H.B. Fuller - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from H.B. Fuller on Amazon
- PVC TrimWelder Nail Eraser PVC Grade Eraser Wax Crayon, Fill in Nail Holes up to 1/8 of an Inch, Use...
- Foster First Defense 40-80 Disinfectant Cleaner. For Home, Hospital, Institutional and Industrial Us...
- PVC TrimWelder White Hot 5 oz Squeeze Tube, Bright White with UV Protectant, Thick Solvent-Based Adh...
- PVC TrimWelder Nail Sticks 4 Ounce, for Filling Nail Holes in PVC, Cures Off-White to Light Grey, Us...
- H.B. Fuller Double Bubble Extra Fast Setting Epoxy - Includes 10 Packets | 15 to 30 Min to Handling ...
- PVC TrimWelder Slow Cure 50 ML Cartridge and 2 Included Qwik Mixers, Will not Foam, Run or Drip, Rea...
- PVC TrimWelder 220/400 ML QwikMixer Mixers, Bag of 24 Twist Lock Mixers, Less Waste through Lower In...
- H.B. Fuller Hot Melt Insulating Glass Butyl Sealant HL5130149 CAH CV (18 Boxes) | One-Component Insu...
- H.B. Fuller HL2053 Hot Melt Tape and Label Adhesive - Color: Light Amber | General Purpose Heat Acti...
- PVC TrimWelder 50 ML COX Manual Dispense Gun, Rigid Glass Reinforced Nylon Engineered Plastic, Light...
#1
PVC TrimWelder Nail Eraser PVC Grade Eraser Wax Crayon, Fill in Nail Holes up to 1/8 of an Inch, Use on Unpainted PVC Trim, Scrub and Wipe into Nail Hole
Asin: B0BSP3T37G
Instructions For Use: Apply Via Scrubbing Tip Back And Forth Over Hole. Then, Wipe Clean And Flush With Dry Paper Towel To Ensure A Smooth Finish..
Packaging: This Product Is Packaged In Convenient Blister Pack For More Than Secure Holding And Easy Access To Get It When You Need It Most..
Detail And Specifications: This Product Includes A 1-Year Minimum Shelf Life, Giving You Time Store This Product Until You Need It. Take Note And Replace When Needed..
Resists Yellowing: Nail Erasers Have A Special Blend Of Fillers To Resist Yellowing And Have Been Lab Tested For Hole Retention On Cellular Pvc..
Features
- EASY TO USE: Easiest way to fill brad, staple, and nail holes PVC Trim Board which will remain unpainted. If the trim is to be painted, use PVC TrimWelder Fast Cure for best results.
- RESISTS YELLOWING: Nail Erasers have a special blend of fillers to resist yellowing and have been lab tested for hole retention on cellular PVC.
- INSTRUCTIONS FOR USE: Apply via scrubbing tip back and forth over hole. Then, wipe clean and flush with dry paper towel to ensure a smooth finish.
- DETAIL AND SPECIFICATIONS: This product includes a 1-year minimum shelf life, giving you time store this product until you need it. Take note and replace when needed.
- PACKAGING: This product is packaged in convenient blister pack for more than secure holding and easy access to get it when you need it most.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 0.63 x 5.50 x 2.63 inches | Weight: 0.03 Pounds
See On Amazon #2
Foster First Defense 40-80 Disinfectant Cleaner. For Home, Hospital, Institutional and Industrial Use. Deodorizes and Cleanses Most Surfaces. 5 GL Bucket with Handle.
Asin: B010IU9APC | Ean: 0082093408079 | UPC: 082093408079
Safe Practices: Eye Protection Is Strongly Recommended When Using This Product To Avoid Backsplash And Accidental Contamination. Although Not Normally A Skin Hazard, Hands Should Be Washed With Mild Soap After Use To Avoid Accidental Ingestion. Nitrile Gloves Can Be Worn If The Conditions Warrant..
Applications And Uses: Foster First Defense Is Ideal For Deep Cleaning Carpets, Carpet Cushions And Other Porous Materials Such As Subfloors, Drywall, Trim And Frame Lumber, Tackles Strip And Paneling. Great For Businesses Such As Hotels, Nursing Homes, Schools, Motels, And Hospitals, With High Foot-Traffic Throughout The Day..
Epa Registered: Epa Registration Number: 6836-152-63836. This Product Is In Compliance With The Toxic Substances Control Act’S Inventory Requirements. For A Full List Of All Germs, Bacteria And Viruses That Foster First Defense Can Be Used Against, Please Refer To The Product Label..
Ready To Use: This Disinfectant Is Ready To Use Immediately Upon Arrival. To Clean And Deodorize, Apply Undiluted To The Desired Surface With A Cloth, Mop, Sponge, Or Sprayer. Wipe Or Allow To Air Dry. For Stronger Levels Of Disinfection, The Cleaner May Need To Sit On The Surface For Longer Periods Of Time. Please Refer To The Product Label For Specific Care Instructions Depending On Application..
Features
- FOSTER FIRST DEFENCE: Delivers non-acid, bleach-free disinfectant and cleaning performance. Use on washable hard, non-porous surfaces of tables, non-wooden picnic tables, countertops, floors, walls, coils and drain pans of air conditioning and refrigeration equipment and heat pumps and hard, non-porous surfaces made of metal, stainless, steel, fiberglass, (shower stalls or sinks), finished woodwork, upholstery, vinyl, and plastic.
- READY TO USE: This disinfectant is ready to use immediately upon arrival. To clean and deodorize, apply undiluted to the desired surface with a cloth, mop, sponge, or sprayer. Wipe or allow to air dry. For stronger levels of disinfection, the cleaner may need to sit on the surface for longer periods of time. Please refer to the product label for specific care instructions depending on application.
- SAFE PRACTICES: Eye protection is strongly recommended when using this product to avoid backsplash and accidental contamination. Although not normally a skin hazard, hands should be washed with mild soap after use to avoid accidental ingestion. Nitrile gloves can be worn if the conditions warrant.
- EPA REGISTERED: EPA Registration Number: 6836-152-63836. This product is in compliance with the Toxic Substances Control Act s Inventory Requirements. For a full list of all germs, bacteria and viruses that Foster First Defense can be used against, please refer to the product label.
- APPLICATIONS AND USES: Foster First Defense is ideal for deep cleaning carpets, carpet cushions and other porous materials such as subfloors, drywall, trim and frame lumber, tackles strip and paneling. Great for businesses such as hotels, nursing homes, schools, motels, and hospitals, with high foot-traffic throughout the day.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller Construction Products Inc.
Dimensions: 12.25 x 15.00 x 12.25 Inches | Weight: 46.35 pounds
See On Amazon #3
PVC TrimWelder White Hot 5 oz Squeeze Tube, Bright White with UV Protectant, Thick Solvent-Based Adhesive for Joining PVC to Itself, Resealable Cap for Convenience
Asin: B0BSP5LBG1 | Ean: 0850611002319 | UPC: 850611002319
Resealable Packaging: 5 Oz Packaging Can Be Recapped For Future Use. Help Your Product Prevent Itself From Drying Out With The Easy To Re-Seal Cap..
Application Instructions: White Hot Is To Be Used As Supplied In Its Original Container. The Surfaces To Be Adhered Should Be Clean And Free Of Dirt, Oil, Moisture, Etc.. Apply White Hot To The Complete Surface Of The Material Being Joined. Follow Safety Precautions During Use. Hold Parts Together Mechanically While Adhesive Is Curing. Allow 24 Hours Drying At Room Temperature Before Testing..
Detail And Specifications: This Product Includes A 1-Year Shelf Life, Giving You Time Store This Product Until You Need It. Take Note And Replace When Needed..
Fast-Acting: Fast-Acting, Single-Component Material Assures Both Simplicity And Effective Bonding Of Pvc Materials. White Hot Works Quickly To Help Your Projects Done In The Fastest Way Possible..
Features
- MADE FOR PVC PLASTICS: This product is specifically designed for joining PVC (Poly Vinyl Chloride) plastic to itself. White Hot is a fast acting, high strength adhesive.
- FAST-ACTING: Fast-acting, single-component material assures both simplicity and effective bonding of PVC materials. White Hot works quickly to help your projects done in the fastest way possible.
- RESEALABLE PACKAGING: 5 oz packaging can be recapped for future use. Help your product prevent itself from drying out with the easy to re-seal cap.
- DETAIL AND SPECIFICATIONS: This product includes a 1-year shelf life, giving you time store this product until you need it. Take note and replace when needed.
- APPLICATION INSTRUCTIONS: White Hot is to be used as supplied in its original container. The surfaces to be adhered should be clean and free of dirt, oil, moisture, etc.. Apply White Hot to the complete surface of the material being joined. Follow safety precautions during use. Hold parts together mechanically while adhesive is curing. Allow 24 hours drying at room temperature before testing.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 1.00 x 7.00 x 1.75 Inches
See On Amazon #4
PVC TrimWelder Nail Sticks 4 Ounce, for Filling Nail Holes in PVC, Cures Off-White to Light Grey, Useful for Finishing Trim Installations as Needed - Can Be Sanded, Drilled, Sawed and Painted
Asin: B0BSP3Z53Q
Re-Sealable: Nail Stick 4 Oz. Packaging Comes With A Re-Sealable Plastic Tube To Maintain A Longer Shelf Life. Help Your Nail Stick Prevent Itself From Drying Out With The Easy To Re-Seal Packaging That Is Included..
Waterproof And Resists Yellowing: Nail Stick Resist Yellowing, Is Waterproof And Wont Shrink After Curing.. The Elements And Air Will Be Kept At Bay To Keep Your Product Clean And Uniform In Color..
No Measuring Required: Nail Stick Contains Pre-Measured Portions Of Resin And Hardener. No Measuring Required To Help Keep Your Process Simple..
Workable Materials: Nail Sticks Can Be Sanded, Drilled, Sawed And Painted In 2-3 Hours. Nail Stick Is A Fast Setting Specially Formulated Epoxy Putty..
Features
- FILL CRACKS AND HOLES: PVC Nail Stick is a specially formulated, fast setting epoxy putty, designed to fill and repair cracks and holes in PVC lumber, can be used for both interior and exterior environments.
- WORKABLE MATERIALS: Nail Sticks can be sanded, drilled, sawed and Painted in 2-3 hours. Nail Stick is a Fast Setting specially formulated epoxy putty.
- RE-SEALABLE: Nail Stick 4 oz. packaging comes with a re-sealable plastic tube to maintain a longer shelf life. Help your nail stick prevent itself from drying out with the easy to re-seal packaging that is included.
- NO MEASURING REQUIRED: Nail Stick contains pre-measured portions of resin and hardener. No measuring required to help keep your process simple.
- WATERPROOF AND RESISTS YELLOWING: Nail Stick resist yellowing, is waterproof and wont shrink after curing.. The elements and air will be kept at bay to keep your product clean and uniform in color.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 1.00 x 8.00 x 1.00 Inches
See On Amazon #5
H.B. Fuller Double Bubble Extra Fast Setting Epoxy - Includes 10 Packets | 15 to 30 Min to Handling Strength | Performance Adhesive for Metal, Glass, Ceramics, Wood, Concrete and Most Hard Plastics
Asin: B0B75WH12D | Ean: 0723022113618 | UPC: 723022113618
Recommended Substrates: Our Fast-Setting Epoxy Is An Excellent, General Purpose Adhesive And Is Recommended For Carbon Steel, Stainless Steel, Aluminum, Epoxy, Stone, Wood, Glass, China And Leather.
High Performance Adhesives: Double/Bubble Epoxies Are Strong And Versatile. They Contain No Solvents, Will Not Shrink, And Cure At Room Temperature. Epoxies Are Effective Over A Wide Range Of Temperatures. They Are Cost-Efficient Adhesives And Do Not Include Galvanic Corrosion..
10 Individual Packets: This Epoxy Has A Viscosity Similar To Syrup And The Color Is A Translucent Amber. It Come With 10 Handy, Dual-Pouch, One-Shot, Job-Size Package. This Unique Packaging Ensures That Double/Bubble Adhesives Are Always Factory Fresh And Accurately Portioned For Optimum Adhesive Performance..
Typical Uses: Fast-Setting Epoxy Can Be Used To Repair Tools, Auto Parts, Electrical And Electronic Components, Furniture And Other Applications That Require A Fast-Setting Adhesive..
Features
- EXTRA FAST SETTING: Our Fast Setting Epoxy has a three minute work time and is at handling strength in just 15 to 30 minutes making it the perfect solution to rapid repairs.
- TYPICAL USES: Fast-Setting Epoxy can be used to repair tools, auto parts, electrical and electronic components, furniture and other applications that require a fast-setting adhesive.
- RECOMMENDED SUBSTRATES: Our Fast-Setting Epoxy is an excellent, general purpose adhesive and is recommended for Carbon Steel, Stainless Steel, Aluminum, Epoxy, Stone, Wood, Glass, China and Leather
- 10 INDIVIDUAL PACKETS: This Epoxy has a viscosity similar to syrup and the color is a translucent amber. It come with 10 handy, dual-pouch, one-shot, job-size package. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.
- HIGH PERFORMANCE ADHESIVES: Double/Bubble Epoxies are Strong and Versatile. They contain no solvents, will not shrink, and cure at room temperature. Epoxies are effective over a wide range of temperatures. They are cost-efficient adhesives and do not include galvanic corrosion.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 3.00 x 3.50 x 3.50 Inches | Weight: 0.08 pounds
See On Amazon #6
PVC TrimWelder Slow Cure 50 ML Cartridge and 2 Included Qwik Mixers, Will not Foam, Run or Drip, Ready in 90 to 120 Minutes, Medium Viscosity and Solvent-Free
Asin: B0BSP2GW3M
Paintable & Able To Be Sanded: Pvc Slowcure Is A Solvent Free Formulation That Is Both Paintable And Sandable. Pvc Slowcure Can Fill Nail Holes And Gaps Up To 3/8"..
Convenient Packaging: Pvc Trimwelder Slowcure Can Be Applied As Low As 40F And Adhesive Joints Are Ready To Handle In 90 To 120 Minutes. Convenient 50Ml Packaging With Two Included Qwikmixers.
Color-Matching: Pvc Trimwelder Slowcure Is Color Matched To Pvc Boards. Pvc Slowcure Also Has A Creamy Consistency, So It Won't Foam Or Drip..
Strong & Tough: Pvc Trimwelder Slowcure Provides Strong, Tough Bonds To All Forms Of Pvc, Metals As Well As Nylons, Polystyrenes, And Fiberglass. Pvc Slowcure Can Also Withstand Thermal Cycling..
Features
- EXTENDED OPEN TIME: PVC SlowCure adhesive has an open time of 20-30 minutes. This allows for an extended open time for larger applications with handling strength in 90 to 120 minutes.
- STRONG & TOUGH: PVC TrimWelder SlowCure provides strong, tough bonds to all forms of PVC, metals as well as nylons, polystyrenes, and fiberglass. PVC SlowCure can also withstand thermal cycling.
- PAINTABLE & ABLE TO BE SANDED: PVC SlowCure is a solvent free formulation that is both paintable and sandable. PVC SlowCure can fill nail holes and gaps up to 3/8.
- COLOR-MATCHING: PVC TrimWelder SlowCure is color matched to PVC boards. PVC SlowCure also has a creamy consistency, so it won't foam or drip.
- CONVENIENT PACKAGING: PVC TrimWelder SlowCure can be applied as low as 40F and adhesive joints are ready to handle in 90 to 120 minutes. Convenient 50ml packaging with two included QwikMixers
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 1.00 x 7.50 x 4.75 Inches
See On Amazon #7
PVC TrimWelder 220/400 ML QwikMixer Mixers, Bag of 24 Twist Lock Mixers, Less Waste through Lower Internal Volume, Use with Appropriate Ratio Cartridges for an On-Ratio Mix
Asin: B0BSP33BGW
Low Internal Volume: These Twist Lock Mixers Have The Lowest Internal Volume Of Any Thorough Mixer, Creating Much Less Waste. Sold In Convenient Packages Of 24..
Extreme Adhesives: Extreme Adhesives, Inc. Was Founded In 1987 In The State Of New Hampshire Where They Remain Today. Our Goal Is To Bring Our Technology Into New Markets And Provide The Professional Builder And The Diy'er With High Performance Adhesives Suitable For Today's Pvc And Urethane Trim..
Completely Mixes: Ensure A Complete Mix When Adhesive Is Applied. This Makes Sure A Complete, Thorough Mixture To Ensure Effective Adhesion In All Applications..
Easy To Dispense: Dispensable With A Twist Of The Product. This Easy Motions Ensures Both Control Of The Dispensed Amount As Well As Accurate Placement Of The Product For An Easy Finish..
Features
- NO NEED TO GET CLOSE: 220/400 ml QwikMixers- twist lock mixers take the worry out of being close. These twist lock mixers give you the peace of mind to be close enough when in use for your project. When used with our 1:1 ratio cartridges they insure a complete, on-ratio mix of PVC TrimWelder.
- EASY TO DISPENSE: Dispensable with a twist of the product. This easy motions ensures both control of the dispensed amount as well as accurate placement of the product for an easy finish.
- LOW INTERNAL VOLUME: These twist lock mixers have the lowest internal volume of any thorough mixer, creating much less waste. Sold in convenient packages of 24.
- COMPLETELY MIXES: Ensure a complete mix when adhesive is applied. This makes sure a complete, thorough mixture to ensure effective adhesion in all applications.
- EXTREME ADHESIVES: Extreme Adhesives, Inc. was founded in 1987 In the state of New Hampshire where they remain today. Our goal is to bring our technology into new markets and provide the professional builder and the DIY'er with high performance adhesives suitable for today's PVC and urethane trim.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 1.50 x 9.00 x 7.00 inches
See On Amazon #8
H.B. Fuller Hot Melt Insulating Glass Butyl Sealant HL5130149 CAH CV (18 Boxes) | One-Component Insulating Glass Sealant with Exceptional Adhesion to IG Glass and Spacer
Asin: B09568DLBB | Ean: 0723022010047 | UPC: 723022010047
Versitile Application: For Use With Manual Hot Melt Dispensing System. Use Eye Protection And Thermally Protective Clothing. Use In A Well-Ventilated Area And Do Not Exceed 450°F..
Safe Handling: It Is Highly Recommended To Read Our Safety Data Sheets Containing Health, Safe Handling, Storage, Disposal, And Other Safety Related Data. Please Also Refer To The Product Label For Additional Safety Considerations..
Proper Storage: Store In A Cool, Dry, Clean Place. Packaging Must Be Kept Sealed And Protected From Moisture. Product May Be Stored In This Manner For 24 Months From Date Of Manufacture..
Synthetic Rubber: Meets Astm E2190 And Cgsb 12 8 Standards. Excellent Moisture Vapor Resistance And Gas Retention. Recommended Application Temperature Of 365°F - 385°F (185°C - 196°C)..
Features
- EASY TO USE: One-component insulating glass sealant engineered for exceptional adhesion to IG glass and spacer as well as strong barrier properties.
- SYNTHETIC RUBBER: Meets ASTM E2190 and CGSB 12 8 Standards. Excellent moisture vapor resistance and gas retention. Recommended application temperature of 365 F - 385 F (185 C - 196 C).
- VERSITILE APPLICATION: For use with manual hot melt dispensing system. Use eye protection and thermally protective clothing. Use in a well-ventilated area and do not exceed 450 F.
- PROPER STORAGE: Store in a cool, dry, clean place. Packaging must be kept sealed and protected from moisture. Product may be stored in this manner for 24 months from date of manufacture.
- SAFE HANDLING: It is highly recommended to read our Safety Data Sheets containing health, safe handling, storage, disposal, and other safety related data. Please also refer to the product label for additional safety considerations.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 13.00 x 8.00 x 17.00 Inches | Weight: 50.00 pounds
See On Amazon #9
H.B. Fuller HL2053 Hot Melt Tape and Label Adhesive - Color: Light Amber | General Purpose Heat Activated Tape Glue | Subtle & Durable Temperature-Triggered Bonding
Asin: B098R8ZXY6 | Ean: 0723022020176 | UPC: 723022020176
High-Quality Adhesion: Hot Melt Material Provides Good Adhesion On A Wide Range Of Substrates For A Clean-Looking Point Of Attachment And Subtle Or Even Indiscernible Seam.
Strong & Durable: Made With Industry-Leading Hb Fuller Engineering And Ingredients, The Hot Melt Products Employ Superior Bond And Durability For Every Job.
Easy Heat Application: Simply Heat The Hot Melt Adhesion Element To The Easy-To-Reach 325 Degrees Fahrenheit And Apply To Appropriate Project Components.
Extreme Usability: Outstanding Performance In Industrial Adhesion With Typical Uses Including: Corrugate Labeling, Laser Print Labels, Film And Paper Labeling.
Features
- WIDE-RANGE UTILIZATION: Multi-purpose permanent adhesive for tape and labelling in a large scope of diverse commercial applications, eliminating the need for multiple products
- EXTREME USABILITY: Outstanding performance in industrial adhesion with typical uses including: corrugate labeling, laser print labels, film and paper labeling
- HIGH-QUALITY ADHESION: Hot melt material provides good adhesion on a wide range of substrates for a clean-looking point of attachment and subtle or even indiscernible seam
- EASY HEAT APPLICATION: Simply heat the hot melt adhesion element to the easy-to-reach 325 degrees Fahrenheit and apply to appropriate project components
- STRONG & DURABLE: Made with industry-leading HB Fuller engineering and ingredients, the hot melt products employ superior bond and durability for every job
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 8.50 x 12.75 x 15.50 Inches | Weight: 31.00 Pounds
See On Amazon #10
PVC TrimWelder 50 ML COX Manual Dispense Gun, Rigid Glass Reinforced Nylon Engineered Plastic, Lightweight and Powerful, Easy to Load and Secure for Confident Usage
Asin: B0BSB5W48L | Ean: 0850611002104 | UPC: 850611002104
Lightweight & Powerful: Lightweight, Tough, Rigid Glass Reinforced Nylon Plastic Ensures That Your Product Will Be Able To Survive The Harshest Bangs And Nicks That Come Along With Your Work..
Extreme Adhesives: Extreme Adhesives, Inc. Was Founded In 1987 In The State Of New Hampshire Where They Remain Today. Our Goal Is To Bring Our Technology Into New Markets And Provide The Professional Builder And The Diy'er With High Performance Adhesives Suitable For Today's Pvc And Urethane Trim..
Detail And Specifications: This Dispenser Is Designed For All 50 Ml Cartridges For Eased Convenience Of Use And Confidence In Those Facts..
Durable, Replaceable Parts: All Component Parts Are Replaceable. The Wear Compensating Mechanism And Case-Hardened Cast Steel Catch Plate Assures A Long Life..
Features
- EASY TO DISPENSE: Easily dispenses high and low viscosity adhesives with less user fatigue. Easy loading breach provides a secure cartridge fit. Take confidence in your cartridge staying firmly where it is for ease of use.
- DURABLE, REPLACEABLE PARTS: All component parts are replaceable. The wear compensating mechanism and case-hardened cast steel catch plate assures a long life.
- LIGHTWEIGHT & POWERFUL: Lightweight, tough, rigid glass reinforced nylon plastic ensures that your product will be able to survive the harshest bangs and nicks that come along with your work.
- DETAIL AND SPECIFICATIONS: This Dispenser is designed for all 50 mL cartridges for eased convenience of use and confidence in those facts.
- EXTREME ADHESIVES: Extreme Adhesives, Inc. was founded in 1987 In the state of New Hampshire where they remain today. Our goal is to bring our technology into new markets and provide the professional builder and the DIY'er with high performance adhesives suitable for today's PVC and urethane trim.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 3.00 x 7.50 x 4.00 Inches | Weight: 0.60 pounds
See On Amazon #11
H.B. Fuller Pressure Sensitive Hot Melt Container Labeling Adhesive PHL4880ZP | High Hot Tack Allows for Strong and Flexible Adhesion That Works with Metal Cans, Bottles and PET
Asin: B093JZWBBB | Ean: 0723022020152 | UPC: 723022020152
Versatile Adhesive: Designed To Work On Metal Cans And Both Carbonated And Non-Carbonated Beverage Pet Bottles, Which Helps You Reduce Skus In Plants That Manufacture A Wide Range Of Products..
Strong & Flexible: New And Interesting Pet Bottle Designs Typically Have Less Surface Area For Adhesive Application And Are Becoming Thinner. H.B. Fuller Psa Hot Melt Glue Is Flexible Enough To Stay On The Bottle Through Transportation And Consumption Even With Difficult-To-Bond Labels..
Efficient & Worry-Free: High Hot Tack And Flexibility Provides A Strong Bond To Flex With Your Pet Bottles While Reducing Usage, Compared To Most Hot Melt Labeling Adhesives, By As Much As 51%..
Operation Excellence: The Low Viscosity Properties And Formulated Chemistry Enables Reduced Cleaning And Ease Of Implementation On Equipment, Which Translates To Increased Efficiencies By Reducing Costly Manufacturing Downtime..
Features
- PROTECT YOUR BRAND: Worry-free and versatile pressure sensitive glue for your toughest labeling needs ensures your label adheres to the bottle throughout the product lifecycle with reduction in flagging. Container labels are critical for brand recognition and brand recognition comes from consistently applied labels that stay on through the entire product life cycle.
- OPERATION EXCELLENCE: The low viscosity properties and formulated chemistry enables reduced cleaning and ease of implementation on equipment, which translates to increased efficiencies by reducing costly manufacturing downtime.
- VERSATILE ADHESIVE: Designed to work on metal cans and both carbonated and non-carbonated beverage PET bottles, which helps you reduce SKUs in plants that manufacture a wide range of products.
- EFFICIENT & WORRY-FREE: High hot tack and flexibility provides a strong bond to flex with your PET bottles while reducing usage, compared to most hot melt labeling adhesives, by as much as 51%.
- STRONG & FLEXIBLE: New and interesting PET bottle designs typically have less surface area for adhesive application and are becoming thinner. H.B. Fuller PSA hot melt glue is flexible enough to stay on the bottle through transportation and consumption even with difficult-to-bond labels.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 8.50 x 15.38 x 12.75 Inches | Weight: 31.00 pounds
See On Amazon #12
H.B. Fuller HL3163 Book Binding Spine Adhesive | Ethylene-Vinyl Acetate Hot Melt Adhesive | Great for One-Shot Softcover Books and Magazines | 17.24 KG of Pellet Adhesives
Asin: B0BNP767JS | Ean: 0723022004169 | UPC: 723022004169
Fast Cure Time: H.B. Fuller's Book Binding Spine Glue Has A Medium-To-Fast Set Time Making Print-On-Demand Productions Faster In Their Production Time While Creating Quality Products..
Economic Advantages: Our Eva Hot Melt Book Binding Adhesive Is Cost Effective, Easy To Use, And Easy To Store. These Economical Advantages Are Sure To Elevate Your Print-On-Demand Book Binding Production..
Versatile: This Book Binding Spine Glue Is Versatile And Can Be Used With A Large Amount Of Book Binding Paper Stocks. It's Great For Use With Soft Cover Books And Magazines!.
Heat Resistant: These Eva Hot Melt Adhesives Come In Pellet Form And Offer Excellent Heat Resistance. Great Heat Resistance Makes It Easier To Control When And Where You Activate The Adhesive And Makes It Easier To Control..
Features
- PRINT-ON-DEMAND: This Ethylene Vinyl Acetate Hot Melt Adhesive is great for one-shot book binding applications. This adhesive is great for print-on-demand book binding productions with it's fast cure time and extended flexibility.
- HEAT RESISTANT: These EVA Hot Melt Adhesives come in pellet form and offer excellent heat resistance. Great heat resistance makes it easier to control when and where you activate the adhesive and makes it easier to control.
- FAST CURE TIME: H.B. Fuller's Book Binding Spine Glue has a medium-to-fast set time making print-on-demand productions faster in their production time while creating quality products.
- VERSATILE: This Book Binding Spine Glue is versatile and can be used with a large amount of book binding paper stocks. It's great for use with soft cover books and magazines!
- ECONOMIC ADVANTAGES: Our EVA Hot Melt Book Binding Adhesive is cost effective, easy to use, and easy to store. These economical advantages are sure to elevate your print-on-demand book binding production.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 9.63 x 12.69 x 17.19 Inches | Weight: 38.00 pounds
See On Amazon #13
PVC TrimWelder Slow Cure 50 ML Cartridge and Dispensing Gun with 2 Included Qwik Mixers, Will not Foam, Run or Drip, Ready in 90 to 120 Minutes, Medium Viscosity and Solvent-Free
Asin: B0CJMW6QF1
Paintable & Able To Be Sanded: Pvc Slowcure Is A Solvent Free Formulation That Is Both Paintable And Sandable. Pvc Slowcure Can Fill Nail Holes And Gaps Up To 3/8"..
Dispensing Gun Included: Easily Dispenses High And Low Viscosity Adhesives With Less User Fatigue. Easy Loading Breach Provides A Secure Cartridge Fit. Take Confidence In Your Cartridge Staying Firmly Where It Is For Ease Of Use..
Color-Matching: Pvc Trimwelder Slowcure Is Color Matched To Pvc Boards. Pvc Slowcure Also Has A Creamy Consistency, So It Won't Foam Or Drip..
Strong & Tough: Pvc Trimwelder Slowcure Provides Strong, Tough Bonds To All Forms Of Pvc, Metals As Well As Nylons, Polystyrenes, And Fiberglass. Pvc Slowcure Can Also Withstand Thermal Cycling..
Features
- EXTENDED OPEN TIME: PVC SlowCure adhesive has an open time of 20-30 minutes. This allows for an extended open time for larger applications with handling strength in 90 to 120 minutes.
- STRONG & TOUGH: PVC TrimWelder SlowCure provides strong, tough bonds to all forms of PVC, metals as well as nylons, polystyrenes, and fiberglass. PVC SlowCure can also withstand thermal cycling.
- PAINTABLE & ABLE TO BE SANDED: PVC SlowCure is a solvent free formulation that is both paintable and sandable. PVC SlowCure can fill nail holes and gaps up to 3/8.
- COLOR-MATCHING: PVC TrimWelder SlowCure is color matched to PVC boards. PVC SlowCure also has a creamy consistency, so it won't foam or drip.
- DISPENSING GUN INCLUDED: Easily dispenses high and low viscosity adhesives with less user fatigue. Easy loading breach provides a secure cartridge fit. Take confidence in your cartridge staying firmly where it is for ease of use.
- See more on Amazon...
Brand: H.B. Fuller
See On Amazon #14
PVC TrimWelder Slow Cure 220 ML Cartridge and Dispensing Gun with 2 Included Qwik Mixers, Will not Foam, Run or Drip, Ready in 90 to 120 Minutes, Medium Viscosity and Solvent-Free
Asin: B0CJMZG2QD
Paintable & Able To Be Sanded: Pvc Slowcure Is A Solvent Free Formulation That Is Both Paintable And Sandable. Pvc Slowcure Can Fill Nail Holes And Gaps Up To 3/8"..
Dispensing Gun Included Easily Dispenses High And Low Viscosity Adhesives With Less User Fatigue. Easy Loading Breach Provides A Secure Cartridge Fit. Take Confidence In Your Cartridge Staying Firmly Where It Is For Ease Of Use..
Color-Matching: Pvc Trimwelder Slowcure Is Color Matched To Pvc Boards. Pvc Slowcure Also Has A Creamy Consistency, So It Won't Foam Or Drip..
Strong & Tough: Pvc Trimwelder Slowcure Provides Strong, Tough Bonds To All Forms Of Pvc, Metals As Well As Nylons, Polystyrenes, And Fiberglass. Pvc Slowcure Can Also Withstand Thermal Cycling..
Features
- EXTENDED OPEN TIME: PVC SlowCure adhesive has an open time of 20-30 minutes. This allows for an extended open time for larger applications with handling strength in 90 to 120 minutes.
- STRONG & TOUGH: PVC TrimWelder SlowCure provides strong, tough bonds to all forms of PVC, metals as well as nylons, polystyrenes, and fiberglass. PVC SlowCure can also withstand thermal cycling.
- PAINTABLE & ABLE TO BE SANDED: PVC SlowCure is a solvent free formulation that is both paintable and sandable. PVC SlowCure can fill nail holes and gaps up to 3/8.
- COLOR-MATCHING: PVC TrimWelder SlowCure is color matched to PVC boards. PVC SlowCure also has a creamy consistency, so it won't foam or drip.
- DISPENSING GUN INCLUDED Easily dispenses high and low viscosity adhesives with less user fatigue. Easy loading breach provides a secure cartridge fit. Take confidence in your cartridge staying firmly where it is for ease of use.
- See more on Amazon...
Brand: H.B. Fuller
See On Amazon #15
Childers CP-70 Chil-Joint Tube
Asin: B0BV81YN7H | Ean: 0613497351175 | UPC: 613497351175
Mas Certified Green.
It Forms A Tough Protective Surface Where Exposed To The Air, Which Helps Protect The Underlying Sealant.
Chil-Joint Cp-70 Sealant Requires No Mixing Oradditives.
It Will Not Shrink Or Pull Away From Surfaces, And Even At Elevated Temperatures (Although It May Discolor And Harden) It Still Forms A Tight Weather Bond Under Most.
Features
- It has a low level of volatiles, which would cause shrinking when it is used to seal the joints of impermeable materials
- It will not shrink or pull away from surfaces, and even at elevated temperatures (although it may discolor and harden) it still forms a tight weather bond under most
- MAS Certified Green
- CHIL-JOINT CP-70 sealant requires no mixing oradditives
- It forms a tough protective surface where exposed to the air, which helps protect the underlying sealant
- See more on Amazon...
Brand: BRB Products | Manufacturer: H.B. Fuller
See On Amazon #16
H.B. Fuller Swift Stick 9226 Clear White 10" Long 7/16" Diameter Glue Sticks, 425/25 lb Box, Premium Grade Hot Melt Adhesive for Assembly, Crafts and Packaging
Asin: B09JRCG154 | Ean: 0723022020206 | UPC: 723022020206
Typical Applications: Our Glue Sticks Are Intended For Use In Assembly Applications, Packaging, And Art And Crafts. Also Can Be Used For Wood-To-Wood Applications..
Includes ~425 Sticks: Each 25 Pound Box Contains Approximately Four Hundred And Twenty-Five, 10 Inch Long, 7/16" Diameter Glue Sticks. Application Temperature: 350°F – 375°F. Store In Clean And Dry Conditions Above 20°F And Below 100°F..
Suitable Substrates: Uncoated, Clay Coated, Sbs, Sus And Similar Uncoated And Lightly Coated Materials And A Wide Range Of Other Substrates. For Use With An Industrial 1/2" Hot Glue Gun..
Wide Range Of Applications: Bonding Performance On Carton Stock, Corrugated Board, And Wood Plus A Broad Range Of Substrates With A Wide Temperature Range From Freezer To Moderate Temperature Conditions..
Features
- PREMIUM GRADE: Swift stick 9226 is a premium hot melt glue stick with a long open time, adheres to a wide variety of substrates, and is clear in color to preserve a finished goods aesthetic.
- WIDE RANGE OF APPLICATIONS: Bonding performance on carton stock, corrugated board, and wood plus a broad range of substrates with a wide temperature range from freezer to moderate temperature conditions.
- TYPICAL APPLICATIONS: Our glue sticks are intended for use in assembly applications, packaging, and art and crafts. Also can be used for wood-to-wood applications.
- SUITABLE SUBSTRATES: Uncoated, clay coated, SBS, SUS and similar uncoated and lightly coated materials and a wide range of other substrates. For use with an industrial 1/2 hot glue gun.
- INCLUDES ~425 STICKS: Each 25 pound box contains approximately four hundred and twenty-five, 10 inch long, 7/16 diameter glue sticks. Application temperature: 350 F 375 F. Store in clean and dry conditions above 20 F and below 100 F.
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 6.00 x 15.00 x 10.00 Inches | Weight: 25.00 pounds
See On Amazon #17
H.B. Fuller ADCOBOND A -3 Double Sided Tape 0.045"x0.5"x108LF (18 Rolls) | Very High Bond Acrylic Tape | Waterproof, Uniform, High-tack, Acrylic Adhesive Bonds to Most Clean, Dry, Oil-Free Substrates
Asin: B09BHDJP77 | Ean: 0723022010139 | UPC: 723022010139
Moisture Resistant: This Tape Offers Numerous Advantages Including A Waterproof Bond, Ease Of Application, And The Ability To Withstand Thermal Movement..
Technical Specifications: Elongation - 500%, Dynamic Shear - 620 Kpa (90 Psi), Application Temperature Range - 10°C To 38°C (50°F To 100°F).
Suitable Substrates: Acrylic Adhesive Is Suitable For Bonding A Variety Of Substrates, Including Many Plastic Composites, Sealed Wood, And Metals. Low Surface Energy Materials Such As Polyethylene, Polypropylene, Silicones And Ptfe Can Be Difficult To Bond To..
Tensile Strength: 2200 Kpa - The Tape Possesses A Uniform, High-Tack, Acrylic Adhesive On Both Surfaces With An Integral Core Of Solid Acrylic Polymer And Will Bond To Most Clean, Dry, Oil-Free Substrates..
Features
- DOUBLE SIDED ADCOBOND AT-3: Pressure sensitive, structural grade, solid acrylic tape system designed to provide a superior bond between a wide variety of substrates
- TENSILE STRENGTH: 2200 kPa - The tape possesses a uniform, high-tack, acrylic adhesive on both surfaces with an integral core of solid acrylic polymer and will bond to most clean, dry, oil-free substrates.
- MOISTURE RESISTANT: This tape offers numerous advantages including a waterproof bond, ease of application, and the ability to withstand thermal movement.
- SUITABLE SUBSTRATES: Acrylic adhesive is suitable for bonding a variety of substrates, including many plastic composites, sealed wood, and metals. Low surface energy materials such as polyethylene, polypropylene, silicones and PTFE can be difficult to bond to.
- TECHNICAL SPECIFICATIONS: Elongation - 500%, Dynamic Shear - 620 KPA (90 psi), Application Temperature Range - 10 C to 38 C (50 F to 100 F)
- See more on Amazon...
Brand: H.B. Fuller | Manufacturer: H.B. Fuller
Dimensions: 10.13 x 12.00 x 12.00 Inches | Weight: 27.00 pounds
See On Amazon