DollSafe - Buying Guide
Last Updated: 04/30/2024
Share on
Bestselling from DollSafe on Amazon
- DollSafe Clear Folding Display Box for Extra Large 11-12.5 inch Dolls and Action Figures, 6" W x 3" ...
- DollSafe Deluxe Clear Folding Display Case with Acrylic Top and Base for 11-12 inch Dolls or Action ...
- DollSafe Clear Folding Display Box for 11-12.5 inch Dolls and Action Figures, 4" W x 2.25" D x 13" H...
- DollSafe Clear Folding Display Box for Large 11-12.5 inch Dolls and Action Figures, 5" W x 2.5" D x 13" H
- DollSafe Clear Folding Display Box for Thin 11-12 inch Dolls and Action Figures, 3" W x 2" D x 12.5"...
- DollSafe Clear Folding Display Box for Large 5-6 inch Dolls and Action Figures, 5" W x 2.5" D x 6.5" H
- DollSafe Clear Folding Display Box for 7-8 inch Dolls and Action Figures, 4" W x 2.25" D x 8.5" H
- DollSafe Clear Folding Display Box for Thin 7-8 inch Dolls and Action Figures, 3" W x 2" D x 8.5" H,...
- DollSafe Clear Folding Display Box for Large 7-8 inch Dolls and Action Figures, 5" W x 2.5" D x 8.5"...
- DollSafe Clear Folding Display Box for Thin 8.5-9.5 inch Dolls and Action Figures, 3" W x 2" D x 10" H
#1
DollSafe Clear Folding Display Box for Extra Large 11-12.5 inch Dolls and Action Figures, 6" W x 3" D x 13" H
Asin: B01M0TON82 | Model: DSDB6x3x13 | PartNumber: DSDB6x3x13 | Ean: 0840003122169 | UPC: 840003122169
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12.5 Inches Tall And 6 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 6 x 3 x 13 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12.5 inches tall and 6 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 13.00 x 3.00 x 6.00 inches | Weight: 0.27 Pounds
See On Amazon #2
DollSafe Deluxe Clear Folding Display Case with Acrylic Top and Base for 11-12 inch Dolls or Action Figures, 9.5" W x 5" D x 13" H
Asin: B01M068MJK | Model: DSDDC95x5x13 | PartNumber: DSDDC95x5x13 | Ean: 0840003122404 | UPC: 840003122404
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12 Inches Tall And 9 Inches Wide..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Place It On Top Of The Bottom Acrylic Cap. The Cap Goes Inside The Plastic Sleeve So That All 4 Sides Of The Plastic Sleeve Slide Down Around The Acrylic Cap's Edge. If Assembled Correctly, The Sleeve And Cap Will Have A Secure Friction Fit. Now, Place Your Doll Or Figure Inside And Insert The Top Cap Inside The Top Of The Plastic Sleeve. Important: The Acrylic End Caps Insert Inside The Top And Bottom Of The Sleeve..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 9.5 x 5 x 13 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, place it on top of the bottom acrylic cap. The cap goes inside the plastic sleeve so that all 4 sides of the plastic sleeve slide down around the acrylic cap's edge. If assembled correctly, the sleeve and cap will have a secure friction fit. Now, place your doll or figure inside and insert the top cap inside the top of the plastic sleeve. IMPORTANT: The acrylic end caps insert INSIDE the top and bottom of the sleeve.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12 inches tall and 9 inches wide.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 13.00 x 5.00 x 9.50 Inches | Weight: 0.52 Pounds
See On Amazon #3
DollSafe Clear Folding Display Box for 11-12.5 inch Dolls and Action Figures, 4" W x 2.25" D x 13" H, Pack of 2
Asin: B09968PFV6 | Model: DSDB4x225x13-2 | PartNumber: DSDB4x225x13-2 | Ean: 0840003168976 | UPC: 840003168976
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12.5 Inches Tall And 4 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 4 x 2.25 x 13 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12.5 inches tall and 4 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 13.00 x 2.25 x 4.00 inches | Weight: 0.40 pounds
See On Amazon #4
DollSafe Clear Folding Display Box for Large 11-12.5 inch Dolls and Action Figures, 5" W x 2.5" D x 13" H
Asin: B01LZ6ZC9H | Model: DSDB5x2.5x13 | PartNumber: DSDB5x2.5x13 | Ean: 0840003122077 | UPC: 840003122077
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12.5 Inches Tall And 5 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 5 x 2.5 x 13 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12.5 inches tall and 5 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 13.00 x 2.50 x 5.00 inches | Weight: 0.25 pounds
See On Amazon #5
DollSafe Clear Folding Display Box for Thin 11-12 inch Dolls and Action Figures, 3" W x 2" D x 12.5" H, Pack of 20
Asin: B00R6PZLSI | Ean: 0840003121940 | UPC: 840003121940
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12 Inches Tall And 3 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 3 x 2 x 12.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12 inches tall and 3 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 12.50 x 2.00 x 3.00 inches | Weight: 2.80 pounds
See On Amazon #6
DollSafe Clear Folding Display Box for Large 5-6 inch Dolls and Action Figures, 5" W x 2.5" D x 6.5" H
Asin: B01LZ6ZD33 | Model: DSDB5x2.5x6.5 | PartNumber: DSDB5x2.5x6.5 | Ean: 0840003122107 | UPC: 840003122107
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 5-6 Inches Tall And 5 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 5 x 2.5 x 6.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 5-6 inches tall and 5 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 6.50 x 2.50 x 5.00 inches | Weight: 0.25 pounds
See On Amazon #7
DollSafe Clear Folding Display Box for 7-8 inch Dolls and Action Figures, 4" W x 2.25" D x 8.5" H
Asin: B01LWLANVZ | Model: DSDB4x2.25x8.5 | PartNumber: DSDB4x2.25x8.5 | Ean: 0840003122046 | UPC: 840003122046
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 7-8 Inches Tall And 4 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 4 x 2.25 x 8.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 7-8 inches tall and 4 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 8.50 x 4.00 x 2.25 inches | Weight: 0.25 pounds
See On Amazon #8
DollSafe Clear Folding Display Box for Thin 7-8 inch Dolls and Action Figures, 3" W x 2" D x 8.5" H, Pack of 20
Asin: B001F34SAO | Ean: 0840003121971 | UPC: 840003121971
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 7-8 Inches Tall And 3 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 3 x 2 x 8.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 7-8 inches tall and 3 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 8.50 x 2.00 x 3.00 inches | Weight: 2.20 pounds
See On Amazon #9
DollSafe Clear Folding Display Box for Large 7-8 inch Dolls and Action Figures, 5" W x 2.5" D x 8.5" H, Pack of 2
Asin: B09967YGYN | Ean: 0840003169126 | UPC: 840003169126
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 7-8 Inches Tall And 5 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 5 x 2.5 x 8.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 7-8 inches tall and 5 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 8.50 x 2.50 x 5.00 inches | Weight: 0.32 pounds
See On Amazon #10
DollSafe Clear Folding Display Box for Thin 8.5-9.5 inch Dolls and Action Figures, 3" W x 2" D x 10" H
Asin: B01LZIQYLZ | Ean: 0840003121902 | UPC: 840003121902
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 8.5-9.5 Inches Tall And 3 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 3 x 2 x 10 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 8.5-9.5 inches tall and 3 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 10.00 x 2.00 x 3.00 inches | Weight: 0.25 pounds
See On Amazon #11
DollSafe Clear Folding Display Box for 5-6 inch Dolls and Action Figures, 4" W x 2.25" D x 6.5" H, Pack of 2
Asin: B09968XF3Z | Ean: 0840003169003 | UPC: 840003169003
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 5-6 Inches Tall And 4 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 4 x 2.25 x 6.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 5-6 inches tall and 4 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 6.50 x 2.25 x 4.00 inches | Weight: 0.25 Pounds
See On Amazon #12
DollSafe Clear Folding Display Box with White Liners and White Elastic Stabilizers for 11-12 inch Fashion Doll, 3" W x 2" D x 12.5" H
Asin: B01M0HX6DZ | Ean: 0840003122312 | UPC: 840003122312
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12 Inches Tall And 3 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 3 x 2 x 12.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12 inches tall and 3 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 12.50 x 2.00 x 3.00 inches | Weight: 0.25 pounds
See On Amazon #13
DollSafe Clear Folding Display Box with White Liners and White Elastic Stabilizers for 11-12.5 inch Dolls and Action Figures, 4" W x 2.25" D x 13" H, Pack of 5
Asin: B0996C8H5M | Ean: 0840003169331 | UPC: 840003169331
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12.5 Inches Tall And 4 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 4 x 2.25 x 13 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12.5 inches tall and 4 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 13.00 x 2.25 x 4.00 inches | Weight: 1.68 pounds
See On Amazon #14
DollSafe Clear Folding Display Box with White Liners and Black Elastic Stabilizers for 11-12 inch Fashion Doll, 3" W x 2" D x 12.5" H, Pack of 5
Asin: B0996BK38B | Ean: 0840003169249 | UPC: 840003169249
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12 Inches Tall And 3 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 3 x 2 x 12.5 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12 inches tall and 3 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 12.50 x 2.00 x 3.00 inches | Weight: 1.25 pounds
See On Amazon #15
DollSafe Clear Folding Display Box with White Liners and Black Elastic Stabilizers for 11-12.5 inch Dolls and Action Figures 4" x 2.25" x 13", Pack of 2
Asin: B0996BCX83 | Ean: 0840003169287 | UPC: 840003169287
Sleeve Assembly: To Assemble, Lay Out The Plastic Sleeve And Identify The 4 Corners Of The Case. Two Corners Are Creased, And Two Corners Are Flattened. Open The Case By Placing Your Hand Inside The Sleeve And Gently Pressing Downward On The Creased Corners Against A Flat Surface To Open Them To 90-Degrees. Find The Flattened Corners And Gently Crease Them From The Outside To Form Ninety-Degree Corners. Work All 4 Corners Until The Sleeve Can Stand On Its Own Without Bowing..
Uses: This Dollsafe Display Box Is A Safe And Secure Way To Store Or Display Your Fashion Dolls, Porcelain Dolls, And Action Figures That Are 11-12.5 Inches Tall And 4 Inches Wide. Does Not Include Pictured Doll Or Action Figure..
Cap Assembly: Once The Sleeve Is Standing Comfortably, Take One Plastic Cap And Slide Its Folded Sides Down Over The Long Sides Of Your Case. The Cap Inserts Into The Dollsafe Sleeve. Snap The Locking Tab Into Place On Each Side. Turn Your Sleeve Over And Insert The Other Cap The Same Way..
Material: Made From A Flexible, Clear Plastic That Will Arrive Flattened. Assembly Will Take About 5 Minutes. See Instruction Photo..
Features
- SIZE: 4 x 2.25 x 13 inches (width x depth x height)
- MATERIAL: Made from a flexible, clear plastic that will arrive flattened. Assembly will take about 5 minutes. See instruction photo.
- SLEEVE ASSEMBLY: To assemble, lay out the plastic sleeve and identify the 4 corners of the case. Two corners are creased, and two corners are flattened. Open the case by placing your hand inside the sleeve and gently pressing downward on the creased corners against a flat surface to open them to 90-degrees. Find the flattened corners and gently crease them from the outside to form ninety-degree corners. Work all 4 corners until the sleeve can stand on its own without bowing.
- CAP ASSEMBLY: Once the sleeve is standing comfortably, take one plastic cap and slide its folded sides down over the long sides of your case. The cap inserts into the DollSafe sleeve. Snap the locking tab into place on each side. Turn your sleeve over and insert the other cap the same way.
- USES: This DollSafe display box is a safe and secure way to store or display your fashion dolls, porcelain dolls, and action figures that are 11-12.5 inches tall and 4 inches wide. Does not include pictured doll or action figure.
- See more on Amazon...
Brand: DollSafe | Manufacturer: Collecting Warehouse
Dimensions: 13.00 x 2.25 x 4.00 Inches | Weight: 0.67 pounds
See On Amazon