Fastenere - Buying Guide
Last Updated: 05/03/2024
Share on
Bestselling from Fastenere on Amazon
- 1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 by Fastenere
- 3/8-24 Serrated Flange Hex Lock Nuts, Stainless Steel 304, Bright Finish, Quantity 25 by Fastenere
- #8 x 1-1/4" Deck Screws 316 Marine Grade Stainless Steel, Square Drive, Type 17 Wood Cutting Point, ...
- Fastenere 1/4-20 x 3/4" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper R...
- Fastenere #10 x 3/4" Button Head Torx Security Sheet Metal Screws Stainless Steel Tamper Resistant, ...
- Fastenere Pop Rivets - 1/4" x 3/4" (25pcs) Heavy Duty, Open-End, Stainless Steel, Dome-Head Blind Ri...
- Large Flange Pop Rivets 3/16" x 1" All Aluminum Dome Head Blind 6-16 Gap .876" - 1.00" Quantity 50 b...
- Fastenere Pop Rivets - 1/4" x 1/2" (25pcs) Heavy Duty, Open-End, Aluminum, Dome-Head Blind Rivets, C...
- Large Flange Pop Rivets 3/16" x 3/8" Stainless Steel Blind 6-6 Gap .251" - .375" Quantity 25 by Fastenere
- Large Flange Pop Rivets 1/4" x 1/4" All Steel Large Dome Head Blind 8-4 Gap .126" - .250" Quantity 2...
#1
1/4-20 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 100 by Fastenere
Asin: B01KYBYIEI | Model: 3SNLF904C | PartNumber: 3SNLF904C | Ean: 0842176125398, 0798154188216 | UPC: 842176125398, 798154188216
Height 5/16".
Fastenere Brand Nylon Lock Nuts Made Of Stainless Steel Grade 18-8 Which Offers A High Level Of Chemical And Corrosion Resistance And Strength That Will Out Perform And Out Last All Zinc Plated Fasteners For Years With Out The Need To Perform Costly And Time Consuming Maintenance..
Hex Socket Drive 7/16".
Width Measured From Flat To Flat 7/16".
Features
- For use with an externally threaded item that measures 1/4 inch and has 20 threads per inch.
- Width Measured From Flat to Flat 7/16
- Height 5/16
- Hex Socket Drive 7/16
- Fastenere brand Nylon Lock Nuts made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Dimensions: 6.00 x 4.00 x 1.00 Inches
See On Amazon #2
3/8-24 Serrated Flange Hex Lock Nuts, Stainless Steel 304, Bright Finish, Quantity 25 by Fastenere
Asin: B01LW5GEZ1 | Ean: 0842176128092 | UPC: 842176128092
Overall Height 1/2".
The Basic Alloy. Type 304 (18-8) Is An Austenitic Steel Possessing A Minimum Of 18% Chromium And 8% Nickel, Combined With A Maximum Of 0.08% Carbon. It Is A Nonmagnetic Steel Which Cannot Be Hardened By Heat Treatment, But Instead. Must Be Cold Worked To Obtain Higher Tensile Strengths..
Hex Socket Drive 11/16".
Overall Width 7/8".
Features
- Width Measured From Flat to Flat 11/16"
- Overall Width 7/8
- Overall Height 1/2
- Hex Socket Drive 11/16
- The basic alloy. Type 304 (18-8) is an austenitic steel possessing a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is a nonmagnetic steel which cannot be hardened by heat treatment, but instead. must be cold worked to obtain higher tensile strengths.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Dimensions: 6.00 x 3.00 x 1.00 Inches | Weight: 0.50 Pounds
See On Amazon #3
#8 x 1-1/4" Deck Screws 316 Marine Grade Stainless Steel, Square Drive, Type 17 Wood Cutting Point, Quantity 100, Size Number 8 x 1-1/4" Long by Fastenere
Asin: B018UPHWPM | Model: ssds3168114-100 | PartNumber: ssds3168114-100 | Ean: 0842176117119 | UPC: 842176117119
#2 Robertson Drive ( Square ).
Deck Screws Have A Type-17 (Auger Type) Thread Cutting Tip For Installation Into Decking Materials. They Have Bugle Heads That Allows The Screw To Depress The Wood Surface.
Made Of Highly Corrosion Resistant 316 Marine Grade Stainless Steel. Type 316 Is Also Used Extensively For Surgical Implants Within The Hostile Environment Of The Body..
Screw Length Measured From Top Of Flat To Tip Of Screw 1-1/4" (1.25") - Screw Head Diameter 0.340".
Features
- Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8
- Screw length measured from top of flat to tip of screw 1-1/4 (1.25) - Screw head Diameter 0.340
- #2 Robertson Drive ( Square )
- Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body.
- Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Dimensions: 3.00 x 2.00 x 1.00 inches | Weight: 0.52 pounds
See On Amazon #4
Fastenere 1/4-20 x 3/4" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 10 Thread Size 1/4-20 x 3/4" Length
Asin: B00VVILGUS | Ean: 0842176114255 | UPC: 842176114255
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 3/4" In Length And Features A 1/4-20 Thread Size, Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T27 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: This Set Features Tamper-Proof Torx Machine Screws In Stainless Steel, Ideal For Various Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Offering Durability And Security For Your Project Needs..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: This set features tamper-proof Torx machine screws in stainless steel, ideal for various secure installations and repairs in electronics, automotive, and TV mounts, offering durability and security for your project needs.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 3/4 in length and features a 1/4-20 thread size, ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T27 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Weight: 0.30 pounds
See On Amazon #5
Fastenere #10 x 3/4" Button Head Torx Security Sheet Metal Screws Stainless Steel Tamper Resistant, Qty 25 Number 10 Size x 3/4" Length
Asin: B00SBYYV34 | Model: buttonsecuritysms10034-25 | PartNumber: buttonsecuritysms10034-25 | Ean: 0842176114842 | UPC: 842176114842
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 3/4" In Length And Has A Diameter Size Of #10 (0.190"), Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T25 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: Featuring Tamper-Proof Torx Machine Screws In Stainless Steel, Perfect For Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Ensuring Durability And Security, With A Head Diameter Of 0.361" And Head Height Of 0.101"..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: Featuring tamper-proof Torx machine screws in stainless steel, perfect for secure installations and repairs in electronics, automotive, and TV mounts, ensuring durability and security, with a head diameter of 0.361 and head height of 0.101.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 3/4 in length and has a diameter size of #10 (0.190), ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T25 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Weight: 0.00 pounds
See On Amazon #6
Fastenere Pop Rivets - 1/4" x 3/4" (25pcs) Heavy Duty, Open-End, Stainless Steel, Dome-Head Blind Rivets, Corrosion-Resistant, High Tensile & Shear Strength, 8-12 Gap 0.626"-0.750"
Asin: B07MF4GK2N | Model: Stainless Steel Pop Rivets | PartNumber: Stainless Steel Pop Rivets | Ean: 0842176190310 | UPC: 842176190310
Stainless Steel Mandrel For Enhanced Perfomance: The Rivets Come With A Stainless Steel Mandrel That Is Pulled Into Or Against The Rivet Body During The Fastening Process, Breaking Near The Mandrel Shank's Junction With Its Upset End. This Pop Rivet Tool Design Provides Greater Tensile And Shear Values Compared To Aluminum Rivets With Aluminum Mandrels..
Good Performance In Assembly Connections: Fastenere's Open-End Blind Pop Rivets, Part Of Our Versatile Assortment Kit Ensure Compliance With Dimensional, Mechanical, And Performance Requirements. Count On Precision And Reliability, Meeting Both Inch And Metric Break Mandrel Blind Rivet Specifications..
Self-Contained Mechanical Feature: These Pop Rivets Stainless Steel Blind Fasteners Boast A Self-Contained Mechanical Feature, Namely A Mandrel, Allowing For The Formation Of An Upset On The Blind End And Expansion Of The Pop Rivets Assortment Kit Shank During Setting. This Blind Rivets Ensures A Secure And Reliable Joining Of Component Parts In Your Assembly Projects..
Stainless Steel Construction: Our Pop Rivets, Are Expertly Crafted From Grade 305 Stainless Steel. This Choice Not Only Ensures Superior Durability But Also Offers Excellent Corrosion Resistance. Optimal For Fastening Materials With Similar Mechanical And Physical Properties, These Stainless Steel Rivets Elevate Your Projects With Lasting Strength And Resilience..
Features
- VERSATILE DOME HEAD DESIGN: Fastenere's Pop Rivets features the popular dome head style, providing a sleek, low-profile finish. The heavy duty rivet tool head is slightly rounded, twice as wide as the pop rivets body diameter, ensuring a clean and polished appearance for your projects.
- STAINLESS STEEL CONSTRUCTION: Our pop rivets, are expertly crafted from grade 305 stainless steel. This choice not only ensures superior durability but also offers excellent corrosion resistance. Optimal for fastening materials with similar mechanical and physical properties, these stainless steel rivets elevate your projects with lasting strength and resilience.
- STAINLESS STEEL MANDREL FOR ENHANCED PERFOMANCE: The rivets come with a stainless steel mandrel that is pulled into or against the rivet body during the fastening process, breaking near the mandrel shank's junction with its upset end. This pop rivet tool design provides greater tensile and shear values compared to aluminum rivets with aluminum mandrels.
- SELF-CONTAINED MECHANICAL FEATURE: These pop rivets stainless steel blind fasteners boast a self-contained mechanical feature, namely a mandrel, allowing for the formation of an upset on the blind end and expansion of the pop rivets assortment kit shank during setting. This blind rivets ensures a secure and reliable joining of component parts in your assembly projects.
- GOOD PERFORMANCE IN ASSEMBLY CONNECTIONS: Fastenere's open-end blind pop rivets, part of our versatile assortment kit ensure compliance with dimensional, mechanical, and performance requirements. Count on precision and reliability, meeting both inch and metric break mandrel blind rivet specifications.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #7
Large Flange Pop Rivets 3/16" x 1" All Aluminum Dome Head Blind 6-16 Gap .876" - 1.00" Quantity 50 by Fastenere
Asin: B07N6LL15C | Model: Large Flange Rivets | PartNumber: Large Flange Rivets | Ean: 0842176191515 | UPC: 842176191515
The Aluminum Mandrel Is Pulled Into Or Against The Rivet Body, Breaking At Or Near The Junction Of The Mandrel Shank And Its Upset End. Aluminum/Aluminum Rivets Have The Lowest Tensile And Shear Values Of All Break Mandrel Rivets..
Fastenere Branded Open End Blind Pop Rivets Meet Sae J-1200 Standards Which Establishes The Dimensional, Mechanical, And Performance Requirements Of Inch And Metric Break Mandrel Blind Rivets Suitable For Use In Joining The Component Parts Of An Assembly..
An Aluminum Blind Fastener Which Has A Self Contained Mechanical Feature (A Mandrel) Which Permits The Formation Of An Upset On The Blind End Of The Rivet And Expansion Of The Rivet Shank During The Setting To Join The Component Parts Of An Assembly.
Made Of Aluminum Alloy 5050, 5052, Or Equivalent. Aluminum Alloys Have Excellent Corrosion Resistance..
Features
- Large Flange rivets offer a wider bearing surface and are preferred where brittle or soft materials are being assembled to rigid surfaces.
- Made of Aluminum Alloy 5050, 5052, or equivalent. Aluminum alloys have excellent corrosion resistance.
- The aluminum mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Aluminum/Aluminum rivets have the lowest tensile and shear values of all break mandrel rivets.
- An aluminum blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly
- Fastenere branded open end blind pop rivets meet SAE J-1200 Standards which establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Weight: 0.00 pounds
See On Amazon #8
Fastenere Pop Rivets - 1/4" x 1/2" (25pcs) Heavy Duty, Open-End, Aluminum, Dome-Head Blind Rivets, Corrosion-Resistant, Low Tensile & Shear Strength, 8-8 Gap 0.376"-0.500"
Asin: B07KPRPJGG | Model: Aluminum Pop Rivets | PartNumber: Aluminum Pop Rivets | Ean: 0842176189598 | UPC: 842176189598
Aluminum Mandrel For Enhanced Perfomance: The Rivets Come With A Aluminum Mandrel That Is Pulled Into Or Against The Rivet Body During The Fastening Process, Breaking Near The Mandrel Shank's Junction With Its Upset End. This Pop Rivet Tool Design Provides Greater Tensile And Shear Values Compared To Aluminum Rivets With Aluminum Mandrels..
Good Performance In Assembly Connections: Fastenere's Open-End Blind Pop Rivets, Part Of Our Versatile Assortment Kit Ensure Compliance With Dimensional, Mechanical, And Performance Requirements. Count On Precision And Reliability, Meeting Both Inch And Metric Break Mandrel Blind Rivet Specifications..
Self-Contained Mechanical Feature: These Pop Rivets Aluminum Blind Fasteners Boast A Self-Contained Mechanical Feature, Namely A Mandrel, Allowing For The Formation Of An Upset On The Blind End And Expansion Of The Pop Rivets Assortment Kit Shank During Setting. This Blind Rivets Ensures A Secure And Reliable Joining Of Component Parts In Your Assembly Projects..
Corrosion-Resistant Aluminum Alloy Construction: Our Pop Rivets, Part Of The Versatile Assortment Kit, Are Meticulously Crafted From Aluminum Alloy 5050, 5052, Or Equivalent. This Rivets Ensures Not Only The Durability Of Your Connections But Also Provides Excellent Corrosion Resistance, Making Them Ideal For A Wide Range Of Applications..
Features
- VERSATILE DOME HEAD DESIGN: Fastenere's Pop Rivets features the popular dome head style, providing a sleek, low-profile finish. The aluminum aloy rivet is slightly rounded, twice as wide as the pop rivets body diameter, ensuring a clean and polished appearance for your projects.
- CORROSION-RESISTANT ALUMINUM ALLOY CONSTRUCTION: Our pop rivets, part of the versatile assortment kit, are meticulously crafted from Aluminum Alloy 5050, 5052, or equivalent. This rivets ensures not only the durability of your connections but also provides excellent corrosion resistance, making them ideal for a wide range of applications.
- ALUMINUM MANDREL FOR ENHANCED PERFOMANCE: The rivets come with a aluminum mandrel that is pulled into or against the rivet body during the fastening process, breaking near the mandrel shank's junction with its upset end. This pop rivet tool design provides greater tensile and shear values compared to aluminum rivets with aluminum mandrels.
- SELF-CONTAINED MECHANICAL FEATURE: These pop rivets aluminum blind fasteners boast a self-contained mechanical feature, namely a mandrel, allowing for the formation of an upset on the blind end and expansion of the pop rivets assortment kit shank during setting. This blind rivets ensures a secure and reliable joining of component parts in your assembly projects.
- GOOD PERFORMANCE IN ASSEMBLY CONNECTIONS: Fastenere's open-end blind pop rivets, part of our versatile assortment kit ensure compliance with dimensional, mechanical, and performance requirements. Count on precision and reliability, meeting both inch and metric break mandrel blind rivet specifications.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #9
Large Flange Pop Rivets 3/16" x 3/8" Stainless Steel Blind 6-6 Gap .251" - .375" Quantity 25 by Fastenere
Asin: B07MLT6WL9 | Model: Large Flange Pop Rivets | PartNumber: Large Flange Pop Rivets | Ean: 0842176191676 | UPC: 842176191676
The Steel Mandrel Is Pulled Into Or Against The Rivet Body, Breaking At Or Near The Junction Of The Mandrel Shank And Its Upset End. Stainless Steel Rivets Offer The Highest Tensile, Shear, And Break Load Strengths Of All Rivet Materials..
Fastenere Branded Open End Blind Pop Rivets Meet Sae J-1200 Standards Which Establishes The Dimensional, Mechanical, And Performance Requirements Of Inch And Metric Break Mandrel Blind Rivets Suitable For Use In Joining The Component Parts Of An Assembly..
A Stainless Steel Blind Fastener Which Has A Self Contained Mechanical Feature (A Mandrel) Which Permits The Formation Of An Upset On The Blind End Of The Rivet And Expansion Of The Rivet Shank During The Setting To Join The Component Parts Of An Assembly.
Made Of Grade 305 Stainless Steel Which Provides Excellent Corrosion Resistance. Stainless Steel Rivets Should Be Used When Fastening Materials Of Similar Mechanical And Physical Properties..
Features
- Large Flange rivets offer a wider bearing surface and are preferred where brittle or soft materials are being assembled to rigid surfaces.
- Made of grade 305 stainless steel which provides excellent corrosion resistance. Stainless steel rivets should be used when fastening materials of similar mechanical and physical properties.
- The steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Stainless steel rivets offer the Highest tensile, shear, and break load strengths of all rivet materials.
- A stainless steel blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly
- Fastenere branded open end blind pop rivets meet SAE J-1200 Standards which establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #10
Large Flange Pop Rivets 1/4" x 1/4" All Steel Large Dome Head Blind 8-4 Gap .126" - .250" Quantity 25 by Fastenere
Asin: B07MVNMTHD | Model: All Steel Pop Rivets | PartNumber: All Steel Pop Rivets | Ean: 0842176191935 | UPC: 842176191935
The Steel Mandrel Is Pulled Into Or Against The Rivet Body, Breaking At Or Near The Junction Of The Mandrel Shank And Its Upset End. The Steel Mandrel Gives This Style Of Rivet Greater Tensile And Shear Values Than Aluminum Rivets With Aluminum Mandrels..
Fastenere Branded Open End Blind Pop Rivets Meet Sae J-1200 Standards Which Establishes The Dimensional, Mechanical, And Performance Requirements Of Inch And Metric Break Mandrel Blind Rivets Suitable For Use In Joining The Component Parts Of An Assembly..
A Steel Blind Fastener Which Has A Self Contained Mechanical Feature (A Mandrel) Which Permits The Formation Of An Upset On The Blind End Of The Rivet And Expansion Of The Rivet Shank During The Setting To Join The Component Parts Of An Assembly.
Made Of Low Carbon Steel And Should Be Used When Fastening Materials Of Similar Mechanical And Physical Properties..
Features
- Large Flange rivets offer a wider bearing surface and are preferred where brittle or soft materials are being assembled to rigid surfaces.
- Made of low carbon steel and should be used when fastening materials of similar mechanical and physical properties.
- The steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. The steel mandrel gives this style of rivet greater tensile and shear values than aluminum rivets with aluminum mandrels.
- A steel blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly
- Fastenere branded open end blind pop rivets meet SAE J-1200 Standards which establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #11
Pop Rivets 1/4" x 3/4" Aluminum Body Steel Mandrel Dome Head Blind 8-12 Gap .626" - .750" Quantity 25 by Fastenere
Asin: B07MJVJBJQ | Model: Aluminum Pop Rivets Steel Mandrel | PartNumber: Aluminum Pop Rivets Steel Mandrel | Ean: 0842176189994 | UPC: 842176189994
Made Of Aluminum Alloy 5056, 5154, Or Equivalent. Aluminum Alloys Have Excellent Corrosion Resistance..
An Aluminum Blind Fastener Which Has A Self Contained Mechanical Feature (A Mandrel) Which Permits The Formation Of An Upset On The Blind End Of The Rivet And Expansion Of The Rivet Shank During The Setting To Join The Component Parts Of An Assembly.
The Steel Mandrel Is Pulled Into Or Against The Rivet Body, Breaking At Or Near The Junction Of The Mandrel Shank And Its Upset End. The Steel Mandrel Gives This Style Of Rivet Greater Tensile And Shear Values Than Aluminum Rivets With Aluminum Mandrels..
Dome Head Is The Most Commonly Specified Rivet Head Style Because Of Its Low Profile And Clean Finished Appearance. It Is Slightly Rounded And Twice As Wide As The Rivet Body Diameter..
Features
- Open end blind rivets are tubular rivets with a mandrel through the center. The entire rivet assembly is inserted into a hole drilled through the parts to be joined, and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and snaps off the mandrel.
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
- Made of Aluminum Alloy 5056, 5154, or equivalent. Aluminum alloys have excellent corrosion resistance.
- The steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. The steel mandrel gives this style of rivet greater tensile and shear values than aluminum rivets with aluminum mandrels.
- An aluminum blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #12
1/4" Solid Brass Flat Washers, Commercial Standard, Grade 360, Plain Finish, Quantity 100
Asin: B07FYN89BZ | Model: Flat Washers | PartNumber: Flat Washers | Ean: 0842176162928 | UPC: 842176162928
Made Of Grade 360 Brass, Known For Its Strength And Resistance To Corrosion With Properties Closely Resembling That Of Steel And Offering The Highest Machinability Of All Copper Alloys..
Brass Flat Washers Are Suitable For High Water Temperatures Soft Or Hard Water Or Where Chloride Is Present And Offers A High Level Of Corrosion Resistance.
Fastenere Brass Fasteners Are Cleaned And Applied With A Sealer That Brings Out The Bright Yellow Brass Finish And Helps To Maintain It..
Flat Washers Are One Of The Most Versitile Pieces Of Hardware That Can Be Used In Not Only Nut And Bolt Fastenening Situations But As Shims Or To Protect A Surface From Damage.
Features
- Flat washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head.
- Flat washers are one of the most versitile pieces of hardware that can be used in not only nut and bolt fastenening situations but as shims or to protect a surface from damage
- Made of Grade 360 Brass, known for its strength and resistance to corrosion with properties closely resembling that of steel and offering the highest machinability of all copper alloys.
- Fastenere brass fasteners are cleaned and applied with a sealer that brings out the bright yellow brass finish and helps to maintain it.
- Brass flat washers are suitable for high water temperatures soft or hard water or where chloride is present and offers a high level of corrosion resistance
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #13
1/4 x 2" Fender Washers, Large Diameter, Stainless Steel 18-8, Plain Finish, Quantity 25 by Fastenere
Asin: B07JQ3P21K | Model: Large Diameter Washers | PartNumber: Large Diameter Washers
The Vast Majority Of Stainless Steel Fasteners Are Produced With Metals From The Austenitic Family. Their High Levels Of Chromium And Nickel Provide Tough Corrosion Resistance And The Ability To Withstand Considerable Physical Strain Without Fracturing, Albeit At A Higher Cost Than The Martensitic Varieties..
Fastenere Brand Fender Washers Made Of 18-8 Stainless Steel Will Outlast And Outperform Other Washers Made Of Steel Or Zinc For Years To Come.
Made Of Stainless Steel Grade 18-8 Which Offers A High Level Of Chemical And Corrosion Resistance And Strength That Will Out Perform And Out Last All Zinc Plated Fasteners For Years With Out The Need To Perform Costly And Time Consuming Maintenance..
A Fender Washer Though Similar In Shape To A Standard Washer The Outside Diameter Is Much Larger In Proportion To The Center Hole..
Features
- Fender washers offer a bolt or screw a wider bearing surface that will disperse the load weight to a greater surface area and ensure that the nut or bolt is pressed up against a smooth surface reducing the chances the fastener loosening over time because of contact with an uneven surface as well as keeping a fastener from pulling through a hole that is larger than the diameter of the head.
- A fender washer though similar in shape to a standard washer the outside diameter is much larger in proportion to the center hole.
- The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties.
- Made of stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance and strength that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance.
- Fastenere Brand Fender Washers made of 18-8 stainless steel will outlast and outperform other washers made of steel or zinc for years to come
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Weight: 1.15 pounds
See On Amazon #14
Aluminum Pop Rivets 3/16" x 1/4" Flat Countersunk Head Blind 6-4 Gap .188" - .250" Quantity 100 By Fastenere
Asin: B07P6DS8LV | Model: Countersunk Rivets | PartNumber: Countersunk Rivets | Ean: 0842176191027 | UPC: 842176191027
The Aluminum Mandrel Is Pulled Into Or Against The Rivet Body, Breaking At Or Near The Junction Of The Mandrel Shank And Its Upset End. Aluminum/Aluminum Rivets Have The Lowest Tensile And Shear Values Of All Break Mandrel Rivets..
Fastenere Branded Open End Blind Pop Rivets Meet Sae J-1200 Standards Which Establishes The Dimensional, Mechanical, And Performance Requirements Of Inch And Metric Break Mandrel Blind Rivets Suitable For Use In Joining The Component Parts Of An Assembly..
An Aluminum Blind Fastener Which Has A Self Contained Mechanical Feature (A Mandrel) Which Permits The Formation Of An Upset On The Blind End Of The Rivet And Expansion Of The Rivet Shank During The Setting To Join The Component Parts Of An Assembly.
Made Of Aluminum Alloy 5050, 5052, Or Equivalent. Aluminum Alloys Have Excellent Corrosion Resistance..
Features
- The Countersunk head style provides a smooth offside surface and sufficient clearance for moving parts which pass over the rivet head.
- Made of Aluminum Alloy 5050, 5052, or equivalent. Aluminum alloys have excellent corrosion resistance.
- The aluminum mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Aluminum/Aluminum rivets have the lowest tensile and shear values of all break mandrel rivets.
- An aluminum blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly
- Fastenere branded open end blind pop rivets meet SAE J-1200 Standards which establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #15
1/2-13 x 1-1/2" Button Head Socket Cap Screws 18-8 Stainless Steel, Quantity 5, Allen Hex Drive by Fastenere
Asin: B00YSSFVKO | Ean: 0842176115559 | UPC: 842176115559
Head Height 0.265".
18-8 Stainless Steel Provides Strength And Offers Good Corrosion Resistance In Many Environments..
Allen Hex Drive Size 5/16".
Head Diameter 0.875".
Features
- Thread Diameter 0.500"
- Head Diameter 0.875
- Head Height 0.265
- Allen Hex Drive Size 5/16
- 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Dimensions: 6.00 x 4.00 x 1.00 inches | Weight: 0.47 pounds
See On Amazon #16
#8 x 1 Deck Screws Stainless Steel Square Drive Wood/Composite Qty 100
Asin: B07GND9FVM | Model: Square Drive Deck Screws | PartNumber: Square Drive Deck Screws | Ean: 1160011749523
#8.
Screws.
Square Drive.
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #17
Fastenere 1/4-20 x 2" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 10 Thread Size 1/4-20 x 1-1/2" Length
Asin: B00VVILVR6 | Model: buttonsecurityms1420112-10 | PartNumber: buttonsecurityms1420112-10 | Ean: 0842176114293 | UPC: 842176114293
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 2" In Length And Features A 1/4-20 Thread Size, Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T27 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: This Set Features Tamper-Proof Torx Machine Screws In Stainless Steel, Ideal For Various Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Offering Durability And Security For Your Project Needs..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: This set features tamper-proof Torx machine screws in stainless steel, ideal for various secure installations and repairs in electronics, automotive, and TV mounts, offering durability and security for your project needs.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 2 in length and features a 1/4-20 thread size, ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T27 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
See On Amazon #18
Fastenere 10-32 x 1/2" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 25 Thread Size 10-32 x 1/2" Length
Asin: B00VVIO25E | Ean: 0842176114163 | UPC: 842176114163
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 1/2" In Length And Features A 10-32 Thread Size, Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T25 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: This Set Features Tamper-Proof Torx Machine Screws In Stainless Steel, Ideal For Various Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Offering Durability And Security For Your Project Needs..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: This set features tamper-proof Torx machine screws in stainless steel, ideal for various secure installations and repairs in electronics, automotive, and TV mounts, offering durability and security for your project needs.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 1/2 in length and features a 10-32 thread size, ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T25 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Dimensions: 2.80 x 1.60 x 0.50 inches
See On Amazon #19
#8 x 1" Flat Head Torx Security Sheet Metal Screws Stainless Steel Tamper Resistant, Qty 25 Number 8 Size x 1" Length by Fastenere
Asin: B00SFZ0V06 | Ean: 0842176115085 | UPC: 842176115085
Head Height: 0.112".
Screw Size: #8 (0.164").
Length Measured From Top Of The Head: 1".
Head Diameter: 0.327".
Features
- Driver Size: T20 Bit Inlcuded
- Head Diameter: 0.327
- Head Height: 0.112
- Length measured from top of the head: 1
- Screw Size: #8 (0.164)
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
See On Amazon #20
Fastenere 10-24 x 1" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 25 Thread Size 10-24 x 1" Length
Asin: B00VVINLEW | Ean: 0842176114156 | UPC: 842176114156
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 1" In Length And Features A 10-24 Thread Size, Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T25 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: This Set Features Tamper-Proof Torx Machine Screws In Stainless Steel, Ideal For Various Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Offering Durability And Security For Your Project Needs..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: This set features tamper-proof Torx machine screws in stainless steel, ideal for various secure installations and repairs in electronics, automotive, and TV mounts, offering durability and security for your project needs.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 1 in length and features a 10-24 thread size, ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T25 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Weight: 0.30 pounds
See On Amazon #21
Fastenere 3/8-16 x 2" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 5 Thread Size 3/8-16 x 2" Length
Asin: B00VVIOJSY | Ean: 0842176114415 | UPC: 842176114415
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 2" In Length And Features A 3/8-16 Thread Size, Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T45 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: This Set Features Tamper-Proof Torx Machine Screws In Stainless Steel, Ideal For Various Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Offering Durability And Security For Your Project Needs..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: This set features tamper-proof Torx machine screws in stainless steel, ideal for various secure installations and repairs in electronics, automotive, and TV mounts, offering durability and security for your project needs.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 2 in length and features a 3/8-16 thread size, ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T45 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
See On Amazon #22
#8 x 1-1/4" Pan Head Sheet Metal Screws, Full Thread, Square Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces by Fastenere
Asin: B01CRE7HVG | Ean: 0842176108964 | UPC: 842176108964
Head Height 0.120".
18-8 Stainless Steel Provides Strength And Offers Good Corrosion Resistance In Many Environments..
Square Drive Size #2.
Head Diameter 0.322".
Features
- Thread Diameter 0.164"
- Head Diameter 0.322
- Head Height 0.120
- Square Drive Size #2
- 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #23
Fastenere 6-32 x 3/8" Button Head Torx Security Machine Screw Bolt Screws Stainless Steel Tamper Resistant, Qty 25 Thread Size 6-32 x 3/8" Length
Asin: B00VVIL162 | Ean: 0842176114583 | UPC: 842176114583
Precision Engineering: Crafted With Precision, Each Stainless Steel Screw Measures 3/8" In Length And Features A 6-32 Thread Size, Ideal For Diverse Applications Ranging From Small Electronics To Sizable Mounts, Ensuring Security And A Perfect Fit For Any Project..
Durable Material: Crafted From Good Quality Stainless Steel, Fastenere's Diverse Assortment Of Screws Caters To A Range Of Project Sizes And Types, From Electronics To Mounts, Ensuring Robustness And Corrosion Resistance For Secure, Lasting Installations..
Easy Installation: Included Is A T10 Torx Bit For Easy Installation, Enhancing Security And Preventing Tampering, Perfect For Both Professional And Diy Projects Involving Electronics, Automotive, And Mounts Of Different Sizes..
Versatile Project Kit: This Set Features Tamper-Proof Torx Machine Screws In Stainless Steel, Ideal For Various Secure Installations And Repairs In Electronics, Automotive, And Tv Mounts, Offering Durability And Security For Your Project Needs..
Features
- ENHANCED SECURITY: Fastenere's tamper-resistant Torx screws, made of stainless steel, are machine bolts designed to prevent unauthorized removal, typically for safety reasons or to thwart theft. These security screws are frequently used in places like public restrooms, educational institutions, correctional facilities, as well as on vehicles, boats, public transportation, and in electronic devices.
- VERSATILE PROJECT KIT: This set features tamper-proof Torx machine screws in stainless steel, ideal for various secure installations and repairs in electronics, automotive, and TV mounts, offering durability and security for your project needs.
- PRECISION ENGINEERING: Crafted with precision, each stainless steel screw measures 3/8 in length and features a 6-32 thread size, ideal for diverse applications ranging from small electronics to sizable mounts, ensuring security and a perfect fit for any project.
- EASY INSTALLATION: Included is a T10 Torx bit for easy installation, enhancing security and preventing tampering, perfect for both professional and DIY projects involving electronics, automotive, and mounts of different sizes.
- DURABLE MATERIAL: Crafted from good quality stainless steel, Fastenere's diverse assortment of screws caters to a range of project sizes and types, from electronics to mounts, ensuring robustness and corrosion resistance for secure, lasting installations.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Lightning Stainless
Weight: 0.30 pounds
See On Amazon #24
#5 x 3/8" Pan Head Sheet Metal Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Self-Tapping, Quantity 100 Pieces by Fastenere
Asin: B01CEZT5W2 | Ean: 0842176107561 | UPC: 842176107561
Head Height 0.089".
18-8 Stainless Steel Provides Strength And Offers Good Corrosion Resistance In Many Environments..
Phillips Drive Size #2.
Head Diameter 0.245".
Features
- Thread Diameter 0.125"
- Head Diameter 0.245
- Head Height 0.089
- Phillips Drive Size #2
- 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #25
1/4-20 Rod Coupling Nuts, Stainless Steel 18-8, Plain Finish, Quantity 25 by Fastenere
Asin: B01FKW5F0M | Ean: 0842176121444 | UPC: 842176121444
Features
- Fastenere Brand Stainless Steel Fasteners are backed by Fastenere Industry leading customer service and Guaranteed Satisfaction. These Fasteners offer a high level of corrosion resistance and will outperform other fasteners for years to come.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Dimensions: 0.88 x 0.00 x 0.37 inches
See On Amazon #26
1/2-13 x 1-3/4" Flat Head Socket Cap Screws, Allen Socket Drive, Stainless Steel 18-8, Full Thread, Bright Finish, Machine Thread, Quantity 25 by Fastenere
Asin: B07GVB42MB | Model: Flat Head Socket Cap Screw | PartNumber: Flat Head Socket Cap Screw | Ean: 1160014281648
82 Degree Flat Head Is The Most Common Countersunk Screw Head Angle.
Flat Head Countersunk Machine Screws Length Are Measured From The Top Of The Flat Head To The End Of The Thread And The Thread Length Is The Overall Length Minus The Height Of The Head.
These Flat Socket Cap Screws Are Made Of A High Quality 18-8 Grade Stainless Steel That Offers A Great Corrosion And Chemical Resistance That Will Stand Strong Against The Elements..
Flat Head Screws Have A Flat Top That Tapers Down To A Cone Shape That Will Sit Flush Into A Countersunk Hole And Give A Finished Appearance.
Features
- Flat head socket cap screws have a internal hex drive that can be driven with an allen key or hex bit and a machine thread that will match up to any internally threaded item with the same machined thread patern which is apart of the unified thread system
- Flat head screws have a flat top that tapers down to a cone shape that will sit flush into a countersunk hole and give a finished appearance
- 82 degree flat head is the most common countersunk screw head angle
- These flat socket cap screws are made of a high quality 18-8 grade stainless steel that offers a great corrosion and chemical resistance that will stand strong against the elements.
- Flat head countersunk machine screws length are measured from the top of the flat head to the end of the thread and the thread length is the overall length minus the height of the head
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Weight: 3.20 pounds
See On Amazon #27
#10 x 1-1/2" Flat Head Wood Screws, Phillips Drive, Type 316 Marine Grade Stainless Steel, Partial Thread, Bright Finish, Quantity 50 by Fastenere
Asin: B01MFAWQTD | Ean: 0842176143460 | UPC: 842176143460
Head Height 0.116".
Type 316 Stainless Steel Is For Marine And Severe Environments.The Carbon Content Is Held To 0.08% Maximum, While The Nickel Content Is Increased Slightly. What Distinguishes Type 316 From Type 304 Is The Addition Of Molybdenum Up To A Maximum Of 3%. Molybdenum Increases The Corrosion Resistance Of This Chromium-Nickel Alloy To Withstand Attack By Many Industrial Chemicals And Solvents, And, In Particular, Inhibits Pitting Caused By Chlorides..
Phillips Drive #2.
Head Diameter 0.362".
Features
- Thread Diameter 0.190"
- Head Diameter 0.362
- Head Height 0.116
- Phillips Drive #2
- Type 316 Stainless steel is for Marine and severe environments.The carbon content is held to 0.08% maximum, while the nickel content is increased slightly. What distinguishes Type 316 from Type 304 is the addition of molybdenum up to a maximum of 3%. Molybdenum increases the corrosion resistance of this chromium-nickel alloy to withstand attack by many industrial chemicals and solvents, and, in particular, inhibits pitting caused by chlorides.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #28
Large Flange Pop Rivets 3/16" x 1" Aluminum Body Steel Mandrel Large Dome Head 6-16 Gap .876" - 1.00" Quantity 50 by Fastenere
Asin: B07MXPZMNW | Model: Large Flange Pop Rivets | PartNumber: Large Flange Pop Rivets | Ean: 0842176192161 | UPC: 842176192161
The Steel Mandrel Is Pulled Into Or Against The Rivet Body, Breaking At Or Near The Junction Of The Mandrel Shank And Its Upset End. The Steel Mandrel Gives This Style Of Rivet Greater Tensile And Shear Values Than Aluminum Rivets With Aluminum Mandrels..
Fastenere Branded Open End Blind Pop Rivets Meet Sae J-1200 Standards Which Establishes The Dimensional, Mechanical, And Performance Requirements Of Inch And Metric Break Mandrel Blind Rivets Suitable For Use In Joining The Component Parts Of An Assembly..
An Aluminum Blind Fastener Which Has A Self Contained Mechanical Feature (A Mandrel) Which Permits The Formation Of An Upset On The Blind End Of The Rivet And Expansion Of The Rivet Shank During The Setting To Join The Component Parts Of An Assembly.
Made Of Aluminum Alloy 5056, 5154, Or Equivalent. Aluminum Alloys Have Excellent Corrosion Resistance..
Features
- Large Flange rivets offer a wider bearing surface and are preferred where brittle or soft materials are being assembled to rigid surfaces.
- Made of Aluminum Alloy 5056, 5154, or equivalent. Aluminum alloys have excellent corrosion resistance.
- The steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. The steel mandrel gives this style of rivet greater tensile and shear values than aluminum rivets with aluminum mandrels.
- An aluminum blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly
- Fastenere branded open end blind pop rivets meet SAE J-1200 Standards which establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon #29
1/4-28 x 3" Button Head Socket Cap Screws, Allen Socket Drive, Black Oxide, Alloy Steel, Fully Threaded, Machine Thread, Quantity 10
Asin: B01I28YING | Ean: 0842176122441 | UPC: 842176122441
Head Height 0.132".
Button Socket Cap Screws Offer A Wider Bearing Surface And High Tensile Strength But Are Still Low Profile Like Other Socket Cap Screws..
Allen Hex Drive Size 5/32".
Head Diameter 0.437".
Features
- Thread Diameter 0.250"
- Head Diameter 0.437
- Head Height 0.132
- Allen Hex Drive Size 5/32
- Button socket cap screws offer a wider bearing surface and high tensile strength but are still low profile like other socket cap screws.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
Dimensions: 6.00 x 3.00 x 1.00 inches
See On Amazon #30
#0 x 3/8" Round Head Wood Screws, Solid Brass, Slotted Drive, Partially Threaded, Quantity 100
Asin: B07D1RM1K1 | Model: Wood Screws | PartNumber: Wood Screws | Ean: 0842176161495 | UPC: 842176161495
The Slot Screw Drive Has A Single Slot In The Fastener Head And Is Driven By A Flat-Bladed Screwdriver Or Common Blade Object. This Drive Is The Best Choice For The Future Maintenance Of A Project That Could Be Potentially Covered With Paint Or Other Coatings Giving An Easy Option To Clear The Slot To Unfasten.
Made Of Grade 360 Brass, Known For Its Strength And Resistance To Corrosion With Properties Closely Resembling That Of Steel And Offering The Highest Machinability Of All Copper Alloys..
Fastenere Brass Fasteners Are Cleaned And Applied With A Sealer That Brings Out The Bright Yellow Brass Finish And Helps To Maintain It..
Round Heads Feature A Round Top Very Similar To Half Of A Sphere With A Flat Load Bearing Surface On The Underside That Will Hold Materials Being Fastened Firmly Together..
Features
- Wood screws have deep coarse threads and are specifically designed for use in wood projects. The shank of the wood screw allows the screw to spin freely inside of the outermost piece of wood and draw the inner piece tight against it by having the threaded end grip the wood and pull.
- Round heads feature a round top very similar to half of a sphere with a flat load bearing surface on the underside that will hold materials being fastened firmly together.
- The slot screw drive has a single slot in the fastener head and is driven by a flat-bladed screwdriver or common blade object. This drive is the best choice for the future maintenance of a project that could be potentially covered with paint or other coatings giving an easy option to clear the slot to unfasten
- Fastenere brass fasteners are cleaned and applied with a sealer that brings out the bright yellow brass finish and helps to maintain it.
- Made of Grade 360 Brass, known for its strength and resistance to corrosion with properties closely resembling that of steel and offering the highest machinability of all copper alloys.
- See more on Amazon...
Brand: Fastenere | Manufacturer: Fastenere
See On Amazon