FEITON - Buying Guide

Bestselling from FEITON on Amazon

1. Remote Battery Disconnect Switch Upgraded Kill Switch for Car Truck DC12V 200A Remote Control Anti-T...
2. 500A High Current 12V-36V Battery Cut Off Switch with Lock-Out Plate, Replace 20247, Waterproof Mast...
3. Remote Battery Disconnect Switch 360A Starting Current Upgraded Kill Switch for Car Truck DC12V 200A...
4. Chain Tensioner with 1-3/4" Roller for Coleman Mini Bike BT200X CT200U Trail CT200U-EX MiniBike Trai...
5. Dual Clutch Transmission Remover Tools Clutch Actuator Motor Unlock Reset Tool for Ford Focus 6 Spee...
6. RV Portable Macerator Waste Water Pump for Sewage, 12V 12GPM Suction 3.2 feet Lift 10 feet, Quick Re...
7. FEITON 90195 Electric Proportional Trailer Brake Controller Kit, Fit for Silverado, Ram, Tacoma, Uni...
8. 12-48V 300A Heavy Duty Power Distribution Block + 250A Remote Battery Disconnect Switch & 5 AWG Batt...
9. 12-48V 300A Heavy Duty Terminal Block + 3rd Generation 200A Remote Battery Disconnect Switch DC12V 1...
10. 12V-48V 300A Bus Bar, 3/8" Studs + 2nd Generation DC12V 200A Remote Battery Disconnect Switch Kill S...

Features

• !!! Note: On some models of vehicles, after the remote control of this product is used to disconnect the vehicle battery and turn it on again, you need to wait about 6s before pressing the vehicle start switch to start the vehicle.
• !!! For facilitate installation, the black negative wire has been installed at the bottom of the battery switch. This product needs to be connected to the original negative wire on the car. If you mind this change, we recommend that you can choose the 250A Upgrade model. Please pay attention to the installation instructions; If your car stereo can not be completely power off, then once you use our product to completely disconnect the battery, the stereo needs to be re-matched when you start the vehicle again!!!
• REPLACEMENT REMOTE BATTERY DISCONNECT SWITCH - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security!
• WIDE APPLICATIONS - Remote battery disconnect switch works well for Car, Truck, RV, Travel Trailer, Camper, SUV, ATV, UTV, Marine, Van, Boat, Agricultural Vehicle Trike Auto Off Road Jeep and other engine applications with a 12 volt battery.
• PREMIUM QUALITY - Kill Switch for Car is made of silver contact and pure copper wires. Durable and Reliable. Rated current 200A DC12V, this Battery Disconnect Isolator is upgraded from the old model as the improved fittings make mounting contacts stronger. All required wiring harnesses included, no need to buy additional accessories.
• EASY INSTALLATION - No modifications needed! Step 1: Connect the red wire to the positive pole of the battery. Step 2: Fix the battery clip to the negative pole of the battery. 12V battery disconnect switch allows you not to open the hood every time for turn on the power, just press the remote control key button to disconnect your car power system, saving you plenty of time.
• BUY WITH CONFIDENCE - FEITON Upgraded Remote Battery Disconnect Switch comes with 1-Year Warranty, if you have any questions when using this dual remote control 12V 200A car wireless remote battery disconnect switch isolator On Off kill master, please feel free to contact us for a replacement. We will reply your email as soon as possible!
• See more on Amazon...

Features

• HIGH CURRENT & WATERPROOF - 12V-36V, 500A rated current, 5000A instantaneous current, replacement part number: 20247, 10MM threaded studs with nuts, polarity negative, metal material, watertightness processing.
• SIMPLE OPERATION - High Current Battery Cut Off Switch with Lock-Out Plate, turn the knob to turn it on or off. The heavy duty rotary handle is locked to the panel through a padlock hole to prevent accidental opening or closing, as well as tampering or unauthorized use.
• UNIVERSAL BATTERY DISCONNECT SWITCH - Which protects against electrical fires and theft when equipment is not in use and provides a reliable way to shutdown electrical power during maintenance and protect batteries from excessive battery drain. Disconnect the battery when you are not driving a Car / Boat / RV / Yachts / Vehicle / ATV / Trucks / Off-road / Tractors / Agricultural Equipment, etc. Keep you safe all the time.
• EASY TO INSTALL - Compared to the remote control switch, there is no need for programming or code, just connect the product with wire, the operation is very simple. For the specific connection mode, please refer to the wiring diagram in our product picture. If you have any questions, please contact us in any time.
• 100% SATISFACTORY SERVICE - This 500A High Current Battery Disconnect Switch come with a 1 year warranty. Whether before, during or after sale, we always respond positively to your questions. What we pursue is not only to provide quality products, but also to provide satisfactory service.
• See more on Amazon...

Features

• !!! Note: On some models of vehicles, after the remote control of this product is used to disconnect the vehicle battery and turn it on again, you need to wait about 6s before pressing the vehicle start switch to start the vehicle. For facilitate installation, the black negative wire has been installed at the bottom of the battery switch. This product needs to be connected to the original negative wire on the car. Please pay attention to the installation instructions; If your car stereo can not be completely power off, then once you use our product to completely disconnect the battery, the stereo needs to be re-matched when you start the vehicle again!!!
• EASY INSTALLATION - No modifications needed! Step 1: Connect the red wire to the positive pole of the battery. Step 2: Fix the battery clip to the negative pole of the battery. 12V battery disconnect switch allows you not to open the hood every time for turn on the power, just press the remote control key button to disconnect your car power system, saving you plenty of time.
• REPLACEMENT REMOTE BATTERY DISCONNECT SWITCH - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security!
• WIDE APPLICATIONS - Durable and Reliable. Rated current 200A DC12V Remote battery disconnect switch works well for Car, Truck, RV, Travel Trailer, Camper, SUV, ATV, UTV, Marine, Van, Boat, Agricultural Vehicle Trike Auto Off Road Jeep and other engine applications with a 12 volt battery.
• BUY WITH CONFIDENCE - FEITON Upgraded Remote Battery Disconnect Switch comes with 1-Year Warranty, if you have any questions when using this dual remote control 12V 200A car wireless remote battery disconnect switch isolator On Off kill master, please feel free to contact us for a replacement. We will reply your email as soon as possible!
• See more on Amazon...

Features

• CHAIN TENSIONER WITH 1-3/4" ROLLER - Chain tensioner plays an important role in the operation of the drive system. Heavy duty chain tensioner work as a adjuster roller guide can prevent chain loose, fall off, reduce sprocket/chain wear. Replacing the broken or damage chain tensioner regularly can protect your safety while riding the bikes.
• COMPATIBLE WITH - Fit for Coleman Powersports BT200X CT200U-EX CT200U-EXR CT200U Trail CT200U-A CT200U-AC; Baja Motorsports Mini Bike MB165 MB200 (Heat, Mini Baja, Warrior); Hensim Mini Bike MB165 & MB200 (Heat, Mini Baja, Warrior); MASSIMO MB200; TrailMaster MB200; 6.5hp Powersports Mini Bike. Please check the size and compatibility before ordering!
• PREMIUM QUALITY - FEITON Chain Tensioner with 1-3/4 Roller for 6.5HP Massimo MB200 Hensim Baja Heat Warrior MB165 MB200 Coleman Ct200u Falcon 200 Mini Bike Motorsports manufactured by FEITION undergo strict quality control throughout the production process. During each step of production multiple quality control checks are performed to insure every parts can last for long lifespan. Durable and Reliable!
• PACKAGE INCLUDES - 1 Piece Chain Tensioner, 1 Piece Chain Tensioner Spring. A bad chain tensioner can be identified by a loose chain that falls off during ride time, so please check and replace it regularly!
• BUY WITH CONFIDENCE - FEITON Chain Tensioner with 1-3/4 Roller Arm Spring comes with 1-Year Warranty, if you have any questions when using this chain tensioner parts on your BT200X, CT200U Trail, and CT200U-EX mini bikes, 6.5HP Massimo MB200 Hensim Baja Heat Warrior MB165, please don t hesitate to contact us for a replacement. We will reply your email within as soon as possible.
• See more on Amazon...

Features

• SPECIFICATION - 3.62 inch Length, 6mm Diameter, 14 Teeth, with 1/4'' Drive.
• SUPERIOR QUALITY - Made of high quality steel, good toughness is not easy to break. Keep it clean & dry after use to extend the service life of the product.
• SIMPLE & CONVENIENT - Simple operation, insert the reset tool into the lever actuator hole, turn the tool anti-clockwise to release the lock on the clutch until the clutch is fully opened, and then set the new clutch.
• WIDE COMPATIBILITY - Used to unlock dry dual clutch transmission motor drive clutch. compatible with Ford DSG 6 speed dual clutch DPS6 transmission. Applicable Vehicle Include: Ford Fiesta: 2011-2019; Ford Focus: 2012-2018; Ford Transit Connect: 2019; Ford B-MAX: since 2012ect.
• 100% SATISFACTORY SERVICE - This product come with a 1 year warranty. Whether before, during or after sale, we always respond positively to your questions. What we pursue is not only to provide quality products, but also to provide satisfactory service.
• See more on Amazon...

Features

• Faster & Farther Release - Only 4 minutes to empty a 40-gallon(150L) sewage tank. 12V DC, 12 GPM Flow Rate, 15 PSI Pressure Setting(40 PSI MAX), Pump up to 10FT lift & 3.2FT suction. Fits 3" DIAMETER RV waste outlets, installation, disassembly and cleaning are easy & fast, but it can't handle hard objects, sanitary napkins or rags
• Self-priming Pump & Manual Crushing - Stainless steel double 4-leaf blade, self-priming impeller, to crush the dirt into small particles, and pump the discharge to your sewer. When there is hair and other entanglement, you can screw off and reverse install the lid, and then manually crush. Reduces particle size to 1/16 maximum, which can be quickly discharged through the 25MM outlet
• Self-cleaning - Equipped with garden hose connector, connect water pipes to clean the residue in the pump. The connector has a switch rotary button to control the water flow, and clean the pump while discharging the sewage, which is simple, convenient and hygienic
• Noiseless & Thermally Protected Motor - Fully enclosed, made of pure copper. Run Dry Protection up to 30 seconds. Built-in thermal overload protection. If the motor is overheated, the RV sewage pump will automatically stop working and will resume operation when the temperature drops to a safe range. While do not recommend running the pump for more than 15 minutes continuously
• Whether the RV portable macerator pump is connected to 12V battery or the car cigarette lighter. Whether the water pipe is 1 or 3/4, it can be cleaned by fitting connecting the pump with the fitting. It can be used as an accessory for outdoor campers' /portable tank dumping and cleaning, boat winterization kit, clean and transporting sewage for marine toilet and sewer systems
• Buy With Confidence - FEITON RV Portable Waste Pump comes with 1-Year Warranty, if you have any questions when using this 12GPM RV Macerator Pump, please feel free to contact us for a replacement. We will reply your email as soon as possible!
• See more on Amazon...

Features

• Reliable Boost Feature - When towing a heavy load the boost function can provide additional braking power, increasing the sensitivity of the brake controllers inertial sensor and enhancing the participation of the trailer's brakes during a braking event to ensure a smooth, safe, comfortable stop. The 90195 trailer brake controller offers three levels of boost pressure,you can customize the braking response based on the weight and braking characteristics of the trailer.
• Proportional Braking & Manual Braking - The trailer brake controller provides proportional braking, meaning it applies the trailer brakes in proportion to the towing vehicle's braking force for smoother and controlled braking, reduce speed and improve stability when towing or stopping. The controller includes a manual control lever that allows you to manually apply the trailer's brakes, allowing you to give your brakes a little, or a lot, of stopping power depending on your needs.
• LCD Display & Multi-user Storage - Customizable, multi-lingua(English / French / Spanish) LED display lets you choose your background color, language, and allows you to adjust display contrast for changing lighting conditions. Display information such as output current, battery, output voltage, diagnosis, and error codes, and flashes easily readable onscreen alerts. This brake controller allows up to five storable setting options for pulling different trailers, or towing preferences of multiple drivers. If you use the same trailer for multiple trailers, or if different drivers have specific braking preferences, just choose from your saved settings.
• Easy & Multi-Option Installation - Equipped with all accessories required for product installation. The brake controller uses a plug-and-play wire harness, as well as both a traditional mounting bracket, and snap-in mounting clip to simplify the installation process. That allows for quick connection/disconnect between the controller and tow vehicle for fast and easy installation or removal. Equipped with product instructions and product drawings, a detailed introduction of the product installation and function setting steps, as well as troubleshooting method.
• Widely Applicable & Satisfactory After-Sales Service - Universal Wireless Trailer Brake Controller supports trailers with 1-4 axles, suitable for various types of trailers such as small multi-purpose trailers, travel trailers, and large commercial trailers. Compatible with Ford, Gm, Chevrolet, Dodge, Ram, Toyota, Jeep, SUV, truck, and more. Replace for Tekonsha Prodigy P3 Brake Controller. We offer a 2-year warranty for this product, and if you have any questions, you can contact us by email.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• Top Post Battery Switch & Easy Installation - This top post remote battery disconnect switch is suitable for TOP POST TERMINAL, made of high quality material, designed for a 15-17mm Tapering Post. We provided product wiring drawings (Refer to product image 3), equipped with wires and various accessories to cope with problems such as small installation space near the battery
• Anti-theft & Save electricity - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• 200/1000A Heavy Duty Relay - 12V DC, Rated current 200A, Starting current 1000A. Stand-by current 0.005A, and the loss of the battery is small enough to be negligible. 12V Cars, RVS, trucks, heavy-duty equipment can be used. Even in extremely cold conditions, it will work properly and start your battery.
• 3/8 Side Post Heavy Duty Battery Switch - The detailed dimensions of the main product and accessories are indicated (Refer to product image 5). You need to pay special attention to the size of the space reserved in your car and the installation distance of the product, pay attention to the size of the relay and the length of the wire.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• REPLACEMENT REMOTE BATTERY DISCONNECT SWITCH - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security
• WIDE APPLICATIONS - Remote battery disconnect switch works well for Car, Truck, RV, Travel Trailer, Camper, SUV, ATV, UTV, Marine, Van, Boat, Agricultural Vehicle Trike Auto Off Road Jeep and other engine applications with a 12 volt battery
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• REPLACEMENT REMOTE BATTERY DISCONNECT SWITCH - Wireless kill switch enables you to kill your car battery power with remote control, which can help to prevent battery drain and protect the circuit. Besides, car battery disconnect switch can disconnect the power of your car, the theif cannot start and stole your car. Just press the remote control button to disconnect your car power system, easy to use and improve security!
• EASY INSTALLATION - No modifications needed! 12V battery disconnect switch allows you not to open the hood every time for turn on the power, just press the remote control key button to disconnect your car power system, saving you plenty of time.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty Terminal Strip- Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• PREMIUM QUALITY - Kill Switch for Car is made of silver contact and pure copper wires. Durable and Reliable. Rated current 200A DC12V, this Battery Disconnect Isolator is upgraded from the old model as the improved fittings make mounting contacts stronger. All required wiring harnesses included, no need to buy additional accessories.
• WIDE APPLICATIONS - Remote battery disconnect switch works well for Car, Truck, RV, Travel Trailer, Camper, SUV, ATV, UTV, Marine, Van, Boat, Agricultural Vehicle Trike Auto Off Road Jeep and other engine applications with a 12 volt battery.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Heavy Duty Terminal Strip- Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• PREMIUM QUALITY - Kill Switch for Car is made of silver contact and pure copper wires. Durable and Reliable. Rated current 200A DC12V, this Battery Disconnect Isolator is upgraded from the old model as the improved fittings make mounting contacts stronger. All required wiring harnesses included, no need to buy additional accessories.
• WIDE APPLICATIONS - Remote battery disconnect switch works well for Car, Truck, RV, Travel Trailer, Camper, SUV, ATV, UTV, Marine, Van, Boat, Agricultural Vehicle Trike Auto Off Road Jeep and other engine applications with a 12 volt battery.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• HIGH CURRENT & WATERPROOF BATTERY DISCONNECT SWITCH - 12V-36V, 500A rated current, 5000A instantaneous current, replacement part number: 20247, 10MM threaded studs with nuts, polarity negative, metal material, watertightness processing.
• SIMPLE OPERATION - High Current Battery Cut Off Switch with Lock-Out Plate, turn the knob to turn it on or off. The heavy duty rotary handle is locked to the panel through a padlock hole to prevent accidental opening or closing, as well as tampering or unauthorized use.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• Universal Battery Disconnect Switch - High current battery disconnect switch is designed to cut off the electrical power of the electrical system, which protects against electrical fires and theft when equipment is not in use and provides a reliable way to shutdown electrical power during maintenance and protect batteries from excessive battery drain. Disconnct the battery when you are not driving a car / boat / RV / vehicle / ATV / UTV / Trucks / Trailers. Keep you safe all the time.
• Premium Quality - Rated to 200 Amps continuous duty, 1000 Amps intermittent duty, used for 12-48 VDC systems to isolate and secure the electrical system. Master battery disconnect switch with face plate is made of robust aluminum alloy heavy duty housing, strong weather resistance and long service lifespan. It can protect the internal components of the switch for use in the harsh condition. Replace part number: 20701, 062790.
• See more on Amazon...

Features

• Bus Bar Specification - 12-48V red & black bus bar with screw: 3 x #8(M4) terminal screws, 4 x 3/8 "(M10) terminal stud. The dimensions(L*W*H): 17*7*5cm. Weight: 0.563kg. All the terminals of our bus bars are made of stainless steel, which will be less prone to rust compared to other Iron terminal busbar and can be used for a longer time.
• Upgrade Design - Copper plates are held in place by large bolts instead of small screws, bus bar and base can withstand large torque, the entire busbar more stable and the busbar will not shake when unscrewing the nut. The small screw is centered, the wiring is more convenient to pass from the side, the wiring can also be staggered from other high-current wires.
• Heavy Duty - Power distribution block Max 300V AC or 48V DC voltage. The 4.0 mm copper bar is thicker than others' 2.0 mm brass busbar, and the 5mm copper plate is thicker than the other 3.0mm copper plate and can withstand higher currents.
• Battery Disconnect Switch rated to 200 Amps continuous duty, 1000 Amps intermittent duty, used for 12-48 VDC systems to isolate and secure the electrical system. Master battery disconnect switch is widely used for ATVs, Trailers, UTVs, Cars, Marine Outboard, Off-road, RVs, Trucks, Heavy Vehicles, and electrical equipment's switch.
• UNIVERSAL BATTERY DISCONNECT SWITCH - High current battery disconnect switch is designed to cut off the electrical power of the electrical system, which protects against electrical fires and theft when equipment is not in use and provides a reliable way to shutdown electrical power during maintenance and protect batteries from excessive battery drain. Disconnct the battery when you are not driving a car / boat / RV / vehicle / ATV / Trailers / Off-road, etc. Keep you safe all the time.
• See more on Amazon...