FYSETC - Buying Guide

Bestselling from FYSETC on Amazon

1. FYSETC Prus I3 MK52 MK3S Build Plate Gold Textured/Smooth Double Sided 253.8x241mm, Newest JanusBPS...
2. FYSETC 3D Printer Parts Ender 3 Stepper Motor Cable X Y Z Axis Stepper Motor and Limited Switch Ends...
3. FYSETC Prusa i3 MK3 MK3S Cooling Fan 5015 50x50x15mm 5V DC 0.35A otend Cooler Blow Radiator Sleeve ...
4. FYSETC Ender 5 Plus Stepper Motor Extension Cable - Not Replace for Original Limit Swtich Wire: X Y ...
5. FYSETC BL Touch Cable + Mounting Bracket: 2 Types BLtouc CRtouch Leveling Sensor Extension Wire Rack...
6. FYSETC 3D Printer Accessories - Prusa i3 MK4 Nextruder Heaterblock - Aluminium Block for The Hotend:...
7. FYSETC Prusa MK4 Part - Nextruder V6 Nozzle Adapter Replacement - Bimetal Heatbreak Adaptor: High Te...
8. FYSETC 2pcs 3D Printer Heated Bed Insulation 220x220x8mm(8.66x8.66x0.3 inch) Lightweight Foam Foil S...
9. FYSETC 2Pcs Prusa i3 MK3s+ Heater Cartridge 24V 40W 6x15 Heating Tube Pipe 1Meter(39.3in) for Prusa ...
10. FYSETC 3D Platform Prusa i3 MK3S+ MK4 PEY Build Plate: Upgrade Smooth PEY - Textured PEI Spring Stee...

Features

• A must have 3D Printer part for DIY or replace a new Prus i3 MK3 MK52 printer hot bed. The steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI. Only fit for new magletic MK52/MK3/S heatbed, not include magletic base.!!! Note: The plate is not completely flat due to its spring characteristics, but don't worry, it can be fully pulled and solved by the strong maglet of hotbed.
• This double sides coated sheet is very easy to use, simply place it onto your heated bed, both sides can use directly.
• Size: 254X241mm/ 10X9.4inch, suitable for the same size build plate. If need more help, please feel free to contact us via your order ID.
• The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
• Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• See more on Amazon...

Features

• Ender 3 stepper motor cable, Compatible with Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch
• Total cable length X/E Axis: about 790mm/31inch(the longest terminal about 900mm/35.4inch),Y Axis:about 400mm/15.7inch, Z Axis: about 300mm/11.8inch.
• One-piece plug design, easy to install, hard to snap, convenient to plug or release.
• Packaging includes 1 x X/E Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable,
• After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.
• See more on Amazon...

Features

• Brushless DC Blower Fan, best DIY replacement extruder hotend parts, This MK3 fan is used for Prus i3 MK3 MK3S MK2/2.5 3D printer Extruder
• Size: About 50x50x15mm/ 1.9x1.9x0.59 inch; Cable Length: about 750mm/ 29.5 inch
• Rated Voltage: 5V, 0.35A
• Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won't work properly.
• Package Content: 2piece 5015 5V Front hotend blower fans. If need more support, please feel free to contact us, we'll assist you directly.
• See more on Amazon...

Features

• 1.Upgrade FDM 3D Printer Accessory: YES, this cable set is Much shorter than the stock one. NOT Drop-in Replacement, Just Used for Extending connection, Must be installed with the factory cables. Package Content: 1 Set Ender 5 - Ender 5 Pro -Ender 5 Plus Stepper Motor limit switch Connection Extension Cable for X Y Z Extruder. Each piece clearly marked for an axis with connectors, the extra Z axis extension is to respond to some customers' voice for Ender 5 Plus Dual Z motor.
• 2.Cable's length(including the connectors) X Axis:650mm/25.59in Y Axis:650mm/25.59in Dual Z Axis:320mm/12.59in, E axis: 520mm/ 20.47inch. To meet the need of enlarge room when assembly. If the length is still not long enough for your 3d printing project, please feel free to mail us. We can provide you the suitable one.
• 3. Easy Installation: Connect the Male Terminals on this extension cable with the factory Stepper Motor & Limit Swtich cable, then the other Female Ends of this extending wire for the endstop pcb board or controller motherboard. Attach them to the gantry kit to route properly for a clean look and safe operation. You can peel each piece into 2 cables to get a separate motor extension cable and a limit switch extension cable.
• 4. High Quality: Well made, OEM quality, Nicely tucked wires and not in harness way. One-piece plug design, easy to install, hard to snap, convenient to plug or release.
• 5. Note: We only test this extension cable set on Ender 5 series, not on ender 3 or ender 3 pro. If need other 3d printer part for ender 5 or plus, such as 235x235 build plate, 377x370 spring steel sheet, or ender 5 plus hotbed heater mat, please go to our shop.
• See more on Amazon...

Features

• This BL Touch transfer wire set includes 2pcs transfer wires + 1 bracket( it does not fit for Ender 3 V2/ Ender 3 Max). The length of the cables are about 1.5m/59inch, long enough to connect.
• The bracket is Compatible with Ender 3, Ender 3S, Ender 5, Ender 5S, CR10 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard. Does not work for 8-bit motherboard, please clarify what version your motherboard is before buying.
• 2 Wires: one works for 32 bit V4.2.7 motherboard, another works for 32 bit V4.2.2, must use a adapter pin 27 board(Asin: B07PR26KSD at our store) to connect.
• Easy to Install and Use: 2 kinds of Different transfer wires allow for installation on different control boards of your printers.
• Genuine High Quality Set: Our package includes 1 set of auto bed Leveling transfer cable Kit. Simple, smart and easy to install. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
• See more on Amazon...

Features

• Spare must parts for DIY your FDM 3D printing project or MK4 Hot End Original repair Part: This is a clone alluminium block for the Hotend assembly dedicated for printers using Nextruder. The extruder heater block was easily completed with heating element, temperature sensor, nozzle adapter and steel nozzle 0.4. The enclosed M3 stud bolts have a Torx drive (TX6) not HEX, so you must use the right tool.
• Package include: only a aluminum heating block and Enclosed M3 Stud Bolts, but not come with a silicone sock.
• Material: Aluminum, not copper. High Temperature, high precision, stable performance.
• Easy of use: The clone nextruder heater block was easily completed with heating element, temperature sensor, nozzle adapter heatbreak and steel nozzle 0.4, can directly install.
• Other MK4 clone parts will be back, like heater cartridge heatbed thermistor kit nozzle ir sensor etc, if needed, please email us.
• See more on Amazon...

Features

• 1.A must-have spare part for DIY your FDM 3D printing project or replace Original MK4 - MK3.9 - XL Extruder Throat: This is a clone bimetal heatbreak for the Hotend assembly dedicated for printers equipped with Nextruder. This adapter makes your Nextruder compatible with any V6 nozzle. Not compatible with Prusa I3 MK3S, MK3, MK2.5S, MK2.5, MK2S, MMU2, SCW1, SL1, MINI, MK3S+, MINI+, SL1S, CW1S, MK2, MMU2, MMU1, MMU3, MK3.5.
• 2. How To Replace the Stock Adaptor?- First, screw the throat into the heater block tightly with a wrench, heating up the printhead at the same time is VERY necessary(if using an old heater block), then screw the nozzle tightly enough. Last, screw the throat and nozzle one more time together with the heated block. You can see there exists a gap about 0.5mm between nozzle and block, then done! Refer Installation Video on YT, search: MK4 split pipe installation. Any question, please contact us.
• 3. Package Content: Nextruder V6 Nozzle Adapter with 3pcs High flow E3DV6 nozzles. We have other cloned MK4 spare parts, such as 241x253.8mm Smooth PEI PEO PET PEY - Textured build plate, heatblock, heating element thermistor, 104nt heat bed thermistor kit, silicone sock at our store now.
• 4. High Quality Bi-Metal Heatbreak: This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction. It has High temperature resistant up to 500C degree, with different thermal conductivity and smooth inner wall reduce 3d printer material clogging. A wide compatibility with different filaments, such as PLA, TPU, PETG, Wood, ABS, etc.
• 5.V6 Nozzle Saver: With this adaptor filament feeding tube you can reuse all your existing V6 style nozzles. All-metal filament guide (no PTFE tubes anywhere) improves the overall reliability of the printer. More other cloned MK4 printer part will come soon, like Extruder axis stepper motor, extruder breakout board, mainboard. If needed, please mail us.
• See more on Amazon...

Features

• Package include: 2PCS 3d printer bed mat 220x220mm/8.66x8.66inch Lightweight Foam Foil. If need larger heated bed cover, please search Asin:B0BJPWYYYW for 400x400mm/15.74x15.74inch, or B08XQ3CK81 for 350x350mm/13.77x13.77inch, or B07DWPYQDS for 300x300mm/11.81x11.81inch at our store.
• Function: Apply for 3D Printer Heated Bed, aluminum substrate, PCB hot bed, silicone hot bed bottom, such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxela AquilaC1/ C2. To help keep the build plate surface warm when 3d printing filaments like PLA, ABS, PETG, TPU works on the spring steel pei sheet.
• Material: Insulation Lightweight Foam Foil, about 24g/pc, heat-resistant, fire prevent, durable. Comes with strong back adhesive.
• Temperature: Suggestion Temperature - 50 to 150 (-58 ~302 ). Let your 3d bed heat faster and keep warm during printing. As usual, with silicone heating pad using together.
• Dimensions: (L*W*H): 220mm*220mm*8mm ( more thickness). Can cut for smaller size.
• See more on Amazon...

Features

• Packing List: 2 x 1Meter 24V 40W Heater Cartridge.
• Application: a good replacement for the 40w Prusa heater cartridges, compatible with 3d printer Prus i3 mk3/mk3s/mk3s+ V6 hotend.
• Specification: Power: 24V 40W, Diameter of heating head: 6mm(length 15mm); wire length:1meter/39.3inch.
• Advantage: This heater has high quality, and uses closed stainless steel sleeve, much higher quality than the common heating tube on the market.Safe working temperature: 0-285 .
• Notification: Please check it's 24V(Not 12V) 40W and measure the heater length that your 3D printer use at present to make sure our product is suitable for you.
• See more on Amazon...

Features

• Upgrade Prusa Build Plate A new Double Sided heated bed sheet: Smooth PEY + Textured PEI. One side is a textured PEI bed which presents the frosted surface with a distinctive frosted touch. Another side is coated with a smooth PEY sheet which has a Starry & Fine Sequins pattern that shines brightly. The most important thing, the Stars and Dots pattern will be left on the printing model, which brings endless fun to your 3d printing. How Beautiful and Magical!
• A New Shiny Prusa Bed Plate The smooth PEY side is the latest printing surface in Prusa i3 mk3 parts, Size 254X241mm/10x9.5inch. Flaring stars and dots fill the entire spring plate, which makes itself beautiful as a picture. Another magical thing, it presents different patterns under different intensities of light and angles. This is its distinctive feature from other 3d printer bed mats, such as peo plate, pei sheet or PET plate sheet etc.
• Wide 3D Printing Material Compatibility Support various 3d printer filaments. After testing, we recommend the PEY layer to print PLA/ TPU/ PETG (Temp Suggestion: 50 C-70 C, 90 C). The textured PEI plate print PLA/ PLA-CF/ PETG/ PC/ ABS/ TPU/ Nylon etc. Printing model is easy to adhere on PEI bed, has a great adhesion, and easy to be removed , just flex slightly to pop your prints right off. In some cases, remove the model directly without taking the printing bed from prusa mk3 3d printer.
• Proven Solution Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (Note:The smooth surface has a factory protective film that needs to be removed.)
• More Support All products are inspected before shipment. If you have any questions about product quality or suggestions, please feel free to contact us via your order ID. We are very grateful for your love and care for the product. 3D printer print bed is our main product, this kind of multicolor PEI - PEY steel plate is not only available in 254x241mm but also in 196x190mm - Prusa Mini/ 235x235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257x257mm - Bambulab X1C P1P P1S.
• See more on Amazon...

Features

• A Genuine 2gt belt replacement: X Y axis synchronous belt kit for Crealty Ender 3 V2. We have tested it on official Ender 3 V2 printer(please refer to our 2nd Picture). If there's something wrong with its length, welcome to discuss it with us via your order ID. Thank you!
• Material: RF Fiber Glass Belt. Stable Operation & Low Noise: high speed transmission cache more stable, with buffer, shock absorption, low noise.
• Size: 2GT timing belt Pitch 2mm width 6mm. X axis Length: 805mm /31.69 inch, Y axis Length:740mm / 29.13 inch. High precision seamless matching synchronization wheel.
• Convenient: Copper buckles have been pressed on both ends of the belt and can be directly installed on 3d printer belt tensioner. Come with extra pair of 2gt belt clamps.
• After Sales Guarantee: each one defective item can have the free replacement or refund, need more help please feel free to email or QA us, we will try our best to service you.
• See more on Amazon...

Features

• Great Upgrade Heatbed Plate Sheet: can install on a hoted bed and glass platform, just fit for PLA TPU Wood filament, not for ABS PETG filament. If need the smooth pei spring steel plate, please search ASIN:B088YXQRZC at our store.
• 2 in 1 Plate: the A plate is flexible and magletic, it is easy to move away from build platform and take away printed models, B plate with strong adhesive, stick on the build surface.
• Please Kindly Note: the plate is with magletic, the temperature (recommended from 50 to 75 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA TPU Wood, not suitable for ABS PETG filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magletism or turn bent.
• Size: 160X130 mm/ 6.2X5.1 inch, fit for V2/ V1/ V3. If you use it on wanhao duplicator i3 mini, you need to cut to fit the bed but works perfectly.
• After-sales Support: each one defective item can have the free replace or refund, If need more further please fell free to email or Q&A us, we and our engineers are very happy to assist you.
• See more on Amazon...

Features

• A must-have 3D Printing Tool Kit: 8pcs pack 1/6" ST tips consist of 2 Conical tips, 1 round tips, 1 Chisel tip, 1 Hook tip, 1 Spoon tip, 1 Shovel tip, 1 Star tip and 1pc 1/4" soldering iron adapter. It is for general soldering applications, spot, line and drag soldering,tinning work.
• Multiple-Use: multi-style modify deburring tool, meet your diverse needs, a good helper to delicately trim your 3d filament printing part, such as PLA, PETG, ABS, TPU on 3d printer Prusa i3 MK52 MK3 MK3S MK3S+ MK4, Voron2.4 R2 Trident3D Voron0.2 Pro. NeptunPro Plus Kobra2Max Pro Vyperr qq-s q5 etc. Most important, it won't ruin or contaminate your parts.
• Easy to Change: It is very easy to change the tip head, it is no need to take off the whole soldering tip,just screw off the tip head from the connector and srew on a new one.
• Wide Compatibility: Perfect Replacement tips to fit FX-888D FX-888 FX-8801 FX-600 tools, Welle wlc100 wp25 wp30 wp35 spg40 sp40n,sp40nus,sp40nkus, 937 936 soldering irons
• High Quality: Made of pure copper core, good thermal conductivity and heat resistance. Each one is electroplated for 72 hour, advanced production process, not easily oxidized.
• See more on Amazon...

Features

• Brushless DC Blower Fan, best DIY replacement extruder hotend parts for Prus i3 MK3 MK3S MK3S+.
• Size: About 50x50x15mm/ 1.9x1.9x0.59 inch; 40x40x10mm/ 1.7x1.7x0.39 inch; Cable Length: about 750mm/ 29.5 inch
• Rated Voltage: 5015 Printing fan DC 5V, 0.35A 5800rmp; 4010 Cooling fan DC 5V, 0.2A, 6800rmp.
• Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won't work properly.
• After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
• See more on Amazon...

Features

• 1. Package Content - You will get 1 pack of Small silicone mat; Ideal with your resin LCD 3D Printers use, such as Elego Saturn3 ultra MSLA- Mars 4 ultra to protect the workstation when dealing with the UV resin transfering with metal or paper filter funnel or resin wash and cure station or placing the flex build plate. This silicone resin mat is a must-have epoxy accessory tool for Resin 3D printer lovers.
• 2. Quality Rubber work Mat - The silicone slap mat is made of environmentally friendly silicone material, non-slip and waterproof, smooth surface; Sturdy and durable material that will not be messed by printer resins, or most glues!
• 3.Easy to Clean & Storage - The 3d printer silicon mat measures 16.1 x 12.2 inch / 410 x 310mm, suit for your resin tank,resin wash station, anycubi wash and cure 3 plus, 3d resin washing bucket. Easy to clean with water or dry-wettable wipes. This small mat is lightweight and soft, can be folded and rolled up for storage, which can be used repeatedly. If need a large silicone slap mat, please search Asin:B0CLGV2WLMat our store.
• 4. Ergonomic Design - Our silicone mat adopts round-arc design; and this rubber mat with lip, can be a good collection of liquid resin, stop overflowing.
• 5. Wide Applications - These silicone desk mat is suitable for crafts, jewelry, casting moulds, resin printing and other DIY tools and material; It also can be used as a general craft mat or soldering mat for its high temp resistance. It can even resist melted solder and the tip of most soldering irons for up to 3 minutes.
• See more on Amazon...

Features

• For 3D Printer Hot Bed/ Platform, bottom connect, can replace original spring leveling.
• New upgraded 3d printing leveling tool, Special design for Ender 3 s1 pro/Anet A8 Wanhao D9 Anycubic Mega i3 and most heated bed.(Not suitable for ENDER 3 and CR10, if you need ENDER 3 and CR10, please search ASIN:B07MH4JQB8)
• This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it better to level your 3D printer.
• The silicone buffers are simply installed instead of the original spring and it is no longer possible movement, your set levels remain!
• After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or Q&A us, we will try our best to service you.
• See more on Amazon...

Features

• Application FDM 3D Printer: This 2pcs open timing drive belts of X axis (974mm) + Y axis (946mm) are only compatible with ELEGO Neptune-3 Plus. Determine which one for the X-axis by comparing the length of both belts. Please confirm your 3d printer model before ordering. We also have another XY axis 2gt timing belt 6mm for ELEGO Neptune-3 Pro, please search Asin:B0CLS483LF at our store. Not for Neptune4, Neptune4 Pro.
• Easy Installation: Drop-in 3d printer replacement part, very easy to install. When replacing the timing belt, the belt tension of tensioner must be reduced to a minimum before it can be removed. Remove the old stock from belt plate and assemble the new. Due to the belt is a consumable part of 3d printer, regular replacement will make your printing result better.
• Stable and Durable: The 3d printer 2GT-6mm drive belt made of reinforced rubber, which has very good durable and corrosion resistance and it will not stretch under normal tension. It is specially developed for 3D printers.
• High Quality 3D Printer Accessories: Due to the special tooth surface, the drive belt is particularly resistant to wear. This means a long belt life and the precise tooth profile provides excellent grip for efficient and quiet transmission.
• Package Include: Belt Buckles have been pressed on one end of the belt, can be installed directly. At the same time, comes with 4pcs extra belt crimps.
• See more on Amazon...

Features

• A necessary spare small stepper motor for Sherba Mini Extruder or Orbite Extruder V1.5, widely work for Most 3D Printer Reprap Ender 3/Ender 3 Pro/ Ender 3 V2/ Ender 5/CR-10/ Voro 2.4 3D printer.
• Kindly note: The drive current of the extruder needs to be adjusted to 0.3- 0.35A (method: adjust the voltage to about 0.28-0.3V or adjust the E-axis drive current by firmware) to prevent the motor from overheating. Please follow the correct usage to keep its serving lifetime.
• Strong torque -Holding torque up to 120mN.m, Low loss stators have good thermal control ability, have the same parameters(rated voltage DC 6.5V¤t 0.5A) and performance good, a perfect replacement.
• Made of high quality stainless steel, lightweight and durable.
• Package includes:1x motor with integrated cable 47.2 inch long.
• See more on Amazon...

Features

• A must-have 3d printer accessory: This 10x15 cable chain is widely used as a component and sevice part in most 3D printers, like Ender 3 V2 Pro Ender 2 Pro Ender 5 Pro Plus Prusa i3 CR10 S S4 S5 Maker Select V2 Creator Pro Finder Wanhao i3 SR etc.
• Internal Size : 10 x 15mm/0.39inch x 0.59inch(H*W), External Size : 14.5 x 22.5mm/0.57inch x 0.88inch(H*W), Total Length : 1Meter/39.4inch. Material: Nylon PA66.
• Wide Application: Suitable for using in reciprocating motion of the occasion, CNC machine tools, electronic equipments, engrving machine, fire machinery, stone machinery, is able to built-in cables, tubing, water pipes, etc. Every segment can be removed and could be combined with the length you need with a screwdriver.
• Easy to Use: Easy installation and repair, free movement, low noise, wear-resistant, high-speed movement. Surface gloss,Low temperature resistance and corrosion resistance. Extra 2 pairs end connectors, can split the integral drag chain into several parts to use.
• What you get? 1Pcs 10*15mm/ 0.39*0.59inch Outside Open drag Chain, extra plus a pair of connectors kit to adjust the length or free assembly into 2 pieces.
• See more on Amazon...

Features

• A must have for 3D Printer Hot Bed/ Platform, bottom connect, serve to replace on your heating bed original springs. They're much stiffer than the stock springs and allow to really crank up the print speeds, so parts finish sooner with no loss in quality.
• Special design for Ender 3 S1 Pro/ Ender 5 plus/ Ender 5 Pro/ Elego Neptune3/ Ant A8 / Wanhao D9 / Megai3 Pro/ SW X1/ Monoprce Make Select or other heated bed that has a auto bed leveling sensor.
• The silicone buffers are simply installed instead of the original spring. After installing, level your printer then it is no longer possible movement, your set levels remain!
• This heat-resistant and pressure-resistant silicone leveling column are made of quality silicone, which help cutting back any vibrations when working, with a 4mm inner diameter makes it better to level your 3D printer.
• What you get? 4Pcs 18mm/ 0.7inch Silicone mount bed If you can not sure the length whether fit for your printer, please email us.
• See more on Amazon...