DPTOOL - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling from DPTOOL on Amazon
- DPTOOL 6PCS Camshaft Phaser Timing Chain Tools for VW Jeep Chrysler Dodge 3.6L Pentastar 10200A+1020...
- External Torx Plus Socket Set 6 Point EP Socket EP4, EP5, EP6, EP7, EP8, EP10, EP11, EP12, EP14, EP1...
- Oil Drain Plug No Leak 06L103801 6 Pack with Oil Drain Plug Removal Tool Compatible with Volkswagen ...
- Harmonic Balancer Damper Pulley Remove Extractor Kit Compatible with Ford, GM, Chrysler, Cadillac, C...
- Fuel Tank Lock Ring Tool Fuel Pump Senders Removal Install Tools Compatible with Ford Chrysler Dodge...
- Fuel Injector Puller Removal Set Injector Seal Installer Service Tool Kit Compatible with Audi VW 1....
- DPTOOL Engine Timing Kit Compatible with Ford Mazda Camshaft Flywheel Locking Tools 1.4 1.6 1.8 2.0 ...
- 14mm Magnetic Thin Walled Spark Plug Socket Universal Joint 3/8-Inch Drive 12 point Swivel Socket Re...
- DPTOOL Fuel Injector Install & Remove Tool For BMW N20 N55 Automotive Engine Timing Tool Kit Fuel In...
- Dual Clutch Transmission Clutch Motor Electromechanical Unit Unlock Tool Actuator Reset Tool Compati...
#1
DPTOOL 6PCS Camshaft Phaser Timing Chain Tools for VW Jeep Chrysler Dodge 3.6L Pentastar 10200A+10202 10369 Cam Locking Tool
Asin: B07RNNXJ3N | Model: HT-10200A-201901 | PartNumber: HT-10200A-201901 | Ean: 0053742462261 | UPC: 053742462261
2012 And Newer Models Also Require 10369A..
Some 2011 Models May Also Require 10369A, Depending On The Size Of Bolt In The Front Cover Tightening Sequence On The Right Bank (Cylinder Head Closest To Firewall). If That Bolt Head Is 13Mm You Need 10369A..
Note: 10200-1 & 10200-3 Are Used On Drivers Side, 10200-2 Is Used On Passenger's Side..
10200A-Used As Wedges To Loosen The Tension On The Timing Chains During Camshaft And Phaser Service Procedures On Routan 3.6 Liter Engine..
Features
- 10202- Used to hold the Camshaft/Phaser`s while performing the loosening and tightening of the Oil Control Valves during survice on Routan with 3.6 liter Engine
- 10200A-Used as wedges to loosen the tension on the Timing Chains during Camshaft and Phaser service procedures on Routan 3.6 liter Engine.
- 2012 and newer models also require 10369A.
- Note: 10200-1 & 10200-3 are used on Drivers Side, 10200-2 is used on Passenger's Side.
- Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you need 10369A.
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 1.18 x 9.84 x 3.94 Inches
See On Amazon #2
External Torx Plus Socket Set 6 Point EP Socket EP4, EP5, EP6, EP7, EP8, EP10, EP11, EP12, EP14, EP16, EP18, EP20, EP22, EP24, EP26, EP28, EP30, EP32 with 1/2'' 3/8'' 1/4'' Dr E-Torx Plus Socket 19pc
Asin: B0BJVS5YCX | Model: E-Torx Plus | PartNumber: E-Torx Plus
With Battery Pack Removal Socket: This Kit Include 5 Point Ep8.8 With 1/2'' Drive, This Ep Socket Specially To Remove Battery Cover, Compatible With Tesla.
Heavy Duty Ep Socket: The Ep Socket Made Of High Quality Hard Steel, And You Can Use Impact Wrench Or Air Tool.
Widly Use: This External Torx Plus Socket Different From Standard Torx Socket, They Can Perfect Replace The Standard Torx Socket, Have All The Function Of Standard Torx, In Addition, They Can Remove And Install The New Fastener Inverted Torx Plus Bolt, That Is The Standard Torx Socket Can't Work. For Example: Ep20 Use For Altima And Rogue Head Bolts Compatible With Nissan; Ep22 Use For Remove Motor Mounts Compatible With Honda Civic; Ep24 Used On The Bed Bolts Compatible With Ford.
Specification: This Kit Includ 19Pc Different Size External Torx Plus Socket, 6 Point Ep4, Ep5, Ep6, Ep7, Ep8 With 1/4'' Drive; 6 Point Ep10, Ep11, Ep12, Ep14, Ep16 With 3/8'' Drive; 6 Point Ep18, Ep20, Ep22, Ep24, Ep26, Ep28, Ep30, Ep32 With 1/2'' Drive; 5 Point Ep8.8 With 1/2'' Drive.
Features
- External Torx Plus Socket: Now many vehicle use a new-fangled fastener that has put you in a pickle, because the standard torx socket can't remove install that new style fasteners. Only this new external torx plus socket could fit it, and this EP socket is a must tool for auto
- Specification: This kit includ 19pc different size external torx plus socket, 6 point EP4, EP5, EP6, EP7, EP8 with 1/4'' drive; 6 point EP10, EP11, EP12, EP14, EP16 with 3/8'' drive; 6 point EP18, EP20, EP22, EP24, EP26, EP28, EP30, EP32 with 1/2'' drive; 5 point EP8.8 with 1/2'' drive
- With Battery Pack Removal Socket: This kit include 5 point EP8.8 with 1/2'' drive, this EP socket specially to remove battery cover, compatible with Tesla
- Widly Use: This external torx plus socket different from standard torx socket, they can perfect replace the standard torx socket, have all the function of standard torx, in addition, they can remove and install the new fastener inverted torx plus bolt, that is the standard torx socket can't work. for example: EP20 use for Altima and Rogue head bolts compatible with Nissan; EP22 use for remove motor mounts compatible with Honda Civic; EP24 used on the bed bolts compatible with Ford
- Heavy Duty EP Socket: The EP socket made of high quality hard steel, and you can use impact wrench or air tool
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #3
Oil Drain Plug No Leak 06L103801 6 Pack with Oil Drain Plug Removal Tool Compatible with Volkswagen 1.8L 2.0L Petrol Replacement for Audi Golf Passat
Asin: B0991PNQD7 | Model: H210709 | PartNumber: H210709
Makes Oil Changes Easy: This Kit Include 6 Oil Drain Plug And 1 Oil Drain Key Tool, The Key Fits Plug Perfectly And Work Great, The Tool Easy To Use, Needn't Use Flathead Screwdriver Or More Tool.
Note: If The Rubber O-Ring Have Deformed Or Swell, Please Replace A New Oil Drain Plug. Because The Deformed Or Swell Rubber O-Ring Will Result Leak.
Tips: Please Use Key Tool Align The Drain Plug Notch, Or Spin The Key Make Key Top Align The Notch, If Not Align, The Key Easy Broken.
No Leak: Oil Drain Plug Have A Tightness Rubber O-Ring, They Can Effectively Stopped The Oil Drip, This Is A Must Tool For Replace Oil.
Features
- Application: This oil drain plug compatible with Volkswagen 1.8L 2.0L,OEM Equivalent Part Number:06L103801. compatible with Audi A3 A4 A5 A6 Q7 S3 TT; compatible with Volkswagen Beetle, Golf/ GTI/ SPORTWAGEN/ PASSAT;compatible with TIGUAN
- No Leak: oil drain plug have a tightness rubber o-ring, they can effectively stopped the oil drip, this is a must tool for replace oil
- Makes Oil Changes Easy: this kit include 6 oil drain plug and 1 oil drain key tool, the key fits plug perfectly and work great, the tool easy to use, needn't use flathead screwdriver or more tool
- Tips: please use key tool align the drain plug notch, or spin the key make key top align the notch, if not align, the key easy broken
- Note: if the rubber o-ring have deformed or swell, please replace a new oil drain plug. because the deformed or swell rubber o-ring will result leak
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #4
Harmonic Balancer Damper Pulley Remove Extractor Kit Compatible with Ford, GM, Chrysler, Cadillac, Chevy Trucks, Mitsubishi, Upgraded Version 3 Jaw Puller
Asin: B08M3XFCV1
Function: Designed For Removing Damper Pulleys In Tight Engine Compartments Without Removing The Radiator. This Pulley Is Hard To Access And Remove Dute To Space Limitations In And Around The Engine Compartment.
Tips: If You Try The 3-Jaw Puller Is Not Fit You Car, You Need Replace Another 3 Jaw.
Quality Guarante: Our Harmonic Damper Pulley Tool Made Of High Quality Steel, High Hardness, Not Easy To Break, The Exterior Is Coated With Black Antioxidant Layer, Extended Service Life, And We Offer 12 Month Warranty.
Application: Gm 5.7L V8; Gm 2000 And Newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8;Cadillac 4.5L, 4.6L, And 4.9L V8; Compatible With Chevrolet Trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4; Compatible With Ford (1995-) V8 Engine; Mitsubishi Eclipse (1995 - ) 2.0L Dohc Non-Turbo.
Features
- Upgraded Version: Our harmonic damper pulley tool have 6 jaw, 3 thicker jaw fit old vehicle models, 3 thiner fit newest model, because professionally tested, we find 3 thicker jaw can't enter new model vehicle belt pulley, and we design 3 thin jaw to fit the new model. So this update version tool fit many vehicle model, includ newest model
- Application: GM 5.7L V8; GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8;Cadillac 4.5L, 4.6L, and 4.9L V8; compatible with Chevrolet trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4; compatible with Ford (1995-) V8 engine; Mitsubishi Eclipse (1995 - ) 2.0L DOHC non-turbo
- Function: Designed for removing damper pulleys in tight engine compartments without removing the radiator. This pulley is hard to access and remove dute to space limitations in and around the engine compartment
- Quality Guarante: Our harmonic damper pulley tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life, and we offer 12 month warranty
- Tips: if you try the 3-jaw puller is not fit you car, you need replace another 3 jaw
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #5
Fuel Tank Lock Ring Tool Fuel Pump Senders Removal Install Tools Compatible with Ford Chrysler Dodge Chevy Replacement for BMW Benz Volvo Jeep Equivalent OEM 6599
Asin: B07G8YJXGL | Model: HTL1004 | PartNumber: HTL1004 | Ean: 0724873168833 | UPC: 724873168833
Strong: This Fuel Pump Lock Ring Tool Made Of Hard Steel, Harder And More Stable Than A Hammer, And Enough Thickness No Sign Of Flexing Or Concern For Breakagewhen External Force Is Appliedshows. The Surface Is Coated With Black Oxide To Prevent Rust, So You Can Use A Long Time.
Lifetime Warranty: We Offer Lifetime Warranty, We Will Refund Or Replace, If The Fuel Tank Lock Ring Tool Have Any Quality Problem.
Save Effort: With The Helpe Of A 1/2" Drive Ratchet Or Breaker Bar, You Can Easy Remove Fuel Pump Lock Ring, Do Not Use Impact Tool.
So Easy: This Tools Easy To Use , You Dont Need A Hammer And Screwdriver To Remove The Fuel Pump Lock Ring.This Is By Far The Easiest And Safest Way To Remove A Fuel Pump Lock Ring. Would Have Saved You A Lot Of Grief And Time, Open The Ring Snapped On Faster Than It Took Me To Open The Box It Was Shipped In.
Features
- Applicable: Compatible with Benz W204 W207 W212; Compatible with Volvo T4 T5 engine, after 2010;Compatible with Ford F-150 trucks (2004-present); Compatible with Chrysler from 2004; compatible with Dodge mini-vans PT Cruiser Dakota Durango (2004-present); compatible with Chevy 1/2-ton and 3/4-ton trucks from 2004 ;Compatible with Hyundai Sante Fe 2007-2012 ; Compatible with Kia Sorento and sportage 2011 ; Compatible with Jeep Wrangler TJ Jeep Compass; compatible with BMW F01, F02, F10, F18
- So Easy: This tools easy to use , you dont need a hammer and screwdriver to remove the fuel pump lock ring.this is by far the easiest and safest way to remove a fuel pump lock ring. Would have saved you a lot of grief and time, open the ring snapped on faster than it took me to open the box it was shipped in
- Strong: This fuel pump lock ring tool made of hard steel, harder and more stable than a hammer, and enough thickness no sign of flexing or concern for breakagewhen external force is appliedshows. The surface is coated with black oxide to prevent rust, so you can use a long time
- Save Effort: with the helpe of a 1/2 drive ratchet or breaker bar, you can easy remove fuel pump lock ring, do not use impact tool
- Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the fuel tank lock ring tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 9.84 x 11.81 x 9.84 Inches | Weight: 1.00 Pounds
See On Amazon #6
Fuel Injector Puller Removal Set Injector Seal Installer Service Tool Kit Compatible with Audi VW 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI Petrol
Asin: B07GP3DXX4 | Model: HTQ1008B | PartNumber: HTQ1008B | Ean: 0732025172034, 0724873168598 | UPC: 732025172034, 724873168598
More Tools: Our Injector Puller Tool Set Include 18Pcs Tools, Complete Tool Kit To Help You Replace Injector Only One Time, And The Case Easy To Carry.
12 Months Warranty: We Offer 12 Months Warranty,We Will Refund Or Replace If The Tool Have Any Quality Problem.
Professional Injector Puller: This Designed Specifically For Vw Tsi Engine, Precisely Machined Ensure Accurate, Perfect Adaptat Vw Engine, Made Of Professional High-Strength Steel, High Hardness And Strong Toughness, Not Easy To Damage, Professional Quality Makes You More Assured.
Efficient Replace Injector Seals: This Injector Puller Set Easy To Pull Injectors, Help You To Reseal And Reinstall Fuel Injectors, Saved You A Lot Of Time And Frustration; Or If You Want Carbon Cleaning On A Vw Tsi, You Need This Injector Puller.
Features
- Applicable Engine: Injector puller tool set fit 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compitable with Seat Skoda, not fit diesel engines
- Efficient Replace Injector Seals: This Injector puller set easy to pull injectors, help you to reseal and reinstall fuel injectors, saved you a lot of time and frustration; or if you want carbon cleaning on a VW TSI, you need this injector puller
- More Tools: Our injector puller tool set include 18pcs tools, complete tool kit to help you replace injector only one time, and the case easy to carry
- Professional Injector Puller: This designed specifically for VW TSI engine, precisely machined ensure accurate, perfect adaptat VW engine, made of professional high-strength steel, high hardness and strong toughness, not easy to damage, professional quality makes you more assured
- 12 Months Warranty: We offer 12 months warranty,we will refund or replace if the tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 2.90 x 11.60 x 9.40 Inches
See On Amazon #7
DPTOOL Engine Timing Kit Compatible with Ford Mazda Camshaft Flywheel Locking Tools 1.4 1.6 1.8 2.0 Di/TDCi/TDDi ECOBOOST 1.6 Ti-VCT 1.5/1.6 VVT 2.3L 2.5L Cam Holding Tool 303-1097 303-1550 303-1556
Asin: B07GV63D7P | Model: HTF1010C | PartNumber: HTF1010C | Ean: 0732025173420 | UPC: 732025173420
Oem Equivalent Part Number: This Flywheel Locking Timing Tool Kit Have 18Pc Tools, Have Everything You Need For Timing, Replace Oem: 303-1097; 303-748; 303-1550; 303-1552; 303-1054; 303-1059; 303-735; 303-1552; 303-393A; 303-393-01; 303-393-02; 303-376B; 303-651; 303-193; 303-507; 303-734; 303-732; 303-Xtra.
Fitment Vehicle: 2011 Ford C-Max 1.6L Ecoboost, 1.6L Duratec-16V Ti-Vct;13 - 14 Ford Fusion 1.6L Ecoboost; 13 - 18 Ford Fusion 1.5L Ecoboost; 14 - 16 Ford Transit 1.6L Ecoboost; 03 - 05 Mazda Mp 3.0L; 04 - 06 Mazda Tribute 2.0L, 2.3L, 3.0L; 04- 09 Mazda 3, 2.0L 2.3L(Not Fit 2.3T); The Timing Tool Kit Compatible With Ford And Mazda Vehicles With A Wide Range Of Modern, There Are Many Models Have Not Been Written.
Compatible With Vehicle: For Focus (2004-2008); For Focus C-Max (2003-2008); For Mondeo (2007-2008) 1.6 Ti-Vct 16V (Hxda) Diese Engines; For Duratorq Fiesta / Courier (2000-2006); For Focus (1998-2006); For Focus C-Max (2003-2008); For Mondeo (2007-2008); For Tourneo Connect (2002-2008); For Transit Connect (2002-2008); For Fusion (2002-2008); For S-Max (2006-2008); For Galaxy (2006-2008); 012 Ford B-Max 1.4L Duratec-16V; 2015 Ford C-Max 1.5L Ecoboost.
Engine Code: 1.6 16V (Fyda / C, Fydb / D, Fyja, Fyjb, L1f, L1j, L1l, L1n, L1o, L1t, L1v, L1w, Hwda, Hwdb); 1.7 16V (Mha, Mhb); 1.8 16V (Eydb, Eydc, Eydd, Eyde, Eydj, Eydg, Eydi, Eydj, Eypa, Eypc, Rka, Rkb, Rkf, Rkh, Rkj, Rkk); 1.8 16V With Control Chain (Cdbb, Cgba / B, Chba / B, Csda, Csdb, Qqda, Qqdb, Qqdc); 2.0 16V (Edba / C, Edbb, Edbd, Eddb, Eddc, Eddd, Eddf, Nga, Ngb, Ngc, Ngd); 2.0 Rs / St170 (Alda, Hmda) 2.0 16V With Control Chain (Aoda, Aodb, Aowa, Cjba / B).
Features
- Applicable Engine: Compatible with FORD Duratec petrol engine 1.25, 1.4, 1.6, 1.7, 1.8, and 2.0 twin cam 16V, 2.3L, 2.5L engine; compatible FORD Duratorg diesel engine 1.4, 1.6, 1.8, 2.0 TDCI; compatible with FORD ECOBOOST 1.6 Ti-VCT, 1.5/1.6 VVT; compatible with MAZDA PSA 1.4, 1.6HDI,1.8L, 2.0L, 2.3L. engine code: 1.25 16V (DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB) ; 1.4 16V (ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA / C, FXDB / D, FXJA, FXJB)
- Engine Code: 1.6 16V (FYDA / C, FYDB / D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB); 1.7 16V (MHA, MHB); 1.8 16V (EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK); 1.8 16V with control chain (CDBB, CGBA / B, CHBA / B, CSDA, CSDB, QQDA, QQDB, QQDC); 2.0 16V (EDBA / C, EDBB, EDBD, EDDB, EDDC, EDDD, EDDF, NGA, NGB, NGC, NGD); 2.0 RS / ST170 (ALDA, HMDA) 2.0 16V with control chain (AODA, AODB, AOWA, CJBA / B)
- OEM Equivalent Part Number: This flywheel locking timing tool kit have 18pc tools, have everything you need for timing, replace OEM: 303-1097; 303-748; 303-1550; 303-1552; 303-1054; 303-1059; 303-735; 303-1552; 303-393A; 303-393-01; 303-393-02; 303-376B; 303-651; 303-193; 303-507; 303-734; 303-732; 303-xtra
- Compatible with Vehicle: for Focus (2004-2008); for Focus C-Max (2003-2008); for Mondeo (2007-2008) 1.6 Ti-VCT 16V (HXDA) Diese engines; for Duratorq Fiesta / Courier (2000-2006); for Focus (1998-2006); for Focus C-Max (2003-2008); for Mondeo (2007-2008); for Tourneo Connect (2002-2008); for Transit Connect (2002-2008); for Fusion (2002-2008); for S-Max (2006-2008); for Galaxy (2006-2008); 012 Ford B-Max 1.4L Duratec-16V; 2015 Ford C-Max 1.5L EcoBoost
- Fitment Vehicle: 2011 Ford C-Max 1.6L EcoBoost, 1.6L Duratec-16V Ti-VCT;13 - 14 Ford Fusion 1.6L EcoBoost; 13 - 18 Ford Fusion 1.5L EcoBoost; 14 - 16 Ford Transit 1.6L EcoBoost; 03 - 05 Mazda MP 3.0L; 04 - 06 Mazda Tribute 2.0L, 2.3L, 3.0L; 04- 09 Mazda 3, 2.0L 2.3L(not fit 2.3T); the timing tool kit compatible with Ford and Mazda vehicles with a wide range of modern, there are many models have not been written
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.15 x 9.84 x 9.84 inches
See On Amazon #8
14mm Magnetic Thin Walled Spark Plug Socket Universal Joint 3/8-Inch Drive 12 point Swivel Socket Removal Tool 12pt 96L (14mm) Compatible with BMW NISSAN
Asin: B07V5TQD2P | Ean: 0053742462551 | UPC: 053742462551
Super Thin Wall: We Use Advanced 12-Point Design,Standard Is 6-Point, So Our Update Version Products Thinner Than Standard Spark Plug Sockets, And It Fits Perfect And Good Compatibility.
Lifetime Warranty: We Offer Lifetime Warranty, We Will Refund Or Replace, If The Product Have Any Quality Problem.
Quality Guarante: This 3/8-Inch Drive 16Mm Thin Wall Magnetic Swivel Spark Plug Socket Made Of High Quality Chrome Vanadium Steel, High Hardness And Not Easy To Damage When Rotating.
Profession Spark Plug Socket: The Swivel Head Could 360 Degree Swivel, Necessary Tool For A Spark Plug Change, And The Only Way To Get Spark Plugs Out On Some Car Model.
Features
- Easy To Change Spark Plugs: This magnetic spark plug socket both of end have plenty strong magnet, swivel head could hold on ratchet firmly fixed, the top could attract spark plugs, not easy to loose the plug when installing/removing, more easy and efficient
- Profession Spark Plug Socket: The swivel head could 360 degree swivel, necessary tool for a spark plug change, and the only way to get spark plugs out on some car model
- Super Thin Wall: We use advanced 12-point design,standard is 6-point, so our update version products thinner than standard spark plug sockets, and it fits perfect and good compatibility
- Quality Guarante: This 3/8-inch drive 16mm thin wall magnetic swivel spark plug socket made of high quality chrome vanadium steel, high hardness and not easy to damage when rotating
- Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the product have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.74 x 0.39 x 0.39 Inches
See On Amazon #9
DPTOOL Fuel Injector Install & Remove Tool For BMW N20 N55 Automotive Engine Timing Tool Kit Fuel Injector Removal Installation Tool
Asin: B088R453TN | Model: HTZ201805 | PartNumber: HTZ201805
Tips: You Much Evenly Install The Tool First Before Installing Or Removing The Injectors.The Tool May Not Come Fully Tighten, So You Much First Make Sure You Tighten Everything First Before You Ue The Tool, If You Don't Know How To Use, It's Better To Search In Youtube, Because Wrong Operation Maybe Will Damage Your Car Engine Or Break Your High Pressure Fuel Injectors.
Lifetime Warranty: We Offer Lifetime Warranty, We Will Refund Or Replace, If The Fuel Injector Install Tool Have Any Quality Problem.
Oem Stanrded: Made Of High Quality Steel, High Hardness, Stable And Strong, Not Easy Broken, Our Quality Even Exceeds Oem, And Help You Save Much Money.
Function: Specially Designed To Install And Remove The Injector For N20 N55 Engine.
Features
- Application: Fuel injector install tool compatible with BMW N20, and new N55 engine, BM number: 130320, note: this injector not fit old N55 engine
- Function: Specially designed to install and remove the injector for N20 N55 engine
- Tips: you much evenly install the tool first before installing or removing the injectors.The tool may not come fully tighten, so you much first make sure you tighten everything first before you ue the tool, if you don't know how to use, it's better to search in youtube, because wrong operation maybe will damage your car engine or break your high pressure fuel injectors
- OEM Stanrded: Made of high quality steel, high hardness, stable and strong, not easy broken, our quality even exceeds OEM, and help you save much money
- Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the fuel injector install tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 1.60 x 7.70 x 5.30 Inches
See On Amazon #10
Dual Clutch Transmission Clutch Motor Electromechanical Unit Unlock Tool Actuator Reset Tool Compatible with Ford DSG 6 Speed DPS6 6DCT250 Clutch 6mm 14 Spline Socket with 1/4" Drive
Asin: B0BJZV4BHR | Model: 1021 | PartNumber: 1021
Applicable Vehicle Include: Compatible With Ford Fiesta: 2011-2019; Compatible With Focus: 2012-2018; Compatible With Ford Transit Connect: 2019; Compatible With Ford B-Max: Since 2012 Ect.
Material: High Quality Steel.
Specifecation: 6Mm Size, 14 Teeth, With 1/4'' Drive.
Applicable: Compatible With Ford Dsg 6 Speed Dual Clutch Dps6 Transmission.
Features
- Function: use to unlock dry dual clutch transmission clutch motor electromechanical unit, insert the reset tool into the lever actuator hole, turn the tool anti-clockwise to set new clutch
- Applicable: compatible with Ford DSG 6 speed dual clutch DPS6 transmission
- Applicable Vehicle Include: compatible with Ford Fiesta: 2011-2019; compatible with Focus: 2012-2018; compatible with Ford Transit Connect: 2019; compatible with Ford B-MAX: since 2012 ect
- Specifecation: 6mm size, 14 teeth, with 1/4'' drive
- Material: High quality steel
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Warranty: 12 months warranty
See On Amazon #11
DPTOOL Camshaft Timing Tool Kit for Ford Land Rover Explorer Mustang Ranger Mercury Mountaineer Mazda 4.0L 4015CC SOHC V6 8 Pieces
Asin: B07RPSLK3V | Model: HTJ1009 | PartNumber: HTJ1009 | Ean: 0053742462285 | UPC: 053742462285
Accurate: All The Tools Through Rigorous Engine Testing To Ensure High-Precision Matching, High-Precision Machine Processing, Each Thread And Size Must Be Accurate To Millimeters Level, So You Don't Worry Our Timing Tools Can't Fit 4.0L 4015Cc Sohc 12V V6 Engine.
Lifetime Warranty: We Offer Lifetime Warranty, We Will Refund Or Replace, If The 4.0 Timing Tool Kit Have Any Quality Problem , Or You Can Contact Us, We Will Serve You Wholeheartedly.
Quality Guarante: The Material Is Heavy Duty Steel, High Hardness To Ensure Tools Strong, Black Anti-Oxidation Coating On The Exterior, So Have A Long Service Life, Strict Quality Inspection Procedures Make You More Assured Of Buying.
Oem Fit: Engines Timing Tool Professionally Designed For 4.0L 4015Cc Sohc 12V V6 Engine, While This Is Not Oem, It Worked As Well As The Oem Tool, You Can Direct Replacement It, And Help You Save Much Money.
Features
- Fitment Engine: This timing tool kit fit 4.0L 4015CC SOHC 12V V6 engine, for 2004-2010 Ford Explorer; for 2004-2010 Ford Ranger; for 2004-2010 Ford Mustang; for 2004-2010 Ford Land Rover;for 2004-2010 Ford L3; for 2004-2010 Ford Mountainner
- OEM Fit: Engines timing tool professionally designed for 4.0L 4015CC SOHC 12V V6 engine, While this is not OEM, It worked as well as the OEM tool, you can direct replacement it, and help you save much money
- Accurate: All the tools through rigorous engine testing to ensure high-precision matching, high-precision machine processing, each thread and size must be accurate to millimeters level, so you don't worry our timing tools can't fit 4.0L 4015CC SOHC 12V V6 engine
- Quality Guarante: The material is heavy duty steel, high hardness to ensure tools strong, black anti-oxidation coating on the exterior, so have a long service life, strict quality inspection procedures make you more assured of buying
- Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the 4.0 timing tool kit have any quality problem , or you can contact us, we will serve you wholeheartedly
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 5.91 x 9.84 x 9.84 Inches | Weight: 8.82 pounds
See On Amazon #12
DPTOOL Strong Magnetic Oil Drain Plug Remover Tool Wrench Anti Scald Magnetic Sump Plug Removal Pick Up Tool 13 inches
Asin: B07RW9HL51 | Ean: 0053742462308 | UPC: 053742462308
Keep Your Hand Stay No Oil: The Magnetic Sump Plug Removal Tool Keeps Your Hand Out Of The Oil Stream, Spare Your Hands, Keep Your Hand Clean.
Lifetime Warranty: We Offer Lifetime Warranty, We Will Refund Or Replace, If The Product Have Any Quality Problem , Or You Can Contact Us, We Will Serve You Wholeheartedly.
Strong Magnetic: The Magnetic Pick Up Tool Top Have Strong Magnetism, They Can Easy Remove Oil Drain Plug, The Tool 13 Inches Length, Which Could Enter The Places Hand Hard-To-Reach, Easy To Use And Release Your Hands.
Change Oil More Easy: Magnetic Drain Plug Remover Tool To Remove Your Oil Drain Plug Bolt Quickly And Securely.Simply Loosen The Plug With Your Wrench, Then Attach The Powerful Magnet To The Drain Plug And Turn The Tool To Remove The Plug,The Oil Can Be Changed Easily Even Without Gloves.
Features
- Not Burn Hand When Changing Oil: This Magnetic oil plug remover tool has a flexible shaft for reaching remote drain plugs, the edges at the tip of the magnet do catch drain plugs to unscrew it from the vehicle, which avoid hot oil on yourself
- Change Oil More Easy: Magnetic Drain Plug Remover Tool to remove your oil drain plug bolt quickly and securely.Simply loosen the plug with your wrench, then attach the powerful magnet to the drain plug and turn the tool to remove the plug,the oil can be changed easily even without gloves
- Keep Your Hand Stay No Oil: The magnetic sump plug removal tool keeps your hand out of the oil stream, spare your hands, keep your hand clean
- Strong Magnetic: The magnetic pick up tool top have strong magnetism, they can easy remove oil drain plug, the tool 13 inches length, which could enter the places hand hard-to-reach, easy to use and release your hands
- Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the product have any quality problem , or you can contact us, we will serve you wholeheartedly
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.94 x 15.75 x 11.81 Inches | Weight: 0.22 pounds
See On Amazon #13
DPTOOL 32mm Automotive Fan Clutch Nut Wrench & Water Pump Holder Tool for BMW
Asin: B07GFFC3HG | Model: HTA1028 | PartNumber: HTA1028 | Ean: 0724873169953 | UPC: 724873169953
Accurate: This Timing Tool Set Designed Specifically For Bmw, High Precision And Pass Rigorous Engine Test.
Lifetime Warranty: We Offer Lifetime Warranty, If The Fan Clutch Wrench Have Any Quality Issues, We Will Replace Or Refund.
Heavy And Durable: Constructed From Premium High Strength Steel, This Fan Clutch Wrench Set Is Built To Last A Lifetime.
Fit: Compatible With, But Not Limited To The Following Applications: M4, M10, M20, M30, M40, M44, M50, M52, M52tu, M54, M56, M60, M70, M73, S14, S38, S54, S50b30, S50b32.
Features
- Easy: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan
- Fit: Compatible with, but not limited to the following applications: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32
- Accurate: This timing tool set designed specifically for BMW, high precision and pass rigorous engine test
- Heavy and Durable: Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime
- Lifetime Warranty: we offer lifetime warranty, if the fan clutch wrench have any quality issues, we will replace or refund
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.94 x 11.81 x 7.87 Inches
See On Amazon #14
DPTOOL Water Pump Sprocket Retainer Holding Tool Compatible with GM Ecotec 2.2 2.4 Replacement for Chevrolet Oldsmobile Pontiac Saab Saturn Platforms Cobalt
Asin: B07X8LY87T | Model: HT05781 | PartNumber: HT05781 | Ean: 0053742462872 | UPC: 053742462872
Must Have Tool For Replace Water Pump: Had To Have This Tool If You Need To Change Your Water Pump, And Didn’T Have Any Trouble. Because When You Change The Water Pump, This Water Pump Holder Tool Held The Sprocket In Place Perfectly, And Zero Problems.
Quality Guarante: Our 2.2L 2.4L Ecotec Water Pump Holder Tool Made Ofhigher Carbon Steel, High Hardness, Not Easy To Break, The Exterior Is Coated With Black Antioxidant Layer, Extended Service Life, And We Offer Lifetime Warranty.
Easy To Use: No Issues Of Losing The Timing Gear Bolts When Removing Them From The Water Pump, A Real Time Saver And Very Helpful To Finishing The Water Pump Replacement On Gm Ecotec 2.2 And Also 2.4 Engines, Save Much Time.
Safe Not Dropping Bolts: This Water Pump Holder Tool Is Superior To The Half-Round Models And Superior To The Units With Integrated Holding Pins. Because The Half Round Tools You Still Run The Risk Of Dropping Two Of The Bolts In To The Timing Cover, But This Tool Works Well To Keep Every Thing In Place And Keep Parts From Falling Into The Timing Chain Cover.
Features
- Application: This water pump holder tool fit GM 2.2L 2.4L Ecotec engine, Compatible with Chevrolet/ Oldsmobile /Pontiac/Saab and Saturn Platforms, Service range 2002 to current
- Safe Not Dropping Bolts: This water pump holder tool is superior to the half-round models and superior to the units with integrated holding pins. because the half round tools you still run the risk of dropping two of the bolts in to the timing cover, but this tool works well to keep every thing in place and keep parts from falling into the timing chain cover
- Must Have Tool for Replace Water Pump: Had to have this tool if you need to change your water pump, and didn t have any trouble. because when you change the water pump, this water pump holder tool held the sprocket in place perfectly, and zero problems
- Easy To Use: No issues of losing the timing gear bolts when removing them from the water pump, a real time saver and very helpful to finishing the water pump replacement on GM ecotec 2.2 and also 2.4 engines, save much time
- Quality Guarante: Our 2.2L 2.4L Ecotec water pump holder tool made ofhigher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life, and we offer lifetime warranty
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.94 x 9.84 x 7.09 Inches
See On Amazon #15
DPTOOL Camshaft Holding Tool Timing Alignment Holder Tool Kit Compatible with Ford Lincoln Mercury 3.5L 3.7L 4V Engines Replace 303-1248 303-1530 OTC 6682 with RT11 Removal Socket and Portable Case
Asin: B0C1B741YJ | Model: HFORD1248 | PartNumber: HFORD1248
Sturdy And Durable: Made Of High Standard Structural Steel And Coated With Black Oxide Finish, It Is Excellent Solid With Great Durability. Plus, It Has Good Performance On Rust And Crack Resistance To Long-Lasting Service Your Engine.
Package Includes: Includes 2 X Camshaft Holding Tool, 1 X Tension Tool, 1 X Rt11 Cr-Mo Tool Of Removing Camshaft Screw And Portable Case. We Offer Lifetime Warranty, We Will Refund Or Replace, If The Product Have Any Quality Problem.
Professional Timing Tool: This Camshaft Timing Alignment Holder Tool Work Great Holding The Cams To Do A Water Pump. Easy To Used And Holds Great.Use This Tool To Accurately Position And Align Hold Your 3.5L & 3.7L Camshaft At Tdc To Perform Service.
Exact Match: This Camshaft Holding Tool Timing Tool Set Designed Specifically For Ford V6 3.5L & 3.7L Cyclone Engines, High Precision And Great Compatibility , And Through Rigorous Engine Testing, While Is Not A Genuine Original, It Is A Direct Replacement And Completely Fit, Better Than Spending $300 For A Car Factory Brand Tool.
Features
- Applicable Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682
- Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool
- Sturdy and Durable: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine
- Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service
- Package Includes: Includes 2 x Camshaft Holding Tool, 1 x Tension Tool, 1 x RT11 Cr-MO Tool of Removing Camshaft Screw and Portable Case. We offer lifetime warranty, we will refund or replace, if the product have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Warranty: 12 months warranty
See On Amazon #16
DPTOOL EA888 1.8 2.0 TSi TFSi Camshaft Crankshaft Engine Timing Tool Compatible with Audi VW 2006-2018 Replace T10352 T10368 T40196 T10354 T10060A T40011 T40098 T40267 T40271 (Upgrades Version)
Asin: B08T93SB8S
Oem Equivalent Part Number: T10352; T10368; T40196; T10354; T10060a; T40011; T40098; T40267; T40271.
12 Months Warranty: We Offer 12 Months Warranty, We Will Refund Or Replace, If The Ea888 1.8 2.0 Timing Tool Have Any Quality Problem.
For Vehicle: Replacement For Volkswagen 2006-2018 Ea888 1.8 2.0 Tsi Tfsi Engine Vehicle Model, Compatible With Audi A3 A4 A5 A6 Q5 Tt/ Tt Quattro 2.0T; Vw Beetle, Eos, Gti, Jetta, Passat B6, Tiguan, Cc, Skoda, Seat, Magotan 2.0T.
Engine Code Include: Byt, Bzb, Caba, Cabb, Cabd, Cada, Caea, Caeb, Cawa, Cawb, Cbfa, Ccta, Ccza, Cczb, Cczc, Cdaa, Cdab, Cdha, Cdhb, Cdnb, Cdnc, Cdnd, Cesa, Ceta, Cfka, Cgya, Cjeb, Cjba, Cjsb Ect.
Features
- Application Engine: This timing tool is ea888 upgraded version, old version only fit ea888 2006-2013, this new timing tool fit 2006-2018, compatible with VAG series TSI TFSI EA888 1.8 2.0 engine
- Engine Code Include: BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB ect
- OEM Equivalent Part Number: T10352; T10368; T40196; T10354; T10060A; T40011; T40098; T40267; T40271
- For Vehicle: Replacement for Volkswagen 2006-2018 EA888 1.8 2.0 TSi TFSi engine vehicle model, Compatible with Audi A3 A4 A5 A6 Q5 TT/ TT Quattro 2.0T; VW Beetle, EOS, GTI, Jetta, Passat B6, Tiguan, CC, Skoda, SEAT, Magotan 2.0T
- 12 Months Warranty: We offer 12 months warranty, we will refund or replace, if the ea888 1.8 2.0 timing tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #17
Fuel Pump Lock Ring Removal and Reinstall Tool Adjustable Fuel Lid Tank Cover Collar Ring Spanner 5.2''-7.6''
Asin: B097GNYZMK
Not Damage Fuel Pump: Everybody Uses A Punch And A Hammer To Drive The Fuel Pump Locking Ring Off And On When Working On A Fuel Pump. The Ring Came Off Ok With That Method But Would Jump Out Of The Rail When Reinstalling. You Needn't Use A Punch And Hammer Bang Lock Ring Off Any More If Have This Tool.
Durable: This Tool Made Of High Quality Steel, Strong Ans Durable, Not Easy Break, And We Offer 12 Months Warranty, We Will Replace Or Refund It The Product Have Any Quality Problem.
Wide Applicable: This Tool Have 3 Arms Easy To Adjust , The Adjustable Diameter Range Is 5.2''-7.6'', So This Tool Fit Many Vehicle, But Please Carefully Check Your Car Locking Ring Diameter Before Order, If Not In 5.2''-7.6'' Diameter Range That Is Not Fit Your Car.
Work Great: This Tool Easy To Use, It Saved You Hours And A Lock Ring Trying To Use A Punch And Hammer Is Definitely Outdated ! Use This Tool To Remove And Reinstall Fuel Pump Lock Ring , It’Ll Make Life Easier!.
Features
- Easy To Remove Locking Ring: Use this tool and 1/2" breaker bar easy to remove fuel pump locking ring, and get the tank collar ring back to lock position
- Work Great: This tool easy to use, it saved you hours and a lock ring trying to use a punch and hammer is definitely outdated ! use this tool to remove and reinstall fuel pump lock ring , It ll make life easier!
- Not Damage Fuel Pump: everybody uses a punch and a hammer to drive the fuel pump locking ring off and on when working on a fuel pump. The ring came off ok with that method but would jump out of the rail when reinstalling. You needn't use a punch and hammer bang lock ring off any more if have this tool
- Wide Applicable: This tool have 3 arms easy to adjust , the adjustable diameter range is 5.2''-7.6'', so this tool fit many vehicle, but please carefully check your car locking ring diameter before order, if not in 5.2''-7.6'' diameter range that is not fit your car
- Durable: This tool made of high quality steel, strong ans durable, not easy break, and we offer 12 months warranty, we will replace or refund it the product have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Dimensions: 2.76 x 7.87 x 3.74 Inches | Weight: 1.15 Pounds
See On Amazon #18
DPTOOL 22 Piece Bolt Nut Extractor Set, 1/2" and 3/8" Drive Impact Lug Nut Remover Socket Tool, Wheel Lock Removal Kit for Extracting Damaged, Stripped Frozen Nuts & Screws Twist Socket Set
Asin: B0CDPQF8LW | Model: HNUTRE01 | PartNumber: HNUTRE01
Sturdy And Durable: The Bolt Nut Remover Is Made Of High Quality Chrome Molybdenum Steel, Which Is Hardened, Coated With A Layer Of Black Oxidizer And Heat-Treated To Be Resistant To Corrosion, Will Effectively Extend The Service Life.
A Complete Kit: This Wheel Lock Lug Nut Removal Tool Is A Complete Set That Includes Both 1/2" And 3/8" Square Drive Sockets And 2 Different Solid Iron Bars. 3/8" Square Drive Sockets Includes 1/4'', 8Mm, 9Mm, 10Mm, 11Mm, 12Mm, 13Mm. 1/2" Square Drive Sockets Includes 14Mm, 15Mm, 16Mm, 17Mm, 18Mm, 19Mm, 21Mm, 22Mm, 23Mm, 24Mm, 31/32'', 26Mm, 27Mm. They Cover The Most Commonly Used And Needed Metric And Standard Sockets. Whether It's Car Repair, Home Decoration, Or Process Production, It Can Provide You With Great Convenience.
Easy To Use And Storeage: Each Nut Is Engraved With Imperial Dimensions So You Can Easily Identify And Select The Most Appropriate Size, Then Use A Hammer To Tap The Removal Tool Into The Damaged Nut, Then Select A 1/2-Inch Or 3/8-Inch Square-Head Wrench To Loosen The Nut Counterclockwise To Remove These Rusty Nuts. Plus, It Comes With A Case In Which All Tools Are Secured For Easy Portability And Storage.
Professional Bite Design: Designed With Internal Threads And Reverse Spiral Grooves, The Spiral Teeth Grip Tightly To Provide Maximum Grip; The More You Turn It, The Tighter The Socket Becomes, The Less It Slips Or Cracks Your Knuckles, And The Easier It Is To Remove.
Features
- Must Have Tool for Bolt Nut Repair: Used to remove stripped, damaged, frozen, rusted, rounded bolts, nuts and screws. Each impact grade extractor socket has been professionally designed to almost exceed OEM standards for solving bolt problems and making it an essential tool for removing bolts nuts
- Professional Bite Design: Designed with internal threads and reverse spiral grooves, the spiral teeth grip tightly to provide maximum grip; the more you turn it, the tighter the socket becomes, the less it slips or cracks your knuckles, and the easier it is to remove
- Sturdy and Durable: The bolt nut remover is made of high quality chrome molybdenum steel, which is hardened, coated with a layer of black oxidizer and heat-treated to be resistant to corrosion, will effectively extend the service life
- Easy to Use and Storeage: Each nut is engraved with imperial dimensions so you can easily identify and select the most appropriate size, then use a hammer to tap the removal tool into the damaged nut, then select a 1/2-inch or 3/8-inch square-head wrench to loosen the nut counterclockwise to remove these rusty nuts. Plus, it comes with a case in which all tools are secured for easy portability and storage
- A Complete Kit: This wheel lock lug nut removal tool is a complete set that includes both 1/2 and 3/8 square drive sockets and 2 different solid iron bars. 3/8 square drive sockets includes 1/4'', 8mm, 9mm, 10mm, 11mm, 12mm, 13mm. 1/2 square drive sockets includes 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 23mm, 24mm, 31/32'', 26mm, 27mm. They cover the most commonly used and needed metric and standard sockets. Whether it's car repair, home decoration, or process production, it can provide you with great convenience
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #19
DPTOOL Oil Pump Primer Tool for GM Chevy V6 V8 SBC 350 BBC 454 Small Big Block
Asin: B086KR2PY7
Featuring A Special Billet Aluminum Sleeve That Accurately Positions The Shaft And Keeps It From Wobbling..
Fits: Sb/Bb Chevy V8 & Chevy V6 Engines..
Thick Shaft Design With Triangle Shaped End For No Slippage. For Use With 3/8" Or 1/2" Chuck Hand Drill..
Fits All Small And Big Blocks Including Popular Sizes Of 327 350 355 383 388 400 406 427 434 454.
Features
- These oil pump primer lets you spin the oil pump with a drill motor and bring up the oil pressure and moving the oil to the top of the engine prior to starting the engine, preventing unnecessary wear or damage to rotating and valve train components.
- Fits all small and big blocks including popular sizes of 327 350 355 383 388 400 406 427 434 454
- Featuring a special billet aluminum sleeve that accurately positions the shaft and keeps it from wobbling.
- Thick shaft design with triangle shaped end for no slippage. For use with 3/8 or 1/2 chuck hand drill.
- Fits: SB/BB Chevy V8 & Chevy V6 Engines.
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen DP Auto Tools
See On Amazon #20
Engine Transmissions Oil Pan Separator RTV Sealant Remover Cutter Tool
Asin: B0922WZ6QM
Special Design: This Oil Pan Remover Tool Three Sides Are Very Thin Opening, Works Great At Cutting Rtv Sealant On Oil Pans. Fits Into Tighter Spots Than A Putty Knife Can. Tapered Design Which Make Hit The Tool Sideways Along The Pan It Would Be Breeze.
Lifetime Warranty: We Offer Lifetime Warranty, We Will Replace Or Refund, If The Oil Pan Separator Have Any Quality Problem.
Tips: The Handle Can Be Removable And There's A Ball Detent To Hold It In Place However Its Not A Tight Fit So Most Of Time Need Hold It By Hand To Get It Started.
No Damage: Use This Oil Pan Separator, You Needn't Using A Screwdriver Or Gasket Scraper To Cutting, Was Able To Get Almost All The Way Around Oil Pan Without Having To Remove Surrounding Components. It Keeps From Having To Pry Off Oil Pans And Possibly Bending Them. This Tool Didn't Damage The Oil Pan, So Can Reuse The Oil Pan Without Buying A New One.
Features
- Easy To Remove Oil Pan: This tool works great at cutting RTV sealant on oil pans. if you couldn t get the transmission pan off, a few taps of a hammer with this tool, the oil pan will came off with minimal effort, it's the perfect tool to remove transmission oil pan
- No Damage: Use this oil pan separator, you needn't using a screwdriver or gasket scraper to cutting, was able to get almost all the way around oil pan without having to remove surrounding components. It keeps from having to pry off oil pans and possibly bending them. this tool didn't damage the oil pan, so can reuse the oil pan without buying a new one
- Special Design: This oil pan remover tool three sides are very thin opening, works great at cutting RTV sealant on oil pans. Fits into tighter spots than a putty knife can. tapered design which make hit the tool sideways along the pan it would be breeze
- Tips: the handle can be removable and there's a ball detent to hold it in place however its not a tight fit so most of time need hold it by hand to get it started
- Lifetime Warranty: We offer lifetime warranty, we will replace or refund, if the oil pan separator have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #21
DPTOOL Engine Camshaft Timing Lock Tool Set for Jaguar/Land Rover Evoque 2.0T /Ford 2.0 SCTi Ecoboost Ti-VCT Mondeo Focus 303-1565 303-1600 303-748 303-1594 303-1595 303-1521 303-1504
Asin: B07D7VDSZH | Model: HTF1003C | PartNumber: HTF1003C | Ean: 0716294386637 | UPC: 716294386637
Professional Timing Tool : Dptool Tool Is Used To Lock The Camshaft Of Ford Petrol Injection Engines, Using Professional Steel, And Built By Professional Engineers, Timing Tool, Dptool More Profession.
Quality Guarante : Our Camshaft Timing Tool Made Of High Quality Steel, High Hardness, Not Easy To Break, The Exterior Is Coated With Black Antioxidant Layer, Extended Service Life.
Accurate : All Tools Have Undergone Rigorous Engine Testing, To Ensure That The Timing Tool Can Be Perfectly Adapted To The Engine, As Same As The Oem, Oem Equivalent Part Number: 303-1565; 303-1600; 303-748; 303-1594; 303-1595; 303-1521; 303-1504.
Applicable Vehicle : The Timing Tool Kit For Focus (2011.2), For Galaxy (2006.5) , For Mondeo (2007.5), For S-Max(2006.5).
Features
- Applicable Engine: This camshaft timing tool compatible with Ford Mondeo 2.0T Engine, 2.0L Duratec-HE (MI4) Petrol, 2.0L EcoBoost GTDI (MI4) Petrol, 2.0L ST EcoBoost GTDI - (MI4) Petrol, Engine codes TNWA/TNWB/TNBA/TPWA/MGDA/XQDA
- Applicable Vehicle : The timing tool kit for Focus (2011.2), for Galaxy (2006.5) , for Mondeo (2007.5), for S-MAX(2006.5)
- Professional Timing Tool : DPTOOL tool is used to lock the camshaft of Ford petrol injection engines, using professional steel, and built by professional engineers, timing tool, DPTOOL more profession
- Accurate : All tools have undergone rigorous engine testing, to ensure that the timing tool can be perfectly adapted to the engine, as same as the OEM, OEM Equivalent Part Number: 303-1565; 303-1600; 303-748; 303-1594; 303-1595; 303-1521; 303-1504
- Quality Guarante : Our camshaft timing tool made of high quality steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 2.30 x 10.30 x 5.80 Inches | Weight: 5.00 pounds
See On Amazon #22
8pcs Engine Camshaft Alignment Timing Tool Kit For Chevrolet Cruze Aveo Orlando Vauxhall Opel Astra Corsa Insignia Mervia Vectra Zafira Alfa Romeo Fiat 16V 1.4 1.6 1.8 with 41mm Water Pump Wrench
Asin: B07G996SJL | Model: HTG1001C | PartNumber: HTG1001C | Ean: 0724873168963 | UPC: 724873168963
Camshaft Alignment: This Is A Must If You Are Doing The Timing Belt As The Pulleys Free Spin And You Will Not Be Able To Keep Proper Timing Without This Or Well It Would Be A Pita To Do It Without This, So This Kit Let Change Belt More Easy.
Lifetime Warranty: All The Timing Tools Through Rigorous Engine Testing To Ensure High-Precision Matching, Made Of High Quality Steel, High Hardness, Stable And Strong, Not Easy Broken. Came With Instructions So You Don’T Get Confused. We Offer Lifetime Warranty, We Will Refund Or Replace, If The Cam Timing Tool Have Any Quality Problem.
More Professional: Compared With Other Tools, We Have Added 41Mm Water Pump Wrench. Easily Adjust And Hold The Water Pump When Replacing Or Adjusting The Timing Belt Stubby Tool Design Allows Access To Timing Belt Sprocket Without Interference From Vehicle Frame, But This Water Pump Wrench Only Fit 1.6L Engines Chevrolet Aveo 2004-Current, And Need Use With 3/8 Inch Square Drive And Short Extension.
Fit Engine Code: 1.4 16V: G14d; 1.6: A16lel, A16ler, A16let, A16xer, Lde/A16ler, Lde/A16xer, Llu/A16let, Z16lel, Z16ler, Z16let, Z16xe1, Z16xep, Z16xer; 1.6 Ecoflex Cng: A16xnt, Lge/A16xnt, Z16xnt; 1.8: 2Ho/A18xel, 2Ho/A18xer, A18xer, Z18xer, 939A4.000.
Features
- Applicable Engine: This timing tool compatible with GM belt driven engine 16V 1.6 1.8 Z and A , fit Vauxhall Opel: Astra-G-C/Corsa-D/Insignia/Mervia/Vectra-C/Zafira-B 1.6 1.8L engine; fit Chevrolet: Cruze /Aveo/Orlando 1.4 1.6 1.8 L engine; fit Alfa Romeo 159; fit Fiat Croma 1.8L
- Fit Engine Code: 1.4 16V: G14D; 1.6: A16LEL, A16LER, A16LET, A16XER, LDE/A16LER, LDE/A16XER, LLU/A16LET, Z16LEL, Z16LER, Z16LET, Z16XE1, Z16XEP, Z16XER; 1.6 ECOFLEX CNG: A16XNT, LGE/A16XNT, Z16XNT; 1.8: 2HO/A18XEL, 2HO/A18XER, A18XER, Z18XER, 939A4.000
- Camshaft Alignment: This is a must if you are doing the timing belt as the pulleys free spin and you will not be able to keep proper timing without this or well it would be a pita to do it without this, so this kit let change belt more easy
- More Professional: Compared with other tools, we have added 41mm water pump wrench. Easily adjust and hold the water pump when replacing or adjusting the timing belt Stubby tool design allows access to timing belt sprocket without interference from vehicle frame, but this water pump wrench only fit 1.6L engines Chevrolet Aveo 2004-current, and need use with 3/8 inch square drive and short extension
- Lifetime Warranty: All the timing tools through rigorous engine testing to ensure high-precision matching, made of high quality steel, high hardness, stable and strong, not easy broken. Came with instructions so you don t get confused. We offer lifetime warranty, we will refund or replace, if the cam timing tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.94 x 15.75 x 11.81 Inches
See On Amazon #23
Double Clutch Dry DPS6 Transmission Installer Remover Tool Compatible with Ford Volvo Focus Replace FM Number: 307675
Asin: B07XG3RGCJ | Model: walnut sand carbon deposit cleaner | PartNumber: walnut sand carbon deposit cleaner | Ean: 0053742462902 | UPC: 053742462902
Professional Tool: Special Designed To Disassembly Dry Transmission And Align The Twin-Clutchto Change The Oil Seal
, Our Tool Designed And Manufactured By Professional Engineers, Which Let You Choose No Worry.
Instruction: Install The Special Tool And Compress The Input Shaft. Turn The Threaded Bar 20 Turns After It Makes Contact With The Input Shaft.
Material: The Twin Clutch Dry Transmission Installer &Remover Tools' Material Is Heavy Duty Steel, Anti-Corrosion And Hardness, So Have A Long Service Life.
As Accurate As Oem: All The Tools Have Been Engine Tested And Strict Quality Inspection, To Ensure Compatibility With The Engine, Even Some Our Designs Are Better And Last Longer Than Those Of The Original Manufacturers.
Features
- Fit: compatible with VOLVO, compatible with FORD, transmission DPS6,replace FM number: 307675. While is not a original, it is a direct replacement and completely fit, and our offer quality guarantee, which will help you save much money
- As Accurate As OEM: All the tools have been engine tested and strict quality inspection, to ensure compatibility with the engine, even some our designs are better and last longer than those of the original manufacturers
- Professional Tool: Special designed to disassembly dry transmission and align the twin-clutchto change the oil seal , our tool designed and manufactured by professional engineers, which let you choose no worry
- Material: The twin clutch dry transmission installer &remover tools' material is heavy duty steel, anti-corrosion and hardness, so have a long service life
- Instruction: Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 11.81 x 23.62 x 19.69 inches
See On Amazon #24
Camshaft Holding Tool Cam Alignment Positioning Timing tool Compatible with Ford 4.6L Windsor V8 Econoline F-Series Truck 5.4L V8 Econoline Expedition Lincoln Navigator-r 6.8L V10 303-557 (Pack of 2)
Asin: B08V8T83WQ
Function: Holds The Cams Ensure Camshaft Alignment When Replace Timing Chain, And Easy To Install On The Cam.
12 Months Warranty: We Offer 12 Months Warranty, We Will Refund Or Replace, If The Camshaft Hold Tool Have Any Quality Problem.
Oem Standard: Our Camshaft Holding Tool As Same As Oem, Accurate And Professinal Manufact, Material Is High Quality Steel, High Hardness And Strong, The Exterior Is Coated With Black Antioxidant Layer To Anti-Rust , Would Hold Up For Years Of Use.
Oem Equivalent Part Number: 6477, 303-557, T96t-6256-B.
Features
- Application: Compatible with Ford 1997 - 2002 4.6L Windsor V8 Econoline and F-Series Truck;1997 - 2002 5.4L V8 Econoline Expedition and F-Series Truck; 1997 - 2002 6.8L V10 Econoline and 1998 - 2002 5.4L V8 Lincoln Navigator-r
- OEM Equivalent Part Number: 6477, 303-557, T96T-6256-B
- Function: Holds the cams ensure camshaft alignment when replace timing chain, and easy to install on the cam
- OEM Standard: Our Camshaft holding tool as same as OEM, accurate and professinal manufact, material is high quality steel, high hardness and strong, the exterior is coated with black antioxidant layer to anti-rust , would hold up for years of use
- 12 Months Warranty: We offer 12 months warranty, we will refund or replace, if the camshaft hold tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #25
DPTOOL Fuel Injector Noid Light Test Kit Noid Lites IAC Tester Compatible with GM PFI/TBI/SCPI/Multec2 Replacement for Ford TBI Compatible with Bosch2/PFI with Extension
Asin: B09N79GY8J
Come With Iac Tester And Extension: It Has Lights That Cover Just About Everything Out There. The Iac Testers Are A Great Addition. And The Extension Is Amazing. It's Extremely Easy To Hook This All Up, Sit In The Drivers Seat And Watch The End Of The Extension While Cranking The Engine Over.
Wide Applicable Vehicle: Comes With All Sorts Of Different Terminal Configurations To Match A Wide Variety Of Plugs Out There, So Work With Most Vehicle You Will Encounter.
Package Include: This Kit Include 8Pc Noid Light: Compatible With Gm Pfi, Compatible With Gm Tbi, Compatible With Gm Scpi, Compatible With Gm Multec2, Compatible With Ford Tbi, Compatible With Geo Tbi, Compatible With Bosh Pfi, With Iac Tester And Extension.
Simple Way To Check Injector Pulse: This Kit Takes All The Guesswork Out Of Diagnosing Performance Issues, The Noid Lites Confirm The Injectors Are Getting The Signal To Open And Close, Easy To Use, Crank The Engine And Test For A Signal, Noid Light Flashes Means Injector Pulse Normal.
Features
- Fuel Injection Troubleshooting: This kit provides a simple, easy way to tell if your injectors are receiving a signal from the ECU/PCM/PMU/AARP/NATO/NASA to spray.Plug these into the connectors for your injectors, idle air control, etc., to rule out any electrical issues, which will save you time
- Simple Way To Check Injector Pulse: This kit takes all the guesswork out of diagnosing performance issues, the Noid lites confirm the injectors are getting the signal to open and close, easy to use, crank the engine and test for a signal, noid light flashes means injector pulse normal
- Come With IAC Tester and Extension: It has lights that cover just about everything out there. The IAC testers are a great addition. and the extension is amazing. It's extremely easy to hook this all up, sit in the drivers seat and watch the end of the extension while cranking the engine over
- Package Include: this kit include 8pc noid light: compatible with GM PFI, compatible with GM TBI, compatible with GM SCPI, compatible with GM Multec2, compatible with FORD TBI, compatible with Geo TBI, compatible with BOSH PFI, with IAC Tester and Extension
- Wide Applicable Vehicle: comes with all sorts of different terminal configurations to match a wide variety of plugs out there, so work with most vehicle you will encounter
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #26
DPTOOL 12pt 1/2" Dr L-Type Diesel Injector Line Socket Wrench Set 12 14 16 17 18 19mm (6PCS)
Asin: B082Y5B4WG | Model: DP-DIESEL-WRENCH | PartNumber: DP-DIESEL-WRENCH | Ean: 0053742463114 | UPC: 053742463114
Diesel Injector Fuel Line Socket Wrenches.
12Mm / 14Mm / 16Mm / 17Mm / 18Mm And 19Mm.
Suitable For Dismantling Injector Lines On Most Diesel Engines.
1/2" Drive So Will For Any 1/2" Drive Ratchets / Bars / Extension.
Features
- Practical Function: Special designed to loosen and tighten nuts and bolts in confined spaces such as fuel injector connections.
- 1/2 drive so will for any 1/2 drive ratchets / bars / extension
- Diesel injector fuel line socket wrenches
- Suitable for dismantling injector lines on most diesel engines
- 12mm / 14mm / 16mm / 17mm / 18mm and 19mm
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 5.91 x 9.84 x 9.84 Inches | Weight: 2.46 Pounds
See On Amazon #27
DPTOOL Engine Camshaft Alignment Timing Tool Kit for BMW Mini Copper N12 N14 1.4 1.6 Citroen Peugeot N16 Engines
Asin: B07GJT73ZB | Model: HTA1013 | PartNumber: HTA1013 | Ean: 0732025171280 | UPC: 732025171280
Content: Package Includes Camshaft Locking Tool – Inlet, Camshaft Locking Tool – Exhaust, Inlet Camshaft Locking Tool, Camshaft Alignment Clamp, Crankshaft Setting Pin, Chain Tensioner, M6 Setscrews (4), And Carrying Case.
Suitable Models: -One, Hb Cooper, Cooper, Cooper S, Series R55-56 With N12, N14 Engine. -Crankshaft Locking Tool Use As Oem 119590. -Camshaft Locking Tool Use As Oem 119540. -Chain Tensioner Used Use Oem 119340. -Bmw Mini One-Cooper/Cooper S. N12 1.4 & 1.6 Valvetronic & N14 1.6 Direct Injection. -Citroen C4 (08-09),C4 Picasso (08-09). -Peugeot 207 (06-09), 207Cc (07-09), 308 (01-09). -With Engine:1,4 Vti (Valvetronic) Ep3(8Fs) (Valvetronic) Ep6(5Fw), 1.6Thp (Di.
Applicaiton: -For Replacing The Cylinder Head Sealing And Motor Timing. -Suitable For Bmw , Mini, Citroen, Peugeot 1.4, 1.6 V16 Petrol . -For Setting Camshaft Timing On The N12, N14 Mini Cooper Engine..
Fitment: Models Years – Mini One Coupe R56 (2006-2010), Mini Cooper Coupe R56 (2006-2010), Mini Cooper Hb R55 (2007-2010), Citroen C4 (2008-2009), Citroen C4 Picasso (2008-2009), Peugeot 207 (2006-2010), Peugeot 207Cc (2007-2010), Peugeot 308 (2001-2010), Peugeot 3008 (2009-2012), Peugeot 5008 (2009-2012).
Features
- Practical: This Camshaft Alignment Timing Tool Kit works for vehicle models: Mini Cooper Mini One/ HB Cooper/ Cooper/ Cooper S, Citoen C4/ C4 Picasso, Peugeot 207/ 207CC/ 308 & Engine types: N12/N14 (1.4L / 1.6L VTI - Turbo), EP3(8FS), EP6(5FW), EP6C, 1.6THP, EP6DT(5FX), EP6DTS(5FY)
- Fitment: Models Years Mini One Coupe R56 (2006-2010), Mini Cooper Coupe R56 (2006-2010), Mini Cooper HB R55 (2007-2010), Citroen C4 (2008-2009), Citroen C4 Picasso (2008-2009), Peugeot 207 (2006-2010), Peugeot 207CC (2007-2010), Peugeot 308 (2001-2010), Peugeot 3008 (2009-2012), Peugeot 5008 (2009-2012)
- Content: Package includes camshaft locking tool inlet, camshaft locking tool exhaust, inlet camshaft locking tool, camshaft alignment clamp, crankshaft setting pin, chain tensioner, M6 setscrews (4), and carrying case
- Applicaiton: -For replacing the cylinder head sealing and motor timing. -Suitable for BMW , Mini, Citroen, Peugeot 1.4, 1.6 V16 petrol . -For setting camshaft timing on the N12, N14 Mini Cooper engine.
- Suitable models: -One, HB Cooper, Cooper, Cooper S, series R55-56 with N12, N14 engine. -Crankshaft locking tool use as OEM 119590. -Camshaft locking tool use as OEM 119540. -Chain tensioner used use OEM 119340. -BMW Mini One-Cooper/Cooper S. N12 1.4 & 1.6 Valvetronic & N14 1.6 Direct Injection. -Citroen C4 (08-09),C4 Picasso (08-09). -Peugeot 207 (06-09), 207CC (07-09), 308 (01-09). -With engine:1,4 VTi (Valvetronic) EP3(8FS) (Valvetronic) EP6(5FW), 1.6THP (Di
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DAPENG AUTO TOOLS CO.,LTD
Dimensions: 3.94 x 9.84 x 7.09 Inches
See On Amazon #28
DPTOOL Camshaft Actuator Locking Timing Tool Cam Phaser Retainer Water Pump Sprocket Retainer Holding Tool Compatible with GM/Buick/Chevrolet/GMC Ecotec 2.0 2.4 Engine Replace EN48953
Asin: B08T95HH8V
Function: Designed To Help Out In Torquing Cam To Pulley Bolts On The Gm Ecotec 2.0 2.4, This Kit Include Camshaft Actuator Locking Tool And Water Pump Sprocket Hold Tool, Water Pump Holder Tool Held The Sprocket In Place Perfectly When Replace Water Pump.
12 Months Warranty: We Offer 12 Months Warranty, We Will Refund Or Replace, If The Camshaft Actuator Locking Timing Tool Have Any Quality Problem.
Not Easy Bent: Our Cam Phaser Retainer Tool Made Of High Hardness Steel, Not Soft Steel, Not Alloy, Set The Camshaft Timing, The Tabs Not Easy Bent Fairly Easily While Removing The Camshaft Gear Bolts.
Fit Engine Code: 2.0 Lhu / A20nft;2.0 E85 Lhu / A20nft; 2.0 Sidi Turbo Ltg / A20nht; 2.0 Turbo Ldk / A20nht; 2.0 Turbo Lhu / A20nft; 2.4 A24xe (Le5); 2.4 Le5 / Le9; 2.4 Le9; 2.4 Le5.
Features
- Application: Fit GM 2.0 2.4 ECOTEC Engine, OEM Equivalent Part Number: EN 48953.compatible with OPEL :Astra J OPC (2012-); Insignia (2008-); Antara (2011-2012). Compatible with CHEVROLET : Malibu (2012-); Captiva (2011-); HHR (2008-2009). Compatible with SAAB 9-5.Compatible with Ecotec/2010 Buick LaCrosse, 2010 GMC Terrain, 2.0L, 2.4L ECOTEC engines
- Fit Engine Code: 2.0 LHU / A20NFT;2.0 E85 LHU / A20NFT; 2.0 SIDI Turbo LTG / A20NHT; 2.0 Turbo LDK / A20NHT; 2.0 Turbo LHU / A20NFT; 2.4 A24XE (LE5); 2.4 LE5 / LE9; 2.4 LE9; 2.4 LE5
- Function: Designed to help out in torquing cam to pulley bolts on the GM Ecotec 2.0 2.4, this kit include camshaft actuator locking tool and water pump sprocket hold tool, water pump holder tool held the sprocket in place perfectly when replace water pump
- Not Easy Bent: Our cam phaser retainer tool made of high hardness steel, not soft steel, not alloy, set the camshaft timing, the tabs not easy bent fairly easily while removing the camshaft gear bolts
- 12 Months Warranty: We offer 12 months warranty, we will refund or replace, if the camshaft actuator locking timing tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #29
Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments
Asin: B08XLMN1LM
Effient Slide Hammer: Our Slide And The Slide Hammer Follow Ergonomic Design, The Handle Is Curved And Have A Large Surface, Which Use More Comfortable. Use Our Cv Joint Slide Hammer, Work More Efficiently.
Combinnation Kit: This Kit Include: 1 Heavy Duty Slide Hammer; 1 Opening 63Mm Cv Joint Fork; 1 Opening 48Mm Cv Joint Fork; 1 Manual Puller; 2Pc 16Mm Nut. This Kit Have Everthing You Need To Remove Cv Axle Or Half Shaft, All The Tools Put In A Plastic Case, Easy To Carry, And We Offer 12 Months Warranty, We Will Refund Or Replace, If The Tool Have Any Quality Problem.
Wih 63Mm 48Mm Joint Fork: Our Kit Include Opening 63Mm And 48Mm Cv Joint Fork Removing Adapter, The Cv Joint Fork Is Be Threaded Internally, And The Slide Hammer Stick Is Threaded Externally. The Joint Fork Could Fit On The Slide Hammer Stick, 63Mm And 48Mm Fit Most Vehicle Models, Have Wide Use.
Heavy Duty: Our Slide Hammers Are Heavier And Larger Than Normal Ones, Easier To Use And Work More Better, Hammer Weight Is 10.5 Lb, Is Twice The Average Slide Hammer, So The Generated Pulling Force Is Also Twice Of A Normal Slide Hammer, Length Is 19.5 Inches, Have Sufficient Length Slide To Generate More Force, Slide Hammer And The Vc Join Fork Is Made Of Heavy Duty Steel, Durable And Not Easy To Break.
Features
- Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components
- Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break
- Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently
- Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use
- Combinnation Kit: This kit include: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry, and we offer 12 months warranty, we will refund or replace, if the tool have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
See On Amazon #30
Compatible with Audi Timing Chain Tool Kit Replacement for Audi VW 2.0, 2.4, 2.8, 3.0T, 3.2, 4.2, 5.2 Engine A4 A6 A6L A8 Q5 Q7 R8 303212 T40133 T40070 T40058 T10172 Alignment Camshaft Locking Tool
Asin: B07D8QW1TH | Model: HTD1056 | PartNumber: HTD1056 | Ean: 0716294387108 | UPC: 716294387108
Oem Equivalent Part Number: 303212,T10172,T40070,T40133,T40058,T40071,T10035,T40069,T3242,T10172-2.
12 Months Warranty: Made Of High Quality Steel, High Hardness And Very Strong, Not Easy To Break And Deform, The Exterior Is Coated With Antioxidant Layer To Prevent Rust, Extended Service Life, And We Offer 12 Months Warranty, We Will Replace Or Refund , If The Product Have Any Quality Problem.
Compalete Kit: A Complete Set For Alignment, Adjustment The Camshaft, Replacement The Timing Chain,And All The Tools Put In A Suitcase, Easy To Carry And Find, Will Improve Your Work Efficiency, And Wide Applicable Will Help You To Save Much Money.
Application: Compatible With Audi Vw Q5 2.0,A6l 2.8 3.0T; A6l/Quattro 2.4 With Engine Bdw; 6-Cyl Petrol Direct Injection 2.8L 4V Engine, Mechanics; Compatible With Audi Vw A4/A6/A8/Q7/R8 3.2 4.2 5.2 Fsi With Engine Auk.
Features
- Important Tips: As a honest seller, we must let our user know it, Because the surface treatment process is not very good in before, the product surface looks very dirty. but we have improved the process and strictly checked the quality. Now we have completely solved this problem. Now the surface of the product is not dirty, just like the picture shows, so please don't worry, we can guarantee that now you order product is good
- Application: Compatible with Audi VW Q5 2.0,A6L 2.8 3.0T; A6L/Quattro 2.4 with engine BDW; 6-cyl petrol direct injection 2.8L 4V engine, Mechanics; compatible with Audi VW A4/A6/A8/Q7/R8 3.2 4.2 5.2 FSi with engine AUK
- OEM Equivalent Part Number: 303212,T10172,T40070,T40133,T40058,T40071,T10035,T40069,T3242,T10172-2
- Compalete Kit: A complete set for alignment, adjustment the camshaft, replacement the timing chain,and all the tools put in a suitcase, easy to carry and find, will improve your work efficiency, and wide applicable will help you to save much money
- 12 Months Warranty: Made of high quality steel, high hardness and very strong, not easy to break and deform, The exterior is coated with antioxidant layer to prevent rust, extended service life, and we offer 12 months warranty, we will replace or refund , if the product have any quality problem
- See more on Amazon...
Brand: DPTOOL | Manufacturer: Shenzhen Dapeng Aoto Tools CO.,LTD
Dimensions: 3.94 x 11.81 x 11.81 inches
See On Amazon