More Choice In Gear Ration..
Mould:0.8,Tooth Pitch:32 Pitch,Inner Diameter:5Mm,For Motor Shaft Diameter:3.17Mm/5Mm..
Features
- Made of high-strength steel, increased wear resistance and last longer life.
- Mould:0.8,Tooth pitch:32 pitch,Inner Diameter:5mm,For motor shaft diameter:3.17mm/5mm.
- Metal construction for long time service, better machining made less rough and noise than other pinions that make them roll smoothly.
- The speed depends on your gear ration.We provide 13 different teeth pinion gear to make you more choice in gear ration.
- Suit for 1/5 1/6 1/8 1/10 1/14 1/16 1/18 Arrma Tamiya Trax-xas Axial HSP Redcat Losi RC Car Monster Truck Buggy.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #9
BRKRC Steel 32P 5mm Pinion Gear 25T 26T 28T 29T 30T 31T 32T 33T 34T 35T 36T 37T 38T Motor Gears for 1/10 1/8 RC Car Parts (30T)
Asin: B0CRYQX1XV
Metal Construction For Long Time Service, Better Machining Made Less Rough And Noise Than Other Pinions That Make Them Roll Smoothly..
Suit For 1/8 1/10 Arrma Tamiya Trax-Xas Axial Hsp Redcat Losi Rc Car Monster Truck Buggy..
The Speed Depends On Your Gear Ration.We Provide 13 Different Teeth Pinion Gear To Make You More Choice In Gear Ration..
Mould:0.8,Tooth Pitch:32 Pitch,Inner Diameter:5Mm,For Motor Shaft Diameter:5Mm..
Features
- Made of high-strength steel, increased wear resistance and last longer life.
- Mould:0.8,Tooth pitch:32 pitch,Inner Diameter:5mm,For motor shaft diameter:5mm.
- Metal construction for long time service, better machining made less rough and noise than other pinions that make them roll smoothly.
- The speed depends on your gear ration.We provide 13 different teeth pinion gear to make you more choice in gear ration.
- Suit for 1/8 1/10 Arrma Tamiya Trax-xas Axial HSP Redcat Losi RC Car Monster Truck Buggy.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #10
BRKRC Steel Spur Gear 55T/62T 48P Gears for 1/10 Ford Bronco 4-Tec 2.0 Upgrade Parts (55T)
Asin: B0BW87B425
Spur Gear Is High Efficiency, And Can Reduce Unnecessary Energy Loss..
Rc Car Spur Gear Is Suitable For Vehicles With Torques Control Slip Clutch,Replaces Stock Nylon Spur Gear..
The Surface Of Rc Car Spur Gear Is Treated With Anti‑Rust, And High Level Of Simulation Can Improve The Authenticity And Performance Of Rc Car..
Made Of Steel Materials, Which Is Long Service Life..
Features
- Suit for 1/10 Ford Bronco 4-Tec 2.0 Upgrade Parts.
- Made of steel materials, which is long service life.
- Spur Gear is high efficiency, and can reduce unnecessary energy loss.
- The surface of RC Car Spur Gear is treated with anti rust, and high level of simulation can improve the authenticity and performance of RC car.
- RC Car Spur Gear is suitable for vehicles with torques control slip clutch,Replaces stock nylon spur gear.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #11
BRKRC 24PCS Steel Rubber Sealed Ball Bearing Kit for Tamiya Super Clodbuster & Super Clodbuster & Bullhead RC Crawler Car Upgrade Parts
Asin: B0BV5XG19V
Easy Installation & Replacement.Less Friction, Higher Speeds And Durability..
Suit For For Tamiya Super Clodbuster & Super Clodbuster & Bullhead Rc Crawler Car Rc Crawler Car..
Special No Contact Dual Rubber Seals To Seal Out Dirt While Providing Friction Free Performance..
Widespread Bearing,Economic And Standard..
Features
- Make of high Bearing Steel,Deep Groove Ball Bearings.
- Widespread bearing,economic and standard.
- Easy Installation & Replacement.Less Friction, Higher Speeds and Durability.
- Special no contact dual rubber seals to seal out dirt while providing friction free performance.
- Suit for for Tamiya Super Clodbuster & Super Clodbuster & Bullhead RC Crawler Car RC Crawler Car.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Weight: 0.09 Pounds
See On Amazon #12
BRKRC Mod 1.5 8mm Bore Motor Gears 22T-30T Steel Pinion Gear for 1:5 X Maxx 6S / X Maxx 8S / XRT 1/6 8S Monster 4WD 1/10 E-REVO Truck Upgrades (30T)
Asin: B0CQQZZTDV
To Avoid The Esc/Motor Overheat,Please Check The Esc And Motor Temperatures Regularly Throughout The Run After Change The Pinion Gear..
22T 23T 24T 25T 26T 27T 28T 29T 30T Mod 1.5 Pinion Gear Suit For 1/5 1/6 1/10 Scale Vehicles, Or Other Various Applications..
Make Sure The Rc Motor Shaft Have The Same Diameter,Also Make Sure The Spur Gear And Pinion Gear Have The Same Pitch, Otherwise The Teeth Won't Mesh..
The Variety Of Tooth Pinions Allows For More Gear Setups,For Different Racing Track Conditions..
Features
- Made of steel,reusable,easy to install and upgrade.
- The variety of tooth pinions allows for more gear setups,for different racing track conditions.
- To avoid the ESC/motor overheat,please check the ESC and motor temperatures regularly throughout the run after change the pinion gear.
- Make sure the RC motor shaft have the same diameter,Also make sure the spur gear and pinion gear have the same pitch, otherwise the teeth won't mesh.
- 22T 23T 24T 25T 26T 27T 28T 29T 30T Mod 1.5 pinion gear suit for 1/5 1/6 1/10 scale vehicles, or other various applications.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #13
BRKRC Steel 1.5 Mod Xmaxx 24T 25T 26T 27T Pinion Gear M5 Screw 8mm Bore for 1/5 X-MAXX, 1/10 E-REVO RC Buggy Truck Parts (25T)
Asin: B0CH2RM2XJ
24T 25T 26T 27T Standard Gears To Meet Your Variety Of Requirements..
For 1/5 X-Maxx, 1/10 E-Revo Rc Buggy Truck Parts..
Exquisite Workmanship In Use..
Features
- Made of high quality hardened steel.
- Exquisite workmanship in use.
- 24T 25T 26T 27T standard gears to meet your variety of requirements.
- For 1/5 X-MAXX, 1/10 E-REVO RC Buggy Truck Parts.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #14
BRKRC CrMo Steel Mod 1 20T 45T 50T Pinion Motor Gear 8mm Bore for Tra-xxas 1/5 X maxx 8S & XRT 8S & 1/5 Series RC Car Upgrades Part (20T)
Asin: B0CMQDWJDV
Cnc Machined For Precision,Which Is Not Easy To Rust And Break..
Package Include:1Pcs * Motor Gear(20T/45T/50T According To Your Choice).
Easy To Disassemble And Install, And Directly Replace The Original Damaged Ones..
Made Of High Quality Crmo Steel, 36% Increase In Strength Over 45# Steel..
Features
- Gears fit for 1/5 & 1/6 Series RC Car,fit X maxx 8S & 1/6 XRT 8S.
- Made of high quality CrMo steel, 36% increase in strength over 45# steel.
- CNC machined for precision,which is not easy to rust and break.
- Easy to disassemble and install, and directly replace the original damaged ones.
- Package include:1Pcs * Motor Gear(20T/45T/50T according to your choice)
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #15
BRKRC Steel Diff Gear 42T 15T Gearbox Differential Gears Set for Arrma 1/8 Kraton Notorious Outcast Talion 6S BLX Typhon6S TLR 1/7 Fireteam Mojave 6S BLX 4WD
Asin: B0CSN3DBSL
The Upgrades Part Is Strengthening Enough,Improves The Overall Performance Of The Rc Car..
Suit For Arrma Outcast 6S Blx, Kraton 6S Blx, Notorious 6S Blx, Talion 6S Blx, Fireteam 6S Blx, Mojave 6S Blx, Typhon6s Tlr..
The Upgrades Part Set Is Easy To Replace Original Parts, Highly Increase The Strength And Precision..
Specially Designed Strengthening Cut-Outs For Increased Crash Resistance..
Features
- Made from carbon steel for greater strength and stable driving performance.
- Specially designed strengthening cut-outs for increased crash resistance.
- The upgrades part is strengthening enough,improves the overall performance of the rc car.
- The upgrades part set is easy to replace original parts, highly increase the strength and precision.
- Suit for Arrma Outcast 6S BLX, Kraton 6S BLX, Notorious 6S BLX, Talion 6S BLX, Fireteam 6S BLX, Mojave 6S BLX, Typhon6S TLR.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #16
BRKRC Carbon Steel Diff Ring Pinion Gear 32/10T Front Rear Differential Gear Set for 1:5 Maxx 6S / X Maxx 8S / XRT 1/6 8S Monster 4WD Truck Upgrades (Rear Pinion Gear +Diff Ring)
Asin: B0CKL9YCB9
Easy To Install,Replaces Damaged Differential Ring Pinion Gear Parts..
Suit For 1/5 X-Maxx 6S 77076-4, X-Maxx 8S 77086-4, Xrt 8S 78086-4, Xrt 1/6 8S, Xrt 1/6 4Wd..
Fine Workmanship,Improve The Performance Of Your Rc Car..
Module Increase To M1.6, Large Bevel Gear 32T, Front And Rear Small Bevel Gear 10T..
Features
- Made of carbon steel material,solid,can use for a long time.
- Module increase to M1.6, large bevel gear 32T, front and rear small bevel gear 10T.
- Easy to install,replaces damaged differential ring pinion gear parts.
- Fine workmanship,Improve the performance of your RC car.
- Suit for 1/5 X-Maxx 6S 77076-4, X-Maxx 8S 77086-4, XRT 8S 78086-4, XRT 1/6 8S, XRT 1/6 4WD.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Dimensions: 0.41 x 2.09 x 1.80 Inches
See On Amazon #17
BRKRC Steel Diff Gear 10T 43T Front Rear Transmission Differential Gears for 1/8 Scale 4WD Sledge
Asin: B0CGZXMW9C
Precise Data ,Can Perfectly Replace The Original Gear..
The Spiral Cutting Can Minimize Backlash Between Gears And Maximize Tooth Traction With More Surface Area Than Straight-Cut Gears..
These Spiral-Cut 43-Tooth Ring And 10-Tooth Pinion Differential Gear Sets Are Cnc-Machined From A Solid Block Of Steel,Sturdy And Durable..
Suit For 1/8 4Wd Sledge..
Features
- Made of high quality Steel.
- Suit for 1/8 4WD Sledge.
- Precise data ,can perfectly replace the original gear.
- These spiral-cut 43-tooth ring and 10-tooth pinion differential gear sets are CNC-machined from a solid block of steel,sturdy and durable.
- The spiral cutting can minimize backlash between gears and maximize tooth traction with more surface area than straight-cut gears.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon #18
BRKRC 16Pcs Metal Wheel Hubs Axle Sealed Ball Bearing Kit for Tamiya TT-02 1/10 RC Car Truck Upgrade Parts Accessories
Asin: B0BWY9DDG8
Widespread Bearing,Economic And Standard..
Special No Contact Dual Rubber Seals To Seal Out Dirt While Providing Friction Free Performance..
Less Friction, Higher Speeds And Durability..
Make Of High Bearing Steel,Deep Groove Ball Bearings..
Features
- Suit for Tamiya TT-02 & TT-02D & TT-02 RC Crawler Car.
- Make of high Bearing Steel,Deep Groove Ball Bearings.
- Widespread bearing,economic and standard.
- Less Friction, Higher Speeds and Durability.
- Special no contact dual rubber seals to seal out dirt while providing friction free performance.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Weight: 0.05 Pounds
See On Amazon #19
BRKRC 25Pcs Metal Wheel Hubs Axle Blue Sealed Ball Bearing Kit for Redcat Everest Gen7 1/10 RC Racing Car Model Upgrade Parts
Asin: B0BV6JPT8W
Less Friction, Higher Speeds And Durability.Easy Installation & Replacement..
Suit For Redcat Racing Everest Gen7 Sport 1/10 4Wd Rtr Scale Rock Crawler Parts..
Special No Contact Dual Rubber Seals To Seal Out Dirt While Providing Friction Free Performance..
Widespread Bearing,Economic And Standard..
Features
- Make of high Bearing Steel,Deep Groove Ball Bearings.
- Widespread bearing,economic and standard.
- Less Friction, Higher Speeds and Durability.Easy Installation & Replacement.
- Special no contact dual rubber seals to seal out dirt while providing friction free performance.
- Suit for Redcat Racing Everest Gen7 SPORT 1/10 4WD RTR Scale Rock Crawler Parts.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
Weight: 0.09 Pounds
See On Amazon #20
BRKRC 40CR RC Gears Steel 32P 40T 41T 42T 43T 44T Spur Gear for Xpress Execute XM1S 1/10 4WD Mini E-RC Racing Car (40T)
Asin: B0CS5WRZW7
Cnc Machined For Precision,Which Is Not Easy To Rust And Break..
The Speed Depends On Your Gear Ration.We Provide 40T 41T 42T 43T 44T Spur Gear To Make You More Choice In Gear Ration..
Easy To Install,Steel Gear Retrofitting A Good Part Of A Remote Control Vehicle Will Help Improve Its Performance..
Made Of High Quality 40Cr Steel, 36% Increase In Strength Over 45# Steel..
Features
- Suit for Xpress Execute XM1S 1/10 4WD Mini E-RC Racing Car.
- Made of high quality 40CR steel, 36% increase in strength over 45# steel.
- CNC machined for precision,which is not easy to rust and break.
- Easy to install,steel gear retrofitting a good part of a remote control vehicle will help improve its performance.
- The speed depends on your gear ration.We provide 40T 41T 42T 43T 44T spur gear to make you more choice in gear ration.
- See more on Amazon...
Brand: BRKRC | Manufacturer: BRKRC
See On Amazon