DUOYI - Buying Guide

Bestselling from DUOYI on Amazon

1. Jack Ratchet Wrench For Scissor Auto Jack Wrench Head Reinforced Design&Labor-Saving Tire Wheel Jack...
2. Upgraded Compression Ring Removal Tool Not Damage Copper Pipes/Brass Nuts Ferrule Puller for NPT 1/2...
3. Updated Fuel Injector Tester Four-Wire Dual Channel Fuel Injector Cleaner Kit 8 Pulse Modes Injector...
4. Digital Manifold Gauge Set Pressure&Temp Test HVAC Manifold Pressure Leak Test Digital Refrigerant G...
5. DUOYI Terminal Removal Tool Kit 23 Pcs, Terminal Ejector Kit with Stainless Steel Tips, Ergonomic Ru...
6. Brake Caliper Socket Set 16 Specifications Brake Caliper Removal Tool Kit High Torque 1/2" Square Dr...
7. Spark Plug Tester 0 to 6000rpm Adjustable Spark Tester with Two Spark Plug Socket 100-240v with Prot...
8. Gear Puller Set 2/3 Jaw Puller Bearing Puller Kit 3",4",6 ",8 "Pulley Puller Tool Dual Hole Adjustab...
9. Axle Spindle Thread Chaser Set Repair/Clean Thread Chaser Set with Metric M20 M22 M24 & UNF 13/16 3/...
10. Updated OBD2 Extension Cable Reinforced Nylon ODB2 Extension Cable Anti-Tear/Aging OBD2 Extension Co...

Features

• Reinforced Head Design & Universal Adapter The head of the car jack ratchet wrench adopts a reinforced design,the reinforced ratchet head is stronger and labor-saving,and can be used for scissor jacks with a thickness of 0.5cm/0.19 inches.In addition,jack ratchet wrench is equipped with a detachable conversion head,when the jack head is too large or double-headed, the jack and car jack wrench can be perfectly connected through the installation adapter, which has wider applicability.
• Not Easy To Fall Off & Head Reinforced Design &Forged With Thickened Steel & High Hardness & High Torque Car jack ratchet wrench rod is tightly connected with the plastic handle, which is firm and not easy to fall off. It adopts Head Reinforced Design,which is partly longer than the original.Jack ratchet wrench is forged with thickened steel and is heat treated as a whole.It has the characteristics of high hardness, high torque,good toughness and rust resistance.
• Applicable To Travel/Tire Replacement & Small Cars Like s.edans/Suvs/Vans Jack Wrench Jack ratchet wrench has a wide range of applications,and both men and women can easily use it.Jack wrench is suitable for small cars like S.edans, SUVs, Vans.(cars below 2T ), suitable for travel and tire replacement, and can help you quickly and easily replace tires and wheels.
• Positive And Reversal Knob Design & Easily Switch Rise And Fall & Easy To Use Scissor jack wrench is suitable for matching with a scissor jack,the design of the Positive and Reversal knobs allows you to adjust the direction of the knob by pulling the knob,Complete the rise or fall operation,which is easy to use and simple to operate.
• How To Use To raise load, firstly, you can insert the jack handle into the hole of the handle socket, then use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise. To lower load, similarly, you can insert the jack handle into the hole of the handle socket, then use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
• See more on Amazon...

Features

• Effective Compression Ring/Ferrule Puller Removal Tool Ferrule puller is a brass compression ring plumbing puller tool that is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches, suitable for a variety of plumbing applications, effectively removes rusted or damaged compression rings, ferrules (aka olives), and removes angle stop rings around pipes, as well as removing old shut-off valves under bathroom sinks, etc., saving pipes and making valve replacement easy.
• Easy to Operate & No Damage to The Pipe Olive puller removal tool is a reliable plumbing tool. It works by screwing the olive puller into the valve nut, then turn the handle, the ferrule puller applies constant and even pressure against pipe and the threaded compression, sliding the compressed ferrule toward the open end of the pipe without damaging the integrity of the pipe itself, and then fall off. It's safer to operate and won't cause further damage than tools like pliers or hack saws.
• Upgraded Model - Hexagonal Head Design Compared with most olive pullers on the market, the head of this olive puller adopts a hexagonal design, which can be used with a ratchet and a socket, and can also be installed with an power drill to drive the olive puller, the design provides great convenience for tight space situations or people with limited grip strength. Additionally, you can remove the included short handle and use a screwdriver or other longer rod to gain more leverage.
• Well Made & Compact Structure The design of the compression ring removal tool ensures precision and ease of use. It is made of high-quality solid brass with well-made threads, high strength/hardness, sturdy and durable, and has good corrosion and wear resistance. The olive puller features premium construction and compact size, and the handle and threads move freely without sticking or jamming. Small enough to hold in one hand, it works great even in very tight spaces.
• 3-Year Warranty Ferrule puller comes with a three-year warranty, it is a valuable addition to any plumber s tool kit and is an ideal tool for plumbers, mechanics, air conditioning repairmen and more. If there are any problems during use , welcome to contact us at any time. Warm Tip: Before use, put a few drops of mineral oil on the threads to make it easier and faster to remove the compression ring, while helping to reduce the stress on you and the olive puller.
• Warm reminder The threads on the ferrule puller are tapered pipe thread, which is not copatable for straight thread on compression fittings; The ferrule puller has a coarse thread, not a fine thread.
• See more on Amazon...

Features

• Multifunctional Injector Tester Fuel injector tester is equipped with both diagnostic and cleaning functions to help you diagnose injector problems such as sticking,leaking,clogged,damaged or burnt injector,and helps to identify good or bad injector with engine off.You can test both injectors individually or simultaneously,and can be used for standard EFI injectors (12V) as well as GDI injectors (5V),with reverse connection protection output short circuit protection and mode lock function etc.
• Four-Wire Dual Channel Design Fuel injector cleaner and tester is designed with a four-wire dual channel design and is equipped with two pairs of pulse output terminal test wires.Compared with the two-wire single channel design of injector cleaners on the market,our injector cleaner tester can not only test the single injector, but also support simultaneous testing of two injectors (new and old injectors can form a sharp contrast), which better helps you identify the condition of the injector.
• 4 Pulse Signal Output Modes & 8 High/Low Power Driving Modes Fuel injector cleaner kit has two output voltage levels and 4 pulse signal output modes(short/medium/long/continuous pulse mode),with the continuous pulse mode helping to identify good and bad injectors.In addition,fuel injection cleaner has high and low power drive modes,which can test injectors under various powers.Compared with the injector testers on the market that only have high power modes,the functions are more comprehensive.
• Output Short Circuit Protection & Power Input Reverse Connection Protection Function Automotive injector tester has a new output short circuit protection function.If the injector is damaged or the pulse output terminal is short-circuited,the power indicator will flash.Also,it can be used to determine whether the injector coil is short-circuited,it also includes a power input reverse connection protection function.In addition,it can be modified for relay testing or solenoid valve testing.
• Widely Applicable Fuel Injector Cleaner Tool Kit Fuel injector cleaner tool uses the 12V battery on the vehicle or an external DC 12V (recommended at least 1.5A) power adapter as the power supply, it can be used with any fuel pressure tester (Note : only for gasoline engines, not for diesel engines).In addition,the injector cleaning kit comes with 4 fuel injector cleaner adaptor for two different sized injector nozzles and can be used on almost all types of automotive and motorcycle injectors.
• See more on Amazon...

Features

• Evaporation/Condensation Pressure and Temp Test&High/Low-pressure Temperature Test HVAC Manifold The HVAC gauges could operate dual pressure and temperature test to help you determine refrigeration capacity of refrigeration system. The lower the pressure and temperature of the evaporation(Ev)/condensation(Co) are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do. It also could test the temperature of the refrigerant in the high/low-pressure pipes.
• Superheat and Subcooling Test&Pressure Leak Test When refrigerant type is set and temperature clamps are connected to air conditioning pipes, HVAC gauges automatically read the degree of Superheat(SH) and Subcooling(SC). The higher the degree of superheat, the smaller the opening of the expansion valve (the refrigerant filling is less) can be determined. Calculate the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking.
• Vacuum Pumping & Refrigerant Filling & Built-in 89 kinds of Refrigerant Database HVAC Manifold Digital manifold gauge set can connect refrigeration equipment and vacuum pump for vacuum pumping operation. Vacuum pumping can make it easier to fill the refrigerant into the pipeline. HVAC gauges is built-in 89 kinds of refrigerant pressure&temperature database. Before you fill refrigerant, you can set different types of working refrigerants according to the car needs to fill.
• Refrigerant Observation Window & Large LCD Digital Display & Multiple Unit Switching When filling the refrigerant, you can observe the filling status of the refrigerant through the visible window. Equipped with large LCD display, clear data display and easy to read. You also can switch multiple pressure units, including kPa, Mpa, bar, inHg, PSI, along with the temperature unit switch between Celsius/Fahrenheit.
• High Data Stability & Wide Application HVAC Gauge Built-in 32-bit digital processing unit and high-precision data acquisition unit make it have high data stability. It uses high-strength engineering plastics and a flexible non-slip silicone design, sturdy and durable. Digital refrigerant Gauge is an auxiliary instrument for the installation, testing and maintenance of refrigeration machines such as automobile air conditioner, household air conditioning, refrigeration equipment and cold storage.
• Non-slip Silicone Design & Hook Design & Refrigerant Hoses & Temperature Sensor Clamps Silicone non-slip design can prevent slip and fall so that you can easily work without gloves. Equipped with a hook that allows you to hang the gauge on the car without holding it all the time. Besides, it is equipped with refrigerant hoses and temperature sensor clamps for better use. Connect the temperature clamp to measure the temperature. The burst pressure of the hose set is 3000 PSI.
• How to Verify The Accuracy of The Temperature The temperature measured by the HVAC gauge is allowed to deviate by 3% from the actual temperature. There is a simple way to verify the accuracy of the temperature: Take out the black wire on the temperature clamp and put it in the boiling water. If the temperature is 100 degrees Celsius or the error is plus or minus 3%, it is normal.
• Note According to the current level of hardware processing in the industry, it is difficult to achieve a 100% completely sealed valve on the market. The sealing degree of our guage hardware can only reach 99%. But these slight leaks will not affect the use.
• Warmly Note Before using the HVAC guage, please make sure that refrigerant hoses and temperature sensor clamps are connected properly. Poor connection of the temperature sensor clamps will make it impossible to read the temperature. Poor connection of the refrigerant hoses will cause refrigerant leakage.
• See more on Amazon...

Features

• UNIVERSAL PIN EXTRACTOR TOOL SET ---23 piece Terminal EJector Kit Tool, suitable for a variety of manufacturers and models -American domestic, European and Japanese cars and trucks.
• GOOD HELPER FOR REMOVING BARBED TERMINALS --- not damage the vehicle wiring harness,long handle protect technician's hands, easily remove terminals from electrical connectors. Make your job easier and faster.
• STAINLESS STEEL PRECISION TIP AND NON-SLIP RUBBER HANDLE ---the tip is made of high-strength stainless steel for durability and will not bend or break when used in large quantities A few tips are made of manganese steel . Ergonomic rubber handle for comfortable use and non-slip.
• REPLACE EXPENSIVE KIT --- Avoid a dedicated kit that costs 10x and save time and money with this cost-effective Wire Terminal removal tool.
• HEAVY-DUTY CARRYING CASE ---packed in heavy duty blow molded suitcase for easy transportation and quick organization. Each handle is marked with a number on and next to it for quick reference to the chart.
• See more on Amazon...

Features

• 16 Specifications & Widely Applicable The brake caliper socket set contains 12 special sockets for different models, designed for removing/installing brake caliper screws, helping you to repair calipers or replace brake pads easily and efficiently. Brake caliper special sockets are suitable for disassembly of various models, compatible with BMW/A.udi/F.ord/V.olkswagen/M.ercedes-Benz/P.orsche and other models, which is very widely used.
• 3Pcs 10PT Sockets & 2Pcs 7PT Sockets & 2Pcs 5PT Sockets 3*10PT sockets: 11.5mm, 15mm, 20mm (Compatible with Volkswagen/A.udi/Porsche); 2*7PT sockets: 14mm, 22mm (Compatible with Volkswagen/A.udi/P.orsche); 2*5PT sleeve: 14mm, 19mm (Compatible with Ford/M.azda/P.eugeot/C.itroen)
• 6Pcs Hex Sockets & 3Pcs Spline Sockets 3Pcs hex sockets: H7, H9, H11 (Compatible with Mercedes-Benz/B.MW/F.ord); 3Pcs hex sockets: H14, H17, H19; 3Pcs spline sockets: M14 (Compatible with Volkswagen/A.udi/P.orsche), M18 (Compatible with Volkswagen/A.udi), 10PT-14.
• Anti-Rust & High Hardness & Precision Design Brake caliper socket set is made of high-quality CR-MO chromium-molybdenum steel, which has the characteristics of high hardness, high torque, not easy to break, and the surface has a corrosion-resistant manganese phosphate coating , rust-proof and oil-resistant. Brake caliper socket feature precision-milled bit ends to ensure a snug fit on the caliper, avoiding mismatches and reducing the risk of slipping or damage.
• Easy to Identify & Can Be Used with a Variety of Tools Brake caliper socket set are engraved with specifications and models,, which is highly identifiable and helps users quickly and accurately find the right sockets. Brake caliper removal tool kit has a 1/2 (12.5MM) square driver, which can be used with ratchet wrenches, electric wrenches, torque wrenches, bent rods, etc. It is also designed with a fixing groove to firmly hold tools such as ratchet wrenches to prevent them from falling off.
• See more on Amazon...

Features

• Dual Hole Testing & Protective Cover Protection Spark plug tester has two spark plug socket,it can test two spark plugs (good spark plug & bad spark plug) at the same time.By comparing the spark intensities of the two spark plugs,judge the performance and ignition intensity of the spark plugs,and replace the broken spark plugs in time.The design of the protective cover can prevent you from the risk of electric shock during the test,which effectively guarantees your safety during the operation.
• 0~6000rpm Working Frequency Adjustable & More Accurate Data The automotive tools has a wide adjustment range of working frequency.By operating the rotary switch,you can adjust the working frequency in the range of 0~6000rpm,the higher the set frequency,the stronger the spark intensity.Spark plug tester can also simulate the work of the engine,restore the authenticity of the car rotate speed,save time and high efficiency,and the data is more accurate,which can better test the spark plug.
• High-Quality ABS Material With Impact Resistance & Heat Resistance Ignition tester is made of high-quality ABS material,which has the characteristics of impact resistance and heat resistance.It can provide you with long-term service and reduce the cost caused by frequent tool replacement.
• Plug And Play & Intuitively Display Spark Plug Status Spark tester automotive is easy to operate, and you can start using it after connecting the adapter. The spark plug tester comes with a power supply/high voltage indicator light, which can help you observe the state of the spark plug more intuitively.
• Widely Used In 12V Gasoline Vehicles Car Spark Plugs Spark tester is widely used, and can be used to test 12V gasoline vehicles car spark plugs, suitable for 14MM and 16MM spark plugs. It is compatible with all spark plug tests for crankshaft engines and motorcycles on the market.
• Note Spark plugs tester is a high voltage detector.Please do not touch the spark plug during the test to prevent the risk of electric shock.
• See more on Amazon...

Features

• More Choices 3", 4", 6", 8" Sizes Bearing puller kit includes 3", 4", 6", and 8" four puller sizes, which are generally more comprehensive than commercially available gear pullers and can be used for different removal scenarios, covering most applications.Bearing puller set is available in 2 and 3 jaw types for removing gears, hubs, ball races, bearings, pulleys and sprockets, and can also be used for flywheels on small engines such as outboards, lawn mowers, etc.
• Disassembly Without Damage Gear puller set can be used with hand spanner, ratchet or combination spanner to easily remove rusted or damaged parts without damage. The gear puller has a reinforced jaw end and the jaws with adequate depth to hold your component securely and distribute even pulling force to avoid damaging your component. In addition, swivel thrust plates on the larger sizes prevents damage to shaft ends.
• Reversible Jaws & Dual Hole Adjustable Design Gear puller set contains a 2 or 3 legged tool suitable for the application,with universal and reversible jaws,you can pull the part from the inside or the outside and both are designed with dual fixing holes that not only create a strong link between the jaws and the forcing bar,but also provide short or long reach.You can adjust the double holes according to the usage,flexible to use, easy to enter and grab even in a narrow space.
• Excellent Material The reversible Jaws of the gear puller are made of forged chrome vanadium steel,which is hard,strong and wear-resistant,and can withstand high strength pressure without deformation or breakage,and has a long service life. The metal clips of the gear puller is made of zinc-coated Iron, which is strong and durable and resistant to corrosion. The threaded central forcing bar is coated with black oxide,which can effectively prevent rusting and is highly resistant to rust.
• Easy Storage & Packaging Details Gear bearing puller removal tool comes with a high-quality heavy-duty carrying case, you can put the tools in the case in an orderly manner after each use, preventing loss and mess, and it is easy to carry.Bearing puller set package includes: 4pcs Hexagonal Opposite Screw Rods 4pcs Triangular Screw Rod Holders 4pcs Two Corner Screw Rod Holders; 12pcs Leg Puller 24pcs Nuts; 24pcs Bolts; 24pcs Metal Clips.
• See more on Amazon...

Features

• Repair/Restore Damaged Axle Threads & Clean Threads Thread chaser set is designed for cleaning or repairing threads, including spindle thread, axle studs and wheel stud threads, etc, best for cleaning up threads or chasing slightly damaged threads, and can effectively cleans rust and dirt from threads and restores clear thread lines. Compared to thread files, this kit is faster to repair axle threads, which is an excellent helper for those who are repairing some very old or stubborn axles.
• More Choices - 8 Common Dies Sizes Thread chaser set includes 6 metric and 2 SAE thread restorers: M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25 , M20 x 1.50, 13/16 x 20UNF, 3/4 x 20UNF, suitable for a variety of thread specifications. Each die adopts a special thread design with vertical grooves that run across the radial threads. During the cleaning and repairing thread process, these grooves can effectively discharge gunk and remove rust, providing better re-threading results.
• Anti-Rust & High Hardness & Easy to Identify The 8 dies of the thread chaser kit are made of high-quality CR-MO chromium-molybdenum steel,which has the characteristics of high hardness,large torque,not easy to break, and the surface is treated with anti-oxidation coating, which is rust-proof and oil-resistant. All dies and the inside of the box are engraved with specifications and models, which are highly identifiable and can help users find the right die quickly and accurately.
• Comes with 1/2 Square Extension Socket Driver & Easy to Use Thread repair kit comes with a 27mm deep-well socket, its tapered design allows you to apply pressure to the die, while the depth of the socket allows you to run the die all the way down the threads. Install the threaded die into the fixture and tighten the screws with the help of an Allen wrench. Then you can use a 1/2 ratchet or a 1-1/16 Hex wrench to drive the sleeve. It is easy to operate and saves you a lot of time and energy.
• Package Details We provide a one-year warranty for this thread repair kit, which contains 8 thread restorers, a 27mm extension rod, an allen wrench, and a high-quality blow molding box. If you have any questions during use, please feel free to contact us at any time.
• See more on Amazon...

Features

• OBD-16 pin interface & Widely Applicable The OBD2 extension cable adopts a 16-pin interface design, strictly in accordance with international standards, which makes the product applicable to a wide range. It is suitable for any car model with OBD interface, and most of the market The OBD2 diagnostic interface for gasoline and diesel vehicles is fully compatible.
• Pure Copper Core Production/Double-Row Socket Design Fast And Stable Data Transmission The OBDII enhanced male-to-female extension cord is made of pure copper core,and the high-purity oxygen-free copper core accelerates conductive transmission,which can help car owners obtain data faster. In addition,the design of the double-row socket structure makes the transmission more stable and the product more durable.
• Insulation & Anti-Leakage & Anti-Aging ODB2 extension cable is made of a new type of nylon material,which is soft and can not only be bent at will, but also gives OBD2 cable insulation and leak-proof characteristics.In addition,because the hose in the cable uses TPE material,makes the OBD2 cable has excellent anti-aging function.
• Anti-Tear & Anti-Scalding & Waterproof Thickened wire core is used inside obd2 extension cable,makes the OBD2 cable has strong tensile strength, you don't have to worry about tearing. And the outer covering layer of reinforced nylon wire has the characteristics of high temperature resistance and anti-scalding,which can protect your safety during use. In addition, the nylon material used in the OBD2 cable is waterproof, which further improves the service life of the product.
• Nylon Protective Sleeve & Not Easy To Crack OBD2 to usb cable is covered with a high-quality nylon protective sleeve, which can effectively protect the copper wire in the wire, together with the environmentally friendly soft rubber thickened shell to provides double protection for the copper wire. OBD2 wire has a thickened diameter of 10mm,compared with the ordinary OBD cable, the nylon OBD2 cable is less prone to cracking and more durable.
• See more on Amazon...

Features

• 1.[Coolant Reservoir Tank For Car Engine Maintenance]: Coolant overflow tank is multi-functional, it collects the coolant/water overflowing from the radiator so that the coolant loss is reduced, while balancing the tank pressure and allowing the engine to maintain normal working temperature under various conditions.In addition, it can remove carbon deposits and accumulated sludge from some of the car's systems, thereby extending the life of the engine and improving its performance.
• 2.[ Radiator Rreservoir Tank With Simple Working Principle ]When the pressure of the coolant in the radiator exceeds the set value of the pressure cover, the coolant is sealed by the pressure cover and flows into the radiator coolant overflow tank through the overflow pipe.
• 3.[ Coolant Overflow Tank With A Wide Range Of Applications ]: The coolant reservoir is highly compatible and compatible with most cars. Please make sure that your vehicle has enough space to install it before buying.
• 4.[ High-quality and easy-to-install Coolant Reservoir Tank ]: The coolant overflow tank is made of aluminum and is very durable. It can also prevent your car's cooling system from rusting. The design of the water tank is simple and easy for you to install. The transparent hose that comes with the coolant reservoir tank can visualize the liquid level in the radiator reservoir tank and let you know when to empty the water collection tank.Thread Size is ORB-6.
• 5.[ Large Capacity & Accurately Designed Radiator Expansion Tank ]: The capacity of the coolant overflow tank is 2L, which is twice that of the ordinary 1L coolant reservoir. It can greatly improve the storage capacity and reduce your cleaning times. The outside diameter of the screw-in hose barb inlet is 12 mm. The bottom and side drain holes are 9/16-18UNF (6AN ports), and the inner diameter of the neck filled with CNC billet aluminum is 36 mm. The wall thickness is 3 mm.
• See more on Amazon...

Features

• Smaller Welding Spots & Stronger Welding Dent puller welder is specially designed for repairing various dents on the car body (only for iron material).It adopts intelligent induction welding technology, the welding joints are extremely small,with low consumables consumption and no damage to the back metal coating or paint surface.Built-in E-type high-frequency transformer,3800A super-large current output, stable output,which makes the welding stronger.Single-sided welding thickness: 0.6-1.5mm.
• Multifunction- Welding/Puller Function Spot welder dent puller is equipped with welding tongs and pullers, as well as a variety of welding accessories, etc.,with super high configuration. Through the welding tongs and puller, you can operate two functions of welding and pulling, which can helpe you reduce the time and energy for switching welding tongs and improve work efficiency. Dent puller welder are widely used in sheet metal repair, dent forming, body damage and other repair work.
• 6 Welding Modes & Auto/Manual Welding Spot welder dent puller adopts a new generation of microcomputer program control,which greatly improves the welding range and welding accuracy.6 welding modes are available,including Triangular meson pull,Round meson pull,OT meson pull,Wave line welding,Carbon rod to close the fire,Single-sided spot welding.Stud welder dent repair kit has auto welding and manual welding two modes can be switched at any time, easy to operate.
• Overheat Protection & Efficient Cooling Dent puller has an overheat protection function, if it is overused, the high temperature alarm indicator will light up and the machine will stop working. When the transformer cools down, the alarm indicator will automatically go out and the machine will resume normal operation. Built-in high-efficiency radiator and the ventilation holes on the side of the body can help the machine dissipate heat quickly to meet your needs for long-term continuous work.
• Cold-Rolled Steel Body & Pure Copper Core Input/Output Cable The body of the spot welder dent puller is made of high-quality cold-rolled steel, which has high strength/hardness, sturdy and durable, and has good wear resistance and corrosion resistance.The input/output cable of the dent puller welder are made of international pure copper welding wire, which is soft and not easy to break, not only generates little heat, but also saves energy and saves power.
• See more on Amazon...

Features

• Quickly Detect/adjust ignition timing Light Timing light automotive is specially designed to detect the ignition timing scale on the engine flywheel or pulley. When the timing changes due to ignition system failure or changes in car components, the timing can be reset/adjusted by the flash on the timing light. Able to detect the automotive knock suppression control system and vacuum advance angle control system, and change the advance angle as the speed changes.
• Wide Application Timing lights is designed to re-timing your car's ignition so that your car has higher fuel efficiency to produce more power. Engine timing light is suitable for cars, motorcycles, boats and all two-stroke or four-stroke gasoline engines. Its working voltage is 12V and you can be easily operated on a 12V ignition system.
• High Impact ABS Shell & Strong Flash Timing light shell is made of high-quality ABS material, which has good impact resistance and wear resistance and can withstand daily use. Ignition timing light use special bulbs that are much brighter than ordinary bulbs and can produce a very strong flash. The timing light not only has bright light, but also has a large illumination area, making it easy to observe the timing marks on the engine under strong light or during the day.
• Positive/ Negative Power Clip & High Voltage Wire induction clamp The power clip of the timing lights has a strong bite and holds firmly, and the wires connected to the power clip can be torn apart separately to expand the range of movement. In addition, the wires are wrapped in insulating rubber to prevent accidental leakage/electric shock. The high-voltage wire induction clamp is a slide-open style, which allows for an easier and safer connection than pinch-open induction clamp.
• 4.5ft Lead Length & Anti-Slip Handle Automotive timing light has a long enough lead to reach other engine parts, saying goodbye to the trouble of limited range of movement caused by too short wires, and also helps you see the timing marks clearly. The ergonomically designed handle of the timing light automotive is comfortable and lightweight, weighing only 0.4kg, and can be grasped with one hand, making it easy and convenient to operate.
• Multiple Protection Functions Timing lights has reverse polarity protection and overload protection functions, which effectively protects the battery and equipment safety during operation. Timing light is easy to operate, firstly connect the power clip to the 12V power supply, the red clip connects to the positive terminal and the black clip connects to the negative terminal, then connect the high pressure wire induction clamp to the high pressure wire of the cylinder to work normally.
• See more on Amazon...

Features

• New Quick Tubing Straightener Tubing straightener is suitable for brake and fuel line, which can quickly straighten bent or coiled lines in brake or fuel systems for you.Unlike bench mounted tubing straighteners or manual tube straightening methods,tubing straightener costs less than bench mounted tubing straighteners,straightens faster,and better straightening effect than manual tube straightening.Tube straightener also avoids unnecessary bends and irregularities,providing better flow for your lines.
• Suitable For Tubing With 3/16 Inch Outer Diameter Size Brake line straightening tool can be used to straighten tubing with an outer diameter of 3/16 inch,widely applicable to various metal tube,such as steel,stainless steel,copper and aluminum tube,etc.It is a fast,simple and practical tube straightening tool.
• Easy To Operate & Time Saving Handheld Tube Straightener Tube straightening tool is easy to operate,after inserting the start of the tubing into the straightener,you can easily straighten the tubing by simply sliding it back and forth.And the built-in 4 sets of precisely aligned rollers provide better fluid flow for straightening bent and coiled tubing with professional grade straightening results.With this tool you can easily index and measure all your tubing lines, saving you time and effort.
• Rust And Wear Resistant Pipe Straightening Tool Pipe straightening tool is well made and stable,made of high quality metal material with high hardness and strength,with durable metal structure and good rust and oxidation resistance.In addition,the casing is made of nylon reinforced plastic with good wear and high temperature resistance,which is not easy to age/damage and can provide you with a long service life.
• Ergonomic Design & Excellent Grip The ergonomic design of the 3/16in tubing straightener fits perfectly in the palm of your hand,and the nylon-reinforced plastic housing provides a good grip on your hand,making it easy to use even in tight spaces,such as inside an engine,helping you to complete straightening work with ease.
• See more on Amazon...

Features

• Professional Diagnosis of Exhaust Blockage Fault Exhaust back pressure gauge tester is designed to diagnose where back pressure problems in the exhaust system lie,easily helping you diagnose whether your converter or muffler is clogged,preventing engine sluggish performance,reduced acceleration and overheating,providing you with a smooth and safe drive.Exhaust back pressure tester provides an effective way for car experts,car dealers or DIY mechanics to determine faults accurately and quickly.
• Simple And Practical Exhaust Back Pressure Gauge Kit Exhaust pressure tester is tested at idle speed and 2500 rpm.At idle,read the lower scale on the gauge.It should not over 1.25PSI (0.09bar),or be in the red zone.If it is,stop the engine and find the location of the blockage and repair and unblock it.If the reading at idle is not red zone on the lower scale,rev-up the engine to 2500 RPM.If the reading is in red zone 3PSI,(.21bar) there is is a blockage in the exhaust system.
• HD Dual Scale Pressure Gauge & Shockproof rubber Cover Equipped with a 2.5 HD pressure gauge designed with high visibility PSI/Bar pressure units to help users read test data quickly and accurately.In addition,the multi-coloured bars are designed to help you quickly determine if there is a problem with the exhaust system (green is a good condition,red is a bad condition) The gauge head is equipped with an anti-vibration rubber protective cover for real-time protection,reducing crash damage.
• 6ft abrasion/heat resistant hose & M12 and M18 thread adapters Exhaust back pressure tester hose length is made of high quality silicone material with good abrasion and high temperature resistance ( 300 C) and the 6ft hose length allows the user to test directly from the driver's seat, making it easy and fast.In addition,complete with M12 and M18 thread adapters,you can connect the exhaust pressure gauge tester to the exhaust system port.
• 3 years warranty&Warm Tips Instrument is provided with 3 years free warranty,if you have any questions during the use,please feel free to contact us,we will definitely reply you in time.To ensure accurate test results,the pressure gauge has been checked and calibrated.If the pressure gauge pointer is not at the initial state 0,it may have been affected during transportation.You can manually remove the cover and adjust the pointer to 0,this will not affect the accuracy of the test results.
• See more on Amazon...

Features

• [Material]:Made of 304 Stainless Steel .Stainless steel elbows that are resistant to high temperatures, oxidation, and rust
• [Wall Thickness]: 18GA/0.047(1.2mm)
• [OD]: 3/76mm The outer diameter of the elbow is 3
• [Curvature Radius]:1.27D/3.8
• [Quantity]:1PC 3 inch 90 degree exhaust elbow
• See more on Amazon...

Features

• Obd2 16-Pin Socket & Widely Applicable The interface of OBD2 extension cable adopts the international standard OBD2 16 pin socket,which is compatible with 16 pin plug,compatible with all automotive standard OBD protocol diagnostic interfaces,and is widely used.It is applicable to any vehicle model with OBD2 interface.
• Multiple Equipment Connection & Fast/Stable Data Transmission OBD2 splitter has two adapter connectors,users can connect two kinds of automobile detection equipment at the same time.Due to the pure copper core inside the OBD2 cable,the data transmission of the equipment is stable and the data transmission speed is faster.
• High Temperature Resistance & Anti-Aging & Waterproof The reinforced nylon material covered by the obdii splitter not only has the characteristics of insulation and Leakproof,but also has the function of waterproof and high temperature resistance.At the same time,the TPE material is used to make the cable anti-aging,durable and can provide you with long-term services.
• Insulation & Leak Proof & Good Flexibility the exterior of obd2 Adapter is made of reinforced nylon material and new TPT material,which not only insulation and leakage proof,but also gives the cable good flexibility and can be bent freely for easy use.The nylon protective sleeve covered on the outside of the obd2 Adapter,which is environmental and high quality,together with the environmentally friendly soft rubber thickened shell to protect the copper wire inside the cable.
• Thickened Diameter & Not Easy To Crack OBD2 cable made of reinforced nylon has the advantage of 10mm thickened diameter.Compared with ordinary OBD cable,the design of 10mm thickened diameter makes the cable not easy to cracking,and OBD2 extension cable has gone through 8 inspection steps from injection molding to molding to ensure that the cable can be inserted more than 10000 times.
• See more on Amazon...

Features

• Checking/Locating Turbo System Leaks Turbo boost leak tester kit is specially designed for checking turbo system leaks or cooling system pipes. By charging your turbo system with low-pressure air to help you check and locate leaks on the turbo system of various vehicles. As well as being able to be used on turbos, boost leak tester can be used wherever adapters can be fitted, for example, you can also perform exhaust leakage testing, etc., which has a wide range of applications.
• Simple Operation & Easy Troubleshooting Turbo boost leak tester is simple to operate and can be used with an air compressor with a storage tank. Plug the output side of the turbo and the intake inlet with the plugs, then use the regulator to connect the plugs and the air compressor, and pressurize the turbo system. After pressurization, you can see whether the guage maintains the pressure and is accompanied by the sound of a leak.(If you can't find the source of the leak,use the leakage spray)
• Wide Range of Applicability - 12 Hose Installation Sizes Turbo system leakage tester set comes with 4 pairs of stepped adapters, made of high-quality hard nylon plastic, used to plug the intake and exhaust pipes. Each adapter is designed with 3 steps to fit most common boost hose/tube sizes, works on hoses with a diameter of 35/40/45/50/55/60/65/70/75/80/85/90mm and hold in place well and seals tightly to help you detect and locate various sizes of leaks.
• Pressure Gauge with Shut-off Valve and Regulator Leak down tester comes with a 0-6bar(0-87psi) HD pressure gauge, which allows you to observe the pressure inside the hose at any time to prevent overpressure. Comes with a regulator that allows you to adjust the pressure on the system you want to test.Red manual valve is used to open or close the air pressure.If the pressure is too high, you can reduce the air pressure by pulling the valve (automatically relieves pressure when it exceeds 2.5Bar)
• Packaging Details We provide 1 year warranty for the turbo boost leak tester set. Boost leak tester kit includes: A Pressure gauge; A shut off ball valve; A air coupler; A 1/4-inch European air inlet; 4 pairs of stepped adaptors (35mm - 90mm);A carrying case; A user manual. Note: It is best to use it with an air compressor with an air tank; to prevent damage to engine components, do not overpressurize.
• See more on Amazon...

Features

• Multifunctional Non-Contact Phase Sequence Detector The 3 phase tester is designed to detect the three-phase sequence in motor installation and maintenance, which is fast, simple and accurate. It has multi-functions such as phase sequence inspection, phaseloss judgment, short circuit search, voltage detection, live wire inspection, motor steering detection, etc. It is small in size and light in weight, and is a good helper for easy motor detection.
• Non-Contact Inductive Measurement The 3 phase rotation tester is different from the traditional phase sequence detection method,it adopts a clamp-shaped non-contact inductive measurement,and no need to open the wire, just clamp the three super-induction and high-insulation clamps on the insulation sheath of the three-phase live wire to detect the phase sequence,avoiding contact with the high-voltage bare live wire, which greatly improves the personal safety of the operator.
• Phase Sequence/Phaseloss Detection The non-contact phase sequence detector can detect the phase sequence status (positive phase sequence/negative phase sequence) of the three-phase power supply and judge the phaseloss. When the A, B and C phase indicators are all on, the R indicator light is on to indicate positive phase, the L indicator light is on for negative phase, and when any of the three phases is missing, the corresponding indicator light is not on.
• Live Wire Inspection & Line Maintenance The non-contact phase meter can detect whether the wire is live, clamp any one of the three-color induction clamps to the wire to be detected, if the wire under test is energized (in the live wire voltage setting Within the range of AC70~600V), the corresponding A, B, C phase indicator lights will be on. On the contrary, if the tested wire is lack of power, the A, B, and C phase indicator lights will not be on.
• Motor Steering Detection & Short Circuit Search The motor rotation indicator can detect the steering of the motor. Just place the meter on the motor and parallel to the motor rotation axis to test the steering of the motor. In addition, the phase meter can also judge whether there is a fault in the line, and quickly find the location of the disconnection, thus helping you to repair the line quickly and easily.
• Auto Shutdown Protection & Equipped With Easy-To-Carry Carrying Bag When the non-contact phase sequence detector is in idle state,the instrument will automatically shut down (automatically shut down after 5 minutes of no operation) to save power for you and prolong the life of the battery. In addition,the phase sequence detector is equipped with a high-quality black handbag,which can be put into the handbag after use,which is convenient for carrying and storage.
• See more on Amazon...

Features

• Simple Operation & Efficient Cleaning Fuel injector cleaner is fit for all petrol cars and is designed to remove carbon deposits and maintain the pipeline. It has high and low pressure cleaning function, which can be used to clean the whole fuel system, intake system and TWC converter, about 20 minutes to completely remove carbon deposits. It is easy to operate and is a no-disassembly cleaning tool, which can be used to clean the fuel system without disassembly,saving a lot of time and energy.
• 1000ML Large Capacity Cleaner canister & 0-150PSI Adjustable Pressure Gauge Fuel injector tester adopts a stainless steel bottle, which is anti-scratch, wear-resistant and corrosion-resistant, and adopts a downward oil discharge design, which ensures no residue during cleaning and does not corrode the cleaning equipment.The high-precision pressure gauge can clearly display the air/oil pressure, and is equipped with a pressure regulating valve to adjust the pressure to prevent bottle explosion.
• Automatic Pressure Relief & Multi-Function Valve Fuel injector cleaning kit comes with a pressure relief valve, which will automatically release the pressure when the pressure in the bottle reaches 150 PSI, the whole cleaning process is safe and reliable. Fuel injector cleaner tester is designed with a special handling check valve for adding liquid and releasing gas, which has good airtightness.
• More Humanization Design The stainless steel oil storage bottle is designed with a portable hook,which can be hung in the car to free your hands;The shell of the pressure gauge is covered with a shockproof rubber protective sleeve,which is shockproof,drop-resistant and high pressure-resistant,and deflation can be repeated up to 10,000 times;Equipped with a heavy blow molded plastic box,which is convenient to store and easy to carry,and can withstand high-strength extrusion without deformation.
• Ultra-high Configuration & Wide Application Fuel injector cleaning kit contains 40 accessories, including a 40 long oil outlet pipe (For all cleaning fluids), which helps you to realize ultra-long-distance connection.With a complete range of joints, mainly made of stainless steel and engineering plastics, which is one of the most complete joints on the market at the moment, and it's suitable for almost all cars and light trucks in the European Union, Asia, and the Americas. light trucks.
• See more on Amazon...

Features

• Widely Applicable Wiper arm puller compatible with a.udi A3, A4, A5, A6, Q7. Compatible with V.W Lupo/P.olo/T.ouareg.Compatible with H.onda/J.azz/C.RV/F.RV and others.Compatible with O.pel Astra G/Z.aphira B/C.orsa C/V.ectra C.
• Widely Applicable Wiper arm removal tool is also compatible with V.W Golf/P.assat until 2005. Compatible with B.MW 5 series E39 and 7 series E38 until 2005. Compatible with F.ord G.alaxy S.eat A.lhambra M.ercedes A and B class from 2005. Compatible with P.orsche C.ayenne and other SUV.
• Remove Car Wiper/Battery Windshield wiper arm removal tool is mainly used for car wiper arm removal and replacement. It can easily remove and replace some tight wiper arms. puller tool is not only easy to use, but also will not damage the glass, wipers,shaft and will not scratch the paint, etc.,which is a good helper for professional disassembly of the wiper arm. In addition,wiper arm puller can also remove the battery terminal clips without damaging the battery poles.
• Strong Structure & Creative Design Windshield wiper arm removal tool has a sturdy construction and high thread precision,it's made of high-hardness metal, it's sturdy and durable, giving you the perfect pull to get the job done.In addition,the main shaft end is designed with a brass cover,which can effectively prevent damage to the windshield wiper arm,which is a good helper for auto maintenance workers.
• Easy To Store & Carry Equipped with a heavy duty high quality blow molding box, it can be neatly and orderly placed in the box after each use, not only easy to carry, but also prevents tools from being lost and messy.
• See more on Amazon...

Features

• Digital Manifold Gauge Set Manifold gauge kits are used to install, test and maintain refrigeration equipment (such as air conditioners, refrigerators and cold storage, etc.). Digital gauge has very powerful functions, such as: double pressure test, dual temperature test , digital readout, multi-unit switching, multi-mode function and built-in refrigerant database.
• Condensing Pressure&Temp Test of manifold Gauge The air pressure gauge can test the minimum pressure when the refrigerant changes from gas to liquid, and the maximum temp when the gas changes to liquid. (The lower the pressure and temp of condensation are, the higher the efficiency of the refrigeration cycle and the greater the refrigerant capacity will do.)
• Evaporation pressure and temperature test of manifold Gauge The air pressure gauge can test the maximum pressure when the refrigerant changes from liquid to gas. The lowest temp when the liquid becomes gaseous. The lower the pressure and temp of the evaporation are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do.
• The air pressure gauge can be filled with refrigerant through the visual window & Refrigerant type can be set Built-in 89 kinds of Refrigerant Database. Before filling the refrigerant, you can set different types of working refrigerants according to the filling requirements of the car. When filling the refrigerant, you can observe the filling state of the refrigerant through the visible window.
• High/Low-pressure temperature test & Pressure leakage test for HVAC tools The hvac gauges can test the temperature of the digital refrigeration manifold in the high-pressure/low-pressure pipeline of the air-conditioning system. Pressure leakage test: Calculate the pressure difference between the initial test pressure and the second test pressure to determine whether the refrigerant leaks.
• Built-in 32-bit digital processing and acquisition unit & Large LCD Digital Display Built-in 32-bit digital processing unit and high-precision data acquisition unit, high data and stability. It also has a large-size liquid crystal display, supports LCD backlight, data display is clear and easy to read, and convenient to view various test data.
• Refrigeration Digital Manifold Gauge The Air Pressure Gauge uses high-strength engineering plastics and flexible non-slip silicone design and hook design, with Air Hose Manifold, Hose Clamp Set, Toolbox, easy to test and carry. Long-life valve switch, 1/4-inch standard interface design to ensure that the manifold Gauge durability, portability and versatility.The manometer for the installation, testing and maintenance of refrigeration equipment such as air conditioners,fridge and cold storage.
• Automatic multi-unit switching of pressure gauge Manifold Gauge has automatic multi-unit pressure conversion, Celsius/Fahrenheit temperature automatic conversion, including kPa, Mpa, bar, inHg, PSI, and temperature unit switching, which can meet the different needs of various tests. The hvac tools can also test the percentage of vacuum measurement and the leak time rate record.
• NOTE The battery is not included in the package It is normal that the test data and the actual data have an error within 3%. It is necessary to consider various factors such as the test environment and ensure the normal connection of the test line.
• See more on Amazon...

Features

• Air Brake Spring Tool It is safer and easier to replace the heavy duty tractors and trailers brake shoes, without the need for screwdrivers or tool pliers to remove the brake shoes.
• Brake Spring Tool is Easy to Operate Just hook the tab to the fixed spring ring, press the bar end down on the shaft, hold the handle and push it down and inward until the spring ring is firmly fixed on the brake shoe.
• Principle of Use of Spring Tools The end of this spring tool is in a v-shaped structure, which effectively utilizes the principle of leverage and is against the axle to separate the spring ring from the brake shoe more safely and easily.
• Brake Adjustment Tool is Made of High-quality Steel Brake adjustment tool is made of high-quality steel, with excellent wear and corrosion resistance, can provide you with long-term service.
• Note This tool is used for heavy machinery vehicles such as tractors and trailers. Pay attention to safety during operation and use.
• See more on Amazon...

Features

• 12 Pieces Brake Master Cylinder Adapter Kit with Quick Connectors Compared with most master cylinder bleeder kit on the market, our master cylinder bleeder kit adds a Japanese quick connector for wider applicability and better connection between the adapter and air hose. The kit also includes two rectangular adapters and 10 round adapters which can be used with brake fluid bleeder and brake fluid changer, which can help you to easily remove the fluid and refill the fluid into the whole brake.
• 2 Rectangular Adapters & 10 Round Adapters Specifications Brake master cylinder bleeder kit contains two rectangular adapters, one compatible with Chrysler/G.M vehicles, one compatible with Toyota/L.exus vehicles. The ten round adapters have the following internal diameter sizes: 29mm, 34.5mm, 42mm, 43.5mm, 47mm, 49.5mm, 50.7mm, 56mm, and 74mm. The variety of sizes allows you to make a precise and secure connection between the adapter and the brake fluid bleeders.(Note: Manual measurement, ther
• Widely Applicable The 12pcs brake bleeder adapter for near all domestic and import cars, such as compatible with Honda/C.hrysler/D.odge/J.eep/B.uick/C.adillac/C.hevrolet/N.issan/T.oyota/L.exus, etc,the applicability is very wide, providing you with more choices.
• Corrosion Resistant & good airtightness The pressure brake bleeder adapters is made of high-quality PPC material, which is extremely durable, not easy to break or deform, and has good airtightness, which prevents leakage when you replace and fill the fluid for the brake system. The surface of the aluminum alloy adapter is chrome-plated and blue aluminum oxidation treatment to improve the strength and hardness, and at the same time endow it with good oxidation resistance and corrosion resistance
• Humanized Design - Easy to Carry/Organize Brake master cylinder bleeder kit comes with a high-quality heavy-duty plastic case, and the handle design allows you to easily take it from one place to another. In addition, the master cylinder bleeder kit has the code of each adapter printed inside, so you can quickly organise it according to the code after each use, and at the same time, you can quickly find a suitable adapter according to the codes.
• See more on Amazon...

Features

• Used For Axle Threads Repair/Cleaning/Rethreading Tool Set Axle spindle rethreading tool set can be used to repair/clean the axle threads on the spindle, effectively clean the rust and dirt on the thread, repair the worn thread,and recover the clear thread line. It is the best tool for cleaning axle threads.
• Suitable For a Variety Of Thread Specifications & Wide Range Of Applications Threading tools are suitable for a variety of thread specifications, including axle threads on the spindles of eight common dies sizes:M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.50, 13/16 x 20UNF, 3/4 x 20UNF, and widely applicable, suitable for most vehicles.
• Can Be Used With 1-1/4 Socket Or Wrench & High-Strength/Durable High-Quality Steel Material Thread restorer mechanic tool sets can be used with 1-1/4 socket or wrench to help better repair/clean shaft threads ,save time and energy. Made of high-quality steel, with high strength and durability, it can provide long-term service and reduce the cost of frequent tool replacement.(package does not contain 1-1/4 socket or wrench. )
• Easy To Carry/Store Thread restorer kit is packed in a high-quality plastic box, you can easily take it anywhere, and it is easy to store, and it can be neatly placed in the box after each use, so you don t worry about losing.Convenient and easy to use.
• Note This tool can be used with a 1-1/4 socket or wrench, but the package does not include a 1-1/4 socket or wrench.
• See more on Amazon...

Features

• 1.[ Voltage Tester For Car For Circuit Fault Detection And Maintenance ]: This dc power tester is mainly used for low-voltage circuit fault detection and maintenance. It is mainly used for the testing of automotive circuits. It cannot be used for testing household circuits.
• 2.[ Low Voltage Circuit Tester For 6V V V DC Voltage ]: The DC voltage test range of this circuit tester is mainly low voltage of 6v v v. NOTE: The tester cannot be used for AC voltage.
• 3.[ Hook Probe Electrical Tester ]: The voltage tester has a unique hook probe design. Users only need one hand to find and fix the circuit under test more conveniently. Just gently pull the handle, you can use the probe to pierce the insulation and touch the copper wire. This makes the detection more convenient and faster. NOTE: Please do not use this tester to test a thick wire, so as not to be unable to test and lead to inaccurate test results.
• 4.[ DC Tester With Light ]: This automotive voltage tester has a test light, which allows the user to clearly know the result of the test.
• 5.[ Circuit tester With Retractable Handle ]: You only need to stretch the handle of the tester. Therefore, it can be used to test the on-off function of metal parts in contact with automobile components and penetration of larger lines.
• See more on Amazon...

Features

• Multi-Function Intelligent Digital Manifold Gauge Set Our digital HVAC manifold gauge set is versatile and has features such as refrigerant filling, dual pressure testing, vacuuming, air tightness testing, multi-unit switching, multi-mode functions, and built-in refrigerant database, suitable for air-conditioning installation and maintenance, daily maintenance of refrigerators, daily inspection of cold storage and automobile air-conditioning maintenance, etc.
• Built-In 92 Types Of Refrigerant Data & 32-Bit Digital Processing Unit Digital gauges hvac built-in 92 kinds of refrigerant pressure-evaporation temperature database, and you can switch or fill different types of refrigerants as needed, which is suitable for a variety of maintenance occasion. Built-in 32-bit digital processing unit and high-precision data acquisition unit, with high data and high stability characteristics, making the pressure data measurement more stable and accurate.
• Dual Pressure Test & Condensation/Evaporation Temp Display During the refrigerant filling process,digital gauges hvac will automatically calculate the pressure value of the refrigerant in the low-pressure pipe(condensation pressure) and the pressure value of the high-pressure pipe(evaporation pressure).At the same time,the corresponding condensation/evaporation temperature will be calculated and displayed to provide a reliable basis for judging the operating status of the refrigeration system.
• Vacuuming & Pressure Leak/Air Tightness Test Manifold gauge can be connected to a vacuum pump to perform vacuuming on the refrigeration system. When the vacuum reaches about 90% and will not continue to rise, the vacuuming is completed. After the vacuuming is completed, the mode can be adjusted to the leakage test state. By observing the pressure difference, it can be judged whether there is any leakage in the refrigeration system pipeline, and the duration of the leak test can be recorded.
• Visualization Window Observation & Multi-Unit Switching & Hook Design Refrigeration gauges are designed with a visual window to keep an eye on the refrigerant filling status. During the pressure test and temperature test, you can freely switch between pressure units and temperature units, including kPa, MPa, bar, inHg, PSI, and temperature unit switching between Celsius/Fahrenheit. The hook design of the hvac gauges allows you to perform the test and other operations with ease and effort.
• High-strength engineering plastics & 1/4-inch standard interface & TFT LCD display Digital hvac manifold gauge set is made of high-strength engineering plastic, the whole machine is solid and comfortable to hold. It uses a large-size TFT liquid crystal display and supports backlight display, making it easy to read data even in dimly lit or dark environments. 1/4-inch standard interface design ensures the durability and versatility of the instrument.
• 3-Year Warranty Our hvac digital gauges has a three-year warranty. HVAC manifold gauge set package includes: 1*main unit; 1*bottle opener; 1*valve core wrench; 2*Quick connector; 3*1.5 meters Three-color hose; 4* seals fittings; 1* suitcase; 1* instruction manual. If you have any questions during the use of digital manifold gauge set, please feel free to contact us.
• See more on Amazon...

Features

• Crankshaft pulley fixing tool This fixing tool is a professional tool specially used for crankshaft pulley,you can fix the crankshaft pulley when loosening/tightening the pulley fixing bolt.
• Compatible For v.w/r.outan/d.odge/c.hrysler & 3.6L 3.2L 3.0L Engine Crankshaft pulley wrench holding positioning tool is compatible for v.w/r.outan/d.odge/c.hrysler 3.6L 3.2L 3.0L engine.Equivalent to OEM tool codes 10198A.
• Corrosion-resistant high-quality metal steel material The crankshaft pulley fixing tool is made of high-quality metal steel, which is not only sturdy and durable, and the surface is treated with black paint, which has good corrosion resistance, which can prevent the product from corroding and rusting, and prolong its service life.
• Easy to Use Crankshaft Counter Holder tool has a simple structure and no complicated operation procedures, even a novice can easily use the tool, which can save your time and energy and give you the best experience.
• Perfect Match Crankshaft pulleys holding tool is carved by precise craftsmanship,it can fit the crankshaft pulley perfectly without any mismatch problem.
• See more on Amazon...

Features

• OBD2 breakout box With Pass-Through Feature OBD2 breakout box is a car diagnostic tool with pass-through function, which can connects inline between your OBDII diagnostic port and your ODB 2 reader or other ODB 2 device for effective and safe monitoring signals of protocol, power and grounds, and you can also use it to charge scanning tools via the ODB II port. Additionally, the breakout box can also be connected to a multimeter or oscilloscope for further detection of unconfirmed signals.
• Detect CAN bus/K-line/L-line/PWM Protocol Line OBD2 breakout box works great for communication line diagnoses, which not only helps you see the OBD signals as they are operational, but also detect some diesel signals, such as CAN bus, K-line, L-line and PWM protocol line. You can place this OBD2 breakout box between your diagnostic tool and your vehicle, which makes bus can and K-line diagnostics easier.
• LED Indicator Breakout box is designed with LED indicators that you quick visual indicators of the state of each data line plus power and ground via led lights.When vehicle body is properly grounded,Green LED of pins 4 and 5 will be on;when the power supply is normal,Red LED of pin 16 will be on;when the decoder communicates with the vehicle,pin 2 or 6/7/10/14/ 15 has signal waveform.Breakout box makes it super easy to test for good connections at the pins without dealing with finicky probes.
• 16 pins OBDII Interface & 90cm Cable OBD interface of the detector adopts a 16 pins design,the input jack layout fully emulates the 16-pin layout of the OBD interface,allowing more tests to be performed quickly and intuitively,you can have quick access to all 16 pin connections during vehicle service and diagnostics.You do not need to directly operate the pins of the OBDII interface.The cable length of the OBDII data line detector is 90 cm,which makes the device connection more convenient.
• 16 Standard 4mm Banana Sockets & Male and Female Connectors The built-in input jack of the OBD2 breakout box can connect any type of 4mm banana plug, you can connect a multimeter or oscilloscope to any jack to check voltages or signal levels. OBD2 breakout box has male and female connectors for connecting the car OBDII system and the scan tool, so that after you connect the scan tool, you can also detect each pin on the connector through the breakout box.
• Note Do not place a jumper between the power pin 16 and ground pins 4 and 5; Do not use this tool to power up a load devices exceeding 1 amp; Do not jumper pins together without understanding the circuits.
• See more on Amazon...

Features

• 1.[ Wide Application Range Of Fuel Injectors Removal Tools ]: The diesel injector puller is compatible with Ford Powerstroke Diesel (2011-2018) 6.7L F-250 F-350 F-450 F-550. The part number is 3418.
• 2.[ Removal Tool For Disassembling Fuel Injectors ]: The diesel injector removal tool kit is mainly used to assist you in removing the injector from the cylinder head. This process will not cause damage to your injector and other components.
• 3.[ Fuel Injectors Removal Tool Kit Made Of High-quality Materials ]: The removal tool is precisely processed from high-quality heat-treated steel. It is not only high in hardness but also accurate in design. High wear resistance and corrosion resistance make it durable.
• 4.[ Simple & Easy-to-operate Fuel Injector Removal Tool ]: The fuel injectors removal tool kit is very simple to use. First, you need to remove the bolt and crab slider. Second, you need to install the removal tool into the fuel injector. Third, you need to screw the long bolt into the remover, and then put the short bolt into the remover and tighten it. Finally, when you force the short bolt into the remover, the injector can be taken out.
• 5.[ Tips For Disassembling The Fuel Injectors ]: If you soak the injector in penetrating oil the day before disassembling the injector, you can better disassemble the injector and reduce damage to the components.
• See more on Amazon...