Griffco Products - Buying Guide
Last Updated: 05/07/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
1.5 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins
Asin: B07GN1BLC4 | Model: CSM450GW1270MM | PartNumber: CSM450GW1270MM
Use To Build Thickness - About 1/22" Or .045" Per Layer.
Conforms To Mold Details Better Than Woven Roving.
Uniform Strength And Stiffness In All Directions.
Use As A Bond Layer Between Layers Of Woven Roving.
Features
- Use for "print through" barrier between gel coat and woven roving
- Use as a bond layer between layers of woven roving
- Use to build thickness - about 1/22 or .045 per layer
- Uniform strength and stiffness in all directions
- Conforms to mold details better than woven roving
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products
Weight: 3.52 pounds
See On Amazon #2
(Rolled) 1708 Biaxial (+45 /-45 ) Stitched Fiberglass with 3/4 oz. Mat on One Side - 3 Yards X 50" Wide, Rolled (Epoxy and Polyester Compatible)
Asin: B087BG4VF9
Non-Woven Construction Allows For More Conform-Ability Of The Material.
Higher Glass To Resin Ratio Compared To Woven Roving..
Used For Boat Construction, Wind Turbine Blades, Snowboards, Skateboards, Skis And Auto Body Repair.
The Opposing (+45°/-45°) Fiber Alignment Helps Prevent Twisting.
Features
- Very good wet out and high build rate (.044")
- The opposing (+45 /-45 ) fiber alignment helps prevent twisting
- Non-woven construction allows for more conform-ability of the material
- Used for boat construction, wind turbine blades, snowboards, skateboards, skis and auto body repair
- Higher glass to resin ratio compared to woven roving.
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products
See On Amazon #3
1/4 Inch Chopped Fiberglass Strands - 100% E-Glass Fibers for Bulk Molding Compound and Filler Reinforcement - Epoxy/Polyester/Vinyl Ester Compatible
Asin: B0849L1M9N | Model: BMC6MMX1 | PartNumber: BMC6MMX1
Easy Control Of Glass Loading.
Good Electrical Insulation Properties.
Excellent Mechanical Properties.
Excellent Flow-Ability.
Features
- High strand integrity and low fuzz
- Excellent flow-ability
- Easy control of glass loading
- Excellent mechanical properties
- Good electrical insulation properties
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products
See On Amazon #4
1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins
Asin: B01N20MS32 | Model: CSM300GW1270MM | PartNumber: CSM300GW1270MM
Use To Build Thickness - About 1/32" Or .030" Per Layer.
Conforms To Mold Details Better Than Woven Roving.
Uniform Strength And Stiffness In All Directions.
Use As A Bond Layer Between Layers Of Woven Roving.
Features
- Use for "print through" barrier between gel coat and woven roving
- Use as a bond layer between layers of woven roving
- Use to build thickness - about 1/32 or .030 per layer
- Uniform strength and stiffness in all directions
- Conforms to mold details better than woven roving
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products
See On Amazon #5
1 Oz. Fiberglass Chopped Strand Mat - 1 Square Yard (26" X 50") for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins
Asin: B07TZF7948 | Model: CSM300GW1270MM-1 | PartNumber: CSM300GW1270MM-1
Use To Build Thickness - About 1/32" Or .030" Per Layer.
Conforms To Mold Details Better Than Woven Roving.
Uniform Strength And Stiffness In All Directions.
Use As A Bond Layer Between Layers Of Woven Roving.
Features
- Use for "print through" barrier between gel coat and woven roving
- Use as a bond layer between layers of woven roving
- Use to build thickness - about 1/32 or .030 per layer
- Uniform strength and stiffness in all directions
- Conforms to mold details better than woven roving
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products LLC
Weight: 0.56 pounds
See On Amazon #6
1.5 Oz. Fiberglass Chopped Strand Mat - 1 Square Yard (26" X 50") for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins
Asin: B09542QBT9 | Model: 1.5X1 CSM | PartNumber: 1.5X1 CSM
Use To Build Thickness - About 1/22" Or .045" Per Layer.
Conforms To Mold Details Better Than Woven Roving.
Uniform Strength And Stiffness In All Directions.
Use As A Bond Layer Between Layers Of Woven Roving.
Features
- Use for "print through" barrier between gel coat and woven roving
- Use as a bond layer between layers of woven roving
- Use to build thickness - about 1/22 or .045 per layer
- Uniform strength and stiffness in all directions
- Conforms to mold details better than woven roving
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products
See On Amazon #7
1.5 Oz. Fiberglass Chopped Strand Mat (Epoxy/Polyester Compatible) - 10 Yards X 50" Wide - Rolled - for Hand Layup, Vacuum Bagging or molding Composites
Asin: B08DJDDB84
Use To Build Thickness - About 1/22" Or .045" Per Layer.
Conforms To Mold Details Better Than Woven Roving.
Uniform Strength And Stiffness In All Directions.
Use As A Bond Layer Between Layers Of Woven Roving.
Features
- Use for "print through" barrier between gel coat and woven roving
- Use as a bond layer between layers of woven roving
- Use to build thickness - about 1/22 or .045 per layer
- Uniform strength and stiffness in all directions
- Conforms to mold details better than woven roving
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products
See On Amazon #8
1 Oz. Fiberglass Chopped Strand Mat (Epoxy/Polyester Compatible) - 10 Yards X 50" Wide - Rolled - for Hand Layup, Vacuum Bagging or molding Composites
Asin: B074KRHSDS
Use To Build Thickness - About 1/32" Or .030" Per Layer.
Conforms To Mold Details Better Than Woven Roving.
Uniform Strength And Stiffness In All Directions.
Use As A Bond Layer Between Layers Of Woven Roving.
Features
- Use for "print through" barrier between gel coat and woven roving
- Use as a bond layer between layers of woven roving
- Use to build thickness - about 1/32 or .030 per layer
- Uniform strength and stiffness in all directions
- Conforms to mold details better than woven roving
- See more on Amazon...
Brand: Griffco Products | Manufacturer: Griffco Products LLC
See On Amazon