FrSky - Buying Guide

Bestselling from FrSky on Amazon

1. FrSky Taranis Receiver X8R 8 Channel 2.4ghz ACCST&RSSI&SBUS
2. FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone
3. FrSky Compact XSR-SIM USB Dongle for FrSky Transmitters and Module System
4. FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM
5. FrSky Archer Plus SR10+ Receiver
6. FrSky Taranis X9D Plus Transmitter Parts 2 Position Long Toggle Switch by FrSky
7. FrSky STK Tool for S.Port Products Upgrading and S6R/S8R receivers Configuration
8. FrSky Access 900MHz Long Range R9 MM-OTA Receiver
9. FrSky Archer Plus R6 Receiver
10. FrSky Archer Plus RS Receiver

Features

• With RSSI PWM output (0~3.3V)
• Parallel two X8R to become a 16 channel receiver.
• SmartPort enabled, realizing two-way full duplex transmission.
• More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver.
• All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.
• See more on Amazon...

Features

• Notes Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight
• Supports redundancy function Support telemetry and Smart Port enabled
• IPEX connector, replaceable antennas
• Switchable SBUS/ CPPM signal output
• US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. Providing outstanding customer service is our number one priority.
• See more on Amazon...

Features

• Low power requirements: typically 55mA
• Compatible with FrSky transmitters and module systems (Mode D16)
• Compatible with popular simulators (DRL, LiftOff, Freerider, HotProps, etc.)
• 8 proportional channel and 8 switch channel output (set on the transmitter side)
• Firmware upgradable (through the S.Port) No additional drivers or additional software required for PC
• See more on Amazon...

Features

• Notes Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver.This insanely tiny 2.4GHz diversity receiver available from FrSky is the next big thing in miniaturization of racing craft.Perfect for those racers who are looking to lower their AUW.
• XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time
• Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E X12S transmitter.
• weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone .
• FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.If you have any problem, feel free to contact us with detailed information and bar code. Our technology support team will help check and solve the problem. In addition, we also have US support center. If you want, you can also call them or return it back to them and they can fix it for you.
• See more on Amazon...

Features

• The Archer Plus SR10+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.
• The SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
• With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
• Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function (Available later by updating the FW.) Built-in 3-axis gyroscope and 3-axis accelerometer sensor Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Anti-interference capability in the spark-ignition process
• Over-The-Air (OTA) FW update External battery/device voltage detection Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• See more on Amazon...

Features

• FrSky Taranis X9D Plus Transmitter Parts 2 Position Long Toggle Switch
• See more on Amazon...

Features

• New Arrival
• S.Port 1 (upper) Monitor, receive and set the telemetry data for S6R/S8R receivers (with DIP switch to the upper side)
• S.Port 2 (down) - Upgrade S.Port products (with DIP switch to the down side)
• See more on Amazon...

Features

• Mini size and super lightweight
• Supports OTA firmware update
• Supports firmware version check
• Low latency and high precision
• S.Port enabled and support telemetry data transmission (Support F.Port, download firmware to support the function)
• See more on Amazon...

Features

• The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
• The Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
• Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function 6 high-precision PWM channel ports SBUS Out port Supports 16 24CH mode Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
• Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 5 -10V Operating Current: 65mA@5V Operating Range: 2km (Full range)(*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• See more on Amazon...

Features

• Tiny and super lightweight S.Port / F.Port / FBUS (Configurable via S.Port)
• Over-The-Air (OTA) FW update SBUS Out port (Supports 16CH / 24CH mode) SBUS In port (Supports Signal Redundancy) Inverted S.Port
• Antenna Connector: IPEX4 Control Range: Full range* with telemetry (* Full Range: 2km, the control range may vary based on local conditions.) Compatibility: All FrSky ACCESS/ACCST D16 transmitters.
• See more on Amazon...

Features

• Frsky Taranis X9D Plus Transmitter Parts One Position Long Toggle Switch
• See more on Amazon...

Features

• Ergonomic and compact design Haptic vibration alerts and voice speech outputs
• Open source operating system Installed with ACCESS protocol
• High-speed module digital interface
• Supports spectrum analyzer function wired training function
• Easily accessible battery compartment (*Batteries not included, adaptive with replaceable 18650 Li-ion batteries)
• See more on Amazon...

Features

• The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
• The Archer Plus SR8 are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The Archer Plus SR8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port.
• With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. (*Some features require the support of ACCESS and ETHOS.)
• Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function Built-in 3-axis gyroscope and 3-axis accelerometer sensor Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.)
• SBUS Out port (Supports 16CH / 24CH mode) SBUS In port (Supports Signal Redundancy) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
• Number of Channels: 8/24 channels -8 High-precision PWM & 16 SBUS channels Mode -8 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 3.5 -10V Operating Current: 65mA@5V
• Operating Range: 2km (Full range) (*Range may vary based on local conditions.) Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• See more on Amazon...

Features

• The R10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The R10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port.
• With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. This receiver also supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range.
• Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function (Available later by updating the FW.) 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) Supports signal redundancy (SBUS In)
• Full control range with telemetry (S.Port or FBUS) Anti-interference capability in the spark-ignition process Over-The-Air (OTA) FW update External battery/device voltage detection
• 10 Configurable Channel Ports CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In CP2-10: PWM / SBUS Out / FBUS / S.Port SBUS Out (Supports 16CH / 24CH mode)
• Control Range: Full range* with telemetry (*Full Range: 2km, the range may vary based on local conditions.)Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• See more on Amazon...

Features

• X9 Lite is ACCESS protocol. The receivers should be upgraded to ACCESS protocol to work properly.
• Compatibility: ACCST D16 and ACCESS receivers
• Supports wired training function G7 Noble potentiometer gimbal
• Supports spectrum analyzer function Haptic vibration alerts and voice speech outputs
• High-speed module digital interface Easily accessible battery compartment (*Batteries not included, adaptive with replaceable 18650 button top Li-ion batteries)
• See more on Amazon...

Features

• Hall sensor
• 4 ball-bearings
• smooth, easy to install and adjust
• Can be enable or disable self centering on both axis and ratcheting on the Y axis
• Special material quality that wears well
• See more on Amazon...

Features

• Simultaneous Working Dual-Band (900M/2.4G) TD Mode Dual Power Balancing Consumption Basic Black-Box Data Record Function Built-in Power Switch Function | Match with Different External Switches (Optional)
• 4ms Race Mode with Telemetry Long Control Range (Range varies based on the RF Power settings.) 12 Configurable Channel Ports CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In (Redundancy Func.) CP2-12: PWM / SBUS Out / FBUS / S.Port
• FBUS / S.Port SBUS Out Port (Supports 16CH / 24CH mode) SBUS In Port (Supports Signal Redundancy) Over-The-Air (OTA) FW Update
• Frequency: 900MHz & 2.4GHz Dimension: 48.5*33*17.9mm (L*W*H) Weight: 23g Operating Voltage: 3.5-10V (Recommend 2S Li Batteries) Operating Current: 170mA
• Continuous Current: 20A (power the device) | Instaneous Current: 40A (power the device) Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Compatibility: Tandem series radio & TD protocol capable RF module Dual XT30 Power Input Connector Triple Antenna Design (2 2.4G & 1 900M antennas)
• See more on Amazon...

Features

• X9 Lite is ACCESS protocol. The receivers should be upgraded to ACCESS protocol to work properly.
• Compatibility: ACCST D16 and ACCESS receivers
• Supports wired training function G7 Noble potentiometer gimbal
• Supports spectrum analyzer function Haptic vibration alerts and voice speech outputs
• High-speed module digital interface Easily accessible battery compartment (*Batteries not included, adaptive with replaceable 18650 button top Li-ion batteries)
• See more on Amazon...

Features

• Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4G ACCESSMode (Compatible with ACCESS Receivers) 900M ACCESSMode (Compatible with ACCESS R9 868/915MHz Receivers) (*Capable of simultaneous working under ACCESS mode) 2.4G & 900M TD Mode (Compatible with TD Receivers)
• Super-low latency and long-range control with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency) 800*480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs
• Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System (Compatible with FreeLink App3.0) Built-in Audio Wireless Module (Compatible with Bluetooth Audio Device)
• All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45 to 60 stcik travel and 8 rotatable panel. ETHOS: The more powerful, Flexible and Intuitive OS for your radio. Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display (Touch and Non-Touch) Supports Multi-Language Switching Hardware/Software Version and Factory Version Detection Supports running LUA Scripts
• Internal 900MHz/2.4GHz Dual-Band & External Module Bay The TD dual-band RF system combines both the features and advantages of FrSky 900MHz and 2.4GHz RF together in one system. The TD features real simultaneous dual-band long-range control with telemetry that achieves reliable end-to-end 4ms latency while maintaining a robust and high-quality signal link. The entire range of TD, ACCESS & ACCST D16 receivers are supported. The built-in TANDEM RF System supports ACCESS and ACCST D16
• See more on Amazon...

Features

• The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
• The Archer Plus GR6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 /GR6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port.
• With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. The Archer Plus GR6 are receivers with an upgraded high-precision variometer that gives pilots more accurate and quicker altitude and vertical speed data and also features its more accurate and quicker vario audio feedback from your FrSky ACCESS enabled transmitter.
• Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function Upgraded variometer sensor 6 high-precision PWM channel ports SBUS Out port Supports 16 24CH mode Supports signal redundancy (SBUS In)
• Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
• Number of Channels: 6/24 channels 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 3.5-10V Operating Current: 65mA@5V Operating Range: 2km (Full range)(*Range may vary based on local conditions.) Variometer Measurement Range Altimeter Range & Resolution: -700m to 10000m & 0.1m Vertical Speed Range: 10m/s Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• See more on Amazon...

Features

• Tray for Tandem X20 / X20S
• See more on Amazon...

Features

• Classic Taranis form factor design
• Installed with ACCESS protocol
• Easy launch momentary button
• High-speed module digital interface
• Supports spectrum analyzer function
• See more on Amazon...

Features

• 900MHz/868MHz working mode Compatibility: R9 series (ACCST/ACCESS)
• Long range, low latency and high precision RC system Vin Voltage Range: 6.5V~13V
• 4 Optional RF power (Non-LBT Version) Vin Voltage Range: 6.5V~13V
• Telemetry mode 25mW /non-telemetry mode 200mW / 500mW (LBT Version)
• Smart Port enabled and support telemetry data transmission Telemetry Interface: Smart Port Upgrade Interface: Smart Port
• See more on Amazon...

Features

• The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power & Signal related) can be well preserved.
• The Archer Plus GR8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The GR8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
• The Archer Plus GR8 are receivers with an upgraded high-precision variometer that gives pilots more accurate and quicker altitude and vertical speed data and also features its more accurate and quicker vario audio feedback from your FrSky ACCESS enabled transmitter. (*Some features require the support of ACCESS and ETHOS.)
• Enhanced Anti RF-Interference capability with more solid RF performance Smart-matched ACCESS & ACCST D16 modes Supports basic Black-Box function Upgraded variometer sensor 8 high-precision PWM channel ports
• SBUS Out port Supports 16 24CH mode Supports signal redundancy (SBUS In) Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update External battery/device voltage detection
• Number of Channels: 8/24 channels 8 High-precision PWM & 16 SBUS channels Mode 8 High-precision PWM & 24 SBUS channels Mode Operating Voltage Range: 3.5 -10V Operating Current: 65mA@5V Operating Range: 2km (Full range)(*Range may vary based on local conditions.) Variometer Measurement Range Altimeter Range & Resolution: -700m to 10000m & 0.1m Vertical Speed Range: 10m/s Voltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10) Antenna connector: IPEX4 Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters
• See more on Amazon...

Features

• ACCESS protocol with Over The Air (OTA) Anti-interference in spark-ignition
• Supports signal redundancy (SBUS In) Full control range with telemetry
• S.Port / F.Port External battery / device voltage detection
• 8 High-precision PWM Channels Control Range: Full range* with telemetry
• Voltage Measurement Range via AIN2 (External device): 0-36V Compatibility: All FrSky ACCESS transmitters
• See more on Amazon...

Features

• The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.
• The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power & Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.
• The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.
• ADV Stabilizer The TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.
• The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.
• In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc. The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.
• See more on Amazon...

Features

• Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage
• Black Box function 4ms Race Mode with Telemetry Long control range (up to 50KM 100KM)
• Over-The-Air (OTA) FW update 4 PWM channels S.Port & Inverted S.Port FBUS / SBUS Out / SBUS In (Redundancy Func.)
• Frequency: 2.4GHz & 900MHz Compatibility: Tandem series radio & TD protocol capable RF module
• Triple 2.4G/900M Antenna 2* External 2.4G antenna (IPEX1) 1* Newly designed 900M antenna
• See more on Amazon...

Features

• The Archer Plus R8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The R8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.
• See more on Amazon...

Features

• High-speed digital module interface
• Telemetry data transmission supported
• This being the Lite version works perfectly with all FrSky receivers in the ACCST D16, D8 and LR12 mode.
• Channel: up to 16CH
• Dimension: 62.4mm 30mm 14.5mm (L W H)
• See more on Amazon...