Barnes 4WD - Buying Guide
Last Updated: 05/03/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
GM 1 Ton Reamer 7.15 degree (1.5 inch per ft)
Asin: B01MXHMF4Q
This Reamer Will Allow You To Make The Proper 7° Or 1.5" Per Ft Taper In Your Steering Components. This Is Also The Reamer That You Need To Make A Deeper Taper For The Gm High Angle Tie Rod Ends.
Features
- One ton tie rod ends are a great upgrade but usually your pitman arm or knuckles will have to be reamed to accept the larger taper that these tie rod ends require.
- This reamer will allow you to make the proper 7 or 1.5 per ft taper in your steering components. This is also the reamer that you need to make a deeper taper for the GM high angle tie rod ends
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
See On Amazon #2
Barnes 4WD Dual Pull Winch Plate (33 inches)
Asin: B075FCH9R5
Your Rope Will Need To Just Have A Thimble End On It Like The Master Pull Rope In The Picture So That You Can Easily Thread The Rope Through Either Fairlead..
The Winch Pate Is 26" Or 33" Wide And Can Be Easily Adapted To Your Rig..
The Fairlead Mount Are The Common 10" Bolt Pattern And The Winch Bolt Mounting Pattern Is A 10" X 4.5" To Accommodate A Variety Of Winches..
This Is Where The Dual Pull Winch Plate Shines. Our Winch Plate Has Two Openings One On The Front For Vehicle Extraction And One On The Bottom To So You Can Run Your Winch Rope Straight Down To Your Axle..
Features
- More and more rigs are tackling harder obstacles than ever. With today's super flexible suspension systems it is often helpful to "suck down" the front of your rig so that the suspension will not unload on a steep incline.
- This is where the Dual Pull Winch plate shines. Our winch plate has two openings one on the front for vehicle extraction and one on the bottom to so you can run your winch rope straight down to your axle.
- Your rope will need to just have a thimble end on it like the Master Pull rope in the picture so that you can easily thread the rope through either Fairlead.
- The Fairlead mount are the common 10 bolt pattern and the winch bolt mounting pattern is a 10 x 4.5 to accommodate a variety of winches.
- The winch pate is 26 or 33 wide and can be easily adapted to your rig.
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Dimensions: 7.00 x 35.00 x 26.00 Inches
See On Amazon #3
Barnes 4WD Winch Fairlead Mount
Asin: B01N03CYJ3
Want To Add A Led Light Bar Or Some Cube Lights For Night Wheeling? Then Check Out Our New Fairlead Led Mount..
The Barnes 4Wd Winch Fairlead Mount Installs Between The Winch And The Bumper So You Can Mount Your Hawse Or Roller Fairleads..
Features
- The Barnes 4WD Winch Fairlead Mount installs between the winch and the bumper so you can mount your Hawse or roller fairleads.
- The Barnes 4WD Winch Fairlead Mount installs between the winch and the bumper so you can mount your Hawse or roller fairleads.
- Want to add a LED Light Bar or some Cube Lights for night wheeling? Then Check out our new FAIRLEAD LED MOUNT.
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Weight: 4.85 Pounds
See On Amazon #4
Barnes 4WD Dual Pull Winch Plate (26 inches)
Asin: B075F8LNKN
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Weight: 20.22 Pounds
See On Amazon #5
Barnes 4WD WARN 8274 Dual Pull Winch Plate
Asin: B077QTSYHT
Our Winch Plate Has Two Openings One On The Front For Vehicle Extraction And One On The Bottom To So You Can Run Your Winch Rope Straight Down To Your Axle..
This Winch Mount Is Manufactured From 1/4 Inch Steel And Will Ship Bare Steel. *Winch And Fairleads Not Included.
With Today's Super Flexible Suspension Systems It Is Often Helpful To "Suck Down" The Front Of Your Rig So That The Suspension Will Not Unload On A Steep Incline. This Is Where The Dual Pull Winch Plate Shines..
Features
- The Barnes 4WD Warn 8274 Dual Pull Winch Plate was an idea born out of necessity. More and more rigs are tackling harder obstacles than ever.
- With today's super flexible suspension systems it is often helpful to suck down the front of your rig so that the suspension will not unload on a steep incline. This is where the Dual Pull Winch plate shines.
- Our winch plate has two openings one on the front for vehicle extraction and one on the bottom to so you can run your winch rope straight down to your axle.
- This winch mount is manufactured from 1/4 inch steel and will ship bare steel. *WINCH AND FAIRLEADS NOT INCLUDED
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Dimensions: 9.00 x 8.00 x 25.00 inches
See On Amazon #6
Threaded Weld Washer 1/2"-20 6 Pack
Asin: B07KCJ2M44
1018 Steel.
Mig, Tig, And Stick Weld Compatible.
Increase Strength And Durability.
Features
- Convert a drilled hole into a threaded hole
- Increase strength and durability
- 1018 Steel
- Mig, tig, and stick weld compatible
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Dimensions: 2.00 x 6.00 x 2.00 inches | Weight: 0.30 pounds
See On Amazon #7
Barnes 4WD Weld ON Shackle Clevis Mount 1" Thick
Asin: B01N8YH48Q
This Design Also Incorporates Two Beveled Edges On The Base For Maximum Weld Strength. Sold Individually..
This Weld On Clevis Mount Measures 3"Long, 1"Wide, 2" High, And The Bore Is 7/8"..
Features
- If you are looking for a clevis mount that you can rely on you have found it.
- This weld on clevis mount measures 3long, 1wide, 2 high, and the bore is 7/8.
- This design also incorporates two beveled edges on the base for maximum weld strength. Sold individually.
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
See On Amazon #8
Barnes 4WD HMS169zp - 1" to 9/16" HIGH MISALIGNMENT SPACER HEIMS HEIM JOINTS
Asin: B00LPN8BOI
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
See On Amazon #9
Threaded Weld Washer 3/8"-24 6 Pack
Asin: B07KCGSYGK
1018 Steel.
Mig, Tig, And Stick Weld Compatible.
Added Strength And Durability.
Features
- Convert a drilled hole to a threaded
- Added strength and durability
- 1018 steel
- Mig, tig, and stick weld compatible
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Dimensions: 2.00 x 6.00 x 2.00 Inches
See On Amazon #10
JL RUBICON FACTORY BUMPER WINCH MOUNT
Asin: B07NPVT326
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Dimensions: 6.00 x 30.00 x 12.00 Inches
See On Amazon #11
Threaded Weld Washer 5/16"-24 6 Pack
Asin: B07KCGGKC7
1018 Steel.
Increased Strength And Durability.
Features
- Converts drilled hole into a threaded hole.
- Increased strength and durability
- 1018 steel
- See more on Amazon...
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
Dimensions: 2.00 x 6.00 x 2.00 Inches | Weight: 0.30 Pounds
See On Amazon #12
Horizontal Frame Link Bracket 2 5/8" Wide 9/16" Bolt Hole
Asin: B0B7QXMM5C | Model: B4W250897 | PartNumber: B4W250897
Brand: Barnes 4WD | Manufacturer: Barnes 4WD
See On Amazon