FORIOT - Buying Guide

Bestselling from FORIOT on Amazon

1. FORIOT 2Pcs USB Meter Tester LCD DC Digital Blue and Red Display Current Voltage Meter Multi-Functio...
2. FORIOT 8Pcs MB102 Breadboard 3.3V/5V Power Supply Module DC 6.5V-12V Input or USB Power Supply for A...
3. FORIOT LCR-TC1 Multi-Function Chargeable Transistor Meter with 1.8'' Full Color Display for Diode Tr...
4. FORIOT Type-C Tester Multi-Functional Digital Tester DC 4.5-36V 0-8A Current Voltage Meter Power Cap...
5. FORIOT 2pcs 5V Micro USB Timer Relay DC 6-30V Programmable Cycle Delay Timer Switch Module with Digi...
6. FORIOT 100Amp Circuit Breaker 12-48V DC with Manual Reset and Pure Copper Design for Boats Trolling ...
7. Smart Switch Relay Module FORIOT 1-Channel DC7-32V Inching and Self-Locking Switch Module DIY Smart ...
8. FORIOT 3Pcs DC to DC LM2596 Buck Converter Module DC 4-40V Input Voltage 1.25-37V DC Adjustable Outp...
9. FORIOT SP107E Addressable Pixel LED Light Controller DC 5V-24V with Mobile Music BT for WS2812B,WS28...
10. FORIOT 100Amp Circuit Breaker 12-48V DC with Manual Reset and Pure Copper Design and Type-C Tester M...

Features

• USB voltage and current tester can display voltage and current data at the same time, can detect a variety of power supply output voltage and current.
• The input and output voltage of the tester is 4V-30V, and the voltage resolution is 0.01V.
• The input and output current of the USB meter is 0-3A, and the current resolution is 0.01A.
• USB male plugged into a 5V charger, female socket plugged into a cell phone and other devices, you can directly read out the voltage and current parameters.
• USB current detector can measure the power supply or power consumption of cell phone charger, U disk and other products.
• See more on Amazon...

Features

• MB102 breadboard power supply module supports input voltage 6.5V-12V DC or power supply through USB interface, the maximum output current is less than 700mA.
• The power supply module is independently controlled by the upper and lower circuits, which can switch the voltage to 0V, 3.3V, and 5V via jumper caps.
• The MB102 expansion board has two on-board output voltages of 3.3V and 5V. The board comes with a green power indicator.
• Power extension board is suitable for electronic building blocks, smart car, Arduino robot light power extension.
• Attention: The input voltage of the module is DC 6.5V-12V. If the input voltage is 5V and the output voltage is not reaching to 5V, there will be a voltage drop between the input and output of the voltage regulator chip.
• See more on Amazon...

Features

• Versatility: LCR-TC1 can be used to measure parameters of electronic components such as inductance (L), capacitance (C) and resistance (R). This makes it an important tool for electronics engineers, electronics hobbyists, and laboratory users as it helps them evaluate the performance and characteristics of electronic components.
• High Accuracy: This test instrument has high-precision measurement capabilities and is able to provide accurate measurement results, which is critical for applications that require precise measurements. It helps ensure component quality and performance meet specifications.
• User Friendly: The LCR-TC1 features an intuitive user interface and an easy-to-read LCD display, making operation simple. Even beginners can easily use it for measurement and analysis.
• Wide application: This instrument is suitable for various scenarios, including electronic repair, circuit design, education and scientific research. You can use it to test various electronic components such as inductors, capacitors, and transistors.
• Portable Design: The LCR-TC1 has a compact design that makes it easy to carry, making it suitable for mobile and field testing. No matter where you are, it can handle testing tasks with ease.
• See more on Amazon...

Features

• Type-C Multi-function Tester supports fast identification of multiple parameters such as current, voltage, power, charge, capacity, resistance, timing, number of capacity groups, Celsius, Fahrenheit and so on. One screen displays multiple parameters.
• Digital Display Voltage and Current Tester can detect the charging status of electrical appliances in real time, real-time monitoring of charging voltage and current and other multiple parameters information at a glance.
• Display On/Off Function: Switch the interface to the hibernation screen interface through the multifunctional key short press to close the display.
• Test a variety of Type-C interface digital devices: Easily test a variety of chargers, data cables, rechargeable treasure, laptops, cell phones, Type-C digital devices and so on.
• A variety of fast charging protocols are automatically detected, fast charging recognition detection covers almost all fast charging protocols, which can meet the needs of various types of cell phone users.
• See more on Amazon...

Features

• Product Parameters Operating voltage: DC 6V-30V, support micro USB 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40 -85 (-40 -185 ).
• Timing Range The time delay relay supports 0.1 seconds (min) - 999 minutes (max) continuously adjustable. The timing range is selected by short pressing the STOP button after setting the parameter values in the mode selection interface.
• Enable Mode ON: the delay relay is allowed to be on during the OP conduction time; OFF: the delay relay is forbidden to be on and is off; short press the STOP button in the main interface to switch between ON and OFF, the current state will flash and then return to the main interface.
• Sleep Mode When the digital LED cycling relay is enabled,digital tube of the relay board will automatically turn off if there is no operation for 5 minutes. It can be woken up by pressing any of the buttons.
• Application Scenario DC 6-30V programmable delay relay is widely used in electronic security systems, industrial automation equipment, intelligent irrigation systems and home automation systems, etc.
• See more on Amazon...

Features

• The circuit breaker is compatible with 12-48V DC and the maximum current is 100Amp.
• The trolling motor circuit breaker plays a better role in overload protection, short-circuit protection and under-voltage protection in the circuit, which can protect both the line and power supply.
• The 100A circuit breaker has a manual reset function, which is easy and safe to operate, and the interface is designed with pure copper, making it safer for customers to install in the panel or firewall.
• The 100A marine circuit breaker has been redesigned with waterproof housing, which can better protect the fuse from corrosion.
• The 12-48V circuit breakers are mainly used for circuit protection in cars, boat trolling motors, trucks and audio-visual systems.
• See more on Amazon...

Features

• Easy Installation Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• Function Settings You can set your switch relay as a channel setting switch, a delay switch and a cycle switch for the channel.
• Working Mode There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• Family Sharing You can share the Smart Switch Relay Module with your family members for control.One person can connect the relay switch and multiple people can use it at the same time.
• Handcraft DIY You can connect garage shutter doors, household lights, smart speakers, fans, electric curtains and other devices to remote control relay switch module, realizing the control of this device through mobile phone.
• See more on Amazon...

Features

• The LM2596 buck converter module comes with an LED digital voltage display.You can adjust the accuracy of the buck as needed.
• The DC to DC converter has an input voltage of DC 4-40V, an adjustable output voltage of DC 1.25-37V, and an output current of 2A.
• The range of the voltmeter is 0-40V and the error is 0.1V.
• The buck converter modules include input reverse polarity protection, built-in output short circuit protection and integrated thermal shutdown.
• The display shows the input or output voltage by pressing the right button. When the right OUT LED shows output, the left IN LED shows input.
• See more on Amazon...

Features

• SP107E LED music controller supports various IC models, including WS2811, WS2812B, WS2801, WS2813, SM16703, TM1804, UCS1903, SK6812, LPD8806, APA102, APA105, DMX512, TM1914, TM1913, P9813, INK1003, P943S, P9411, P9413, TX1812, TX1813, GS8206, GS8208, SK9822, TM1814, SK6812-RGBW, P9414, P9412, LPD6803. (Note: WS2812 and WS2813 are not available in the APP. When using these two models, you can choose WS2811 for the model).
• LED strip light controller has 180 kinds of regular non-musical dynamic pattern effects, 30 kinds of LED matrix board music lighting effects and 18 kinds of light strip music lighting effects. The display speed, brightness, arrangement and sensitivity can be designed by yourself.
• The SP107E controller has adjustable RGB channel sequences and supports common single or dual line LED driver ICs on the market (optional support ICs in the app), supports up to 960 pixels, and supports simple deployment operations.
• SP107E LED music controller has two ways of audio input, supports microphone and audio line input.
• The working voltage of the LED audio light strip music controller is DC 5V-24V. The product package includes controller*1, audio cable*1, DC connection cable*1, terminal wire*1, screwdriver*1.
• See more on Amazon...

Features

• The circuit breaker is compatible with 12-48V DC and the maximum current is 100Amp.
• The trolling motor circuit breaker plays a better role in overload protection, short-circuit protection and under-voltage protection in the circuit, which can protect both the line and power supply.
• The 100A circuit breaker has a manual reset function, which is easy and safe to operate, and the interface is designed with pure copper, making it safer for customers to install in the panel or firewall.
• Type-C Multi-function Tester supports fast identification of multiple parameters such as current, voltage, power, charge, capacity, resistance, timing, number of capacity groups, Celsius, Fahrenheit and so on. One screen displays multiple parameters.
• Digital Display Voltage and Current Tester can detect the charging status of electrical appliances in real time, real-time monitoring of charging voltage and current and other multiple parameters information at a glance.
• See more on Amazon...

Features

• Operating voltage: DC 6V-30V, support micro USB 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40 -85 (-40 -185 ).
• The time delay relay supports 0.1 seconds (min) - 999 minutes (max) continuously adjustable. The timing range is selected by short pressing the STOP button after setting the parameter values in the mode selection interface.
• Type-C Multi-function Tester supports fast identification of multiple parameters such as current, voltage, power, charge, capacity, resistance, timing, number of capacity groups, Celsius, Fahrenheit and so on. One screen displays multiple parameters.
• Digital Display Voltage and Current Tester can detect the charging status of electrical appliances in real time, real-time monitoring of charging voltage and current and other multiple parameters information at a glance.
• Display On/Off Function: Switch the interface to the hibernation screen interface through the multifunctional key short press to close the display.
• See more on Amazon...

Features

• Operating voltage: DC 6V-30V, support Type-C 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40 -85 (-40 -185 ).
• The time delay relay supports 0.1 seconds (min) - 999 minutes (max) continuously adjustable. The timing range is selected by short pressing the STOP button after setting the parameter values in the mode selection interface.
• Type-C Multi-function Tester supports fast identification of multiple parameters such as current, voltage, power, charge, capacity, resistance, timing, number of capacity groups, Celsius, Fahrenheit and so on. One screen displays multiple parameters.
• Digital Display Voltage and Current Tester can detect the charging status of electrical appliances in real time, real-time monitoring of charging voltage and current and other multiple parameters information at a glance.
• Display On/Off Function: Switch the interface to the hibernation screen interface through the multifunctional key short press to close the display.
• See more on Amazon...

Features

• The SP107E controller has adjustable RGB channel sequences and supports common single or dual line LED driver ICs on the market (optional support ICs in the app), supports up to 960 pixels, and supports simple deployment operations.
• LED strip light controller has 180 kinds of regular non-musical dynamic pattern effects, 30 kinds of LED matrix board music lighting effects and 18 kinds of light strip music lighting effects. The display speed, brightness, arrangement and sensitivity can be designed by yourself.
• Type-C Multi-function Tester supports fast identification of multiple parameters such as current, voltage, power, charge, capacity, resistance, timing, number of capacity groups, Celsius, Fahrenheit and so on. One screen displays multiple parameters.
• Digital Display Voltage and Current Tester can detect the charging status of electrical appliances in real time, real-time monitoring of charging voltage and current and other multiple parameters information at a glance.
• Display On/Off Function: Switch the interface to the hibernation screen interface through the multifunctional key short press to close the display.
• See more on Amazon...

Features

• The circuit breaker is compatible with 12-48V DC and the maximum current is 60Amp.
• The trolling motor circuit breaker plays a better role in overload protection, short-circuit protection and under-voltage protection in the circuit, which can protect both the line and power supply.
• The 60A circuit breaker has a manual reset function, which is easy and safe to operate, and the interface is designed with pure copper, making it safer for customers to install in the panel or firewall.
• Type-C Multi-function Tester supports fast identification of multiple parameters such as current, voltage, power, charge, capacity, resistance, timing, number of capacity groups, Celsius, Fahrenheit and so on. One screen displays multiple parameters.
• Digital Display Voltage and Current Tester can detect the charging status of electrical appliances in real time, real-time monitoring of charging voltage and current and other multiple parameters information at a glance.
• See more on Amazon...

Features

• Precise welding and high efficiency: The spot welding machine has 80 levels of power adjustable function to ensure more accurate and efficient welding. It is equipped with dual pulse output technology to make the welding effect even better.
• Long battery life and versatility: Built-in 5000mAh large-capacity battery provides long-term use and supports dual-mode optional, automatic and manual switching. It is suitable for welding of various mobile phone batteries and is convenient for out-of-town maintenance.
• Easy to operate: It adopts a one-hand operation design and can be held with one hand, which is convenient and easy to use. The integrated design frees the other hand for fixing the nickel sheet. It supports 0.1-0.15mm nickel sheet welding and can support 0.2mm nickel sheet when fully charged. Chip welding, welding is more precise.
• Intelligent identification and multi-material application: It has intelligent identification function and supports fully automatic welding operations. It is suitable for different materials such as stainless steel sheets, stainless iron sheets, etc. The welding is firm and the solder joints are excellent.
• Safety protection and user-friendly design: Equipped with a high-definition LCD screen to clearly and intuitively display operating information. The maximum output current of the power lithium battery is as high as 1200A. It also has multiple safety protection measures such as low voltage/overcurrent/overcharge protection, and is suitable for various cylinders. Type lithium batteries, nickel metal hydride batteries, cadmium nickel batteries, etc. to ensure safe and reliable welding.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• The 1865O battery module supports Type A USB output and micro USB input.
• The power module supports 5V/2A and 3V/1A output.
• The 1865O module has overcharge and overdischarge protection.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• The operating temperature of 1865O module is -20 ~70 , and the conversion efficiency is up to 95%.
• 1865O mobile power module supports USB output or expansion port data, support 5V/3A and 3V/1A output.
• Mobile power built-in lithium battery protection IC , over-current, over-voltage, under-voltage and over-temperature protection.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• You can share the Smart Switch Relay Module with your family members for control.One person can connect the relay switch and multiple people can use it at the same time.
• The 120pcs DuPont cable set contains 40-pin male to female jumper cables, 40-pin male to male jumper cables, and 40-pin female to female jumper cables.
• The jumper kit contains 10 different colors of DuPont cables.Each cable can be separated individually.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• You can share the Smart Switch Relay Module with your family members for control.One person can connect the relay switch and multiple people can use it at the same time.
• You can connect garage shutter doors, household lights, smart speakers, fans, electric curtains and other devices to remote control relay switch module, realizing the control of this device through mobile phone.
• 4010 Fan:Size: 40*40*10mm/1.57*1.57*0.39inch Speed: 4000 10%RPM Noise: 18dB Rated voltage: 12V Rated current: 0.1A
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• MOSFET Driver Module can drive up to 24V loads, such as LED light strip, DC motor, micro pump, solenoid valve.
• When PWM is high level (3.3V-5.0V): between V+ and V- is the supply voltage, the working indicator is on and the load works.
• When PWM is low level (0V-0.5V): 0 between V+ and V-, the working indicator is off and the load does not work.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• The XL6009 is a high performance boost module. The module uses the second generation of high frequency switching technology of XL6009E1 as the core chip, the performance far exceeds the first generation chip.
• The XL6009 DC to DC Adjustable Boost Module has a built-in 4A high-efficiency MOSFET switching tube that can be used with up to 94% efficiency.
• The boost conversion module supports ultra-wide input voltage of 4V-32V and output voltage of 5V-35V, and the optimal operating voltage range is 5V-32V.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• The LM2596 buck converter module comes with an LED digital voltage display.You can adjust the accuracy of the buck as needed.
• The DC to DC converter has an input voltage of DC 4-40V, an adjustable output voltage of DC 1.25-37V, and an output current of 2A.
• The buck converter modules include input reverse polarity protection, built-in output short circuit protection and integrated thermal shutdown.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• LED strip light controller has 180 kinds of regular non-musical dynamic pattern effects, 30 kinds of LED matrix board music lighting effects and 18 kinds of light strip music lighting effects. The display speed, brightness, arrangement and sensitivity can be designed by yourself.
• The SP107E controller has adjustable RGB channel sequences and supports common single or dual line LED driver ICs on the market (optional support ICs in the app), supports up to 960 pixels, and supports simple deployment operations.
• SP107E LED music controller has two ways of audio input, supports microphone and audio line input.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• 20A DC-DC buck module can provide constant voltage and constant current for high power supply, support output voltage and output current regulation (CV CC adjustable).
• The operating temperature of this buck module is -20 C to 75 C (-4 F to 167 F) and the operating humidity is 5% to 95% relative humidity.
• The buck board is equipped with 2 heat sinks so that the performance can be fully utilized and the service life can be extended.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• Operating voltage: DC 6V-30V, support Type-C 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40 -85 (-40 -185 ).
• The time delay relay supports 0.1 seconds (min) - 999 minutes (max) continuously adjustable. The timing range is selected by short pressing the STOP button after setting the parameter values in the mode selection interface.
• ON: the delay relay is allowed to be on during the OP conduction time; OFF: the delay relay is forbidden to be on and is off; short press the STOP button in the main interface to switch between ON and OFF, the current state will flash and then return to the main interface.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• 24V relay adopts optocoupler isolation, strong driving ability, stable performance, driving current is 5mA.
• The working voltage of the relay module is 24V DC, and the module can be set to high level or low level trigger through the jumper.
• Relay interface adopts humanized interface design, all interfaces can be directly connected through the terminal lead.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• 12V 1-channel relay supports normally open maximum load: AC 250V/2A, DC 30V/2A, trigger current 5mA.
• The relay module works with 12V DC, and the module can be set to high or low level trigger by jumper.
• The interface of the relay adopts humanized interface design, all interfaces can be connected directly through terminal leads.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• 12V 4-channel relay supports normally open maximum load: AC 250V/10A, DC 30V/10A, trigger current 5mA.
• Relay module working voltage support DC 5V, DC 9V, DC 12V, each channel in the module can be set through the jumper high level or low level trigger contact part of the independent wiring, safety and reliability.
• Relay interface adopts humanized interface design, all interfaces can be directly connected through terminal leads.
• See more on Amazon...

Features

• Download the eWelink App and connect the relay switch to WF network.Please ensure that the WF network is turned on and the signal of the 2.4G band is turned on.Smart relay can access the smart voice assistant of the mobile phone for switch control.
• There are two modes of smart switch relay,inching mode and self-locking mode,and they can be switched between two modes.In the inching mode, press the button on the app and the switch will turn on and turn off automatically after 1 second. In the self-locking mode, press the button on the app to turn on the switch, and press the button again to turn off the switch.
• 12V 2-channel relay supports normally open maximum load: AC 250V/2A, DC 30V/2A, trigger current 5mA.
• The relay module works with 12V DC, the module can be set to high or low level trigger by jumper.
• The interface of the relay adopts humanized interface design, all interfaces can be connected directly through terminal leads.
• See more on Amazon...

Features

• The trolling motor circuit breaker plays a better role in overload protection, short-circuit protection and under-voltage protection in the circuit, which can protect both the line and power supply.
• The 60A circuit breaker has a manual reset function, which is easy and safe to operate, and the interface is designed with pure copper, making it safer for customers to install in the panel or firewall.
• Product Parameters Operating voltage: DC 6V-30V, support micro USB 5V power supply; trigger source: high level (3V-24V), with optocoupler isolation; output power: 30V/5A DC,220V/5A AC; quiescent current: 20mA; operating current: 50mA; operating temperature: -40 -85 (-40 -185 ).
• Enable Mode ON: the delay relay is allowed to be on during the OP conduction time; OFF: the delay relay is forbidden to be on and is off; short press the STOP button in the main interface to switch between ON and OFF, the current state will flash and then return to the main interface.
• Sleep Mode When the digital LED cycling relay is enabled,digital tube of the relay board will automatically turn off if there is no operation for 5 minutes. It can be woken up by pressing any of the buttons.
• See more on Amazon...