Ginkman - Buying Guide
Last Updated: 05/06/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Ginkman Wall Charger Station Box, Indoor/Outdoor Wall Charger Box, Combination Lock and Keylock Charging Cable Organizer Connector Case Rainproof Dustproof, Not Only for Tesla
Asin: B0D2HDNP4F | Model: PDX | PartNumber: PDX | Ean: 4537367907094
【Imported High-Hardness Materials】 - Ginkman Charger Box Is Made Of High-Strength And Durable Cold-Roll Steel Sheet, Exquisite Polishing, And A Fine Appearance. The Hinge Is Made Of Zinc Alloy, Which Will Not Rust In Any Environment And Will Not Affect The Opening Of The Door. Tempered Glass Is Dust Prevention And Explosion-Proof, Scratch-Resistant And Anti-Fingerprint, Waterproof, And High Temperature Resistant..
【About Charging Safety】 - Equipped With Mechanical Combination Lock And Keylock, It Can Not Only Be Opened With A Key When The Password Is Forgotten, But Also Ensure That The Charger And Power Cord Are Not Stolen By Others. There Are Ventilation Openings On Both Sides Of The Product, Which Can Dissipate Heat In Both Directions And Dissipate Heat During Charging, Avoiding Excessive Heat That May Affect The Use Of The Product..
【Ip65 Grade & Fully Sealed Design】 - Considering That The Right Angle Is Easy To Be Knocked To Hurt People, The Ginkman Charger Station Box Adopts Ip65 Grade Water-Resistant Materials, And The Top Edge Is Designed With Bevel, Even If When It Is Raining, Rainwater Runs Down Fully Sealed Charging Box Without The Fear Of Rain Penetration..
【Large Internal Capacity】 -The Internal Capacity Is Large And Can Accommodate All Cables And Accessories. There Are Reserved Holes And Support Brackets To Assemble The Distribution Box, Making It Easy To Check The Charging Situation And Internal Circuits, Avoiding Wiring Confusion, Entanglement, And Short Circuits. Internal Size: 19.29 * 27.17 * 7.48 Inch / 49 * 69 * 19 Cm. Outer Dimensions: 16.04 In * 22.96 In * 8.20 In /50 * 70 * 25 Cm..
Features
- Wall-Mounted Charger Suitable For 90% Of Vehicle Models - This charging case can not only serve Tesla, but also be used for 90% of car models on the market, meeting the diverse needs of car owners and offering higher cost-effectiveness.
- Large Internal Capacity -The internal capacity is large and can accommodate all cables and accessories. There are reserved holes and support brackets to assemble the distribution box, making it easy to check the charging situation and internal circuits, avoiding wiring confusion, entanglement, and short circuits. Internal size: 19.29 * 27.17 * 7.48 inch / 49 * 69 * 19 cm. Outer Dimensions: 16.04 in * 22.96 in * 8.20 in /50 * 70 * 25 cm.
- IMPORTED HIGH-HARDNESS MATERIALS - Ginkman charger box is made of high-strength and durable cold-roll steel sheet, exquisite polishing, and a fine appearance. The hinge is made of zinc alloy, which will not rust in any environment and will not affect the opening of the door. Tempered glass is dust prevention and explosion-proof, scratch-resistant and anti-fingerprint, waterproof, and high temperature resistant.
- IP65 GRADE & FULLY SEALED DESIGN - Considering that the right angle is easy to be knocked to hurt people, the Ginkman charger station box adopts IP65 grade water-resistant materials, and the top edge is designed with bevel, even if when it is raining, rainwater runs down fully sealed charging box without the fear of rain penetration.
- ABOUT CHARGING SAFETY - Equipped with mechanical combination lock and keylock, it can not only be opened with a key when the password is forgotten, but also ensure that the charger and power cord are not stolen by others. There are ventilation openings on both sides of the product, which can dissipate heat in both directions and dissipate heat during charging, avoiding excessive heat that may affect the use of the product.
- See more on Amazon...
Brand: Ginkman | Manufacturer: Ginkman
Warranty: 18 moth warranty
See On Amazon #2
Ginkman Wall Charger Station Box, Indoor/Outdoor Wall Charger Box, Combination Lock And Keylock Charging Cable Organizer Connector Case Rainproof Dustproof, Not Only For Tesla
Asin: B0D1QH1F22 | Model: Charger Station Box | PartNumber: Charger Station Box | Ean: 4537367907070
【Imported High-Hardness Materials】 - Ginkman Charger Box Is Made Of High-Strength And Durable Cold-Roll Steel Sheet, Exquisite Polishing, And A Fine Appearance. The Hinge Is Made Of Zinc Alloy, Which Will Not Rust In Any Environment And Will Not Affect The Opening Of The Door. Tempered Glass Is Dust Prevention And Explosion-Proof, Scratch-Resistant And Anti-Fingerprint, Waterproof, And High Temperature Resistant..
【About Charging Safety】 - Equipped With Mechanical Combination Lock And Keylock, It Can Not Only Be Opened With A Key When The Password Is Forgotten, But Also Ensure That The Charger And Power Cord Are Not Stolen By Others. There Are Ventilation Openings On Both Sides Of The Product, Which Can Dissipate Heat In Both Directions And Dissipate Heat During Charging, Avoiding Excessive Heat That May Affect The Use Of The Product..
【Ip65 Grade & Fully Sealed Design】 - Considering That The Right Angle Is Easy To Be Knocked To Hurt People, The Ginkman Charger Station Box Adopts Ip65 Grade Water-Resistant Materials, And The Top Edge Is Designed With Bevel, Even If When It Is Raining, Rainwater Runs Down Fully Sealed Charging Box Without The Fear Of Rain Penetration..
【Large Internal Capacity】 -The Internal Capacity Is Large And Can Accommodate All Cables And Accessories. There Are Reserved Holes And Support Brackets To Assemble The Distribution Box, Making It Easy To Check The Charging Situation And Internal Circuits, Avoiding Wiring Confusion, Entanglement, And Short Circuits. Internal Size: 19.29 * 27.17 * 7.48 Inch / 49 * 69 * 19 Cm. Outer Dimensions: 16.04 In * 22.96 In * 8.20 In /50 * 70 * 25 Cm..
Features
- Wall-Mounted Charger Suitable For 90% Of Vehicle Models - This charging case can not only serve Tesla, but also be used for 90% of car models on the market, meeting the diverse needs of car owners and offering higher cost-effectiveness.
- Large Internal Capacity -The internal capacity is large and can accommodate all cables and accessories. There are reserved holes and support brackets to assemble the distribution box, making it easy to check the charging situation and internal circuits, avoiding wiring confusion, entanglement, and short circuits. Internal size: 19.29 * 27.17 * 7.48 inch / 49 * 69 * 19 cm. Outer Dimensions: 16.04 in * 22.96 in * 8.20 in /50 * 70 * 25 cm.
- IMPORTED HIGH-HARDNESS MATERIALS - Ginkman charger box is made of high-strength and durable cold-roll steel sheet, exquisite polishing, and a fine appearance. The hinge is made of zinc alloy, which will not rust in any environment and will not affect the opening of the door. Tempered glass is dust prevention and explosion-proof, scratch-resistant and anti-fingerprint, waterproof, and high temperature resistant.
- IP65 GRADE & FULLY SEALED DESIGN - Considering that the right angle is easy to be knocked to hurt people, the Ginkman charger station box adopts IP65 grade water-resistant materials, and the top edge is designed with bevel, even if when it is raining, rainwater runs down fully sealed charging box without the fear of rain penetration.
- ABOUT CHARGING SAFETY - Equipped with mechanical combination lock and keylock, it can not only be opened with a key when the password is forgotten, but also ensure that the charger and power cord are not stolen by others. There are ventilation openings on both sides of the product, which can dissipate heat in both directions and dissipate heat during charging, avoiding excessive heat that may affect the use of the product.
- See more on Amazon...
Brand: Ginkman | Manufacturer: Ginkman
Warranty: 18 moths warranty
See On Amazon #3
GINKMAN Wall Charger Station Box, Indoor/Outdoor Wall Charger Box, Combination Lock and Keylock Charging Cable Organizer Connector Case Rainproof Dustproof, Not Only for Tesla
Asin: B0D1KKZXL2 | Model: Charger Station Box | PartNumber: Charger Station Box | Ean: 4537367907063
【Imported High-Hardness Materials】 - Ginkman Charger Box Is Made Of High-Strength And Durable Cold-Roll Steel Sheet, Exquisite Polishing, And A Fine Appearance. The Hinge Is Made Of Zinc Alloy, Which Will Not Rust In Any Environment And Will Not Affect The Opening Of The Door. Tempered Glass Is Dust Prevention And Explosion-Proof, Scratch-Resistant And Anti-Fingerprint, Waterproof, And High Temperature Resistant..
【About Charging Safety】 - Equipped With Mechanical Combination Lock And Keylock, It Can Not Only Be Opened With A Key When The Password Is Forgotten, But Also Ensure That The Charger And Power Cord Are Not Stolen By Others. There Are Ventilation Openings On Both Sides Of The Product, Which Can Dissipate Heat In Both Directions And Dissipate Heat During Charging, Avoiding Excessive Heat That May Affect The Use Of The Product..
【Ip65 Grade & Fully Sealed Design】 - Considering That The Right Angle Is Easy To Be Knocked To Hurt People, The Ginkman Charger Station Box Adopts Ip65 Grade Water-Resistant Materials, And The Top Edge Is Designed With Bevel, Even If When It Is Raining, Rainwater Runs Down Fully Sealed Charging Box Without The Fear Of Rain Penetration..
【Large Internal Capacity】 -The Internal Capacity Is Large And Can Accommodate All Cables And Accessories. There Are Reserved Holes And Support Brackets To Assemble The Distribution Box, Making It Easy To Check The Charging Situation And Internal Circuits, Avoiding Wiring Confusion, Entanglement, And Short Circuits. Internal Size: 19.29 * 27.17 * 7.48 Inch / 49 * 69 * 19 Cm. Outer Dimensions: 16.04 In * 22.96 In * 8.20 In /50 * 70 * 25 Cm..
Features
- Wall-Mounted Charger Suitable For 90% Of Vehicle Models - This charging case can not only serve Tesla, but also be used for 90% of car models on the market, meeting the diverse needs of car owners and offering higher cost-effectiveness.
- Large Internal Capacity -The internal capacity is large and can accommodate all cables and accessories. There are reserved holes and support brackets to assemble the distribution box, making it easy to check the charging situation and internal circuits, avoiding wiring confusion, entanglement, and short circuits. Internal size: 19.29 * 27.17 * 7.48 inch / 49 * 69 * 19 cm. Outer Dimensions: 16.04 in * 22.96 in * 8.20 in /50 * 70 * 25 cm.
- IMPORTED HIGH-HARDNESS MATERIALS - Ginkman charger box is made of high-strength and durable cold-roll steel sheet, exquisite polishing, and a fine appearance. The hinge is made of zinc alloy, which will not rust in any environment and will not affect the opening of the door. Tempered glass is dust prevention and explosion-proof, scratch-resistant and anti-fingerprint, waterproof, and high temperature resistant.
- IP65 GRADE & FULLY SEALED DESIGN - Considering that the right angle is easy to be knocked to hurt people, the Ginkman charger station box adopts IP65 grade water-resistant materials, and the top edge is designed with bevel, even if when it is raining, rainwater runs down fully sealed charging box without the fear of rain penetration.
- ABOUT CHARGING SAFETY - Equipped with mechanical combination lock and keylock, it can not only be opened with a key when the password is forgotten, but also ensure that the charger and power cord are not stolen by others. There are ventilation openings on both sides of the product, which can dissipate heat in both directions and dissipate heat during charging, avoiding excessive heat that may affect the use of the product.
- See more on Amazon...
Brand: Ginkman | Manufacturer: Ginkman
Dimensions: 21.17 x 7.48 x 19.29 inches
Warranty: 18 moths warranty
See On Amazon