Fiberglass Supply Depot Inc. - Buying Guide
Last Updated: 05/07/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
Asin: B08RP8DNDB | Model: Poly2lbgk | PartNumber: Poly2lbgk | Ean: 0819794022859 | UPC: 819794022859
2# Density Polyurethane Flotation Foam 1 Gallon Kit; Consists Of 1/2 Gallon Of Part A And 1/2 Gallon Of Part B And Produces 5 Cubic Feet..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
This Expandable Foam Is Recommended For Void Filling In Nonstructural Applications. It Can Be Poured Underneath Decks And Inside Cavities Where A Lightweight Flotation Foam Is Needed To Provide Buoyancy..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.
- 2# Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #2
Fiberglass Chopped Strand Mat 1.5 Oz. - 3 Yards X 50" Wide (37.5sq/ft) for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins
Asin: B099NZWMJ5 | Ean: 0819794020008 | UPC: 819794020008
Uniform Strength And Stiffness In All Directions.
Use About 3 Quarts Of Resin To Wet Out.
Conforms To Mold Details Without Getting Air.
Use As A Bond Layer Between Biaxle And Woven.
Features
- Use for "print through" barrier between gelcoat and woven
- Use as a bond layer between biaxle and woven
- Uniform Strength and stiffness in all directions
- Conforms to mold details without getting air
- Use about 3 quarts of resin to wet out
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #3
Mek Peroxide Catalyst 4oz Clear
Asin: B08PMVK4DR | Ean: 0819794022743 | UPC: 819794022743
Comes In Clear Easy To Use Bottle.
Creates Chemical Reaction With Resin For Curing.
Mek P Catalyst Chart And Measuring Cup Is Included.
4Oz Bottle Is Enough For Approximately 4 Gallons Of Resin. Cannot Be Used By Itself Must Be Used With Resins.
Features
- Mek Peroxide is used as a activator for Gelcoat, polyester, and vinylester resins.
- 4oz bottle is enough for approximately 4 gallons of resin. Cannot be used by itself must be used with resins
- Comes in clear easy to use bottle
- Mek P catalyst chart and measuring cup is included
- Creates chemical reaction with resin for curing
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 0.25 pounds
See On Amazon #4
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Asin: B08R7TX8QJ | Model: poly2lbqk | PartNumber: poly2lbqk | Ean: 0819794022873 | UPC: 819794022873
2# Density Polyurethane Flotation Foam Quart Kit; Consists Of 1 Pint Of Part A And 1 Pint Of Part B And Produces 1.25 Cubic Feet..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
This Expandable Foam Is Recommended For Void Filling In Nonstructural Applications. It Can Be Poured Underneath Decks And Inside Cavities Where A Lightweight Flotation Foam Is Needed To Provide Buoyancy..
Features
- Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.
- 2# Density polyurethane flotation Foam Quart Kit; Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 2.00 pounds
See On Amazon #5
6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
Asin: B0BBH4XQ9P
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 6Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
6Lb. Density Polyurethane Flotation Foam 1 Gallon Kit; Consists Of 1/2 Gallon Of Part A And 1/2 Gallon Of Part B And Produces 1.5 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 6LB. Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 1.5 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 6.00 pounds
See On Amazon #6
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Asin: B08T255GS5 | Ean: 0819794022897 | UPC: 819794022897
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
4Lb. Density Polyurethane Flotation Foam Quart Kit; Consists Of 1 Pint Of Part A And 1 Pint Of Part B And Produces 1/2 Cubic Foot..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam Quart Kit; Consists of 1 pint of Part A and 1 pint of Part B and produces 1/2 cubic foot.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #7
Gel Coat Dump Gun Cups 25pc -1Qt Paper Cups
Asin: B08PDLLF7K | Ean: 0819794022712 | UPC: 819794022712
32Oz Un-Treated (Non Waxed) Paper Cup.
Also Works Good For Mixing Resin, Gelcoat, And Epoxy.
Fits Es100a, G100-6, And G200-6 Dump Guns.
Features
- Comes in a sleeve of 25 paper cups
- Fits ES100A, G100-6, and G200-6 dump guns
- 32oz Un-Treated (Non Waxed) paper cup
- Also works good for mixing resin, gelcoat, and epoxy
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc.
See On Amazon #8
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)
Asin: B08T2195F8 | Ean: 0819794022934 | UPC: 819794022934
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
4Lb. Density Polyurethane Flotation Foam 1 Gallon Kit; Consists Of 1/2 Gallon Of Part A And 1/2 Gallon Of Part B And Produces 2 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
Dimensions: 6.00 x 10.00 x 9.00 inches
See On Amazon #9
Fiberglass Supply Depot Inc. Styrene Monomer Thinner for Gelcoat and Polyester Resin Pint
Asin: B0B98NLWHN
Comes In Easy To Pour Container.
Packaged In A Pint Can.
We Recommend Adding Styrene At No More Than 5% In Order To Maintain The Physical Properties Of The Resin Or Gel Coat..
Features
- Reducer for resins, and gelcoats.
- We recommend adding styrene at no more than 5% in order to maintain the physical properties of the resin or gel coat.
- Comes in easy to pour container
- Packaged in a Pint can
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #10
2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)
Asin: B08LW1ZNK8 | Model: poly2lb2gk | PartNumber: poly2lb2gk | Ean: 0819794022675 | UPC: 819794022675
2# Density Polyurethane Flotation Foam 2 Gallon Kit; Consists Of 1 Gallon Of Part A And 1 Gallon Of Part B And Produces 10 Cubic Feet..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
This Expandable Foam Is Recommended For Void Filling In Nonstructural Applications. It Can Be Poured Underneath Decks And Inside Cavities Where A Lightweight Flotation Foam Is Needed To Provide Buoyancy..
Features
- Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.
- 2# Density polyurethane flotation Foam 2 Gallon Kit; Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 2.00 pounds
See On Amazon #11
Epoxy Hand Pump Dispenser Fits Most 1 Gallon Jugs and Containers. (Pack of 2)
Asin: B08QQBB41G | Ean: 0819794022804 | UPC: 819794022804
Fits Most Plastic Or Glass Gallon Containers With 38/400 Thread (Container Not Included).
Comes In A Pack Of Two Pumps..
Works Excellent For Dispensing Epoxy Resins And Hardeners..
Precision Pump Dispenses 30Cc's 1 Fl. Oz. Of Product Per Full Stroke With 2 Siphon Stops To Prevent Leaks.
Features
- Convenient, durable, sturdy, and highest quality pump screws securely onto most gallon container's
- Precision pump dispenses 30CC's 1 fl. oz. of product per full stroke with 2 siphon stops to prevent leaks
- Fits most plastic or glass gallon containers with 38/400 thread (container not included)
- Works excellent for dispensing epoxy resins and hardeners.
- Comes in a pack of two pumps.
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #12
4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)
Asin: B08V5BV9V9 | Ean: 0819794022927 | UPC: 819794022927
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 4Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications..
4Lb. Density Polyurethane Flotation Foam 2 Gallon Kit; Consists Of 1 Gallon Of Part A And 1 Gallon Of Part B And Produces 4 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 4LB. Density polyurethane flotation Foam 2 Gallon Kit; Consists of 1 gallon of Part A and 1 gallon of Part B and produces 4 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #13
Fiberglass Supply Depot Inc. Styrene Monomer Thinner for gelcoat and Resin - Quart
Asin: B08PW54HHQ | Ean: 0819794022750 | UPC: 819794022750
Comes In Easy To Pour Container.
Packaged In A Quart Can.
We Recommend Adding Styrene At No More Than 5% In Order To Maintain The Physical Properties Of The Resin Or Gel Coat..
Features
- Reducer for resins, and gelcoats.
- We recommend adding styrene at no more than 5% in order to maintain the physical properties of the resin or gel coat.
- Comes in easy to pour container
- Packaged in a Quart can
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #14
Cabosil Fumed Silica (4oz Jar) - Resin Thickener for Non-Saggy Putty - Advanced Epoxy Resin Thickener - Professional Thixotropic Agent for Smooth Epoxy
Asin: B0CM6X5Y3H | Model: FSDFIL014OZ | PartNumber: FSDFIL014OZ
Designed For Resin: This Fumed Silica Is Formulated To Provide Sag Resistance, As Well As Anti-Settling And Anti-Corrosive Performance. Our Colloidal Silica Ensures High Shelf Stability And Mechanical Reinforcement In Epoxy Coatings..
Technical Features: This Cabosil Filler May Be Synthesized By High Temperature Hydrolysis Of Sicl4 In O2(N2)/H2 Flame. The Formula Is Amorphous And It Possesses A Very High Specific Area. The Microdroplets Of Amorphous Silica Fuse Into A Branch And Form A Chain-Like Agglomerate, Which Helps To Thicken The Resin Mixture..
Small Size: Our Fumed Silica Comes In A 4Oz Package And Can Be Mixed With Other Fillers To Create Custom Blends. Cabosil Can Be Added To Any Type Of Resin Mix And Simply Stirred By Hand..
Easy To Use: This Epoxy Thickener Is Designed To Be Used Alone For A Smooth And Non-Sagging High-Strength Mixture. Additionally, It Can Also Be Combined With Fillers Or Fibers To Prevent Them From Sagging..
Features
- Optimal Solution: Fiberglass Supply Depot Inc. s colloidal silica is a must-have product for those of you who want to work with smooth, non-saggy epoxy resin. This product acts as a premium thixotropic agent that allows you to control the viscosity of mixed epoxy systems.
- Easy to Use: This epoxy thickener is designed to be used alone for a smooth and non-sagging high-strength mixture. Additionally, it can also be combined with fillers or fibers to prevent them from sagging.
- Designed for Resin: This fumed silica is formulated to provide sag resistance, as well as anti-settling and anti-corrosive performance. Our colloidal silica ensures high shelf stability and mechanical reinforcement in epoxy coatings.
- Small Size: Our fumed silica comes in a 4oz package and can be mixed with other fillers to create custom blends. Cabosil can be added to any type of resin mix and simply stirred by hand.
- Technical Features: This Cabosil filler may be synthesized by high temperature hydrolysis of SiCl4 in O2(N2)/H2 flame. The formula is amorphous and it possesses a very high specific area. The microdroplets of amorphous silica fuse into a branch and form a chain-like agglomerate, which helps to thicken the resin mixture.
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #15
Partall Film #10 - PVA Polyvinyl Alcohol Pint
Asin: B078XH3NYR | Model: FBAPVAP | PartNumber: FBAPVAP | Ean: 0819794021159 | UPC: 819794021159
Rinses Off With Water..
Creates A Thin Film On Part.
Green Pva.
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Rexco
See On Amazon #16
6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (Quart Kit)
Asin: B0BLKLDH79
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 6Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
6Lb. Density Polyurethane Flotation Foam 1 Quart Kit; Consists Of 1 Pint Of Part A And 1 Pint Of Part B And Produces 0.375 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 6LB. Density polyurethane flotation Foam 1 Quart Kit; Consists of 1 Pint of Part A and 1 Pint of Part B and produces 0.375 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #17
Fiberglass Woven Roving 18 Oz, Plain Weave Cloth 50" Wide x 3yds for Boat & Pool Repair (37.5 sq ft)
Asin: B09B4DVNMT | Model: fgwr18x503 | PartNumber: fgwr18x503 | Ean: 0819794020015 | UPC: 819794020015
Woven Roving Works Well When Used With Chopped Strand Mat To Fabricate Large Size Objects, Such As Boat, Vehicle Components, Pressure Tank, House, Etc..
8 Oz. Per Square Yard Material Wets Out Easily And Is Usually Used Between Layers Of Mat For Strong Laminates.
Because Of Higher Fiber Content, Woven Roving's Lamination Has Excellent Tensile Strength And Impact-Resistant Property..
Features
- Woven Roving cloth is a collection of specific numbers of untwisted continuous filaments.
- Because of higher fiber content, woven roving's lamination has excellent tensile strength and impact-resistant property.
- Woven Roving works well when used with chopped strand mat to fabricate large size objects, such as boat, vehicle components, pressure tank, house, etc.
- 8 oz. per square yard material wets out easily and is usually used between layers of mat for strong laminates
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #18
Fiberglass Chopped Strand Mat 2oz 3 Yards | 50 inches Wide x 9 Feet Long | 3 Yards Folded | Hand Layup, Vacuum Bagging, Polyester or Vinyl Ester Resins
Asin: B0CCWWPYFX | Model: FBA2X503 | PartNumber: FBA2X503
It Can Be Used With Epoxy, Polyester, Surfboard Or Vinyl Ester Resins..
Listing Is For 3 Yards Folded..
This Chopped Strand Mat Has Excellent Wet Out Characteristics..
The Mat Is Made Of High-Quality E-Glass Strands..
Features
- This 2oz Fiberglass Chopped Strand Mat is marine grade and suitable for boat building and repairs, roofing, custom speaker boxes, pond lining and many other applications.
- The mat is made of high-quality E-glass strands.
- It can be used with epoxy, polyester, surfboard or vinyl ester resins.
- This chopped strand mat has excellent wet out characteristics.
- Listing is for 3 yards folded.
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #19
Mek Peroxide Catalyst 60cc Clear
Asin: B08PL1JBFP | Ean: 0819794022736 | UPC: 819794022736
Comes In Clear Easy To Use Bottle.
Creates Chemical Reaction With Resin For Curing.
Mek P Catalyst Chart And Measuring Cup Is Included.
60Cc Bottle Is Enough For Approximately A Gallon Of Resin. Cannot Be Used By Itself Must Be Used With Resins.
Features
- Mek Peroxide is used as a activator for Gelcoat, polyester, and vinylester resins.
- 60cc bottle is enough for approximately a gallon of resin. Cannot be used by itself must be used with resins
- Comes in clear easy to use bottle
- Mek P catalyst chart and measuring cup is included
- Creates chemical reaction with resin for curing
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #20
Fiberglass Supply Depot - Cabosil Fumed Silica - Resin Thickener for Non-Saggy Putty - Advanced Epoxy Resin Thickener - Professional Thixotropic Agent for Smooth Epoxy - Easy to Use (1 Quart)
Asin: B09NMKXDPY | Ean: 0819794023092 | UPC: 819794023092
Designed For Resin: This Fumed Silica Is Formulated To Provide Sag Resistance, As Well As Anti-Settling And Anti-Corrosive Performance. Our Colloidal Silica Ensures High Shelf Stability And Mechanical Reinforcement In Epoxy Coatings..
Technical Features: This Cabosil Filler May Be Synthesized By High Temperature Hydrolysis Of Sicl4 In O2(N2)/H2 Flame. The Formula Is Amorphous And It Possesses A Very High Specific Area. The Microdroplets Of Amorphous Silica Fuse Into A Branch And Form A Chain-Like Agglomerate, Which Helps To Thicken The Resin Mixture..
Large Size: Our Fumed Silica Comes In A 1-Quart Package And Can Be Mixed With Other Fillers To Create Custom Blends. Cabosil Can Be Added To Any Type Of Resin Mix And Simply Stirred By Hand..
Easy To Use: This Epoxy Thickener Is Designed To Be Used Alone For A Smooth And Non-Sagging High-Strength Mixture. Additionally, It Can Also Be Combined With Fillers Or Fibers To Prevent Them From Sagging..
Features
- Optimal Solution: Fiberglass Supply Depot Inc. s colloidal silica is a must-have product for those of you who want to work with smooth, non-saggy epoxy resin. This product acts as a premium thixotropic agent that allows you to control the viscosity of mixed epoxy systems.
- Easy to Use: This epoxy thickener is designed to be used alone for a smooth and non-sagging high-strength mixture. Additionally, it can also be combined with fillers or fibers to prevent them from sagging.
- Designed for Resin: This fumed silica is formulated to provide sag resistance, as well as anti-settling and anti-corrosive performance. Our colloidal silica ensures high shelf stability and mechanical reinforcement in epoxy coatings.
- Large Size: Our fumed silica comes in a 1-quart package and can be mixed with other fillers to create custom blends. Cabosil can be added to any type of resin mix and simply stirred by hand.
- Technical Features: This Cabosil filler may be synthesized by high temperature hydrolysis of SiCl4 in O2(N2)/H2 flame. The formula is amorphous and it possesses a very high specific area. The microdroplets of amorphous silica fuse into a branch and form a chain-like agglomerate, which helps to thicken the resin mixture.
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #21
White Glass Microspheres - Filler for Epoxy and Polyester Resin; 4 oz Jar
Asin: B0CRFB1Q7P
Microspheres Improves The Weight To Strength Ratio Improves Dimensional Stability.
Engineered Hollow Glass Microspheres.
When Added With Our Cabosil (Equal Parts By Volume) It Makes A Great General Purpose Putty.
Also Called Glass Bubbles - Easy To Pour And Store Gallon Jug.
Features
- Sands Easy Added to epoxy or polyester to make a lightweight fairing compound
- Also Called Glass Bubbles - Easy to Pour and Store Gallon Jug
- Microspheres Improves the Weight to Strength Ratio Improves Dimensional Stability
- When added with our cabosil (equal parts by volume) it makes a great general purpose putty
- Engineered hollow glass microspheres
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #22
Fiberglass Chopped Strand Mat 1.5 oz | 50 inches Wide x 54 Feet Long | 18 Yards Rolled | Hand Layup, Vacuum Bagging, Polyester or Vinyl Ester Resins
Asin: B07CX87JX4 | Ean: 0819794021241 | UPC: 819794021241
1.5Oz Mat - 50" Wide By 54 Feet Long..
Conforms Easier Then Woven Or Biaxial..
Uniform Strength And Stiffness In All Directions..
Can Be Used Alone Or With Other Fibreglass Fabrics..
Features
- Use for "Print Through" barrier between gel coat and woven roving or biaxial.
- Can be used alone or with other fibreglass fabrics.
- 1.5oz Mat - 50 wide by 54 Feet long.
- Uniform strength and stiffness in all directions.
- Conforms easier then Woven or Biaxial.
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
Weight: 0.09 pounds
See On Amazon #23
6 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boats, Dock Flotation, Carving, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)
Asin: B0CYF9MLBP | Model: POLY6LB2GK | PartNumber: POLY6LB2GK
Once Fully Cured This Foam Can Be Laminated Over With Any Type Of Polyester, Epoxy Or Vinyl Ester Resin Without Melting..
All Expansion Rates And Times Given Are Temperature Critical. Temperatures Below 75° F Will Lower The Expansion Rate Therefore Requiring More Foam. Ideal Working Temperature Is 75° To 80° F Or Above. Accurate Measuring Of These Products Is Extremely Critical. Working Time Before Foaming: Approx. 45 Seconds Time Before Full Expansion: Approx. 5 Minutes.
The 6Lb Density Also Works Well In Floating Decoy Or Taxidermy Applications As Well As Many Other Sculpting, Casting, Carving And Other Filling Applications.
6Lb. Density Polyurethane Flotation Foam 2 Gallon Kit; Consists Of 1 Gallon Of Part A And 1 Gallon Of Part B And Produces Approximately 2.5 Cubic Feet..
Features
- Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.
- 6LB. Density polyurethane flotation Foam 2 Gallon Kit; Consists of 1 gallon of Part A and 1 gallon of Part B and produces approximately 2.5 cubic feet.
- Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
- The 6LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications
- All expansion rates and times given are temperature critical. Temperatures below 75 F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes
- See more on Amazon...
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #24
1/4" Chopped Carbon Fiber Strands - 4 oz Jar
Asin: B0CNBNSH5D | Ean: 0819794023436 | UPC: 819794023436
Chopped Carbon Exhibits High Strength And Modulus, Excellent Fatigue, Low Thermal Expansion And Electrical And Thermal Conductivity..
Applications Automotive Aerospace Chemical Industry Construction Military Sporting Goods Forged Parts.
Recommended Use: Thermoset Resins: Epoxy, Vinyl Ester, Unsaturated Polyester, And Phenolic.
Use With Difficult Vacuum Bagging Applications To Fill Deep Voids Or Sharp Edges..
Features
- A thin, short, rectangular fiber cut from unidirectional carbon fiber commonly combined with resin to add strength and stiffness to parts.
- Use with difficult vacuum bagging applications to fill deep voids or sharp edges.
- Chopped Carbon exhibits high strength and modulus, excellent fatigue, low thermal expansion and electrical and thermal conductivity.
- RECOMMENDED USE: Thermoset resins: Epoxy, Vinyl Ester, Unsaturated Polyester, and Phenolic
- APPLICATIONS Automotive Aerospace Chemical Industry Construction Military Sporting Goods Forged Parts
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #25
Fiberglass Cloth 6 Ounce by 60 Inches Wide - 20 Yards Rolled- 300 sq/ft for Boat and Pool Repair
Asin: B08W5GC9NH | Ean: 0819794023009 | UPC: 819794023009
Compatible With Epoxy, Polyester And Vinylester Resin.
This 6 Oz. Cloth Is The Standard “E” Glass Volan-Finished Boat Cloth Style 3733.
Often Used On Surfboards, Sailboats And Cedar Strip Canoes.
Provides Uniform Strength Horizontally And Vertically This Six Ounce Cloth Is 3.9 Mils Thick.
Features
- This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing.
- Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick
- Compatible with Epoxy, Polyester and Vinylester Resin
- Often Used on Surfboards, Sailboats and Cedar Strip Canoes
- This 6 oz. cloth is the standard E glass volan-finished boat cloth Style 3733
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #26
Wood Flour
Asin: B0CR1RDDB1
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #27
Divinycell PVC Foam Core H-80 5lb Density 1/2 (24 x48 )
Asin: B0CLPHQKQF
Provides Excellent Mechanical Properties To A Low Weight, Good Temperature Resistance.
Divinycell H Is Ideal For Applications Subject To Fatigue, Slamming Or Impact Loads..
Sold As A 24"X48" Sheet.
Excellent Fatigue Properties, Low Resin Uptake.
Features
- Low water absorption, Superior damage tolerance, Superior damage tolerance
- Excellent fatigue properties, Low resin uptake
- Provides excellent mechanical properties to a low weight, Good temperature resistance
- Sold as a 24x48 Sheet
- Divinycell H is ideal for applications subject to fatigue, slamming or impact loads.
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Diabgroup
See On Amazon #28
Fiberglass Cloth 4oz - 50" x 108" (3 Yards Folded) 37.5 Sq.Ft. for Surfboard and Boat Repair
Asin: B08VX1WHYN | Model: FGC4X503 | PartNumber: FGC4X503 | Ean: 0819794022903 | UPC: 819794022903
Compatible With Epoxy, Polyester And Vinylester Resin.
This 4 Oz. Cloth Is The Standard “E” Glass Volan-Finished Cloth Style 1522.
Often Used On Surfboards, Sailboats And Cedar Strip Canoes.
Provides Uniform Strength Horizontally And Vertically This 4 Ounce Cloth Is 0.0059” Thick.
Features
- This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing.
- Provides Uniform Strength Horizontally and Vertically This 4 ounce cloth is 0.0059 thick
- Compatible with Epoxy, Polyester and Vinylester Resin
- Often Used on Surfboards, Sailboats and Cedar Strip Canoes
- This 4 oz. cloth is the standard E glass volan-finished cloth Style 1522
- See more on Amazon...
Brand: Fiberglass Supply Depot Inc. | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon #29
1708 Fiberglass 45/45 DBM Biaxial 50" Inch Wide - 60 FEET Long - 20 Yards
Asin: B09RQY2RN9 | Ean: 0819794021388 | UPC: 819794021388
Brand: Fiberglass Supply Depot | Manufacturer: Fiberglass Supply Depot Inc.
See On Amazon