Donepart - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from Donepart on Amazon
- Donepart 1/2 inch Bearings, 1/2 x1-1/8 x5/16 inch R8-2RS Double Rubber Sealed Roller Bearings, ABEC3...
- Donepart R16-2RS Bearings, 1 Inch ID x2 Inch OD x1/2" Thick C3 High Speed Pre-Lubricated and Double ...
- Donepart 100 Pack 608-2RS Skateboard Bearings, C3 High Speed Sealed Bearings for Electric Motor, Ska...
- Donepart 6202RS Bearings 15mm ID, 35mm OD, 11mm Thick 6202-2RS C3 High Speed Deep Groove Sealed Beai...
- Donepart 608-2RS Bearing, 608 Bearings, C3 High Speed 8mmx22mmx7mm Bearings, Double Sealed Small Bea...
- Donepart R6 2RS Bearings 3/8 ID x 7/8 OD x 9/32 Width Small Bearings Pre-Lubricated and Double Rubbe...
- Donepart Bearings 5/8" IDx 1-3/8" ODx .433" Thick 99502H-2RS Double Rubber Sealed Bearings for Go Ka...
- UCFL205-16 Pillow Block Bearing, Flange-Mount Ball Bearing Unit, 1 in Bore, 2-Bolt Flange, Self Alig...
- Donepart 5x11x4mm MR115-2RS Bearings Width Miniature Small Bearings Pre-Lubricated and Double Rubber...
- Donepart 6203RS Ball Bearings 17mm ID 40mm OD 12mm Width C3 High Speed 6203-2RS Sealed Bearings for ...
#1
Donepart 1/2 inch Bearings, 1/2 x1-1/8 x5/16 inch R8-2RS Double Rubber Sealed Roller Bearings, ABEC3 Precision for Electric Motor, Wheels, Home Appliances, Garden Machinery (10 Pack)
Asin: B07X5Z82LH | Model: R8-2RS | PartNumber: R8-2RS
Double Rubber Sealed Shields On Both Sides Of The Bearing To Keep Lubricant In And Contaminants Out, Lubricated At Manufacturer For No Additional Lubrication Required. Verify That The Shaft And Housing Are Properly Sized And Aligned To Accommodate The R8-2Rs Bearing Before Installation..
Wide Range Of Applications: Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool Industrial Production And More..
Material: Made Of 100% Alloy Steel Material As Compared To Carbon Steel. Make It Long Usage Life And Improves Its Machinability. Designed To Withstand Wear And Tear, Offering Prolonged Service Life And Reduced Maintenance Requirements. This Feature Ensures Consistent Performance Over Time, Even In Challenging Environments..
Donepart R8-2Rs Bearing Is Engineered With A Radial Deep Groove Ball Bearing Design, Allowing For Efficient Operation And Smooth Performance In Various Applications..
Features
- 1/2 inch Bore Bearing: R8-2RS bearing size: Inner Diameter: 0.5 inches (12.7 mm); Outer Diameter: 1.125 inches (28.575 mm); Width: 0.3125 inches (7.938 mm).
- Donepart R8-2RS bearing is engineered with a radial deep groove ball bearing design, allowing for efficient operation and smooth performance in various applications.
- Double rubber sealed shields on both sides of the bearing to keep lubricant in and contaminants out, lubricated at manufacturer for no additional lubrication required. Verify that the shaft and housing are properly sized and aligned to accommodate the R8-2RS bearing before installation.
- Material: Made of 100% alloy steel material as compared to carbon steel. make it long usage life and improves its machinability. Designed to withstand wear and tear, offering prolonged service life and reduced maintenance requirements. This feature ensures consistent performance over time, even in challenging environments.
- Wide Range of Applications: Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool Industrial Production and More.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.31 x 1.13 x 0.50 Inches | Weight: 0.02 pounds
Warranty: 1 year warranty
See On Amazon #2
Donepart R16-2RS Bearings, 1 Inch ID x2 Inch OD x1/2" Thick C3 High Speed Pre-Lubricated and Double Rubber Sealed Ball Bearings for Machinery, Automotive Components, and Industrial Equipment. (2 Pack)
Asin: B086PVD4XH | Model: R16-2RS | PartNumber: R16-2RS | Ean: 0778112759771 | UPC: 778112759771
Smooth Operation: Precision-Engineered For Low Friction And Minimal Noise, Ensuring Smooth And Quiet Operation, Reducing Energy Consumption..
Long Service Life: With Proper Installation And Maintenance, Offers A Long Service Life, Minimizing Downtime And Maintenance Costs..
Versatile Applications: Suitable For A Wide Range Of Applications, Including Machinery, Automotive Components, And Industrial Equipment..
Easy Installation: Simple To Install And Integrate Into Existing Systems, Facilitating Maintenance And Replacement Procedures..
Double Sealed: Equipped With Rubber Seals (2Rs) On Both Sides For Enhanced Protection Against Contaminants And Moisture Ingress, Prolonging Bearing Life..
High-Quality Construction: Crafted From Premium-Grade Materials, 100% Chrome Steel Ensuring Durability And Reliability In Various Applications..
Features
- R16-2rs Optimized Size: With an inner diameter of 1 inch, outer diameter of 2 inches, and width of 0.5 inches, it's suitable for moderate radial loads and high-speed operations.
- High-Quality Construction: Crafted from premium-grade materials, 100% chrome steel ensuring durability and reliability in various applications.
- Smooth Operation: Precision-engineered for low friction and minimal noise, ensuring smooth and quiet operation, reducing energy consumption.
- Double Sealed: Equipped with rubber seals (2RS) on both sides for enhanced protection against contaminants and moisture ingress, prolonging bearing life.
- Versatile Applications: Suitable for a wide range of applications, including machinery, automotive components, and industrial equipment.
- Easy Installation: Simple to install and integrate into existing systems, facilitating maintenance and replacement procedures.
- Long Service Life: With proper installation and maintenance, offers a long service life, minimizing downtime and maintenance costs.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 1.00 x 2.00 x 0.50 Inches | Weight: 0.49 pounds
See On Amazon #3
Donepart 100 Pack 608-2RS Skateboard Bearings, C3 High Speed Sealed Bearings for Electric Motor, Skateboards, Scooters, Longboard, 3D Printer, Wheel Hub
Asin: B07X37M63J | Model: 608-2RS | PartNumber: 608-2RS
Ideal For Moderate Load Uses: Motor, 3D Printer, Skateboards, Inline Skates, Scooters, And Other Skating Applications..
This Type Of Bearing Has Small Friction Coefficient, High Speed Limit, Simple Structure, Low Manufacturing Cost And Easy To Achieve High Manufacturing Precision..
Our 608-2Rs Bearings Shields On Both Sides Keeping Lubricant In And Contaminants Out..
Material: 100% Chrome Steel, Not Carbon Steel. Durability And Resistance To Deformity Under Heavy Loads..
Features
- 608-2RS ball bearing 8x22x7mm, rubber sealed deep groove.
- Material: 100% chrome steel, not carbon steel. Durability and resistance to deformity under heavy loads.
- Ideal for moderate load uses: Motor, 3d printer, skateboards, inline skates, scooters, and other skating applications.
- Our 608-2RS bearings Shields on both sides keeping lubricant in and contaminants out.
- This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing precision.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.31 x 0.87 x 0.28 Inches | Weight: 0.03 pounds
Warranty: 1 Year Warranty
See On Amazon #4
Donepart 6202RS Bearings 15mm ID, 35mm OD, 11mm Thick 6202-2RS C3 High Speed Deep Groove Sealed Beairngs for Motors, Electric Tools, Garden Machinery, etc. (4 Pack)
Asin: B07XP7D2LY | Model: 6202-2RS | PartNumber: 6202-2RS
【Advantage】: 6202-2Rs Sealed Bearings With Small Friction And High-Limit Speed, Ball Bearings Are Cost-Effective And Require Little Maintenance..
【Application】: Suitable For Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production And More..
Note: Please Make Sure The Size Before Your Purchasing. This Item Size Is 15Mm Id, 35Mm Od, 11Mm Thick.
【Durable Use】: Ball Bearing Has Uniform Hardness And Wear Resistance, High Temperature Resistance, And Double Shielded To Avoid Contaminants Entering ,Save Lubricant.
【High Quality】: These Miniature Bearings Are Made Of High Quality Bearing Steel For Long Service Life, With Polished Smooth Surface, High Efficiency And Low Noise.
Features
- Model : 6202-2RS Sealed Bearings, 15x35x11mm. Single row double sided seal, Deep Groove Raceway bearing steel, rubber cover.
- High Quality : These miniature bearings are made of high quality bearing steel for long service life, with polished smooth surface, high efficiency and low noise
- Advantage : 6202-2RS Sealed Bearings With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
- Durable Use : Ball bearing has uniform hardness and wear resistance, high temperature resistance, and double shielded to avoid contaminants entering ,save lubricant
- Application : Suitable for Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production and More.
- Note: Please make sure the size before your purchasing. This item size is 15mm ID, 35mm OD, 11mm Thick
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.59 Inches | Weight: 0.44 Pounds
See On Amazon #5
Donepart 608-2RS Bearing, 608 Bearings, C3 High Speed 8mmx22mmx7mm Bearings, Double Sealed Small Bearings for Fidget Spinner, Skateboards, Scooter, 3D Printer, etc (20pack)
Asin: B07X2YCNRR | Model: 608-2RS | PartNumber: 608-2RS
Machine Polished Inner & Outer Race For The Ultimate In Smooth High Speed Rolling.
Ideal For Moderate Load Uses: Skateboards, Inline Skates, Scooters, Inline Blade Electric Motors, Wheels Of Bicycle, Motorcycle, Electric Hand Power Tool Ect. In Many Other Rolling Applications.
Deep Groove Ball Bearings Are One Of The Most Widely Used Rolling Bearings. They Are Used To Accommodate Radial And Axial Loads In Both Directions..
Bearing Material: The 608 Bearing Is Made Of High Quality Chrome Steel (Not Carbon Steel) For Durability And Resistance To Deformity Under Heavy Loads..
Features
- 608-2RS bearing: (I.D.=8mm, O.D.=22mm, Thickness=7mm)
- Bearing Material: The 608 bearing is made of high quality chrome steel (not carbon steel) for durability and resistance to deformity under heavy loads.
- Machine polished inner & outer race for the ultimate in smooth high speed rolling
- Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power tool ect. in many other rolling applications
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.28 x 0.00 x 0.00 Inches | Weight: 0.52 Pounds
See On Amazon #6
Donepart R6 2RS Bearings 3/8 ID x 7/8 OD x 9/32 Width Small Bearings Pre-Lubricated and Double Rubber Sealed Bearings (10 Pack)
Asin: B07X93RV9L | Model: R6-2RS | PartNumber: R6-2RS
R6-2Rs Bearings Are Made Of Chrome Steel, Also Are Pre-Lubricated With Grease..
Rolling Bearings Use Rolling Elements To Maintain The Separation Between Moving Parts To Reduce Rotational Friction And Support Radial And Axial Loads..
Ideal For All Kinds Of Industrial Equipment, Micro Motor, Small Rotary Motor, Office Equipment And So On..
The Small Bearings Is Made Of Bearing Steel For Durability And Resistance To Rust, Corrosion And Deformity Under Heavy Loads, And Is Shields On Both Sides Keeping Lubricant In And Contaminants Out..
Features
- R6 Bearing Bore Diameter: 0.375"; Outside Diameter: 0.875"; Width: 0.2812", rubber sealed deep groove.
- The small bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads, and is Shields on both sides keeping lubricant in and contaminants out.
- R6-2RS Bearings are made of Chrome Steel, also are pre-lubricated with grease.
- Ideal for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
- Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.28 x 0.87 x 0.37 inches | Weight: 0.22 pounds
Warranty: 1 Year Warranty
See On Amazon #7
Donepart Bearings 5/8" IDx 1-3/8" ODx .433" Thick 99502H-2RS Double Rubber Sealed Bearings for Go Kart, Mini Bikes, Lawn Mower, Wheels (4 Pack)
Asin: B07X8PL623 | Model: 99502H-2RS | PartNumber: 99502H-2RS
Lubricated At Manufacturer For No Additional Lubrication Required. Crafted From Premium-Grade Materials, 99502H-2Rs Bearings Ensure Durability And Reliability In Diverse Applications..
Easy Installation: Slide The 99502H-2Rs Bearing Onto The Shaft, Ensuring It Seats Properly. Secure The Bearing Using Appropriate Retaining Methods And Verify Smooth Rotation For Proper Alignment.
This Type Of Bearing Has Small Friction Coefficient, High Speed Limit, Simple Structure, Low Manufacturing Cost And Easy To Achieve High Manufacturing Precision..
Radial Deep Groove Ball Bearing Design: The 99502H-2Rs Bearings Feature A Radial Deep Groove Ball Bearing Design, Facilitating Smooth And Efficient Operation..
Fitment: 99502H Radial Ball Bearing For Mower Go Kart Replaces Mtd 741-0155 941-0155 /Prime Line 7-04199 7-044294 /Ariens 54039 54351 05403900 05435100 /Troy-Bilt 1185169 941-0155 /Walker 5037-1 /Yazoo 204-020.
Equipped With Rubber Seals (2Rs), The 99502H-2Rs Bearings With Rubber Seals On Both Sides Of The Bearing To Keep Lubricant In And Contaminants Out. Prolonging Bearing Life..
Features
- Optimized Size: With inner diameter of 0.625 inches, outer diameter of 1.375 inches, width of 0.433 inches, 99502H-2RS bearings are suitable for moderate radial loads and high-speed operations.
- Equipped with rubber seals (2RS), the 99502H-2RS bearings with rubber seals on both sides of the bearing to keep lubricant in and contaminants out. prolonging bearing life.
- Lubricated at manufacturer for no additional lubrication required. Crafted from premium-grade materials, 99502H-2RS bearings ensure durability and reliability in diverse applications.
- Fitment: 99502H Radial Ball Bearing For Mower Go Kart Replaces MTD 741-0155 941-0155 /Prime Line 7-04199 7-044294 /Ariens 54039 54351 05403900 05435100 /Troy-Bilt 1185169 941-0155 /Walker 5037-1 /Yazoo 204-020
- This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing precision.
- Radial Deep Groove Ball Bearing Design: The 99502H-2RS bearings feature a radial deep groove ball bearing design, facilitating smooth and efficient operation.
- Easy Installation: Slide the 99502H-2rs bearing onto the shaft, ensuring it seats properly. Secure the bearing using appropriate retaining methods and verify smooth rotation for proper alignment
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 1.38 x 0.63 x 0.43 Inches | Weight: 0.09 Pounds
Warranty: 1 Year Warranty
See On Amazon #8
UCFL205-16 Pillow Block Bearing, Flange-Mount Ball Bearing Unit, 1 in Bore, 2-Bolt Flange, Self Aligning Cast Iron Housing, Set Screw Locking Style Flange Pillow Block Bearing
Asin: B09TS7FJGK | Model: UCFL205-16 | PartNumber: UCFL205-16
Cast Iron Housing: Donepart Pillow Block Bearing Made Of Cast Iron, Providing Pillow Blocks Rugged And Durable..
Easy Installation : 2 Hole Mounting Design Makes Installation Easy Even In Tight Places, Easily Greasable..
Set Screw Style Pillow Block Bearings: Set Screw Design Ensures Built For Long Life With Simple Installation And Maintenance..
Bearing Size: Ucfl205-16 Is 1 Inch Shaft Diameter Set Screw Style Pillow Block Bearing. With Mount Hole Is 0.6299Inch.
Features
- UCFL205-16 Pillow Block Bearing: To choose the right pillow block bearing suitable for your application, donepart bearing offer a variety of pillow block bearing for tough and unconventional applications.
- Bearing Size: UCFL205-16 is 1 Inch Shaft Diameter Set Screw Style Pillow Block Bearing. With Mount Hole is 0.6299inch
- Cast Iron housing: Donepart pillow block bearing made of cast iron, providing pillow blocks rugged and durable.
- Set Screw Style Pillow Block Bearings: Set screw design ensures built for long life with simple installation and maintenance.
- Easy Installation : 2 hole mounting design makes installation easy even in tight places, easily greasable.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 1.40 x 5.11 x 2.67 Inches | Weight: 2.59 pounds
See On Amazon #9
Donepart 5x11x4mm MR115-2RS Bearings Width Miniature Small Bearings Pre-Lubricated and Double Rubber Sealed (20 Pcs)
Asin: B07X6DK946 | Model: MR115-2RS | PartNumber: MR115-2RS
Donepart Bearings Advantage: Mr115-2Rs Sealed Bearings With Small Friction And High-Limit Speed, Ball Bearings Are Cost-Effective And Require Little Maintenance..
Application: Suitable For Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production And More..
Mr115-2Rs Bearing Durable Use: Ball Bearing Has Uniform Hardness And Wear Resistance, High Temperature Resistance, And Double Shielded To Avoid Contaminants Entering ,Save Lubricant.
Premium High Quality Ball Bearings: These Miniature Bearings Are Made Of High Quality Bearing Steel For Long Service Life, With Polished Smooth Surface, High Efficiency And Low Noise.
Features
- Bearing Model: MR115-2RS Sealed Bearings, 20x47x14mm. Single row double sided seal, Deep Groove Raceway bearing steel, rubber cover.
- Premium High Quality Ball Bearings: These miniature bearings are made of high quality bearing steel for long service life, with polished smooth surface, high efficiency and low noise
- Donepart Bearings Advantage: MR115-2RS Sealed Bearings With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
- MR115-2RS Bearing Durable Use: Ball bearing has uniform hardness and wear resistance, high temperature resistance, and double shielded to avoid contaminants entering ,save lubricant
- Application: Suitable for Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production and More.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.01 Pounds
Warranty: 1 Year Warranty
See On Amazon #10
Donepart 6203RS Ball Bearings 17mm ID 40mm OD 12mm Width C3 High Speed 6203-2RS Sealed Bearings for Electric Motor, Pool Pump, Wheels, Bike, Mower (4 Pack)
Asin: B07X5FV3QS | Model: 6203-2RS | PartNumber: 6203-2RS
Machine Polished Inner & Outer Race For The Ultimate In Smooth High Speed Rolling..
Rolling Bearings Are Used In A Range Of Applications From Agricultural Machinery To Conveying Equipment, Robotics, Dental Equipment, Elevators, Rolling Mills, Ship Rudder Shafts, And Aggregate Crushers, Among Others..
High Temperature-Resistant Bearing:100°C--800°C.It Can Been Applied In Kiln,Plastic,Steel And Other Equipments That Can Bear High Temperature.
Made Of High Quality Bearing Steel And The Lifespan Is Longer Than Carbon Steel, Saving You Maintenance Costs And Avoiding Frequent Replacement..
Features
- 6203-2RS Deep Groove Ball Bearing, Single Row, Double Shielded, Pressed Steel Cage, Normal Clearance, Metric, 17mm Bore, 40mm OD, 12mm Width.
- Made of high quality bearing steel and the lifespan is longer than carbon steel, saving you maintenance costs and avoiding frequent replacement.
- Machine polished inner & outer race for the ultimate in smooth high speed rolling.
- High temperature-resistant bearing:100 C--800 C.It can been applied in kiln,plastic,steel and other equipments that can bear high temperature
- Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.13 pounds
See On Amazon #11
Donepart 6000 ZZ Bearings 10mm ID, 26mm OD, 8mm Width ABEC3 High Speed Double Metal Shielded Bearings for Motor, Wheels, Bicycle, Home Appliances, etc. (4 Pack)
Asin: B07XJPJRN8 | Model: 6000ZZ Bearings | PartNumber: 6000ZZ Bearings
Chrome Steel For Durability And Resistance To Deformity Under Heavy Loads.
Lubricated At Manufacturer For No Additional Lubrication Required.
Metal Shields On Both Sides Of The Bearing To Keep Lubricant In And Contaminants Out.
Deep Groove Geometry For High Speeds And Supporting Both Radial And Axial Loads.
Features
- Model: 6000 ZZ Bearings, size: 10x26x8mm
- Deep groove geometry for high speeds and supporting both radial and axial loads
- Chrome steel for durability and resistance to deformity under heavy loads
- Metal shields on both sides of the bearing to keep lubricant in and contaminants out
- Lubricated at manufacturer for no additional lubrication required
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 pounds
See On Amazon #12
Donepart 6205 Bearings, 6205RS High Precision Bearings, 25mm x52mm x15mm 6205-2RS, Double Rubber Sealed Deep Groove Ball Bearings (10pcs)
Asin: B07XKTNXW8 | Model: 6205-2RS Bearings | PartNumber: 6205-2RS Bearings
Id 25Mm X Od 52Mm X Total Height 15Mm Note: Please Kindly Check The Size Before Purchase..
Application: Widely Used In Industrial Machine, Motorcycle, Automobile, Power Tools And Mechanical Equipment And Other Kinds Of Field..
This Ball Bearing Has Deep Groove Geometry For High Speeds, Supporting Both Radial And Axial Loads; Double Seal Help To Save Grease And Effectively Protect Grease From Impurities; Smooth Rotation With Low Vibration, Durable In Use..
Made Of High Quality Chrome Steel With Double Seal, Pre-Lubricated/Greased From The Manufacturer, Low Friction Coefficient And Stable Performance..
Features
- Universal, work on agricultural machinery, elevators, robotics, dental equipment, rolling mills, aggregate crushers, ship rudder shafts, and many other industries.
- Made of high quality chrome steel with double seal, pre-lubricated/greased from the manufacturer, low friction coefficient and stable performance.
- ID 25mm x OD 52mm x Total Height 15mm NOTE: Please kindly check the size before purchase.
- This ball bearing has deep groove geometry for high speeds, supporting both radial and axial loads; Double seal help to save grease and effectively protect grease from Impurities; Smooth rotation with low vibration, durable in use.
- Application: Widely used in industrial machine, motorcycle, automobile, power tools and mechanical equipment and other kinds of field.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.26 Pounds
See On Amazon #13
Donepart 4 Pcs 6203 ZZ Bearings ABEC3 High Speed Double Shielded Deep Groove Ball Bearings 17mm x40mm x 12mm for Motor, Wheels, Home Appliances, Garden Machinery, etc.
Asin: B07XFNSRJB | Model: 6203ZZ | PartNumber: 6203ZZ
Double Side Metal Sealed Ball Bearing, Waterproof And Dustproof..
Widely Used For Machine Tool, Electronic Equipment, Pump Industry, Motor And More..
The Ball Bearing Can Work Stably Under High Speed..
The Deep Groove Design Provides More Accurate Pathway For The Balls..
Features
- Made of high quality bearing steel, wear resistant, anti-impact and durable.
- The deep groove design provides more accurate pathway for the balls.
- Double side metal sealed ball bearing, waterproof and dustproof.
- The ball bearing can work stably under high speed.
- Widely used for machine tool, electronic equipment, pump industry, motor and more.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.67 x 1.57 x 0.47 Inches | Weight: 0.13 Pounds
See On Amazon #14
4 Pcs R8-2RS Bearings 1/2" ID x1-1/8" OD x 5/16" Thick Small Bearings Double Rubber Sealed Miniature Ball Bearing for Motor, Bicycle, DIY, Garden Machinery, etc.
Asin: B085MFYP18 | Model: R8-2RS | PartNumber: R8-2RS
Metal Shields On Both Sides Of The Bearing To Keep Lubricant In And Contaminants Out, Lubricated At Manufacturer For No Additional Lubrication Required.
Wide Range Of Applications: Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production And More..
This Metal Bearing Shields On Both Sides Keeping Lubricant In And Contaminants Out. Pre-Lubricated For No Additional Lubrication Required..
Deep Groove Geometry For High Speeds And Supporting Both Radial And Axial Loads.
Features
- Model: R8-2RS deep groove ball bearings. 1/2 inches x 1-1/8 inches x 5/16 inches
- Deep groove geometry for high speeds and supporting both radial and axial loads
- Metal shields on both sides of the bearing to keep lubricant in and contaminants out, lubricated at manufacturer for no additional lubrication required
- This metal bearing Shields on both sides keeping lubricant in and contaminants out. Pre-Lubricated for no additional lubrication required.
- Wide Range of Applications: Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production and More.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.31 x 1.12 x 0.50 inches | Weight: 0.18 Pounds
See On Amazon #15
Donepart 1" ID x 2" OD Bearing Garage Door Torsion Spring Center Bearings Deep Groove Ball Bearings with Snap Ring, 2 Pcs
Asin: B0869LBBX4 | Model: 1641NR-2RS | PartNumber: 1641NR-2RS
Our High-Quality Bearing Is Made To Reduce Your Replacement Frequency And Maintenance Cost.
Fit For Lawn Mower, Wheelbarrows, Garden Carts, Generators, Pressure Washers, Air Compressors, Hand Trucks And More.
Ball Bearing Has The Advantages Of Low Noise, Fast Heat Dissipation, Low Friction, High Speed And High Temperature Resistance..
100% Dimensional Tolerance Detection To Ensure Optimum Install Suitability..
Features
- Suit for Shaft diameter 1" and hubs wheels diameter 2"
- 100% Dimensional Tolerance Detection to Ensure Optimum Install Suitability.
- Our high-quality bearing is made to reduce your replacement frequency and maintenance cost
- Ball bearing has the advantages of low noise, fast heat dissipation, low friction, high speed and high temperature resistance.
- Fit for Lawn Mower, Wheelbarrows, Garden Carts, Generators, Pressure Washers, Air Compressors, Hand Trucks and More
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.53 pounds
See On Amazon #16
Donepart 6001-2RS Ball Bearing 6001 Bearing Small Bearing 12mm ID 28mm OD 8mm Width ABEC3 High Speed Double Sealed Bearings for Electric Motor, Wheels, Bike, Mower, Spinners (2 Pack)
Asin: B07XDXFLJJ | Model: 6001-2RS | PartNumber: 6001-2RS
Good Quality: These Ball Bearings Are Using High Quality Bearing Steel. Its Steel Construction Makes It Durable And Resistant To Deformation Under Heavy Loads..
Performance ,Quiet And Cost-Effective, Double-Sealed And Pre-Lubricated, Deep Groove Ball Bearings..
Application: Widely Used In Industrial Machine, Motorcycle, Automobile, Power Tools And Mechanical Equipment And Other Kinds Of Field..
Performance: Donepart Ball Bearing Have The Advantages Of Low Noise, Fast Heat Dissipation, Low Friction, High Speed And High Temperature Resistance..
Features
- Rubber seal: Made of chrome steel, this bearing is sealed with rubber seals to protect the bearing from dust or any possible contamination.
- Performance: Donepart ball bearing have the advantages of low noise, fast heat dissipation, low friction, high speed and high temperature resistance.
- Good quality: These ball bearings are using high quality bearing steel. Its steel construction makes it durable and resistant to deformation under heavy loads.
- Application: Widely used in industrial machine, motorcycle, automobile, power tools and mechanical equipment and other kinds of field.
- Performance ,Quiet and Cost-Effective, Double-Sealed and Pre-Lubricated, Deep Groove Ball Bearings.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.31 x 1.10 x 0.47 inches | Weight: 0.05 pounds
See On Amazon #17
Donepart 6202RS Bearings 6202 2RS ABEC3 High Speed Deep Groove Double Rubber Sealed Bearings 15mm x35mm x11mm (2pcs)
Asin: B07X42V957 | Model: 6202-2RS | PartNumber: 6202-2RS
Closed With 2 Rubber Sealed To Protect The Bearing From Dust Or Any Possible Contamination..
Deep Groove Geometry For High Speeds And Supporting Both Radial And Axial Loads..
With Less Coefficient Of Friction, Less Vibration And Noise,Rotate Quiet High Speed And Durable..
Commonly Used For Clutches, Drives, Gearboxes, Compressors, Pumps, Turbines, And Printing And Textile Machines, Among Others..
Features
- 6202-2RS Bearings Dimensions: 15x35x11 mm / 0.59" x 1.38" x 0.43" standard bearings, cost-effective the best and stable performance
- Commonly used for clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.
- Closed with 2 rubber sealed to protect the bearing from dust or any possible contamination.
- With less coefficient of friction, less vibration and noise,rotate quiet high Speed and durable.
- Deep groove geometry for high speeds and supporting both radial and axial loads.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.59 Inches | Weight: 0.22 Pounds
See On Amazon #18
Donepart Small Bearings 4mm x10mm x4mm MR104 2RS Minature Ball Bearings Double Metal Shielded for Mini Motors, Fidget Spinners, Industrial Machinery, etc (10 Pack)
Asin: B07XDZLWHQ | Model: MR104-2RS | PartNumber: MR104-2RS
Fitted With Two Rubber Dust Seal To Prevent Ingress Of Dirt, Water And Foreign Matter..
Suitable For Micro Motor,Small Rotary Motor,Office Equipment And So On..
Features: Simple Configuration, High Precision,Less Coefficient Of Friction..
Miniature Single Row Deep Groove Ball Bearing..
Features
- Made of Bearing Steel for durability and resistance.
- Miniature Single Row Deep Groove Ball Bearing.
- Fitted with two rubber dust seal to prevent ingress of dirt, water and foreign matter.
- Features: simple configuration, high precision,less coefficient of friction.
- Suitable for micro motor,small rotary motor,office equipment and so on.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.39 x 0.16 Inches | Weight: 0.02 Pounds
See On Amazon #19
Donepart 99502HNR Ball Bearings 5/8"x1-3/8"x7/16" Double Sealed Rubber Pre-Lubricated with Snap Ring for Motor, Mini Bike, Lawn Mower, Go Kart, Wheelbarrows, Cart Trucks 1.59 x 35 x 11 mm (10 Pack)
Asin: B07X5FXTB3 | Model: 99502HNR | PartNumber: 99502HNR
Go Kart Bearings: 99502Hnr Sealed Bearings With Small Friction And High-Limit Speed, Ball Bearings Are Cost-Effective Robust In Operation And Require Little Maintenance..
Application: Suitable For Go Karts, Lawn Mower, Mini Bikes..
Bike Wheel Bearings: Ball Bearing Has Uniform Hardness And Wear Resistance, High Temperature Resistance, And Double Shielded To Avoid Contaminants Entering ,Save Lubricant.
High Quality: These Miniature Bearings Are Made Of High Quality Bearing Steel For Long Service Life, With Polished Smooth Surface, High Efficiency And Low Noise.
Features
- Size: 99502HNR Go Karts Wheel Bearings, ID 5/8" x OD 1-3/8" x Width 7/16" 5/8mm x 35mm x 11mm.
- High Quality: These miniature bearings are made of high quality bearing steel for long service life, with polished smooth surface, high efficiency and low noise
- Go kart bearings: 99502HNR Sealed Bearings With small friction and high-limit speed, Ball Bearings are cost-effective robust in operation and require little maintenance.
- Bike wheel bearings: Ball bearing has uniform hardness and wear resistance, high temperature resistance, and double shielded to avoid contaminants entering ,save lubricant
- Application: Suitable for Go Karts, Lawn Mower, Mini Bikes.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.43 x 1.38 x 0.02 inches | Weight: 0.08 Pounds
Warranty: 1 Year Warranty
See On Amazon #20
Donepart 6200RS Bearings 10mm ID 30mm OD 9mm Width 6200-2RS 6200 Bearings ABEC3 High Speed Doubel Sealed Bearings (10pcs)
Asin: B07X7Z7ZX2 | Model: 6200-2RS | PartNumber: 6200-2RS
6200-2Rs Roller Bearings Are One Of The Most Widely Used Rolling Bearings. They Are Used To Accommodate Radial And Axial Loads In Both Directions..
Suitable For All Kinds Of Home Applications, Industrial Equipment, Micro Motor, Small Rotary Motor, Office Equipment And So On..
Chromium Steel Made With Heat Treating, Provides High And Uniform Hardness, Good Wear Resistance, And High Contact Fatigue Performance..
This Metal Bearing Seals On Both Sides Keeping Lubricant In And Contaminants Out..
Features
- Model: 6200-2RS ball bearings, Inner Dia.=10mm, Outer Dia.=30mm, Thickness=9mm.
- This metal bearing seals on both sides keeping lubricant in and contaminants out.
- 6200-2RS roller bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- Chromium Steel made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
- Suitable for all kinds of home applications, industrial equipment, micro motor, small rotary motor, office equipment and so on.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.35 x 0.00 x 0.39 inches | Weight: 0.07 pounds
Warranty: 1 Year Warranty
See On Amazon #21
R1038-2RS Precision Miniature Ball Bearing 3/8" x 5/8" x 5/32" inch Deep Groove Ball Bearing with Both Sides Rubber Sealed and pre-Lubricated with Grease
Asin: B08LBP7KJG | Model: R1038-2RS-10 | PartNumber: R1038-2RS-10 | Ean: 0779776302907 | UPC: 779776302907
R1038-2Rs Bearing Size: Bearing Inner Diameter: 3/8" Inch, Outer Diameter: 5/8" Inch, Bearing Width: 5/32" Inch.
Widely Application : Electric Motors, Power Tools, Medical Equipment, Robotic Systems, Cnc Machinery, Fan, Align Helicopter, Hobby, Rc Helicopters, Rc Planes, Rc Trucks, Rc Cars, Beam Ball Bearing And Much More..
Packing: 10 Bearings In One Plastic Tube.
Material: Made Of Chrome Steel Manufacturing, Can Deliver High Performance And High Load Capacity..
Features
- R1038-2RS Bearing: Precision miniature ball bearing both sides rubber sealed and pre-lubricated with Grease.
- Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
- R1038-2RS Bearing Size: Bearing Inner Diameter: 3/8 inch, Outer Diameter: 5/8 inch, Bearing Width: 5/32 inch
- Packing: 10 bearings in One plastic tube
- Widely Application : Electric Motors, Power Tools, Medical Equipment, Robotic systems, CNC Machinery, Fan, Align Helicopter, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing and much more.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.15 x 0.62 x 0.37 Inches | Weight: 0.07 Pounds
See On Amazon #22
Donepart 30 Pcs 608RS Bearings 608-2RS ABEC3 High Speed Miniature Bearings 8mmx22mmx7mm for Skateboards, Motors, Wheels, Scooters, 3D Printer, Long Boards, etc.
Asin: B07X8PHWMV | Model: 608-2RS Bearing | PartNumber: 608-2RS Bearing
Machine Polished Inner & Outer Race For The Ultimate In Smooth High Speed Rolling.
Ideal For Moderate Load Uses: Skateboards, Inline Skates, Scooters, Inline Blade Electric Motors, Wheels Of Bicycle, Motorcycle, Electric Hand Power Tool Ect. In Many Other Rolling Applications.
Deep Groove Ball Bearings Are One Of The Most Widely Used Rolling Bearings. They Are Used To Accommodate Radial And Axial Loads In Both Directions..
The Bearing Is Made Of High Quality Chrome Steel (Not Carbon Steel) For Durability And Resistance To Deformity Under Heavy Loads..
Features
- 608-2RS (I.D.=8mm, O.D.=22mm, Thickness=7mm)
- The bearing is made of high quality chrome steel (not carbon steel) for durability and resistance to deformity under heavy loads.
- Machine polished inner & outer race for the ultimate in smooth high speed rolling
- Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power tool ect. in many other rolling applications
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.28 x 0.00 x 0.00 Inches
See On Amazon #23
R166 ZZ Bearing, ID 3/16 inch x OD 3/8 inch x 1/8 inch Miniature Ball Bearing, Metal Shielded and Pre-Lubricated with Grease, 3/16 inch Precision Roller Bearing (10 Pack)
Asin: B08M91XQP3 | Model: R166 ZZ Bearing | PartNumber: R166 ZZ Bearing | Ean: 0779776303188 | UPC: 779776303188
Bearing Material: Made Of Chrome Steel Manufacturing, Can Deliver High Performance And High Load Capacity..
Designed For Many Types Of Applications: Hand Piece, Hobby, Rc Helicopters, Rc Planes, Rc Trucks, Rc Cars, Beam Ball Bearing.
R166-Zz Bearing Sizes: Id 3/16" X Od 3/8" X W 1/8" Inches. The High Accuracy Of The Bearings Enables Excellent High-Speed Performance..
Low Frictional And Irregular Torque Ensure Highly Efficient Power Transmission And Smooth Rotating Performance..
Features
- R166-ZZ Bearing: Both Sides Metal Shielded and pre-Lubricated with Grease, this bearing can effectively save grease,extending the life of machine.
- Low frictional and irregular torque ensure highly efficient power transmission and smooth rotating performance.
- Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
- R166-ZZ Bearing Sizes: ID 3/16 x OD 3/8 x W 1/8 Inches. The high accuracy of the bearings enables excellent high-speed performance.
- Designed for many types of applications: Hand Piece, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.13 x 0.37 x 0.19 Inches | Weight: 0.00 Pounds
See On Amazon #24
R188-ZZ Bearing, 1/4 Inch x 1/2 Inch x 3/16 Inch, Both Sides Metal Shielded and Pre-Lubricated with Grease, Radial Miniature Ball Bearing Efficient and Durable Bearing for Various Applications
Asin: B08M9LMWXY | Model: R188-ZZ Bearing | PartNumber: R188-ZZ Bearing
Bearing Material: Made Of Chrome Steel Manufacturing, Can Deliver High Performance And High Load Capacity..
Designed For Many Types Of Applications: Metallurgy, Mining, Petroleum, Chemical Industry, Construction Machinery And Other Areas.
R188-Zz Bearing Sizes: Id 1/4" X Od 1/2" X W 3/16 Inches. The High Accuracy Of The Bearings Enables Excellent High-Speed Performance..
Low Frictional And Irregular Torque Ensure Highly Efficient Power Transmission And Smooth Rotating Performance..
Features
- R188-ZZ Bearing: Both Sides Metal Shielded and pre-Lubricated with Grease, this bearing can effectively save grease,extending the life of machine.
- Low frictional and irregular torque ensure highly efficient power transmission and smooth rotating performance.
- Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
- R188-ZZ Bearing Sizes: ID 1/4 x OD 1/2 x W 3/16 Inches. The high accuracy of the bearings enables excellent high-speed performance.
- Designed for many types of applications: metallurgy, mining, petroleum, chemical industry, construction machinery and other areas
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.18 x 0.50 x 0.25 inches | Weight: 0.04 pounds
See On Amazon #25
Donepart 5mm ID 9mm OD 3mm Thick Miniature Bearings MR95ZZ Ball Bearing Double Shielded and Pre-Lubricated Steel Bearings (Pack of 10)
Asin: B07XDXFLJG | Model: MR95ZZ | PartNumber: MR95ZZ
Two Steel Dust Shields To Prevent Ingress Of Dirt And Foreign Matter, High Temperature Resistance..
Mainly Take The Radial Load As Well As Moderate Axial Load..
Features: Simple Configuration,High Speed,Less Coefficient Of Friction,Less Vibration And Noise..
Bearing Made From High Quality Chrome Steel For Durability And Resistance..
Features
- MR95ZZ Miniature Single Row Deep Groove Ball Bearing.
- Bearing made from high quality Chrome Steel for durability and resistance.
- Two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance.
- Features: simple configuration,high speed,less coefficient of friction,less vibration and noise.
- Mainly take the radial load as well as moderate axial load.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.04 pounds
See On Amazon #26
Donepart R3-ZZ Bearing, 3/16 x 1/2 x 0.196 Inches Miniature Ball Bearing, High-Performance R3-ZZ Deep Groove Ball Bearing Double Metal Shielded, R3ZZ Radial Ball Bearing (10 Pack)
Asin: B08M9C2HSX | Model: R3-ZZ Bearing | PartNumber: R3-ZZ Bearing | Ean: 0779776303157 | UPC: 779776303157
Bearing Material: Made Of Chrome Steel Manufacturing, Can Deliver High Performance And High Load Capacity..
Designed For Many Types Of Applications: Hand Piece, Hobby, Rc Helicopters, Rc Planes, Rc Trucks, Rc Cars, Beam Ball Bearing, Plane Wood Cutter.
R3-Zz Bearing Sizes: Id: 3/16"X Od 1/2" X W 10/51". The High Accuracy Of The Bearings Enables Excellent High-Speed Performance..
Deep Groove Ball Bearing: Low Frictional And Irregular Torque Ensure Highly Efficient Power Transmission And Smooth Rotating Performance..
Features
- R3-ZZ Bearing: Both Sides Metal Shielded and pre-Lubricated with Grease, this bearing can effectively save grease,extending the life of machine.
- Deep Groove Ball Bearing: Low frictional and irregular torque ensure highly efficient power transmission and smooth rotating performance.
- Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
- R3-ZZ Bearing Sizes: ID: 3/16x OD 1/2 x W 10/51. The high accuracy of the bearings enables excellent high-speed performance.
- Designed for many types of applications: Hand Piece, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing, plane wood cutter
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.20 x 0.00 x 0.00 Inches | Weight: 0.01 Pounds
See On Amazon #27
Donepart Small Bearings 5mm ID 13mm OD 4mm Width 695ZZ Bearings Double Shielded Miniature Deep Groove Ball Bearings (10 Pack)
Asin: B07X9T9JKM | Model: 695ZZ Bearings | PartNumber: 695ZZ Bearings
Double-Shielded For Enhanced Protection: Equipped With Double Metal Shields (Zz), Our 695Zz Bearings Offer Superior Protection, Ensuring High Performance Even In Challenging Environments..
Versatile Applications: From Small Motors And Rc Vehicles To Robotics And 3D Printers, These Bearings Excel In Diverse Miniature Projects Across Various Industries..
Ball Bearings Special Features: Simple Configuration,High Speed,Less Coefficient Of Friction,Less Vibration And Noise. Mainly Take The Radial Load As Well As Moderate Axial Load..
Bearing Material: 695-Zz Bearing Made From Chrome Steel For Durability, Offer Excellent Strength And Long Usage Life..
Features
- 695ZZ Miniature Bearings: Single row double-shielded deep groove ball bearing, 5mmx13mmx4mm.
- Bearing Material: 695-ZZ Bearing made from chrome steel for durability, offer excellent strength and long usage life.
- Double-Shielded for Enhanced Protection: Equipped with double metal shields (ZZ), our 695ZZ bearings offer superior protection, ensuring high performance even in challenging environments.
- Ball Bearings Special Features: Simple configuration,high speed,less coefficient of friction,less vibration and noise. Mainly take the radial load as well as moderate axial load.
- Versatile Applications: From small motors and RC vehicles to robotics and 3D printers, these bearings excel in diverse miniature projects across various industries.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.16 x 0.20 x 0.51 inches | Weight: 0.05 pounds
See On Amazon #28
Donepart 626-2RS Ball Bearings - 6mm Bore ID, 19mm OD, 6mm Width Pre-Lubricated and ABEC3 High Speed Sealed Miniature Bearings (10 Pack)
Asin: B07XDZ6PTB | Model: 626-2RS | PartNumber: 626-2RS
【Advantage】: 626-2Rs Sealed Bearings With Small Friction And High-Limit Speed, Ball Bearings Are Cost-Effective And Require Little Maintenance..
【Application】: Suitable For Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production And More..
【Durable Use】: Ball Bearing Has Uniform Hardness And Wear Resistance, High Temperature Resistance, And Double Shielded To Avoid Contaminants Entering ,Save Lubricant.
【High Quality】: These Miniature Bearings Are Made Of High Quality Bearing Steel For Long Service Life, With Polished Smooth Surface, High Efficiency And Low Noise.
Features
- Model : 626-2RS Sealed Bearings, 6x19x6mm. Single row double sided seal, Deep Groove Raceway bearing steel, rubber cover.
- High Quality : These miniature bearings are made of high quality bearing steel for long service life, with polished smooth surface, high efficiency and low noise
- Advantage : 626-2RS Sealed Bearings With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
- Durable Use : Ball bearing has uniform hardness and wear resistance, high temperature resistance, and double shielded to avoid contaminants entering ,save lubricant
- Application : Suitable for Home Appliances, Garden Machinery, Outdoor Vehicles, Electric Toys & Tool ,Industrial Production and More.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.24 x 0.75 x 0.00 inches | Weight: 0.17 pounds
See On Amazon #29
Donepart 608RS Bearings, 8mm x 22mm x 7mm 608-2RS, C3 Double Sealed Rubber Shielded, Pre-Lubricated Roller Bearing for Fidget Spinner, Scooters, Skateboard, Longboard, 3D Printer (10 Pack)
Asin: B07WZTYG3M | Model: 608-2RS | PartNumber: 608-2RS
Smooth And Quiet Operation: Machine Polished Inner & Outer Race For The Ultimate In Smooth High Speed Rolling.
Ideal For Moderate Load Uses: Skateboards, Inline Skates, Scooters, Inline Blade Electric Motors, Wheels Of Bicycle, Motorcycle, Electric Hand Power Tool Ect. In Many Other Rolling Applications.
Compact And Versatile: Deep Groove Ball Bearings Are One Of The Most Widely Used Rolling Bearings. They Are Used To Accommodate Radial And Axial Loads In Both Directions..
Premium Steel Construction: The 608 Bearing Is Made Of High Quality Chrome Steel (Not Carbon Steel) For Durability And Resistance To Deformity Under Heavy Loads..
Features
- 608-2RS Bearing Size: (I.D.=8mm, O.D.=22mm, Thickness=7mm)
- Premium Steel Construction: The 608 bearing is made of high quality chrome steel (not carbon steel) for durability and resistance to deformity under heavy loads.
- Smooth and Quiet Operation: Machine polished inner & outer race for the ultimate in smooth high speed rolling
- Compact and Versatile: Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
- Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power tool ect. in many other rolling applications
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 0.28 x 0.00 x 0.00 Inches | Weight: 0.28 Pounds
See On Amazon #30
R3-2RS Bearing, Miniature Ball Bearing, 3/16x1/2x0.196 Inches, Both Sides Rubber Sealed and pre-Lubricated with Grease for Motors, Rollers, and Pulleys
Asin: B08LBT8ZXR | Model: R3-2RS-10 | PartNumber: R3-2RS-10 | Ean: 0779776302914 | UPC: 779776302914
R3-2Rs Bearing Size: 3/16 Inch X1/2 Inch X0.196 Inches Compatibility With Various Equipment..
Excellent Load-Bearing Capacity, Capable Of Handling Moderate Radial And Axial Loads With Ease..
Easy Installation And Maintenance, Saving You Time And Effort In Maintenance Tasks..
Reliable And Consistent Performance Even Under Demanding Conditions, Ensuring Optimal Functionality..
Designed For Many Types Of Applications: Markets Bearing, Transmissions, Gearboxes, Belts, Chain And Related Products, And Offers A Spectrum Of Power Train Rebuild And Repair Services Usage. Hand Piece, Hobby, Rc Trucks, Rc Cars, Plane Wood Cutter Etc.
Smooth And Quiet Operation, Delivering Efficient Performance For Your Machinery..
Premuim Quality: With 10 Bearings In One Plastic Tube, Meet Or Exceed Abec3 Tolerances For High Quality Level..
Versatile Compatibility With A Wide Range Of Equipment, Making It A Versatile Choice For Various Applications..
Bearing Material: Made Of Chrome Steel Manufacturing, Can Deliver High Performance And High Load Capacity..
Features
- R3-2RS Bearing: With both rubber sealed, this R3-2RS bearing can effectively save grease,extending the life of machine.
- Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity.
- R3-2RS Bearing Size: 3/16 inch x1/2 inch x0.196 Inches compatibility with various equipment.
- Premuim Quality: With 10 bearings in One plastic tube, Meet or exceed ABEC3 tolerances for high quality level.
- Designed for many types of applications: markets bearing, transmissions, gearboxes, belts, chain and related products, and offers a spectrum of power train rebuild and repair services usage. hand Piece, hobby, RC Trucks, RC Cars, plane wood cutter etc
- Smooth and quiet operation, delivering efficient performance for your machinery.
- Easy installation and maintenance, saving you time and effort in maintenance tasks.
- Reliable and consistent performance even under demanding conditions, ensuring optimal functionality.
- Versatile compatibility with a wide range of equipment, making it a versatile choice for various applications.
- Excellent load-bearing capacity, capable of handling moderate radial and axial loads with ease.
- See more on Amazon...
Brand: Donepart | Manufacturer: Donepart
Dimensions: 1.96 x 0.50 x 1.87 Inches | Weight: 0.04 Pounds
See On Amazon