Debialo - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2 Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
Asin: B0BF52VGCN | Model: JMTT-001 | PartNumber: JMTT-001
【Work On Corroded & Frozen】Fully Machined Body And Screw, This Ferrule Puller Is Corrosion Resistant & Wear Resistant. Even Such As The Existing Supply Stops Are Severely Corroded Or Frozen, You Can Turn The Lever To Extract The Old Compression Sleeve From The Pipe..
【Great Compression Sleeve Puller Tool】We Love And Take Pride In Our Angle Stop Puller And We Back This Ferrule Blaster Up With Lifetime Service. Have The Confidence That This Compression Ring Removal Tool Will Last, If There Are Any Issues Of This Plumbing Tools, Just Contact Us And We Will Make It Right..
【Note】Please Note That This Compression Sleeve Puller Is For 1/2" Compression Fittings Only..
【Easy & Fast Remove】1.Remove The Old Compression Fitting Or The Old Angle Stop. 2.Put The Nut Of Pipe To The Golden Threaded Mouth Of The Puller Tool To Tighten The Screw 3.Make Sure The Ferrule Puller Is Properly Aligned With The Pipe, And Then You Are Able To Remove The Nut And Ferrule With Maybe 10 Turns Of The Handle. 4.The Puller Tool Will Automatically Pull Compression Nut And Ferrule..
【Not Need To Cut Off The Pipe】Saves A Lot Of Time Around Cutting Old Pipes. This Puller Tool Is Easy To Use In Relatively Tight Spots. Especially If You Don't Have Sufficient Exposed Copper To Cut Off The Old Compression Fitting, This Angle Stop Puller Will Effortlessly Remove The Old Compression Ring And Reform The Previously Crimped Copper Pipe Back To A Perfect Circle. No Damage To The Copper. Makes Removing A Nut And Ferrule Simple, And Makes Plumbing Work Simple..
Features
- No Damage To Walls & Copper & Supply Lines This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool.
- Not Need To Cut Off The Pipe Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple.
- Work On Corroded & Frozen Fully machined body and screw, this ferrule puller is corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.
- Easy & Fast Remove 1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule.
- Great Compression Sleeve Puller Tool We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
- NOTE Please note that this compression sleeve puller is for 1/2 compression fittings only.
- See more on Amazon...
Brand: Debialo | Manufacturer: Debialo
See On Amazon #2
4 in. Green Angled Drainage Grate Yard Drain, Yard Drain Emitter for Sump Pump Discharge & Downspout Extensions, Protect Home Foundation & Reduce Stagnant Water, Compatible with 4-Inch Connections
Asin: B0B8ZFS23H
【Fix Landscape Drainage Problems】The Oblique Angled Drainage Grate Blends Perfectly With A Sloped Landscaped And Holds Up Perfectly To Lawn Tractors. Low Profile Exit Grate That Keeps Critters Out Of Your Drainage System Without Impeding The Exodus Of Storm Water. Great For Drainage In Grass And Matches The Color Of Grass And Its Presloped To Work With The Slope Of The Soil. Easy To Mow Over Or Around And Virtually Maintenance-Free..
【Great Yard Drain】We Love And Take Pride In Our Yard Drain Emitter Which Works Well With French Drain And We Back This Drainage Pipe Up With Lifetime Service. Have The Confidence That This Well Made Drain Grate Will Last, If There Are Any Issues Of This Drainage Device, Just Contact Us And We Will Make It Right..
【Easy To Install】Hand Trenching Or Using A Small Walk-Behind Trenching Machine To Create A Smooth, Even Trench Or Installation. Install The Downspout Lines By Attaching Each Section Of Pipe And Properly Securing Them To Make Sure All Water Flows Out To The Exit Point. All Pipes Are Verified For Flow To The Exit Point. Install A Yard Grate At The End Of The Downspout Line To Allow The Water To Flow Freely. That Can Be Completed In A Day, Or Even A Few Hours Depending On The Size Of The Job..
【Reduce Stagnant Water & Freeze-Proof】Our Yard Drain Design Eliminates The Standing Water That Occurs In The Bottom Of Typical Drop Inlets. The Drainage Grates Can Prevent Critters Into The Pipe And Filling With Nesting Debris. Our Drain Grate Is Perfect For Use In Hard To Drain Areas Where Lack Of Grade Difference Is A Problem, And Works Well In Cold And Frozen Conditions. You Must Use A Pvc Schedule Coupling/Adapter/Conversion Or Fitting Bell To Connect To Our Drain. (Coupling Not Included).
Features
- Protect Your Home Foundation This yard drain can properly direct rainwater/water away from your foundation, avoid the water to drain back towards your home, also avoid the rain wash away the soil causing a leak or crack in your foundation. This yard drain is great for use as both an inlet and outlet for detention ponds, culverts, downspouts and numerous other applications. Prefect sump pump drain outlet.
- Reduce Stagnant Water & Freeze-Proof Our yard drain design eliminates the standing water that occurs in the bottom of typical drop inlets. The drainage grates can prevent critters into the pipe and filling with nesting debris. Our drain grate is perfect for use in hard to drain areas where lack of grade difference is a problem, and works well in cold and frozen conditions. You must use a pvc schedule coupling/adapter/conversion or fitting bell to connect to our drain. (Coupling Not Included)
- Fix Landscape Drainage Problems The oblique angled drainage grate blends perfectly with a sloped landscaped and holds up perfectly to lawn tractors. Low profile exit grate that keeps critters out of your drainage system without impeding the exodus of storm water. Great for drainage in grass and matches the color of grass and its presloped to work with the slope of the soil. Easy to mow over or around and virtually maintenance-free.
- Easy To Install Hand trenching or using a small walk-behind trenching machine to create a smooth, even trench or installation. Install the downspout lines by attaching each section of pipe and properly securing them to make sure all water flows out to the exit point. All pipes are verified for flow to the exit point. Install a yard grate at the end of the downspout line to allow the water to flow freely. That can be completed in a day, or even a few hours depending on the size of the job.
- Great Yard Drain We love and take pride in our yard drain emitter which works well with french drain and we back this drainage pipe up with lifetime service. Have the confidence that this well made drain grate will last, if there are any issues of this drainage device, just contact us and we will make it right.
- See more on Amazon...
Brand: Debialo | Manufacturer: Debialo
See On Amazon #3
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2 Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
Asin: B0BCF1CDPX | Model: HMTT-001 | PartNumber: HMTT-001
【Work On Corroded & Frozen】Even Such As The Existing Valve Was Severely Corroded Or Frozen, You Can Turn The Lever To Extract The Old Compression Sleeve From The Pipe. Make Sure The Ferrule Puller Is Properly Aligned With The Pipe, And Then You Are Able To Remove The Nut And Ferrule With Maybe 10 Turns Of The Handle. Easy And Fast Solve The Problem Of Compression Valves Failing With Small Leaks. Fully Machined Body And Screw, This Ferrule Puller Is Corrosion Resistant & Wear Resistant..
【Great Compression Sleeve Puller Tool】We Love And Take Pride In Our Angle Stop Puller And We Back This Ferrule Blaster Up With Lifetime Service. Have The Confidence That This Compression Ring Removal Tool Will Last, If There Are Any Issues Of This Plumbing Tools, Just Contact Us And We Will Make It Right..
【2 Ways To Remove】Remove The Old Compression Fitting Or The Old Angle Stop.Way 1: Only Remove The Ferrule---Let The Ferrule In Between The Red Notched End Of The Tool (Notched Clamping Ferrule). Way 2: Both Remove The Compression Nut And Ferrule---Place Red Notched End Of Tool Behind Compression Nut. And Then Both Way1 Or Way2 All Need To: Engage The Silver Head End In Tubing. Hold Tool Firmly While Turning The T-Bar Handle, The Puller Tool Will Automatically Pull Compression Nut And Ferrule..
【Not Need To Cut Off The Pipe】Saves A Lot Of Time Around Cutting Old Pipes. Re-Designed Bullet Nose Will Not Pull Off And Is Easy To Use In Relatively Tight Spots. Especially If You Don't Have Sufficient Exposed Copper To Cut Off The Old Compression Fitting, This Angle Stop Puller Will Effortlessly Remove The Old Compression Ring And Reform The Previously Crimped Copper Pipe Back To A Perfect Circle. No Damage To The Copper. Makes Removing A Ferrule Simple, And Makes Plumbing Work Simple..
Features
- No Damage To Walls & Copper & Supply Lines This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool.
- Not Need To Cut Off The Pipe Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple.
- Work On Corroded & Frozen Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small leaks. Fully machined body and screw, this ferrule puller is corrosion resistant & wear resistant.
- 2 Ways To Remove Remove the old compression fitting or the old angle stop.WAY 1: ONLY REMOVE THE FERRULE---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). WAY 2: BOTH REMOVE THE COMPRESSION NUT AND FERRULE---Place red notched end of tool behind compression nut. And then both way1 or way2 all need to: Engage the silver head end in tubing. Hold tool firmly while turning the t-bar handle, the puller tool will automatically pull compression nut and ferrule.
- Great Compression Sleeve Puller Tool We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if there are any issues of this plumbing tools, just contact us and we will make it right.
- See more on Amazon...
Brand: Debialo | Manufacturer: Debialo
Dimensions: 1.57 x 5.91 x 12.20 Inches
See On Amazon