Craznick - Buying Guide
Last Updated: 05/05/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Craznick Mini 2 SE/Mini SE/Mini 2 Propellers: with Propeller Guard Landing Gear Leg Extensions Propellers Holder Guard Gimbal Cover Total 24 pcs for DJI Mini 2 SE/Mini SE/Mini 2 Drone Accessories Set
Asin: B09ZQ96Z6C | Model: 001 | PartNumber: 001 | Ean: 0768477276051 | UPC: 768477276051
4 Pcs Propeller Guard & 2 Pcs Holder Guard: The Anti Collision Protective Cover Can Surround The Propellers To Prevent Horizontal Collisions During Flight, So As To Avoid Hurting People Or Animals, Or Hitting Buildings Or Trees, Causing A Crash. Whether It Is Used Indoors Or Outdoors, It Can Greatly Improve The Safety Of Mavic Mini. 2 Pcs Propeller Holder Guard Attach The Propeller Fixator To The Propeller To Prevent Damage To The Propeller During Storage.
Gimbal Cover: Made Of Superior Hard Pc Material, Lightweight And Durable To Use. Provides Multiple Protections For The Camera To Prevent Foreign Objects From Colliding, Dust Or Water. Can Help To Fix The Gimbal, Prevent Gimbal And Camera From Waggling During Transportation.
Sled Type Landing Gear: Effectively Increase The Height By 2.2Cm. Avoid Ground Debris Or Water Stains From Soiling Or Damaging The Drone Body, Gimbal And Propellers. Hollow-Carved Design, Won't Block The Power Indicator, Bottom Sensor, Cooling Vents. Tailored Made, Easy To Install And Remove, Will Not Shake Or Fall Off During Flight.
Low Noise Blades: Design For Dji Mini 2 Se/Mini 2/Mini Se (Not For Mavic Mini). Light Weight And Good Quality. Props Are Tested Before Sell, And It Performs Almost As Well As Oem Blades. 16 Pcs Propellers , 24 Pcs Screws, 2 Pcs Screwdriver.
Features
- Perfect Combination: This drone accessories set contains 16 PCS Low-Noise Propellers (with 24 dedicated screws and 2 screwdrivers) + 4 PCS Anti-Collision Ring + 2 PCS Propellers Holder Guard + 1 PCS Extended Landing Gear Leg + 1 PCS Gimbal Cover compatible with DJI mavic mini SE and mini 2 drone. (Excluding Drones)
- Low Noise Blades: Design for DJI Mini 2 SE/Mini 2/Mini SE (Not for Mavic mini). Light weight and good quality. Props are tested before sell, and it performs almost as well as oem blades. 16 PCS propellers , 24 PCS screws, 2 PCS screwdriver
- 4 PCS Propeller Guard & 2 PCS Holder Guard: The anti collision protective cover can surround the propellers to prevent horizontal collisions during flight, so as to avoid hurting people or animals, or hitting buildings or trees, causing a crash. Whether it is used indoors or outdoors, it can greatly improve the safety of Mavic Mini. 2 PCS Propeller Holder Guard Attach the propeller fixator to the propeller to prevent damage to the propeller during storage
- Sled Type Landing Gear: Effectively increase the height by 2.2cm. avoid ground debris or water stains from soiling or damaging the drone body, gimbal and propellers. Hollow-carved design, won't block the power indicator, bottom sensor, cooling vents. Tailored made, easy to install and remove, will not shake or fall off during flight
- Gimbal Cover: Made of superior hard PC material, Lightweight and durable to use. Provides multiple protections for the camera to prevent foreign objects from colliding, dust or water. Can help to fix the gimbal, prevent gimbal and camera from waggling during transportation
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Weight: 0.31 pounds
See On Amazon #2
Propellers for DJI Air 3 Replacement Prop Blades Low Noise Accessories for DJI Mavic Air 3 Drone Accessories 8pcs Orange Tips
Asin: B0CDPVXGX8 | Model: CR23080401 | PartNumber: CR23080401 | Ean: 0768443637541 | UPC: 768443637541
Features: Easy To Install And Remove, Easy To Carry. New Aerodynamic Design, Excellent Noise Reduction Performance, Reduce Wind Resistance, And Make Your Drone Have A Longer Endurance Time..
Package List: 8 * Dji Air 3 Propellers (Orange) . The Drone Is Just To Better Display The Product, It Is Not Included In The Package..
Easy Intall: Just A Few Seconds To Install And Remove The Blade, Continues The Classic Quick Disassembly Design, Just Insert The Blade Into The Corresponding Seat And Press It To The Bottom, Rotate The Blade Along The Locking Direction, And The Blade Will Spring Up And Lock After Releasing..
Applicable Models: This Propellers Are Suitable For Dji Air 3.
Features
- Upgraded Version: This propellers set has lighter weight and low noise design, it will make your drone flying more stable and quieter.
- Applicable Models: This propellers are suitable for DJI Air 3
- Features: Easy to install and remove, easy to carry. New aerodynamic design, excellent noise reduction performance, reduce wind resistance, and make your drone have a longer endurance time.
- Easy Intall: Just a few seconds to install and remove the blade, continues the classic quick disassembly design, just insert the blade into the corresponding seat and press it to the bottom, rotate the blade along the locking direction, and the blade will spring up and lock after releasing.
- Package List: 8 * DJI Air 3 Propellers (Orange) . The drone is just to better display the product, it is not included in the package.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.79 x 4.33 x 2.36 Inches
See On Amazon #3
Propellers for DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Classic Replacement Prop Blades Low Noise Accessories for DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Classic 8 Pack
Asin: B0C16BCQLS | Model: 2023033102 | PartNumber: 2023033102 | Ean: 0768443637008 | UPC: 768443637008
Quick Removal Design: Our Propeller Blades Continue The Classic Quick-Release Design, Which Makes It Easy To Install And Remove In Just A Few Seconds. Insert The Blade Into The Corresponding Slot, Press Down Until It Is Fully Seated, Rotate The Blade In The Locking Direction, And Release It To Spring Up For Secure Installation..
Packing List: 8Pcs Propellers (Orange Tips). Please Note That The Propeller Tips Are Not Made Of Gel Material But Are Coated With Orange To Better Distinguish The Color Of The Propellers. The Drone Is Just For Better Display Of The Product, It Is Not Included In The Package..
Features: This Propeller Features A New Aerodynamic Design That Not Only Reduces Noise, But Also Reduces Wind Resistance, Improves Overall Performance, And Extends The Drone's Endurance..
Low Noise: Compared With The Original Gel Tip Blades, Our Mavic 3 Pro Propeller Is Lighter In Weight And Lower In Noise, Providing You With A Quieter Flying Experience..
Features
- Applicable model: This propeller blade is suitable for DJI Mavic 3 Pro, Mavic 3 Pro Cine, Mavic 3, Mavic 3 Cine, Mavic 3 Classic drone.
- Low noise: Compared with the original gel tip blades, our Mavic 3 Pro propeller is lighter in weight and lower in noise, providing you with a quieter flying experience.
- Quick removal design: Our propeller blades continue the classic quick-release design, which makes it easy to install and remove in just a few seconds. Insert the blade into the corresponding slot, press down until it is fully seated, rotate the blade in the locking direction, and release it to spring up for secure installation.
- Features: This propeller features a new aerodynamic design that not only reduces noise, but also reduces wind resistance, improves overall performance, and extends the drone's endurance.
- Packing list: 8pcs propellers (orange tips). Please note that the propeller tips are not made of gel material but are coated with orange to better distinguish the color of the propellers. The drone is just for better display of the product, it is not included in the package.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.94 x 4.80 x 4.96 inches
Warranty: NO
See On Amazon #4
Craznick Mini 3 / Mini 3 Pro Landing Gear: Foldable Quick Release Extension Leg for DJI Mini 3 / Mini 3 Pro Drone Accessories
Asin: B0BRKKF6B6 | Model: CRZYF3 | PartNumber: CRZYF3 | Ean: 0768443636254 | UPC: 768443636254
【Protable】Easy To Install And Remove Without Any Installation Tools. Will Not Shake Or Fall Off During Flight. Foldable Design For Easy Storage..
【Sturdy And Durable】 Suitable For Taking Off On Grass, Sand, Mud, Etc. After The Landing Gear Is Installed, The Arms Of The Drone Can Still Be Opened Or Folded Normally. Please Note That The Drone Is Only For Better Display Of The Landing Gear, The Package Does Not Contain..
【Hollow-Carved Design】Won't Block The Power Indicator, Bottom Sensor, Cooling Vents. It Has No Effect On Your Drone Performance..
【Lightweight】This Mini 3 / Mini 3 Pro Landing Gear Weighs Only 19.5G(0.69Oz), Which Does Not Affect The Flight Endurance Of Dji Mini 3 Series Drone..
Features
- Compatibility The Lightweight landing gear is designed for Dji Mini 3 / Mini 3 Pro Drone. Effectively increase the height of 2.6cm(1.02 in), avoid ground debris or water stains from soiling or damaging the drone body, gimbal and propellers.
- Lightweight This Mini 3 / Mini 3 Pro Landing gear weighs only 19.5g(0.69oz), which does not affect the flight endurance of Dji Mini 3 series drone.
- Protable Easy to install and remove without any installation tools. Will not shake or fall off during flight. Foldable design for easy storage.
- Hollow-carved Design Won't block the power indicator, bottom sensor, cooling vents. It has no effect on your drone performance.
- Sturdy and Durable Suitable for taking off on grass, sand, mud, etc. After the landing gear is installed, the arms of the drone can still be opened or folded normally. Please note that the drone is only for better display of the landing gear, the package does not contain.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 2.36 x 5.51 x 3.35 inches
See On Amazon #5
Propeller Guard for DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic Quick Release Prop Blade Guard DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic
Asin: B0C6DVLKYY | Model: CR230526 | PartNumber: CR230526 | Ean: 0768443637213 | UPC: 768443637213
【Easy Installation】The Propeller Guard Adopts A Buckle Design, Which Is Convenient And Easy To Install, And Will Not Scratch The Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic Drone Body. (Note: According To The Forward Direction Of The Drone, The Bottom Of Each Propeller Guard Is Marked With The Number A/A-1/B/B-1, Please Install It In The Corresponding Position).
【Package List】1 Set Dji Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic Propeller Guard.（Excluding Drones）.
【Lightweight Design】The Whole Set Weighs Only 107 Grams(0.24 Pounds), Which Is Much Lighter Than Similar Products On The Market, And Does Not Affect The Normal Flight Of The Dji Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic Drone.
【Unique Design】The Shape Of The Propeller Guard Adopts A Fortress Design, Which Can Improve Toughness. Detach The Propeller From The Outside To Prevent Scratching And Damage To The Blades. Effectively Prevent And Avoid Serious Consequences Such As Collisions, Injuries Or Damage To Blades Caused By High-Speed Rotating Blades.
Features
- Designed for DJI Mavic 3 Series Drone This is a propeller guard specially designed for DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic drone replacement parts accessory
- Unique Design The shape of the propeller guard adopts a fortress design, which can improve toughness. Detach the propeller from the outside to prevent scratching and damage to the blades. Effectively prevent and avoid serious consequences such as collisions, injuries or damage to blades caused by high-speed rotating blades
- Easy Installation The propeller guard adopts a buckle design, which is convenient and easy to install, and will not scratch the Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic drone body. (NOTE: According to the forward direction of the drone, the bottom of each propeller guard is marked with the number A/A-1/B/B-1, please install it in the corresponding position)
- Lightweight Design The whole set weighs only 107 grams(0.24 pounds), which is much lighter than similar products on the market, and does not affect the normal flight of the DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic drone
- Package List 1 Set DJI Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Cine/Mavic 3 Classic Propeller Guard. Excluding Drones
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.18 x 11.02 x 7.87 inches | Weight: 0.24 pounds
See On Amazon #6
Craznick Propeller Holder & Gimbal Cover for DJI Mavic 3 Pro/Mavic 3 Pro Cine Propeller Guard Fixer Propeller Holder Strap for DJI Mavic 3 Pro/Mavic 3 Pro Cine Drone Accessories
Asin: B0C9TR3VY3 | Model: CR230630 | PartNumber: CR230630 | Ean: 0768443637336 | UPC: 768443637336
The Gimbal Cover And Bottom Are Made Of Abs Material, Effectively Protecting The Drone Lens And The Propeller At The Bottom. The Propeller Strap Is Made Of Soft Silicone Material, Which Is Soft And Not Easily Deformed. It Effectively Protects The Top Propeller From Damage When Stored.
Compatibility With Mavic 3 Pro / Mavic 3 Pro Cine. Material: Abs+Silicone, Net Weight:2.5Oz.(71.7G), Product Size:7.67*4.13*3.7In(19.5*10.5*9.4Cm). Please Note That The Drones Are Just For Display, Not Include.
The Propeller Is Equipped With Two Holes For Adjustable Tightness, Which Will Not Compress The Propeller During Installation. Convenient Storage, It Can Be Placed In The Storage Bag Without Disassembly And Does Not Take Up Space.
Real Machine Mold Opening, Integrated With The Body Design, Effectively Protecting The Lens From Damage, Fixing The Front And Rear Propellers, And Protecting The Propellers In A Folded And Stored State.
Features
- The integrated design of the propeller holder and the lens cover protects the lens of the gimbal and the vision sensor. The two sides of the lens cover can protect the axis arm of the gimbal and also cover the bottom motor to prevent foreign objects from enterin
- Real machine mold opening, integrated with the body design, effectively protecting the lens from damage, fixing the front and rear propellers, and protecting the propellers in a folded and stored state
- The gimbal cover and bottom are made of ABS material, effectively protecting the drone lens and the propeller at the bottom. The propeller strap is made of soft silicone material, which is soft and not easily deformed. It effectively protects the top propeller from damage when stored
- The propeller is equipped with two holes for adjustable tightness, which will not compress the propeller during installation. Convenient storage, it can be placed in the storage bag without disassembly and does not take up space
- Compatibility with Mavic 3 Pro / Mavic 3 Pro Cine. Material: ABS+Silicone, Net weight:2.5oz.(71.7g), Product size:7.67*4.13*3.7in(19.5*10.5*9.4cm). Please note that the drones are just for display, not include
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 3.54 x 5.51 x 4.25 inches
See On Amazon #7
32Pcs Propellers for DJI Mini 3 Pro/Mini 4 Pro Replacement Prop Blades Low noise for DJI Mini 3 Pro/Mini 4 Pro Drone Accessories Exclusive Screws & Screwdrivers Orange Tips
Asin: B0B3MQCGQ1 | Model: 001-Orange | PartNumber: 001-Orange | Ean: 0768477342183 | UPC: 768477342183
Features: This Mini 4 Pro Prop Easy To Install And Disassemble, Easy To Carry. The New Aerodynamic Design Not Only Reduces Noise, But Also Reduces Wind Resistance To Improve Overall Performance, Thereby Extending The Flight Time Of Unmanned Aerial Vehicles..
Package List: 32 Propellers (Orange Tips) +4 Screwdrivers+48 Screws (Preventing Missing Screws). Please Note That The Mini 3 Pro/Mini 4 Pro Blades Tip Is Not Made Of Gel Material, But Is Coated With Orange To Better Distinguish The Blade Color. The Drone Is Only For Better Product Display And Is Not Included In The Packaging..
Easy To Install: This Mini 4 Pro Propellers Set Comes With A Mini Screwdriver And Screws, Allowing You To Easily Remove And Install The Propeller..
Low Noise: Compared With The Original Gel Tip Blade, Our Mini 3 Pro Replacement Blades Provide A Slightly Quieter Flight Experience. These Lightweight Propellers Not Only Reduce Noise, But Also Make Your Drone Flight More Stable And Quieter..
Features
- Applicable model: This propeller is for the DJI Mini 3 Pro/Mini 4 Pro drone.
- Low noise: Compared with the original gel tip blade, our Mini 3 Pro replacement blades provide a slightly quieter flight experience. These lightweight propellers not only reduce noise, but also make your drone flight more stable and quieter.
- Features: This Mini 4 Pro prop easy to install and disassemble, easy to carry. The new aerodynamic design not only reduces noise, but also reduces wind resistance to improve overall performance, thereby extending the flight time of unmanned aerial vehicles.
- Easy to install: This Mini 4 Pro propellers set comes with a mini screwdriver and screws, allowing you to easily remove and install the propeller.
- Package list: 32 Propellers (Orange tips) +4 Screwdrivers+48 Screws (Preventing missing screws). Please note that the mini 3 pro/Mini 4 pro blades tip is not made of gel material, but is coated with orange to better distinguish the blade color. The drone is only for better product display and is not included in the packaging.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.67 x 6.30 x 3.16 inches | Weight: 0.11 pounds
See On Amazon #8
RC Car Work Stand & Screws Pallet 360 Degree Rotation Aluminum Station Lift for 1/8 1/10 1/12 1/16 1/18 Scale Traxxas TRX4 Axial Arrma Redcat Losi RC Crawler Monster Truck Buggy Blue
Asin: B0BX5HKW3L | Model: CR022306 | PartNumber: CR022306 | Ean: 0768443636766 | UPC: 768443636766
【Excellent Quality】It Is Made Of High-Grade Steel With Excellent Workmanship. Durable. The Stand Has A Cm/In Scale, Which Is Convenient For Measuring The Length Of Parts Or Screws. Four Anti-Slip Pads At The Bottom Make It More Stable During Use. The Two Sponge Cushions Above Ensure That Your Rc Car Will Not Be Scratched During Use..
【What You Get】1X Rc Repair Stand (With Necessary Screws And Screwdrivers For Installation), 1 X Screws Pallet, 1 X Cross Sleeve. It Will Meet All Your Needs For Repairing Remote Control Cars, Can Be Given As A Gift To Friends Who Like Remote Control Models..
【Screw Pallet】The Screws Or Other Small Parts Can Be Stored When Disassembling The Model To Avoid The Loss. Ensure That A Complete Vehicle Can Be Assembled..
【360-Degree Rotation】Adjustable Height From 112Mm(4.41In) To 168Mm(6.61In) , A Repair Stand With An Adjustable Height Function Allows You To Find A Comfortable Position To Repair Your Car Model. Ideal For Models From 1/8Th To 1/18Th Rc Cars Truck, Buggy, Crawler, Drift.
Features
- Compatible RC Repair Stand Suit for 1/8 1/10 1/12 1/16 1/18 Scale Traxxas TRX4 Axial Arrma Redcat Losi RC Crawler Monster Truck Buggy
- 360-Degree Rotation Adjustable Height from 112mm(4.41in) to 168mm(6.61in) , A repair stand with an adjustable height function allows you to find a comfortable position to repair your car model. Ideal for Models from 1/8th to 1/18th RC Cars Truck, Buggy, Crawler, Drift
- Excellent Quality It is made of high-grade steel with excellent workmanship. Durable. The stand has a cm/in scale, which is convenient for measuring the length of parts or screws. Four anti-slip pads at the bottom make it more stable during use. The two sponge cushions above ensure that your RC car will not be scratched during use.
- Screw Pallet The screws or other small parts can be stored when disassembling the model to avoid the loss. Ensure that a complete vehicle can be assembled.
- What You Get 1x RC repair stand (with necessary screws and screwdrivers for installation), 1 x screws pallet, 1 x cross sleeve. It will meet all your needs for repairing remote control cars, can be given as a gift to friends who like remote control models.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.18 x 8.66 x 5.91 inches
See On Amazon #9
2 Pairs DJI RC/RC 2 Control Sticks CNC Aluminum Joysticks Replacement Thumb Stickers for DJI Mini 4 Pro/Mini 3 Pro/Mavic 3 Pro/Mavic 3 Pro Cine/Mavic 3/Mavic 3 Classic/Air 3 (Blue+Red)
Asin: B0CFFLPH95 | Model: CR23081102 | PartNumber: CR23081102 | Ean: 0768443637633 | UPC: 768443637633
【Anti-Skid Design】Anti-Skid Knurling Ergonomic Design. The Control Sticks Are Detachable, Can Be Easily Stored In The Remote Controller Like The Original Joystick. No Need For Separate Storage..
【Package Includes】2* Blue Sticks+2*Red Sticks (Shipping Package Includes Only The Joystick, The Controller Is Not Included)..
【Ultra Light】 The Weight Is Only About 2G And Will Not Cause Any Burden On You..
【Aerial Aluminum Alloy】Precisely Cnc Manufacturing, Anodizing Process. High Hardness And Durable, Better Using Experience.
Features
- Compatibility The DJI RC Control Sticks are compatible with DJI Mini 4 Pro / Mini 3 Pro / Mavic 3 / Mavic 3 Classic / Mavic 3 Pro / Mavic 3 Pro Cine / Air 2S / Air 3 remote controller with screen DJI RC/ DJI RC 2. (Please Note: Not suit for DJI RC-N1 RC-N2 and DJI RC PRO).
- Aerial Aluminum Alloy Precisely CNC manufacturing, anodizing process. High hardness and durable, better using experience
- Anti-skid Design Anti-skid knurling ergonomic design. The control Sticks are detachable, can be easily stored in the remote controller like the original joystick. No need for separate storage.
- Ultra Light The weight is only about 2g and will not cause any burden on you.
- Package includes 2* Blue Sticks+2*Red Sticks (Shipping package includes only the joystick, the controller is not included).
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.39 x 3.94 x 2.36 inches
See On Amazon #10
Propellers for DJI Mavic Air 2/Air 2s Replacement Prop Blades Low Noise Accessories for DJI Mavic Air 2/Air 2s Drone Accessories 8pcs Silver Tips
Asin: B0BBFTFHJD | Model: CR220822 | PartNumber: CR220822 | Ean: 0768461793168 | UPC: 768461793168
Features: Easy To Install And Remove, Easy To Carry. New Aerodynamic Design, Excellent Noise Reduction Performance, Reduce Wind Resistance, And Make Your Drone Have A Longer Endurance Time..
Package List: 8 * Dji Mavic Air 2/Air 2S Propellers (Silver). The Drone Is Just To Better Display The Product, It Is Not Included In The Package..
Easy Intall: Just A Few Seconds To Install And Remove The Blade, Continues The Classic Quick Disassembly Design, Just Insert The Blade Into The Corresponding Seat And Press It To The Bottom, Rotate The Blade Along The Locking Direction, And The Blade Will Spring Up And Lock After Releasing..
Applicable Models: This Propellers Are Suitable For Dji Mavic Air 2/Air 2S.
Features
- Upgraded Version: This propellers set has lighter weight and low noise design, it will make your drone flying more stable and quieter.
- Applicable Models: This propellers are suitable for DJI Mavic Air 2/Air 2s
- Features: Easy to install and remove, easy to carry. New aerodynamic design, excellent noise reduction performance, reduce wind resistance, and make your drone have a longer endurance time.
- Easy Intall: Just a few seconds to install and remove the blade, continues the classic quick disassembly design, just insert the blade into the corresponding seat and press it to the bottom, rotate the blade along the locking direction, and the blade will spring up and lock after releasing.
- Package List: 8 * DJI Mavic Air 2/Air 2s Propellers (Silver). The drone is just to better display the product, it is not included in the package.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.79 x 4.33 x 3.94 inches | Weight: 0.01 pounds
See On Amazon #11
Craznick Propellers for DJI Avata Replacement Prop Blades Low Noise Accessories for DJI Avata Drone Accessories Exclusive Screws & Screwdrivers 8 Pcs
Asin: B0BGHXSFY1 | Model: YF05AG | PartNumber: YF05AG | Ean: 0768461793700 | UPC: 768461793700
Features: Easy To Install And Remove, Easy To Carry. New Aerodynamic Design, Excellent Noise Reduction Performance, Reduce Wind Resistance, And Make Your Drone Have A Longer Endurance Time..
Package List: 8 Propellers +2 Screwdrivers+20 Screws(Preventing Missing Screws). The Drone Is Just To Better Display The Product, It Is Not Included In The Package..
Intall Tools: The Package Come With Mini Screwdrivers And Screws To Help You To Remove And Install The Propellers..
Applicable Models: This Propellers Are Suitable For Dji Avata..
Features
- Upgraded Version: This propellers set has lighter weight and low noise design, it will make your DJI Avata drone flying more stable and quieter.
- Applicable Models: This propellers are suitable for DJI Avata.
- Features: Easy to install and remove, easy to carry. New aerodynamic design, excellent noise reduction performance, reduce wind resistance, and make your drone have a longer endurance time.
- Intall Tools: The package come with mini screwdrivers and screws to help you to remove and install the propellers.
- Package List: 8 propellers +2 screwdrivers+20 screws(Preventing missing screws). The drone is just to better display the product, it is not included in the package.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.18 x 5.75 x 2.87 Inches
See On Amazon #12
Air 3 Propellers LED Lights Blades Replacement Prop Low Noise Accessories for DJI Air 3 Drone (2 Pairs)
Asin: B0CPLTT11L | Model: For DJI Air 3 | PartNumber: For DJI Air 3 | Ean: 0768510489905 | UPC: 768510489905
Excellent Noise Reduction Performance: Made Of Transparent Pc Material, It Is Durable And Has Good Light Transmittance. The New Aerodynamic Design Brings Excellent Noise Reduction Effects. The Weight Of A Single Propeller Blade Is Approximately 13G, Light And Stable. After Multiple Flight Tests, The Flight Performance Of These Propeller Blades Is Almost The Same As Before, And It Will Not Affect The Endurance And Normal Flight Of The Dji Air 3 Drone..
Package Includes: 2 Pairs Propellers For Dji Air 3 Drone, 1 * Charging Cable, And 1 * Instruction Manual. (Excluding Drones And Other Accessories).
Rechargeable: Built-In Lithium Battery. Comes With A 1 To 4 Charging Cable. It Can Charge Four Blades At The Same Time. It Takes Only 30 Minutes To Fully Charge And Can Be Used For More Than 50 Minutes..
Awesome Night Light Show: The Dji Air 3 Propellers Has Three Light Modes That Can Be Freely Switched With Just One Click. By Using The Method Of Long Exposure Photography At Night, Beautiful Visual Images Can Be Obtained. At The Same Time, It Allows You To Take Off Or Land At Night For Better Observation Of The Surrounding Environment..
Features
- Perfect Match: Colorful LED propellers are specially designed for DJI Air 3 drone. Colorful lights make your drone look cooler at night and make your drone the brightest star in the night sky.
- Awesome Night Light Show: The DJI Air 3 propellers has three light modes that can be freely switched with just one click. By using the method of long exposure photography at night, beautiful visual images can be obtained. At the same time, it allows you to take off or land at night for better observation of the surrounding environment.
- Excellent Noise Reduction Performance: Made of transparent PC material, it is durable and has good light transmittance. The new aerodynamic design brings excellent noise reduction effects. The weight of a single propeller blade is approximately 13g, light and stable. After multiple flight tests, the flight performance of these propeller blades is almost the same as before, and it will not affect the endurance and normal flight of the DJI Air 3 drone.
- Rechargeable: Built-in lithium battery. Comes with a 1 to 4 charging cable. It can charge four blades at the same time. It takes only 30 minutes to fully charge and can be used for more than 50 minutes.
- Package Includes: 2 Pairs propellers for DJI Air 3 drone, 1 * charging cable, and 1 * instruction manual. (Excluding drones and other accessories)
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.87 x 8.66 x 1.26 inches | Weight: 0.03 pounds
See On Amazon #13
Craznick Charger Cable for DJI Mini 4 Pro/Mini 3 Pro/Mavic 3 Pro/Mini 2 SE/Air 3/Avata 2/Avata/FPV Accessories 3-in-2 Fast Charging Cable USB Type-C 5A Cord for DJI Drone Battery Charger 5FT
Asin: B0CLD6LTB4 | Model: CR20231019 | PartNumber: CR20231019 | Ean: 0768447921554 | UPC: 768447921554
【3-In-2】One Charging Cable Can Fulfill 3 Devices Charging At The Same Time, Easy To Carry And Save Charging Space..
【Packing List】Includes 1 * Charger Cable Only. The Power Cord Is 5.02 Inches Long With An Extended Fork End (9.44 Inches) For Easy Connection To Charging Devices Without Cluttering The Charging Area, Ensuring Convenience And Cleanliness..
【Durable And Reliable】Made Of High-Quality Nylon Braided Material, Can Be Bent Freely And Not Easy To Break. The Hidden Interface Is Equipped With A Lanyard, Anti-Detachment, Supports Fast Data Transfer..
【Fast Charging】Provides Up To 66W Of Charging Power And Supports 5A Fast Charging, Which Is Faster And More Efficient Than Standard 3A Fast Charging..
Features
- For All Type-C Ports Compatible with various devices with Type-C charging ports, such as DJI Avata 2, Mini 4 Pro, Mini 3 Pro, Mini 3, Mini 2 SE, Mini 2, Mini SE, Air 3, Air 2S, Mavic 2, Mavic 3, Mavic 3 Pro, Mavic 3 Pro Cine, Mavic 3 Classic, FPV, Avata Drone, RC, RC 2, RC Pro, RC-N1, RC-N2 Remote Controller, Avata Goggles 2, Integra battery and Osom Pocket, Action camera, motion controller charging, most smartphones, tablets, laptops, etc.
- Fast Charging Provides up to 66W of charging power and supports 5A fast charging, which is faster and more efficient than standard 3A fast charging.
- 3-in-2 One charging cable can fulfill 3 devices charging at the same time, easy to carry and save charging space.
- Durable and Reliable Made of high-quality nylon braided material, can be bent freely and not easy to break. The hidden interface is equipped with a lanyard, anti-detachment, supports fast data transfer.
- Packing List Includes 1 * charger cable only. The power cord is 5.02 inches long with an extended fork end (9.44 inches) for easy connection to charging devices without cluttering the charging area, ensuring convenience and cleanliness.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.39 x 59.06 x 0.39 inches | Weight: 0.12 pounds
See On Amazon #14
Drone Airdrop System for DJI Mini 4 Pro/Mini 3 Pro/Air 3/Mini 2 SE/Mavic 2/2S/Mavic 3 Pro Cine/Phantom 3 4/4 Pro Transport Release Delivery Payload Device for Wedding Scene Fishing Bait & Rescue
Asin: B0BZD3Q1QH | Model: M5 | PartNumber: M5 | Ean: 0768443636919 | UPC: 768443636919
Easy To Control: One-Button Operation Through The 2.4G Remote Controller. The Remote Control Distance Is 150 M. The Length Of The Velcro Strap Is 30Cm, Please Select Based On Your Drone Size..
Widely Used: You Can Send Wedding Rings, Gifts, And Flowers To Your Friends, Family, And Lovers On Any Unforgettable Day Such As Weddings, Halloween, Christmas, Or Valentine's Day To Create Surprises. It Can Also Be Used To Throw Bait, Throw Confetti At Beach Parties, Throw Balloons, Throw Rescue Supplies, Etc, Adding Unlimited Fun To Your Life..
Quick To Assemble: Velcro Installation Will Not Damage The Drone Body. Simply Thread A Velcro Strap Into The Adjuster Hole, Adjust It To A Suitable Position According To The Size Of Your Drone, And Fix It (The Strap Avoids The Drone Bottom Sensor). Hang The Matching Sling Onto The Thrower Lock To Load The Item (Hang It According To The Weight Of The Drone)..
Product Parameter: Maximum Load: 750G, Built-In Battery Capacity: 350Mah, Standby Time: About 12 Hours, Self-Charging Time: 1.5 Hours, Turn On Or Off Times(Full Charge Once): 600..
Features
- Widely Compatible: The drone dropping device suitable for most drones like for DJI Mini 4 Pro/Mini 3 Pro/Air 3/Mini 3/Mavic Mini/Mini 2/Mini SE/Mini 2 SE/Mavic Air 2/Air 2S/Mavic 3 Pro/Mavic 3/Classic/Cine/Spark/Mavic 2 Pro/Zoom/Mavic Pro/Fpv/Fimi X8SE/Phantom 3/4 Pro/Holystone HS720/720E/720G/HS440/RUKO F11S, Bwine F7GB2 drone, etc. It is almost suitable for drones with a load weight of over 100g.
- Product Parameter: Maximum Load: 750g, Built-in Battery Capacity: 350mAh, Standby Time: about 12 hours, Self-Charging Time: 1.5 hours, Turn On or Off Times(full charge once): 600.
- Easy to Control: One-button operation through the 2.4G remote controller. The remote control distance is 150 m. The length of the Velcro strap is 30cm, Please select based on your drone size.
- Quick to Assemble: Velcro installation will not damage the drone body. Simply thread a velcro strap into the adjuster hole, adjust it to a suitable position according to the size of your drone, and fix it (the strap avoids the drone bottom sensor). Hang the matching sling onto the thrower lock to load the item (hang it according to the weight of the drone).
- Widely Used: You can send wedding rings, gifts, and flowers to your friends, family, and lovers on any unforgettable day such as weddings, Halloween, Christmas, or Valentine's Day to create surprises. It can also be used to throw bait, throw confetti at beach parties, throw balloons, throw rescue supplies, etc, adding unlimited fun to your life.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.02 x 2.17 x 2.13 inches | Weight: 0.08 pounds
See On Amazon #15
Craznick Propellers for DJI Mavic 2 Pro/Mavic 2 Zoom Replacement Prop Blades Low Noise Accessories for DJI Mavic 2 Pro/Mavic 2 Zoom 8 Pack
Asin: B0C169FVHP | Model: CRM20331 | PartNumber: CRM20331 | Ean: 0768443636971 | UPC: 768443636971
Quick Release Design : Easy To Install And Remove, Easy To Carry. The Blade Adopts A Quick Release Design, You Could Install Or Remove The Propellers Easily Within Few Seconds..
Package List: 8 Pack Propellers For Dji Mavic 2 Pro / Mavic 2 Zoom Drone.(Excluding Drones).
Features: New Aerodynamic Design, Excellent Noise Reduction Performance, Reduce Wind Resistance, And Make Your Drone Have A Longer Endurance Time..
Upgraded Version: This Propellers Set Has Lighter Weight And Low Noise Design, It Will Make Your Drone Flying More Stable And Quieter..
Features
- Applicable Models: These blades design for DJI Mavic 2 Pro and Mavic 2 Zoom.
- Upgraded Version: This propellers set has lighter weight and low noise design, it will make your drone flying more stable and quieter.
- Quick Release Design : Easy to install and remove, easy to carry. The blade adopts a quick release design, you could install or remove the propellers easily within few seconds.
- Features: New aerodynamic design, excellent noise reduction performance, reduce wind resistance, and make your drone have a longer endurance time.
- Package List: 8 pack propellers for dji mavic 2 pro / mavic 2 Zoom drone.(Excluding drones)
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.31 x 7.87 x 4.72 inches
Warranty: NO
See On Amazon #16
32Pcs Propellers for DJI Mini 3 Replacement Prop Blades Low Noise Accessories for DJI Mini 3 Drone Accessories Exclusive Screws & Screwdrivers Orange Tips
Asin: B0BR7ZBR1R | Model: YFMN03O | PartNumber: YFMN03O | Ean: 0768443163545 | UPC: 768443163545
Features: Easy To Install And Remove, Easy To Carry. New Aerodynamic Design, Excellent Noise Reduction Performance, Reduce Wind Resistance, And Make Your Drone Have A Longer Endurance Time..
Package List: 32 Propellers (Orange Tips)+4 Screwdrivers+48 Screws(Preventing Missing Screws). The Drone Is Just To Better Display The Product, It Is Not Included In The Package..
Intall Tools: The Package Come With Mini Screwdrivers And Screws To Help You To Remove And Install The Propellers..
Applicable Models: This Propellers Are Suitable For Dji Mini 3. If You Need The Mini 3 Propellers, That Is B0b3mqcgq1（You Can Search The Asin On Amazon Or Choose It In Our Store）..
Features
- Upgraded Version: This propellers set has lighter weight and low noise design, it will make your drone flying more stable and quieter.
- Applicable Models: This propellers are suitable for DJI Mini 3. If you need the Mini 3 propellers, that is B0B3MQCGQ1 You can search the asin on Amazon or choose it in our store .
- Features: Easy to install and remove, easy to carry. New aerodynamic design, excellent noise reduction performance, reduce wind resistance, and make your drone have a longer endurance time.
- Intall Tools: The package come with mini screwdrivers and screws to help you to remove and install the propellers.
- Package List: 32 propellers (orange tips)+4 screwdrivers+48 screws(Preventing missing screws). The drone is just to better display the product, it is not included in the package.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.63 x 6.30 x 3.15 Inches
Warranty: No
See On Amazon #17
2 Pack Drone Strobe Light with 1 Pack Remote Control for DJI Avata 2/Mini 2 SE/Mini 3/Mini 4 Pro/Air 3 Mavic 2/2S/Mavic 3 Pro/Phantom 3 4/4 Pro Night Flight FAA Anti Collision Rechargable Led
Asin: B0BZ8GJPWP | Model: M3 | PartNumber: M3 | Ean: 0768443636858 | UPC: 768443636858
Widely Used: The Mini Strobe Light Use Velcro Or Rubber Ring To Mount The Strobe,Suitable For Most Drones Like For Dji Avata 2/Mini 4 Pro/Mini 3 Pro, Mini 3/Mavic Mini/Mini 2/Mini Se/Mini 2 Se/Air 3/Mavic Air 2/Air 2S/Mavic 3/Classic/Cine/Spark/Mavic 2 Pro/Zoom/Mavic Pro/Avata/Fpv/Fimi X8se/Phantom 3/4 Pro/Holystone Hs720/720E/720G/Hs440/Ruko F11s Drone, Etc. Meet With The Faa 107 Rules For Anti-Collision Lights When Flying Drones At Night..
Lightweight: 1.89In*1.35In*0.72In(4.8Cm*3.43Cm*1.84Cm), Only 17.8G (0.63Ounces). It Can Be Installed In Various Positions, Such As Bicycles, Motorcycles, Helmets, Tents, Remote Control Vehicles, Runniing Light Etc..
Rechargeable & Waterproof: Anti Collision Night Flight Led Built-In 350Mah Battery, Micro Usb Charging, And Come With Charging Cable. Fully Charged In Approximately 90 Minutes. Use Slow Flash For 16H, Fast Flash For 10H, And Constant Light For 2H. The Transparent Protective Shell Can Protect The Internal Battery And Circuit, But Will Not Reduce The Brightness Of The Light..
Super Bright：Craznick Drone Strobe Light Include 1 Pcs 15W And 8 Pcs 0.8W High Power Lamp Beads. More Than 3.7 Miles (6Km) Visible At Night. White, Red, Green, Blue, Yellow, Purple, Sky Blue 7 Colors. Three Modes Includes Fast Flash, Slow Flash, And Constant Light Circulate Replaces, Totaling 27 Lighting Modes. Make Your Drone Become The Brightest Star In The Night Sky..
Features
- Upgraded Remote Control Design: Compared to other ordinary drone night light, Craznick strobe lights are equipped with a 2.4G wireless remote controller, with an effective remote control distance of 50m. If you want to change the lighting mode, you don't need to land the drone, just use the remote control for simple operation.
- Super Bright Craznick drone strobe light include 1 pcs 15W and 8 pcs 0.8W high power lamp beads. More than 3.7 miles (6KM) visible at night. White, Red, Green, Blue, Yellow, Purple, Sky Blue 7 colors. Three modes includes fast flash, slow flash, and constant light circulate replaces, totaling 27 lighting modes. Make your drone become the brightest star in the night sky.
- Widely Used: The mini strobe light use velcro or rubber ring to mount the strobe,suitable for most drones like for DJI Avata 2/Mini 4 Pro/Mini 3 Pro, Mini 3/Mavic Mini/Mini 2/Mini SE/Mini 2 SE/Air 3/Mavic Air 2/Air 2S/Mavic 3/Classic/Cine/Spark/Mavic 2 Pro/Zoom/Mavic Pro/Avata/Fpv/Fimi X8SE/Phantom 3/4 Pro/Holystone HS720/720E/720G/HS440/RUKO F11S drone, etc. Meet with the FAA 107 rules for anti-collision lights when flying drones at night.
- Rechargeable & Waterproof: Anti collision night flight LED built-in 350mAH battery, Micro USB charging, and come with charging cable. Fully charged in approximately 90 minutes. Use slow flash for 16h, fast flash for 10h, and constant light for 2h. The transparent protective shell can protect the internal battery and circuit, but will not reduce the brightness of the light.
- Lightweight: 1.89in*1.35in*0.72in(4.8cm*3.43cm*1.84cm), only 17.8g (0.63ounces). It can be installed in various positions, such as bicycles, motorcycles, helmets, tents, remote control vehicles, runniing light etc.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.57 x 5.51 x 3.94 Inches | Weight: 0.04 Pounds
See On Amazon #18
Craznick Propeller Holder for DJI Air 3 Propellers Guard Strap Protector Stabilizer and Propellers Fixator for DJI Air 3 Drone Accessories
Asin: B0CGXCSN6G | Model: CR23083001 | PartNumber: CR23083001 | Ean: 0768447920892 | UPC: 768447920892
【Buckle Design】The Air 3 Propeller Fixator Buckle Strap Is Made Of Elastomeric Silicone And Has Two Holes, It Can Be Adjusted In Two Holes As Required. It Helps To Keep Drone Propellers From Damage During Storage Or Transportation..
【Right Choice】Just Buy A Craznick Propeller Holder To Fully Protect Your Dji Air 3 Drone. If You Have Any Questions, Please Feel Free To Contact Us. We Will Give You The Most Professional Answer In The Shortest Possible Time..
【Precisely Moulded】Integrated With The Fuselage Design, Which Effectively Protects And Does Not Affect The Installation Of The Original Gimbal Cover. Effectively Fix The Front And Rear Propellers, Protect The Propellers In The Folded And Stowed State, And Prevent The Propellers From Being Damaged When The Dji Air 3 Drone Is Put Into The Backpack..
【High Quality Propeller Guard】Made Of Abs+Silicone, Will Not Scratch And Squeeze The Body And Slender Blades. Soft And Elastic, Not Easy To Deform And Break, Durable. Soft Glue Can Be Twisted And Folded, Easy To Store And Save Space. Equipped With A Quick Release Buckle To Achieve Quick Disassembly And Assembly, Effectively Store The Blades, And Operate Portable..
Features
- Compatibility Propeller Holder is suitable for DJI Air 3 Drone.
- High Quality Propeller Guard Made of ABS+Silicone, will not scratch and squeeze the body and slender blades. Soft and elastic, not easy to deform and break, durable. Soft glue can be twisted and folded, easy to store and save space. Equipped with a quick release buckle to achieve quick disassembly and assembly, effectively store the blades, and operate portable.
- Buckle Design The Air 3 propeller fixator buckle strap is made of elastomeric silicone and has two holes, it can be adjusted in two holes as required. It helps to keep drone propellers from damage during storage or transportation.
- Precisely Moulded Integrated with the fuselage design, which effectively protects and does not affect the installation of the original Gimbal Cover. Effectively fix the front and rear propellers, protect the propellers in the folded and stowed state, and prevent the propellers from being damaged when the DJI Air 3 drone is put into the backpack.
- Right Choice Just buy a Craznick Propeller Holder to fully protect your DJI Air 3 drone. If you have any questions, please feel free to contact us. We will give you the most professional answer in the shortest possible time.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.97 x 3.86 x 1.97 inches
See On Amazon #19
Mavic 3 Pro/Mavic 3 Pro Cine Landing Gear Foldable Quick Release Extension Leg for DJI Mavic 3 Pro/Mavic 3 Pro Cine Accessories
Asin: B0C9PLGXHM | Model: CR230629 | PartNumber: CR230629 | Ean: 0768443637305 | UPC: 768443637305
【Protable】Easy To Install And Remove Without Any Installation Tools. Will Not Shake Or Fall Off During Flight. Foldable Design For Easy Storage..
【Sturdy And Durable】 Suitable For Taking Off On Grass, Sand, Mud, Etc. After The Landing Gear Is Installed, The Arms Of The Drone Can Still Be Opened Or Folded Normally. Please Note That The Drone Is Only For Better Display Of The Landing Gear, The Package Does Not Contain.Ote That The Drone Is Only For Better Display Of The Landing Gear, The Package Does Not Contain..
【Hollow-Carved Design】Won't Block The Power Indicator, Bottom Sensor, Cooling Vents. It Has No Effect On Your Drone Performance..
【Lightweight】This Mavic 3 Pro Landing Gear Weighs Only 40 G(1.41 Oz), Which Does Not Affect The Flight Endurance Of Mavic 3 Pro / Mavic 3 Pro Cine Series Drone Series Drone..
Features
- More Compatibility The Lightweight landing gear is designed for Mavic 3 Pro / Mavic 3 Pro Cine series drone. Effectively increase the height of 3cm(1.18 in), avoid ground debris or water stains from soiling or damaging the drone body, gimbal and propellers.
- Lightweight This Mavic 3 Pro landing gear weighs only 40 g(1.41 oz), which does not affect the flight endurance of Mavic 3 Pro / Mavic 3 Pro Cine series drone series drone.
- Protable Easy to install and remove without any installation tools. Will not shake or fall off during flight. Foldable design for easy storage.
- Hollow-carved Design Won't block the power indicator, bottom sensor, cooling vents. It has no effect on your drone performance.
- Sturdy and Durable Suitable for taking off on grass, sand, mud, etc. After the landing gear is installed, the arms of the drone can still be opened or folded normally. Please note that the drone is only for better display of the landing gear, the package does not contain.ote that the drone is only for better display of the landing gear, the package does not contain.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.57 x 5.12 x 3.35 inches | Weight: 0.09 pounds
See On Amazon #20
Gimbal Protector Cover for DJI Mini 3 Pro Lens Cover Dustproof Cap Compatible with DJI Mini 3 Pro RC Drone Accessories Replacement Part Gimbal Guard
Asin: B0B9NB4V2H | Model: 9266 | PartNumber: 9266 | Ean: 0768472204127 | UPC: 768472204127
【Doesn't Affect The Propellers Holder】Fits The Body Design, Is Stable, And Won't Loosen. Does Not Affect The Use Of Propeller Holders. Can Be Used With A Propeller Strap, And Does Not Affect The Use Of The Propeller Holder. Stored In The Bag, All-Around Protection For Your Dji Mini 3 Pro Drone..
【Lightweight】Only 15G. Made Of Lightweight Pp Transparent Material, Sturdy And Durable. Lightweight And Convenient, About The Same Size As The Original Lens Cover, Light And Convenient, You Can Carry It With You Without Affecting The Storage In The Original Case..
【Easy To Install And Remove】Fix The Gimbal, Snap The Top Of The Lens Cap Into The Body, And Snap The Bottom Of The Gimbal Protector Into The Bottom Of The Fuselage To Complete The Installation. Gently Push Up On The Bottom Buckle To Remove The Gimbal Cover. Very Simple And Convenient.
【Total Protection】 The Original Lens Cover Of Mini 3 Pro Can’T Protect The Front Sensor Lens, Exposing The Lens To The Outside, It Is Easy To Scratch The Lens, And Our Lens Cover Provides Professional Protection For Your Device From Bumps And Scratches, And Also Be Dustproof And Waterproof. Keep The Lens From Being Damaged, Always Brand New..
Features
- Designed for DJI Mini 3 Pro Drone Craznick gimbal protector is specially designed for DJI Mini 3 Pro Drone, with a translucent design, which is convenient for observing the protection status of the gimbal(Gimbal Cover only, nothing else included).
- Total protection The original lens cover of mini 3 Pro can t protect the front sensor lens, exposing the lens to the outside, it is easy to scratch the lens, and our lens cover provides professional protection for your device from bumps and scratches, and also be dustproof and waterproof. Keep the lens from being damaged, always Brand new.
- Doesn't Affect the Propellers holder Fits the body design, is stable, and won't loosen. Does not affect the use of propeller holders. Can be used with a propeller strap, and does not affect the use of the propeller holder. Stored in the bag, all-around protection for your DJI Mini 3 Pro Drone.
- Easy to Install and Remove Fix the gimbal, snap the top of the lens cap into the body, and snap the bottom of the gimbal protector into the bottom of the fuselage to complete the installation. Gently push up on the bottom buckle to remove the gimbal cover. Very simple and convenient
- Lightweight Only 15g. Made of lightweight PP transparent material, sturdy and durable. Lightweight and convenient, about the same size as the original lens cover, light and convenient, you can carry it with you without affecting the storage in the original case.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 2.28 x 2.95 x 2.80 Inches | Weight: 0.03 pounds
See On Amazon #21
Mini 4 Pro Accessories Bundle: with Propellers Blades Guard Landing Gear Gimbal Protector Leg Extensions Props Holder Strap Lens Cover for DJI Mini 4 Pro Drone Accessories Set
Asin: B0CYZQKP66 | Model: Cr2432501 | PartNumber: Cr2432501 | Ean: 0768510490741 | UPC: 768510490741
【Propeller Guard】The Propeller Protector Guard Adopts A Fortress-Style Design To Enclose The Propeller, Which Can Be Used Indoors Or Outdoors To Prevent Horizontal Collision During Flight, Thus Avoiding Hurting People Or Animals, Or Hitting Buildings Or Trees And Causing Crash Accidents..
【Gimbal Cover】Made Of High-Quality Pc Material Fits Perfectly On The Drone's Surface, Protecting The Lens And Front Sensor From Impacts, Scratches, Dust, And Water, Ensuring Safety During Transportation And Storage..
【Sled Type Landing Gear】Our Landing Gear Can Effectively Raise The Mini 4 Pro By 2.5 Centimeters, Suitable For Taking Off On Grass, Sand, Mud, And Other Surfaces, Easy To Install And Remove, No Need To Worry About Wobbling Or Falling Off When Flying. After Installing The Landing Gear, The Arms Of The Drone Can Still Be Opened Or Folded Normally..
【Low Noise Blades & Propeller Holer】The Propellers Are Tested Before Sale, Lightweight, Good Quality, And Low-Noise, Their Performance Is Almost The Same As The Original Blades. The Propeller Straps Can Fully Protect The Bottom Of The Drone And The Vision System, Are Easy To Install And Remove, Save Storage Space, And Avoid Propeller Damage During Storage..
Features
- Perfect Combination This Mini 4 Pro accessory kit includes 8 PCS low-noise propellers (with 1 screwdriver) + 1 PCS propeller protector strap + 4 PCS props guard + 1 PCS landing gear + 1 PCS gimbal cover, which is customized and designed specifically for DJI Mini 4 Pro and protects your drone in all aspects in just one kit. (Drone not included)
- Low Noise Blades & Propeller Holer The propellers are tested before sale, lightweight, good quality, and low-noise, their performance is almost the same as the original blades. The propeller straps can fully protect the bottom of the drone and the vision system, are easy to install and remove, save storage space, and avoid propeller damage during storage.
- Propeller Guard The propeller protector guard adopts a fortress-style design to enclose the propeller, which can be used indoors or outdoors to prevent horizontal collision during flight, thus avoiding hurting people or animals, or hitting buildings or trees and causing crash accidents.
- Sled Type Landing Gear Our landing gear can effectively raise the Mini 4 Pro by 2.5 centimeters, suitable for taking off on grass, sand, mud, and other surfaces, easy to install and remove, no need to worry about wobbling or falling off when flying. After installing the landing gear, the arms of the drone can still be opened or folded normally.
- Gimbal Cover Made of high-quality PC material fits perfectly on the drone's surface, protecting the lens and front sensor from impacts, scratches, dust, and water, ensuring safety during transportation and storage.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 2.87 x 3.58 x 3.15 inches
See On Amazon #22
Craznick Landing Gear Extensions for DJI Mini 4 Pro Drone Heightening Bracket Leg Support Protector
Asin: B0CP7SH7YH | Model: Mini 4 Pro Landing gear | PartNumber: Mini 4 Pro Landing gear | Ean: 0768510489875 | UPC: 768510489875
Enhanced Stability: The Triangular Structure Design Of The Landing Gear Front Legs Provides Added Durability And Stability, Offering More Reliable Support For Flight..
Lightweight Design: Our Mini 4 Pro Extended Landing Gear Weighs Approx 21G, Ensuring It Doesn't Affect The Drone's Flight Performance And Endurance. (Note: Only The Landing Gear Is Included, Other Accessories Are Not Included.).
Convenient Installation: This Mini 4 Pro Landing Gear Features A Snap On Design, Making It Easy To Install And Detach. It Fits Snugly To The Body And Will Not Shake Or Detach During Flight..
Effective Height Increase: Our Extended Landing Gear Raises The Distance Between The Drone Body And The Ground By Approximately 25Mm, Preventing Dirt Or Damage To The Body And Sensors During Takeoff And Landing, Keeping Your Drone Clean..
Features
- Compatibility: Designed specifically for DJI Mini 4 Pro drone, this extended landing gear allows for takeoff and landing in uneven ground conditions, effectively protecting the front/rear legs from ground friction and ensuring the safety of the drone body.
- Effective Height Increase: Our extended landing gear raises the distance between the drone body and the ground by approximately 25mm, preventing dirt or damage to the body and sensors during takeoff and landing, keeping your drone clean.
- Enhanced Stability: The triangular structure design of the landing gear front legs provides added durability and stability, offering more reliable support for flight.
- Convenient Installation: This Mini 4 Pro landing gear features a snap on design, making it easy to install and detach. It fits snugly to the body and will not shake or detach during flight.
- Lightweight Design: Our Mini 4 Pro extended landing gear weighs approx 21g, ensuring it doesn't affect the drone's flight performance and endurance. (Note: Only the landing gear is included, other accessories are not included.)
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.98 x 2.17 x 1.77 inches | Weight: 0.05 Pounds
See On Amazon #23
Avata Propeller Guard Bumper: Protective Bumper Ring Anti-Collision Impact Protectors for DJI Avata Accessories Orange
Asin: B0BPHKZWDP | Model: CRAV01O | PartNumber: CRAV01O | Ean: 0768459717701 | UPC: 768459717701
【High-Quality Material】High Toughness Material, Fine Workmanship, Comfortable, Wear-Resistant, And Durable. It Is Equipped With Paste Reinforcement Mud, Which Is Stable Free Of Glue, And Easy To Install And Remove..
【Package List】1 Set Dji Avata Propeller Guard Bumper. （Excluding Drones）.
【Effective Protection】Install The Impact Protectors With The Dji Avata Propeller Guard To Prevent Scratching And Damage To The Blade Guard. Effectively Prevent And Avoid Serious Consequences Such As Collisions, Injuries, Or Damage To Blade Protectors Caused By High-Speed Rotating Blades..
【Lightweight Design】The Whole Set Weighs Only 19 Grams, Which Is Much Lighter Than Similar Products On The Market, And Does Not Affect The Normal Flight Of The Dji Avata Drone..
Features
- Designed for DJI Avata Drone This is a propeller guard bumper specially designed for DJI Avata drone replacement parts accessory.
- Lightweight Design The whole set weighs only 19 grams, which is much lighter than similar products on the market, and does not affect the normal flight of the DJI Avata drone.
- High-Quality Material High toughness material, fine workmanship, comfortable, wear-resistant, and durable. It is equipped with paste reinforcement mud, which is stable free of glue, and easy to install and remove.
- Effective Protection Install the impact protectors with the DJI Avata propeller guard to prevent scratching and damage to the blade guard. Effectively prevent and avoid serious consequences such as collisions, injuries, or damage to blade protectors caused by high-speed rotating blades.
- Package List 1 Set DJI Avata propeller guard bumper. Excluding Drones
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.63 x 7.87 x 4.72 inches
See On Amazon #24
Craznick Universal Drone Megaphone for Mini 4 Pro/Mavic 3 Pro/Air 3/2S Series Drone Accesorios Wireless Mini Speaker Compatible with RC Car Portable Drone Loudspeaker Amplification
Asin: B0CQXL4XT4 | Model: M2 | PartNumber: M2 | Ean: 0768510490000 | UPC: 768510490000
【Remote Communication】The Universal Drone Speaker Adopts 400-480Mhz Infinite Frequency Band, Speaker Up To 100 Decibels, Powerful Ultra Far Amplification Function, Strong Penetration, Built-In Voice Decoding Chip, Stable Sound Quality..
【You Will Get】1*Speaker, 1*Microphone, 1*Usb Charging Cable, 1*Velcro, 1*Instruction Manual..
【Strong Endurance】Speaker Built-In 3.7V 250Mah High-Capacity Lithium Battery, Microphone With 3.7V 150Mah Battery, About 30 Minutes Fully Charged, Long Battery Life, Can Be Continuously Shouting About 3 Hours. The Microphone Is Designed To Clip On The Clothes, Easy To Talk And Does Not Affect The Control Of The Drone..
【High Quality】Made Of Abs Material, The Speaker Weighs About 49 Grams, Lightweight And Wear-Resistant, Easy To Carry Outdoors, With Velcro At The Bottom, It Won't Cause Wear And Tear To The Drone, And Won't Affect The Drone's Endurance Time..
Features
- Widely applicable Suitable for all models of drones and RC car speakers, such as DJI Mini 3 Pro, Mini 4 Pro, Mini 3, Mini 2, Mini 2 SE, Mini SE, Air 3, Air 2S, Mavic 2, Mavic 2 Pro, Mavic Pro, Mavic 3, Mavic 3 Pro Cine, Mavic 3 Classic, FPV, FIMI X8SE, Phantom 3/4 Pro, Holystone HS720/720E/720G/HS440/RUKO F11S drone, etc. It can also be widely used in other scenarios.
- High Quality Made of ABS material, the speaker weighs about 49 grams, lightweight and wear-resistant, easy to carry outdoors, with Velcro at the bottom, it won't cause wear and tear to the drone, and won't affect the drone's endurance time.
- Remote Communication The universal drone speaker adopts 400-480MHZ infinite frequency band, Speaker up to 100 decibels, powerful ultra far amplification function, strong penetration, built-in voice decoding chip, stable sound quality.
- Strong endurance Speaker built-in 3.7V 250mAh high-capacity lithium battery, microphone with 3.7V 150mAh battery, about 30 minutes fully charged, long battery life, can be continuously shouting about 3 hours. The microphone is designed to clip on the clothes, easy to talk and does not affect the control of the drone.
- You will get 1*Speaker, 1*Microphone, 1*USB charging cable, 1*Velcro, 1*Instruction manual.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.57 x 2.87 x 2.56 inches | Weight: 0.11 pounds
See On Amazon #25
Sun Hood & Screen Protector Film & Joysticks 3 in 1 for DJI Mavic 3 Pro/Mini 3/Mini 3 Pro/Mavic 3/Mavic 3 Classic/Mavic 3 Cine/Air 2/ Air 2S RC Remote Controller Sunshade Accessories
Asin: B0CC9JQT7B | Ean: 0768443637398 | UPC: 768443637398
【Sun Hood】It Is Not Only A Sun Hood, But Also A Reliable Protective Case, Which Closely Fits The External Structure Of The Remote Control, Effectively Preventing Screen Pressure And Scratches, And Avoiding Accidental Touch Of Buttons. Adopting Two-Stage Shading Adjustment, It Provides More Flexible Viewing Angle, And The Precise Hole Position Will Not Interfere With The Antenna Signal And Speaker Holes. It Can Be Easily Stored In The Storage Bag Without Removing The Protective Cover..
【Remote Control Stick】Weighing Only 2 Grams, It Can Be Easily Stored In The Remote Control Like The Original Handle. Non-Slip Knurled Ergonomic Design Ensures A Comfortable Grip. Precision Cnc Manufacturing, High Hardness Aluminum Alloy Material, Anodized Surface To Enhance Durability And Better Using Experience..
【Screen Protector】9H Ultra-High Hardness, Effectively Prevent The Screen From Cracking And Shattering, One More Layer Of Protection For The Remote Control. 1:1 Precision Cutting, Fit The Screen Corners Rounded And Not Scratching, No Dust, Not Blocking The Screen. The Transparent Lens Film Restores True Colors Without Affecting The Sensitivity Of The Touch Screen, And It Feels Like There Is No Film Attached. Adsorption Technology, Without Any Adhesive, Easy To Adsorb Without Bubbles..
【Widely Application】3-In-1 Accessory Package Designed Specifically For Multiple Dji Remote Controls, Including Mavic 3 Pro/Mini 3 Pro/Magic 3/Mavic 3 Classic/Magic 3 Cine/Air 2/Air 2S, Giving You More Options. (Not Applicable To Dji Rc Pro And Dji Rc-N1).
Features
- Perfect Combination This remote control accessory set includes 1 Pcs sun hood (hand screw * 2), 2 Pcs Screen Protector(alcohol cotton dry and wet bag * 2+dust removal sticker * 2), 2 Pcs Joysticks (excluding the remote control).
- Widely Application 3-in-1 accessory package designed specifically for multiple DJI remote controls, including Mavic 3 Pro/Mini 3 Pro/Magic 3/Mavic 3 Classic/Magic 3 Cine/Air 2/Air 2S, giving you more options. (Not applicable to DJI RC PRO and DJI RC-N1)
- Sun Hood It is not only a sun hood, but also a reliable protective case, which closely fits the external structure of the remote control, effectively preventing screen pressure and scratches, and avoiding accidental touch of buttons. Adopting two-stage shading adjustment, it provides more flexible viewing angle, and the precise hole position will not interfere with the antenna signal and speaker holes. It can be easily stored in the storage bag without removing the protective cover.
- Screen Protector 9H ultra-high hardness, effectively prevent the screen from cracking and shattering, one more layer of protection for the remote control. 1:1 precision cutting, fit the screen corners rounded and not scratching, no dust, not blocking the screen. The transparent lens film restores true colors without affecting the sensitivity of the touch screen, and it feels like there is no film attached. Adsorption technology, without any adhesive, easy to adsorb without bubbles.
- Remote Control Stick Weighing only 2 grams, it can be easily stored in the remote control like the original handle. Non-slip knurled ergonomic design ensures a comfortable grip. Precision CNC manufacturing, high hardness aluminum alloy material, anodized surface to enhance durability and better using experience.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.96 x 6.89 x 4.90 inches
See On Amazon #26
Craznick Landing Gear for DJI Mini 4 Pro with Flash LED Lights Foldable Extended Landing Legs Protector Kit for DJI Mini 4 Pro Drone Accessories
Asin: B0CRPC3198 | Model: Mini 4 Pro | PartNumber: Mini 4 Pro | Ean: 0768510490147 | UPC: 768510490147
【Effective Protection】The Landing Gear Effectively Increases The Height Of The Mini 4 Pro Drone By 20 Millimeters (0.78 Inches). Whether Flying At Night Or On Rough Surfaces Such As Grass Or Sand, Our Drones Can Take Off And Land Smoothly, Effectively Preventing Ground Debris Or Water Damage From Soiling Or Damaging The Fuselage, Gimbal, Sensors, And Propellers..
【Lightweight & Foldable】The Lightweight Led Landing Gear Weighs Only 18.5 Grams, It Will Not Affect The Flight Endurance Of The Dji Mini 4 Pro Drone. It Is Stable And Does Not Shake Or Fall Off During Flight. Adopting A Foldable And Quick Detachable Design, With The Landing Gear Installed, The Drone's Arms Can Still Be Opened Or Folded Normally..
【Fast Charging】The Built-In Battery Can Be Recharged And Used On A Cycle, Fast Charging Only Takes 30 Minutes, And A Full Charge Can Be Used For About 60 Minutes..
【Colorful Flashing】Dji Mini 4 Pro Landing Gear Has Yellow, Green, And Blue Mixed-Color Lights, Providing Three Flashing Modes: Fast Flash, Slow Flash, And Constant Light. Dazzling Lights Add Personality To The Drone And Help You Better Observe Your Surroundings When Flying Or Landing At Night To Ensure Flight Safety..
Features
- Compatibility The landing gear specially designed for DJI Mini 4 Pro drone, won't block the indicator lights, fill-in lights, sensors and heat sinks. When flying or landing at night, you can have a better view of your surroundings.
- Colorful Flashing DJI Mini 4 Pro landing gear has yellow, green, and blue mixed-color lights, providing three flashing modes: fast flash, slow flash, and constant light. Dazzling lights add personality to the drone and help you better observe your surroundings when flying or landing at night to ensure flight safety.
- Effective Protection The landing gear effectively increases the height of the Mini 4 Pro drone by 20 millimeters (0.78 inches). Whether flying at night or on rough surfaces such as grass or sand, our drones can take off and land smoothly, effectively preventing ground debris or water damage from soiling or damaging the fuselage, gimbal, sensors, and propellers.
- Fast Charging The built-in battery can be recharged and used on a cycle, fast charging only takes 30 minutes, and a full charge can be used for about 60 minutes.
- Lightweight & Foldable The lightweight LED landing gear weighs only 18.5 grams, it will not affect the flight endurance of the DJI Mini 4 Pro drone. It is stable and does not shake or fall off during flight. Adopting a foldable and quick detachable design, With the landing gear installed, the drone's arms can still be opened or folded normally.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.57 x 4.25 x 3.54 Inches
See On Amazon #27
FPV Arm Bracers for DJI FPV Drone Accessories 1 Pairs DJI FPV Drone Arm Bracers
Asin: B0BPHTXQKX | Model: CRFPV01 | PartNumber: CRFPV01 | Ean: 0768459717732 | UPC: 768459717732
【Triangle Shockproof】The Fpv Arm Sleeve And The Drone Arm Form A Triangle To Enhance The Strength Of The Fpv Drone Arm, Effectively Protects The Arm And Reduces The Probability Of Damage To The Arm Under Extreme Conditions.
【Package List】2 * Fpv Arm Bracers, 2 * Screws, 1 * Special Screwdriver.
【Lightweight Design】The Whole Set Weighs Only 30 Grams, Which Is Much Lighter Than Similar Products On The Market, And Does Not Affect The Normal Flight Of The Dji Fpv Drone.
【High Quality Material】High Toughness Material, Fine Workmanship, Comfortable, Wear-Resistant And Durable. Easy To Install And Remove.
Features
- Designed for DJI FPV Drone Very suitable for DJI FPV drone
- High Quality Material High toughness material, fine workmanship, comfortable, wear-resistant and durable. Easy to install and remove
- Triangle Shockproof The FPV arm sleeve and the drone arm form a triangle to enhance the strength of the FPV drone arm, effectively protects the arm and reduces the probability of damage to the arm under extreme conditions
- Lightweight Design The whole set weighs only 30 grams, which is much lighter than similar products on the market, and does not affect the normal flight of the DJI FPV drone
- Package List 2 * fpv arm bracers, 2 * screws, 1 * special screwdriver
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.18 x 7.87 x 3.93 inches
Warranty: No
See On Amazon #28
Propeller Guard for DJI Air 3 Drone Quick Release Prop Blade Guard Professional DJI Air 3 Accessories
Asin: B0CHJM3DCD | Model: Protection d'hélice | PartNumber: Protection d'hélice | Ean: 0768447921103 | UPC: 768447921103
Easy Installation: The Propeller Guard Adopts A Buckle Design, Which Is Convenient And Easy To Install, And Will Not Scratch The Dji Air 3 Drone Body. (Note: According To The Forward Direction Of The Drone, The Bottom Of Each Propeller Guard Is Marked With The Number A/A-1/B/B-1, Please Install It In The Corresponding Position)..
Package List: 1 Set Dji Air 3 Propeller Guard. (Excluding Drones)..
Lightweight Design: The Whole Set Weighs Only 72 Grams (0.16 Pounds), Which Is Much Lighter Than Similar Products On The Market, And Does Not Affect The Normal Flight Of The Dji Air 3 Drone..
Unique Design: The Shape Of The Propeller Guard Adopts A Fortress Design, Which Can Improve Toughness. Detach The Propeller From The Outside To Prevent Scratching And Damage To The Blades. Effectively Prevent And Avoid Serious Consequences Such As Collisions, Injuries Or Damage To Blades Caused By High-Speed Rotating Blades..
Features
- Designed for DJI Air 3 Drone: This is a propeller guard specially designed for DJI Air 3 drone replacement parts accessory.
- Unique Design: The shape of the propeller guard adopts a fortress design, which can improve toughness. Detach the propeller from the outside to prevent scratching and damage to the blades. Effectively prevent and avoid serious consequences such as collisions, injuries or damage to blades caused by high-speed rotating blades.
- Easy Installation: The propeller guard adopts a buckle design, which is convenient and easy to install, and will not scratch the DJI Air 3 drone body. (Note: According to the forward direction of the drone, the bottom of each propeller guard is marked with the number A/A-1/B/B-1, please install it in the corresponding position).
- Lightweight Design: The whole set weighs only 72 grams (0.16 pounds), which is much lighter than similar products on the market, and does not affect the normal flight of the DJI Air 3 drone.
- Package List: 1 Set DJI Air 3 Propeller Guard. (Excluding Drones).
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 0.87 x 10.63 x 6.85 inches
See On Amazon #29
Craznick Propeller Holder for Air 3 Blades Guard Props Strap Protector Stabilizer Fixator Compatible with DJI Air 3 Drone Accessories
Asin: B0CWTYJSHZ | Model: Air 3 Propeller Holder | PartNumber: Air 3 Propeller Holder | Ean: 0768510490659 | UPC: 768510490659
【High-Quality Material】This Air 3 Propeller Strap Is Made Of A High-Quality Silicone Propeller Belt, It Is Soft, Elastic, Durable, Not Easily Deformed Or Broken, And Will Not Compress The Blade Or Scratch The Body..
【Convenient Storage】It Can Be Directly Placed Into Various Bags Without The Need To Remove The Air 3 Props Holder. It Protects The Propeller While Folding And Storing The Drone, Preventing Damage To The Propeller When The Air 3 Drone Is Placed In The Backpack..
【Precision Molding】This Air 3 Blades Holder Is Designed With A Semi-Enclosed Chassis Cover Design To Ensure That The Locking Position Does Not Compress The Propeller, Effectively Protects The Bottom Camera And Propeller Of The Drone, Anti-Knock Dustproof Bottom Cover, Does Not Affect The Original Lens Cap Installation..
【Anti Detachment Design】Adopting A Limit Design To Prevent The Propeller Strap From Loosening, Equipped With A Quick-Release Buckle For Easy Installation And Disassembly, Effectively Protecting The Propeller From Damage During Storage Or Transportation..
Features
- Compatibility The propeller holder is suitable for DJI Air 3 drones. (Note: only propeller holder is included, drones are not)
- Anti detachment Design Adopting a limit design to prevent the propeller strap from loosening, equipped with a quick-release buckle for easy installation and disassembly, effectively protecting the propeller from damage during storage or transportation.
- High-quality Material This air 3 propeller strap is made of a high-quality silicone propeller belt, it is soft, elastic, durable, not easily deformed or broken, and will not compress the blade or scratch the body.
- Precision Molding This air 3 blades holder is designed with a semi-enclosed chassis cover design to ensure that the locking position does not compress the propeller, effectively protects the bottom camera and propeller of the drone, anti-knock dustproof bottom cover, does not affect the original lens cap installation.
- Convenient Storage It can be directly placed into various bags without the need to remove the air 3 props holder. It protects the propeller while folding and storing the drone, preventing damage to the propeller when the Air 3 drone is placed in the backpack.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 3.78 x 3.35 x 3.07 inches | Weight: 0.07 pounds
See On Amazon #30
Propeller Guard for Mini 4 Pro Quick Release Removable Prop Blade Protector Compatible with DJI Mini 4 Pro Accessories
Asin: B0CMH9KN5Y | Model: Mini 4 Pro Propeller Guard | PartNumber: Mini 4 Pro Propeller Guard | Ean: 0768447921974 | UPC: 768447921974
【High Quality Material】Made Of High Quality Abs Material, It Is Durable And Not Easy To Deform, And Has Excellent Impact And Pressure Resistance, Which Will Not Affect The Normal Flight Of Mini 4 Pro..
【Lightweight And Easy To Carry】The Protective Cover Is Lightweight (Approximately 49G/0.108 Pounds ), Which Will Not Overburden The Drone And Will Not Affect The Flight Time And Flight Stability. Meanwhile, The Protective Cover Can Be Disassembled Into Four Parts, Small Size, Easy To Store And Carry For Traveling..
【Quick Installation】The Propeller Protector Adopts Convenient Buckle Design, Easy To Install And Remove, The Front And Rear Connection Structure Increases Stability And Anti-Collision Ability, And Won't Scratch The Drone Fuselage..
【Special Design】The Shape Of The Propeller Protector Is Designed With A Fortress-Like Profile, Which Enhances Toughness And Effectively Cushions Impacts To Provide Optimal Protection For The Propellers. It Also Improves The Adaptability Of The Mini 4 Pro Drone To The Ground When Taking Off And Landing, Reducing The Risk Of Damage And Injury..
Features
- Compatibility Propeller protective cover designed specifically for DJI Mini 4 Pro drones.
- Special Design The shape of the propeller protector is designed with a fortress-like profile, which enhances toughness and effectively cushions impacts to provide optimal protection for the propellers. It also improves the adaptability of the Mini 4 Pro drone to the ground when taking off and landing, reducing the risk of damage and injury.
- High quality material Made of high quality ABS material, it is durable and not easy to deform, and has excellent impact and pressure resistance, which will not affect the normal flight of Mini 4 Pro.
- Quick Installation The propeller protector adopts convenient buckle design, easy to install and remove, the front and rear connection structure increases stability and anti-collision ability, and won't scratch the drone fuselage.
- Lightweight and Easy to Carry The protective cover is lightweight (approximately 49g/0.108 pounds ), which will not overburden the drone and will not affect the flight time and flight stability. Meanwhile, the protective cover can be disassembled into four parts, small size, easy to store and carry for traveling.
- See more on Amazon...
Brand: Craznick | Manufacturer: Craznick
Dimensions: 1.97 x 6.30 x 5.91 inches | Weight: 0.07 pounds
See On Amazon