DT-DIATOOL - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Diamond Tile Hole Saw Kit 10-Pack, DT-DIATOOL Diamond Core Drill Bits Set 6/6/8/19/35/51/65mm+20mm Diamond Finger Bit+50mm Diamond Chamfer Bit+SDS Adapter for Porcelain Ceramic Tile Marble Granite
Asin: B0CL92XN3Y | Ean: 0759039780703 | UPC: 759039780703
【Recommended Machine】5/8" Arbor Angle Grinder. Recommended Speed 6000Rpm; Maximum Speed 11000Rpm. Sds Adapter In This Kit Can Be Attached To A Drill Bit With A 5/8" Fitting So That The Drill Bit Can Be Attached To Your Drill Machine With Sds-Plus Thread. If You Are Using This Kit On A Hand Drill, Make Sure That The Drilling Speed Does Not Go Below 2000 Rpm. And Do Not Use The Impact Drill Mode..
【Save Time Tool】High Quality Diamond Make Drilling Less Chipping; Drill Bits, Chamfer Bit And Finger Bit Are Used Together For Faster Hole Shaping And A Clean Finish..
【Durable And Sturdy】Vacuum Brazed Technology Provides High Efficient Working Performance And Longer Service Life..
【Application】Core Drill Bits Are Used To Drilling Holes; Finger Bit For Enlarging Holes; Chamfer Bit For Trimming Holes; Dry Or Wet Use. For Porcelain Ceramic Tile Marble Granite, Etc..
Features
- Specification 7pcs core drill bits: Diameter 1/4"(6mm) 2pcs+5/16"(8mm)+3/4''(19mm)+1-3/8''(35mm)+2''(51mm)+2-1/2''(65mm); 1pc 4/5''(20mm) finger bit; 1pc 2''(50mm) beveling chamfer bit; 1pc sds-plus adapter.
- Application Core drill bits are used to drilling holes; finger bit for enlarging holes; chamfer bit for trimming holes; Dry or wet use. For porcelain ceramic tile marble granite, etc.
- Recommended Machine 5/8 arbor angle grinder. Recommended speed 6000RPM; Maximum speed 11000RPM. sds adapter in this kit can be attached to a drill bit with a 5/8 fitting so that the drill bit can be attached to your drill machine with sds-plus thread. If you are using this kit on a hand drill, make sure that the drilling speed does not go below 2000 RPM. and do not use the impact drill mode.
- Durable and Sturdy Vacuum Brazed technology provides high efficient working performance and longer service life.
- Save time tool High quality diamond make drilling less chipping; Drill bits, chamfer bit and finger bit are used together for faster hole shaping and a clean finish.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #2
DT-DIATOOL Diamond Grinding Wheel 4 Inch for Concrete Masonry Hard Stone Premium Sintered Diamond Turbo Segmented Turbo Row Cup Wheel
Asin: B09X9KX3QY | Ean: 0791180049728 | UPC: 791180049728
Lower Cost To Save Your Money..
#40/50 Diamond Grit, Sharper Than #30/40 Grinding Wheels And Simplify Your Work..
Recommended For Surface Grinding Or Finishing For Concrete, Masonsy And Construction Material..
Sintered Turbo-Row Design With 24 Diamond Segments Increases The Work Efficiency. 5Mm Thickness Strong Steel Body Can Bear Tough Work..
Features
- 4 Inch (Outside diameter 105mm). 22.23mm, 20mm and 16mm arbors can fit more machine.
- Sintered turbo-Row design with 24 diamond segments increases the work efficiency. 5mm thickness strong steel body can bear tough work.
- Lower cost to save your money.
- Recommended for surface grinding or finishing for concrete, masonsy and construction material.
- #40/50 diamond grit, sharper than #30/40 grinding wheels and simplify your work.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.59 x 4.13 x 4.13 Inches | Weight: 0.66 pounds
See On Amazon #3
DT-DIATOOL 2pcs Aluminum Backer Pad 4 Inch Hook and Loop Backing pad 5/8-11 Arbor
Asin: B07K3ZWKV4 | Model: DT751045/8-11x2 | PartNumber: DT751045/8-11x2 | Ean: 0734602261520 | UPC: 734602261520
Aluminum Alloy Body Can Withstand The Heavy Duty Work, Lighter Weight But Longer Service Life..
Please Use With Polishing Pads, This Product Is Only The Backer, The Polishing Pads Are Not Included..
Easy To Use, Sticky Hook Design For Ready Access..
Diameter 4 Inch(105Mm); Arbor 5/8"-11..
Features
- Package include 2pcs aluminum backer; For diamond polishing pads, sanding disc and some other velcro-backed grinding discs.
- Diameter 4 inch(105mm); Arbor 5/8-11.
- Aluminum alloy body can withstand the heavy duty work, lighter weight but longer service life.
- Easy to use, sticky hook design for ready access.
- Please use with polishing pads, this product is only the backer, the polishing pads are not included.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #4
DT-DIATOOL Diamond Core Drill Bits Set - 6/8/10/25/35/50/65mm Tile Hole Saw + 10mm Diamond Milling/Finger Bit + 50mm Diamond Chamfer Bit + Hex Adapter for Porcelain Tile Ceramic Marble Granite
Asin: B0CM5YNZZC | Ean: 0759039777697 | UPC: 759039777697
【Machine】Angle Grinder. Recommend Rpm: 6000. Max Rpm: 11000. Please Try To Get As Close As Possible To The Recommended Drilling Speed To Help Prolong Service Life. If You Fit Them On Hand Drills, You Can Use Hex Adapter. And Don't Use Hammer Or Impact Mode..
【Long Life】Vaccum Brazed Technology Enables A Stronger Bond Between Diamond, Bond And Substrate, Greatly Improving The Drill Bit's Life And Work Fficiency..
【Fast Drilling】Serrated Special Cutter Head Greatly Improves Sharpness And Drilling Speed; Serrated Cutter Head Has Several Chip Removal Slots, Dust Can Be Quickly Discharged When Drilling, Not Easy To Be Clogged..
【Application】Dry Or Wet Use In Ceramic Tile, Porcelain Tile, Marble And Granite. Wet Use Extends Life. Not For Wood, Glass And Any Metal Material. Diamond Milling Bit And Chamfer Bit Cannot Be Used For Drilling, Just For Enlarging, Trimming Or Beveling Holes..
Features
- Specification 7pcs Core Drill Bit Diameter 6/8/10/25/35/50/65mm, diamond height 10mm, Thread: 5/8"-11; Diamond grit: #35/40. 1pc diamond milling bit 10mm, total length 65mm,diamond height 40mm;diamond grit #45/50. 1pc diamond chamfer bit diameter 50mm, total length 55mm, diamond height 46mm; diamond grit #80. 1pc 5/8" tharead to hex adapter.
- Application Dry or wet use in ceramic tile, porcelain tile, marble and granite. Wet use extends life. Not for wood, glass and any metal material. Diamond milling bit and chamfer bit cannot be used for drilling, just for enlarging, trimming or beveling holes.
- Machine Angle Grinder. Recommend RPM: 6000. Max RPM: 11000. Please try to get as close as possible to the recommended drilling speed to help prolong service life. If you fit them on hand drills, you can use hex adapter. And don't use hammer or impact mode.
- Fast drilling Serrated special cutter head greatly improves sharpness and drilling speed; Serrated cutter head has several chip removal slots, dust can be quickly discharged when drilling, not easy to be clogged.
- Long life Vaccum brazed technology enables a stronger bond between diamond, bond and substrate, greatly improving the drill bit's life and work fficiency.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Warranty: If the product is found to be deformed due to shipping or received in error after opening the package, it will be replaced free of charge within 90 days.
See On Amazon #5
DT-DIATOOL Diamond Drill Bits Set Tile Hole Saw 1/4 5/16 3/8" for Dry Drilling Porcelain Ceramic Granite Marble Masonry Stone(6/6/6/8/10mm, 5-Pack)
Asin: B0BMPJ115R | Ean: 0791180060334 | UPC: 791180060334
Carbide Triangular Drill Bit: Total Length 77Mm. Used To Provide Accurate Positioning For Diamond Bit, Not For Drilling..
Applicable Machines: Electric Hand Drill, Bench Drill, Etc; Please Ensure That The Drill Speed Is Over 2000Rpm. The Higher The Drilling Speed, The Longer The Product Life..
Operation: Drilling For Granite, Porcelain Tile, Ceramic Tile, Marble, Stone, Masonry..
Quick-Fit Shank Drill Bits: Diameter 1/4”(6Mm), Total Length 68Mm, Diamond Height 10Mm. Diameter 5/16”(8Mm),3/8"(10Mm), Total Length 80Mm, Diamond Height 10Mm. Wax Inside For Cooling, Dry Drilling Without Water..
Features
- Total 5pcs/set: 4pcs quick-fit hex shank drill bits(6/6/8/10mm) + 1pc 6mm carbide triangular drill bit.
- Quick-fit Shank drill bits: diameter 1/4 (6mm), total length 68mm, diamond height 10mm. Diameter 5/16 (8mm),3/8(10mm), total length 80mm, diamond height 10mm. Wax inside for cooling, dry drilling without water.
- Carbide triangular drill bit: total length 77mm. Used to provide accurate positioning for diamond bit, not for drilling.
- Operation: Drilling for granite, porcelain tile, ceramic tile, marble, stone, masonry.
- Applicable machines: Electric hand drill, bench drill, etc; Please ensure that the drill speed is over 2000RPM. The higher the drilling speed, the longer the product life.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.59 x 3.35 x 2.36 Inches
See On Amazon #6
DT-DIATOOL Diamond Floor Polishing Pads Resin Bond Terrazzo Floor Diameter 4 Inch Grit 1500 Pack of 6
Asin: B07JBXCK9R | Ean: 0734602259596 | UPC: 734602259596
Suitable For Processing, Repairing And Renovating Concrete Floor, Cement Floor, Terrazzo Floor.
Strong Grinding Force, Good Durability, Low Cost Per Square Foot.
Dry Or Wet Grinding Or Polishing, Wet Working Could Be Get Better Performance.
Diameter 100Mm 4 Inch , Total Thickness 10.5Mm, Workable Thickness 9Mm Diamond Grit 1500.
Features
- DT-DIATOOL 6 pcs 100mm Diamond Floor Polishing Pads Sanding disc for concrete cement terrazzo
- Diameter 100mm 4 Inch , Total thickness 10.5mm, workable thickness 9mm Diamond Grit 1500
- Suitable for processing, repairing and renovating concrete floor, cement floor, terrazzo floor
- Dry or Wet Grinding or polishing, wet working could be get better performance
- Strong grinding force, good durability, Low Cost Per Square Foot
- See more on Amazon...
Brand: DT-DIATOOL
Dimensions: 0.41 x 3.94 x 3.94 Inches
See On Amazon #7
DT-DIATOOL Diamond Finger/Milling bits for Tile Porcelain Hard Ceramic Diameter 10mm
Asin: B07MF12VB6 | Model: DT97811058 | PartNumber: DT97811058 | Ean: 0734602264262 | UPC: 734602264262
Enlarge, Shape And/Or Round Bevel Existing Holes In Porcelain, Hard Ceramic, Marble And Granite.
Used On Angle Grinder, Very Easy To Operate..
Vacuum Brazed Technology Provide High Efficient Working Performance.
10Mm Diameter, 50Mm Workable Length, 5/8-11 Thread, Grit #50/60, Toal Length 75Mm.
Features
- 1pc 10mm Vacuum Brazed Diamond finger bits Milling bits for tile, stone,
- 10MM Diameter, 50MM workable length, 5/8-11 Thread, Grit #50/60, toal Length 75MM
- Enlarge, shape and/or round bevel existing holes in Porcelain, Hard Ceramic, marble and granite
- Vacuum brazed technology provide high efficient working performance
- Used on angle grinder, very easy to operate.
- See more on Amazon...
Brand: DT-DIATOOL
Dimensions: 2.95 x 0.39 x 0.39 Inches
See On Amazon #8
Diamond Blade 5 Inch for Granite, 2 Pieces DT-DIATOOL Diamond Cutting Disc for Hard Concrete Reinforced Concrete Masonry Basalt Artificial Stone
Asin: B0CL6RL28J | Ean: 0759039779103 | UPC: 759039779103
Machine: For All Standard Grinders, Circular Saw, Masonry Saw, Etc. Recommended Rpm:7000; Max Rpm:12000. Use The Saw Blade In The Direction Of The Arrow Marked On The Blade..
Hot Press Sintering Process; With High-Quality Diamond And Igh-Strength Steel Body Combined, Saw Blade With Good Hardness, Stronger Toughness And High Temperature Resistance..
High Speed Diamond Cutting Disc With 12Mm V-Turbo Segments For An Extremely Fast Cut. Smooth Cutting Surface With Less Debris, Stable Performance; Good For Heat Dissipation..
Wide Use: Dry Cutting Of Construction Materials Such As Granite, Hard Concrete Products, Reinforced Concrete, Masonry, Basalt, Artificial Stone, Natural Stone, Hard Stone, Etc..
Features
- Specification: Diameter 5 inch/125mm; diamond segments' height 12mm; thickness 2.2mm; Diamond grit #40/50. Bore 7/8", with a 5/8" washer. The washer(gasket) in the center of the saw blade is removable. It can be installed or removed to match the arbor of your machine.
- Wide Use: Dry cutting of construction materials such as granite, hard concrete products, reinforced concrete, masonry, basalt, artificial stone, natural stone, hard stone, etc.
- Machine: For all standard grinders, circular saw, masonry saw, etc. Recommended RPM:7000; Max RPM:12000. Use the saw blade in the direction of the arrow marked on the blade.
- High speed diamond cutting disc with 12mm V-turbo segments for an extremely fast cut. Smooth cutting surface with less debris, stable performance; good for heat dissipation.
- Hot Press Sintering Process; With high-quality diamond and igh-strength steel body combined, saw blade with good hardness, stronger toughness and high temperature resistance.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #9
DT-DIATOOL Diamond Finger Milling Bits Diameter 3/8 inch to 1 inch for Enlarging Beveling Shaping Existing Holes of Porcelain Tile Hard Ceramic Granite Marble, with 5/8 -11 Thread
Asin: B0BVFYVZLH | Model: DT9783102558 | PartNumber: DT9783102558 | Ean: 0791180060907 | UPC: 791180060907
Application: Not Recommended To Use As A Drill Bit For Drilling; Mainly Used For Reaming The Existing Hole Or Process The Hole In A Special Shape. Main Applicable Materials: Ceramic Tile, Porcelain Tile, Marble, Artificial Stone, Granite, Etc..
Premium Raw Material: High Quality Steel And Diamond, Stable Work And Higher Efficiency..
Technology: Vacuum Brazing Processing Technology, Diamond Firmly Embedded. The Average Service Life Is 3-5 Times That Of Electroplated Tools..
Machine: 5/8”-11 Thread. Suitable For 5/8” Grinder. Recommended Rpm: 6000. Maximum Rpm: 11000..
Features
- Size: Total length 65mm, diamond height 50mm. Grit:#50/60, sharper shaping holes. Diameter 10-25mm, double-size finger bit can grinding more sizes of holes and no need for frequent change tools during operation. Save your storage, time and money.
- Machine: 5/8 -11 thread. Suitable for 5/8 grinder. Recommended RPM: 6000. Maximum RPM: 11000.
- Application: Not recommended to use as a drill bit for drilling; Mainly used for reaming the existing hole or process the hole in a special shape. Main applicable materials: ceramic tile, porcelain tile, marble, artificial stone, granite, etc.
- Technology: Vacuum brazing processing technology, diamond firmly embedded. The average service life is 3-5 times that of electroplated tools.
- Premium raw material: High quality steel and diamond, stable work and higher efficiency.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #10
DT-DIATOOL Daimond Core Drill Bit - Vaccum Brazed Hole Saw 6 8 10mm 3pcs with 5/8"-11 Thread Drilling for Procelain Tile Ceramic Stoneware Marble Granite Stone Brick
Asin: B07JDZSJ54 | Model: DT9656210S7 | PartNumber: DT9656210S7 | Ean: 0734602258285 | UPC: 734602258285
Recommend Machine: 5/8" Arbor Angle Grinder. Recommended Rpm:6000. Maximum Rpm:11000.If You Fit Them On Hand Drills, You Need An Adapter, Such As Sds, Hex, Round Plus Shank, Etc.Do Not Use Hammer Mode..
Fast And Smooth Drilling And Less Chipping. Wax Inside For Cooling The Bits..
Vaccum Brazing Technology Enables A Strong Bond Between Diamond, Bond And Substrate, Greatly Improving Tool Life And Machining Efficiency..
Dry Or Wet Drilling For Porcelain Tile,Ceramic, Granite, Marble, Stone, Ect..
Features
- Diameter 6/8/10mm: 5/8"-11 thread, total length 60mm; diamond height 10mm; max working depth 35mm; Grit: #35/40.
- Dry or wet drilling for porcelain tile,ceramic, granite, marble, stone, ect.
- Recommend Machine: 5/8 arbor angle grinder. Recommended RPM:6000. Maximum RPM:11000.If you fit them on hand drills, you need an adapter, such as SDS, hex, Round plus shank, etc.Do not use hammer mode.
- Vaccum brazing technology enables a strong bond between diamond, bond and substrate, greatly improving tool life and machining efficiency.
- Fast and smooth drilling and less chipping. Wax inside for cooling the bits.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOO
See On Amazon #11
DT-DIATOOL 7 Inch Diamond Turbo Blade Cutting Granite Marble Concrete Brick with Slant Protection Teeth for Angle Grinder
Asin: B08Z77MJVL | Model: DT142070858 | PartNumber: DT142070858 | Ean: 0791180074287 | UPC: 791180074287
Can Be Used On Cutting And Grinding, Multi-Purpose Cutting, Efficient In Deep Cutting.
Machine: Angle Grinder.
Cutting Stone And Construction Material Concrete Brick Tile Granite Marble Masonry.
Diameter 180Mm/7", Thickness Of Segment 2.4-2.5Mm, Height Of Segments 8Mm, Bore: 5/8-11 Flange.
Features
- DT-DIATOOL 1pc Hot pressed Diamond turbo Blade with Slant protection teeth
- Diameter 180mm/7, Thickness of segment 2.4-2.5mm, Height of segments 8MM, Bore: 5/8-11 Flange
- Can be used on cutting and grinding, Multi-purpose cutting, efficient in deep cutting
- Cutting stone and construction material concrete brick tile granite marble masonry
- Machine: Angle grinder
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #12
DT-DIATOOL Dry Diamond Polishing Pads 4 Inch for Granite Marble Quartz Stone Countertop Tiles 8 Pieces Grits 50
Asin: B08XNHFMPZ | Model: DT7220415BG50x8 | PartNumber: DT7220415BG50x8 | Ean: 0791180074492 | UPC: 791180074492
Dry Polishing, Working Without Water, Convenient And Less Pollution..
Good Performance On Granite, Marble, Stones, Quartz And Tiles..
Recommended Speed: 2500Rpm, Max Capacity Is 4000Rpm.
Diameter 100Mm/4Inch", Thickness 4Mm; Flexible, Suitable For Different Shape Polishing.
Features
- 8 Pieces Dry Diamond Polishing pads Grit 50, 8 Pieces/Pack
- Diameter 100mm/4inch, thickness 4mm; Flexible, suitable for different shape polishing
- Dry polishing, working without water, convenient and less pollution.
- Recommended speed: 2500RPM, Max capacity is 4000RPM
- Good Performance on granite, marble, stones, quartz and tiles.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.20 x 0.00 x 0.00 Inches | Weight: 0.39 pounds
See On Amazon #13
DT-DIATOOL 4.5 Inch Concrete Grinding Wheel Granite Marble with Double Row Diamond Segment
Asin: B07HV8CTZY | Ean: 0734602258506 | UPC: 734602258506
Application For Concrete, Brick，Hard Stone Granite, Marble Ect..
Double Row Design And 40/50 Grits Provide Good Finishing.
Can Be Used On Most Angle Grinder Or Grinder Machine.
Diameter 4.5"/115Mm, Diamond Height 5Mm, Diamond Grits #40/50, 5/8-11 Thread,.
Features
- DT-DIATOOL 1pc Welded Diamond Double Row Cup Wheel
- Diameter 4.5/115MM, Diamond height 5MM, Diamond Grits #40/50, 5/8-11 Thread,
- Application for concrete, Brick hard stone granite, marble ect.
- Can be used on most angle grinder or grinder machine
- Double row design and 40/50 grits provide good finishing
- See more on Amazon...
Brand: DT-DIATOOL
Dimensions: 1.24 x 4.53 x 4.53 Inches
See On Amazon #14
DT-DIATOOL Diamond Drill Bits 6/8/10/16/19/25/32/51mm with 10mm Diamnod Milling Bit for Porcelain Tile Ceramic Marble Granite Stone Hole Saw Kit (9-Pack)
Asin: B0BCPL664K | Model: DT965K9T | PartNumber: DT965K9T | Ean: 0791180061867 | UPC: 791180061867
【Application】Not Only For Dry Or Wet Drilling But Also Grindig For Porcelain Ceramic Tiles, Granite, Masonry,Marble,Concrete,Etc..
【Machine】Recommended Machine: 5/8"-11 Thread Angle Grinder. Recommended Rpm 6000.Maximum Rpm 11000..
【Advanced Diamond Technology】Vacuum Brazing Technology Makes The Diamond Firmly Bonded To The Matrix, And The Diamond Exposure Is Higher, The Processing Efficiency Is Higher, And The Service Life Is Longer..
【Multifunction】8-Piece Core Drill Bits Can Make Different Holes For Tiles Or Stone Building Materials. 1Pc Finger Bit Helps Enlarge And Clean Rough Holes For Your Needs..
Features
- Specification 9pcs/set(including 8pcs drill bits+1pc finger bit). Drill Bits 6-10mm: 5/8"-11 connection; Total length 60mm; Diamond height 10mm; Dia 16mm-51mm: 5/8"-11 connection; Total length 75mm; Diamond height 15mm. Finger bits: Dia 10mm; 5/8-11connection; Total length 75mm; Grit #50/60;
- Multifunction 8-Piece core drill bits can make different holes for tiles or stone building materials. 1pc Finger bit helps enlarge and clean rough holes for your needs.
- Application Not only for dry or wet drilling but also grindig for porcelain ceramic tiles, granite, masonry,marble,concrete,etc.
- Advanced diamond technology Vacuum brazing technology makes the diamond firmly bonded to the matrix, and the diamond exposure is higher, the processing efficiency is higher, and the service life is longer.
- Machine Recommended machine: 5/8-11 Thread Angle Grinder. Recommended RPM 6000.Maximum RPM 11000.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #15
DT-DIATOOL Diamond Core Drill Bits Set, 10pcs - 6/6/8/20/35/50/65mm + 6mm Carbide Positioning Drill Bit with Triangle Shank+20mm Finger Bit+50mm Chamfer Bit for Porcelain Tile Ceramic Marble
Asin: B0CL9CN1PG | Ean: 0759039779158 | UPC: 759039779158
【Durable And Sturdy】Vacuum Brazing Processing Technology Make Diamonds Are More Exposed; So That Core Drill Bits Are Sharper And Improve Work Efficiency. The Average Service Life Of Vacuum Brazed Drill Bits Is 3-5 Times That Of Electroplated Tools..
【Good Effect】: U-Grooves Design Helps Chip Removal And Improve The Working Efficiency Of Hole Drilling. #40 Sharp Diamond, Less Debris And Edge Breakage On Materials And Better Finishing Effect..
【Recommended Machine】Hand Drill, Bench Drill. General Hand Drill Speed Is 2000Rpm-5000Rpm. Ensure That The Drilling Speed Is Not Less Than 2000 Rpm. The Higher The Speed, The Longer The Work Life. Don't Use The Impact Or Hammer Mode..
Features
- Application Dry or wet drilling holes in porcelain tile, ceramic, marble, quartz, granite, masonry, etc. Not recommend for drilling glass and wood.
- Recommended Machine Hand drill, bench drill. General hand drill speed is 2000RPM-5000RPM. Ensure that the drilling speed is not less than 2000 RPM. The higher the speed, the longer the work life. Don't use the impact or hammer mode.
- Durable and Sturdy Vacuum brazing processing technology make diamonds are more exposed; So that core drill bits are sharper and improve work efficiency. The average service life of vacuum brazed drill bits is 3-5 times that of electroplated tools.
- Good Effect : U-Grooves Design helps chip removal and improve the working efficiency of hole drilling. #40 sharp diamond, less debris and edge breakage on materials and better finishing effect.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #16
DT-DIATOOL Diamond Core Drill Bits 19/25/35/45/51/65mm with 20mm Finger Bit and 2 Adapters for Porcelain Tile Ceramic Marble Granite Vacuum Brazed Hole Saw Kit
Asin: B07MR5PCDF | Ean: 0734602264446 | UPC: 734602264446
Finger Bit: Diameter 20Mm, 5/8-11 Thread, Total Length: 65Mm. Workable Length 50Mm, Grit #50/60.Finger Bits For Grinding,Enlarging Or Shaping Holes On Porcelain Ceramic Tiles, Granite, Masonry,Marble,Concrete,Etc..
Recommended Machine: Angle Grinder. Recommended Rpm 6000.Maximum Rpm 11000..
Adapters Change 5/8 Inch-11 Thread To 3/8-Inch Hexagon Shank Or M14 Thread And Allow Your Bits To Fit A Wider Range Of Machines..
Durable And Sturdy. Vacuum Brazing Technology Makes The Diamond Firmly Bonded To The Matrix, And The Diamond Exposure Is Higher, The Processing Efficiency Is Higher, And The Service Life Is Longer..
Hex Adapter: 5/8"-11 Male Thread, 3/8" Hexagon Shank;
M14 Adapter: 5/8-11 Male Thread To M14 Female Thread;
.
Drill Bits: Diameter 19Mm-65Mm, 5/8-11 Thread, Total Length 75Mm(3 Inch);Diamond Height 15Mm. Drills Bits For Dry Or Wet Drilling Holes;
.
Features
- Totally 9pcs/box; 6pcs(19/25/35/45/51/65mm) drill bits + 1pc 20mm finger bits + 1pc hex shank adapter + 1pc M14 adapter.
- Drill bits: Diameter 19mm-65mm, 5/8-11 thread, total Length 75mm(3 Inch);diamond height 15mm. Drills Bits for dry or wet drilling holes;
- Finger bit: Diameter 20mm, 5/8-11 thread, total Length: 65mm. Workable length 50MM, Grit #50/60.Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc.
- Hex adapter: 5/8-11 male thread, 3/8 hexagon shank;
M14 adapter: 5/8-11 male thread to M14 female thread;
- Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines.
- Durable and Sturdy. Vacuum brazing technology makes the diamond firmly bonded to the matrix, and the diamond exposure is higher, the processing efficiency is higher, and the service life is longer.
- Recommended machine: Angle Grinder. Recommended RPM 6000.Maximum RPM 11000.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 2.95 x 1.38 x 1.38 Inches
See On Amazon #17
DT-DIATOOL Diamond Drill Bit 1 inch 2pcs Vacuum Brazed Diamond Hole Saw with Triangle Shank Drilling Porcelain Tile Ceramic Marble Granite Masonry Quartz
Asin: B0BWR2XMXQ | Model: DT9712510x2T | PartNumber: DT9712510x2T | Ean: 0791180059840 | UPC: 791180059840
U-Grooves Design: It Helps Chip Removal And Improve The Working Efficiency Of Hole Drilling..
Good Effect: #40 Sharp Diamond, Less Debris And Edge Breakage On Materials And Better Finishing Effect. Applicable Material: Porcelain Tile, Ceramic, Marble, Quartz, Granite, Masonry, Etc. Not Recommend For Drilling Glass..
Advanced Technology: Vacuum Brazing Processing Technology, Diamond Are Firmly Embedded. The Average Service Life Is 3-5 Times That Of Electroplated Tools..
Triangle Shank: Suitable For Hand Drill, Bench Drill. General Hand Drill Speed Is 2000Rpm-5000Rpm. Recommend High Speed Drilling. The Higher The Speed, The Longer The Work Life. Don’T Use The Impact Or Hammer Mode..
Features
- Specification: 2pcs/pack. Diameter 25mm, total length 65mm, diamond height 10mm. Work length 29mm. Grit #40/45.
- Triangle Shank: Suitable for hand drill, bench drill. General hand drill speed is 2000RPM-5000RPM. Recommend high speed drilling. The higher the speed, the longer the work life. Don t use the impact or hammer mode.
- U-Grooves Design: It helps chip removal and improve the working efficiency of hole drilling.
- Advanced Technology: Vacuum brazing processing technology, diamond are firmly embedded. The average service life is 3-5 times that of electroplated tools.
- Good Effect: #40 sharp diamond, less debris and edge breakage on materials and better finishing effect. Applicable material: porcelain tile, ceramic, marble, quartz, granite, masonry, etc. Not recommend for drilling glass.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #18
DT-DIATOOL Concrete Polishing Pads 3 inch/80mm for Concrete, Cement and Terrazzo Floors Processing, Repairing and Renovating, Dry or Wet Use Diamond Grinding Pads Grit 800 3pcs
Asin: B0BM9HDL8J | Ean: 0791180060631 | UPC: 791180060631
Suitable For Processing, Repairing And Renovating Concrete Floor, Cement Floor, Terrazzo Floor.Not Recommended For Very Soft Concrete.Use Them From Coarse To Fine, The Final Polishing..
High-Grade Quality, Strong Grinding Force, Improve Work Efficiency. ; Good Abrasion Resistance And Long Service Life..
Dry Or Wet Grinding Or Polishing; Dry Working Could Be Get Better Performance..
For Floor Grinder Machine.Recommended Speed Is 2500Rpm, Max Rpm Is 4000Rpm..
Features
- Package contains 3 pieces grit 800 diamond polishing pads. Specification: Diameter 80mm/3" , Workable thichness 10mm; Total thickness 12mm.
- For floor grinder machine.Recommended speed is 2500RPM, Max RPM is 4000RPM.
- Suitable for processing, repairing and renovating concrete floor, cement floor, terrazzo floor.Not Recommended for very soft concrete.Use them from coarse to fine, the final polishing.
- Dry or Wet Grinding or polishing; Dry working could be get better performance.
- High-grade quality, strong grinding force, improve work efficiency. ; Good abrasion resistance and long service life.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #19
DT-DIATOOL Diamond Beveling Chamfer Bit 1 Inch with Hex Shank for Tile Porcelain Ceramic Granite Marble Existing Holes Enlarging Polishing Shaping Trimming Repairing
Asin: B0CL5RKXQQ | Ean: 0759039780499 | UPC: 759039780499
Recommended Machine: Hand Drill; Please Note That If You Use It On A Hand Drill, Please Do Not Use The Hammering Mode And Keep The Drilling Speed Above 2000Rpm..
Vacuum Brazing Technology Keeps Grit 80 Diamonds More Exposed For Better Working Effect..
Dry Or Wet Use. For Dry Use, Please Bring Your Protective Gear To Protect Your Eyes And Mouth From Dust. Wet Use Is Less Dusty, More Conducive To Heat Dissipation, And Can Extend The Life Of The Product Wet Use..
Not For Drilling Holes, But Designed To Enlarge, Shape, Polish, Clean, Trim, Finish, Round Or Bevel Existing Rough Holes Of Marble Ceramic Porcelain Tiles Granite..
Features
- Dia 25mm/1": total length 52mm; workable length 25mm;Hexagonal Shank; Grit #80; Top angle 53 degree.
- Not for drilling holes, but designed to enlarge, shape, polish, clean, trim, finish, round or bevel existing rough holes of marble ceramic porcelain tiles granite.
- Recommended machine: hand drill; Please note that if you use it on a hand drill, please do not use the hammering mode and keep the drilling speed above 2000RPM.
- Dry or wet use. For dry use, please bring your protective gear to protect your eyes and mouth from dust. Wet use is less dusty, more conducive to heat dissipation, and can extend the life of the product wet use.
- Vacuum brazing technology keeps grit 80 diamonds more exposed for better working effect.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 2.05 x 0.98 x 0.98 Inches | Weight: 0.13 pounds
See On Amazon #20
DT-DIATOOL Diamond Tile Blade 4-1/2 Inch Diamond Turbo X Mesh Rim Segement Circular Saw Blade for Procelain Ceramic Stoneware Marble Granite Fits 5/8"-7/8" Arbor
Asin: B07LC794B4 | Ean: 0734602264514 | UPC: 734602264514
More Efficient: X Mesh Turbo Rim Segments Design Helps Cool The Segments And Bring The Dust Out,So That It Can Get More Efficient And Better Performance..
Application: For Cutting Ceramic Tile, Porcelain Tile, Marble, Granite (Not Recommended For Very Hard Granite). Dry Or Wet Use..
Long Life: Hot-Pressed Sintered Technology And Blade With Very High Quality Diamond Provide Long Working Life. Reinforced Ring Core Makes Cutting More Stable And Get Better Finishing..
Machine: Suitable For Angle Grinders All Brands, Circular Saw,Ect.Recommended Rpm:8000. Maxmium Rpm:13200. Please Note Whether The Diameter Of The Product Bore Matches The Diameter Of The Machine Aobor..
Features
- Size: Diameter 115mm(4-1/2 Inch), Diamond height 10mm, Segment thickness 1.2mm. Bore 22.23mm, fits 7/8 inch arbor.Grit: #60/70.
- Machine: Suitable for angle grinders all brands, circular saw,ect.Recommended RPM:8000. Maxmium RPM:13200. Please note whether the diameter of the product bore matches the diameter of the machine aobor.
- More efficient: X mesh turbo rim segments design helps cool the segments and bring the dust out,so that it can get more efficient and better performance.
- Long life: Hot-pressed sintered technology and blade with very high quality diamond provide long working life. Reinforced ring core makes cutting more stable and get better finishing.
- Application: For cutting ceramic tile, porcelain tile, marble, granite (not recommended for very hard granite). Dry or wet use.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.05 x 4.53 x 4.53 inches
See On Amazon #21
DT-DIATOOL Diamond Blade 4 Inch Cutting & Grinding Disc for Beveling Edge of Porcelain Tile Ceramic Marble Artificial Stone
Asin: B0CR9XB9X9 | Ean: 0759039775488 | UPC: 759039775488
【Application】Can Be Cut In A Straight Line Or At Some Angle (Like Mitre Cutting); Can Grind Edges, Can Grind Grooves Horizontally..
【Hot Press Sintering Technology】The Overall Hardness Is Stronger, Better Toughness, More Stable And Safe..
【Triangular Cutter Head Design】Double-Sided 25Mm Cutter Head Height; Fast And Stable Cutting; Neat And Smooth Cutting And Grinding..
【Machine And Rpm】Recommended For Angle Grinder Or Circular Saw; Recommended Rpm: 9000. Max Rpm: 15000..
Features
- Specification Diameter 4 inch=105mm; thickness 1.7mm; diamond height 20mm; Bore 7/8"=22.23mm; With a 7/8"- 5/8" washer. The blade can be mounted directly on a 5/8" angle grinder; If it needs to be mounted on a machine with a 7/8" fitting, the gold washer in the center of the blade can be removed.
- Machine and RPM Recommended for angle grinder or circular saw; Recommended Rpm: 9000. Max Rpm: 15000.
- Application Can be cut in a straight line or at some angle (like mitre cutting); can grind edges, can grind grooves horizontally.
- Triangular cutter head design Double-sided 25mm cutter head height; fast and stable cutting; neat and smooth cutting and grinding.
- Hot press sintering technology The overall hardness is stronger, better toughness, more stable and safe.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #22
DT-DIATOOL Diamond Blade 5 Inch for Granite Marble Block Diamond Cutting Disc with Turbo Cutter Heads and Multiple Holes
Asin: B07JLYZZQS | Ean: 0734602260714 | UPC: 734602260714
Dry Or Wet Cutting. Wet Use Prolong The Blade's Life..
Multi-Holes In The Blade Help Cooling The Steel Core And Lower Noise When Cutting..
Narrow Turbo Segments Design Helps Cut More Efficiently..
Diameter 125Mm (5 Inch); Segment Height 10Mm; Segments' Thickness 2.0-2.1Mm; Bore: 7/8" (22.23Mm). For 7/8" Grinder..
Features
- Package contains 1pc 5 Inch diamond blade with turbo segments.
- Diameter 125mm (5 Inch); Segment height 10mm; Segments' thickness 2.0-2.1mm; Bore: 7/8 (22.23mm). For 7/8 Grinder.
- Dry or Wet cutting. Wet use prolong the blade's life.
- Narrow turbo segments design helps cut more efficiently.
- Multi-holes in the blade help cooling the steel core and lower noise when cutting.
- See more on Amazon...
Brand: DT-DIATOOL
Dimensions: 0.08 x 4.92 x 4.92 Inches
See On Amazon #23
DT-DIATOOL 4.5 Inch Concrete Grinding Wheel Granite Marble with Turbo Row Diamond Segment
Asin: B07J4KHXVT | Ean: 0734602258582 | UPC: 734602258582
Can Be Used On Most Angle Grinder Or Grinder Machine.
Good Performance On Efficiency And Working Life.
Dry Or Wet Grinding Cutting.
Diameter 4.5 Inch/115Mm, 5/8-11 Thread, Diamond Height 5Mm,Diamond Grits #30/40.
Features
- DT-DIATOOL 1pc Premium Welded Diamond Segmented Turbo Cup Wheel 5/8-11 Thread
- Diameter 4.5 Inch/115MM, 5/8-11 Thread, Diamond height 5MM,Diamond Grits #30/40
- Can be used on most angle grinder or grinder machine
- Dry or wet Grinding cutting
- Good performance on efficiency and working life
- See more on Amazon...
Brand: DT-DIATOOL
Dimensions: 1.24 x 4.53 x 4.53 Inches
See On Amazon #24
DT-DIATOOL Diamond Tile Saw Blade 4 Inch Porcelain Cutting Disc Arbor 7/8"- 5/8" for Angle Grinder Cutting Ceramic Granite Marble Artificial Stone 2pcs
Asin: B07JJB9N62 | Model: DT136040820x2 | PartNumber: DT136040820x2 | Ean: 0734602259886 | UPC: 734602259886
Ultra Thin Cutter Head Provides Fast Cutting Without Edge Collapse.Turbo Teeth Design Fast Chip Evacuation, Smooth Cutting..
Suitable For Angle Grinder,Circular Saw,Etc. Recommended Rpm: 9000; Maximum Rpm: 15000..
Hot Pressing Sintering Process And High Strength Steel Matrix Ensure Longer Life..
Dry Or Wet Cutting, For Procelain Tile Ceramic Tile, Marble Granite And Other Hard Material..
Features
- Size: Diameter 105mm/4" Segment height 8mm Segments thickness 1.17mm Bore: 20mm with a 16mm Reducer washer.
- Dry or wet cutting, for procelain tile ceramic tile, marble granite and other hard material.
- Ultra thin cutter head provides fast cutting without edge collapse.Turbo teeth design fast chip evacuation, smooth cutting.
- Hot pressing sintering process and high strength steel matrix ensure longer life.
- Suitable for angle grinder,circular saw,etc. Recommended RPM: 9000; Maximum RPM: 15000.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.05 x 4.13 x 4.13 Inches
See On Amazon #25
DT-DIATOOL Diamond Grinding Cup Wheel Vacuum Brazed Granite Marble Diameter 5 Inch
Asin: B07JJ3F5B6 | Ean: 0734602259817 | UPC: 734602259817
Dry Or Wet Working.
Easy To Operate And Safer For Operater.
Vacuum Brazed Technology Provide Faster Grinding Speed And Longer Working Life.
Diameter 125Mm 5 Inches Bore 22.23Mm , Diamond Grit #30/40.
Features
- DT-DIATOOL 1pc 5 Inch High Quality Vacuum Brazed Diamond Grinding Disc
- Diameter 125mm 5 inches Bore 22.23mm , Diamond grit #30/40
- Dry or Wet working
- Vacuum Brazed Technology provide faster grinding Speed and longer working life
- Easy to operate and safer for operater
- See more on Amazon...
Brand: DT-DIATOOL
Dimensions: 0.61 x 4.92 x 4.92 Inches
See On Amazon #26
DT-DIATOOL Core Drill Bit Adapter 5/8"-11 Male to 3/8" Hex Shank for Electric Hand Drills for Diamond Core Drill Bit Hole Saw
Asin: B07K43T68Q | Ean: 0734602261568 | UPC: 734602261568
5/8"-11 Thread Core Bits Can Be Fitted On Hand Drill Or Electric Drill.
Good Quality Steel, Long Life, And Surface Nickel Plating.
5/8-11 Male Thread, 3/8 Hexagon Shank, Total Length 53Mm, Shank Length 28Mm.
Features
- DT-DIATOOL 1pc Adapter 5/8-11 male thread to 3/8 hexagon shank for drill core bits grinding disc
- 5/8-11 male thread, 3/8 Hexagon Shank, total length 53MM, shank length 28MM
- 5/8-11 thread core bits can be fitted on hand drill or electric drill
- Good quality steel, long life, and Surface Nickel plating
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #27
DT-DIATOOL Diamond Blade 4.5 Inch Pack of 2 for Marble Ceramic Tile Porcelain Tile Granite Artificial Stone Vacuum brazed Diamond Cutting Disc for Angle Grinder Circular Saw
Asin: B0C8RVSL25 | Ean: 0759039780864 | UPC: 759039780864
Advanced Vacuum Brazing Process Provides Longer Service Life. High-Strength Steel Substrate, Strong And Durable, Provides Safe And Smooth Cutting..
Applicable Machine: Circular Saw,Angle Grinder. Recommended Rpm:8000; Max Rpm: 13200..
Wet And Dry For Cutting Marble, Tile, Granite, Artificial Stone, Etc..
#80 High Grade Diamond Particles, Significantly Improve The Sharpness And Wear Resistance Of The Saw Blade. Serrated Cutter Head Design, Conducive To Chip Removal And Heat Dissipation, Brings Efficient Working Performance..
Features
- Diameter 115mm; Diamond segment height 10mm; Bore 22.23mm, with a 22.23-15.875mm washer.
- #80 high grade diamond particles, significantly improve the sharpness and wear resistance of the saw blade. Serrated cutter head design, conducive to chip removal and heat dissipation, brings efficient working performance.
- Advanced vacuum brazing process provides longer service life. High-strength steel substrate, strong and durable, provides safe and smooth cutting.
- Wet and dry for cutting marble, tile, granite, artificial stone, etc.
- Applicable machine: circular saw,angle grinder. Recommended RPM:8000; Max RPM: 13200.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #28
DT-DIATOOL Diamond Tile Blade 5 Inch - Diamond Double-Sided Cutting Disc for Porcelain Ceramic Marble Edge Grinding with Fan-Shaped Cutter Head
Asin: B0CGNPY826 | Ean: 0759039780284 | UPC: 759039780284
Thickness 1.8Mm, This Diamond Blade With Fan Pattern On Both Front And Back, Cutting And Grinding On Both Sides. Diamond Grit #60/70, Less Debris..
Wear Protective Gear When Operating And Do Not Cut Metal Or Wood With This Diamond Blade..
Cutter Head Height 25Mm For High-Efficient Cutting. The Diamond Blade Itself Is A High-Strength Steel Matrix Combined With High-Quality Emery, Overall Hardness Is Stronger, Providing Stable And Safe Cutting..
Bore 7/8" (22.23Mm); With 1 Golden Washer. The Gold Washer(Gasket) In The Center Of The Saw Blade Is Removable. When The Diamond Blade Is With Washer, It Can Be Mount On A 5/8" Arbor Cutter; When The Washer Removed, It Can Be Hooked Up To A 7/8" Arbor Machine. For 5 Inch Diamond Blade, The Recommended Rpm: 7000; Max Rpm:12000..
Features
- Multi-function : Cutting and grinding. Applicable materials: ceramic tile, porcelain tile, marble, artificial stone. The blade can cut in a straight line or miter cut at a fixed angle; it can grind the edge of the stone or grind the groove horizontally.
- Bore 7/8 (22.23mm); With 1 golden washer. The gold washer(gasket) in the center of the saw blade is removable. When the diamond blade is with washer, it can be mount on a 5/8 arbor cutter; When the washer removed, it can be hooked up to a 7/8 arbor machine. For 5 inch diamond blade, the recommended RPM: 7000; Max RPM:12000.
- Thickness 1.8mm, this diamond blade with fan pattern on both front and back, cutting and grinding on both sides. diamond grit #60/70, less debris.
- Cutter head height 25mm for high-efficient cutting. The diamond blade itself is a high-strength steel matrix combined with high-quality emery, overall hardness is stronger, providing stable and safe cutting.
- Wear protective gear when operating and do not cut metal or wood with this diamond blade.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.04 x 4.92 x 4.92 Inches
See On Amazon #29
Diamond Tile Drill Bit Set,DT-DIATOOL Porcelain Hole Saw with Hex Shank Double Ended 6-6mm 5pcs for Drilling Ceramic Marble Artificial Stone Granite
Asin: B0BFDRRGPC | Model: DT9756610x5 | PartNumber: DT9756610x5 | Ean: 0791180061317 | UPC: 791180061317
【Specification】Both Double Ended Diameter Are 6Mm.Total Length 80Mm, Diamond Height 10Mm, Workable Depth 20Mm. Hex Shank, Shank Diameter 8.35Mm. Grit: #45/50.
【Vacuum Brazed Diamond Technology】High-Density Diamonds Are Brazed More Firmly To The Matrix And Provide Longer Service Life. #45/50 Diamond Is Sharp To Drill Holes In The Ceramic And Porcelain Tiles..
【Application】Used On Hand Drill, Bench Drill, Etc. Recommended Rpm: 2000-5000Rpm. Suitable For All Tiles, Marble, Artificial Stone, Granite, Stoneware And Quartz..
【Easy To Use】There Is Wax Inside The Drill Bit. No Need For Additional Water Cooling And Increases Drilling Speed..
Features
- Lower cost Dual drill bit design, one drill for two purposes, providing ultra-high cost performance.
- Easy to use There is wax inside the drill bit. No need for additional water cooling and increases drilling speed.
- Specification Both Double Ended Diameter are 6mm.Total length 80mm, diamond height 10mm, workable depth 20mm. Hex Shank, shank diameter 8.35mm. Grit: #45/50
- Application Used on hand drill, bench drill, etc. Recommended RPM: 2000-5000RPM. Suitable for all tiles, marble, artificial stone, granite, stoneware and quartz.
- Vacuum Brazed Diamond Technology High-density diamonds are brazed more firmly to the matrix and provide longer service life. #45/50 diamond is sharp to drill holes in the ceramic and porcelain tiles.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.43 x 2.24 x 3.19 Inches
See On Amazon #30
DT-DIATOOL Rubber Backer Pad 4 Inch - Hook Loop Backing pad with Arbor 5/8" 11 for Wet Dry Polishing
Asin: B07K3YZ62Q | Ean: 0734602261469 | UPC: 734602261469
Backer For Diamond Polishing Pads, Sanding Disc, And Grinding Discs.
Rubber Body Soft And Strong, Cooper Thread, Strong Body Provide Longer Working Life And Can Bear Heavy Duty Working And A Little Flexible.
Diameter 4 Inch,Rubber Based, 5/8-11 Thread.
Features
- DT-DIATOOL 1pc 4 inch Rubber base Backer pad for diamond polishing pads with 5/8-11 Thread
- Diameter 4 inch,Rubber based, 5/8-11 Thread
- Backer for diamond polishing pads, sanding disc, and grinding discs
- Rubber body soft and strong, Cooper thread, strong body provide longer working life and can bear heavy duty working and a little flexible
- See more on Amazon...
Brand: DT-DIATOOL
See On Amazon