CHGJ - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from CHGJ on Amazon
- CHGJ Wiper Arm Puller and Battery Terminal Removal Tool Windshield Wiper Arm Removal Tool
- Exhaust Rubber Hanger,Universal Exhaust Insulator Muffler Hanger,Hole Diameter 0.47Inch,Tailpipe Dam...
- Brake Caliper Piston Rewind Tool and Brake Caliper Hanger Hooks,Car Rear Brake Caliper Tool for Rpla...
- CHGJ 3L Brake Bleed Kit Manual Brake Bleed Fluid Pump and Oil Fill Funnel Kit,with 1-Liter Brake Ven...
- CHGJ Universal 4-Cylinder Carburetor Synchronizer for Motorcycle, Carb Balancer Synchronization Gauge
- CHGJ Inner CV Joint Puller,23" Long 3.8lb Slide Hammer 48mm CV Joint Fork Adapter Attachments | Fron...
- CHGJ Electrical pin Removal Tool kit,Double tip Replacement Terminal Removal Tool,Suitable for AMP,M...
#1
CHGJ Wiper Arm Puller and Battery Terminal Removal Tool Windshield Wiper Arm Removal Tool
Asin: B0C1VHWB33 | Model: CHGJ-00018 | PartNumber: CHGJ-00018 | Ean: 0797439557686 | UPC: 797439557686
【Easy To Use】：Fix The Wiper Arm Puller Tool Base Firmly On The Wiper Arm, Tighten The Knurled Cone To Force The Claw Under The Cable Clamp, And Turn The Central Screw To Lift The Claw From The Terminal To Remove The Wiper Arm..
【Packaging And Service】：1 X Wiper Arm Puller Tool, 1 X Windshield Wiper Arm Removal Tool.We Offer 12 Months Warranty..
【Great Material】: Made Of 45 # Carbon Steel, Strong Metal With Special Heat Treatment Process, High Hardness, Corrosion-Resistant Forged And Heat Treated Steel Jaws.Jaw Opening: 1/16" - 1-1/16" (6-28Mm); Outer Diameter:1-7/8" (48Mm)..
【Multifunction】: Wiper Arm Puller Remove Tool Can Usage To Remove Battery Terminal Clamp Without Damage To Battery Post.It Fit For Many Cars And Light Trucks And Also Be Used For Removing Over Tight Some Alternator Bearings..
Features
- Application Wiper arm puller remove tool can remove bolted-on windshield wiper arms that fit over a tapered spline.
- Multifunction : Wiper arm puller remove tool can usage to remove battery terminal clamp without damage to battery post.It fit for many cars and light trucks and also be used for removing over tight some alternator bearings.
- Easy to Use Fix the wiper arm puller tool base firmly on the wiper arm, tighten the knurled cone to force the claw under the cable clamp, and turn the central screw to lift the claw from the terminal to remove the wiper arm.
- Great Material : Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws.Jaw opening: 1/16 - 1-1/16 (6-28mm); Outer diameter:1-7/8 (48mm).
- Packaging and Service 1 x Wiper arm puller tool, 1 x Windshield wiper arm removal tool.We offer 12 months warranty.
- See more on Amazon...
Brand: CHGJ | Manufacturer: CHGJ
Warranty: One year warranty
See On Amazon #2
Exhaust Rubber Hanger,Universal Exhaust Insulator Muffler Hanger,Hole Diameter 0.47Inch,Tailpipe Damping Hanger (4PCS Black)
Asin: B0CBPZTFNQ | Ean: 0712746401941 | UPC: 712746401941
【Material】：Made Of Epdm Rubber. Wear-Resistant And High-Temperature Resistant.Anti-Aging, Not Easy To Damage.Hardness Of 65, Suitable For Cars Without Modified Exhaust Pipes..
【Satisfied Customer Service】：This Exhaust Rubber Hanger Is Easy To Replace And Can Save You More Time And Money.Any Quality Related Problem In 1 Year, We Will Replace The Fittings For Free Or Refund..
【Dimensions】：4Pcs Set Of Rubber Exhaust Hangerr. Length: 2.87In, Width: 1.85In, Height: 0.78In, Hole Diameter: 0.47In.The Diameter Distance Between The Two Holes Is 1.57In..
【Universal】：This Rubber Exhaust Hanger Fits Most Cars That Use An Easy-To-Replace Hanger System, Consisting Of Two Holes And A Rubber-Lined Insulator Bracket.Most Car Models Require 4 Exhaust Rubber Hangers For The Body.Be Sure To Check The Size And Distance Between The Hooks Before Use To Ensure The Product Is Suitable For Use..
Features
- Function The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe.Reduce the height and contact surface between the exhaust pipe and the vehicle body, solve the problem of abnormal noise and resonance in the car chassis, and maintain the quiet and stable function of the chassis.
- Universal This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket.Most car models require 4 exhaust rubber hangers for the body.Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use.
- Material Made of EPDM rubber. Wear-Resistant and High-Temperature Resistant.Anti-aging, not easy to damage.Hardness of 65, suitable for cars without modified exhaust pipes.
- Dimensions 4PCS Set of Rubber Exhaust Hangerr. Length: 2.87in, Width: 1.85in, Height: 0.78in, Hole Diameter: 0.47in.The diameter distance between the two holes is 1.57in.
- Satisfied Customer Service This exhaust rubber hanger is easy to replace and can save you more time and money.Any quality related problem in 1 year, we will replace the fittings for free or refund.
- See more on Amazon...
Brand: CHGJ | Manufacturer: CHGJ
See On Amazon #3
Brake Caliper Piston Rewind Tool and Brake Caliper Hanger Hooks,Car Rear Brake Caliper Tool for Rplacement of Rear Brake Pads
Asin: B0CP28YP2H | Model: CH-ZDKQ-00001 | PartNumber: CH-ZDKQ-00001 | Ean: 0712746402115 | UPC: 712746402115
【Efficient Tool】:Brake Caliper Compression Tool Can Be Used To Push Back And Forth Brake Pistons, Replace Brake Pads/Discs And Install Brakes.The Distance Between The Adapter Board And The Center Of The Pin Is Approximately 22 Millimeters To 32 Millimeters..
【Satisfied Customer Service】：Any Quality Related Problem In 1 Year, We Will Replace The Fittings For Free Or Refund..
【Easy To Use】:The Car Rear Brake Pad Retraction Tool Is Easy To Use, And There Are Retraction Pistons On Both The Left And Right Threaded Piston Calipers, Making The Operation Simple..
【Applicable】:Brake Piston Wind Back Tool Is Suitable For Most Disc Brake Calipers Installed On Right-Hand Threaded Vehicles, And Is Suitable For Most Domestic And Imported Cars With Right-Hand Threads..
Features
- Superior Material :The brake caliper piston winding tool is made of chrome vanadium steel,which has a long service life, high hardness and is not easy to deform. brake caliper hangers is sturdy and not easily broken.
- Applicable :Brake piston wind back tool is suitable for most disc brake calipers installed on right-hand threaded vehicles, and is suitable for most domestic and imported cars with right-hand threads.
- Efficient Tool :Brake caliper compression tool can be used to push back and forth brake pistons, replace brake pads/discs and install brakes.The distance between the adapter board and the center of the pin is approximately 22 millimeters to 32 millimeters.
- Easy to Use :The car rear brake pad retraction tool is easy to use, and there are retraction pistons on both the left and right threaded piston calipers, making the operation simple.
- Satisfied Customer Service Any quality related problem in 1 year, we will replace the fittings for free or refund.
- See more on Amazon...
Brand: CHGJ | Manufacturer: CHGJ
Warranty: one year warranty
See On Amazon #4
CHGJ 3L Brake Bleed Kit Manual Brake Bleed Fluid Pump and Oil Fill Funnel Kit,with 1-Liter Brake Ventilation, E20 Adapter (45mm) and Adapter (50mm) (3L Brake Bleed Kit)
Asin: B0CJBRDLCX | Model: CH-YHLD-0001 | PartNumber: CH-YHLD-0001 | Ean: 0712746402078 | UPC: 712746402078
【 Quick And Easy Exhaust 】: This Exhaust System Provides Simple And Safe Exhaust For The Vehicle's Braking, Clutch, And Steering. Only Refueling And Pumps. The Adapter Can Be Easily Connected To The Brake Vent Of The Brake System And Can Be Emptied By Pressing The Manual Pump. The Pressure Is Manually Generated By A Manual Pump, So The Valve Can Be Quickly Connected And Emptied..
【Delivery Content】: 1 3L Brake Bleed Kit, 1 1L Suction Tank, 1 Rubber Hose, 1 Chain, 1 Handle Tool, 1 E20 Adapter (45Mm) And Adapter (50Mm), 1 Oil Funnel Kit..
【Oil Fill Funnel Kit】: This Oil Fill Funnel Kit (With Filter) Is Suitable For Different Vehicles And Models, Equipped With An Adjustable Funnel And Accessories, Which Can Stabilize The Funnel And Shake Hands To Effectively Help Replace Engine Lubricating Oil And Brake Fluid..
【Compatible With Most European Cars】: Due To The E20 Adapter (45Mm) And Adapter (50Mm), It Is Suitable For Many European Cars. The Adapter Can Be Easily Replaced Through A Quick Connector, And The Exhaust Pressure Is Manually Established By A Manual Pump. In Addition, The Brake Fluid Exhaust Is Not Only Suitable For Cars, But Also For Homes..
Features
- 3L Manual Brake Bleed Fluid Pump : The 3L Automotive Brake Bleed Kit is made of corrosion-resistant, stable, and waterproof plastic. Due to the brake fluid capacity of 3 liters, the entire system can be flushed in one operation without the risk of oil tank drying.
- Compatible with most European cars : Due to the E20 adapter (45mm) and adapter (50mm), it is suitable for many European cars. The adapter can be easily replaced through a quick connector, and the exhaust pressure is manually established by a manual pump. In addition, the brake fluid exhaust is not only suitable for cars, but also for homes.
- Quick and easy exhaust : This exhaust system provides simple and safe exhaust for the vehicle's braking, clutch, and steering. Only refueling and pumps. The adapter can be easily connected to the brake vent of the brake system and can be emptied by pressing the manual pump. The pressure is manually generated by a manual pump, so the valve can be quickly connected and emptied.
- Oil Fill Funnel Kit : This Oil Fill Funnel Kit (with filter) is suitable for different vehicles and models, equipped with an adjustable funnel and accessories, which can stabilize the funnel and shake hands to effectively help replace engine lubricating oil and brake fluid.
- Delivery Content : 1 3L Brake Bleed Kit, 1 1L suction tank, 1 rubber hose, 1 chain, 1 handle tool, 1 E20 adapter (45mm) and adapter (50mm), 1 oil funnel kit.
- See more on Amazon...
Brand: CHGJ | Manufacturer: CHGJ
Warranty: one year warranty
See On Amazon #5
CHGJ Universal 4-Cylinder Carburetor Synchronizer for Motorcycle, Carb Balancer Synchronization Gauge
Asin: B0BHH7RFNR | Model: XTY-00064 | PartNumber: XTY-00064
【Principle】：Stainless Steel Column Is Used To Replace Highly Toxic Mercury In Balance Instrument. The Stainless Steel Column Will Be Sucked By The Negative Pressure Of The Engine And Float In The Transparent Conduit To Indicate The Balance State..
【Good Customer Service】 : We Aim To Provide Good Quality Product And Sincere Service For Our Customers, If You Have Any Questions About The Product, Please Feel Free To Contact Us We Will Solve It For You ..
【Operation】：Connect The Negative Pressure Interface Of The Engine. If There Is An Idle Speed Sensor, Use A T-Adapter To Connect It. Adjust Under The Idle Speed Range Of The Original Guide Rail To Make The Four Columns Basically Parallel..
【Accurate】：The 4 Column Chgj Will Accurately Balance 2, 3 And 4 Cylinder Carburetor And Fuel Injected Throttle Bodies..
Features
- Packing Synchronizer x 1,Black Rubber Hose (90cm) x 4,Black Rubber Hose (10cm) x 4,Clear Rubber Hose Restrictor (1.5mm) x 4,T-Type Adapter ( 4mm) x 4,Adapter ( 4x5mm) x 4,Adapter ( 4x6mm) x 4,Instructions x 1,Product packaging box x 1.
- Accurate The 4 column CHGJ will accurately balance 2, 3 and 4 cylinder carburetor and fuel injected throttle bodies.
- Principle Stainless steel column is used to replace highly toxic mercury in balance instrument. The stainless steel column will be sucked by the negative pressure of the engine and float in the transparent conduit to indicate the balance state.
- Operation Connect the negative pressure interface of the engine. If there is an idle speed sensor, use a T-adapter to connect it. Adjust under the idle speed range of the original guide rail to make the four columns basically parallel.
- Good Customer Service : We aim to provide good quality product and sincere service for our customers, If you have any questions about the product, please feel free to contact us We will solve it for you .
- See more on Amazon...
Brand: CHGJ | Manufacturer: XiTuanYuan
Dimensions: 3.30 x 12.50 x 5.60 Inches | Weight: 2.30 Pounds
Warranty: One year maintenance
See On Amazon #6
CHGJ Inner CV Joint Puller,23" Long 3.8lb Slide Hammer 48mm CV Joint Fork Adapter Attachments | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021
Asin: B0C9ZYTZG9 | Model: CH-JP-00001 | PartNumber: CH-JP-00001 | Ean: 0712746401880 | UPC: 712746401880
【48Mm Joint Fork】:The U-Shaped Cv Joint Fork Has A 48Mm Opening And 68Mm Depth To Firmly Lock Onto Your Sable Or Taurus Axle Assembly, Making Removal Of Stuck Cv Joints A Cinch,48Mm Are Suitable For Most Vehicle Models And Have A Wide Range Of Uses..
【Packing List】:1 Heavy Duty Slide Hammer;1 48Mm Opening And 68Mm Depth Cv Joint Fork; 1 Manual Puller; 1Pc Nut. We Offer 12 Months Warranty..
【High Quality Materials】:The Product Is Made Of Premium Steel,Heat Treated And Blackened Or Chrome Plated, Each Part Offers Superior Durability And Corrosion Resistance For Long Use..
【Multipurpose Slide Hammer And Puller】:Our Slide Hammer Weighs 3.8 Pounds And Can Provide You With A Straight And Uniform Tension To Avoid Damaging The Axle Components;Its Threading Also Lets You Use It With Other 5/8"-18 Adapters To Deal With Other Makes And Models Or To Handle Other Work Around Your Engine..
Features
- Remove CV Axle Easily :Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
- Multipurpose Slide Hammer And Puller :Our slide hammer weighs 3.8 pounds and can provide you with a straight and uniform tension to avoid damaging the axle components;its threading also lets you use it with other 5/8-18 adapters to deal with other makes and models or to handle other work around your engine.
- 48mm Joint Fork :The U-shaped CV joint fork has a 48mm opening and 68mm depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch,48mm are suitable for most vehicle models and have a wide range of uses.
- High quality materials :The product is made of premium steel,heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long use.
- Packing List :1 heavy duty slide hammer;1 48mm opening and 68mm depth CV joint fork; 1 manual puller; 1pc nut. We offer 12 months warranty.
- See more on Amazon...
Brand: CHGJ | Manufacturer: CHGJ
Weight: 6.90 pounds
Warranty: one year warranty
See On Amazon #7
CHGJ Electrical pin Removal Tool kit,Double tip Replacement Terminal Removal Tool,Suitable for AMP,Metri Pack,Molex Connector,Universal Automotive/Computer Repair Terminal Release Tool Kit
Asin: B0CNPMMBR2 | Model: CH-STDZ-00001 | PartNumber: CH-STDZ-00001 | Ean: 0712746402092 | UPC: 712746402092
【Premium Replaceable Tips】: Crafted From 304 Stainless Steel Using Wire Edm Technology, These Tips Ensure Excellent Dimensional Accuracy, High Elasticity, And Resistance To Deformation, Ensuring Reliable Quality. Further Refined Through Magnetic Deburring And Polishing, These Tips Guarantee Safe And Damage-Free Use On Terminals And Connectors..
【Satisfied Customer Service】: We Offer 12 Months Warranty, Any Questions, Please Feel Free To Contact Us..
【Easy To Use】: The Terminal Pin Removal Tool Is Easy To Use, Just Push And Pull The Terminal Pins With Connector Removal Tool For Removal Effortlessly From The Wire Harness Connectors Without Any Damage..
【Multi-Purpose Pin Extractor】: Equipped With Multiple Replacement Tips,It's Compatible With Various Connectors Including Amp,Delphi And Molex Connector. Freely Switch Between Needle Heads For Convenient And Efficient Use..
Features
- Double tip replacement terminal Design :terminal removal tool kit includes a metal handle and 8 pcs replacement tips,Also includes a hex wrench and Four screws for convenient needle replacement.
- Multi-purpose Pin Extractor : Equipped with multiple replacement tips,it's compatible with various connectors including AMP,Delphi and Molex Connector. Freely switch between needle heads for convenient and efficient use.
- Premium Replaceable Tips : Crafted from 304 stainless steel using Wire EDM technology, these tips ensure excellent dimensional accuracy, high elasticity, and resistance to deformation, ensuring reliable quality. Further refined through magnetic deburring and polishing, these tips guarantee safe and damage-free use on terminals and connectors.
- Easy to Use : The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.
- Satisfied Customer Service : We offer 12 months warranty, any questions, please feel free to contact us.
- See more on Amazon...
Brand: CHGJ | Manufacturer: CHGJ
Warranty: One year warranty
See On Amazon