Ezdiy-Fab - Buying Guide
Last Updated: 04/23/2024
Share on
Bestselling from Ezdiy-Fab on Amazon
- EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control...
- EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Supply/Pow...
- EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use On...
- EZDIY-FAB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holde...
- EZDIY-FAB GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graph...
- EZDIY-FAB USB 2.0 Internal Header (9-Pin) to USB 3.1/3.2 Type-C (20-Pin) A-Key Front Panel 180 Degre...
- EZDIY-FAB Adapter Cable for Corsair RGB HUB, Lighting Node CORE, Commander CORE and iCUE Commander C...
- EZDIY-FAB Vertical GPU Mount with High-Speed PCIE 4.0 Riser Cable, ARGB Module, 115mm/4.52in Flexibl...
- EZDIY-FAB PSU Extension Cable Sleeved Custom Mod PC Power Supply Cable, Soft Nylon Braided with Comb...
- EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Suppo...
#1
EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control,ARGB Fan for PC Case Desktop-6 Pack
Asin: B07XBSKTY6 | Model: US-rgb slim fan with hub X-5P | PartNumber: US-rgb slim fan with hub X-5P
With Ezdiy-Fab Fan Hub X And 21-Key Remote -You Can Instantly Adjusting Led Back-Light Effects, Colors, Brightness And Fan Speed. Note：Maximum Current-5A, Hub-X Only Supports 6 Fans.
Self-Lubricated Bearing And Friction-Reducied Substance Lowers Operation Noise And Enhance Thermal Efficiency.
Equipped With 8 Anti-Vibration Rubber Pads To Effectively Prevent Vibration During Operation, Greatly Reducing Noise And Improving Efficiency..
Sync Rgb Lighting Via Motherboard: Support M/B 3 Pin Rgb Header (5V, Di, -, G),Compatible With Asus Aura, Asrock Rgb, Gigabyte Fusion, Msi Rgb.
Features
- Astonishing lighting effects-Tri-aperture inside and outside luminous light effect,Give out an impact visual light effect.
- Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G),Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB
- With EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjusting LED back-light effects, colors, brightness and Fan speed. NOTE Maximum Current-5A, HUB-X ONLY Supports 6 Fans
- Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reducing noise and improving efficiency.
- Self-lubricated Bearing and friction-reducied substance lowers operation noise and enhance thermal efficiency
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 4.72 x 4.72 x 0.98 inches
See On Amazon #2
EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Supply/Power Adapter for Computer Motherboard -1 Pack
Asin: B096MBK5BX | Model: EZDPI161 | PartNumber: EZDPI161
90 Degrees Right Angle Design, Connecting Between Psu 24 Pin Cable And Motherboard Connector, Does Not Cause Pressure On The Motherboard Connector For Long-Term Stable Use..
This Design Will Solve The Psu Installation For The Limited Height Chassis You Can Install The 24Pin Power Cable From Vertical To Horizontal Direction With This Adapter..
Atx 24-Pin Female To Male Connector 90 Degrees Suitable For Motherboard .Plug And Play Installation..
Built With The Advanced Argb Lighting System , It Features Argb Rainbow Color That Glows Attractively Without Straining Your Eyes ..
Features
- The ATX 24 Pin 90 Adapter is compatible with all ATX motherboards and power supply units that support a standard 24 pin main power connection.
- Built with the advanced ARGB lighting system , it features ARGB Rainbow color that glows attractively without straining your eyes .
- 90 Degrees right angle design, connecting between PSU 24 Pin Cable and motherboard connector, does not cause pressure on the motherboard connector for long-term stable use.
- ATX 24-pin female to male connector 90 degrees suitable for motherboard .Plug and play installation.
- This design will solve the PSU installation for the limited height chassis You can install the 24PIN power cable from vertical to horizontal direction with this adapter.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Weight: 0.07 Pounds
See On Amazon #3
EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header
Asin: B086X6WB4F | Model: US-PWM fan hub | PartNumber: US-PWM fan hub
There Is Eva Double-Sided Adhesive In The Package, Which Can Be Easily Affixed To A Flat Place. Also A Fixing Screw Hole In The Middle Of The Pcb To Facilitate Fixing To A Part Of The Chassis..
If 3-Pin Fans Are Connected To This Fan Hub, This Fan Hub Cannot Give Them Extra Pwm Function. They Will Run At Full Speed..
Direct Computer Power Supply To Reduce The Mainboard Loading Pressure, And Pwm Temperature Control Line Separated From Mainboard To Achieve Both Of Power Supply And Temperature Control..
In The Hub Interfaces, The White Interface Of Fan1 Is The Cpu Fan Dedicated Interface (With Speed Detection Function). Since The Mainboard Can Only Receive One Rotation Speed Signal, The Remaining Nine Conventional Fan Interfaces Have The Pwm Function, But No Speed Signal..
Features
- Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first.
- In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.
- If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #4
EZDIY-FAB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket Support RX6700,RTX3090- 309EZ-Black
Asin: B09466LNV3 | Model: US-309 GPU holder-B | PartNumber: US-309 GPU holder-B
The Universal Design Of The Support Arm Offers Easy Adjustment To Fit A High Range Of Graphics Card And Pc Case Combinations..
Two Kinds Of Rubber Pad Included, Design For Different Cooling Fan Spacing Of Gpu..
Protect The Motherboard, Reduces Stress On Motherboard Pci-E Slot By Supporting The Weight Of Gpu.
Use Sturdy Aluminium Alloy As The Main Structure To Keep In Lightweight And Provide Strong Support.Prevents Gpus From Bending And Sagging After Long Period Of Use..
Features
- Lengthened and Bending shape design for latest big GPU, Supports Nvidia RTX 3000 AMD RX5000/6000 series, Only fits PC case with 7 or more-PCI Slot.
- Use sturdy aluminium alloy as the main structure to keep in lightweight and provide strong support.Prevents GPUs from bending and sagging after long period of use.
- The universal design of the support arm offers easy adjustment to fit a high range of graphics card and PC case combinations.
- Protect the motherboard, reduces stress on motherboard PCI-E slot by supporting the weight of GPU
- Two kinds of rubber pad included, design for different cooling fan spacing of GPU.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #5
EZDIY-FAB GPU VGA PCIe 8 Pin U Turn 180 Degree Angle Connector Power Adapter Board for Desktop Graphics Card-Reverse Type 3-Pack
Asin: B096VB8MB5 | Model: CA-RVS 8Pin Adapter | PartNumber: CA-RVS 8Pin Adapter
180 Degrees U Turn Design, Connecting Between Psu Cable And Gpu Connector, Does Not Cause Pressure On The Gpu Connector For Long-Term Stable Use.
These Adapters Are For Using On Pcie Connectors, Compatible To All Graphics Cards Such As: Asus, Asrock, Evga ,Gigabyte, Radeon, Sapphire, Nvidia, Etc.; Mind The Connector Type Before Purchasing..
Can Install The 8Pin Psu Pcie Cable From Vertical To Horizontal Direction With This Adapter To Fit In Height Limited Chassis.
Package Included 3 Adapters Of Reverse Type Of Connector Interface Adapters, Please Check The Connector Interface Type On Your Gpu Before Purcahsing..
Features
- Designed for changing PCIE 8PIN cable installation direction. Attention to the GPU connector direction before purchasing.
- Package included 3 adapters of Reverse Type of connector interface adapters, Please check the connector interface type on your GPU before purcahsing.
- 180 Degrees U turn design, connecting between PSU Cable and GPU connector, does not cause pressure on the GPU connector for long-term stable use
- Can install the 8pin PSU PCIE cable from vertical to horizontal direction with this adapter to fit in height limited chassis
- These adapters are for using on PCIe connectors, compatible to all graphics cards such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA, etc.; Mind the connector type before purchasing.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Weight: 0.05 pounds
See On Amazon #6
EZDIY-FAB USB 2.0 Internal Header (9-Pin) to USB 3.1/3.2 Type-C (20-Pin) A-Key Front Panel 180 Degrees Adapter, Extend USB Type E Ports to PCs Front Panel USB Ports
Asin: B0B5CHQ33W | Model: EZDPC180 | PartNumber: EZDPC180
Transfer Speed Is Based On Usb 2.0, 9-Pin Usb2.0, Only Usb2.0 Rate Is Transferred Out..
Plug And Play, Its Just An Extension/Port No Need To Install Drivers. Please Off The Power Before Installation..
Can Be Used With Ezdiy-Fab Usb3.1 Cable Or Front Panel Hub, Seacrch B07zhcn2cx, B07zhbt4s6, B078z52y1x, B07dvbrzr9..
Compatible With All Brand Motherboard Usb 2.0 9-Pin Header, Will Works On All Windows And Linux Systems..
180 Degress Connector Interface, Avoid Assembly Interference Caused By The Position Of The Motherboard Connector Or The Internal Structure Of The Chassis..
Features
- Save your old M/Bs, so that it can support the latest USB TYPE-C interface, easy access to USB C devices.
- 180 degress connector interface, avoid assembly interference caused by the position of the motherboard connector or the internal structure of the chassis.
- Transfer speed is based on USB 2.0, 9-Pin USB2.0, only USB2.0 rate is transferred out.
- Compatible with all brand motherboard USB 2.0 9-Pin header, will works on all Windows and Linux systems.
- Plug and Play, its just an extension/port no need to install drivers. Please off the power before installation.
- Can be used with EZDIY-FAB USB3.1 cable or front panel hub, Seacrch B07ZHCN2CX, B07ZHBT4S6, B078Z52Y1X, B07DVBRZR9.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #7
EZDIY-FAB Adapter Cable for Corsair RGB HUB, Lighting Node CORE, Commander CORE and iCUE Commander CORE XT, Smart RGB Lighting, Connect to Any 5V 3-Pin ARGB Devices (2 x 10cm)
Asin: B0C7FNQ6NC | Model: CA-Cor 4P Male adapter | PartNumber: CA-Cor 4P Male adapter
Specifically For Users Of Corsair Rgb Hub And Lighting Node Core, To Assign A Unique Lighting Effect To Your 3-Pin 5V Argb Device Within Icue, Ensure That This Adapter Occupies The Last Port In The Sequence On Your Corsair Rgb Hub Or Lighting Node Core. Otherwise, It Will Replicate The Lighting Effect Of The Next Corsair Fan In The Sequence..
Please Note This Will Only Work With The Corsair Rgb Hub And Lighting Node Core, Commander Core And Icue Commander Core Xt..
Please Note That If You Use Multiple Adapters In Sequence, They Will All Exhibit The Same Lighting Effects..
You Have The Flexibility To Use This Adapter Alongside Splitters And Hubs To Manage Multiple Argb Devices Simultaneously. It's Fully Compatible With The Lian Li Strimer Plus..
Features
- With this adapter, you can seamlessly connect your 3-Pin ARGB devices to Corsair RGB HUB, Lighting Node CORE, Commander CORE, or iCUE Commander CORE XT, enabling precise control through Corsair's exceptional iCUE software.
- You have the flexibility to use this adapter alongside splitters and hubs to manage multiple ARGB devices simultaneously. It's fully compatible with the Lian Li Strimer Plus.
- Specifically for users of Corsair RGB HUB and Lighting Node CORE, to assign a unique lighting effect to your 3-pin 5V ARGB device within iCUE, ensure that this adapter occupies the last port in the sequence on your Corsair RGB HUB or Lighting Node CORE. Otherwise, it will replicate the lighting effect of the next Corsair fan in the sequence.
- Please note that if you use multiple adapters in sequence, they will all exhibit the same lighting effects.
- Please note this will ONLY work with the Corsair RGB HUB and Lighting Node CORE, Commander CORE and iCUE Commander CORE XT.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #8
EZDIY-FAB Vertical GPU Mount with High-Speed PCIE 4.0 Riser Cable, ARGB Module, 115mm/4.52in Flexible Extension, 90 Degree Connector, Only Compatible to Full-Opened PCIe Slots-Black-YIHPI344-2
Asin: B0CP3MWVB9 | Model: YIHPI344-2 | PartNumber: YIHPI344-2
Vertical Display Made Simple And Sturdy: Designed For Effortless Installation, This Mount Enables A Stunning Vertical Presentation Of Your Gpu. The Added Adjustable Support Screw Ensures A Distinctive And Stands Out With Added Stability..
Amazing Argb Lighting: Elevate Your System's Aesthetics With Synchronizable Argb Lighting, Compatible With Leading Software Like Aura, Mystic, And Fusion. Note: This Mount Is Not Compatible With 12V 4-Pin Rgb Headers..
Bidirectional Locking Structure: Constructed With Superior Steel, This Component Is Designed With A Bidirectional Locking Structure, Offering Robust, Multi-Directional Support, Ensuring Heavy Graphics Cards Are Held Firmly In Place..
Precisely Engineered Riser Cable: The Pcie 4.0 Riser Cable Features A Carefully Angled Connector And An Ideal Length Of 115Mm/4.52In, Ensuring A Perfect Fit Without The Risk Of Bending Or Crimping, Thereby Protecting Your Motherboard Connectors From Potential Damage..
Features
- Optimized for Full PCI Slot Cases: Tailored for enclosures with 7 opened PCIe slots, this vertical GPU mount is ideal for RTX40 series; 3-slot graphics cards, requiring a case of minimum of 8 slots for optimal fit and stability.
- Precisely Engineered Riser Cable: The PCIe 4.0 riser cable features a carefully angled connector and an ideal length of 115mm/4.52in, ensuring a perfect fit without the risk of bending or crimping, thereby protecting your motherboard connectors from potential damage.
- Vertical Display Made Simple and Sturdy: Designed for effortless installation, this mount enables a stunning vertical presentation of your GPU. The added adjustable support screw ensures a distinctive and stands out with added stability.
- Bidirectional Locking Structure: Constructed with superior steel, this component is designed with a bidirectional locking structure, offering robust, multi-directional support, ensuring heavy graphics cards are held firmly in place.
- Amazing ARGB Lighting: Elevate your system's aesthetics with synchronizable ARGB lighting, compatible with leading software like AURA, Mystic, and Fusion. Note: This mount is not compatible with 12V 4-pin RGB headers.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #9
EZDIY-FAB PSU Extension Cable Sleeved Custom Mod PC Power Supply Cable, Soft Nylon Braided with Comb Kit 24PIN/8PIN to 6+2Pin/ 8PIN to 4+4PIN-30CM 300MM - All White Edition
Asin: B0BN6TYBLC | Model: CA-16AWG All White comb-4P | PartNumber: CA-16AWG All White comb-4P
High Specification 18 Awg Cables Easily Handle Your Ultra High Power Modular Power Supply, Long-Term Stability And Superior Performance Are The Foundation For Protecting Your Computer..
2X 8-Pin To 6+2-Pin Gpu Power Cables Bundled In One Package. Suitable For Both 6-Pin Or 8-Pin Gpu Configurations. Also Includes 24-Pin Motherboard Power And 4+4-Pin Cpu Power Cables..
Package List: 1X 24-Pin Atx Extension Cable; 1X 8-Pin To (4+4)Pin Eps Cable; 2X 8-Pin To (6+2)Pin Pci-E Cable; Cable Combs Included..
The New Individually Sleeved Cables Are Heat-Shrink Free To Ensure High-Quality Cable Assembly And Support For High Currents In Order To Achieve Superior Performance And Stability..
The Latest Nylon Braid Design, Soft, And Easy To Organize With Vivid Braided Cables For Refined Professional Builds..
Features
- White Cable, White Connector, White Comb for a clean cable management and a uniform design
- The latest Nylon Braid design, soft, and easy to organize with vivid braided cables for refined professional builds.
- High specification 18 AWG cables easily handle your ultra high power modular power supply, long-term stability and superior performance are the foundation for protecting your computer.
- The new individually sleeved cables are heat-shrink free to ensure high-quality cable assembly and support for high currents in order to achieve superior performance and stability.
- 2x 8-Pin to 6+2-Pin GPU power cables bundled in one package. Suitable for both 6-Pin or 8-Pin GPU configurations. Also includes 24-Pin motherboard power and 4+4-Pin CPU power cables.
- PACKAGE LIST: 1x 24-pin ATX Extension Cable; 1x 8-pin to (4+4)pin EPS Cable; 2x 8-pin to (6+2)pin PCI-e Cable; cable combs included.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 0.45 x 13.58 x 2.05 inches | Weight: 0.84 pounds
See On Amazon #10
EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
Asin: B08R9PDBTD | Model: US-3528 RGB GPU Bracket-B-with new riser | PartNumber: US-3528 RGB GPU Bracket-B-with new riser
Designed For Most Atx Case With At Least 7 Pcie Slots In The Market.
Only Supports Pcie 3.0.: If You Intend To Use A Pcie 4.0 Graphics Card, You Will Need To Enter The Bios And Adjust The Pcie Slot To Gen3 Mode, As The Riser Only Supports Pcie 3.0..
With Movable Bracket, More Flexible In Using Pc Case Interior Space. Note: Please Check Your Case With Enough Space.
Note: Ensure The Pcie Cable Is Fully And Securely Inserted Into The Socket! Please Make Sure The Male Connector (Gold Fingers) Is Fully Inserted Into The Motherboard’S Pcie Socket. Our Riser Has A Very Short Pin Designed To Provide Better Insertion Loss. The Pins May Not Be In Full Contact With The Pcie Socket Pins Resulting In Signal Lanes Drop From X16 To X8, Or Worse At X4 Speed..
The 20Cm/7.8In Pcie Riser With High Quality Tpe Cable And Sectional Design Allows Air Ventilation And Lowers Working Temperatures For Better Overall System Performance..
Vertically Display A Gpu Graphics Card, Compatible With Most Brand's Graphic Card, Show Off The Visual Design Of The Gpu And Its Cooler..
Features
- Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
- Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
- Designed for most ATX case with at least 7 PCIE slots in the market
- The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
- With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space
- Note: Ensure the pcie cable is fully and securely inserted into the socket! Please make sure the male connector (Gold Fingers) is fully inserted into the motherboard s PCIe socket. Our riser has a very short pin designed to provide better insertion loss. The pins may not be in full contact with the PCIe socket pins resulting in signal lanes drop from x16 to x8, or worse at x4 speed.
- Only supports PCIe 3.0.: If you intend to use a PCIe 4.0 graphics card, you will need to enter the BIOS and adjust the PCIe slot to Gen3 mode, as the riser only supports PCIe 3.0.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #11
EZDIY-FAB USB 3.0 (USB3.1 Gen 2) Internal Header (19-Pin) to USB 3.1/3.2 Type-C (20-Pin) A-Key Front Panel 180 Degrees Adapter, Extend USB Type E Ports to PCs Front Panel USB Ports
Asin: B0B5D5GZX9 | Model: EZDPC181 | PartNumber: EZDPC181
Data Transfer Speed Is Based On Usb3.0, Its Up To 5Gbps In Max..
Plug And Play, Its Just An Extension/Port No Need To Install Drivers. Please Off The Power Before Installation..
Can Be Used With Ezdiy-Fab Usb3.1 Cable Or Front Panel Hub, Seacrch B07zhcn2cx, B07zhbt4s6, B078z52y1x, B07dvbrzr9..
Compatible With All Brand Motherboard Usb 3.0 19-Pin Header, Will Works On All Windows And Linux Systems..
180 Degress Connector Interface, Avoid Assembly Interference Caused By The Position Of The Motherboard Connector Or The Internal Structure Of The Chassis..
Features
- Save your old M/Bs, so that it can support the latest USB TYPE-C interface, easy access to USB C devices.
- 180 degress connector interface, avoid assembly interference caused by the position of the motherboard connector or the internal structure of the chassis.
- Data transfer speed is based on USB3.0, its up to 5Gbps in max.
- Compatible with all brand motherboard USB 3.0 19-Pin header, will works on all Windows and Linux systems.
- Plug and Play, its just an extension/port no need to install drivers. Please off the power before installation.
- Can be used with EZDIY-FAB USB3.1 cable or front panel hub, Seacrch B07ZHCN2CX, B07ZHBT4S6, B078Z52Y1X, B07DVBRZR9.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #12
EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-5 Pack
Asin: B07XDX8CS5 | Model: US-rgb ring fan with hub X-5P | PartNumber: US-rgb ring fan with hub X-5P
8 Shockproof Pads Ensure That The Fan Will Not Vibrate When It Is Running..
With Ezdiy-Fab Fan Hub X And 21-Key Remote:You Can Instantly Adjusting Led Back-Light Effects, Colors, Brightness And Fan Speed.
Sync Rgb Lighting Via Motherboard:- Must Be Work With An Addressable Rgb(+5V, 3-Pin) Capable Motherboard Or An Addressable Rgb(+5V, 3-Pin) Controller(Please Check The Argb Motherboard Of Your Motherboard Before Purchase!).
9-Fan Blade, Support Speed Regulation, Adjust Brightness, Intelligent Color Matching By Wireless Remote Control..
Features
- 16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations
- 9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control.
- 8 shockproof pads ensure that the fan will not vibrate when it is running.
- Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!)
- With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 4.72 x 4.72 x 0.98 inches
See On Amazon #13
EZDIY-FAB 5V ARGB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Strenchable Structure, Video Card Sag Holder/Holster Bracket Support RX7990XTX, RTX4090, Black-341
Asin: B0BPHKCTGJ | Model: YIHPI341 | PartNumber: YIHPI341
Double Bracket Feet To Provide Superior Stability For Your Graphics Card, With Added Flexibility To Install The Each Feet Separately Or Together For Greater Compatibility With A Range Of Gpu Configurations..
Synchronizable Argb Lighting Via Motherboard: Built With The Advanced Argb Lighting System,Support 5V 3Pin Argb Motherboard Synchronization, Multiple Rgb Modes Can Be Switched,Makes Your Computer Case Colorful.* *Please Never Connect It To 4Pin 12Vrgb..
Experience Durable And Stable Support With Our All-Metal Bracket Structure, Complemented By A Sleek Anodized Sandblasted Aluminum Panel For A Stylish And Sophisticated Look..
Features A Stretchable Design That Provides Up To 30Mm Of Expandable Space, Allowing It To Accommodate Graphics Cards Of Varying Sizes With Ease. Its Expandable Nature Enables It To Adjust Both Inward And Outward To Securely Hold The Graphics Card In Place..
Features
- The Slide Type Support Structure is a flexible mechanism that can support GPUs of different lengths (174-280 mm), providing secure installation and adaptability.
- Features a stretchable design that provides up to 30mm of expandable space, allowing it to accommodate graphics cards of varying sizes with ease. Its expandable nature enables it to adjust both inward and outward to securely hold the graphics card in place.
- Double bracket feet to provide superior stability for your graphics card, with added flexibility to install the each feet separately or together for greater compatibility with a range of GPU configurations.
- Experience durable and stable support with our all-metal bracket structure, complemented by a sleek anodized sandblasted aluminum panel for a stylish and sophisticated look.
- Synchronizable ARGB lighting via motherboard: Built with the advanced ARGB lighting system,support 5V 3PIN ARGB motherboard synchronization, multiple rgb modes can be switched,makes your computer case colorful.* *Please never connect it to 4pin 12VRGB.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #14
EZDIY-FAB NVME PCIe 4.0 Adapter, M.2 NVME SSD to PCI Express Adapter with Heat Sink, Only Support PCIe x16 Slot,Support M.2 SSD 2230 2242 2260 2280
Asin: B07NY25LRD | Model: US-M.2+heatsink cooler-1 | PartNumber: US-M.2+heatsink cooler-1 | Ean: 0713721971800 | UPC: 713721971800
Come With Heat Sink And Thermal Pad, Can Realize Nvme Ssd's Full Potential Of Its High Performance.
If You Would Like To Use Nvme M.2 Ssd As Boot Drive, Please Confirm Your Motherboard Wit Csm Function Before Buying..
Support Windows Xp / 7 / 8 / 10, No Driver Required. Only Support M.2 Nvme Ssd (Key M), Do Not Support M.2 Sata Ssd (Key B).
Supports Pcie Gen4/Gen3 And Pcie Gen2 M.2 Ngff 80Mm, 60Mm, 42Mm Ssd.
Features
- You can use NVME SSD with this adapter without M.2 slot on the motherboard
- Supports PCIe Gen4/Gen3 and PCIe Gen2 M.2 NGFF 80mm, 60mm, 42mm SSD
- Come with heat sink and thermal pad, can realize NVME SSD's full potential of its high performance
- Support Windows XP / 7 / 8 / 10, No driver required. Only Support M.2 NVME SSD (Key M), DO NOT support M.2 SATA SSD (Key B)
- If you would like to use NVME M.2 SSD as boot drive, please confirm your motherboard wit CSM function before buying.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Weight: 0.11 Pounds
See On Amazon #15
EZDIY-FAB GPU Support Bracket,5V 3PIN ARGB Graphics Card Brace, GPU Support Stand Adjustable Height,Aluminum Video Card Sag Holder
Asin: B09NB9MSWF | Model: EZDPI171 | PartNumber: EZDPI171
Easy Installation, No Damage To The Graphics Card, Height Can Be Adjusted According To The Size Of Different Graphics Cards And Pc Case(67Mm/2.63In-106Mm/4.17In Adjustable)..
Featuring With 5V 3Pin Argb Led Lights, Control And Change The Colors By Connecting To Motherboard Or By Other Argb Controller..
With Hidden Magnet Design On Bottom, It Not Only Lets User Install It Easily But Also Stand Firmly Inside The Case..
Aluminum Alloy Material, Sturdy And Not Deformed, Can Be Used For A Long Time Or Repeatedly..
Features
- Updated design Graphics card brace with compact size, light weight, doesn't take up spaces..
- Aluminum alloy material, sturdy and not deformed, can be used for a long time or repeatedly.
- Easy installation, no damage to the graphics card, height can be adjusted according to the size of different graphics cards and PC case(67mm/2.63in-106mm/4.17in adjustable).
- With hidden magnet design on bottom, it not only lets user install it easily but also stand firmly inside the case.
- Featuring with 5V 3pin ARGB LED lights, Control and change the colors by connecting to Motherboard or by other ARGB controller.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #16
EZDIY-FAB ARGB LED AIO Tube Sleeve, Soft Dust Free Rubber, Versatile Sizing 12mm Diameter for Water Cooling Tube, Compatible with Aura, RGB Fusion,Mystic Light Sync- 2 Packs, 330mm/13in
Asin: B0B5CNVHND | Model: EZDPI129-3 | PartNumber: EZDPI129-3
12Mm Diameter Argb Tube Sleeve Fits 11-12Mm Diameter Aio Tube To Create A Personal Lighiting System..
One-Year Warranty. Any Questions For Our Ezdiy Product Both Before And After You Place The Order, Contact Us Anytime, We Will Reply You Within 24 Hours..
1 To 2 Splitter Included, You Could Connect Two Led Strips In Series Or In Palleral; Clip Type Connector Interface Keeps Connection Securely..
Soft Rubber Composition For Easy To Assemble With The Shape Of The Cooler Tubes, With Smooth Texture And Not Easy To Get Dust, Smoothly And Clean..
Features
- Fetured lighting effects with 30 ARGB LEDs compatible with Aura, Fusion RGB and Mystic Light app, also works with standard 5V 3Pin ARGB Controller.
- Soft rubber composition for easy to assemble with the shape of the cooler tubes, with smooth texture and not easy to get dust, smoothly and clean.
- 12mm diameter ARGB tube sleeve fits 11-12mm diameter AIO tube to create a personal lighiting system.
- 1 to 2 splitter included, you could connect two led strips in series or in palleral; clip type connector interface keeps connection securely.
- One-Year Warranty. Any questions for our EZDIY Product both before and after you place the order, contact us anytime, we will reply you within 24 hours.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #17
EZDIY-FAB PCIe 5.0 Adapter - 600W 12+4pin, 16pin 12VHPWR GPU Power Connector, 90 Degree Right Angle - Compatible with RTX 3090Ti, 4070Ti, 4080, 4090 Graphics Cards - RVS Type, Black, 1 Pack
Asin: B0CP3L4NJD | Model: EZDPI189-30 | PartNumber: EZDPI189-30
Adopts A 12V2x6 Specification Connector That Is Also Compatible With The 12Vhpwr Connector, Ensuring Full Contact For Safe Current Delivery, Improving Safety In Power Delivery..
Engineered With A Slimmer Profile, This Adapter Maximizes Compatibility, Accommodating A Broader Range Of Graphics Card Configurations. However, It Is Specifically Not Compatible With The Msi Geforce Rtx 4090 Suprim Liquid X 24G. Please Check Compatible List Before Purchasing..
Reinforced Pcb Features A 2Oz Copper And 4-Layer Board Design, Supporting Superior Heat Dissipation And A 600W Power Capacity..
Boasts A Mech-Armor Shield-Style Exterior With A Sleek Aluminum Casing, Which Not Only Enhances The Visual Appeal But Also Contributes To Cooling With Integrated Thermal Venting Channels, Providing A Synergistic Boost To Both Aesthetics And Cooling Performance..
Features
- Our adapter enables an angled connection without any wire bending. This ensures full contact with all cable terminals and eliminates the risk of thermal issues that can occur due to tight bending radii.
- Boasts a mech-armor shield-style exterior with a sleek aluminum casing, which not only enhances the visual appeal but also contributes to cooling with integrated thermal venting channels, providing a synergistic boost to both aesthetics and cooling performance.
- Adopts a 12V2x6 specification connector that is also compatible with the 12VHPWR connector, ensuring full contact for safe current delivery, improving safety in power delivery.
- Reinforced PCB features a 2oz copper and 4-layer board design, supporting superior heat dissipation and a 600W power capacity.
- Engineered with a slimmer profile, this adapter maximizes compatibility, accommodating a broader range of graphics card configurations. However, it is specifically not compatible with the MSI GeForce RTX 4090 Suprim Liquid X 24G. Please check compatible list before purchasing.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #18
EZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to 3X PCIE 8 PIN for RTX 4070Ti/4080/3090Ti, with Pre-Installed Cable Combs-16AWG/White
Asin: B0BN6CD1CH | Model: EZDPR186 | PartNumber: EZDPR186
The Cable Material Is Made Of 16Awg Tinned Copper, And The Terminal Is Made Of Alloy Copper, Providing Support For A Maximum Output Of 600W, Stable Performance And Safety Under High-Load Use, No Frame Drop , No Screen Flickering, And Continuous Power Supply..
Featured With 4 Pcs Of Cable Comb, The Appearance Of The Cable Is Well-Organized, Allowing You To Easily Achieve Clean Cable Management And Unified Design..
Please Note That The Gpu Sleeved Extension Cable Is Not Suitable For 12Pin Geforce Rtx 30' Series Gpu. Only Support 12+4Pin 4080/3090Ti Gpu..
This 1 To 3X 8 Pin Sleeved Extension Cable Replaces The Complex Connection Configuration Of The Original 1 To 3X 8 Pin Cable, Which's Configuration Is Unsightly And Unsafe. Use The Ezdiy-Fab Extension Cable, The Best Solution For Safety And Aesthetics..
This Cable Is Only Extension Cable. Please Do Not Plug It Directly Into You Psu. Please Use A Power Supply With Sufficient Power According To The Manufacturer's Instructions. Generally, It Is Recommended To Use A Psu Of 1000W Or More To Match The Graphics Card Rtx4080/3090Ti..
Features
- Dedicated design for the specs of 12VHPWR PCIe 5.0 Graphics Card, Connect to RTX3090ti GPU without hassle, connecting to PCIe 8 PIN Cable from PSU to get a stable and reliable performance.
- This cable is only extension cable. Please do not plug it directly into you PSU. Please use a power supply with sufficient power according to the manufacturer's instructions. Generally, it is recommended to use a PSU of 1000W or more to match the graphics card RTX4080/3090ti.
- The cable material is made of 16AWG tinned copper, and the terminal is made of alloy copper, providing support for a maximum output of 600W, stable performance and safety under high-load use, no frame drop , no screen flickering, and continuous power supply.
- This 1 to 3x 8 Pin Sleeved extension cable replaces the complex connection configuration of the original 1 to 3x 8 Pin cable, which's configuration is unsightly and unsafe. Use the EZDIY-FAB extension cable, The best solution for safety and aesthetics.
- Featured with 4 pcs of cable comb, the appearance of the cable is well-organized, allowing you to easily achieve clean cable management and unified design.
- Please note that the GPU sleeved extension cable is not suitable for 12pin GeForce RTX 30' Series GPU. Only support 12+4pin 4080/3090TI GPU.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #19
EZDIY-FAB 12V to 5V RGB Converter, 3-Way Splitter, SATA Connector, 50 Color Modes, 100x 5V LEDs
Asin: B082KJH2T3 | Model: US-12V to 5V Controller | PartNumber: US-12V to 5V Controller
Included 3-Way Splitter, Could Extension With More Argb Devices.
The Converter Supports A Maximum Of 100X 5V 3-Pin Argb Leds And Can Withstand A Maximum Current Of 3A. Please Ensure Not To Exceed The Specified Load Limit..
Voltage Transformer From 12 To 5V, Powered By Sata..
Only Could Sync With 12V Rgb Motherboard. The Signal Numbers Of 12V Rgb And 5V Argb Of Different Motherboards Will Be Slightly Different. On Some Motherboards, Some Rgb Mixed Colors May Not Be Displayed Correctly (Such As Orange, Yellow), And The Color Of The Led Does Not Change Smoothly In Cycle Color Mode..
Features
- Mini Control box with built-in 50 color modes, or Holding mode button to sync with 12V RGB Motherboard
- ONLY could sync with 12V RGB motherboard. The signal numbers of 12V RGB and 5V ARGB of different motherboards will be slightly different. On some motherboards, some RGB mixed colors may not be displayed correctly (such as orange, yellow), and the color of the LED does not change smoothly in cycle color mode.
- Included 3-way splitter, could extension with more ARGB devices
- Voltage transformer from 12 to 5V, powered by SATA.
- The converter supports a maximum of 100x 5V 3-Pin ARGB LEDs and can withstand a maximum current of 3A. Please ensure not to exceed the specified load limit.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #20
EZDIY-FAB 12VHPWR 12+4 Pin Angle Connector Power Adapter Slim Type for RTX40' Series Graphics Card, Supports 600W Output, Comptatible to RTX4090,4080,4070ti -180 Degrees RVS Type- Black
Asin: B0C7FGGQPJ | Model: EZDPI189-25 | PartNumber: EZDPI189-25
The Perfect Solution For Users Experiencing Trouble With Their Rtx40' Series Graphics Card Power Cables Protruding Too Far From Their Pc Case, Preventing The Side Panel From Closing Properly; Please Check The Distance More Than 16.3Mm/0.64In Between Side Plate And Graphics Card..
600W High-Current Operation Supported By An Aluminum Heat Sink And Ventilation Holes, Ensuring Stable Performance With Optimal Heat Dissipation Efficiency..
The Terminals Are Crafted From High-Quality Alloy Copper, For Its Exceptional Conductivity And Stability. This Ensures A Reliable And Stable Connection Under High Loading Output In Long Term Using..
Our Angled Adapters Feature A Strengthened Pcb Design That Enables An Angled Connection Without Any Wire Bending. This Ensures Full Contact With All Cable Terminals And Eliminates The Risk Of Thermal Issues That Can Occur Due To Tight Bending Radii..
Features
- Optimize cable management in limited spaces like ITX cases with the slim-type aluminum shell version, while ensuring effective internal ventilation. Please refer to the compatibility list before making a purchase.
- Our angled adapters feature a strengthened PCB design that enables an angled connection without any wire bending. This ensures full contact with all cable terminals and eliminates the risk of thermal issues that can occur due to tight bending radii.
- The perfect solution for users experiencing trouble with their RTX40' series graphics card power cables protruding too far from their PC case, preventing the side panel from closing properly; Please check the distance more than 16.3mm/0.64in between side plate and graphics card.
- The terminals are crafted from high-quality alloy copper, for its exceptional conductivity and stability. This ensures a reliable and stable connection under high loading output in long term using.
- 600W high-current operation supported by an aluminum heat sink and ventilation holes, ensuring stable performance with optimal heat dissipation efficiency.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #21
EZDIY-FAB RTX 3000 Series 12 Pin to Dual 8 Pin PCIe Sleeved Extension Cable 300 MM- Connector for NVIDIA Ampere GEFORCE RTX 3060ti 3070 3080 FE Funder Edition- White
Asin: B08LKMF6FK | Model: US-W-12 to 8 pin | PartNumber: US-W-12 to 8 pin
High Quality Excellent Stability, Use Ul1007 Standard Cable, High Specification Wire Easily Handle Your Ultra Highpower Power Supply, Perfect For 500W - 1300W Psu..
Not Recommend To Connect This Cable Extension To Rtx3090. Rtx3080ti, 3090 Founder Edition Gpu, 16Awg Sleeved Cable Is Recommended, Please Search Asin B09zhchc4t..
The Cable Extension Measure 30Cm In Length And Equipped With Combs For A Clean Cable Management And A Uniform Design.
Cable Manufactured With 18Awg Wires And Come In A High-Density Flexible Protective Sleeve Allowing For A Stiff Yet Adaptable Temperament..
Features
- The modding sleeved 12pin adapter is design for RTX 3000 series PCIE graphics card and supports 3060ti/3070/3080.
- Cable manufactured with 18AWG wires and come in a high-density flexible protective sleeve allowing for a stiff yet adaptable temperament.
- High quality Excellent stability, use UL1007 standard cable, high specification wire easily handle your ultra highpower power supply, perfect for 500W - 1300W PSU.
- The cable extension measure 30cm in length and equipped with combs for a clean cable management and a uniform design
- Not recommend to connect this cable extension to RTX3090. RTX3080ti, 3090 Founder Edition GPU, 16AWG sleeved cable is recommended, please search ASIN B09ZHCHC4T.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #22
EZDIY-FAB RGB GPU Holder 5V 3-Pin Colorful RGB Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket- 309-1
Asin: B084S7X2W8 | Model: US-3528 RGB GPU holder-B | PartNumber: US-3528 RGB GPU holder-B
The Combination Of Aluminium Alloy Side Plates And Intermediate Acrylic Plates Slows Aging, Protects Vulnerabilities And Can Be Used As Long-Term Components..
Sync Rgb Lighting Via Motherboard:- Only Works With An Addressable Rgb(+5V, 3-Pin) Capable Motherboard Or An Addressable Rgb(+5V, 3-Pin) Controller(Please Check The Argb Motherboard Of Your Motherboard Before Purchase!).
The All-Anode Process Can Maintain The Durability Of The Surface Texture And Keep The Color From Changing For A Long Period Of Time..
Adaptable To A Wide Range Of Motherboards And Cases..
Features
- Adjustable for different video card weights and sizes
- Adaptable to a wide range of motherboards and cases.
- The combination of aluminium alloy side plates and intermediate acrylic plates slows aging, protects vulnerabilities and can be used as long-term components.
- The all-anode process can maintain the durability of the surface texture and keep the color from changing for a long period of time.
- Sync RGB lighting via motherboard:- ONLY works with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!)
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 1.00 x 10.30 x 3.10 Inches
See On Amazon #23
EZDIY-FAB Vertical GPU Mount with High-Speed PCIE 4.0 Riser Cable, Shield Series, 115mm/4.52in Flexible Extension, 90 Degree Connector, Only Compatible to Full-Opened PCIe Slots-White-YIHPI344-1
Asin: B0CP3LT6Y3 | Model: YIHPI344-1 | PartNumber: YIHPI344-1
Vertical Display Made Simple And Sturdy: Designed For Effortless Installation, This Mount Enables A Stunning Vertical Presentation Of Your Gpu. The Added Adjustable Support Screw Ensures A Distinctive And Stands Out With Added Stability..
Shield Series Design: Highlighting The Durability And Solid Protection The Component Offers, Combined With A Sleek Design That Embodies The Artistry Of Esports Aesthetics..
Bidirectional Locking Structure: Constructed With Superior Steel, This Component Is Designed With A Bidirectional Locking Structure, Offering Robust, Multi-Directional Support, Ensuring Heavy Graphics Cards Are Held Firmly In Place..
Precisely Engineered Riser Cable: The Pcie 4.0 Riser Cable Features A Carefully Angled Connector And An Ideal Length Of 115Mm/4.52In, Ensuring A Perfect Fit Without The Risk Of Bending Or Crimping, Thereby Protecting Your Motherboard Connectors From Potential Damage..
Features
- Optimized for Full PCI Slot Cases: Tailored for enclosures with 7 opened PCIe slots, this vertical GPU mount is ideal for RTX40 series; 3-slot graphics cards, requiring a case of minimum of 8 slots for optimal fit and stability.
- Precisely Engineered Riser Cable: The PCIe 4.0 riser cable features a carefully angled connector and an ideal length of 115mm/4.52in, ensuring a perfect fit without the risk of bending or crimping, thereby protecting your motherboard connectors from potential damage.
- Vertical Display Made Simple and Sturdy: Designed for effortless installation, this mount enables a stunning vertical presentation of your GPU. The added adjustable support screw ensures a distinctive and stands out with added stability.
- Bidirectional Locking Structure: Constructed with superior steel, this component is designed with a bidirectional locking structure, offering robust, multi-directional support, ensuring heavy graphics cards are held firmly in place.
- SHIELD Series Design: Highlighting the durability and solid protection the component offers, combined with a sleek design that embodies the artistry of esports aesthetics.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #24
EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module, Multi-Angle Adjustment with All White Riser Cable, Compatible to RTX4090, 4080, 4070ti - White
Asin: B0BXN1TVZL | Model: YIHPI333-19 | PartNumber: YIHPI333-19
Strong Magnet Base: Equipped With A Magnet For Stable Placement On Psu Shroud.
Compatible With Latest Models: Features Gen4 Riser Cable And Compatible With Rtx 4090, Rtx 4080, Rtx 4070Ti, Rtx 30' Series, And Rx70' Series. Prior Testing Of Riser Cable Onto Gpu Is Recommended. Please Refer To Length Spec Image To Confirm Compatibility With Your Chassis..
Wide Compatibility: Supports Most 2 And 3 Slot Graphics Cards, And Made Of High-Quality Metal Material For Increased Structural Toughness.
Synchronized Argb Lighting: Bracket Features Argb Led Lighting Effects And Can Sync With Motherboard Lighting (Aura, Mystic, Fusion) Via M/B 3-Pin Argb Header; Does Not Support 12V Rgb..
Features
- Enhance Cooling Efficiency: Adjustable bracket allows mounting of GPU vertically or at an angle for better heat dissipation on PSU shroud or any metal plane
- Synchronized ARGB Lighting: Bracket features ARGB LED lighting effects and can sync with motherboard lighting (AURA, Mystic, Fusion) via M/B 3-Pin ARGB Header; does not support 12V RGB.
- Strong Magnet Base: Equipped with a magnet for stable placement on PSU shroud
- Wide Compatibility: Supports most 2 and 3 slot graphics cards, and made of high-quality metal material for increased structural toughness
- Compatible with Latest Models: Features Gen4 riser cable and compatible with RTX 4090, RTX 4080, RTX 4070ti, RTX 30' Series, and RX70' Series. Prior testing of riser cable onto GPU is recommended. Please refer to length spec image to confirm compatibility with your chassis.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 0.01 x 6.30 x 1.57 inches
See On Amazon #25
EZDIY-FAB 12cm 120mm 200CFM 4000RPM CPU Cooling Fan 12V DC 4-Pin Molex PC Computer High CFM Cooling Case Fan with Metal Finger Guard Grill
Asin: B079NXYC7H | Model: PA-9IQE-G1DK | PartNumber: PA-9IQE-G1DK | Ean: 0641055392780, 0735935169361 | UPC: 735935169361, 641055392780
This Super High-Cfm-Speed Fan Design For Big Pc Or Server Cpu Cooling Component, Also Could Be Used For Refresh Air For Your Underground Garage, Cellar Or Another Space You Want.
Package Includes: 2X High Cfm Fan + 2X Metal Finger Guard Grill + 8X Screws And Nuts.
Size: 120Mm X 120Mm X 38Mm, Dual Ball Bearing, Speed: 4000 Rpm, Air Flow: 200 Cfm, Noise Level: 59Dba.
Features
- Most Powerful of All 120mm Fans, Ultra Strong Monster, High Quality Long Life
- Size: 120mm x 120mm x 38mm, Dual Ball Bearing, Speed: 4000 RPM, Air Flow: 200 CFM, Noise Level: 59dBA
- This super high-cfm-speed fan design for big pc or server CPU cooling component, also could be used for refresh air for your Underground Garage, Cellar or another space you want
- Package Includes: 2x High CFM Fan + 2x Metal Finger Guard Grill + 8x screws and nuts
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 4.72 x 1.50 x 4.72 inches
See On Amazon #26
EZDIY-FAB 5.25in 10Gbps USB 3.1 Gen2 Hub and Type-C Port,Front Panel USB Hub with QC 3.0 Quick Charging
Asin: B07T5QQZG4 | Model: AU-NEW 5.25 HUB-G2 | PartNumber: AU-NEW 5.25 HUB-G2 | Ean: 0680904699205 | UPC: 680904699205
3X Usb-A Gen2 Ports: Legacy Usb-A Ports Will Be Sticking Around For A While. The Vertexhub Has Three Ports For Any Type Of Legacy Usb-A Peripheral Device You Have. Upgraded To Support 10 Gbps For Each Port And Provide Power Delivery For Tablets And Phones.(5V/2.4A).
Elegant Brushed Aluminum Alloy Panel, Dimension Fit Any 5.25” Computer Case Front Bay.
2X Qc3.0 Charging Ports, Max Out 18W/Port, Built-In Smart Ic Chip, Provides Short-Circuit, Over-Heat, Over-Current, Over-Voltage, Over-Charge Protection; Charging Only, No Data Transfer..
1X Usb Type-C 3.1 Gen2 Port: The Ezdiy Hub Is Focused On The Future Of Usb-C And Its Most Versatile And Powerful Specifications. The Ezdiy Hub Was Built For Power Users To Replace Their Old Legacy Usb 3.0 Hubs.(5V/3A).
Features
- Ultimate USB-C & USB-A Charging and Data Hub: USB 3.1 Generation 2 compatible for all ports. Transfer data at 10 Gbps for each port.
- 1x USB Type-C 3.1 Gen2 Port: The EZDIY Hub is focused on the future of USB-C and its most versatile and powerful specifications. The EZDIY Hub was built for power users to replace their old legacy USB 3.0 hubs.(5V/3A)
- 3x USB-A Gen2 Ports: Legacy USB-A ports will be sticking around for a while. The VertexHUB has three ports for any type of legacy USB-A peripheral device you have. Upgraded to support 10 Gbps for each port and provide power delivery for tablets and phones.(5v/2.4A)
- 2x QC3.0 Charging Ports, Max out 18W/port, built-in smart IC chip, provides short-circuit, over-heat, over-current, over-voltage, over-charge protection; charging only, no data transfer.
- Elegant Brushed Aluminum Alloy panel, Dimension Fit any 5.25 computer case front bay
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Weight: 0.00 Pounds
See On Amazon #27
EZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to Female for RTX 3090Ti 4070Ti 4080 4090, with Cable Combs-16AWG/Black
Asin: B0BGGCL2LW | Model: EZDPR179 | PartNumber: EZDPR179
The Cable Material Is Made Of 16Awg Tinned Copper, And The Terminal Is Made Of Alloy Copper, Providing Support For A Maximum Output Of 600W, Stable Performance And Safety Under High-Load Use, No Frame Drop , No Screen Flickering, And Continuous Power Supply..
Featured With 4 Cps Of Cable Comb, The Appearance Of The Cable Is Well-Organized, Allowing You To Easily Achieve Clean Cable Management And Unified Design..
Please Note That The Gpu Sleeved Extension Cable Is Not Suitable For 12Pin Geforce Rtx 30' Series Gpu. Only Support 12+4Pin Female Gpu Like Rtx 3090Ti, Rtx 4080, Rtx 4090 And 40' Series..
The Design Of The Male-To-Female Connector Replaces The Complex Connection Configuration Of The Original 1 To 4X 8Pin Cable, Which's Configuration Is Unsightly And Unsafe. Use The Ezdiy-Fab Extension Cable, The Best Solution For Safety And Aesthetics..
This Cable Is Only Extension Cable. Please Do Not Plug It Directly Into You Psu. Please Use A Power Supply With Sufficient Power According To The Manufacturer's Instructions. Generally, It Is Recommended To Use A Psu Of 1000W Or More To Match The Graphics Card Rtx3090ti/4090/4080..
Features
- Dedicated design for the specs of 12VHPWR PCIe 5.0 Graphics Card, Connect to RTX3090ti/4090/4080/other 40' series GPU without hassle, connecting to original 1 to 4 power adapter or PCIe 5.0 Power Cable from PSU to get a stable and reliable performance.
- This cable is only extension cable. Please do not plug it directly into you PSU. Please use a power supply with sufficient power according to the manufacturer's instructions. Generally, it is recommended to use a PSU of 1000W or more to match the graphics card RTX3090ti/4090/4080.
- The cable material is made of 16AWG tinned copper, and the terminal is made of alloy copper, providing support for a maximum output of 600W, stable performance and safety under high-load use, no frame drop , no screen flickering, and continuous power supply.
- The design of the male-to-female connector replaces the complex connection configuration of the original 1 to 4x 8Pin cable, which's configuration is unsightly and unsafe. Use the EZDIY-FAB extension cable, The best solution for safety and aesthetics.
- Featured with 4 cps of cable comb, the appearance of the cable is well-organized, allowing you to easily achieve clean cable management and unified design.
- Please note that the GPU sleeved extension cable is not suitable for 12pin GeForce RTX 30' Series GPU. Only support 12+4pin female GPU like RTX 3090Ti, RTX 4080, RTX 4090 and 40' series.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #28
EZDIY-FAB Adapter Cable for Corsair Lighting Node Pro and for Corsair iCUE Commander PRO (hub is not Included), Smart RGB Lighting, Connect to Any 5V 3-Pin ARGB Devices (2 x 20cm)
Asin: B08KGMZ9YT | Model: US-NEW ICUE cable for led strips | PartNumber: US-NEW ICUE cable for led strips
Make Sure Your Rgb Device With 5V 3-Pin Connector.
Warnning: Corsair Hub Is Not Included!!!!!.
Each Adapter Cable 20Cm/7.8 In..
Features
- This adapter could connect to any 5V ARGB devices and controlled by Corsair node ICUE software
- Each adapter cable 20cm/7.8 in.
- Make sure your RGB device with 5V 3-Pin connector
- WARNNING: CORSAIR Hub is not included!!!!!
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #29
EZDIY-FAB PCIE Gen 4 16x Extreme Flexible, High Speed Riser Cable PCI Express 4.0 Port GPU Extension Card-Straight Connector [7.87in/20cm]
Asin: B09NB9D9PH | Model: US-Soft PCIE 4.0-20CM-180 | PartNumber: US-Soft PCIE 4.0-20CM-180
Advanced Technology Of Ultra Soft Cable Features As A 7.87In/200Mm Slim, Flat And Foldable Design For Better Cable Management Combining Elegance With Functionality..
Compatible With Graphics Cards - Rtx3090, Rtx3080ti, Rtx3080, Rtx3070ti, Rtx3070, Rtx3060ti, Rtx3060, Rx6900xt, Rx6800xt, Rx6800, Rx6700xt, Rx6600xt, And More / Chipset - X570, B550, Z690, B660 And Future New Gen4 Gpus & Chipsets..
Re-Designed Cables And Connectors, Ensure Minimal Signal Delay And Electromagnetic Interference-Free Operation..
Right Angle Connector Avoid Pressing The Cable, Stable Transmission, Easy To Install..
Features
- High stability and full PCIe Gen4 x16 speed, plug and play.Backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0.
- Right angle connector avoid pressing the cable, stable transmission, easy to install.
- Advanced technology of ultra soft cable features as a 7.87in/200mm slim, flat and foldable design for better cable management combining elegance with functionality.
- Re-designed cables and connectors, ensure minimal signal delay and electromagnetic interference-free operation.
- Compatible with graphics cards - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, and MORE / Chipset - X570, B550, Z690, B660 and future new Gen4 GPUs & Chipsets.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #30
EZDIY-FAB 12VHPWR 12+4 Pin Angle Connector Power Adapter for RTX40' Series Graphics Card, Supports 600W Output, Comptatible to RTX4090,4080,4070ti -90 Degrees STD Type- Black-1 Pack
Asin: B0C7FP2J93 | Model: EZDPI189-11 | PartNumber: EZDPI189-11
The Terminals Are Crafted From High-Quality Alloy Copper, For Its Exceptional Conductivity And Stability. This Ensures A Reliable And Stable Connection Under High Loading Output In Long Term Using..
We Offer Two Different Versions Of Our Angled Adapter: The 90-Degree Angle And The 180-Degree Angle. The 180-Degree Angle Adapter Is Perfect For Builds With Limited Space Or For Users Who Prefer A More Compact Design. The 90-Degree Angle Adapter, On The Other Hand, Is Ideal For Larger Builds And Offers More Flexibility In Cable Routing. There Are Std/Rvs Two Types Of Connector Direction, Please Check Compatible List Before Purchasing..
600W High-Current Operation Supported By An Aluminum Heat Sink And Ventilation Holes, Ensuring Stable Performance With Optimal Heat Dissipation Efficiency..
The Perfect Solution For Users Experiencing Trouble With Their Rtx40' Series Graphics Card Power Cables Protruding Too Far From Their Pc Case, Preventing The Side Panel From Closing Properly; Please Check The Distance More Than 26Mm Between Side Plate And Graphics Card..
Features
- Our angled adapters feature a strengthened PCB design that enables an angled connection without any wire bending. This ensures full contact with all cable terminals and eliminates the risk of thermal issues that can occur due to tight bending radii.
- The perfect solution for users experiencing trouble with their RTX40' series graphics card power cables protruding too far from their PC case, preventing the side panel from closing properly; Please check the distance more than 26mm between side plate and graphics card.
- The terminals are crafted from high-quality alloy copper, for its exceptional conductivity and stability. This ensures a reliable and stable connection under high loading output in long term using.
- 600W high-current operation supported by an aluminum heat sink and ventilation holes, ensuring stable performance with optimal heat dissipation efficiency.
- We offer two different versions of our angled adapter: the 90-degree angle and the 180-degree angle. The 180-degree angle adapter is perfect for builds with limited space or for users who prefer a more compact design. The 90-degree angle adapter, on the other hand, is ideal for larger builds and offers more flexibility in cable routing. There are STD/RVS two types of connector direction, please check compatible list before purchasing.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon