ChillWaves - Buying Guide
Last Updated: 04/29/2024
Share on
Bestselling from ChillWaves on Amazon
- ChillWaves Brass Air Hose Fittings, Hose Barb Fittings 1/2" Barb x 1/2" NPT Male Thread Adapter with...
- ChillWaves Brass Compression Tube Fitting, 1/4" OD x 1/4" OD Compression Union Connector(10-PACK)
- ChillWaves Brass Mini Ball Valve, Shut Off Switch Ball Valve 1/4" NPT Male x 1/4" NPT Female Thread ...
- ChillWaves Brass Ball Valve, Air Compressor Ball Valve Shut Off Switch 1/8" NPT Male x 1/8" NPT Fema...
- ChillWaves Brass Pipe Fitting, Outer Hex Head Socket Pipe Plug Fitting 1/4" NPT Male Thread Adapter(...
- ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Hex Bushing 1" NPT Male x 3/4" NPT Female Threa...
- ChillWaves Brass Pipe Fitting, Hex Coupling 3/8" NPT Female x 3/8" NPT Female Thread Adapter(3-PACK)
- ChillWaves Brass Pipe Fitting, Reducer Hex Bushing 3/4" NPT Male x 1/2" NPT Female Thread Adapter(6-PACK)
- ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Adapter 1/4" NPT Female x 1/8" NPT Male Thread ...
- ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Hex Nipple 1/2" NPT Male x 3/8" NPT Male Thread...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ChillWaves Brass Air Hose Fittings, Hose Barb Fittings 1/2" Barb x 1/2" NPT Male Thread Adapter with Hose Clamp(6-PACK)
Asin: B0B752NYY1 | Model: CWJX041 | PartNumber: CWJX041
Use - The Barbed End Is Used To Connect Flexible Hose Or Tubing, The Npt End Is Used To Connect To Threaded Pipe Fittings, And Can Be Used With Pvc, Pu, Rubber Hose Or Tubing. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" Barb x 1/2" NPT Male Hose Barb Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - The barbed end is used to connect flexible hose or tubing, the NPT end is used to connect to threaded pipe fittings, and can be used with PVC, PU, rubber hose or tubing. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #2
ChillWaves Brass Compression Tube Fitting, 1/4" OD x 1/4" OD Compression Union Connector(10-PACK)
Asin: B0B7545Z93 | Model: CWJX059 | PartNumber: CWJX059
Use - Suitable For Oil, Gas, Water And Other Non-Corrosive Or Corrosive Pipeline Systems, Temperature And Pressure Resistance, Good Sealing And Repeatability, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc..
Working Principle - Compression Tube Fitting Is To Compress The Ferrule By Thread Interlocking, And The Two Ends Of The Inner Diameter Of The Ferrule Tightly Wrap The Tube Due To Radial Shrinkage, Which Plays A Sealing Role And Realizes The Sealing And Tightening Effect Between The Joint And The Tube..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" Tube OD x 1/4" Tube OD, Compression Tube Fitting mainly consists of a fitting body with a 24 degree tapered hole, a ferrule with a sharp inner edge, and a nut for compression.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Suitable for oil, gas, water and other non-corrosive or corrosive pipeline systems, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- WORKING PRINCIPLE - Compression Tube Fitting is to compress the ferrule by thread interlocking, and the two ends of the inner diameter of the ferrule tightly wrap the tube due to radial shrinkage, which plays a sealing role and realizes the sealing and tightening effect between the joint and the tube.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #3
ChillWaves Brass Mini Ball Valve, Shut Off Switch Ball Valve 1/4" NPT Male x 1/4" NPT Female Thread Pipe Fitting(4-PACK)
Asin: B0BDFZYLVS | Model: CWJX082 | PartNumber: CWJX082
Use - Brass Ball Valve Is Mainly Used For Cutting, Distributing And Changing The Flow Direction Of Medium, With Good Flow Regulation Function. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper, Usually Cannot Be Screwed To The End, This Ball Valve Is Not Limited By The Mounting Orientation, The Flow Of The Medium Can Be Any Direction..
Features - For Manual On/Off Control.90-Degree Operable Handle, Opening And Closing Quickly And Lightly.Simple Structure, Relatively Small Size, Easy To Install In A Narrow Working Space, Light Weight And Easy Maintenance..
Material - Chrome Plated Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" NPT Male x 1/4" NPT Ball Valve. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Chrome Plated Brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Brass ball valve is mainly used for cutting, distributing and changing the flow direction of medium, with good flow regulation function. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- FEATURES - For manual on/off control.90-degree operable handle, opening and closing quickly and lightly.Simple structure, relatively small size, easy to install in a narrow working space, light weight and easy maintenance.
- NOTICE - NPT is a tapered pipe thread with a 60 taper, usually cannot be screwed to the end, this ball valve is not limited by the mounting orientation, the flow of the medium can be any direction.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #4
ChillWaves Brass Ball Valve, Air Compressor Ball Valve Shut Off Switch 1/8" NPT Male x 1/8" NPT Female Thread Pipe Fitting(4-PACK)
Asin: B0C4LM39KF
Use - Brass Ball Valve Is Mainly Used For Cutting, Distributing And Changing The Flow Direction Of Medium, With Good Flow Regulation Function. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper, Usually Cannot Be Screwed To The End, This Ball Valve Is Not Limited By The Mounting Orientation, The Flow Of The Medium Can Be Any Direction..
Features - The Lever Handle Is Covered With Red Plastic For Manual On/Off Control.180-Degree Operable Handle, Opening And Closing Quickly And Lightly.Simple Structure, Relatively Small Size, Easy To Install In A Narrow Working Space, Light Weight And Easy Maintenance..
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/8" NPT Male x 1/8" NPT Ball Valve. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Brass ball valve is mainly used for cutting, distributing and changing the flow direction of medium, with good flow regulation function. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- FEATURES - The lever handle is covered with red plastic for manual on/off control.180-degree operable handle, opening and closing quickly and lightly.Simple structure, relatively small size, easy to install in a narrow working space, light weight and easy maintenance.
- NOTICE - NPT is a tapered pipe thread with a 60 taper, usually cannot be screwed to the end, this ball valve is not limited by the mounting orientation, the flow of the medium can be any direction.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #5
ChillWaves Brass Pipe Fitting, Outer Hex Head Socket Pipe Plug Fitting 1/4" NPT Male Thread Adapter(12-PACK)
Asin: B0C4LP4B3D | Model: CWJX103 | PartNumber: CWJX103
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" NPT Male Outer Hex Head Socket Pipe Plug. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #6
ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Hex Bushing 1" NPT Male x 3/4" NPT Female Thread Adapter(3-PACK)
Asin: B0CDTB1R4Z | Model: CWJX156D | PartNumber: CWJX156D
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1" NPT Male x 3/4" NPT Female Hex Bushing. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- USE - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #7
ChillWaves Brass Pipe Fitting, Hex Coupling 3/8" NPT Female x 3/8" NPT Female Thread Adapter(3-PACK)
Asin: B0B74ZK1JJ | Model: CWJX037D | PartNumber: CWJX037D
Use - It Is Used To Connect Male Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 3/8" NPT Female x 3/8" NPT Female Hex Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - It is used to connect male threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #8
ChillWaves Brass Pipe Fitting, Reducer Hex Bushing 3/4" NPT Male x 1/2" NPT Female Thread Adapter(6-PACK)
Asin: B0B755DT26 | Model: CWJX009 | PartNumber: CWJX009
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 3/4" NPT Male x 1/2" NPT Female Hex Bushing. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #9
ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Adapter 1/4" NPT Female x 1/8" NPT Male Thread Adapter(3-PACK)
Asin: B0CQ2SCMTM | Model: CWJX205D | PartNumber: CWJX205D
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/4" NPT Female x 1/8" NPT Male Reducer Adapter. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- USE - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #10
ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Hex Nipple 1/2" NPT Male x 3/8" NPT Male Thread Adapter(6-PACK)
Asin: B0CG6F99YX | Model: CWJX170 | PartNumber: CWJX170
Use - It Is Used To Connect Female Threaded Pipe Fittings Of The Different Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" NPT Male x 3/8" NPT Male Reducer Hex Nipple. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - It is used to connect female threaded pipe fittings of the different diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #11
ChillWaves 304 Stainless Steel Pipe Fitting, Tee 1/2" x 1/2" x 1/2" NPT Female Thread Adapter(2-PACK)
Asin: B0CDT9LD7K | Model: CWJX160D | PartNumber: CWJX160D
Use - It Is Used To Connect Male Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 225Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" x 1/2" x 1/2" NPT Female Tee Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- USE - It is used to connect male threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 225PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #12
ChillWaves Brass Pipe Fitting, Tee 3/8" x 3/8" x 3/8" NPT Female Thread Adapter(3-PACK)
Asin: B0C4LK3H87 | Model: CWJX052D | PartNumber: CWJX052D
Use - It Is Used To Connect Male Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 3/8" x 3/8" x 3/8" NPT Female Tee Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - It is used to connect male threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #13
ChillWaves 1/4" NPT Brass Pipe Fitting Kit, 2 Ball Valve 2 Hex Bushing 2 Hex Nipple 2 Tee Air Hose Fiting Kit Thread Adapter(8-PACK)
Asin: B0BW9KHXW3 | Model: CWJX101 | PartNumber: CWJX101
Use - The Kit Is Mainly Used For Cutting, Distributing And Changing The Flow Direction Of The Medium, For Connecting A Pressure Gauge, For Measuring The Pressure Of The Fluid Passing Through The Two Main Pipes, And Has A Good Flow Regulation Function. It Is A Pipe Coupling Specially Designed For Pipe Connection Works. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Features - The Lever Handle Is Covered With Red Plastic For Manual On/Off Control.180-Degree Operable Handle, Opening And Closing Quickly And Lightly.Simple Structure, Relatively Small Size, Easy To Install In A Narrow Working Space, Light Weight And Easy Maintenance..
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" NPT Ball Valve&Tee&Nipple,1/4" NPT x 1/8" NPT Hex Bushing. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - The kit is mainly used for cutting, distributing and changing the flow direction of the medium, for connecting a pressure gauge, for measuring the pressure of the fluid passing through the two main pipes, and has a good flow regulation function. It is a pipe coupling specially designed for pipe connection works. It is suitable for most gases, water, oil and corrosive liquids.
- FEATURES - The lever handle is covered with red plastic for manual on/off control.180-degree operable handle, opening and closing quickly and lightly.Simple structure, relatively small size, easy to install in a narrow working space, light weight and easy maintenance.
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #14
ChillWaves 304 Stainless Steel Cast Pipe Fitting, Coupling 3/4" NPT Female x 3/4" NPT Female Thread Adapter(12-PACK)
Asin: B0CG6G66VD | Model: CWJX177 | PartNumber: CWJX177
Use - It Is Used To Connect Male Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 225Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 3/4" NPT Female x 3/4" NPT Female Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - It is used to connect male threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 225PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #15
ChillWaves Brass Air Hose Fittings, 90 Degree Elbow Hose Barb Fittings 3/8" Barb x 3/8" NPT Male Thread Adapter with Hose Clamps(3-PACK)
Asin: B0CQ2R12V4 | Model: CWJX228D | PartNumber: CWJX228D
Use - The Barbed End Is Used To Connect Flexible Hose Or Tubing, The Npt End Is Used To Connect To Threaded Pipe Fittings, 90° Angle To Change Direction Of Flow Between Pipes, And Can Be Used With Pvc, Pu, Rubber Hose Or Tubing. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 3/8" Barb x 3/8" NPT Male 90 Degree Elbow Hose Barb Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - The barbed end is used to connect flexible hose or tubing, the NPT end is used to connect to threaded pipe fittings, 90 angle to change direction of flow between pipes, and can be used with PVC, PU, rubber hose or tubing. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #16
ChillWaves Brass Pipe Fitting, Reducer Adapter 1/4" NPT Female x 1/8" NPT Male Thread Adapter(6-PACK)
Asin: B0B753ZH3S | Model: CWJX029 | PartNumber: CWJX029
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. Change The Pipe Diameter And Thread Type. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" NPT Female x 1/8" NPT Male Reducer Adapter. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to connect female and male threaded pipes or fittings of different diameters. Change the pipe diameter and thread type. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #17
ChillWaves 1/8" NPT Brass Pipe Fitting Kit, 6 1/8" NPT Male Hex Nipple 6 1/8" NPT Female Hex Coupling Thread Adapter 12-PACK
Asin: B0BW9L67GD
Use - It Is Used To Connect Male And Female Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/8" NPT Male Hex Nipple&1/8" NPT Female Hex Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - It is used to connect male and female threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #18
ChillWaves PVC Union Full Port Ball Valve 2"(DN50) True Union Ball Valve ASTM EPDM O-ring PTFE Seats Suitable for Water Supply System 2" Slip Socket(1-PACK)
Asin: B0CDT9SXNV
Use - Full Flow Ball Valves For Water Supply Systems, Suitable For Commercial Plumbing, Swimming Pools, Agricultural Irrigation, Waterworks And Oem Applications, And Sealed With Astm Epdm O-Rings..
Features - For Manual On/Off Control.90-Degree Operable Handle, Opening And Closing Quickly And Lightly.Simple Structure, Light Weight And Easy Maintenance..
Working Pressure & Temperature - 150Psi Maximum Working Pressure, Temperature Range 59°F To 131°F (15°C To +55°C).
Material - Made Of Pvc Material, Overall Thickening Treatment, Acid And Alkali Resistance, High Pressure Resistance, Durable..
Features
- SIZE - 2" (DN50) PVC Union Ball Valve, which can be used as a union and valve, can be easily disassembled and serviced for cleaning without breaking the pipe connections.
- MATERIAL - Made of PVC material, overall thickening treatment, acid and alkali resistance, high pressure resistance, durable.
- USE - Full flow ball valves for water supply systems, suitable for commercial plumbing, swimming pools, agricultural irrigation, waterworks and OEM applications, and sealed with ASTM EPDM o-rings.
- WORKING PRESSURE & TEMPERATURE - 150PSI maximum working pressure, temperature range 59 F to 131 F (15 C to +55 C)
- FEATURES - For manual on/off control.90-degree operable handle, opening and closing quickly and lightly.Simple structure, light weight and easy maintenance.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #19
ChillWaves Brass Pneumatics Reusable Replacement Fitting Reusable Hose Splicer 1/4" ID Polyurethane Hose x 1/4" ID Polyurethane Hose 1/4" Barb Repair Fitting(5-PACK)
Asin: B0BNNMXF6S
Use - For Hose Extension And Repair, Temperature And Pressure Resistance, Good Sealing And Repeatability, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc.It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - For Pu, Pvc, Pe And Other Plastic Hoses, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" ID x 1/4" ID Reusable Hose Splicer Repair Fitting. Note, If you want it to work on rubber hoses, please check the size before buying and you may need to thin the outer layer of the hose.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - for hose extension and repair, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - For PU, PVC, PE and other plastic hoses, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #20
ChillWaves 1/2" NPT x 3/8" NPT Brass Pipe Fitting Kit, 5 Hex Bushing 5 Hex Reducer Nipple 5 Hex Reducer Adapter Thread Adapter 15-PACK
Asin: B0BW9KRZB1
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. Change The Pipe Diameter And Thread Type. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT x 3/8" NPT Hex Bushing & Hex Reducer Nipple & Hex Reducer Adapter. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to connect female and male threaded pipes or fittings of different diameters. Change the pipe diameter and thread type. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #21
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1" NPT Male Thread Adapter(6-PACK)
Asin: B0CX1YXC7V | Model: CWJX241 | PartNumber: CWJX241
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #22
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 3/4" NPT Male Thread Adapter(3-PACK)
Asin: B0CX1YM69B | Model: CWJX240D | PartNumber: CWJX240D
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 3/4" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #23
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 3/8" NPT Male Thread Adapter(6-PACK)
Asin: B0CX1Z5NFX | Model: CWJX238D | PartNumber: CWJX238D
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 3/8" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #24
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1/4" NPT Male Thread Adapter(6-PACK)
Asin: B0CX1YD6Q4 | Model: CWJX237D | PartNumber: CWJX237D
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/4" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #25
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1-1/2" NPT Male Thread Adapter(2-PACK)
Asin: B0CX1Y8PHP | Model: CWJX243 | PartNumber: CWJX243
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1-1/2" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #26
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1-1/4" NPT Male Thread Adapter(1-PACK)
Asin: B0CX1Y882F | Model: CWJX242D | PartNumber: CWJX242D
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1-1/4" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #27
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1/4" NPT Male Thread Adapter(12-PACK)
Asin: B0CX1Y24BD | Model: CWJX237 | PartNumber: CWJX237
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/4" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #28
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 3/4" NPT Male Thread Adapter(6-PACK)
Asin: B0CX1Y1TPZ | Model: CWJX240 | PartNumber: CWJX240
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 3/4" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #29
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1/2" NPT Male Thread Adapter(6-PACK)
Asin: B0CX1XFJY5 | Model: CWJX239D | PartNumber: CWJX239D
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #30
ChillWaves 304 stainless steel Pipe Fitting, Internal Hex Head Socket Pipe Plug Fitting 1/2" NPT Male Thread Adapter(12-PACK)
Asin: B0CX1X7W8P | Model: CWJX239 | PartNumber: CWJX239
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" NPT Male Internal Hex Head Socket Pipe Plug Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon