Fulton Woodworking Tools - Buying Guide

Bestselling from Fulton Woodworking Tools on Amazon

1. Fulton 4 inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clam...
2. Fulton Woodworking Tools X-Stream Drill Press Dust Collector with Multi-Axis Adjustability Univers...
3. Fulton Woodworking Tools 4" x 20' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collectio...
4. Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock ...
5. Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your For...
6. Fulton Woodworking Tools 4" x 50' Ultra Flex Clear Vue Heavy Duty PVC Dust Collection Hose
7. 5" x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume...
8. Fulton 2 1/2 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear ...
9. Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Miter Bars 2 Aluminum Tracks 1 Knob and 1 Bolt al...
10. 6" x 10' (6 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume...

Features

• NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
• LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
• OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
• 304 STAINLESS STEEL HOSE CLAMP- The hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
• FLEXIBLE ADJUSTABLE SIZE RANGE- Each hose clamp is flexible and workable with a rather wide adjustable size range from appx. 4-7/16 in full diameter down to appx. 3-7/16 at its most compact diameter for the 4 hose clamps, while the 5 to 6 hose clamps range from 4-1/2 to 6-1/2 in diameter.
• See more on Amazon...

Features

• This is the most advanced drill press dust collector yet! Keep your drill press work area clear of dust and debris by quickly and easily positioning the X-Stream Drill Press Dust Collector exactly where you need it! The X-Stream Drill Press Dust Collector provides you with an un-obstructed view of your drill point so you never lose site of where you are drilling.
• With Multi-Axis adjustability, you ll have no problem collecting the dust right from the source. Simply adjust the X-Stream Drill Press Dust Collector to your exact position and you re ready to keep your dust and debris under control!
• From bench top models to floor models, this system is compatible with any size drill press. The included extra long tube can be cut to size to perfectly fit your drill press.
• With two different nozzles (tapered and mini dust hood) you ll not only be able to pin point your dust collection you ll also be able to sand on your drill press without kicking up so much dust. It s truly a game changer!
• The X-Stream Drill Press Dust Collector can be used with most any material on your drill press. Use this system to collect dust and debris from wood, metal, composites and more. Patent Pending.
• See more on Amazon...

Features

• The PVC hose is wrapped around a steel wire that can easily be grounded.
• Tight bending radius allows you to maneuver the hose anywhere in your shop.
• This heavy duty hose will not collapse under pressure from your dust collector.
• Hose is clear so you can see directly inside to spot any kind of obstruction.
• See more on Amazon...

Features

• The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
• The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
• The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
• Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
• Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
• See more on Amazon...

Features

• Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
• The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
• One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
• The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
• The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
• 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
• LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
• FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
• FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
• See more on Amazon...

Features

• If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
• Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
• UHMW bars are most commonly used as runners for crosscut sleds since they don t produce as much friction as wood does. Another advantage is that UHMW won t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4 x 3/8 which fits most standard table saw slots. UHMW bars are also slick and won t leave any residue, dust or shavings behind like wooden bars tend to do.
• The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
• We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19 long by 3/4 by 3/8 UHMW bars, 2 each 12 long mini tracks, 1 each knob, 1 each 1/4 by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!
• One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don t want or need a large dust collection system in our garage or workshop. With this fitting, you ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums.
• This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more.
• Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
• Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64 OD and 3-41/64 ID; 2-1/2 nominal OD end measures 2-15/32 OD and 2-9/32 ID. All of the dimensions may slightly vary due to slight variations in the manufacturing process.
• See more on Amazon...

Features

• When creating or adding to our dust collection system, there are a great many details we need to keep in mind. Typically, we will have one dust collector connected to multiple machines around the shop. While this kind of works, it can work much better if you could turn off the airflow to all the machines except for the one being used at the moment. That s where blastgates step in. Simply open or close the blastgate to allow or block airflow to a specific machine
• Ideally, the way blastgates should work, is that you should have a blastgate setup for every machine in your workshop. When you close all the blastgates to all the other machines, you increase the airflow or suction to the machine being used. This means that you should see less dust on the machine that is being used since it is getting maximum airflow or suction. This also helps reduce the amount of wear and tear on your dust collector.
• This blastgate features tapered ports on both sides of the blastgate. The tapered ports allow hoses (sold separately) to be slipped on and clamped with hose clamps (sold separately) with ease. Tapered ports will also accept some tapered fittings.
• The sliding gate has a built-in stop so it will not slide out when fully opened. The gate acts like a shut off valve to keep air from flowing in a given direction when it is closed. When opened, air will pass through allowing dust to be collected as needed.
• The Fulton blastgate is made from a durable ABS plastic material for everyday workshop use. With an easy to open and close sliding gate you ll be able to quickly open and close hose lines to concentrate airflow to where you need, when you need it and for maximum airflow.
• See more on Amazon...

Features

• Finally! A set of contours, angles and pads that work for inside, outside, flat, curved, small and tight areas all in one convenient package! The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house.
• These 11 grips with 21 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9 x 11 sanding sheets or pre-cut sandpaper sheets (included). This set is a set of sanding pads that no one should be without.
• The Contour Sanding Grip pads are double-ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one and a concave profile at the other along with a narrow flexible section in the middle that can be used for sanding
• Our Angled Contour Grip sanding pads change the angle sanding game by providing you the ability to sand inside angles without flattening or smoothing the crispness of your original profile. Not only does this set contain inside angle profile pads, there are 1/8 and round overs, various non specific round over profile and of course the flat sanding grip to sand general shapes and objects.
• This 11pc set comes with the following: 2.6mm thick flexible pad, 1/8 and radius round over grip, 90 degree grip, 60 and 75 degree grip, 30 and 45 degree grip and 1 each contour grips with the following inside/outside diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' and 7/8''.
• See more on Amazon...

Features

• NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
• LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
• OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
• 304 STAINLESS STEEL HOSE CLAMP- The 2 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
• FLEXIBLE ADJUSTABLE SIZE RANGE- 2 1/2 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 2-7/8 (2.877 or 73.08mm) in full diameter down to appx. 1-7/8 (1.874 or 47.61mm) at its most compact diameter.
• See more on Amazon...

Features

• Scraper burnishers are a staple in most every woodworkers shop. They are used to create a burr or an edge on card scrapers so that the scrapers can produce clean, smooth wood surfaces by scraping the wood. Most woodworkers love to use scrapers simply because they produce a wonderful looking end result that are beyond compare to most any other device.
• This burnisher is simple in design and is made specifically to create burrs on the edges of flat, curved or beveled card scrapers. The hardened, polished high carbon HRC 62-64 steel rod measures approximately 3/8 inch in diameter which makes it perfect for working the edges of your scrapers without any give. The hardwood handle gives you a comfortable firm grip and helps provide leverage when placing pressure on the scraper.
• The 6 included scrapers are made from a strong carbon steel and come in various shapes for a wide variety of applications. The three rectangle scrapers of various thicknesses in this pack will work for the vast majority of your projects. The curved (convex and concave curves), gooseneck and beveled scrapers are ideal for working oddly shaped pieces like chairs, spindles, boxes and more.
• If you have never used a burnisher, it is relatively simple to use. The idea is to roll the edges of your scraper to create a burr so that it produces fine, light shavings and makes the wood surface very smooth. To do this, you simply tilt the burnisher slightly to one side of the scraper and run the burnisher along the edge repeatedly until you produce the burr you are looking for.
• Once your scrapers have the desired burr on each edge, you ll be able to produce wonderful looking results on your wooden surfaces. Scrapers are perfect making your surfaces extra smooth and ready for light sanding for the finishing process. We highly recommend burnishing each scraper out of the box for optimum performance. Also included is a handy booklet on How to Sharpen a Card Scraper Using A Burnisher to get you started right out of the box.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• Three racks, each pre drilled 16 inches on center and each with opposing modular tabs on both ends for the ultimate space saving clamp rack system! Simply attach one rack to your standard 16 inch on center wall studs and your ready to easily and quickly align the other two clamp racks using the opposing modular tabs as your guide. The racks fit together for a perfect fit on your wall, saving you valuable space and keeping your clamps organized!
• The modular tabs are precision milled to fit perfectly with the next clamp rack. In this pack, we have included three 16 inch on center racks to give you a full 48 inches of clamp rack storage! Designed to be mounted directly to your workshop or garage wall studs, the racks can also be mounted to standard dry wall. We recommend using a stud finder to locate your 16 inch on center marks before mounting.
• The tabs fit together like puzzle pieces so there is zero guess work involved. You can add as many racks as you need to store all of your clamps in one convenient space. Another great feature is that you can configure the racks anywhere on your wall to accommodate for longer or shorter clamps. In other words, you don t have to have the racks in one single line. You can stack them top to bottom as needed.
• Each rack is made of heavy duty steel so they can hold your heavier clamps without fail and stand up to daily workshop use. The racks have an angled front lip to keep your clamps in place so they wont accidentally slide out when not in use.
• Available in 3 styles: Pipe clamp rack, F-Clamp Rack and Bar/Parallel Clamp Rack. Each of those racks are available in packs of 3. We also have a pack of 3 racks that includes one of each: Pipe clamp rack, F-Clamp Rack and Bar/Parallel Clamp Rack. Mounting hardware is included with each 3 pack of clamp racks.The 3 pack of Pipe Clamp Racks holds up to 21 clamps, F-Clamp Rack pack holds up to 30 clamps and the Bar/Parallel Clamp Rack pack holds up to 21 clamps.
• See more on Amazon...

Features

• If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process
• Cross-cutting small pieces can be challenging and sometimes a bit dangerous. We can use a standard miter gauge, but that will typically let the cut off piece loose and it can fly off the table or into the saw blade opening. In steps our Crosscut Sled with Stop Block and Adjustable Rails. This little sled makes cutting off small pieces a breeze.
• While you can crosscut small pieces with this sled, you can also crosscut panels up to 13-1/2 inches wide. This makes it perfect for all kinds of projects where you need a straight line crosscut that a miter saw simply can not make. It s the perfect mid length cross cut solution.
• The sled platform runs on two aluminum tracks that can be adjusted side to side to fit most any table saw. The aluminum tracks are designed to fit into standard x 3/8 miter slots. The tracks will not fit Ryobi table saw slots as well as a few other outlier table saws. We ask that you please measure your slots before ordering.
• The stop block is made from a composite material so if it accidentally comes into to contact with the saw blade, it will not damage the blade. The stop can be used on either side of the sled and is ideal for duplicating the same length of cut over and over again as needed. The sled measures approximately 18 long by 16 wide (measuring the base).
• See more on Amazon...

Features

• We have all been in a situation where we need to quickly turn the power off on our router table or contractor table saw and both of our hands are a bit pre-occupied. Reaching down and underneath your router table or contractor table saw to try and locate the power switch can be very cumbersome as well as very dangerous while your feeding stock through.Many router table setups don t even have an external power switch separate from the router itself.
• With this uniquely designed and easy to locate Paddle Button Stop Power Tool Switch you can simply bump the large stop sign paddle with your knee or hip to shut the power off. That means both of your hands can stay engaged on the project while you bump the power off with your hip or knee. A large green START button is always visible on the top side of the paddle. Simply push the START button to power on.
• Install the switch near or at hip level or in a position that you will be able to bump it when needed. The switch comes with installation hardware and can be mounted to most any type of material. The unit has two cords. The heavy duty female cord is 18 long and designed to accept the power source plug from your power tool. The heavy duty male cord is approximately 66 inches long and is used to plug the switch unit into your standard wall outlet.
• Please take note that the Paddle Button Stop Power Tool Switch is 15 amps and will not work with power tools drawing higher amperage. Keep this in mind when connecting to your machinery. This switch was designed to work with smaller machinery like routers and smaller table saws. Check your machinery before using this product.
• The stop sign paddle measures approximately 5-3/8 tall by 3-7/16 wide to make it easy to see and even easier to contact when needed. Mounting hardware is included but some surfaces my require hardware that does not come with the switch for proper mounting.
• See more on Amazon...

Features

• Three racks, each pre drilled 16 inches on center and each with opposing modular tabs on both ends for the ultimate space saving clamp rack system! Simply attach one rack to your standard 16 inch on center wall studs and your ready to easily and quickly align the other two clamp racks using the opposing modular tabs as your guide. The racks fit together for a perfect fit on your wall, saving you valuable space and keeping your clamps organized!
• The modular tabs are precision milled to fit perfectly with the next clamp rack. In this pack, we have included three 16 inch on center racks to give you a full 48 inches of clamp rack storage! Designed to be mounted directly to your workshop or garage wall studs, the racks can also be mounted to standard dry wall. We recommend using a stud finder to locate your 16 inch on center marks before mounting.
• The tabs fit together like puzzle pieces so there is zero guess work involved. You can add as many racks as you need to store all of your clamps in one convenient space. Another great feature is that you can configure the racks anywhere on your wall to accommodate for longer or shorter clamps. In other words, you don t have to have the racks in one single line. You can stack them top to bottom as needed.
• Each rack is made of heavy duty steel so they can hold your heavier clamps without fail and stand up to daily workshop use. The racks have an angled front lip to keep your clamps in place so they wont accidentally slide out when not in use.
• Available in 3 styles: Pipe clamp rack, F-Clamp Rack and Bar/Parallel Clamp Rack. Each of those racks are available in packs of 3. We also have a pack of 3 racks that includes one of each: Pipe clamp rack, F-Clamp Rack and Bar/Parallel Clamp Rack. Mounting hardware is included with each 3 pack of clamp racks.The 3 pack of Pipe Clamp Racks holds up to 21 clamps, F-Clamp Rack pack holds up to 30 clamps and the Bar/Parallel Clamp Rack pack holds up to 21 clamps.
• See more on Amazon...

Features

• NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
• LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
• OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
• 304 STAINLESS STEEL HOSE CLAMP- The 4 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
• FLEXIBLE ADJUSTABLE SIZE RANGE- 4 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 4-7/16 (4.440 or 112.77mm) in full diameter down to appx. 3-7/16 (3.440 or 87.32mm) at its most compact diameter.
• See more on Amazon...

Features

• Designed and optimized for use with standard size pocket holes these screws are perfect for helping you build most any type of project around the house or workshop. Measuring in at 1 inches long, these screws are perfect for standard inch stock.
• With pocket holes, you are always going to hit the spot when driving the screws. After each pocket hole is drilled (with a jig that is NOT included), you simply place the screw into the center of the pocket hole which has a step down hole in the center. This makes the driving process a breeze. Please note that a pocket hole jig and drill bit are required to create a correctly placed pocket hole. Pocket hole jig and drill bit are NOT included.
• Each screw features a washer style head with a square driver. The washer style head keeps the screw from being drilled too far into the stock. It s almost like having a built in depth stop for screws. The number 2 square driver head works with the included 6 number 2 square driver. Square drivers tend to work much better and more efficiently than standard screwdriver tips. This means less slippage when driving the screws.
• This screw type also features a zinc coating and a super sharp, self tapping tip. The zinc coating makes these screws perfect for indoor use. The coating also makes the screw driving process much smoother than standard un-coated screws. The sharp, self tapping tip really bites into your stock and always hits the mark.
• This #8 x 1 inch pocket hole screw pack includes 1000 screws (500 fine screws and 500 coarse screws) and two 6 inch long #2 square tip drivers with round shanks. The round shank prevents marring and also prevents hand discomfort in the event that you need to hold the bit steady when drive a pocket hole screw.
• See more on Amazon...

Features

• Three racks, each pre drilled 16 inches on center and each with opposing modular tabs on both ends for the ultimate space saving clamp rack system! Simply attach one rack to your standard 16 inch on center wall studs and your ready to easily and quickly align the other two clamp racks using the opposing modular tabs as your guide. The racks fit together for a perfect fit on your wall, saving you valuable space and keeping your clamps organized!
• The modular tabs are precision milled to fit perfectly with the next clamp rack. In this pack, we have included three 16 inch on center racks to give you a full 48 inches of clamp rack storage! Designed to be mounted directly to your workshop or garage wall studs, the racks can also be mounted to standard dry wall. We recommend using a stud finder to locate your 16 inch on center marks before mounting.
• The tabs fit together like puzzle pieces so there is zero guess work involved. You can add as many racks as you need to store all of your clamps in one convenient space. Another great feature is that you can configure the racks anywhere on your wall to accommodate for longer or shorter clamps. In other words, you don t have to have the racks in one single line. You can stack them top to bottom as needed.
• Each rack is made of heavy duty steel so they can hold your heavier clamps without fail and stand up to daily workshop use. The racks have an angled front lip to keep your clamps in place so they wont accidentally slide out when not in use.
• Available in 3 styles: Pipe clamp rack, F-Clamp Rack and Bar/Parallel Clamp Rack. Each of those racks are available in packs of 3. We also have a pack of 3 racks that includes one of each: Pipe clamp rack, F-Clamp Rack and Bar/Parallel Clamp Rack. Mounting hardware is included with each 3 pack of clamp racks.The 3 pack of Pipe Clamp Racks holds up to 21 clamps, F-Clamp Rack pack holds up to 30 clamps and the Bar/Parallel Clamp Rack pack holds up to 21 clamps.
• See more on Amazon...

Features

• Perfect for sanding wooden bowls, platters and more. Includes: 1 , 2 , and 3 Mandrels with foam padding and hook and loop interface. 10 each 80 grit, 10 each 120 grit, 10 each 150 grit and 10 each 220 grit. Each Mandrel size also comes with 1 each soft interface pad and 1 each medium interface pad.
• The shank sanding mandrels have a thick padded base that conforms to concave or convex surfaces. Simply secure the mandrel into a variable speed drill or flexible shaft and you re ready to go
• The padded base is a firm pad that works well with broader curved surfaces. The medium interface pad works well with tighter curves like those found on larger wood turned bowls. The soft interface pad is perfect for smaller, tighter curves and radii.
• The padded base mandrel and each interface pad are hook and loop compatible and will accept most any corresponding size hook and loop sandpaper disc. The shank is in diameter and will fit most any standard size drill style chuck.
• Heat is the enemy of any sanding project. When using these sanders on a lathe, we recommend that you set lathe at the slowest speed possible. This allows you to rough sand the bowl without burning the bowl or damaging the sander
• See more on Amazon...

Features

• The 4 to 2 dual port Y splitter provides you with the ability to reduce a 4 port (with an adapter fitting -not included or a simple hose section also not included) down into two separate 2 hose lines. This is perfect for shops that have multiple machines with 2 ports like sanders, benchtop band saws, router tables and more!
• The 4 end can be inserted into a 4 section of hose and secured by a hose clamp. Please note that the 4 end will not fit inside of standard 4 ports. It is designed to be inserted into standard 4 hose or dust collection couplers specifically made to fit 4 ports or flanges.
• The two separate 2 ends of the fitting can be inserted into standard 2 hose and secured by a hose clamp. Please note that the 2 end will not fit inside of standard 2 ports. It is designed to be inserted into standard 2 hose or dust collection couplers specifically made to fit 2 ports or flanges.
• The 4 to 2 dual port Y splitter is ideal most any workshop that needs to split the dust collector airflow into separate smaller machinery. To reduce down from a 4 machine port, you will likely need to a 4 hose section (NOT included) or a 4 adapter/coupler for proper installation.
• Made from ABS plastic, this fitting is designed to stand up to prolonged daily workshop usage. Hose clamps are required for a proper seal and are NOT included with the fitting. PORT DIMENSIONS: 4 Nominal OD 3.902 or 3-29/32 , ID 3.733 or 3-47/64 2-1/2 Nominal OD 2.5 or 2-1/2 , ID 2.32 or 2-21/64
• See more on Amazon...

Features

• The Contour Sanding Grip pads are double ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one end and a matching concave profile at the other end along with a narrow flexible section in the middle that can also be used for sanding.
• Each durable, flexible rubber grip allows you to easily sand concave or convex profiles without distorting the radius. The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house.
• These 6 grips with 12 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9 x 11 sanding sheets or 3 wide sandpaper rolls (sold separately). This set is a set of sanding pads that no one should be without.
• No more rolling or folding sandpaper to get the job done. This set is the perfect set for any homeowner, hobbyist, woodworker or even professionals! Makes sanding those tough jobs easy and fast without wasting money on torn sandpaper.
• This package includes 6 contour grips with the following inside/outside diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' and 7/8''. Diameters are molded into the rubber pad for easy selection.
• See more on Amazon...

Features

• When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts.
• The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence.
• Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simply be flipped it up and out of your way when not in use.
• The Fulton Aluminum Miter Fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. On the back, there is an offset track for mounting the fence to a miter gauge.
• The fence can be mounted to low profile miter gauges or standard profile miter gauges simply by flipping the fence over to accommodate your miter gauge. This fence will fit most available after market and factory table saw miter gauges, however some modification may be required. Full color installation instructions are included.
• See more on Amazon...

Features

• When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
• ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
• PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
• This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
• While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
• See more on Amazon...

Features

• For those of us who work in a shop environment or have a garage type workshop, odds are that you will come across an accessory or two that uses this type of by 20 tpi through-hole knob and bolt. Or maybe you like to build your own jigs and fixtures for jobs you do over and over again. Either way you are going to need a few of knob and bolts like these to secure or affix your jigs and fixtures through out your shop.
• Typically, these through-hole knobs and bolts are used with mini slot track (NOT INCLUDED), however, the 1 long bolts can fit through or thick stock to secure or affix most any type of object. Trying to find the right length bolt is always a challenge but NOT with this through-hole knob. The top of the knob is open so that the bolt can pass through the knob no matter what length bolt you use. This makes using this knob with any project quick and simple.
• Many different workshop accessories use by 20 tpi bolts. Router bit guards, stop blocks, flip stops, fence feather boards, tabletop feather boards, router table fences, router table tracks, miter gauge fences and a whole lot more can use x 20 tpi through-hole knobs and bolts. The through-hole knobs and bolts are the perfect replacements for lost or damaged knobs and bolts for all of those accessories and more!
• Another great feature of this pack is that they will fit in different brands and styles of t-slot track. Universal Track and Double Cut Tracks are essentially the same type of track that are designed to accept both standard hex head bolts and t-style bolts. The bolt will also fit High-end Anodized Mini T-Track with no play and provide a smooth adjustment in the track. High-end Anodized Mini T-Track accepts hex head bolts and holds better with much less play than universal or double cut tracks.
• This handy hardware pack comes with 10 through-hole knobs with by 20 tpi steel threads, 10 each 1 long, by 20 tpi bolts and 10 each steel washers for use with most aluminum track, jigs, fixtures and accessories throughout your workshop. Perfect for woodworking, metal working, auto body shops and more!
• See more on Amazon...

Features

• Tired of buckled panels, messy gluing tables, heavy pipe clamps or loss of valuable floor or workbench space? Yeah, we were too! The Panel Max Glue Press System not only eliminates each of these issues, it is also user friendly and can be expanded to accommodate most any size panel you need to glue up! It does all this while producing well laminated boards or flat panels each and every time you use it. Much better than traditional clamps like pipe clamps, f-clamps or bar clamps!
• The Panel Max Glue Press System applies even press on both ends and both sides of your panel project which helps create high quality joints and eliminates buckled or warped panels. This alone is reason enough to include this system in your workshop collection of go to tools. Of course, that s not all. The Panel Max has linking arms or more accurately a top and bottom pressure assembly that adjust to any thickness of stock from 0 up to 5 .
• The length you can clamp is only limited by the length of your wall where the Panel Max is mounted, the number of mounting rails that are installed (where the vertical assemblies are hung from) and the amount of vertical press assemblies you have. Each mounting rail is approx. 39-3/8 in length and my be cut to the desired size if necessary.
• The Panel Max can clamp panel widths up to 41 using stock. With the max thickness stock of 5 you can clamp panel widths up to 39 . You can actually clamp a single large panel, or you can clamp multiple, more narrow panels all at one time up to the capacity of the clamp. To do this, clamp a couple of smaller panels edge to edge and leave out the glue between the first panel outer edge and the next starting edge of the adjacent panel to be glued.
• The Panel Max Glue Press includes 1 each 39 mounting rail and 3 each 43 vertical clamp assemblies. We recommend using one vertical clamp 12 apart on center. Keep this in mind when deciding what you need to get for your most commonly built projects. The Package also includes full instructions to get you started and on your way to gluing up panels and boards with much less effort and aggravation than ever before!
• See more on Amazon...