FUMECLEAR - Buying Guide

Bestselling from FUMECLEAR on Amazon

1. FumeClear Solder Fume Extractor - Powerful 100W Suction, Low-Noise, 3-Stage Filtration System with 1...
2. FumeClear Replacement Filters Sets For The FC-100A(100W) Fume Extractor 1st&2nd&3rd Layer Pre-Filter...
3. FC2001 Solder Fume Extractor Is Designed For Desktop Soldering 120m /h Strong Suction Low Noise Inte...
4. FumeClear FC1002A Replacement Filter Sets For The FC-1002A(210W) Fume Extractor 1st&2nd&3rd Layer Pr...
5. Fumeclear FC-2002 Solder Fume Extractor for 10W Laser Engraving, Low-Noise, Strong Suction 260m /h, ...
6. Fumeclear FC-2002A ESD Fume Extractor Low-Noise Strong suction 260m /h,3-Stage Filtration System wit...
7. Fumeclear FC-2004 Fume Extractor For Laser Engraver 20W 30W 40W 50W, Strong Suction Power up to 420m...
8. FumeClear Duct Hose fume extractor retractable heat resistant duct hose, 78 inches long. (50mm Diame...
9. Fumeclear FC-2003 Dual-port Fume Extractor For 20W 30W Laser Engraving, Low-Noise, Strong Suction 33...
10. Get 25USD off when you buy FC2001 fume extractor and replaceable filter set together!

Features

• 99.97% PURIFICATION RATE The FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution.
• MULTIPLE FILTRATION SYSTEM (3 layers) The unique 3-layer filter design that can effectively filter out 99.97% of harmful gases and tiny impurities. And FC100A is also equipped with 10 pre-filters specifically designed to absorb large particles of dust.
• PROFESSIONAL GRADE HIGH IODINE FILTER FC100A main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money
• GREAT SUCTION POWER FC100A fume extractor has a much higher suction power than similar products, up to 200m /h. It can easily absorb all fine objects near the hood head, including exhaust gas, powder, iron filings, etc.
• NO AFTER-SALES WORRIES All of our products are CE and FCC certified. Our FumeClear engineers are available 24/7 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems.
• See more on Amazon...

Features

• HIGH PURIFICATION RATE-When medium hepa filter and main carbon filter are combined, the purification effect is 99.97%.
• MULTIPLE FILTRATION SYSTEM (3 layers)-The unique 3-layer filter design that can effectively filter out 99.97% of harmful gases and tiny impurities.
• PROFESSIONAL GRADE HIGH IODINE FILTER-FC100A main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money
• Package Contents - Pre-filter*5 Medium hepa filter*1 Main carbon filter*1
• NO AFTER-SALES WORRIES-All of our products are CE and FCC certified. Our FumeClear engineers are available 24/7 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems.
• As a technology company specializing in air purification solutions, Fumeclear has been doing its best to control costs and save money for every customer. But first, we must ensure the quality. Trust me, the products we provide to each of our customers have always been of the highest quality and most cost-effective.
• See more on Amazon...

Features

• Designed For Desktop Soldering - If you specialize in desktop soldering, trust me the FC2001 fume extractor is the perfect choice for you! It is compact and lightweight, perfect for placing on the table. And compared to traditional small exhaust fans, the FC2001 has enough suction power to cover the entire soldering work area.
• Professional Grade High Iodine Filter - The main filter of the FC2001 utilizes the latest type of high iodine value coconut shell activated carbon. Ordinary smoke extractors can only extract the smoke, but the smoke still remains in the room. However, High Iodine Value Coconut Shell Activated Carbon can purify the smoke and turn it into harmless air with 99.97% purification efficiency. Really protect your lungs from pollution.
• Professional Deodorizing Ability - When harmful gases containing odors are drawn into the FC2001's one-piece main filter, the high iodine-value coconut-shell activated carbon inside it firmly adsorbs harmful substances from the air and removes odors. Provide you a really clean and healthy working environment.
• Excellent Suction Power- FC2001 solder smoke extractor can reach the highest suction power of 120m /h. The wind speed can be stabilized to 6m/s. The maximum noise does not exceed 52dB. The effect of its use far exceeds other similar products. And its main carbon filter service life of up to 2880 hours, very economical and environmentally friendly. It is the ideal choice for desktop soldering!
• NO AFTER-SALES WORRIES - All of our products are CE ROSH FCC UL certified. Our FumeClear engineers are available 24/7 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems.
• See more on Amazon...

Features

• HIGH PURIFICATION RATE-When medium hepa filter and main carbon filter are combined, the purification effect is 99.97%.
• HIGH SERVICE LIFE-Up to 5700 hours of continuous service life
• HIGH QUALITY-Sturdy and durable
• Package Contents - Pre-filter*5,Medium hepa filter*1,Main carbon filter*1
• No after-sales worries, any problems can always contact us to return or exchange
• See more on Amazon...

Features

• Powerful Suction Capability - The FC2002 solder fume extractor is capable of achieving a significant suction power of up to 260m /h, effectively absorbing all exhaust gases, powders, wood chips, iron chips, etc. within a 15cm range near the hood head. Ideal for various operational scenarios such as 3-10W laser engraving machines, cutting machines, desktop soldering.
• 99.97% Purification Rate - The FC2002 fume extractor incorporates a 3-stage filtration system designed to capture large particles, smoke and dust below 0.3 microns. With its combination of pre-filter, Hepa filter and main carbon filter, the FC2002 achieves an outstanding purification rate of 99.97%, providing you with clean, fresh air. keep your eyes and lungs free from pollution.
• Professional Grade High Lodine Filter - The FC2002 fume extractor features a main carbon filter made of highly iodized coconut shell activated carbon that provides superior adsorption and purification capabilities compared to regular activated carbon. With a maximum service life of up to 4000 hours, depending on usage, this filter offers exceptional durability and value for money. Additionally, the FC2002 comes equipped with 10 replaceable pre-filters.
• Aerospace-Grade Noise Reduction Structure - The FC2002 solder fume extractor features an aerospace-grade noise reduction design. It is painted with noise-reducing coating and encapsulates high-density sound-absorbing sponge at each interface of the structure. The maximum noise level produced is under 55db.
• Worry-Free After-Sales Service - The FC2002 is CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and an exchange or return policy in case of any quality issue.
• See more on Amazon...

Features

• Designed for ESD - The FC2002A fume extractor features a special ESD case that is ideal for laser engraving and repairing cell phones, computers and other electronic products. When soldering and laser engraving, ordinary fume extractor may gather static electricity and damage the motherboard of electronic products, while FC2002A's special shell can effectively absorb static electricity and completely isolate this situation. Protect your property safety.
• 99.97% Purification Rate - The FC2002A fume extractor features a 3-stage filtration system with a maximum suction power of 260m /h to effectively capture smoke and dust down to 0.3 microns. Equipped with 10 pre-filter, a HEPA filter, and a main carbon filter, this unit achieves an impressive 99.97% purification rate, ensuring that you breathe in clean, fresh air.
• Professional Grade High Iodine Filter - The FC2002A solder fume extractor features a main carbon filter made of highly iodized coconut shell activated carbon for superior adsorption and purification capabilities compared to regular activated carbon. With a maximum service life of up to 4000 hours (depending on usage), this filter offers exceptional durability and value for money.
• Aerospace-Grade Noise Reduction Structure - The FC2002A ESD fume extractor features an aerospace-grade noise reduction design. It is painted with noise-reducing coating and encapsulates high-density sound-absorbing sponge at each interface of the structure. The maximum noise level produced is under 55db.
• Worry-Free After-Sales Service - The FC2002A is CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and an exchange or return policy in case of any quality issue.
• See more on Amazon...

Features

• Designed for High-Power Laser Cutting - The FC2004 fume extractor is specially designed for laser engraving machines above 20W, and is highly effective in purifying up to 99.98% of harmful gases and filtering out dust and smoke impurities below 0.2 microns. Ideal for laser engraving, spraying, electroplating, and soldering.
• Triple Filtration System (3 layers) - The FC2004 adopts a 3-layer filtration structure, with a pre-filter and a HEPA filter to effectively isolate most of the large particles in the air, followed by a main carbon filter that filters out harmful dust and smoke in the air below 0.2 microns. Keep your eyes and lungs free from pollution.
• Professional-Grade High-Iodine Filter - The FC2004 main carbon filter is made with high-iodine coconut shell carbon, which is 2-3 times more effective in adsorbing and filtering soot below 0.2 microns than ordinary activated carbon, with a service life of over 4000 hours. The FC2004 is also equipped with 10 pre-filter cottons, making it a great value for your money.
• Great Suction Power - With a suction power of up to 420m /h, the FC2004 fume extractor easily absorbs all fine objects under the fume hood head, including exhaust gas, powder, iron filings, etc. It truly guards your health and keeps you away from pollution.
• Worry-Free After-Sales Service - FC2004 has been CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and a return or exchange policy in case of any quality problems.
• See more on Amazon...

Features

• The hose is made of high-temperature-resistant material and can withstand temperatures of up to 200 to 300 degrees Celsius, making it ideal for soldering and laser engraving.Please note that the hose connection has a metal tip, be careful of scratching when installing.
• The hose is retractable with a normal length of 12-16 inches and a maximum length of 78 inches. Perfect for FC-100A FC-2002 FC-2002A FC-2003 fume extractor.
• 2 Metal Hose Clamps are included in the package to securely fasten the hose to the fume extractor and to the exhaust hole of the laser engraver.
• Installation is simple, after connecting the hose to the fume extractor, place the metal clamp on the connection and then tighten the clamp with a screwdriver to complete the installation.
• NO AFTER-SALES WORRIES All of our products are CE and FCC certified. Our FumeClear engineers are available 24/7 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems.
• See more on Amazon...

Features

• 99.97% Purification Rate - The FC2003A fume extractor is equipped with 2 ports that can work simultaneously, making it ideal for use in a factory assembly line, multi-machine studio, and beauty salon. It is highly effective in filtering out dust below 0.3 microns, with a purification efficiency of up to 99.97%. A great value for your money!
• Multi-Filtration System (3 Layers) - Compared with ordinary 2-layer filtration systems, the 3-layer filter design of FC2003 effectively filters out 99.97% of harmful gases and micro impurities, resulting in a better purification effect. Keep your eyes and lungs free from pollution. In addition, FC2003 is equipped with 10 pieces of pre-filter cotton.
• Professional-Grade High Iodine Filter - The main carbon filters used in the FC200 series fume extractors are made of high-iodine coconut shell activated carbon, which has double the adsorption and purification effect of ordinary activated carbon, and a long service life that can last anywhere from 2000-4000 hours depending on its use.
• Great Suction Power - The FC2003 has two air inlets that can work simultaneously, with a suction power of up to 330 m /h when working with a single inlet and 165 m /h when working with two inlets. It easily absorbs all fine objects within 15 cm, including exhaust fumes, hair, iron filings, paper, etc. It truly guards your health and keeps you away from pollution.
• Worry-Free After-Sales Service - FC2003 has been CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and a return or exchange policy in case of any quality problems.
• See more on Amazon...

Features

• The package contains a total of 2 main filters, 10 pieces of pre-filters. Better deal than buying them individually, 25USD off!
• Designed For Desktop Soldering - If you specialize in desktop soldering, trust me the FC2001 fume extractor is the perfect choice for you! It is compact and lightweight, perfect for placing on the table. And compared to traditional small exhaust fans, the FC2001 has enough suction power to cover the entire soldering work area.
• Professional Grade High Iodine Filter - The main filter of the FC2001 utilizes the latest type of high iodine value coconut shell activated carbon. Ordinary smoke extractors can only extract the smoke, but the smoke still remains in the room. However, High Iodine Value Coconut Shell Activated Carbon can purify the smoke and turn it into harmless air with 99.97% purification efficiency. Really protect your lungs from pollution.
• Professional Deodorizing Ability - When harmful gases containing odors are drawn into the FC2001's one-piece main filter, the high iodine-value coconut-shell activated carbon inside it firmly adsorbs harmful substances from the air and removes odors. Provide you a really clean and healthy working environment.
• Excellent Suction Power- FC2001 solder smoke extractor can reach the highest suction power of 120m /h. The wind speed can be stabilized to 6m/s. The maximum noise does not exceed 52dB. The effect of its use far exceeds other similar products. And its main carbon filter service life of up to 2880 hours, very economical and environmentally friendly. It is the ideal choice for desktop soldering!
• See more on Amazon...

Features

• 99.97% PURIFICATION RATE The FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution.
• MULTIPLE FILTRATION SYSTEM (3 layers) The unique 3-layer filter design that can effectively filter out 99.97% of harmful gases and tiny impurities. The 15PCS pre-filters specifically designed to absorb large particles of dust.
• PROFESSIONAL GRADE HIGH IODINE FILTER FC100A main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money
• GREAT SUCTION POWER FC100A fume extractor has a much higher suction power than similar products, up to 200m /h. It can easily absorb all fine objects near the hood head, including exhaust gas, powder, iron filings, etc.
• NO AFTER-SALES WORRIES All of our products are CE and FCC certified. Our FumeClear engineers are available 24/7 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems.
• See more on Amazon...

Features

• Designed For Desktop Soldering - If you specialize in desktop soldering, trust me the FC2001 fume extractor is the perfect choice for you! It is compact and lightweight, perfect for placing on the table. And compared to traditional small exhaust fans, the FC2001 has enough suction power to cover the entire soldering work area.
• Professional Grade High Iodine Filter - The main filter of the FC2001 utilizes the latest type of high iodine value coconut shell activated carbon. Ordinary smoke extractors can only extract the smoke, but the smoke still remains in the room. However, High Iodine Value Coconut Shell Activated Carbon can purify the smoke and turn it into harmless air with 99.97% purification efficiency. Really protect your lungs from pollution.
• Professional Deodorizing Ability - When harmful gases containing odors are drawn into the FC2001's one-piece main filter, the high iodine-value coconut-shell activated carbon inside it firmly adsorbs harmful substances from the air and removes odors. Provide you a really clean and healthy working environment.
• Excellent Suction Power- FC2001 solder smoke extractor can reach the highest suction power of 120m /h. The wind speed can be stabilized to 6m/s. The maximum noise does not exceed 52dB. The effect of its use far exceeds other similar products. And its main carbon filter service life of up to 2880 hours, very economical and environmentally friendly. It is the ideal choice for desktop soldering!
• NO AFTER-SALES WORRIES - All of our products are CE ROSH FCC UL certified. Our FumeClear engineers are available 24/7 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems.
• See more on Amazon...

Features

• 99.97% Purification Rate - The FC2003A fume extractor is equipped with 2 ports that can work simultaneously, making it ideal for use in a factory assembly line, multi-machine studio, and beauty salon. It is highly effective in filtering out dust below 0.3 microns, with a purification efficiency of up to 99.97%. A great value for your money!
• Multi-Filtration System (3 Layers) - Compared with ordinary 2-layer filtration systems, the 3-layer filter design of FC2003 effectively filters out 99.97% of harmful gases and micro impurities, resulting in a better purification effect. Keep your eyes and lungs free from pollution. In addition, FC2003 is equipped with 10 pieces of pre-filter cotton.
• Professional-Grade High Iodine Filter - The main carbon filters used in the FC200 series fume extractors are made of high-iodine coconut shell activated carbon, which has double the adsorption and purification effect of ordinary activated carbon, and a long service life that can last anywhere from 2000-4000 hours depending on its use.
• Great Suction Power - The FC2003 has two air inlets that can work simultaneously, with a suction power of up to 330 m /h when working with a single inlet and 165 m /h when working with two inlets. It easily absorbs all fine objects within 15 cm, including exhaust fumes, hair, iron filings, paper, etc. It truly guards your health and keeps you away from pollution.
• Worry-Free After-Sales Service - FC2003 has been CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and a return or exchange policy in case of any quality problems.
• See more on Amazon...

Features

• Anti-static housing - The FC2002A fume extractor boasts an anti-static coating, effectively preventing product damage caused by static electricity. Perfect for use in cell phone, watch, stereo, and other precision instrument repair and manufacturing workshops, this unit boasts a maximum suction power of 260m /h, meeting the demands of most machines for fume extraction.
• 99.97% Purification Rate -The FC2002A fume extractor features a 3-stage filtration system that effectively captures large particles, smoke, and dust as small as 0.3 microns. Equipped with 10 pre-filter, a HEPA filter, and a main carbon filter, this unit achieves an impressive 99.97% purification rate, ensuring that you breathe in clean, fresh air.
• Professional Grade High Iodine Filter - The FC2002A solder fume extractor features a main carbon filter made of highly iodized coconut shell activated carbon for superior adsorption and purification capabilities compared to regular activated carbon. With a maximum service life of up to 4000 hours (depending on usage), this filter offers exceptional durability and value for money.
• Aerospace-Grade Noise Reduction Structure - The FC2002A anti-static fume extractor features an aerospace-grade noise reduction design. It is painted with noise-reducing coating and encapsulates high-density sound-absorbing sponge at each interface of the structure. The maximum noise level produced is under 55db.
• Worry-Free After-Sales Service - The FC2002A is CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and an exchange or return policy in case of any quality issue.
• See more on Amazon...

Features

• Designed for High-Power Laser Cutting - The FC2004 fume extractor is specially designed for laser engraving machines above 20W, and is highly effective in purifying up to 99.98% of harmful gases and filtering out dust and smoke impurities below 0.2 microns. Ideal for industrial workshops such as spraying, electroplating, and soldering.
• Triple Filtration System (3 layers) - The FC2004 adopts a 3-layer filtration structure, with a pre-filter and a HEPA filter to effectively isolate most of the large particles in the air, followed by a main carbon filter that filters out harmful dust and smoke in the air below 0.2 microns. Keep your eyes and lungs free from pollution.
• Professional-Grade High-Iodine Filter - The FC2004 main carbon filter is made with high-iodine coconut shell carbon, which is 2-3 times more effective in adsorbing and filtering soot below 0.2 microns than ordinary activated carbon, with a service life of over 4000 hours. The FC2004 is also equipped with 10 pre-filter cottons, making it a great value for your money.
• Great Suction Power - With a suction power of up to 420m /h, the FC2004 fume extractor easily absorbs all fine objects under the fume hood head, including exhaust gas, powder, iron filings, etc. It truly guards your health and keeps you away from pollution.
• Worry-Free After-Sales Service - FC2004 has been CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and a return or exchange policy in case of any quality problems.
• See more on Amazon...