DiGiYes - Buying Guide
Last Updated: 05/03/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
DiGiYes DC Motor Governor 12V 24V 36V 48V 20A High Power Drive Module 1200W PWM DC Motor Speed Controller Module with Knob Switch
Asin: B0BHYZQZ9R | Model: ROA_500 | PartNumber: ROA_500
The Dc Motor Speed Controller Uses Pwm Speed Control Technology (Pulse Width Modulation), Which Is Characterised By High Conversion Efficiency, Large Speed Range And Stable Performance..
Package Includes: 1 Pack Of Dc Motor Governor Module. The Product Is Suitable For Self-Recovery Fuse, The Current Is Too Large And Automatically Disconnects, And The Fuse Is Automatically Restored After Cooling..
High Power And High Efficiency: It Is Precise And Reliable With Good Long-Term Stability. With Fixing Screw Hole, Convenient For Install And Fixed. Small Size, Low Power Consumption, Fast Response..
Dc Motor Governor Specification: The Working Voltage Is Dc10-60V, Which Is Compatible With A 12V 24V 36V 48V Power Supply. Maximum Output Power: 1200W. The Current Is Up To 20A..
Features
- DC Motor Speed Controller Material: Made of electronic components, internal conductor: pure copper.
- DC Motor Governor Specification: The working voltage is DC10-60V, which is compatible with a 12V 24V 36V 48V power supply. Maximum output power: 1200W. The current is up to 20A.
- The DC motor speed controller uses PWM speed control technology (pulse width modulation), which is characterised by high conversion efficiency, large speed range and stable performance.
- High Power and High Efficiency: It is precise and reliable with good long-term stability. With fixing screw hole, convenient for install and fixed. Small size, low power consumption, fast response.
- Package Includes: 1 Pack of DC Motor Governor module. The product is suitable for self-recovery fuse, the current is too large and automatically disconnects, and the fuse is automatically restored after cooling.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
See On Amazon #2
5 Pack GT2 Pulley 16 Teeth 5mm Bore 16T Timing Belt Pulley Wheel Aluminum for 3D Printer
Asin: B0BYRKN5JL
Applies To 6Mm Width Belt. Contact With The 16 Teeth Side Which Minimizes The Risk Of The Belt Slipping..
Suitable For 3D Printer, Milling Machine, Gear Shaper, Drilling Machine, Cnc Engine Lathe, Hobbing Machine Or Other Machinery Transmission Occasions..
Surface Oxidation Treatment, Corrosion And Rust Prevention, Durable..
Gt2 Synchronous Wheel With Screws For Fixing, Easy To Install..
Features
- Teeth: 16T, Bore Diameter: 5mm. Total size: 13*13*14mm
- GT2 synchronous wheel with screws for fixing, easy to install.
- Applies to 6mm width belt. Contact with the 16 teeth side which minimizes the risk of the belt slipping.
- Surface oxidation treatment, corrosion and rust prevention, durable.
- Suitable for 3D printer, milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
See On Amazon #3
DiGiYes 6V 12V 24V 28V 3A 80W DC Motor Speed Controller PWM with Positive Inversion Control Switching Button, 2Pcs 6-28V 1203BB Adjustable Speed Controller Regulation Switch
Asin: B0CHMPLT77
The Input Power Range Is Dc 6-28V, The Maximum Continuous Output Current Is 3A, The Maximum Output Power Is 80W..
With Fixing Screw Hole, Convenient For Install And Fixed. Small Size, Low Power Consumption, Fast Response..
The Dc Motor Regulator Is Designed With A Knob, The Knob Is With Switch Function, You Can Turn Off The Controller By Screwing It; Control The Forward Or Reverse Direction And The Stop Of Dc Motor By Wire Switch, Precise And Reliable, With Good Long-Term Stability..
The Use Of Ultra-Soft High Temperature Resistant Silicone Wire, The Internal Conductor Is Pure Copper, Durable..
Features
- Motor speed controller (PWM) potentiometer with switch function.
- The use of ultra-soft high temperature resistant silicone wire, the internal conductor is pure copper, durable.
- The input power range is DC 6-28V, the maximum continuous output current is 3A, the maximum output power is 80W.
- The dc motor regulator is designed with a knob, the knob is with switch function, you can turn off the controller by screwing it; Control the forward or reverse direction and the stop of DC motor by wire switch, precise and reliable, with good long-term stability.
- With fixing screw hole, convenient for install and fixed. Small size, low power consumption, fast response.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.39 x 1.97 x 1.30 inches
See On Amazon #4
DiGiYes A4988 DRV8825 Stepper Motor Driver Control Extension Shield Board for 3D Printer, Step Motor Extension Module
Asin: B0CCRCBCQP
Jc E S D G Corresponds To The Enable Step Direction Gnd Drive Signal Output On The Connection..
Connect The Drv8825 Module: The Stepper Motor Dip Switch 1, 2, 3 Are Turned To The On, At This Time In The 32 Subdivision State, The Stepper Motor Speed Is Slow, Clockwise Half Turn Anticlockwise 1 Turn, Repeat The Cycle..
The Steering And Speed Of The Four Wire Stepper Motor Is Controlled By Toggling The Dip Switches On The Stepper Motor Driver Expansion Board. Different Combinations Of Dip Switches Have Different Effects On The Steering And Speed Of The Four Wire Stepper Motor..
Jm Connects The Motor. Jv Connects 5V And 12V-24V Power Supplies..
Features
- The A4988 / DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
- Jm connects the motor. Jv connects 5V and 12V-24V power supplies.
- Jc E S D G corresponds to the Enable Step Direction Gnd drive signal output on the connection.
- The steering and speed of the four wire stepper motor is controlled by toggling the dip switches on the stepper motor driver expansion board. Different combinations of dip switches have different effects on the steering and speed of the four wire stepper motor.
- Connect the DRV8825 module: The stepper motor dip switch 1, 2, 3 are turned to the ON, at this time in the 32 subdivision state, the stepper motor speed is slow, clockwise half turn anticlockwise 1 turn, repeat the cycle.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
See On Amazon #5
DiGiYes CR10 3D Extruder Back Support Plate with Pulley Extruding Backplate Fit for Ender 3 Ender 3s Ender 3 Pro Cr-10 Cr-10S S4 S5 Series Aluminum Extrusions Frame 3D Printers
Asin: B0C7MNJMHW
3D Printer Extruder Back Support Plate With Pulley, Adjustable Tightness..
Good Design For V Type Slot Aluminum Extrusions Frame 3D Printer, Easy To Install And Very Convenient.
Oxidized Treatment, Not Easily Stained With Dust, High Strength, And Stable Sliding..
Made Of High Grade Metal And Pom, It Is Very Durable..
Features
- Compatible with Ender-3 Ender 3s Ender 3 Pro Cr-10 Cr-10S S4 S5 Series Aluminum Extrusions frame 3D Printers
- Made of high grade metal and POM, it is very durable.
- 3D printer extruder back support plate with pulley, adjustable tightness.
- Oxidized treatment, not easily stained with dust, high strength, and stable sliding.
- Good design for V type slot Aluminum extrusions frame 3D printer, easy to install and very convenient
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.91 x 2.52 x 2.52 inches
See On Amazon #6
DiGiYes 5Pcs 2 Wire 0.28inch Voltage Tester Red LED Display Panel Mini DC Voltmeter for Cars/Motorcycles Battery Monitor
Asin: B0CJ6G5R4M
Automatic Adjustment Of Measurement Accuracy, When It Is Less Than 10V, It Is Accurate To 0.01V, And When It Is Greater Than 10V, It Is Accurate To 0.1V..
The Maximum Input Voltage Is Dc 30V (There Is A Risk Of Overheating Above This Voltage)..
Working Current: Less Than 23Ma..
Two-Wire Measurement Range: Dc 2.5-30V(Red)..
Features
- Two wire DC voltmeter, 0.28 inch LED digital display, equipped with reverse connection protection.
- Two-wire measurement range: DC 2.5-30V(Red).
- Automatic adjustment of measurement accuracy, when it is less than 10V, it is accurate to 0.01V, and when it is greater than 10V, it is accurate to 0.1V.
- Working Current: Less than 23mA.
- The maximum input voltage is DC 30V (there is a risk of overheating above this voltage).
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.35 x 1.18 x 0.47 inches
See On Amazon #7
DiGiYes GT2 Timing Belt 5M (16.4ft) Length Open Belt 2mm Pitch 6mm Width Rubber Fiberglass
Asin: B0BSMNZ53S
Non-Slip, Low Noise, High Transmission Efficiency, And Greatly Improve Your Work..
Suitable For Dishwashers, Packaging Machinery, Motorcycles, Automobile, Dryer, Food Machinery, Inkjet Printer, Conveyor, Bonders Ect..
High-Strength Structural Design, Anti-Extension, Make The Transmission More Stable..
This Belt With Function Of Shock Absorption, Low Noise, High Quality Workmanship And Long Service Life..
Features
- GT2 timing belt is made of rubber, fiberglass reinforced, 6mm width timing synchronous belt for 3D printer.
- This belt with function of shock absorption, low noise, high quality workmanship and long service life.
- Non-slip, low noise, high transmission efficiency, and greatly improve your work.
- High-strength structural design, anti-extension, make the transmission more stable.
- Suitable for dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders ect.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.23 x 5.90 x 3.93 inches
See On Amazon #8
DiGiYes GT2 Timing Belt Idler Pulley 20 Toothless 5mm Bore 10mm Width Timing Belt Idler Pulley Wheel for 3D Printer
Asin: B0BSPB4TZW | Model: EPC_DPA_703 | PartNumber: EPC_DPA_703
Material: High Quality Aluminum, Adopt Surface Oxidation Treatment, Anti-Rust And Anti-Corrosion Effectively..
Application: Widely Used In Milling Machines, Gear Forming Machines, Drilling Machines, Cnc Machine Tools, Hobbing Machines Or Other Mechanical Transmission Applications..
Double Bearings: Use High-Quality Motor-Grade Bearings To Ensure That The Machine Is Works Good..
Size: Teeth Type 20 Toothless, Bore 5Mm..
Features
- Product Contain: 5 x Timing belt pulleys, suitable for 10mm wide timing belt
- Size: Teeth Type 20 Toothless, Bore 5mm.
- Material: High quality Aluminum, Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively.
- Double bearings: Use High-quality Motor-grade bearings to ensure that the machine is works good.
- Application: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
See On Amazon #9
DiGiYes 3D Printer Extruder Upgraded Replacement Right Hand Extruder Kit for 3D Printer 1.75mm Filament Works with Ender 3 Series, Ender 5 Series, CR-10 Series
Asin: B0BSKZB8F1
All Metal Mk-8 Extruder Feeder Drive 1.75Mm Filament. It Makes Loading The Filament Easier And Smoother, With No Worries About Filament Scraping Or Breaking..
Right Hand Extruder Kit--Perfect Replacement For Creality 3D Printers Ender3, Ender5, Cr-10 Series, Cr-10 S4, Cr-10 S5, Cr-10 Mini, Cr-10S, Cr-10 Plus..
Easy To Install,All You Do Is Unbolt The Old Original Plastic Extruder And Screw In The New "Metal Extruder" And Ready To Start Printing..
You Need To Assemble By Yourself. Our Extruder Kit Includes All The Necessary Screws And Parts Needed, It Can Directly Replace Your Old Original Weak Plastic Extruder..
Features
- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this this extruder kit more stable and durable.
- You need to assemble by yourself. Our extruder kit includes all the necessary screws and parts needed, it can directly replace your old original weak plastic extruder.
- All metal MK-8 extruder feeder drive 1.75mm filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking.
- Easy to Install,All you do is unbolt the old original plastic extruder and screw in the new Metal Extruder and ready to start printing.
- Right Hand Extruder Kit--Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.59 x 2.20 x 1.65 inches
See On Amazon #10
DiGiYes 120pcs Breadboard Jumper Wires 20cm 40pin Male to Male Multicolored Dupont Wire Ribbon Cables
Asin: B0BKW5P5YH | Model: ROA_606 | PartNumber: ROA_606
Cable Length: 20Cm (7.87 Inch) / Cable Material: 12-Core Pure Copper Wire..
Application: For Raspberry Pi / Parallax / Diy Experiment / Electronic Projects / Arduino Breadboard / Pc Motherboard / Pcb Project..
Cable Feature: The Dupont Wires Can Be Separated To Form An Assembly Containing The Number Of Wires You Require For Your Connection And To Support Non-Standard Odd-Spaced Headers..
Package Include: 3 X 40Pin Male To Male Jumper Wires (Total 120Pcs)..
Features
- Connector Type: Standard 2.54mm Pitch 1Pin-1Pin Dupont Housing Connector, with brass nickel plated terminals, provides excellent electrical conductivity and oxidation resistance.
- Package include: 3 x 40pin Male to Male jumper wires (Total 120pcs).
- Cable length: 20cm (7.87 inch) / Cable material: 12-core pure copper wire.
- Cable Feature: The dupont wires can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.
- Application: For Raspberry pi / Parallax / DIY experiment / Electronic projects / Arduino breadboard / PC motherboard / PCB project.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.11 x 8.26 x 1.96 inches
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon #11
DiGiYes Bowden PTFE Tubing 1M Fit for Ender 3 Ender 5 / CR-10 CR-20 Series / 1.75mm Filament with Tube Cutter, 2 X KJH04-M6, and 2 X PC4-M10 Joints, 3D Printer Extruder Fitting
Asin: B0C3CNB2RL
-- Two Kjh04-M6 Extruder Joints And Two Hot End Pc4-M10 Joints Are Suitable For Ptfe Tube With An Inner Diameter Of 2Mm And An Outer Diameter Of 4Mm. H59 Copper Material, With Galvanized Surface Treatment..
-- Designed For 1.75Mm Filament, Tubing Has Extremely Accurate Inner & Outer Diameters, And Filament Loads Smoothly Into The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend..
-- 1 Tube Cutter That Can Cut Both Sides Of The Feed Pipe Flat To Prevent Any Malfunctions Or Heat Spread During The Feeding And Retraction Process. It Can Also Cut Various Ptfe Pipes And Pe Pipes..
-- Tube Length: 1 Meter, Inner Diameter: 2Mm, Outer Diameter: 4Mm. The Optimal Inner Diameter Size Is Designed To Reduce "Wiggle Room" Or Bending In The Tube..
Features
- -- This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube can keep working at temperatures up to 340 degrees Celsius.
- -- Tube length: 1 meter, inner diameter: 2mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce wiggle room or bending in the tube.
- -- Two KJH04-M6 extruder joints and two hot end PC4-M10 joints are suitable for PTFE tube with an inner diameter of 2mm and an outer diameter of 4mm. H59 copper material, with galvanized surface treatment.
- -- 1 tube cutter that can cut both sides of the feed pipe flat to prevent any malfunctions or heat spread during the feeding and retraction process. It can also cut various PTFE pipes and PE pipes.
- -- Designed for 1.75mm filament, tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
See On Amazon #12
DiGiYes 6Pcs 3D Printer Timing Belt 2GT-6 Closed Loop Rubber Belt Length 110mm 158mm 200mm 280mm 300mm 400mm Width 6mm
Asin: B0C27YCCGP
Abrasion Resistance Of Nylon Tooth Surface, Better Protection Of Tooth Joint And Extend Service Life..
Application:Widely Used In Milling Machine, Gear Shaper, Drilling Machine, Hobbing Machine Or Other Machinery Transmission Occasions.
Good Flexibility And Stability. 360 Degree Rotation Is Not Easy To Break, Wear Resistance, More Durable..
The Tooth Surface Of The Belt Is Made Up Of A Special Anti Skid Cloth..
Features
- 2GT Non slip closed loop synchronous belt, belt width 6mm, length 110mm / 158mm / 200mm / 280mm / 300mm / 400mm
- The tooth surface of the belt is made up of a special anti skid cloth.
- Abrasion resistance of nylon tooth surface, better protection of tooth joint and extend service life.
- Good flexibility and stability. 360 degree rotation is not easy to break, wear resistance, more durable.
- Application:Widely used in milling machine, gear shaper, drilling machine, hobbing machine or other machinery transmission occasions
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.59 x 7.87 x 5.91 inches
See On Amazon #13
DiGiYes 3D Printer Heater Block Silicone Sock, 5 Pcs Upgrade Hotend Cover Fit for E3D / Volcano Heater Block
Asin: B0C5R49XDH
Silicone Sock Can Keep Heater Block Clean And Also Can Be Keep Warm To Make The Printing Temperature More Stable.
Package: 5Pieces Silicone Socks (Please Note: This Silicone Sock Only Can Be Used Under 280C Degree).
The Insulation Sleeve Has Excellent Insulation Characteristics And Can Effectively Maintain The Temperature Stability Of The Heating Block, Especially For Printing Heads Equipped With A Model Cooling Fan, Which Can Effectively Maintain The Temperature Of The Heating Block Without Being Affected By The Surrounding Flowing Wind And Improve Printing Effect..
The Product Has Good Elasticity And Can Be Installed Closer To The Heating Block, Preventing It From Falling Off Easily..
Features
- Made of High temperature resistance silicone material, it will not adhere to any other printing materials and is easy to clean. It can effectively maintain cleanliness around the heating block and nozzle.
- The product has good elasticity and can be installed closer to the heating block, preventing it from falling off easily.
- Silicone sock can keep heater block clean and also can be keep warm to make the printing temperature more stable
- The insulation sleeve has excellent insulation characteristics and can effectively maintain the temperature stability of the heating block, especially for printing heads equipped with a model cooling fan, which can effectively maintain the temperature of the heating block without being affected by the surrounding flowing wind and improve printing effect.
- Package: 5pieces silicone socks (PLEASE NOTE: This silicone sock only can be used under 280C degree)
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.63 x 1.14 x 0.87 Inches
See On Amazon #14
DiGiYes 20Pcs Mini Vibration Motors DC 3V 12000rpm 10mmx3mm Flat Coin Button-Type Micro Vibrating Motor for Mobile Cell Phone Tablet
Asin: B0CP5T2NWF
Dopting High-Strength Premium Copper Wire, With Stable Electrical Performance, Strong Thermal Conductivity, High Hardness, High Temperature Resistance, Pressure Resistance, Explosion Resistance, And Corrosion Resistance..
Widely Used In Industries Such As Electronic Products, Medical Equipment, Beauty Equipment, Massage Equipment, Health Products, Handicrafts, Intelligent Robots, Etc..
Compact Size, Waterproof Design, Strong Vibration, Low Noise, And Long Service Life..
Using A Copper Alloy Shell, It Is Rust Resistant And Corrosion Resistant, With Good Thermal Conductivity And Electromagnetic Interference Resistance..
Features
- 1030 Micro vibration motor. Outer diameter: 10mm; Thickness: 3.0mm; Rated voltage: DC 3V; Rated current: 80mA; Rated speed: 12000 RPM; Voltage range: DC 2.5 - 4V.
- Using a copper alloy shell, it is rust resistant and corrosion resistant, with good thermal conductivity and electromagnetic interference resistance.
- dopting high-strength premium copper wire, with stable electrical performance, strong thermal conductivity, high hardness, high temperature resistance, pressure resistance, explosion resistance, and corrosion resistance.
- Compact size, waterproof design, strong vibration, low noise, and long service life.
- Widely used in industries such as electronic products, medical equipment, beauty equipment, massage equipment, health products, handicrafts, intelligent robots, etc.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.12 x 0.39 x 0.39 inches
See On Amazon #15
DiGiYes 3Pcs DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps
Asin: B0BXL5VYPT | Model: EMD_20N | PartNumber: EMD_20N
4 Layer Pcb Board, Better Heat Dissipation Performance..
Overheat Closed Circuit, Undervoltage Lock, Cross Current Protection..
The Chip Has Smaller Internal Resistance, Lower Heat And Better Heat Dissipation..
Suitable For Driving 8.2V - 45V 2.5A Stepper Motor..
Features
- Six different stepping modes: Full, half, 1/4, 1/8, 1/16, 1/32.
- Suitable for driving 8.2V - 45V 2.5A stepper motor.
- 4 layer PCB board, better heat dissipation performance.
- The chip has smaller internal resistance, lower heat and better heat dissipation.
- Overheat closed circuit, undervoltage lock, cross current protection.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.31 x 0.83 x 0.59 inches
See On Amazon #16
DiGiYes 5Pcs Extruder Wheel Gear 36 Teeth Gear Stainless Steel 3D Printer Parts Drive Gear for MK7 MK8 Extruder
Asin: B0BSLH73M1
These Drive 36 Teeth Gears Are Made Of Quality Stainless Steel, Rustproof And No Corrosion, Durable And Stable To Use, With Good Bearing Capacity, Allow For Improving Your Printers' Work Efficiency..
Compatible With Creality Cr-10 Cr-10, S4 S5, Ender 3 Ender 3 Pro,Anet A8, Etc..
Quickly Replace Damaged Gear To Make Your Printer Work More Efficiently And Improve The Performance And Reliability Of Your 3D Printer..
Each 36 Teeth Gear Measures Approx. 11 X 11 Mm/ 0.43 X 0.43 Inch (L X W), Its Inner Diameter Is Approx. 5 Mm/ 0.2 Inch, 36 Teeth, Fit For Most Standard 3D Printers..
Features
- This package contains 5 pieces extruder wheels in a pack, sufficient quantity to satisfy your various demands and replacements.
- Each 36 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is approx. 5 mm/ 0.2 inch, 36 teeth, fit for most standard 3D printers.
- These drive 36 teeth gears are made of quality stainless steel, rustproof and no corrosion, durable and stable to use, with good bearing capacity, allow for improving your printers' work efficiency.
- Quickly replace damaged gear to make your printer work more efficiently and improve the performance and reliability of your 3D printer.
- Compatible with Creality CR-10 CR-10, S4 S5, Ender 3 Ender 3 Pro,Anet A8, etc.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.43 x 0.43 x 0.43 Inches
See On Amazon #17
DiGiYes Precise Function Signal Generator XR2206 1Hz-1MHz Adjustable Sine Triangle Square Output Frequency Module
Asin: B0CCP2X3RF | Model: EMD_215 | PartNumber: EMD_215
After Completing The Connection, Before Powering On, Check The Ic Whether Against, Such As Anti Please Timely Correction, Insert The Might Damage The Chip..
Wide Range Of Power Supply, Can Use 9-12V External Power Supply Or 9V Battery..
The Frequency Amplitude Is Adjustable, And The Frequency Adjustable Range Is 1Hz-1Mhz..
Power Supply For 5.5 * 2.1 Port, The Inside Is Positive And The Outside Is Negative Polarity, Fitting For 9-12V Power Supply Voltage. The Waveform May Not Be Stable For More Than 12V..
Features
- XR2206 precise function signal generator, this module is a welded finished product that does not require manual welding. You only need to assemble the shell to use it.
- Power supply for 5.5 * 2.1 port, the inside is positive and the outside is negative polarity, fitting for 9-12V power supply voltage. The waveform may not be stable for more than 12V.
- After completing the connection, before powering on, check the IC whether against, such as anti please timely correction, insert the might damage the chip.
- The frequency amplitude is adjustable, and the frequency adjustable range is 1Hz-1MHz.
- Wide range of power supply, can use 9-12V external power supply or 9V battery.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 1.26 x 2.95 x 2.17 inches
See On Amazon #18
DiGiYes 3Pcs Stepper Motor Driver Module with Heat Sink Compatible with Stepstick Stepper A4988 3D Printer Reprap
Asin: B0BSMH447N
The Converter Is The Key To The Easy Implementation Of The A4988. As Long As A Pulse Is Input Into The Step Input, The Motor Can Be Driven To Generate Micro Steps. No Phase Sequence Table, High Frequency Control Line Or Complex Interface Programming Is Required..
The A4988 Interface Is Ideal For Applications Where Complex Microprocessors Are Unavailable Or Overloaded..
The A4988 Comes In A Surface-Mounted Qfn Package (Es) With An Exposed Cooling Panel For Enhanced Heat Dissipation. The Package Is Lead-Free (Suffix -T) With 100 Percent Fog-Tin Plated Pin Frame..
The Product Can Operate Bipolar Stepping Motor In Full, Half, 1/4, 1/8 And 1/16 Step Modes, And The Output Drive Performance Can Reach 35V And 2A..
Features
- The A4988 is a complete micro step motor driver with built-in converter for easy operation.
- The product can operate bipolar stepping motor in full, half, 1/4, 1/8 and 1/16 step modes, and the output drive performance can reach 35V and 2A.
- The converter is the key to the easy implementation of the A4988. As long as a pulse is input into the Step input, the motor can be driven to generate micro steps. No phase sequence table, high frequency control line or complex interface programming is required.
- The A4988 comes in a surface-mounted QFN package (ES) with an exposed cooling panel for enhanced heat dissipation. The package is lead-free (suffix -T) with 100 percent fog-tin plated pin frame.
- The A4988 interface is ideal for applications where complex microprocessors are unavailable or overloaded.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.47 x 0.78 x 0.59 inches
See On Amazon #19
DiGiYes 2Pcs 150W DC-DC 10-32V to 12-35V Boost Converter Module Voltage Adjustable for Laptop Voltage Charger/Car Power
Asin: B0CJ2S13YN | Model: EMD_G01 | PartNumber: EMD_G01
Conversion Efficiency: 94 Percent (Measured When Input 16V And Output 19V 2.5A, For Reference Only)..
The Module Uses A Multi Turn Precision Potentiometer, The Adjustment Accuracy And Reliability Are Very High, There Will Not Be A Sudden Increase In The Output Voltage, You Can Rest Assured To Use..
This Module Is A Booster Module, The Output Voltage Is Always Higher Than The Input Voltage. The Input Voltage Is 10 - 32V, Output Voltage 12 - 35V Continuously Adjustable (Default Fixed Output 19V)..
Output Power: Natural Cooling Of 100W (Max), With A Fan Of 150W (Max), Easy To Drive 65W And 90W Laptops. When Using For A Long Time, Please Determine Whether To Add A Fan Based On The Actual Usage Power, And Ensure That The Temperature Of The Radiator Does Not Exceed 80 Degrees..
Features
- Output current: 6A (Max), input current: 10A (Max) (Please enhance heat dissipation if more than 10A).
- Output power: Natural cooling of 100W (Max), with a fan of 150W (Max), easy to drive 65W and 90W laptops. When using for a long time, please determine whether to add a fan based on the actual usage power, and ensure that the temperature of the radiator does not exceed 80 degrees.
- Conversion efficiency: 94 percent (measured when input 16V and output 19V 2.5A, for reference only).
- This module is a booster module, the output voltage is always higher than the input voltage. The input voltage is 10 - 32V, output voltage 12 - 35V continuously adjustable (default fixed output 19V).
- The module uses a multi turn precision potentiometer, the adjustment accuracy and reliability are very high, there will not be a sudden increase in the output voltage, you can rest assured to use.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.91 x 2.56 x 0.85 Inches
See On Amazon #20
DiGiYes 50PCS 1/4"-20 Wing Nuts, 304 Stainless Steel Parts Hand Twist Tighten Fasteners Butterfly Nut (1/4"-20 50Pack)
Asin: B0C2VDLZ41
Easy To Install: Smooth Finish Making Using Them Easy On The Fingers, No Sharp Edges, No Burrs, Tighten Nicely, You Do Not Have To Worry About The Rust Issue..
Application: Widely Use On Indoor And Outdoor, Machinery And Equipment, Electronic Equipment, Communications Equipment, Hardware Lighting, Building Bridges, Furniture Decoration, Etc..
Features: The Butterfly Nuts Have Two Wings Which Provide A Solid Grip, Making It Easier To Tighten Or Loosen By Hand. Can Be Used With Or Without Washers..
Material: These Wing Nuts Are Made Of High Quality 304 Stainless Steel Which Has High Hardness,Corrosion Resistance,Oxidation Resistance,Low Temperature Resistance..
Features
- SIZE: 1/4"-20. Inside diameter: 1/4". Thread per inch: 20.
- Material: These Wing Nuts are made of high quality 304 stainless steel which has high hardness,corrosion resistance,oxidation resistance,low temperature resistance.
- Easy to Install: Smooth finish making using them easy on the fingers, no sharp edges, no burrs, tighten nicely, you do not have to worry about the rust issue.
- Features: The butterfly nuts have two wings which provide a solid grip, making it easier to tighten or loosen by hand. Can be used with or without washers.
- Application: Widely use on indoor and outdoor, machinery and equipment, electronic equipment, communications equipment, hardware lighting, building bridges, furniture decoration, etc.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.51 x 1.14 x 0.55 inches | Weight: 0.55 Pounds
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon