CQRobot - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
CQRobot Ocean: TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.
Asin: B08KXRHK7H | Model: CQRSENTDS01 | PartNumber: CQRSENTDS01
Easy To Use: Arduino Compatible, Simple Connection, Plug And Play Without Soldering..
Note: When Using The Tds Instrument Sensor, The Sensor Probe Is Immersed In Liquid, And The Purchaser Needs To Separate The Sensor Probe Protective Cover To Avoid Incorrect Data Reading And Malfunction..
Used With Ads1115 16-Bit Adc Module (Asin: B08kfz3pvt, Model: Cqrads1115), Compatible With Raspberry Pi Motherboard..
Ac Excitation Source: Effectively Prevent Probe From Polarization, Waterproof Probe..
Features
- Wide Voltage Input: 3.3V to 5.5V. Good Compatibility Output: 0 to 2.3V analog signal output, compatible with 5V or 3.3V controller.
- AC Excitation Source: effectively prevent probe from polarization, Waterproof Probe.
- Easy to Use: Arduino compatible, simple connection, plug and play without soldering.
- Used with ADS1115 16-Bit ADC Module (ASIN: B08KFZ3PVT, Model: CQRADS1115), Compatible with Raspberry Pi Motherboard.
- Note: When using the TDS instrument sensor, the sensor probe is immersed in liquid, and the purchaser needs to Separate the sensor Probe Protective Cover to avoid incorrect data reading and malfunction.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #2
CQRobot JST SM 2.5 mm Pitch 3-Pin JST Connector IC Male Plugs, Female Sockets Housing and Male/Female T-Shaped Crimp Terminal Connector. 50 Sets/400 Pieces JST SM Connector Adapter Cable Assembly.
Asin: B085RC16VK | Model: CQRobot3PJSTSM | PartNumber: CQRobot3PJSTSM
50-Piece Jst Sm 2.5Mm Pitch 3-Pin Female Plug Connector Housing..
50 Sets/400 Pieces Jst Sm 2.5Mm Pitch 3 Pin Jst Male Plug And Female Receptacle Housing, Male/Female T-Crimp Terminal Kit. Packed In A Packaging Box Made Of Pp Material..
150 Stück 2,5 Mm Tonhöhe Jst - Sm Female T-Shaped Crimp Terminal..
150 Pieces 2.5 Mm Pitch Jst-Sm Male T-Shaped Crimp Terminal..
Features
- 50-piece JST SM 2.5mm pitch 3-pin male header connector housing.
- 150 Pieces 2.5 mm pitch JST-SM male T-shaped Crimp Terminal.
- 50-piece JST SM 2.5mm pitch 3-pin female plug connector housing.
- 150 St ck 2,5 mm Tonh he JST - SM female T-shaped Crimp Terminal.
- 50 Sets/400 Pieces JST SM 2.5mm Pitch 3 Pin JST Male Plug and Female Receptacle Housing, Male/Female T-Crimp Terminal Kit. Packed in a packaging box made of PP material.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Dimensions: 2.52 x 3.27 x 3.27 Inches
See On Amazon #3
CQRobot Ocean: 10.525GHz Doppler Effect Microwave Motion Sensor Compatible with Raspberry Pi and Arduino Board. for Industrial, Measurement, Automatic Doors, Sensor Lights, Reversing Radar, etc.
Asin: B089NKGWQQ | Model: CQRSENWB01 | PartNumber: CQRSENWB01
Can Detects Of Non-Living Objects; The Microwave Moves At The Speed Of Light With Great Directionality. Compatible With Raspberry Pi And Arduino Board..
Note: There Are Ultra-High Frequency Mos Devices Inside The Microwave Motion Sensor. If You Try To Use Battery Power To Test During The Test, This Can Avoid The Breakdown Caused By The Static Pressure Difference Between The Power Supply And The Test Device, Such As The Oscilloscope; In Addition, When The Product Is In Use, Please Try To Choose Battery Power Supply To Ensure The Best Detection Effect..
Used In Industrial, Transportation And Civil Applications Such As Measuring, Liquid Levels, Automatic Door Motion Detection, Automatic Washing, Production Line Material Detection And Car Reversing Sensors Etc..
Non-Contact Detection; Adapts To Harsh Environments Without Affecting By Temperature, Humidity, Noise, Airflow, Dust, Light, Etc. Powerful Anti-Rf Interference Capability; Low Output Power, No Harm To Human Body; Long Detection Distance..
Features
- The microwave motion sensor is a microwave moving object detector designed by the principle of Doppler radar. Unlike ordinary infrared detectors, microwave sensors detect the movement of objects by detecting the microwaves reflected by the object. The detection object will not be limited to the human body, but there are many other things.
- Non-contact detection; Adapts to harsh environments without affecting by temperature, humidity, noise, airflow, dust, light, etc. Powerful anti-RF interference capability; Low output power, no harm to human body; Long detection distance.
- Can detects of non-living objects; The microwave moves at the speed of light with great directionality. Compatible with Raspberry Pi and Arduino Board.
- Used in industrial, transportation and civil applications such as measuring, liquid levels, automatic door motion detection, automatic washing, production line material detection and car reversing sensors etc.
- Note: There are ultra-high frequency MOS devices inside the microwave motion sensor. If you try to use battery power to test during the test, this can avoid the breakdown caused by the static pressure difference between the power supply and the test device, such as the oscilloscope; in addition, when the product is in use, Please try to choose battery power supply to ensure the best detection effect.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Dimensions: 0.71 x 4.13 x 2.83 Inches
See On Amazon #4
CQRobot Ocean: Non-Contact Water/Liquid Level Sensor Compatible with Arduino, Raspberry Pi and Other Motherboards. for Industrial Production, Aquarium, Chemical Liquid, Agriculture, Gardening, etc.
Asin: B07ZMHJ6NN | Model: CQRSENYW001 | PartNumber: CQRSENYW001
The Changed Capacitance Signal Is Then Input To The Control Ic For Signal Conversion, Which Converts The Changed Capacitance Into A Change Of A Certain Electrical Signal, And Then A Certain Algorithm Is Used To Detect And Judge The Degree Of This Change. When The Change Exceeds A Certain Amount It Is Considered That The Liquid Level Has Reached The Sensing Point When The Threshold Is Reached..
The Sensor Comes With 2 Dip Switches, The Right Dip Switch Controls The Output Voltage (High Level) Of The Signal Terminal (Green Line); When The Dip Switch Is Dialed Up, The High Level Is 5V; When The Dip Switch Is Facing When Dialing Down, The High Level Is 3.3V. Compatible With Arduino, Raspberry Pi And Other Motherboards..
High Stability, High Sensitivity, Strong Interference Ability, No External Electromagnetic Interference, Special Treatment For Power Frequency Interference And Common Mode Interference, Strong Compatibility, Penetration Of Various Non-Metallic Containers, Such As Plastic, Glass, For Ceramics And Other Containers, The Sensing Distance Can Reach More Than 12Mm; Liquid, Powder, And Particulate Matter Can Be Detected..
The Principle Is To Use The Inductive Capacitance Of Water To Detect Whether There Is Liquid. When There Is No Liquid Close To The Sensor, The Sensor Has A Certain Static Capacitance To The Ground Due To The Existence Of Distributed Capacitance On The Sensor. When The Liquid Level Slowly Rises And Approaches In The Case Of An Inductor, The Parasitic Capacitance Of The Liquid Will Be Coupled To This Static Capacitance, Making The Final Capacitance Value Of The Inductor Larger..
Features
- The CQRobot non-contact liquid level sensor realizes non-contact detection of the liquid level in a closed container. It adopts advanced signal processing technology and high-speed signal processing chip, breaking through the influence of container wall thickness. It is simple to install and easy to use, and can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure airtight containers.
- The principle is to use the inductive capacitance of water to detect whether there is liquid. When there is no liquid close to the sensor, the sensor has a certain static capacitance to the ground due to the existence of distributed capacitance on the sensor. When the liquid level slowly rises and approaches In the case of an inductor, the parasitic capacitance of the liquid will be coupled to this static capacitance, making the final capacitance value of the inductor larger.
- The changed capacitance signal is then input to the control IC for signal conversion, which converts the changed capacitance into a change of a certain electrical signal, and then a certain algorithm is used to detect and judge the degree of this change. When the change exceeds a certain amount It is considered that the liquid level has reached the sensing point when the threshold is reached.
- High stability, high sensitivity, strong interference ability, no external electromagnetic interference, special treatment for power frequency interference and common mode interference, strong compatibility, penetration of various non-metallic containers, such as plastic, glass, For ceramics and other containers, the sensing distance can reach more than 12mm; liquid, powder, and particulate matter can be detected.
- The sensor comes with 2 DIP switches, the right DIP switch controls the output voltage (high level) of the signal terminal (green line); when the DIP switch is dialed up, the high level is 5V; when the DIP switch is facing When dialing down, the high level is 3.3V. Compatible with Arduino, Raspberry Pi and Other Motherboards.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #5
CQRobot Ocean: TCS34725FN RGB Color Sensor Compatible with Raspberry Pi/Arduino/STM32. I2C Interface, Output RGB Data/Light Intensity Table. for Light Test, Phones, Computers, Industries, Lighting.
Asin: B07QLL53CT | Model: AngelTCS34725US | PartNumber: AngelTCS34725US
Outputs Rgb Data Without White Balance. Outputs Light Intensity, Feels The Light Like Human Eyes. Supports Light Intensity Interrupt Output, Programmable Upper And Lower Thresholds. Supports Fill-Light By Onboard Led, Adjustable Brightness By Pwm..
For Medical Health, Fluid And Gas Analysis, Color Temperature Measurement, Backlight Control For Rgb Led, Product Color Verification And Classification, Ambient Light Sensing For Tvs, Cell Phones, Tablets, Printer, Computers And Monitors, Etc..
Onboard Voltage Level Translator, Compatible With 3.3V/5V Operating Voltage. Compatible With Motherboards Such As Raspberry Pi/Arduino/Stm32..
Cqrobot Rgb Color Sensoronboard Tcs34725fn, Embedded Adc, High Sensitivity, Wide Dynamic Range. I2c Communication, Uses A Few Pins. Integrates Ir Blocking Filter, Minimizes The Ir Spectral Component Of The Incoming Light..
Features
- TCS34725FN is a low-cost, cost-effective RGB full-color color recognition sensor. The sensor recognizes the surface color of an object through optical sensing. It supports the three primary colors of red, green, and blue (RGB), supports bright light sensing, and can output the corresponding specific values to help you restore the true colors, and includes an IR blocking filter making it an ideal color sensing solution for use under varied lighting conditions.
- CQRobot RGB Color SensorOnboard TCS34725FN, embedded ADC, high sensitivity, wide dynamic range. I2C communication, uses a few pins. Integrates IR blocking filter, minimizes the IR spectral component of the incoming light.
- Outputs RGB data without white balance. Outputs light intensity, feels the light like human eyes. Supports light intensity interrupt output, programmable upper and lower thresholds. Supports fill-light by onboard LED, adjustable brightness by PWM.
- Onboard voltage level translator, compatible with 3.3V/5V operating voltage. Compatible with motherboards such as Raspberry Pi/Arduino/STM32.
- for Medical Health, Fluid and Gas Analysis, Color Temperature Measurement, Backlight Control for RGB LED, Product Color Verification and Classification, Ambient Light Sensing for TVS, Cell Phones, Tablets, Printer, Computers and Monitors, etc.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #6
CQRobot Ocean: ADS1115 16-Bit Sensor Analog Signal and Digital Signal Acquisition or Conversion ADC Module. 3.3V to 5V, I2C Interface, Compatible with Arduino, Raspberry Pi and Other Motherboards.
Asin: B08KFZ3PVT | Model: CQRADS1115 | PartNumber: CQRADS1115
Ocean: Ads1115 16-Bit Ad Conversion Module Is Specially Designed For Raspberry Pi Compatible With Arduino Series Analog Sensors, Which Greatly Reduces The Difficulty Of Raspberry Pi Main Control Board Compatible With Arduino Series Analog Sensors, Plug And Play, No Soldering, Very Convenient..
One Ad Module Can Read 4 Channels Of Analog Signals. Due To The Onboard I2c Address Selection Switch, It Supports The Cascade Of 2 Ad Modules And Reads 8 Channels Of Analog Signals, Which Is Sufficient To Meet The Needs Of Various Scenarios..
This Module Uses The 16-Bit Adc Chip Ads1115, Which Supports A Wide Voltage Supply From 3.3V To 5V. The Chip Has A Precision Reference Voltage And Programmable Gain Adjustment (Pga), So It Can Be Used For Weak Signals Or Signals With Large Changes. Accurate Acquisition And Conversion, So This Module Is Also Suitable For All Kinds Of Occasions Where The Main Control Board Needs To Accurately Collect Analog Signals..
The Ads1115 16-Bit Ad Conversion Module Can Accurately Collect And Convert Analog Signals. Through This Ad Module, The Raspberry Pi Main Control Board Can Be Very Conveniently Compatible With The Arduino Series Of Analog Sensors, Measure Various Signals, And Perceive This World..
Features
- Raspberry Pi is a common main control board with powerful functions. However, the pins of the Raspberry Pi main control board can only read digital signals. If you need to read the signals of analog sensors or devices, you can only connect an analog-to-digital conversion (ADC) module, which is not convenient to use.
- The ADS1115 16-bit AD conversion module can accurately collect and convert analog signals. Through this AD module, the Raspberry Pi main control board can be very conveniently compatible with the Arduino series of analog sensors, measure various signals, and perceive this world.
- Ocean: ADS1115 16-bit AD conversion module is specially designed for Raspberry Pi compatible with Arduino series analog sensors, which greatly reduces the difficulty of Raspberry Pi main control board compatible with Arduino series analog sensors, plug and play, no soldering, very convenient.
- This module uses the 16-bit ADC chip ADS1115, which supports a wide voltage supply from 3.3V to 5V. The chip has a precision reference voltage and programmable gain adjustment (PGA), so it can be used for weak signals or signals with large changes. Accurate acquisition and conversion, so this module is also suitable for all kinds of occasions where the main control board needs to accurately collect analog signals.
- One AD module can read 4 channels of analog signals. Due to the onboard I2C address selection switch, it supports the cascade of 2 AD modules and reads 8 channels of analog signals, which is sufficient to meet the needs of various scenarios.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 22.00 Grams
See On Amazon #7
CQRobot Ocean: Contact Water/Liquid Level Sensor Compatible with Raspberry Pi/Arduino. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc.
Asin: B07ZMGW3QJ | Model: CQRSENYW002 | PartNumber: CQRSENYW002
This Sensor Probe Is Small In Size And Has A Structure That Can Be Placed Up, Down, Laterally, And Diagonally In Multiple Orientations To Detect Solution Spillage, Dryness And Horizontal Level. Can Be Used As A Reminder And Alarm Function..
Compatible With Arduino Motherboard And Raspberry Pi Motherboard. For Automatic Irrigation Systems, Aquariums, Plants, In The Garden, In Agriculture Etc..
The Sensor Has A Dip Switch. The Dip Switch Controls The Output Voltage (High Level) Of The Signal Terminal (Green Line). When The Dip Switch Is Dialed To 5V, The High Level Is 5V. When The Dip Switch Is Dialed At 3V, The High Level Is 3.3V..
The Sensor Has No Mechanical Parts, Requires No Additional Adjustment, And Has High Sensitivity, Low Power Consumption, Corrosion Resistance, High Pressure Resistance, High Temperature Resistance And Chemical Stability..
Features
- Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications.
- The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability.
- This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function.
- The sensor has a DIP switch. The DIP switch controls the output voltage (high level) of the signal terminal (green line). When the DIP switch is dialed to 5V, the high level is 5V. When the DIP switch is dialed At 3V, the high level is 3.3V.
- Compatible with Arduino motherboard and Raspberry Pi motherboard. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Dimensions: 2.80 x 8.27 x 1.42 Inches
See On Amazon #8
CQRobot Ocean: Temperature and Humidity Sensor Compatible with Raspberry Pi/Arduino Motherboard. Onboard SHT31-DIS-F chip, for Industrial Production, Weather Monitoring, Agricultural Monitoring, etc.
Asin: B08DF7NY4P | Model: CQRSHT31FA | PartNumber: CQRSHT31FA
Sht31-F Is The Standard Version Of The Sht3x Series. It Provides Humidity Accuracy Plus/Minus 2% Rh @ 0%Rh To 100%Rh (At 25 Degree Celsius), And Temperature Accuracy Plus/Minus 0.2 Degree Celsius @ 0℃ To 90 Degree Celsius (Typical)..
It Is Easy To Achieve Precise And High-Reliability Temperature And Humidity Sensing For Urban Environment Monitoring, Intelligent Buildings, Industrial Automation, Smart Home And Other Internet Of Things Applications..
The Sensor Supports I2c Communication, Compatible With 3.3V/5V Controllers, Compatible With Raspberry Pi/Arduino Motherboard..
The Sht31-F Chip Features A Ptfe Membrane Dedicated To Protecting The Sensor Opening From Liquids And Dust According To Ip67. It Thus Allows The Sensor To Work Under Harsh Environmental Conditions, Where Spray Water And High Exposure To Dust Might Be Challenging For Accurate Sensor Performance..
Features
- Temperature and Humidity Sensor Onboard SHT31-DIS-F chip, Offers high reliability and long-term stability with low power consumption, fast response and strong anti-interference ability.
- The SHT31-F chip features a PTFE membrane dedicated to protecting the sensor opening from liquids and dust according to IP67. It thus allows the sensor to work under harsh environmental conditions, where spray water and high exposure to dust might be challenging for accurate sensor performance.
- SHT31-F is the standard version of the SHT3x series. It provides humidity accuracy Plus/Minus 2% RH @ 0%RH to 100%RH (at 25 Degree Celsius), and temperature accuracy Plus/Minus 0.2 Degree Celsius @ 0 to 90 Degree Celsius (typical).
- The sensor supports I2C communication, Compatible with 3.3V/5V controllers, Compatible with Raspberry Pi/Arduino Motherboard.
- It is easy to achieve precise and high-reliability temperature and humidity sensing for urban environment monitoring, intelligent buildings, industrial automation, smart home and other Internet of Things applications.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #9
CQRobot Ocean: TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.
Asin: B083KM51DF | Model: CQRTSL25911 | PartNumber: CQRTSL25911
High Sensitivity Up To 188Ulux, Wide Dynamic Range Up To 600M:1. Embedded Infrared-Responding Photodiode, Allows Precise Measuring Even On Strong Infrared Noise Environment..
Cqrobot Ambient Light Sensor Built-In Tsl25911fn Chip, Onboard Voltage Translator, Compatible With 3.3V/5V Operating Voltage, Compatible With Raspberry Pi, Arduino, Stm32 And Other Motherboards. Adopts Tsl25911fn, Measures Infrared Plus Visible Light. (Wider Range Than Tsl2561).
Embedded Adc, Direct Light Intensity Signal Output To I2c Interface, Less Noise Jamming. Provides Interrupt Output With Programmable Upper And Lower Thresholds..
Two Integrating Adcs Convert The Photodiode Currents Into A Digital Output That Represents The Irradiance Measured On Each Channel. This Digital Output Can Be Input To A Microprocessor Where Illuminance (Ambient Light Level) In Lux Is Derived Using An Empirical Formula To Approximate The Human Eye Response..
Features
- TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit.
- Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
- High sensitivity up to 188uLux, wide dynamic range up to 600M:1. Embedded infrared-responding photodiode, allows precise measuring even on strong infrared noise environment.
- Embedded ADC, direct light intensity signal output to I2C interface, less noise jamming. Provides interrupt output with programmable upper and lower thresholds.
- CQRobot Ambient Light Sensor Built-in TSL25911FN chip, Onboard voltage translator, compatible with 3.3V/5V operating voltage, Compatible with Raspberry Pi, Arduino, STM32 and other motherboards. Adopts TSL25911FN, measures infrared plus visible light. (wider range than TSL2561)
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #10
CQRobot Ocean: VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.
Asin: B07F3TV3G4 | Model: CQRWX00744US | PartNumber: CQRWX00744US
Used In Mobile Robot, Uav, Detection Mode, Camera, Architecture And Lighting, Smart Home, Inventory Management..
Onboard Level Conversion Circuit, Compatible With 3.3V And 5V Working Levels, Compatible With Arduino Motherboard, Raspberry Pi Motherboard And Stm32 Motherboard..
I2c Communication Interface, Control The Module On/Off Via Io Pins..
The Flightsense Sensor Directly Measures The Distance Between The Object And The Sensor Based On The Photon Round-Trip Flight Time. The Measurement Accuracy Is Not Affected By The Surface Characteristics Of The Measured Object, Making The Low-Power High-Precision Ranging And Proximity Detection Function Suitable For A Wider Range Of Applications..
Features
- VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, 4 meters Accuracy, 50Hz Ranging Frequency. The VL53L1X uses ST's latest ToF technology, which integrates physical infrared filters and optical components to provide distance measurement and immunity to interference regardless of target color and reflectivity.
- The FlightSense sensor directly measures the distance between the object and the sensor based on the photon round-trip flight time. The measurement accuracy is not affected by the surface characteristics of the measured object, making the low-power high-precision ranging and proximity detection function suitable for a wider range of applications.
- Used in Mobile Robot, UAV, Detection Mode, Camera, Architecture and Lighting, Smart Home, Inventory Management.
- I2C Communication Interface, Control the module on/off via IO pins.
- Onboard level conversion circuit, compatible with 3.3V and 5V working levels, Compatible with Arduino Motherboard, Raspberry Pi Motherboard and STM32 Motherboard.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #11
CQRobot 3D Printer Grease (15g), Lubricating Plastic and Rubber Products. Suitable for 3D Printers, CPU Fans, Software Optical Drives, Instrumentation, Rolling Bearings and Plain Bearings.
Asin: B0731PJLJZ | Model: AngelFIT0276US | PartNumber: AngelFIT0276US | Ean: 0712104675342 | UPC: 712104675342
Low Density, Fine Grease, Good Lubrication Of Plastic Products And Rubber Products..
Suitable For 3D Printers, Cpu Fans, Software Drives, Instrumentation, Rolling Bearings And Plain Bearings..
It Has Excellent Oxidation Stability, Mechanical Stability, Colloidal Stability And Water Resistance..
Features
- This product is made by fatting acid soap tthickened deeply refined mineral, And add additives to mix.
- It has excellent oxidation stability, mechanical stability, colloidal stability and water resistance.
- Low density, fine grease, good lubrication of plastic products and rubber products.
- Suitable for 3D printers, CPU fans, software drives, instrumentation, rolling bearings and plain bearings.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 0.03 Pounds
See On Amazon #12
CQRobot Ocean: 3D Gesture Sensor Compatible with Raspberry Pi/Arduino/STM32 Motherboard. Built-in PAJ7620U2 chip, Recognise up to 9 Gestures via The I2C Interface. for Smart Home, Robot Interaction.
Asin: B083KNC1LF | Model: CQRPAJ7620U2 | PartNumber: CQRPAJ7620U2
I2c Interface, Requires Only Two Signal Pins To Control..
Compared With Solutions Such As Apds-9960, I Have Faster Recognition Speed, Higher Accuracy, More Gesture Recognition, And Stronger Anti-Interference, Which Is Suitable For Low-Power Application Scenarios Such As Smart Home And Robot Interaction..
Embedded Infrared Led And Optical Lens, Be Able To Work In Low-Light Even Dark Environment..
Based On Paj7620u2 Sensor, Directly Recognises 9 Basic Gestures (Supported Gestures: Up, Down, Left, Right, Forward, Backward, Clockwise, Anticlockwise, Shake), Supports Gesture Interrupt Output..
Features
- Onboard voltage translator, compatible with 3.3V/5V operating voltage, Compatible with Raspberry Pi, Arduino, STM32 and other motherboards.
- Based on PAJ7620U2 sensor, directly recognises 9 basic gestures (Supported gestures: up, down, left, right, forward, backward, clockwise, anticlockwise, shake), supports gesture interrupt output.
- I2C interface, requires only two signal pins to control.
- Embedded infrared LED and optical lens, be able to work in low-light even dark environment.
- Compared with solutions such as APDS-9960, I have faster recognition speed, higher accuracy, more gesture recognition, and stronger anti-interference, which is suitable for low-power application scenarios such as smart home and robot interaction.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #13
CQRobot Ocean: 381:1 Metal DC Geared-Down Motor 37Dx75L mm 6V/12V, with 64 CPR Encoder and Bracket. 6V-3W-14RPM-57 kg.cm(769 oz.in), 12V-6W-28RPM-70 kg.cm(973 oz.in), D-Shaped Output Shaft 16mm.
Asin: B08ZK773S5 | Model: CQR37D12V64EN-Q | PartNumber: CQR37D12V64EN-Q
No-Load Speed: @ 6V: 14 Rpm, @ 12V: 28 Rpm;.
For Projects Such As Robots, Measuring Devices, Medical Equipment, Smart Balance Car, Rc Car Model, Smart Home Appliance, Custom Servo, Diy Engine Toy. Compatible With Arduino Motherboards..
Stall Torque: @ 6V: 57 Kg.Cm (769 Oz.In), @ 12V: 70 Kg.Cm (973 Oz.In);.
Max Power: @ 6V: 3 W, @ 12V: 6 W;.
Features
- 6V or 12V 381:1 Metal DC Geared-Down Motor 37Dx75L mm, with 64 CPR Encoder and Metal Mounting Bracket Kit, D-shaped Output Shaft 6mm Diameter and Long 16mm;
- Max Power: @ 6V: 3 W, @ 12V: 6 W;
- No-load Speed: @ 6V: 14 RPM, @ 12V: 28 RPM;
- Stall Torque: @ 6V: 57 kg.cm (769 oz.in), @ 12V: 70 kg.cm (973 oz.in);
- for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy. Compatible with Arduino Motherboards.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 0.52 Pounds
See On Amazon #14
CQRobot USB to RS422 or RS485 Serial Port Converter Adapters Cable with FTDI FT232 Chip, for Windows 10 8 7 XP Mac. 600W Anti-Surge, 15KV-ESD, I/O Automatic Control, Support 32 Nodes, 1.2 Meters.
Asin: B08K99F447 | Model: CQRCK701 | PartNumber: CQRCK701
The Converter Has A Built-In Zero-Delay Automatic Transceiver, And The Unique I/O Circuit Automatically Controls The Data Flow Without Any Handshake Signal. (Such As Rts, Dtr, Etc.) And Jumper Sets To Achieve Full-Duplex, Half-Duplex Mode Conversion, Support 32 Node Devices..
Comply With Fcc, Ce, Rohs Standards, With Power, Tx And Rx Led Indicators To Check Connection And Communication Activity, Support Windows 10, 8, 8.1, 7, Vista, Xp, Linux And Mac, Etc..
There Are No Irq And Com Port Conflicts, Since The Port Do Not Require Any Additional Irq, Dma, Memory As Resources On The System; Rs422 For Half Duplex And Rs485 For Full Duplex Communication..
The Serial Port Converter Is Very Suitable For Industrial Environments. It Provides 600 Watt Surge Protection And 15Kv Esd Isolation Protection On All Signal Pins To Protect Expensive And Usually Sensitive Control Equipment From Electrical Damage..
Features
- The USB to RS422 or RS485 converter has a built-in high-performance FTDI chipset FT232 chip, allowing you to quickly connect RS422 or RS485 devices to the USB port of your laptop.
- The serial port converter is very suitable for industrial environments. It provides 600 watt surge protection and 15KV ESD isolation protection on all signal pins to protect expensive and usually sensitive control equipment from electrical damage.
- The converter has a built-in zero-delay automatic transceiver, and the unique I/O circuit automatically controls the data flow without any handshake signal. (Such as RTS, DTR, etc.) and jumper sets to achieve full-duplex, half-duplex mode conversion, support 32 node devices.
- There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system; RS422 for Half duplex and RS485 for Full duplex communication.
- Comply with FCC, CE, RoHs standards, With power, TX and RX LED indicators to check connection and communication activity, support Windows 10, 8, 8.1, 7, Vista, XP, Linux and Mac, etc.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 0.35 Pounds
See On Amazon #15
CQRobot 90:1 Metal DC Geared-Down Motor 37Dx54.8L mm 6V or 12V with Mounting Bracket Kit. 6V-5W-60RPM-18 kg.cm(243 oz.in), 12V-10W-120RPM-32 kg.cm(432 oz.in), D-Shaped Output Shaft Long 16mm.
Asin: B08ZK7C3NH | Model: CQR37D12V-I | PartNumber: CQR37D12V-I
No-Load Speed: @ 6V: 60 Rpm, @ 12V: 120 Rpm;.
For Projects Such As Robots, Measuring Devices, Medical Equipment, Smart Balance Car, Rc Car Model, Smart Home Appliance, Custom Servo, Diy Engine Toy..
Stall Torque: @ 6V: 18 Kg.Cm (243 Oz.In), @ 12V: 32 Kg.Cm (432 Oz.In);.
Max Power: @ 6V: 5 W, @ 12V: 10 W;.
Features
- 6V or 12V 90:1 Metal DC Geared-Down Motor 37Dx54.8L mm, with Metal Mounting Bracket Kit, D-shaped Output Shaft 6mm Diameter and Long 16mm;
- Max Power: @ 6V: 5 W, @ 12V: 10 W;
- No-load Speed: @ 6V: 60 RPM, @ 12V: 120 RPM;
- Stall Torque: @ 6V: 18 kg.cm (243 oz.in), @ 12V: 32 kg.cm (432 oz.in);
- for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #16
CQRobot 182.29:1 Metal DC Geared-Down Motor 20Dx60.4L mm 2W / 12V with 48 CPR Encoder and Fix Bracket. 76 RPM / 9.3 kg.cm (129 oz.in), D-Shaped Output Shaft 4 mm / 11 mm (Diameter/Length).
Asin: B094HTPJLS | Model: CQRGA20Y180GR182.29 | PartNumber: CQRGA20Y180GR182.29
No-Load Speed @ 12V: 76 Rpm;.
For Projects Such As Robots, Measuring Devices, Medical Equipment, Smart Balance Car, Rc Car Model, Smart Home Appliance, Custom Servo, Diy Engine Toy..
Stall Torque @ 12V: 9.3 Kg.Cm (129 Oz.In);.
Max Power: 2 W;.
Features
- 182.29:1 Metal Gearmotor 20Dx60.4L mm 12V with 48 CPR Encoder, with Mounting Bracket;
- Max Power: 2 W;
- No-load Speed @ 12V: 76 rpm;
- Stall Torque @ 12V: 9.3 kg.cm (129 oz.in);
- for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #17
CQRobot 34.01:1 LP Metal DC Geared-Down Motor 25Dx51.8L mm 3W/6V, with Metal Installation Mounting Bracket. 170 RPM/3.5 kg.cm (50 oz.in), D-Shaped Output Shaft 4 mm/12.5 mm (Diameter/Length).
Asin: B0922CS7P1 | Model: CQR25D6V-LP-G | PartNumber: CQR25D6V-LP-G
No-Load Speed @ 6V: 170 Rpm;.
For Projects Such As Robots, Measuring Devices, Medical Equipment, Smart Balance Car, Rc Car Model, Smart Home Appliance, Custom Servo, Diy Engine Toy..
Stall Torque @ 6V: 3.5 Kg.Cm (50 Oz.In);.
Max Power: 3 W;.
Features
- 34.01:1 Low-power metal DC geared-down motor 25Dx51.8L mm 6V, with metal installation mounting bracket, D-shaped Output Shaft 4 mm diameter and length 12.5 mm;
- Max Power: 3 W;
- No-load Speed @ 6V: 170 rpm;
- Stall Torque @ 6V: 3.5 kg.cm (50 oz.in);
- for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 0.26 Pounds
See On Amazon #18
CQRobot Ocean: 362.18:1 HP Metal DC Geared-Down Motor 25Dx72.5L mm 10W/12V with 48 CPR Encoder and Fix Bracket. 27 RPM/30 kg.cm (400 oz.in), D-Shaped Output Shaft 4 mm/12.5 mm (Diameter/Length).
Asin: B091KSKHKL | Model: CQR25D12V48EN-HP-R | PartNumber: CQR25D12V48EN-HP-R
No-Load Speed @ 12V: 27 Rpm;.
For Projects Such As Robots, Measuring Devices, Medical Equipment, Smart Balance Car, Rc Car Model, Smart Home Appliance, Custom Servo, Diy Engine Toy..
Stall Torque @ 12V: 30 Kg.Cm (400 Oz.In);.
Max Power: 10 W;.
Features
- 362.18:1 High-power metal DC geared-down motor 25Dx72.5L mm 12V, with 48 CPR Encoder, with metal installation mounting bracket, D-shaped Output Shaft 4 mm diameter and length 12.5 mm;
- Max Power: 10 W;
- No-load Speed @ 12V: 27 rpm;
- Stall Torque @ 12V: 30 kg.cm (400 oz.in);
- for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 0.26 Pounds
See On Amazon #19
CQRobot Ocean: Relay Module, 5V to 30V Input/Output, DC2.1 Interface, Compatible with Raspberry Pi/Micro:bit/Arduino/Other Control Boards. for Robot, Gardening, Smart Home, RC Car and Other Projects.
Asin: B08NVK7LQW | Model: CQRJDQ01 | PartNumber: CQRJDQ01
While The Relay Module Simplifies The Wiring Method, It Retains The Functions Of The Relay Nc And No, And Only Uses A Simple Adjustment Toggle Switch To Switch Between Normally Open And Normally Closed Modes..
Suitable For Robots, Lighting, Gardening, Smart Home, Safety Protection, Rc Car Model And Other Projects..
Adopt Standard Ocean Sensor Interface, Support 3.3V To 5.5V Wide Voltage Input, Compatible With Raspberry Pi, Micro:Bit, Arduino And Other Main Control Boards..
The Input Or Output Voltage Is 5V To 30V, Which Is Compatible With Most Power Supplies, Battery Boxes, Dc Power Supplies, And Power Banks..
Features
- The output and input terminals of the relay module are equipped with DC2.1 interface adapters, which simplifies the wiring of traditional relays.
- The input or output voltage is 5V to 30V, which is compatible with most power supplies, battery boxes, DC power supplies, and power banks.
- While the relay module simplifies the wiring method, it retains the functions of the relay NC and NO, and only uses a simple adjustment toggle switch to switch between normally open and normally closed modes.
- Adopt standard Ocean sensor interface, support 3.3V to 5.5V wide voltage input, Compatible with Raspberry Pi, Micro:bit, Arduino and other main control boards.
- Suitable for robots, lighting, gardening, smart home, safety protection, RC car model and other projects.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon #20
CQRobor 298:1 Micro Metal Gearmotor 12Dx24L mm Low-Power (LP) 6V (2 Pieces), 45 RPM/2.0 kg.cm (28 oz.in), with Mounting Bracket, D-Shaped Gearbox Output Shaft is 9 mm Long and 3 mm in Diameter.
Asin: B085CK83GP | Model: CQR6VN20LP298GR | PartNumber: CQR6VN20LP298GR
It Has A Cross Section Of 10 Mm * 12 Mm, And The D-Shaped Gearbox Output Shaft Is 9 Mm Long And 3 Mm In Diameter..
Stall Extrapolation: 2.0 Kg.Cm (28 Oz.In), 0.36 A..
No-Load Performance: 45 Rpm, 20 Ma..
Dimensions Of Versions With Precious Metal Brushes (Lp), This Gearmotor With Mounting Bracket..
Features
- This gearmotor is a miniature low-power, 6 V brushed DC motor with a 298:1 metal gearbox.
- Dimensions of versions with precious metal brushes (LP), This gearmotor with Mounting Bracket.
- It has a cross section of 10 mm * 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
- No-load Performance: 45 RPM, 20 mA.
- Stall Extrapolation: 2.0 kg.cm (28 oz.in), 0.36 A.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 0.02 Pounds
See On Amazon #21
RGB Stackable Stacking Pin Header and PCB Header Vertical 2.54mm - 4/5 / 6/8 / 10 Pin Kit. Application to Prototype Board, for Arduino Assembly and PCB Prototyping.
Asin: B079MCLLPH | Model: CQRPM0254GB | PartNumber: CQRPM0254GB
2.54Mm Female And Pin Header 4P/5P/6P/8P/10P..
The Color Contains White, Yellow, Blue, Red, Green, Orange Six Colors..
For Arduino Uno R3, Female Socket Blue - Analog Pin Indicator (6P), Female Red Plug - Arduino Power Pin Indicator And Digital Pin Indicator (8P)..
Features
- Suitable for Arduino, PCB Prototypingand Prototype board Assembly.
- For Arduino UNO R3, Female Socket Blue - Analog Pin Indicator (6P), Female Red Plug - Arduino Power Pin Indicator and Digital Pin Indicator (8P).
- 2.54mm female and pin header 4P/5P/6P/8P/10P.
- The color contains white, yellow, blue, red, green, orange six colors.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
See On Amazon