HIPICCO - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling from HIPICCO on Amazon
- HiPicco R188ZZ Deep Groove Ball Bearings, ID 1/4" x OD 1/2" x Width 3/16" Miniature Bearings, Double...
- HiPicco 6003-2RS Deep Groove Ball Bearings, ID 17mm x OD 35mm x Width 10mm Double Rubber Sealed Ball...
- HiPicco CF5 Rod End Bearing Heim Joints, 5/16 x 5/16-24 Right Hand Female Thread Heim Joint with Jam...
- HiPicco POSB8 Rod End Bearing, 2pcs 1/2-inch Bore Pre-Lubricated 1/2-20 Male Thread Right Hand Heim ...
- HiPicco Thrust Ball Bearings, 4pcs 51100 Plane Axial Ball Bearing 3-in-1, 10mm x 24mm x 9mm Chrome S...
- HiPicco PHSB8 Rod End Bearing 1/2 Inch Bore and 1/2-20 Right Hand Thread, Self-Lubricating Female He...
- HiPicco SA8T/K Rod End Bearing, 4pcs 8mm Bore Self Lubricating M8x1.25mm Metric Male Thread Right Ha...
- HiPicco M5 x 400mm Fully Threaded Rod & Studs, 304 Stainless Steel Right Hand Threads Rods, M5-0.8 T...
- HiPicco MR84-2RS Deep Groove Ball Bearings, ID 4mm x OD 8mm x Width 3mm Miniature Bearings, Double R...
- HiPicco 6801-2RS Deep Groove Ball Bearings, ID 12mm x OD 21mm x Width 5mm Double Rubber Sealed Ball ...
#1
HiPicco R188ZZ Deep Groove Ball Bearings, ID 1/4" x OD 1/2" x Width 3/16" Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 20pcs
Asin: B0C75H3GDS | Model: R188ZZ | PartNumber: R188ZZ
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance..
Application: Suitable For Motor, Toys, Model, Instruments And Meters, Electric Tools, Communications Equipment, Fitness Equipment And So On..
Advantage: Shield Seal On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Material: The Bearing Is Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Features
- Model: R188ZZ Bearings,(I.D.=1/4", O.D.=1/2", Thickness=3/16");
- Material: The bearing is made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance.
- Advantage: Shield seal on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Application: Suitable for motor, toys, model, instruments and meters, electric tools, communications equipment, fitness equipment and so on.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #2
HiPicco 6003-2RS Deep Groove Ball Bearings, ID 17mm x OD 35mm x Width 10mm Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Z2 Lever 2pcs
Asin: B0CH2VWZ9J | Model: 6003-2RS | PartNumber: 6003-2RS
Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Application: 6003-2Rs Are Used In A Range Of Applications Requiring Combined Radial And Axial Loads At High Speeds. These Applications Include Robotics, Hedge Clippers, Small Spindles, Finishing Sanders, Atvs, Buffers, Radial Drills, Chop Saws, Circular Saws, Miter Saws And Other Fields..
Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Rubber Sealed, Pre-Lubricated With Grease.
Features
- 6003-2RS Sealed Bearings,(I.D.=17mm, O.D.=35mm, Thickness=10mm);
- Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
- Made of chrome steel (GCr15), durability and resistance to under heavy loads
- Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Application: 6003-2RS are used in a range of applications requiring combined radial and axial loads at high speeds. These applications include Robotics, Hedge Clippers, Small Spindles, Finishing Sanders, ATVs, Buffers, Radial Drills, Chop Saws, Circular Saws, Miter Saws and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon #3
HiPicco CF5 Rod End Bearing Heim Joints, 5/16 x 5/16-24 Right Hand Female Thread Heim Joint with Jam Nuts 2pcs
Asin: B0C9Y6S5CP | Model: CF5 | PartNumber: CF5
Maximum Angular Misalignment: 11 Degree; 17.009Kn Static Load Capacity.
Application: Widely Used In Engineering Hydraulic Cylinders, Machinery, Cars, Motorcycles, Atvs, Ships, Power Tools, Automation Equipment, Cnc Equipment, And So On..
High Performance: High Precision, Large Load Rating, Low Noise, Anti-Corrosion, Tough, And Durable..
Material: The Body Is Made Of #45 Steel With Solid Forging; Hardened Bearing Steel Ball For Strength And Resistance To Wear And Corrosion..
Features
- Size: 5/16" Bore x 5/16-24 right-handed female thread ball joint, Jam Nut Included
- Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.
- Maximum Angular Misalignment: 11 Degree; 17.009KN Static Load Capacity
- High Performance: High precision, Large load rating, low noise, anti-corrosion, tough, and durable.
- Application: Widely used in engineering hydraulic cylinders, machinery, cars, motorcycles, ATVs, ships, power tools, automation equipment, CNC equipment, and so on.
- See more on Amazon...
Brand: HiPicco | Manufacturer: HiPicco
Dimensions: 0.51 x 4.72 x 2.36 inches
See On Amazon #4
HiPicco POSB8 Rod End Bearing, 2pcs 1/2-inch Bore Pre-Lubricated 1/2-20 Male Thread Right Hand Heim Joint with Jam Nuts
Asin: B0BL7LVTJ3 | Model: POSB8 | PartNumber: POSB8 | Ean: 0774034519110 | UPC: 774034519110
Capacity:19N Static Load Capacity, 15Kn Dynamic Load Capacity..
Application: Widely Used In Engineering Hydraulic Cylinders, Machinery, Power Tools, Automation Equipment, Cnc Equipment, And So On..
Feature: Pre-Lubricated And Large Load Rating, Low Noise, Corrosion Resistance And Wear Resistance, Unidirectional Lubricating Oil Valve, You Can Inject Butter Expediently..
Material: The Body Is Made Of #45 Steel With Solid Forging; Hardened Bearing Steel Ball For Strength And Resistance To Wear And Corrosion..
Features
- Size: 1/2" Bore and 1/2-20 right-handed male thread ball joint; Maximum Angular Misalignment: 9 Degree.
- Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.
- Capacity:19N Static Load Capacity, 15KN Dynamic Load Capacity.
- Feature: Pre-Lubricated and large load rating, low noise, corrosion resistance and wear resistance, unidirectional lubricating oil valve, you can inject butter expediently.
- Application: Widely used in engineering hydraulic cylinders, machinery, power tools, automation equipment, CNC equipment, and so on.
- See more on Amazon...
Brand: HiPicco | Manufacturer: HiPicco
Dimensions: 0.51 x 4.72 x 2.36 Inches
See On Amazon #5
HiPicco Thrust Ball Bearings, 4pcs 51100 Plane Axial Ball Bearing 3-in-1, 10mm x 24mm x 9mm Chrome Steel ABEC3 Single Row Roller
Asin: B0BY3FH2L5 | Model: 51100 | PartNumber: 51100
[Features] - The Size Is Standardized, Easy To Install And Disassemble, And Easy To Maintain; Low Friction Resistance, Low Power Consumption And High Mechanical Efficiency; High Precision, High Speed, Small Wear And Long Service Life..
[Application] - Thrust Ball Bearings, Composed Of Bearing Balls Supported In A Ring, Can Be Used In Low Thrust Applications Where There Is Little Axial Load, Such As Oven Turntable, Jack, Pump, Rotating Applications, Machine Tools, Automobiles, Etc..
[Capability] - Dynamic Load Rating (Cr): 10Kn; Static Load Rating (Cor): 14Kn; Limiting Speed (Grease): 6500Rpm, Designed For Low Speed Operation And Axial Loads Only.
[Material] - Made Of Chrome Steel(Aisi 52100), Have Great Wear-Resistant, High Temperature Resistance And High Hardness; Brass Cage.
Features
- [SIZE] - Bore Diameter=10mm, Outer Diameter=24mm, Thickness=9mm
- [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage
- [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.
- [CAPABILITY] - Dynamic Load Rating (Cr): 10kN; Static Load Rating (Cor): 14kN; Limiting Speed (Grease): 6500rpm, designed for low speed operation and axial loads only
- [APPLICATION] - Thrust ball bearings, composed of bearing balls supported in a ring, can be used in low thrust applications where there is little axial load, such as oven turntable, jack, pump, rotating applications, machine tools, automobiles, etc.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #6
HiPicco PHSB8 Rod End Bearing 1/2 Inch Bore and 1/2-20 Right Hand Thread, Self-Lubricating Female Heim Joint Rod Ends,Includes Jam Nuts 2pcs
Asin: B0BL7M5GWC | Model: PHSB8 | PartNumber: PHSB8 | Ean: 0774034519196 | UPC: 774034519196
Capacity:19N Static Load Capacity, 15Kn Dynamic Load Capacity..
Application: Widely Used In Engineering Hydraulic Cylinders, Machinery, Power Tools, Automation Equipment, Cnc Equipment, And Other Applications That Require Reliable And Flexible Motion Control..
Feature: Self-Aligning Large Load Rating, Low Noise, Corrosion Resistance And Wear Resistance, Unidirectional Lubricating Oil Valve,The Bearing Steel Ball And The Copper Ring Are Locked And Squeezed So That They Will Not Fall Off..
Material And Finish: The Body Is Made Of #45 Steel With Solid Forging; Hardened Bearing Steel Ball For Strength And Resistance To Wear And Corrosion; Inner Ring Spherical Surface Features Chromium Plating, Rod End Body Surface Is Zinc-Plated..
Features
- Size: 1/2" Bore and 1/2-20 right-handed female thread ball joint - for smooth and flexible motion in mechanical assemblies; Maximum Angular Misalignment: 9 Degree.
- Material and Finish: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion; Inner ring spherical surface features chromium plating, rod end body surface is zinc-plated.
- Capacity:19N Static Load Capacity, 15KN Dynamic Load Capacity.
- Feature: Self-aligning large load rating, low noise, corrosion resistance and wear resistance, unidirectional lubricating oil valve,The bearing steel ball and the copper ring are locked and squeezed so that they will not fall off.
- Application: Widely used in engineering hydraulic cylinders, machinery, power tools, automation equipment, CNC equipment, and other applications that require reliable and flexible motion control.
- See more on Amazon...
Brand: HiPicco | Manufacturer: HiPicco
Dimensions: 0.51 x 4.72 x 2.36 Inches | Weight: 0.69 pounds
See On Amazon #7
HiPicco SA8T/K Rod End Bearing, 4pcs 8mm Bore Self Lubricating M8x1.25mm Metric Male Thread Right Hand Heim Joint with Jam Nuts
Asin: B0BL7NFMGP | Model: SA8T/K | PartNumber: SA8T/K | Ean: 0774034519271 | UPC: 774034519271
Capacity: 12.9Kn Static Load Capacity, 11.6Kn Dynamic Load Capacity..
Application: Widely Used In Engineering Hydraulic Cylinders, Machinery, Power Tools, Automation Equipment, Cnc Equipment, And So On..
Feature: Self-Aligning And Large Load Rating, Low Noise, Corrosion Resistance And Wear Resistance..
Material: The Body Is Made Of Carbon Steel With White Zinc Plated; Hardened Chrome-Plated Steel Ball For Strength And Resistance To Wear And Corrosion..
Features
- Size: 8mm Bore and M5x1.25 right-handed male thread ball joint; Maximum Angular Misalignment: 14 Degree.
- Material: The body is made of carbon steel with white zinc plated; hardened chrome-plated steel ball for strength and resistance to wear and corrosion.
- Capacity: 12.9KN Static Load Capacity, 11.6KN Dynamic Load Capacity.
- Feature: Self-aligning and large load rating, low noise, corrosion resistance and wear resistance.
- Application: Widely used in engineering hydraulic cylinders, machinery, power tools, automation equipment, CNC equipment, and so on.
- See more on Amazon...
Brand: HiPicco | Manufacturer: HiPicco
Dimensions: 0.51 x 4.72 x 2.36 Inches | Weight: 0.22 pounds
See On Amazon #8
HiPicco M5 x 400mm Fully Threaded Rod & Studs, 304 Stainless Steel Right Hand Threads Rods, M5-0.8 Thread Pitch for Anchor Bolts, Clamps, Hangers and U-Bolts 4 Pack with Nuts
Asin: B0C94Y8JS1 | Model: M5 x 400mm | PartNumber: M5 x 400mm
【Performance】The Steel Threaded Rod Has Good Toughness, Is Easy To Shape Without Cracks. It Can Make The Fasteners That Screw Into Threaded Nuts Or Tapped Holes, Allowing For The Assembly Of Components..
【What You Get】4Pcs X Stainless Steel Fully Threaded Rod. If You Have Any Questions About This Item, Please Feel Free To Contact Us!.
【Applications】Suitable For Assembly Fastening, Screw Into Threaded Nuts Or Tapped Holes. Widely Used For Anchor Bolts, Clamps, Hangers And U-Bolts And Many More Projects Where A Metal Rod With Continuous Threading Or No Head Or Fashioned Tip Is Required.
【Material】Threaded Rod Made Of 304 Stainless Steel, Provides Great Corrosion Resistance And Antirust Ability For Long Service Life..
Features
- Size Thread Dia.: M5; Thread Pitch: 0.8mm; Total Length: 400mm / 15.75"; Thread Style: Right Hand; Can be drilled, cut, heated and shaped.
- Material Threaded rod made of 304 stainless steel, provides great corrosion resistance and antirust ability for long service life.
- Performance The steel threaded rod has good toughness, is easy to shape without cracks. It can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components.
- Applications Suitable for assembly fastening, screw into threaded nuts or tapped holes. Widely used for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required
- What you get 4pcs x Stainless Steel Fully Threaded Rod. If you have any questions about this item, please feel free to contact us!
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
Dimensions: 0.20 x 15.75 x 0.20 Inches
See On Amazon #9
HiPicco MR84-2RS Deep Groove Ball Bearings, ID 4mm x OD 8mm x Width 3mm Miniature Bearings, Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Blue Z2 Lever 10pcs
Asin: B0C74V3FF2 | Model: MR84-2RS | PartNumber: MR84-2RS
Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Apply For Electric Motors To Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Lab Equipment, Jewelry, Hand Piece, Radio Controlled Models, Anemometers, Miniature Gearboxes, Small Motors And Other Fields..
Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Rubber Sealed, Pre-Lubricated With Grease.
Features
- MR84-2RS Blue Sealed Bearings,(I.D.=4mm, O.D.=8mm, Thickness=3mm);
- Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
- Made of chrome steel (GCr15), durability and resistance to under heavy loads
- Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Apply for electric motors to robotics, RC cars, RC helicopters, RC planes, RC trucks, lab equipment, jewelry, hand piece, radio controlled models, anemometers, miniature gearboxes, small motors and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #10
HiPicco 6801-2RS Deep Groove Ball Bearings, ID 12mm x OD 21mm x Width 5mm Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Z2 Lever 10pcs
Asin: B0C74WCSR9 | Model: 6801-2RS | PartNumber: 6801-2RS
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance..
Application: Suitable For Motor, Toys, Model, Instruments And Meters, Electric Tools, Printing Machines, Clutches, Drives, Gearboxes And So On..
Advantage: Rubber Sealed On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Material: The Bearing Is Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Features
- Model: 6801-2RS Sealed Bearings,(I.D.=12mm, O.D.=21mm, Thickness=5mm);
- Material: The bearing is made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance.
- Advantage: Rubber sealed on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Application: Suitable for motor, toys, model, instruments and meters, electric tools, printing machines, clutches, drives, gearboxes and so on.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #11
HiPicco R14-2RS Deep Groove Ball Bearings, ID 7/8" x OD 1-7/8" x Width 1/2" Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Z2 Lever 10pcs
Asin: B0C74X9DCQ | Model: R14-2RS | PartNumber: R14-2RS
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance..
Application: Suitable For Electric Motors To Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Printers,Photocopier, Fax Machines, Radio Controlled Models, Anemometers, Miniature Gearboxes, Small Motors, Cnc Machinery And Other Fields..
Advantage: Rubber Sealed On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Material: The Bearing Is Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Features
- Model: R14-2RS Sealed Bearings,(I.D.=7/8", O.D.=1-7/8", Thickness=1/2");
- Material: The bearing is made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance.
- Advantage: Rubber sealed on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Application: Suitable for electric motors to robotics, RC cars, RC helicopters, RC planes, RC trucks, printers,Photocopier, Fax machines, radio controlled models, anemometers, miniature gearboxes, small motors, CNC machinery and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #12
HiPicco 6704-2RS Deep Groove Ball Bearings, ID 20mm x OD 27mm x Width 4mm Double Rubber Sealed Ball Z2 Lever Bearing Pre-Lubricated Chrome Steel Z2 Lever 10pcs
Asin: B0C74SLLHY | Model: 6704-2RS | PartNumber: 6704-2RS
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Apply For Scanning Equipment, Electric Tools, Pressure-Regulating Systems, Antenna And Sun Protection Systems, Model, Speed Reducers, Radar Equipment, Optical Equipment, Slip Ring Assemblies And Other Fields..
Advantage: Rubber Sealed On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Material: The Bearing Is Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Features
- Model: 6704-2RS Sealed Bearings,(I.D.=20mm, O.D.=27mm, Thickness=4mm);
- Material: The bearing is made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Advantage: Rubber sealed on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Apply for scanning equipment, electric tools, pressure-regulating systems, antenna and sun protection systems, model, speed reducers, radar equipment, optical equipment, slip ring assemblies and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #13
HiPicco 1605-2RS Deep Groove Ball Bearings, ID 5/16" x OD 29/32" x Width 5/16" Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 10pcs
Asin: B0CH339KQ9 | Model: 1605-2RS | PartNumber: 1605-2RS
Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Widely Used In Clutches And Cars, Electric Motors, Compressors, Pumps, Automotive, Conveyors, Belt Drives, Automotive Starters, Medium-Duty Industrial Applications, Among Others..
Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Rubber Sealed, Pre-Lubricated With Grease.
Features
- 1605-2RS Sealed Bearings,(I.D.=5/16", O.D.=29/32", Thickness=5/16");
- Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
- Made of chrome steel (GCr15), durability and resistance to under heavy loads
- Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Widely used in Clutches and Cars, Electric Motors, Compressors, Pumps, Automotive, Conveyors, Belt Drives, Automotive Starters, Medium-duty Industrial Applications, among others.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon #14
HiPicco Linear Ball Bearings, LM12LUU 12mm Bore Longer Linear Motion Bushing Double Side Rubber Sealed Rod Liner Shaft Parts for CNC Machine 3D Printer 4 Pack
Asin: B0BR2GWJQH | Model: LM12LUU | PartNumber: LM12LUU
Usage：Linear Bearings Are Part Of Linear Motion Systems, Often Used In Conjunction With Cylindrical Shafts Or Guideways.
Applications: Mechanical Slides, 2-Axis And 3-Axis Tables, Linear Tables, 3D Printers, Cnc Machines, Electronic Equipment, Food Machinery, Packaging Machinery, Etc..
Features: Nickel Plating Enhances Corrosion Resistance And Durability. These Linear Bearings With Nickel-Plated Surface Treatment Can Operate Under Corrosive Or High-Temperature Conditions.
Double Sealed Design: The Slide Bearing Are Double Sealed, So As To Avoid Contaminants Entering And Save Lubricant..
Features
- SIZE Model: LM12LUU, Bore Diamter (dr): 12mm, Outer Diameter (D): 21mm, Total Length (L): 57mm.
- DOUBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant.
- USAGE Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways
- FEATURES: Nickel plating enhances corrosion resistance and durability. These linear bearings with Nickel-Plated surface treatment can operate under corrosive or high-temperature conditions
- APPLICATIONS: Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, CNC machines, electronic equipment, food machinery, packaging machinery, etc.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #15
HiPicco 6900ZZ Deep Groove Bearings, ID 10mm x OD 22mm x Width 6mm Double Metal Shielded Ball Bearings, Pre-Lubricated (GCr15) Chrome Steel 4pcs
Asin: B0CRLDJVX3 | Model: 6900ZZ | PartNumber: 6900ZZ
Material: Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Application: 6900-Zz Thin High Speed Light Ball Bearings Are Used In Aerospace Equipment, Cameras, Optical Equipment, Industrial Robots, Rotary Encoders, Stepping Motors, Laser Engravers, Light-Duty Industrial Manufacturing And Other High Speed Applications..
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Advantage: Metal Shielded On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Features
- Model: 6900ZZ Bearings,(I.D.=10mm, O.D.=22mm, Thickness=6mm);
- Advantage: Metal Shielded on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Material: Made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Application: 6900-ZZ Thin High Speed Light Ball Bearings are used in Aerospace Equipment, Cameras, Optical Equipment, Industrial Robots, Rotary Encoders, Stepping Motors, Laser Engravers, Light-duty Industrial Manufacturing and other High Speed Applications.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon #16
HiPicco AXK6590 2AS Thrust Needle Roller Bearings with Washers 2pcs 65 Bore 90 OD 3mm Width, GCr15 Hardness
Asin: B0BZJSZH5D | Model: AXK6590+2AS | PartNumber: AXK6590+2AS
[Features] - The Size Is Standardized, Easy To Install And Disassemble, And Easy To Maintain; Low Friction Resistance, Low Power Consumption And High Mechanical Efficiency; High Precision, High Speed, Small Wear And Long Service Life..
[Application] - Needle Roller Thrust Bearings, Composed Of Bearing Balls Supported In A Ring, Can Be Used In Thrust Applications Where There Is Axial Load, Ranging From Agricultural Machinery To Conveying Equipment, Robots, Elevators, Rolling Mills, Rudder Shafts And Aggregate Crushers..
[Capability] - Dynamic Load Rating (Cr): 45.8Kn; Static Load Rating (Cor): 254.6Kn; Limiting Speed (Grease): 3000Rpm, Designed For Accommodate Axial Loads In One Direction Only.
[Material] - Needle Roller Thrust Bearings Made Of Chrome Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: AXK6590 (I.D.=65, O.D.=90, Bearing Thickness=3mm,); Washer Model: AS6590
- [MATERIAL] - Needle roller thrust bearings made of chrome steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.
- [CAPABILITY] - Dynamic Load Rating (Cr): 45.8kN; Static Load Rating (Cor): 254.6kN; Limiting Speed (Grease): 3000RPM, designed for accommodate axial loads in one direction only
- [APPLICATION] - Needle Roller Thrust Bearings, composed of bearing balls supported in a ring, can be used in thrust applications where there is axial load, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #17
HiPicco POSB6L Rod End Bearing, 2pcs 3/8-inch Bore Pre-Lubricated 3/8-24 Male Thread Left Hand Heim Joint
Asin: B0C4JDQ35H | Model: POSB6L | PartNumber: POSB6L
Capacity: 10Kn Static Load Capacity, 9.4Kn Dynamic Load Capacity..
Application: Widely Used In Engineering Hydraulic Cylinders, Machinery, Power Tools, Automation Equipment, Cnc Equipment, And So On..
Feature: Pre-Lubricated And Large Load Rating, Low Noise, Corrosion Resistance And Wear Resistance, Unidirectional Lubricating Oil Valve, You Can Inject Butter Expediently..
Material: The Body Is Made Of #45 Steel With Solid Forging; Hardened Bearing Steel Ball For Strength And Resistance To Wear And Corrosion..
Features
- Size: 3/8" Bore and 3/8-24 left-handed male thread ball joint; Maximum Angular Misalignment: 9 Degree.
- Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.
- Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.
- Feature: Pre-Lubricated and large load rating, low noise, corrosion resistance and wear resistance, unidirectional lubricating oil valve, you can inject butter expediently.
- Application: Widely used in engineering hydraulic cylinders, machinery, power tools, automation equipment, CNC equipment, and so on.
- See more on Amazon...
Brand: HiPicco | Manufacturer: HiPicco
Dimensions: 0.51 x 4.72 x 2.36 Inches
See On Amazon #18
HiPicco Ball Head Joint Rod End Bearing, 4pcs M6 Right Thread Ball Socket Universal Joints Carbon Steel Angle Ball Joint Fitting for Automotive, Hinged Door, Cupboard
Asin: B0BK2858Q5 | Model: M6 | PartNumber: M6 | Ean: 0774388161423 | UPC: 774388161423
Advantage: Circle Swing Agilely Without Any Block; Self-Lubricated Ball Socket, Low Noise, And Durable..
Package: 4Pcs X M6 X 1.0Mm Right Hand Thread Ball Head Joint Rod End Bearing.
Application : Widely Used For Automotive Ball Head Connecting Rod Accessories Gas Spring, Horizontally Hinged Door, Cupboard, Etc..
Material : Made Of Carbon Steel And Zinc Plated , High Hardness, And Great Wear Resistance, Showing Stable Performance And Lasting Service Life.
Features
- Thread Type: Right Hand thread, M6 Thread Dia, 1mm Pitch.
- Material : Made of carbon steel and zinc plated , high hardness, and great wear resistance, showing stable performance and lasting service life
- Advantage: Circle swing agilely without any block; Self-lubricated ball socket, low noise, and durable.
- Application : Widely used for automotive ball head connecting rod accessories gas spring, horizontally hinged door, cupboard, etc.
- Package: 4pcs x M6 x 1.0mm Right hand thread ball head joint rod end bearing
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HIPICCO
Dimensions: 0.51 x 4.72 x 2.36 Inches
See On Amazon #19
HiPicco 6901-2RS Deep Groove Bearings, ID 12mm x OD 24mm x Width 6mm Double Rubber Sealed Ball Bearings, Pre-Lubricated (GCr15) Chrome Steel 10pcs
Asin: B0CRLFN14R | Model: 6901-2RS | PartNumber: 6901-2RS
Material: Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Application: 6901-2Rs Thin High Speed Light Duty Ball Bearings Are Used In Aerospace Equipment, Cameras, Optical Equipment, Industrial Robots, Rotary Encoders, Stepping Motors, Laser Engravers, Light-Duty Industrial Manufacturing And Other High Speed Applications..
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Advantage: Rubber Sealed On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Features
- Model: 6901-2RS Bearings,(I.D.=12mm, O.D.=24mm, Thickness=6mm);
- Advantage: Rubber sealed on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Material: Made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Application: 6901-2RS Thin High Speed Light Duty Ball Bearings are used in Aerospace Equipment, Cameras, Optical Equipment, Industrial Robots, Rotary Encoders, Stepping Motors, Laser Engravers, Light-duty Industrial Manufacturing and other High Speed Applications.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon #20
HiPicco M3 x 150mm Fully Threaded Rod & Studs, 304 Stainless Steel Right Hand Threads Rods, M3-0.5 Thread Pitch for Anchor Bolts, Clamps, Hangers and U-Bolts 10pcs
Asin: B0C94WZVZ2 | Model: M3 x 150mm | PartNumber: M3 x 150mm
【Performance】The Steel Threaded Rod Has Good Toughness, Is Easy To Shape Without Cracks. It Can Make The Fasteners That Screw Into Threaded Nuts Or Tapped Holes, Allowing For The Assembly Of Components..
【What You Get】10Pcs X Stainless Steel Fully Threaded Rod. If You Have Any Questions About This Item, Please Feel Free To Contact Us!.
【Applications】Suitable For Assembly Fastening, Screw Into Threaded Nuts Or Tapped Holes. Widely Used For Anchor Bolts, Clamps, Hangers And U-Bolts And Many More Projects Where A Metal Rod With Continuous Threading Or No Head Or Fashioned Tip Is Required.
【Material】Threaded Rod Made Of 304 Stainless Steel, Provides Great Corrosion Resistance And Antirust Ability For Long Service Life..
Features
- Size Thread Dia.: M3; Thread Pitch: 0.5mm; Total Length: 150mm / 5.91"; Thread Style: Right Hand; Can be drilled, cut, heated and shaped.
- Material Threaded rod made of 304 stainless steel, provides great corrosion resistance and antirust ability for long service life.
- Performance The steel threaded rod has good toughness, is easy to shape without cracks. It can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components.
- Applications Suitable for assembly fastening, screw into threaded nuts or tapped holes. Widely used for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required
- What you get 10pcs x Stainless Steel Fully Threaded Rod. If you have any questions about this item, please feel free to contact us!
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
Dimensions: 0.12 x 5.91 x 0.12 Inches
See On Amazon #21
HiPicco R3ZZ Deep Groove Ball Bearings, ID 3/16" x OD 1/2" x Width 10/51" Double Shielded Ball Bearing Pre-Lubricated Chrome Steel Z2 Lever 10pcs
Asin: B0C74WTQ79 | Model: R3ZZ | PartNumber: R3ZZ
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance..
Application: Suitable For Electric Motors To Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Lab Equipment, Jewelry, Hand Piece, Radio Controlled Models, Anemometers, Miniature Gearboxes, Small Motors, Electric Fans, Automotives And Other Fields..
Advantage: Shield Seal On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Material: The Bearing Is Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Features
- Model: R3ZZ Bearings,(I.D.=3/16", O.D.=1/2", Thickness=10/51");
- Material: The bearing is made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance.
- Advantage: Shield seal on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Application: Suitable for electric motors to robotics, RC cars, RC helicopters, RC planes, RC trucks, lab equipment, jewelry, hand piece, radio controlled models, anemometers, miniature gearboxes, small motors, electric Fans, automotives and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
Dimensions: 0.00 x 0.50 x 0.00 Inches
See On Amazon #22
HiPicco M18 x 250mm Fully Threaded Rod & Studs, 304 Stainless Steel Right Hand Threads Rods, M18-2.5 Thread Pitch for Anchor Bolts, Clamps, Hangers and U-Bolts 1 Pack
Asin: B0C94VZ3D3 | Model: M18 x 250mm | PartNumber: M18 x 250mm
【Performance】The Steel Threaded Rod Has Good Toughness, Is Easy To Shape Without Cracks. It Can Make The Fasteners That Screw Into Threaded Nuts Or Tapped Holes, Allowing For The Assembly Of Components..
【What You Get】1Pcs X Stainless Steel Fully Threaded Rod. If You Have Any Questions About This Item, Please Feel Free To Contact Us!.
【Applications】Suitable For Assembly Fastening, Screw Into Threaded Nuts Or Tapped Holes. Widely Used For Anchor Bolts, Clamps, Hangers And U-Bolts And Many More Projects Where A Metal Rod With Continuous Threading Or No Head Or Fashioned Tip Is Required.
【Material】Threaded Rod Made Of 304 Stainless Steel, Provides Great Corrosion Resistance And Antirust Ability For Long Service Life..
Features
- Size Thread Dia.: M18; Thread Pitch: 2.5mm; Total Length: 250mm / 9.84"; Thread Style: Right Hand; Can be drilled, cut, heated and shaped.
- Material Threaded rod made of 304 stainless steel, provides great corrosion resistance and antirust ability for long service life.
- Performance The steel threaded rod has good toughness, is easy to shape without cracks. It can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components.
- Applications Suitable for assembly fastening, screw into threaded nuts or tapped holes. Widely used for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required
- What you get 1pcs x Stainless Steel Fully Threaded Rod. If you have any questions about this item, please feel free to contact us!
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
Dimensions: 0.71 x 9.84 x 0.71 Inches
See On Amazon #23
HiPicco R2AZZ Deep Groove Ball Bearings, ID 1/8" x OD 1/2" x Width 11/64" Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 10pcs
Asin: B0C74WGMJ9 | Model: R2AZZ | PartNumber: R2AZZ
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance..
Application: Suitable For Electric Motors To Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Lab Equipment, Jewelry, Hand Piece, Radio Controlled Models, Anemometers, Miniature Gearboxes, Small Motors, Electric Fans, Automotives And Other Fields..
Advantage: Shield Seal On Both Sides Of The Bearing Can Keep Lubricant In And Prevent The Intrusion Of Liquid Impurities..
Material: The Bearing Is Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Features
- Model: R2AZZ Bearings,(I.D.=1/8", O.D.=1/2", Thickness=11/64");
- Material: The bearing is made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance.
- Advantage: Shield seal on both sides of the bearing can keep lubricant in and prevent the intrusion of liquid impurities.
- Application: Suitable for electric motors to robotics, RC cars, RC helicopters, RC planes, RC trucks, lab equipment, jewelry, hand piece, radio controlled models, anemometers, miniature gearboxes, small motors, electric Fans, automotives and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #24
HiPicco Linear Ball Bearings, LM25UU 25mm Linear Motion Bushing Double Side Rubber Sealed Rod Liner Shaft Parts for CNC Machine 3D Printer 4 Pack
Asin: B0BR292RQ8 | Model: LM25UU | PartNumber: LM25UU
Usage：Linear Bearings Are Part Of Linear Motion Systems, Often Used In Conjunction With Cylindrical Shafts Or Guideways.
Applications: Mechanical Slides, 2-Axis And 3-Axis Tables, Linear Tables, 3D Printers, Cnc Machines, Electronic Equipment, Food Machinery, Packaging Machinery, Etc..
Features: Nickel Plating Enhances Corrosion Resistance And Durability. These Linear Bearings With Nickel-Plated Surface Treatment Can Operate Under Corrosive Or High-Temperature Conditions.
Double Sealed Design: The Slide Bearing Are Double Sealed, So As To Avoid Contaminants Entering And Save Lubricant..
Features
- SIZE Model: LM25UU, Bore Diamter (dr): 25mm, Outer Diameter (D): 40mm, Total Length (L): 59mm.
- DOUBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant.
- USAGE Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways
- FEATURES: Nickel plating enhances corrosion resistance and durability. These linear bearings with Nickel-Plated surface treatment can operate under corrosive or high-temperature conditions
- APPLICATIONS: Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, CNC machines, electronic equipment, food machinery, packaging machinery, etc.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #25
HiPicco 623ZZ Deep Groove Ball Bearings, ID 3mm x OD 10mm x Width 4mm Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 20pcs
Asin: B0CH2XNR27 | Model: 623ZZ | PartNumber: 623ZZ
Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Application: Suitable For Automation Control Components To Robotic Systems, Chemical Lab Equipment, High Speed Applications, Food Processing Equipment, Hand Piece, Rc Helicopters, Rc Planes, Fan Motors And Other Fields..
Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Rubber Sealed, Pre-Lubricated With Grease.
Features
- 623ZZ Bearings,(I.D.=3mm, O.D.=10mm, Thickness=4mm);
- Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
- Made of chrome steel (GCr15), durability and resistance to under heavy loads
- Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Application: Suitable for automation control components to robotic systems, chemical lab equipment, high speed applications, food processing equipment, hand piece, RC helicopters, RC planes, fan motors and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon #26
HiPicco MR83-2RS Deep Groove Ball Bearings, ID 3mm x OD 8mm x Width 3mm Miniature Bearings, Double Rubber Sealed Ball Bearing Pre-Lubricated Chrome Steel Z2 Lever 10pcs
Asin: B0C74WQT9B | Model: MR83-2RS | PartNumber: MR83-2RS
Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Apply For Electric Motors To Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Lab Equipment, Jewelry, Hand Piece, Radio Controlled Models, Anemometers, Miniature Gearboxes, Small Motors And Other Fields..
Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Rubber Sealed, Pre-Lubricated With Grease.
Features
- MR83-2RS Sealed Bearings,(I.D.=3mm, O.D.=8mm, Thickness=3mm);
- Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
- Made of chrome steel (GCr15), durability and resistance to under heavy loads
- Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Apply for electric motors to robotics, RC cars, RC helicopters, RC planes, RC trucks, lab equipment, jewelry, hand piece, radio controlled models, anemometers, miniature gearboxes, small motors and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #27
HiPicco Drawn Cup Needle Roller Bearings, 10pcs HK121812 Open End Caged Bearing, 12mm Bore, 18mm OD, 12mm Width ST14 Steel Single Row Roller
Asin: B0BYW415ZF | Model: HK121812 | PartNumber: HK121812
[Features] - The Size Is Standardized, Easy To Install And Disassemble, And Easy To Maintain; Pre-Lubricated. Good Running Properties; Low Cross Section, Enable Downsizing And Suit For Use In Restricted Mounting Spaces..
[Application] - Needle Bearings Are Used In Automobile Components Such As Rocker Arm Pivots, Pumps, Compressors, And Transmissions, Also Used For Office Equipment, Paper-Towel Dispensers, Exercise Equipment, Appliances And Two-Speed Gearboxes..
[Capability] - Dynamic Load Rating (Cr): 5500N; Static Load Rating (Cor): 6300N; Limiting Speed (Oil): 17000Rpm.
[Material] - St14 Steel Drawn Cup, St13 Steel Cage, Gcr15 Needle Roller, High Load Carrying Capacity And Stiffness, Good Heat Tolerance..
Features
- [Model] - HK121812 (Bore Dia. (Fw)= 12mm, Outer Dia. (D)a= 18mm, Width (C)= 12mm)
- [MATERIAL] - ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Roller, high load carrying capacity and stiffness, good heat tolerance.
- [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Pre-Lubricated. Good running properties; Low cross section, enable downsizing and suit for use in restricted mounting spaces.
- [CAPABILITY] - Dynamic Load Rating (Cr): 5500N; Static Load Rating (Cor): 6300N; Limiting Speed (Oil): 17000rpm
- [APPLICATION] - Needle bearings are used in automobile components such as rocker arm pivots, pumps, compressors, and transmissions, also used for office equipment, paper-towel dispensers, exercise equipment, appliances and two-speed gearboxes.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #28
HiPicco F624ZZ Flanged Ball Bearing, ID 4mm x OD 13mm x Width 5mm Miniature Bearings, Double Metal Shielded Deep Groove Bearings, Pre-Lubricated (GCr15) Chrome Steel 10pcs
Asin: B0CRLHGH8T | Model: F624ZZ | PartNumber: F624ZZ
Material: Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Application: Suitable For Glider/Rocker Arms, Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Wheels Of The Cart, Lawnmowers, Printers, Pumps, Motors, Gearboxes, Reducer, Textile Machinery, Electronic Equipment, Gyros, Servos, Automotives And Other Fields..
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Metal Shielded, Pre-Lubricated With Grease.
Features
- Model: F624ZZ ABEC1 Flanged Bearings,(I.D.=4mm, O.D.=13mm, Thickness=5mm, Flange Dia: 15mm);
- Precision metric miniature ball bearing, both sides metal shielded, pre-lubricated with grease
- Material: Made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Application: Suitable for glider/rocker arms, robotics, RC cars, RC helicopters, RC planes, RC trucks, wheels of the cart, lawnmowers, printers, pumps, motors, gearboxes, reducer, textile machinery, electronic equipment, gyros, Servos, automotives and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon #29
HiPicco Thrust Ball Bearings, 10pcs F5-10M Miniature Plane Axial Ball Bearing 3-in-1, 5mm x 10mm x 4mm Chrome Steel Single Direction
Asin: B0BXY9TQW7 | Model: F5-10M | PartNumber: F5-10M
[Features] - The Size Is Standardized, Easy To Install And Disassemble, And Easy To Maintain; Low Friction Resistance, Low Power Consumption And High Mechanical Efficiency; High Precision, High Speed, Small Wear And Long Service Life..
[Application] - Thrust Ball Bearings, Composed Of Bearing Balls Supported In A Ring, Can Be Used In Low Thrust Applications Where There Is Little Axial Load, Such As Oven Turntable, Jack, Pump, Rotating Applications, Machine Tools, Automobiles, Etc..
[Capability] - Dynamic Load Rating (Cr): 950N; Static Load Rating (Cor): 830N; Limiting Speed (Grease): 5100Rpm, Designed For Low Speed Operation And Axial Loads Only.
[Material] - Made Of Chrome Steel(Aisi 52100), Have Great Wear-Resistant, High Temperature Resistance And High Hardness; Brass Cage.
Features
- [SIZE] - Bore Diameter=5mm, Outer Diameter=10mm, Thickness=4mm
- [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage
- [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.
- [CAPABILITY] - Dynamic Load Rating (Cr): 950N; Static Load Rating (Cor): 830N; Limiting Speed (Grease): 5100rpm, designed for low speed operation and axial loads only
- [APPLICATION] - Thrust ball bearings, composed of bearing balls supported in a ring, can be used in low thrust applications where there is little axial load, such as oven turntable, jack, pump, rotating applications, machine tools, automobiles, etc.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: HiPicco
See On Amazon #30
HiPicco MF84ZZ Flanged Ball Bearing, ID 4mm x OD 8mm x Width 3mm Miniature Bearings, Double Metal Shielded Deep Groove Bearings, Pre-Lubricated (GCr15) Chrome Steel 10pcs
Asin: B0CRLGS1CL | Model: MF84ZZ | PartNumber: MF84ZZ
Material: Made Of Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Application: Suitable For Glider/Rocker Arms, Robotics, Rc Cars, Rc Helicopters, Rc Planes, Rc Trucks, Wheels Of The Cart, Lawnmowers, Printers, Pumps, Motors, Gearboxes, Reducer, Textile Machinery, Electronic Equipment, Gyros, Servos, Automotives And Other Fields..
High Quality: Low Noise Z2, Abec Tolerance 1 (P0), High Speed. High Temperature Resistance. Resistance To High Load..
Precision Metric Miniature Ball Bearing, Both Sides Metal Shielded, Pre-Lubricated With Grease.
Features
- Model: MF84ZZ ABEC1 Flanged Bearings,(I.D.=4mm, O.D.=8mm, Thickness=3mm, Flange Dia: 9.2mm);
- Precision metric miniature ball bearing, both sides metal shielded, pre-lubricated with grease
- Material: Made of chrome steel (GCr15), durability and resistance to under heavy loads
- High Quality: Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
- Application: Suitable for glider/rocker arms, robotics, RC cars, RC helicopters, RC planes, RC trucks, wheels of the cart, lawnmowers, printers, pumps, motors, gearboxes, reducer, textile machinery, electronic equipment, gyros, Servos, automotives and other fields.
- See more on Amazon...
Brand: HIPICCO | Manufacturer: Hipicco
See On Amazon