CNCTOPBAOS - Buying Guide
Last Updated: 04/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
CNCTOPBAOS 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board CNC Router Engraver Milling Machine Controller Board
Asin: B07B3RFNJ7 | Model: 4V | PartNumber: 4V | Ean: 0785004502766 | UPC: 785004502766
♞【Support Motor】Support Xyz Three-Axis Control, Spindle.Support Stepper Motor: 12V, Maximum Current Of 2A Or Less Is Recommended Within 1.5A And Additional Heat. (Any Stepper Motor Nema17,Nema23);Support Spindle: Support 24Vdc Spindle Pwm Speed (0%-100%),Also Support 3-Pin Pwm/Ttl Signal Control Module.
♞【Applications】 The Control Board Can Be Used With The 1310,1610-Pro, 3018,3018-Pro And 3018-Pro Max Etc Engraving Machines..
♞【New Functions】Add 2-Pin Emergency Stop Button Port,Probe Port,Xyz Limit Port And Add The Power Button Switch..
♞【Support Software】Grbl Contol/Candle(3 Axis)/Universal Gcode Sender; Support System: Windows Xp/7/8/10.
Features
- Model Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board; Input voltage: 24VDC
- Support software GRBL Contol/Candle(3 axis)/Universal Gcode Sender; Support System: Windows XP/7/8/10
- Support Motor Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23);Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module
- New functions Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch.
- Applications The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 0.15 Kilograms
See On Amazon #2
CNCTOPBAOS 3D Touch Probe Edge Finder to Find Desktop Center,V5 NPN NO CNC 3D Edge Finder with Tip,Waterproof Anti-roll CNC Probe 6mm Handle Compatible with Mach3,for GRBL CNC Router Machine
Asin: B0BDSDSJF6 | Model: V5 | PartNumber: V5
♞【3 Wires】Npn-No 3 Wires: Red-Vcc (Dc5-24V Power);Yellow: Io/ Signal Output;Black- Gnd(Dcm); Indicator Light: Green Light When Power On, Red Light After Triggering.
♞【Material Of The Stylus】The Probe Tip/Stylus Is Machined From Stainless Steel Up And Down, And The Ball Head Is Made Of Tungsten Steel Ball, Which Has The Advantage Of Wear Resistance.The Concentricity Is Fine-Tuned To Within 0.05 Before Delivery. Please Measure And Adjust It By Yourself After Receiving The Goods. Be Sure To Use Er11 Spring Chucks Of Aaa Or Above, Otherwise The Concentricity Of The Probe Tip Will Be Affected..
♞【Material Of The Probe】The Shell Is Made Of Fine Frosted Black Oxidized Aluminum Alloy With A Flat Surface Anti-Roll Design..
♞【Supported Software】Adapt To Various Control Panels Such As Grbl Control Panel And Mach3..
Features
- Function The DIYO three-coordinate probe can realize quick centering, edge finding, center finding, shape measurement and other functions by connecting the CNC to the knife edge, which greatly;Repeatability Accuracy: 0.01 mm/ 0.0004 in. solves the trouble of positioning the workpiece during the second clamping during the machining process.
- Supported software Adapt to various control panels such as grbl control panel and Mach3.
- 3 wires NPN-NO 3 wires: Red-VCC (DC5-24V power);Yellow: IO/ Signal Output;Black- GND(DCM); Indicator light: green light when power on, red light after triggering
- Material of the probe The shell is made of fine frosted black oxidized aluminum alloy with a flat surface anti-roll design.
- Material of the stylus The probe tip/stylus is machined from stainless steel up and down, and the ball head is made of tungsten steel ball, which has the advantage of wear resistance.The concentricity is fine-tuned to within 0.05 before delivery. Please measure and adjust it by yourself after receiving the goods. Be sure to use ER11 spring chucks of AAA or above, otherwise the concentricity of the probe tip will be affected.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 0.35 pounds
See On Amazon #3
CNCTOPBAOS Output Double Shaft Diameter 14mm Output Shaft 0.55" Dual Shaft Output Length 130mm fit for Worm Reducer Gearbox NMRV030 RV030 Nema23 Stepper Motor with Gaskets S Ring Corner pin
Asin: B09G6JS6LS | Model: RV030-14mm | PartNumber: RV030-14mm
Length: 30Mm (1.18").
Material: High Quality Steel.
Total Length: 130Mm (5.11").
Output Diameter: 14Mm (0.55").
Features
- Fit For Worm Reducer Gearbox NMRV030 NEMA23 Stepper Motor
- Output Diameter: 14mm (0.55)
- Length: 30mm (1.18)
- Total Length: 130mm (5.11)
- Material: High quality steel
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: CNCTOPBAOS
Weight: 0.38 Pounds
See On Amazon #4
CNCTOPBAOS 3Pcs 8x10mm Shaft Coupling Servo/Stepper Motor Jaw Shaft Coupler 8mm to 10mm Aluminum Jaw Spider Plum Coupling D25L30 Connector for 3D Printer/DIY Encoder/CNC Machine
Asin: B082TT7B84 | Model: B23 | PartNumber: B23 | Ean: 0681385631395 | UPC: 681385631395
Material: Aluminum Alloy, Polyurethane; Type: Plum Shaped.
Structure:Jaw / Spider.
The Shaft Couplers Are Mainly Used For Servo Motors, Spindle, Step Motor,3D Printer Etc.
Flexible Or Rigid:Flexible.
Features
- Model Number:8x10-25x30mm
- Flexible or Rigid:Flexible
- Material: Aluminum alloy, polyurethane; Type: Plum shaped
- The shaft couplers are mainly used for servo motors, spindle, step motor,3d printer etc
- Structure:Jaw / Spider
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #5
CNCTOPBAOS NMRV040 Worm Gearbox Speed Reducer Ratio 20:1 RV40 NMRV-040 Metal Gearheads Worm Gear Reducer for Nema34 Stepper Motor Servo Motor NMRV40 (20:1)
Asin: B0B1J1PCSC | Model: NMRV030 | PartNumber: NMRV030
♞【Size】Input Bore Size14mm,0.55" ; Output Bore Size: 18Mm,0.7".
♞【Advantage】Smooth Transmission, Low Noise; The Multi-Faceted Installation;High-Quality Aluminum Alloy Enclosure, Thermal Performance, Large Carrying Capacity..
♞【Suitable Motor】Input Flange Model:Nema34 ; Application:Matched With Nema34 Servo Motor/Nema34 Stepper Motor.
♞【Speed Ratio】20:1.
Features
- Model NMRV040
- Speed Ratio 20:1
- Size Input Bore Size14mm,0.55 ; Output Bore Size: 18mm,0.7
- Suitable motor Input Flange Model:Nema34 ; Application:Matched with Nema34 Servo Motor/Nema34 Stepper Motor
- Advantage Smooth transmission, low noise; The multi-faceted installation;High-quality aluminum alloy enclosure, thermal performance, large carrying capacity.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: CNCTOPBAOS
See On Amazon #6
CNCTOPBAOS 4 Axis USB Mach3 Handwheel Controller Remote Hand Control CNC Handwheel Manual Pulse Generator for CNC Router Lathe Engraving Milling Machine (WHB04B-4)
Asin: B07JN4P3YH | Model: PLCHANDWHEEL | PartNumber: PLCHANDWHEEL | Ean: 0681385631036 | UPC: 681385631036
♞【Advantages】Axis Select Band Switch To Achieve The Electronic Hand Wheel Off And The Corresponding X Y Z A B C Each Axis Function Of The Choice Of Control. The Choice Of The Step Distance Value Is Realized By Selecting The Switching Value Band, Which Is Simple And Convenient..
♞【Application】For Windows: All Mach3 Cnc System,Milling Machine,Carving Machine,Wood Machine And So On. Axis Select Band Switch To Achieve The Electronic Hand Wheel Off And The Corresponding X Y Z A B C Each Axis Function Of The Choice Of Control. The Choice Of The Step Distance Value Is Realized By Selecting The Switching Value Band, Which Is Simple And Convenient..
♞【Lcd Display】Display X Y Z A Axis Of The Mechanical Coordinates And Workpiece Coordinates. Show The Spindle Speed, The Value Of The Feed Rate. Dot Matrix Lcd With Backlight. Axis Selection, Power Band Switch Control..
♞【Technology】100Ppr Manual Pulse Generator Support 10 Macro Function Button..
Features
- Product 4 Axis USB Mach3 Handwheel ; Model: WHB04B-4
- Technology 100PPR manual pulse generator support 10 macro function button.
- Advantages Axis select band switch to achieve the electronic hand wheel off and the corresponding X Y Z A B C each axis function of the choice of control. The choice of the step distance value is realized by selecting the switching value band, which is simple and convenient.
- LCD display Display X Y Z A axis of the mechanical coordinates and workpiece coordinates. Show the spindle speed, the value of the feed rate. Dot matrix LCD with backlight. Axis selection, power band switch control.
- Application For Windows: All Mach3 CNC system,milling machine,carving machine,wood machine and so on. Axis select band switch to achieve the electronic hand wheel off and the corresponding X Y Z A B C each axis function of the choice of control. The choice of the step distance value is realized by selecting the switching value band, which is simple and convenient.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 0.68 Kilograms
See On Amazon #7
CNCTOPBAOS CNC Digital Stepper Motor Driver,DM556S 2-Phase Hybrid Nema23 Stepper Motor Controller,20-50V DC 1A-6A 256 Subdivision for Nema 17,23,24,nema34 Stepper Motor
Asin: B08K8Y1KJ7 | Ean: 0619191730162 | UPC: 619191730162
♞【Applicable Motors】Can Drive 4,6,8-Wire Two-Phase Stepper Motor,Suitable For Nema 17,Nema23,Nema24 And Nema34 Stepper Motor;Automatic Halving Of Current At Rest..
♞【 Application Scenarios 】Suitable For Various Small And Medium-Sized Automated Equipment And Instruments, E.G: Engraving Machines, Marking Machines, Cutting Machines, Carving Machines, Cnc Router Machines , Automatic Assembly Equipment, Etc. The Best Application Effect In Users Expects Small Noise, High -Speed Device.It Is Especially Effective In Applications Where Users Expect Small Noise And High Speed..
♞【Input Voltage】Input Voltage: 20-50V Dc ( It Is Recommended To Use 24V Dc ),Output Peak Current: 1.0A-6A; Impulse Response Frequency Up To 500Khz (Factory Default 200Khz).
♞【256 Subdivision】Users Can Set 200-51200 Within The Arbitrary Subdivision And Rated Current Within The Arbitrary Current Value, To Meet The Needs Of Most Applications. Due To The Use Of Built-In Micro-Subdivision Technology, Even In The Conditions Of Low Subdivision, But Also Can Achieve High Subdivision Effect, Low, Medium And High-Speed Operation Is Very Smooth, Ultra-Low Noise..
Features
- DSP Digital Technology It adopts the latest 32-bit DSP digital processing technology.The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology.The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors.
- 256 Subdivision Users can set 200-51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications. Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
- Applicable motors Can drive 4,6,8-wire two-phase stepper motor,suitable for Nema 17,Nema23,Nema24 and Nema34 Stepper Motor;Automatic halving of current at rest.
- Input Voltage Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; Impulse response frequency up to 500KHz (factory default 200KHz)
- Application Scenarios Suitable for various small and medium-sized automated equipment and instruments, e.g: Engraving Machines, Marking Machines, Cutting Machines, Carving Machines, CNC Router Machines , Automatic Assembly Equipment, etc. The best application effect in users expects small noise, high -speed device.It is especially effective in applications where users expect small noise and high speed.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: CNCTOPBAOS
See On Amazon #8
CNCTOPBAOS 3 Axis GRBL Control Board USB Port CNC Router Controller Board grbl 1.1f with GRBL Offline Controller Remote Hand Control for CNC Engraving Milling Machine Mini DIY 1610 CNC 3018 PRO
Asin: B07D3PRK4M | Ean: 0681385630916 | UPC: 681385630916
♞【Support Software】Grbl Contol/Candle(3 Axis)/Universal Gcode Sender; Support System: Windows Xp/7/8/10.
♞【Offline Controller】It Supports Sd Card And Tf Card At The Same Time, Standard Capacity 1G, (Notebooks Generally Have Sd Card Interface, Copy Files Are Very Convenient).
♞【Support Motor】Support Xyz Three-Axis Control, Spindle.Support Stepper Motor: 12V, Maximum Current Of 2A Or Less Is Recommended Within 1.5A And Additional Heat. (Any Stepper Motor Nema17,Nema23);Support Spindle: Support 24Vdc Spindle Pwm Speed (0%-100%),Also Support 3-Pin Pwm/Ttl Signal Control Module.
♞【New Functions】Add 2-Pin Emergency Stop Button Port,Probe Port,Xyz Limit Port And Add The Power Button Switch..
Features
- Model Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller; Input voltage: 24VDC; Applications The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines.
- New functions Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch.
- Support software GRBL Contol/Candle(3 axis)/Universal Gcode Sender; Support System: Windows XP/7/8/10
- Support Motor Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23);Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module
- Offline Controller It supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient)
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #9
CNCTOPBAOS Nema23 Stepper Motor Planetary Gearbox Speed Reducer 7 arc-min for 8mm Shaft 57mm Motor 3000rpm Gear Reducer Ratio 50:1 IP65 for CNC Router Benchtop Lathe Machine/3D Printer (50:1)
Asin: B0B12FLSJ4 | Model: S12N | PartNumber: S12N
♞【Maximum Radial Force/Torque】400N;Maximum Axial Force/Torque:300N.
♞【Applications】This Planetary Gearbox Is Mainly Used To Reduce Speed And Increase Holding Torque , Widely Applied In Cnc Machine, Such As Engraving Machine, Mill, Lathe, Work Bench, Grinding Machine Etc..
♞【Advantages】Special Grease, Non-Solidifying, Long-Lasting Lubrication,Lifespan Is Around 20000H;High-Precision Gears, Low Noise, Professional Engineers Design, High Hardness, 20Crmnti Steel, Hard Hobbing After Carburizing, Hardness Up To 50 Degrees, Wear-Resistant, No Tooth Chipping.
♞【Backlash Precision】≤ 7 Arcmin ; Full Load Efficiency: ≥ 96% ; Protection Class: Ip65.
Features
- Product Planetary Reducer for Nema23 (Flange=57mm) Stepper Motor.Frame Size: 60 x 60 mm;Adapter motor: for 8mm Shaft Nema 23 Stepper Motor;Gear Ratio: 50:1
- Backlash Precision 7 Arcmin ; Full load efficiency: 96% ; Protection class: IP65
- Maximum radial force/torque 400N;Maximum axial force/torque:300N
- Advantages Special grease, non-solidifying, long-lasting lubrication,lifespan is around 20000h;High-precision gears, low noise, professional engineers design, high hardness, 20CrMnTi steel, hard hobbing after carburizing, hardness up to 50 degrees, wear-resistant, no tooth chipping
- Applications This planetary gearbox is mainly used to reduce speed and increase holding torque , widely applied in CNC machine, such as engraving machine, mill, lathe, work bench, grinding machine etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 2.45 pounds
See On Amazon #10
CNCTOPBAOS Nema23 CNC Stepper Motor 425oz-in 112mm 3A 2.8N.m 1.8 4 Lead Wire for CNC Router Engraving Milling Lathe Machine
Asin: B0774XR6V5 | Model: S23 | PartNumber: S23 | Ean: 0785004502599 | UPC: 785004502599
♞【Size&Current】57X57x112mm ; Rated Current 3A.
♞【Applications】Semiconductor Equipment, Milling Machine, Engraver Machine , Cnc Routers , 3D Printers, Medical Equipment, Industrial Equipment And Automation Devices Etc..
♞【Type】2 Phase Hybrid Stepper Motor With 4 Lead Wires.(1.8 Degree).
♞【High Torque】2.8N.M (425Oz-In) Holding Torque.
Features
- Model 23HS2430
- High Torque 2.8N.m (425oz-in) holding torque
- Size&Current 57x57x112mm ; Rated current 3A
- Type 2 phase Hybrid Stepper Motor with 4 lead wires.(1.8 degree)
- Applications Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Routers , 3D printers, medical equipment, industrial equipment and automation devices etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 0.00 x 2.24 x 0.00 Inches | Weight: 3.84 Pounds
See On Amazon #11
CNCTOPBAOS CNC Rotary Axis 4th Axis with 3 Jaw Chuck,K11-100mm Hollow Shaft Dividing Head Rotational A Axis,with 65mm Tailstock,Reducing Ratio:6:1 for CNC Router Lathe Engraving Milling Machine
Asin: B07B2RTBGZ | Model: K11-100 | PartNumber: K11-100 | Ean: 0785004502728 | UPC: 785004502728
♞【Mt2 Tailstock】Center Height: 65Mm;Total Height: 115Mm 【Reducing Ratio】6:1 (Belt Deceleration Mode) ; Angle: 0.3 ° / Step.
♞【Application】 The Fourth Axis Can Be Used For Three-Dimensional Processing Of Cylinders, Bends And Circles. The Fourth Axis Engraving Machine Can Be Used For Engraving Spirals, Scars, Bamboo Joints, Etc..
♞【Advantages】Rust Proof Coating Process, Stable Chuck Structure, Fine Workmanship, Solid And Practical Jaw, Excellent Process To Maximize Service Life..
♞【Stepper Motor】Nema23 2-Phase Stepper Motor 57X57x76mm 4-Lead; Red Wire=A+;Green Wire=A-;Yellow Wire=B+;Blue Wire=B- Port..
Features
- Rotation 4th Axis Model:K11-100mm; Chuck Type:K11-100mm 3 Jaw Chuck;Inner through hole diameter/shaft hollow diameter is 22mm;Accessories: Set of Anti-claw and wrenches
- Stepper motor Nema23 2-phase stepper motor 57x57x76mm 4-lead; Red wire=A+;Green wire=A-;Yellow wire=B+;Blue wire=B- port.
- MT2 Tailstock Center height: 65mm;Total height: 115mm Reducing ratio 6:1 (belt deceleration mode) ; Angle: 0.3 / step
- Advantages Rust proof coating process, stable chuck structure, fine workmanship, solid and practical jaw, excellent process to maximize service life.
- Application The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #12
CNCTOPBAOS 2 in 1 CNC 3018 Pro with 5.5W 5500mW Module Offline GRBL Controller DIY Mini CNC Router Kit 3 Axis Desktop Acrylic PVC PCB Wood Milling Engraving Machine Limit Switches Emergency Stop
Asin: B09XX76MM9 | Model: 3018 Pro | PartNumber: 3018 Pro
♞【5.5W 5500Mw Module】5.5W 450Nm 12V 3-Pin Pwm Engraver Module【Spindle】 775 Spindle Motor (12-36V) Dc24v:10000R/Min【Stepper Motor】Nema17 Stepper Motor,1.3A,Torque 0.25N.M【Working Area】11.8" X 7.1" X 1.8";Frame Size: 16.53" X13.78" X 10.63" ;Type:Usb Port Mini Desktop Cnc Router.
♞【Main Application】Can Be Engraved Plastic, Leather, Acrylic, Pvc, Pcb, Wood And The Like Material,Also Can Work On Soft Metal Like Copper,Brass,Aluminum And Other Similar Metal Materials, But Can Not Carve Hard Metal, Jade Or Other Very Hard Texture Of The Items..
♞【System Requirements】 Windows Xp Sp3,Win 7,Win 8,Win 10,Win 11 (32/64 Can Be) Linux; Can't Support Apple/Mac Product.♞【Grbl Software】Our Parcel Include A 4G Usb Flash Drive,It Include The Installation Instructions,User Manual And Grbl Software;.
♞【Upgrade 3018 Pro With Xyz Limit Switches & E-Stop】Mini Cnc Machine Small Size, Light Weight, Usb Interface, Grbl Control Systems, Great Cnc Router Machine For Beginers;Upgraded Machine With Emergency Stop Button And Xyz Axis Limit Switches..
Features
- Upgraded 2-in-1 2-in-1 CNC 3018 PRO with 5500mW Module is an upgraded version of 3018 Pro,also comes with an offline controller means no need to connect to a computer,you can manually adjust the X, Y, Z axis positions as the starting point for engraving,and manually open and close the spindle.Note that the PC and offline controller cannot be connected at the same time.
- Upgrade 3018 Pro with XYZ limit switches & E-stop Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;Upgraded machine with emergency stop button and XYZ axis limit switches.
- 5.5W 5500mW Module 5.5W 450nm 12V 3-pin PWM Engraver Module Spindle 775 spindle motor (12-36V) DC24V:10000r/min Stepper Motor Nema17 stepper motor,1.3A,torque 0.25N.m Working area 11.8 x 7.1 x 1.8;Frame size: 16.53 x13.78 x 10.63 ;Type:USB Port mini desktop cnc router
- System requirements Windows XP SP3,Win 7,Win 8,Win 10,Win 11 (32/64 can be) Linux; Can't support Apple/Mac product. GRBL Software Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software;
- Main application Can be engraved plastic, leather, acrylic, pvc, pcb, wood and the like material,also can work on soft metal like copper,brass,aluminum and other similar metal materials, but can not carve hard metal, jade or other very hard texture of the items.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 10.63 x 16.53 x 13.78 Inches
See On Amazon #13
CNCTOPBAOS 2 in 1 4540 CNC Router Engraving Machine,20W Module&500W Spindle Milling Carving Cutting Aluminum,Stainless Steel,Wood,Acrylic,Metal w/Touchscreen Offline Controller/Limit Switches/E-Stop
Asin: B0CMTF29TS
♞【20W Engraving Module】Compressed Spot 20W ; Engraving Accuracy: 0.01Mm ; Optical Power : 5000Mw ; Cutting Depth: 0.11"-0.19"(3-5Mm) ; Wavelength: 450±5Nm; Input: Dc 12V 3A; Adopting Optical Compression Technology,With Small Light Spot,Good Optical Quality,High-Speed Engraving, Good Heat Dissipation,And Long Service Life..
♞【Wide Application】Can Engrave On Stainless Steel,Wood, Mdf, Carbon Fiber, Pcb, Pvc, Leather, Paper, Acrylic, Resin, Ceramic Products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum And So On.This Machine Can Both Carve And Cut.It Can Cut 8-12Mm (0.31"-0.47") Mdf And 5Mm (0.19") Thick Aluminum..
♞【Supported Software&Computer Systems】4540 Cnc Engraving Machine Is Compatible With Grbl Software/Candle And Supports Windows Xp/7/8/10 And Mac Os.The Grbl Control Software In Our Package Supports Nc, Ncc, Ngc, Tag And Other G Files.【Touchscreen Offline Controller】Comes With A 2.8" Touchscreen Lcd Display That's Easy To Read And Use,You Can Control Your Cnc Without Pc.Just Put The Project You Need Inside That Sd Card,And You Can Operate The Engraving Machine Via This Offline Controller..
♞【Larger Engraving Range】Large Mdf Working Table;Working Area:430*390*90Mm (16.93*15.39*3.54 Inches);Overall Size:650*532*320Mm (25.59*20.94*12.60 Inches);The Worktable Has An Accurate Scale Line,Which Is Convenient To Locate And Measure The Size Of The Engraving Material..
Features
- High Speed 500W Spindle The 4540 cnc engraving machine is equipped with 500W 48V 11000rpm spindle (with ER11 collet),which is more powerful and efficient,and can do a variety of drilling and carving operations on various materials such as big wood,can cut stainless steel,aluminum and other metals;Max.Movement Speed:5000mm/min;Speed range:0-11000rpm.
- Larger Engraving range Large MDF working table;Working area:430*390*90mm (16.93*15.39*3.54 inches);Overall Size:650*532*320mm (25.59*20.94*12.60 inches);The worktable has an accurate scale line,which is convenient to locate and measure the size of the engraving material.
- 20W Engraving Module Compressed spot 20W ; Engraving accuracy: 0.01mm ; Optical power : 5000mW ; Cutting depth: 0.11-0.19(3-5mm) ; Wavelength: 450 5nm; Input: DC 12V 3A; Adopting optical compression technology,with small light spot,good optical quality,high-speed engraving, good heat dissipation,and long service life.
- Supported Software&Computer Systems 4540 CNC engraving machine is compatible with GRBL software/Candle and supports Windows XP/7/8/10 and Mac OS.The GRBL Control Software in our package supports Nc, Ncc, Ngc, Tag and other G files. Touchscreen offline controller Comes with a 2.8 Touchscreen LCD Display that's easy to read and use,you can control your CNC without PC.Just put the project you need inside that SD card,and you can operate the engraving machine via this offline controller.
- Wide Application Can engrave on Stainless steel,Wood, MDF, Carbon fiber, PCB, PVC, Leather, Paper, Acrylic, Resin, Ceramic products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum and so on.This machine can both carve and cut.It can cut 8-12mm (0.31-0.47) MDF and 5mm (0.19) thick aluminum.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 34.50 pounds
See On Amazon #14
CNCTOPBAOS 4540 CNC Router Machine,500W Spindle 11000rpm,GRBL 3-Axis Milling Engraving Machine w/Offline Controller/E-Stop/Limit Switches Cutting Carving For Metal Wood Acrylic MDF Nylon Plastic
Asin: B0CLD2HS6Y
♞【Touchscreen Offline Controller】Comes With A 2.8" Touchscreen Lcd Display That's Easy To Read And Use,You Can Control Your Cnc Without Pc.Just Put The Project You Need Inside That Sd Card,And You Can Operate The Engraving Machine Via This Offline Controller..
♞【Wide Application】Can Engrave On Stainless Steel,Wood, Mdf, Carbon Fiber, Pcb, Pvc, Leather, Paper, Acrylic, Resin, Ceramic Products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum And So On.This Machine Can Both Carve And Cut.It Can Cut 8-12Mm (0.31"-0.47") Mdf And 5Mm (0.19") Thick Aluminum..
♞【Easy To Assemble】The Main Components Has Been Pre-Assembled And Can Be Simply Assembled In 15-30 Minutes.The Machine Is Comes With 10Pcs End Mill Bits/Touchscreen Offline Controller/Limit Switches/Probe.The Control Board,Power Supply,Estop,Fixed Heat Sink And Wires Are Integrated Into A Newly Designed Box For Easy And Safe Operation..
♞【Supported Software&Computer Systems】4540 Cnc Engraving Machine Is Compatible With Grbl Software/Candle And Supports Windows Xp/7/8/10.The Grbl Control Software In Our Package Supports Nc, Ncc, Ngc, Tag And Other G Files..
♞【Larger Engraving Range】Large Mdf Working Table;Working Area:430*390*90Mm (16.93*15.39*3.54 Inches);Overall Size:650*532*320Mm (25.59*20.94*12.60 Inches);The Worktable Has An Accurate Scale Line,Which Is Convenient To Locate And Measure The Size Of The Engraving Material..
Features
- High Speed 500W Spindle The 4540 cnc engraving machine is equipped with 500W 48V 11000rpm spindle (with ER11 collet),which is more powerful and efficient,and can do a variety of drilling and carving operations on various materials such as big wood,can cut stainless steel,aluminum and other metals;Max.Movement Speed:5000mm/min;Speed range:0-11000rpm.
- Larger Engraving range Large MDF working table;Working area:430*390*90mm (16.93*15.39*3.54 inches);Overall Size:650*532*320mm (25.59*20.94*12.60 inches);The worktable has an accurate scale line,which is convenient to locate and measure the size of the engraving material.
- Touchscreen offline controller Comes with a 2.8 Touchscreen LCD Display that's easy to read and use,you can control your CNC without PC.Just put the project you need inside that SD card,and you can operate the engraving machine via this offline controller.
- Supported Software&Computer Systems 4540 CNC engraving machine is compatible with GRBL software/Candle and supports Windows XP/7/8/10.The GRBL Control Software in our package supports Nc, Ncc, Ngc, Tag and other G files.
- Wide Application Can engrave on Stainless steel,Wood, MDF, Carbon fiber, PCB, PVC, Leather, Paper, Acrylic, Resin, Ceramic products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum and so on.This machine can both carve and cut.It can cut 8-12mm (0.31-0.47) MDF and 5mm (0.19) thick aluminum.
- Easy to Assemble The main components has been pre-assembled and can be simply assembled in 15-30 minutes.The machine is comes with 10pcs End Mill Bits/Touchscreen Offline Controller/Limit switches/Probe.The control board,power supply,Estop,fixed heat sink and wires are integrated into a newly designed box for easy and safe operation.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 12.60 x 25.60 x 21.00 Inches
See On Amazon #15
CNCTOPBAOS Nema23 Closed Loop Stepper Motor Kit 2N.m 4.2A,Closed-loop Servo Motor 2Nm 76mm,HSS57 Hybrid Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine
Asin: B07235MBM6 | Model: S2N | PartNumber: S2N | Ean: 0785004502063 | UPC: 785004502063
♞【Advantages】Stepper Motor Closed Loop System,Never Lose Step; The Stepper Motor Control Has A New Generation Of 32-Bit Dsp. The Vector Control Technology Can Ensure The Accuracy Of The Motor; Improve Motor Output Torque And Working Speed; Automatic Current Adjustment Based On Load; Pulses Response Frequency Can Reach 200Khz; 16 Kinds Microsteps Choice,Highest 51200Microsteps/Rev..
♞【Widely Used】Closed Loop Stepper System Can Be Applied To All Kinds Small Automatic Equipment And Instrument. Such As Engraving Machine, Special Industrial Sewing Machine, Stripping Machine, Marking Machine, Cutting Machine, Graph Plotter, Cnc Machine, Automatic Assembly Equipment And So On.This Motor Driver Kit Fits All Types Of Machine Load Conditions (Including Pulley And Low Stiffness Pulley) Without Adjusting The Gain Parameters..
♞【More Functions】It Supports Over-Current Protection, Over-Voltage Protection, Position Outside The Tolerance Protection.The Build-In Place In Position And Alarm Output Signal Can Help The Upper Monitor To Monitor And Control,The Function Of Position Ultra Difference Alarm Can Ensure The Machine Work Safely..
♞【Hss57 Driver】2-Phase Hybrid Stepper Servo Driver; Frequency: 0-200Khz; Insulation Resistance: >=500Mω; Voltage: Dc 24-50V Input;.
Features
- Motor specifications Holding Torque: 2N.m; Current: 4.2A; Peak Current: 6A; Phase: 2; Size: 57x57x76mm; Step Angle(degrees): 1.8 degree; Motor Lead Wire: 4-wire; Encoder lines: 1000
- HSS57 Driver 2-Phase Hybrid Stepper Servo Driver; Frequency: 0-200KHz; Insulation resistance: >=500M ; Voltage: DC 24-50V input;
- Advantages Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200microsteps/rev.
- More Functions It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely.
- Widely used Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.This motor driver kit fits all types of machine load conditions (including pulley and low stiffness pulley) without adjusting the gain parameters.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #16
CNCTOPBAOS 4 Axis Milling Machine CNC Controller,1000KHz Offline Standalone PLC,DDCS Expert Motion Control System with MPG Handwheel for CNC Router/Lathe/Engraving Machine/Servo/Stepper Motor
Asin: B099WLXFPS
♞【Compatible G Code】Compatible With Standard G-Code,Support Popular Cad/Cam Software, Such As Artcam, Mastercam, Proe, Jdsoft Surfmill, Aspire, Fusion 360 And So On;.
♞【Applications】The Ddcs Expert Can Be Used For Many Styles And Types Of Cnc Machines. Lathes, Cnc Routers,Pick&Place And Milling Machine, Lathe And Cutters Are Just A Few Examples..
♞【Power Supply】The Power Supply For The Controller Is 24Vdc, Minimum Current Is 0.5A.
♞【Introduction】The Ddcs Expert Numerical Control System Adopts The Arm+Fpga Design Framework. Arm Controls The Human-Computer Interface And Code Analysis And The Fpga Provides The Underlying Algorithms And Creates The Control Pulse. This Guarantees Reliable Control And Easy Operation.The Internal Operating System Is Linux Based..
Features
- Product Model Number:DDCS EXPERT ; 1M Hz output frequency for each axis; 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys
- Introduction The DDCS Expert numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation.The internal operating system is Linux based.
- Compatible G Code Compatible with standard G-code,support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
- Power Supply The Power Supply for the controller is 24VDC, minimum Current is 0.5A
- Applications The DDCS Expert can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine, lathe and cutters are just a few examples.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #17
CNCTOPBAOS CNC 5 Axis MPG Pendant Handwheel,with 15-Pin Connector Emergency Stop,5V 100PPR Hanging Manual Pulse Generator Plug and Play for DDCSV4.1,DDCS EXPERT,DDCS-Expert,CNC Router Machine
Asin: B09WLCLDBJ | Model: PLCHANDWHEEL | PartNumber: PLCHANDWHEEL
♞【High Precision Code Disc】Metal Code Disc Is High Precision, Good Texture.The Scale Of The Fine-Tuning Dial Is Clear And The Rotation Is Stable..
♞【With 15-Pin Plug】It Is Equipped With 15-Pin Plug,Plug And Play,More Convenient Connection,Can Be Directly Connected To Ddcsv4.1 And Ddcs-Expert Controllers For Use..
♞【Support Cnc System】Ddcsv4.1,Ddcs-Expert,Taiwan Pou Yuen M600 M500 M520i T300 Series, Higerman, Hanuc,Gsk,Opened Nc, Knd,Siemens, The Num, Spain Fagor (New, 8055I) And So On..
♞【Required Power】Supply Voltage: Dc5v +/- 5%; Supply Current: ≤80Ma; Output Voltage: ≥2.5V And ≤0.4V; Output Current: <40Ma; Drop/Rise Time: ≤5Ns.
Features
- 5 Axis Pendant Handwheel with Emergency Stop with x1, x10, x100 selectable switches; Axis switch: OFF, X, Y, Z, 4, 5; Answer location frequency: 0-10KHz
- Required Power Supply voltage: DC5V +/- 5%; supply current: 80mA; output voltage: 2.5V and 0.4V; output current: <40mA; drop/rise time: 5ns
- high precision code disc Metal code disc is high precision, good texture.the scale of the fine-tuning dial is clear and the rotation is stable.
- Support CNC system DDCSV4.1,DDCS-Expert,Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC,GSK,opened NC, KND,Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on.
- With 15-pin plug It is equipped with 15-pin plug,plug and play,more convenient connection,can be directly connected to DDCSV4.1 and DDCS-Expert controllers for use.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #18
CNCTOPBAOS 1610 PRO Mini CNC Router Kit,3 Axis Desktop GRBL Control DIY Engraver Engraving Machine,Carving Engrave on Acrylic,PVC,PCB,Plastic,Wood Cutting Milling Machine
Asin: B08D6CYV6G | Model: 3018 | PartNumber: 3018 | Ean: 0619191628285, 0619191628308 | UPC: 619191628308, 619191628285
【Spindle&Stepper Motor】Diameter 45Mm 10000 Rpm Maximum Power 120W; Er11-3.175Mm ( Can Be Replaced 0-7Mm ); Nema17 42 Stepper Motor 1.3A/0.3N.M.
【Grbl Software】Grbl Control (Candle); Parcel Include 1Pcs 4G Usb Flash Drive Which Contains User Manual & Grbl Software.
【Main Application】Can Be Engraved Plastic, Wood, Acrylic, Pvc, Pcb, Wood And The Like Material.Soft Metal Like Copper And Aluminum And Other Materials, But Can Not Carve Hard Metal, Jade Or Other Very Hard Texture Of The Items..
【Working Area】18X10x4.5Cm;Frame Size: 30X26x25cm;Type:Usb Port Desktop Cnc Router【System Requirements】 Windows Xp, Win7,Win8,Win10; Supporting Files:G-Code (.Nc/.Txt/.Tape/.Gcode).
Features
- Upgrade Version 1610 Pro Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;The CNC1610 PRO machine is very easy to install,stable structure,our parcel also include english user manual.
- Working area 18x10x4.5cm;Frame size: 30x26x25cm;Type:USB port Desktop cnc router System requirements Windows XP, win7,win8,win10; Supporting files:G-code (.nc/.txt/.tape/.gcode)
- Spindle&Stepper Motor Diameter 45mm 10000 rpm maximum power 120W; ER11-3.175mm ( can be replaced 0-7mm ); Nema17 42 stepper motor 1.3A/0.3N.m
- Main application Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items.
- GRBL Software GRBL control (candle); Parcel include 1pcs 4G USB flash drive which contains user manual & GRBL software
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #19
CNCTOPBAOS Upgrade 3018 Pro CNC Router Machine Kit,with Limit Switches & Emergency Stop,3018-PRO DIY Mini GRBL Control 3 Axis Milling Machine,Wood Acrylic PVC PCB Engraving Machine
Asin: B09XTKQ9KX
♞【System Requirements】 Windows Xp Sp3,Win 7,Win 8,Win 10 (32/64 Can Be) Linux; Can't Support Apple/Mac Product..
♞【Main Application】Can Be Engraved Plastic, Leather, Acrylic, Pvc, Pcb, Wood And The Like Material,Also Can Work On Soft Metal Like Copper,Brass,Aluminum And Other Similar Metal Materials, But Can Not Carve Hard Metal, Jade Or Other Very Hard Texture Of The Items..
♞【Grbl Software】Our Parcel Include A 4G Usb Flash Drive,It Include The Installation Instructions,User Manual And Grbl Software;.
♞【Working Area】11.8" X 7.1" X 1.8";Frame Size: 16.53" X13.78" X 10.63" ;Type:Usb Port Mini Desktop Cnc Router【Spindle】 775 Spindle Motor (12-36V) Dc24v:10000R/Min【Stepper Motor】Nema17 Stepper Motor,1.3A,Torque 0.25N.M.
Features
- Upgraded 3018 Pro with XYZ limit switches & E-stop Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;Upgraded machine with emergency stop button and XYZ axis limit switches.
- Working area 11.8 x 7.1 x 1.8;Frame size: 16.53 x13.78 x 10.63 ;Type:USB Port mini desktop cnc router Spindle 775 spindle motor (12-36V) DC24V:10000r/min Stepper Motor Nema17 stepper motor,1.3A,torque 0.25N.m
- System requirements Windows XP SP3,Win 7,Win 8,Win 10 (32/64 can be) Linux; Can't support Apple/Mac product.
- GRBL Software Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software;
- Main application Can be engraved plastic, leather, acrylic, pvc, pcb, wood and the like material,also can work on soft metal like copper,brass,aluminum and other similar metal materials, but can not carve hard metal, jade or other very hard texture of the items.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 10.63 x 16.53 x 13.78 Inches
See On Amazon #20
CNCTOPBAOS Nema17 Stepper Motor,78oz-in 48mm 1.8A 1.8degree,2-Phase High Torque Hybrid CNC Stepper Motor,4-Lead Wire for CNC Router XYZ Axis,3D Printer,CNC Machine,Robot,17HS8401 42x42x48mm
Asin: B071P2H1F9 | Model: 17HS8401 | PartNumber: 17HS8401 | Ean: 0785004502025 | UPC: 785004502025
♞【Long Service Life】 The Rotor Surface Is Coated With High-Quality Epoxy Resin Adhesive To Isolate The Adsorbed Burrs On The Rotor Surface. The Magnetic Field Of The Motor Is More Stable, The Torque Is Greater Than That Of Similar Products, The Motor Runs More Quietly And Stably, And The Service Life Is Longer..
♞【Usage Or Application】This Products Are Widely Used In Engraving Machine,3D Printer,Embroidery Machine,Textile Automation,Printing,Packaging And Other Industries Automation Equipment..
♞【Low Noise】The Stepping Motor Is Made Of Solid And Durable Metal. The Perfect Combination Of Rubber And Rotor Makes The Internal Structure More Stable. This Reduces Vibration And Noise When The Engine Is Running..
♞【Advantages】The Coil Of The Motor Is Made Of Pure Copper Enamelled Wire. The Copper Wires Are Evenly Arranged. Long Term Operation Will Not Lead To Problems Such As Excessive Engine Temperature, Reduced Torque And Increased Noise..
Features
- 17HS8401 High torque 78oz-in 52N.cm,size: 42 x 42 x 48 mm; 1.8 degree; Rated current 1.8 A; Wave: single wave; 4-Lead Wire; 2-phase hybrid, shaft diameter 5mm
- Advantages The coil of the motor is made of pure copper enamelled wire. The copper wires are evenly arranged. Long term operation will not lead to problems such as excessive engine temperature, reduced torque and increased noise.
- Long service life The rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface. The magnetic field of the motor is more stable, the torque is greater than that of similar products, the motor runs more quietly and stably, and the service life is longer.
- Low noise The stepping motor is made of solid and durable metal. The perfect combination of rubber and rotor makes the internal structure more stable. This reduces vibration and noise when the engine is running.
- Usage or Application This products are widely used in engraving machine,3D printer,embroidery machine,textile automation,printing,packaging and other industries automation equipment.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 1.89 x 1.65 x 1.65 Inches | Weight: 0.88 Pounds
See On Amazon #21
CNCTOPBAOS CNC 3018 Pro Max 3 Axis Desktop DIY Mini Wood Router Kit Engraver Woodworking PCB PVC Milling Engraving Carving Machine GRBL Control with ER11 Collet (3018 Pro Max)
Asin: B08D2Z87YH | Model: 3018 | PartNumber: 3018 | Ean: 0619191628247 | UPC: 619191628247
♞【Upgraded Grbl1.1 Control Board】Added The Outer Casing,Emergency Stop Button Port,Tool Setting (Probe) Port,X/Y/Z Axis Limit Port And Add The Power Button Switch,And Come With The Fan Port To Force Heat Dissipation,With Enhanced Spindle Drive,Can Support Maximum 20000Rpm Spindle,And Also Can Support 0.5W-20W Module.【Spindle&Stepper Motor】775 Spindle Motor (12-36V) 24V:10000R / Min; Collet: Er11 3.175Mm (Can Be Equipped With 0-7Mm); Nema17 42 Stepper Motor 1.3A/0.25N.M.
♞【Grbl Software】Our Parcel Include A 4G Usb Flash Drive,It Include The Installation Instructions,User Manual And Grbl Software.
♞【Main Application】Can Be Engraved Plastic, Wood, Acrylic, Pvc, Pcb, Wood And The Like Material.Soft Metal Like Copper And Aluminum And Other Materials, But Can Not Carve Hard Metal, Jade Or Other Very Hard Texture Of The Items. If You Have The Module,You Also Can Change The Spindle To A 3-Pins Module,Also Can Carve The Kraft Paper, Wood, Leather(Wallet), Bamboo..
♞【Working Area】30X18x4.5Cm;Frame Size: 42X35x27cm;Type:Usb Port Desktop Cnc Router【System Requirements】Windows Xp / Win 7 / Win 8 / Win 10 / Linux; Can't Support Apple Product ; Supporting Files:G-Code (.Nc/.Txt/.Tape/.Gcode).
Features
- Upgrade Version CNC3018 Pro Max Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual.
- Working area 30x18x4.5cm;Frame size: 42x35x27cm;Type:USB port Desktop cnc router System requirements Windows XP / Win 7 / Win 8 / Win 10 / Linux; Can't support Apple product ; Supporting files:G-code (.nc/.txt/.tape/.gcode)
- Upgraded GRBL1.1 Control Board Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module. Spindle&Stepper Motor 775 spindle motor (12-36V) 24V:10000r / min; Collet: ER11 3.175mm (Can be equipped with 0-7mm); Nema17 42 stepper motor 1.3A/0.25N.m
- Main application Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change the spindle to a 3-pins module,also can carve the kraft paper, wood, leather(wallet), bamboo.
- GRBL Software Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 10.63 x 16.54 x 13.78 inches
See On Amazon #22
CNCTOPBAOS NMRV030 Worm Gear Reducer Speed Ratio 10:1 RV30 NMRV-030 Worm Gearbox Speed Reducer Square Type for Nema23 Stepper Motor/Servo Motor NMRV30 Output Bore/Hole 14mm Shaft
Asin: B09HGH4S3F | Model: 1 | PartNumber: 1
Input Bore Size:11Mm, 0.43" ; Output Bore Size:14Mm, 0.55".
Smooth Transmission, Low Noise; The Multi-Faceted Installation;High-Quality Aluminum Alloy Enclosure, Thermal Performance, Large Carrying Capacity..
Input Flange Model:Nema23 ; Application:Matched With Nema23 Servo/Stepper Motor.
Speed Ratio:10:1.
Features
- Model:NMRV030-10
- Speed Ratio:10:1
- Input Bore Size:11mm, 0.43 ; Output Bore Size:14mm, 0.55
- Input Flange Model:Nema23 ; Application:Matched with Nema23 Servo/Stepper Motor
- Smooth transmission, low noise; The multi-faceted installation;High-quality aluminum alloy enclosure, thermal performance, large carrying capacity.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: CNCTOPBAOS
See On Amazon #23
CNCTOPBAOS 4 Axis Offline Stand Alone CNC Motion Controller System DDCSV3.1,Servo/Stepper Motor Control Replace Mach3 PLC+100PPR MPG Handwheel with E-Stop for CNC Router Engraving Machine
Asin: B07V6XSCW2 | Ean: 0681385631272 | UPC: 681385631272
♞【Brief Technical Feature】16 Photoelectric Isolated Digital Inputs,3 Photoelectric Isolated Digital Outputs ; Analog Spindle Control 0-10V Spindle Control (Can Be Modified As Pwm Output) ; Arm9 Main Control Chip,Fpga Core Algorithm Chip ; Jog Function For Each Axis (Continuous, Step, Defined Distance) ; Customer Can Define The Distance ; Support Npn Type Limited Switch..
♞【Applications】The Ddcv3.1 Can Be Used For Many Styles And Types Of Cnc Machines. Lathes, Cnc Routers,Pick&Place And Milling Machine,Lathe Machine And Cutters Are Just A Few Examples..
♞【Mpg Handwheel】Mpg Resolution:100 Ppr ; Switch:X1,X10,X100,With Emergency Stop,Led Indicator, With 15-Pin Plug,So It's Play And Plug..
♞【Compatible With G Code Set】5 Inches Tft Screen ; Resolution Ratio: 480X272 ; The Highest Output Pulse Per Axis Is 500Khz. This Provides High Control Precision For Stepper Motors And Servo Motors. All Operations Are Controlled By Only 17 Keys And It Supports The Fanuc With High Universality To Be Compatible With G Code Set,With 4G Usb Flash Disk Support For G Code File Input,No Size Limited Of The G-Code File..
Features
- Brief introduction The DDCSV3.1 is a 4 axis motion controller,the highest output pulse per axis is 500KHz.This provides high control precision for stepper motors and servo motors.The DDCS operates as a stand alone system without the need of a computer, and it needs two 24V DC power supplies.
- Compatible with G code set 5 inches TFT Screen ; Resolution ratio: 480x272 ; the highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors. All operations are controlled by only 17 keys and it supports the FANUC with high universality to be compatible with G code set,with 4G USB flash disk support for G code file input,no size limited of the G-code file.
- Brief technical feature 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs ; Analog spindle control 0-10V spindle control (can be modified as PWM output) ; ARM9 main control chip,FPGA core algorithm chip ; Jog function for each axis (continuous, step, defined distance) ; Customer can define the distance ; Support NPN type limited switch.
- MPG Handwheel MPG Resolution:100 PPR ; Switch:X1,X10,X100,with Emergency stop,LED indicator, with 15-pin plug,so it's play and plug.
- Applications The DDCV3.1 can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine,lathe machine and cutters are just a few examples.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #24
CNCTOPBAOS Nema34 Stepper Motor Mounting Bracket,Aluminum Mount Clamp Base Support,86 Stepping Motor Fixed Seat for CNC Router Engraving Milling Machine (86x86x80mm)
Asin: B07FZVFWTH | Ean: 0681385630961 | UPC: 681385630961
Material:Aluminum;Size:86X86x80mm.
Name:Nema34 86Mm Stepper Motor Bracket.
Standard Or Nonstandard:Standard.
Usage:Stepper Motor Bracket Mount Holder Clamp.
Features
- Fit:for Nema34 86 stepper motor
- Usage:Stepper Motor Bracket Mount Holder Clamp
- Material:aluminum;Size:86x86x80mm
- Standard or Nonstandard:Standard
- Name:NEMA34 86mm Stepper Motor bracket
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 3.15 x 0.00 x 3.39 inches | Weight: 1.21 pounds
See On Amazon #25
CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine
Asin: B07B2RX1BK | Ean: 0785004502711 | UPC: 785004502711
♞【Mt2 Tailstock】Center Height: 65Mm;Total Height: 115Mm 【Reducing Ratio】6:1 (Belt Deceleration Mode) ; Angle: 0.3 ° / Step.
♞【Application】 The Fourth Axis Can Be Used For Three-Dimensional Processing Of Cylinders, Bends And Circles. The Fourth Axis Engraving Machine Can Be Used For Engraving Spirals, Scars, Bamboo Joints, Etc..
♞【Advantages】Rust Proof Coating Process,Stable 4 Jaw Chuck Structure,Fine Workmanship,Solid And Practical Jaw, Excellent Process To Maximize Service Life..
♞【Stepper Motor】Nema23 2-Phase 3A Stepper Motor 57X57x76mm 4-Lead Wires: Red Wire=A+;Green Wire=A-;Yellow Wire=B+;Blue Wire=B- Port..
Features
- Rotation 4th Axis Model:K12-100mm; Chuck Type:K12-100mm 4 Jaw Chuck;Inner through hole diameter/shaft hollow diameter is 22mm; with accessories:1 Set of Anti-claw and wrenches
- Stepper motor Nema23 2-phase 3A stepper motor 57x57x76mm 4-lead wires: Red wire=A+;Green wire=A-;Yellow wire=B+;Blue wire=B- port.
- MT2 Tailstock Center height: 65mm;Total height: 115mm Reducing ratio 6:1 (belt deceleration mode) ; Angle: 0.3 / step
- Advantages Rust proof coating process,stable 4 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.
- Application The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #26
CNCTOPBAOS 8mm to 11mm Stepper Motor Shaft Sleeve 8x11mm Bore Adapter Turbine Reducer Shaft Sleeve for RV030 Worm Gear Speed Reduce RV30 NMRV030 Gearbox 0.31inch
Asin: B09G6GW7XF | Model: RV030 | PartNumber: RV030
Inner Diameter: 8Mm; Out Diameter: 11Mm; Length: 20Mm.
Turbine Reducer Shaft Sleeve 8Mm To 11Mm Bore Adapter For Worm Gear Reducer Shaft Sleeve.
Material: High Quality Tool Steel.
Application Size: Stepper Motor 8Mm To 11Mm Bore Adapter.
Features
- Application: RV30 Worm Gear Reducer
- Application size: Stepper motor 8mm to 11mm bore adapter
- Inner diameter: 8mm; Out diameter: 11mm; Length: 20mm
- Material: High quality tool steel
- Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: CNCTOPBAOS
Weight: 0.40 ounces
See On Amazon #27
CNCTOPBAOS Single Axis 3.5A MD430 TB6560 Nema17 Nema23 Stepper Motor Driver Controller Board 16 Microstep 12-34DC for CNC Router Engraving Milling Machine
Asin: B07BRY61XX | Model: MD430 | PartNumber: MD430 | Ean: 0785004502902 | UPC: 785004502902
Microstep:16.
Suitable:Nema17-23 Stepper Motor.
Current:3.5A.
Voltage:12-34Vdc;Support Power Supply:Dc.
Features
- Name:MD430 Low noise of stepper driver;Model Number:MD430 TB6560 Single Axis
- Voltage:12-34VDC;Support Power Supply:DC
- Microstep:16
- Current:3.5A
- Suitable:NEMA17-23 stepper motor
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #28
CNCTOPBAOS 4 Axis USB Mach3 Motion Control Card,Red 4-Axis Linkage MACH3 CNC Controller Board,Stepper Motor Driver Control Card 100KHz 4 Inputs Breakout Board for CNC Router Engraving Machine
Asin: B0CFF4YRBN | Model: D-FDK-R | PartNumber: D-FDK-R
♞【Output Signal Ports】Have 0-10V Signal Output,You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps And Other Device;Support For Connecting Electronic Handwheel;Handwheel Interface: 2*5P Row Needle..
♞【Applications】Cnc Router,Milling Machine,Engraving Machine,Carving Machines,Cutting Industry,Medical Equipment,Industrial Equipment And Automation Devices Etc..
♞【Input Signal Ports】4 General-Purpose Inputs, You Can Connect The Limit Switch, Estop Switch, Probe , Back To Zero And Other Device; Need Use External 24V Dc Power Supply To Isolate Usb And External Port, And To Make The System More Stable..
♞【4 Axis Linkage】Support For 4 Axis Linkage, You Can Connect Four Stepper Motor Drives Or Servo Drives; Maximum Step-Pulse Frequency Is 100Khz,Which Is Suitable For The Servo Or Stepping Motor;One Status Led, Indicate Connection Status On The Board..
Features
- 4 Axis USB Mach3 Control Board USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.As long as Mach3 can run,the control card can be used; Support computer system:Windows XP/7/8.
- 4 Axis Linkage Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;One status LED, indicate connection status on the board.
- Output Signal Ports Have 0-10V signal output,you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;Support for connecting electronic handwheel;Handwheel interface: 2*5P row needle.
- Input Signal Ports 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device; Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
- Applications CNC Router,Milling Machine,Engraving Machine,Carving Machines,Cutting industry,Medical equipment,industrial equipment and automation devices etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #29
CNCTOPBAOS 4.5KW Air Cooled Spindle Motor,CNC Spindle Square Flange High Speed 18000rpm ER32 4 Bearings 220V 300Hz 14A for CNC Router Milling Machine Engrave Wood,PCB,PVC,Stone or Aluminum etc
Asin: B0BQR9DPZK
♞【High Quality Bearings】The Spindle Motor Is Equipped With 4Pcs Bearings, Which Are Characterized By High Precision, High Hardness, Rust Prevention, Durability And Long Service Life..
♞【Main Applications】The Spindle Is Widely Used On Engraving Milling Machine And Can Work On Wood, Aluminum, Stone, Metal, Glass, Pvc Industry.
♞【Er32 Standard Collet】The Collet Is Quenched With Manganese Steel, The Runout Is Less Than 0.002Mm, The Accuracy Is High, The Tool Is Not Easy To Break, The Stability In The Working Process Is Improved, And The Dynamic Balance Technology Can Effectively Reduce The Noise In The Use Process..
♞【Advantages】Aluminum Profile Body, Not Easy To Deform, Anodized Surface Treatment, Shell Not Affected By Time, Fast Heat Dissipation Design, With Its Own Cooling Fan, Good Cooling Effect, And Improved Spindle Life,.
Features
- Technical Parameters Power: 4.5KW; Operating Speed:10-18000rpm; Frequency:300Hz; Voltage:220V; Collet:ER32; Bearings:4pcs bearings; Lubrication: Grease; Current:14A;Runout off: less than 0.01mm
- Advantages Aluminum profile body, not easy to deform, anodized surface treatment, shell not affected by time, fast heat dissipation design, with its own cooling fan, good cooling effect, and improved spindle life,
- High quality bearings The spindle motor is equipped with 4pcs bearings, which are characterized by high precision, high hardness, rust prevention, durability and long service life.
- ER32 standard collet the collet is quenched with manganese steel, the runout is less than 0.002mm, the accuracy is high, the tool is not easy to break, the stability in the working process is improved, and the dynamic balance technology can effectively reduce the noise in the use process.
- Main applications The spindle is widely used on engraving milling machine and can work on Wood, Aluminum, Stone, metal, glass, PVC industry
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Dimensions: 5.00 x 13.50 x 5.00 inches | Weight: 28.00 pounds
See On Amazon #30
CNCTOPBAOS 3" Cross Slide Vise for Mill and Drill Press,3 Inch Cross Sliding Flat Vise,Aluminum Alloy 2 Way Movement X-Y Compound Bench Top Woodworking Clamp for Mini Drilling Milling Machine
Asin: B0CDL43DX9
♞【Material】Equipped With Detachable Rubber Jaw Protective Sleeve,Clamping Is More Stable,Tight,And Anti-Skid; Thickened Aluminum Alloy Base,With Thick And Wear-Resistant Screw Rods,Ensuring High Accuracy And High Hardness In The Smallest Space..
♞【Application】This Cross Slide Vise Is Mainly Suitable For Small Mills And Drilling Machines, And Can Also Be Applied To Other Suitable Machine Tools, Such As Drilling Machine Brackets,Desktop Drilling Machines,Woodworking And Metal Processing Etc..
♞【Hand Wheel】The Force Bar Can Rotate 360 Degrees To Adjust The Width Of The Vise Clamp,And The Handwheel Has A Marked 0.05Mm Increment To Achieve Maximum Accuracy,The Stroke For One Revolution Is 1.5Mm,A Ring=1.5Mm; Equipped With 2 Rotating Crank Handles For Adjusting The Vise From Front To Back And From Left To Right, With Bolt Fixing Slots For Fixing..
♞【Max Jaw Opening】Max Jaw Opening: 2.95"=75Mm; One Round Scale:1.5Mm; Gross Weight Of The Vise: 6.3Lbs=2.9Kg.
Features
- Size&Travel Table length,width,and height: 6.1"x9.05"x5.11"=155x230x130mm; Travel X-axis: 3.14"=80mm; Travel Y-axis: 2.63"=67mm; Base hole spacing: 4.13"=105mm.
- Max jaw opening Max jaw opening: 2.95=75mm; One Round scale:1.5mm; Gross weight of the vise: 6.3LBS=2.9KG
- Material Equipped with detachable rubber jaw protective sleeve,clamping is more stable,tight,and anti-skid; Thickened aluminum alloy base,with thick and wear-resistant screw rods,ensuring high accuracy and high hardness in the smallest space.
- Hand wheel The force bar can rotate 360 degrees to adjust the width of the vise clamp,and the handwheel has a marked 0.05mm increment to achieve maximum accuracy,the stroke for one revolution is 1.5mm,A ring=1.5mm; Equipped with 2 rotating crank handles for adjusting the vise from front to back and from left to right, with bolt fixing slots for fixing.
- Application This cross slide vise is mainly suitable for small mills and drilling machines, and can also be applied to other suitable machine tools, such as drilling machine brackets,desktop drilling machines,woodworking and metal processing etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon