Holstex - Buying Guide

Bestselling from Holstex on Amazon

1. KYDEX Thermoform Sheet - (Type V) - (P1 Texture) - (0.080 Thickness) - (8in x 12in Sheets) - (Black)...
2. HolsterSmith Finishing Washers - #8 - (0.530 Dia.) - Metal - Countersunk - Round Top - for Holster M...
3. HolsterSmith Thermoform Molding Foam - Maxx Form - USA Made - (8in x 12in x 1in) - (2 Pack) - for KY...
4. Holstex Thermoform Sheet - (Carbon Fiber Texture) - (.080 Thickness) - (8in x 8in Sheet) - (Armor Bl...
5. KYDEX Thermoform Sheet - (Type V) - (P1 Texture) - (0.060 Thickness) - (8in x 12in Sheets) - (Black)...
6. Colored Nylon Finishing Washers - (Blizzard White) - (50 Pack) - (0.530 Inch Diameter) Round Top - f...
7. KYDEX Thermoform Sheet - (P1 Texture) - (.080 Thickness) - (8in x 12in) - (Black) - (2 Sheets) - DIY...
8. KYDEX Thermoform Sheet - (Type V) - (P1 Texture) - (0.060 Thickness) - (8in x 8in Sheets) - (Black) ...
9. Holster Attachment Mounting Assembly (12 Pack) - (3/8 Chicago Slotted Binding Post + 3/8 Truss Hea...
10. KYDEX Thermoform Sheet - (PC Texture) - (.093 Thickness) - (8in x 12in) - (Black) - (2 Sheets) - DIY...
11. KYDEX Thermoform Sheet - (P1 Texture) - (Infused Print) - (12in x 12in) - (HexCam - 3D - Specter) - ...
12. KYDEX Thermoform Sheet - (8in x 12in x .080in) - (Kryptek Typhon) - (Infused Print) - (1 Sheet) - (P...

Features

• For DIY Thermoforming: Kydex V Thermoform Sheet is very similar to other thermoform sheet materials like Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in thermoform holster making, cosplay costume creation, removable surface coverings, keel guard protectors, and much more.
• Color : Black | KYDEX Type V Texture: P1 Hair Cell: The texture applied to the surface of the Kydex V sheet is referred to as P1 Hair Cell . This is a reference to the size and shape of the texture grain and is common on many Kydex items seen in the marketplace. P1 is the most common texture for holsters, sheaths, and other carry items. The texture on Kydex V sheet is uniform across the surface of the material and produces a non-reflective, scratch resistant finish.
• Thickness (.080 in.) | Easy To Form And Use: To use Kydex V thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• KYDEX V Sheet Material Is Made In The U.S.A.: Kydex V sheet material is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Quantity : (2) 8 in. x 12 in. sheets (nominal cut) | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by Holstex is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex V sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Style: Round Top (These work on most project items) | Our U.S.A. designed round top countersunk finishing washers are made from super-durable metal. They are excellent for adding a touch of finishing quality to any item, such as a KYDEX holster, home improvement project, cabinet work, art project, automotive trim, and much more. They hide the edge of counter sunk flat head beveled screws to create a smooth, safe contact surface while hiding the ugly hole created by most drills.
• Size: (Outer .530 in.)(Inner .305 in.)(Hole .280 in.) | Designed for beveled head screws: These metal round top finishing washers are 0.530 inch in diameter and feature a 0.305 inch inner bevel diameter. Their through-hole is 0.280 inches in diameter and will fit most common flat head decking screws, upholstery screws, computer cabinet screws, automotive trim screws and much more.
• Material: (Metal) | U.S.A. Owned Business: We take pride in every product that we manufacture and sell. Our metal round top finishing washers are available in two (2) sizes and three (3) material finishes. These can also be used with other types of screw heads and will hide any underside drill hole that is below their outer diameter in size.
• Color/Finish: (Black) | Included in this offer: Each package of HolsterSmith USA designed metal round top finishing washers contains 50 washers in the selected material and size. The finish of these washers is excellent.
• Quantity: 50 Pack | Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the quality component line offered by HolsterSmith is unsurpassed in the holster accessory industry. Our metal round top finishing washers and holster attachments are used and relied on by professional soldiers, police, public safety individuals, and holster makers worldwide. Each finishing washer is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Foam Grade ( Maxx Form )(Great Detail/Great Lifecycle): Holstex Thermoform Molding Foams Are Industry Standards For Parts Detail: If you want the best quality and all-around molding effects from your thermoform molding work, Holstex brand foams are specifically designed for thermoform molding applications like DIY Holster Making, Knife Sheath Making, Cosplay Costume Making, Airsoft Armor, and countless other creations. Holstex foam is available in three grades, 4 thicknesses, and two sizes.
• Thickness: 1 Inch | Used For Press Molding Heated Thermoform Sheet Material: Holstex brand thermoform molding foams are specifically engineered for use in press-molding sheet materials like KYDEX, HOLSTEX, Boltaron, and ABS plastic sheet materials. Holstex brand thermoforming foams have much improved overall production performance in the fabrication cycle. Our molding foam variations consistently produce more detail and last longer in production.
• Width: 8 Inches | Length: 12 Inches | Holstex Molding Foams Can Be Used On Both Sides To Extend Production Lifecycle: Holstex brand thermoform molding foams can be used on both sides to extend their production lifecycle. There are no rivals to Holstex Molding Foams in production durability. We have perfected our formulation over 20 years
• Holstex Thermoform Molding Foams Are Made In The U.S.A.: Holstex thermoform molding foam products are proudly made in the U.S.A. Each molding foam sheet is individually inspected and tested for quality before shipping. You can order with confidence!
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making parts and accessories, the quality thermoform molding foams offered by HolsterSmith are unsurpassed in the holster making and sheet thermoforming industries. Holstex brand molding foams are used by holster makers, cosplay designers, kayak users, RC model making, home DIY, and thousands of others worldwide. Each sheet is guaranteed for quality.
• See more on Amazon...

Features

• For DIY thermoforming: Holstex Carbon Fiber Textured Sheet is very similar to both Kydex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in thermoform holster making, cosplay costume creation, removable surface coverings, keel guard protectors, and much more.
• 3K Twill Carbon Fiber Texture: The carbon fiber texture applied to the surface of the Holstex sheet is referred to as 3K Twill pattern. This is a reference to the size and shape of the texture and is common on many carbon fiber items. 3K Twill is the most common carbon fiber weave size. The carbon fiber texture on Holstex sheet is 3 dimensional and provides wonderful contrasts and lighting reflections, giving its appearance a striking effect on finished items.
• Easy to form: To use Holstex carbon fiber textured thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• Made in USA: Holstex carbon fiber textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Holstex carbon fiber textured sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Works on most project items: These U.S.A. designed round top countersunk finishing washers are made from super-durable proprietary nylon. They are excellent for adding a touch of finishing quality to any KYDEX holster, home improvement project, cabinet work, art project, automotive trim, and much more. They hide the edge of counter sunk flat head beveled screws to create a smooth, safe contact surface while hiding the ugly hole created by most drills.
• Designed for beveled head screws: These colored round top finishing washers are 0.530 inch in diameter and feature a 0.375 inch inner bevel diameter. Their through-hole is 0.215 inches in diameter and will fit most common flat head decking screws, upholstery screws, computer cabinet screws, automotive trim screws and much more. These can also be used with other types of screw heads and will hide any underside drill hole that is below their outer diameter in size.
• Included in this offer: Each package of HolsterSmith USA designed colored nylon round top finishing washers contains 50 washers in the selected color. The color of these washers are vibrant and throughout the nylon material. Their color cannot be rubbed off or smeared. They resist oil, paint, furniture polish, auto cleaners and other common household cleaning solutions.
• U.S.A. Owned Business: We take pride in every product that we manufacture and sell. Our colored nylon round top finishing washers are available in Zombie Green, Tiffany Blue, Storm Gray, Purple, Police Blue, Olive Drab, Neon Yellow, Hunter Orange, Hot Pink, Gunmetal Gray, Foliage Green, Flat Dark Earth Spring, Flat Dark Earth Fall, Red, Desert Tan, Desert Fox, Coyote Brown, Chocolate, Bubblegum, Blood Red, Blizzard White, Black, and Battleship Gray. These match KYDEX sheet for holster making.
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the quality component line offered by HolsterSmith is unsurpassed in the holster accessory industry. Our nylon round top finishing washers holster attachments are used and relied on by professional soldiers, police, public safety individuals, and holster makers worldwide. Each colored nylon round top finishing washer is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in thermoform holster making, cosplay costume creation, removable surface coverings, keel guard protectors, and much more.
• Texture: P1 Hair Cell | Type: T (A Grade): The texture applied to the surface of the Kydex sheet is referred to as P1 Hair Cell . This is a reference to the size and shape of the texture grain and is common on many Kydex items seen in the marketplace. P1 is the most common texture for holsters, sheaths, and other carry items. The texture on Kydex sheet is uniform across the surface of the material and produces a non-reflective, scratch resistant finish.
• Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• Made in U.S.A.: Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Each 0.375 Inch SPTHA Slotted Post Holster Mounting Assembly Includes: (1) 0.375 Inch Slotted Post (Black Coated), (1) 0.375 Inch Phillips Truss Head Screw (Black Coated), (1) 0.125 Inch EDPM Washer
• (1) QTY = (12) SPTHRA Assemblies | Commonly called, Black Chicago Screw Slotted Post Assemblies, these are black oxide coated slotted post truss head holster attachment mounting assemblies that are used to affix common belt clips, belt loops, molle attachments, tek-lock attachments, combat loops, holster wings, speed release attachments, and more.
• Smooth Assembly Surfaces For Maximum Wear Comfort: Each SPTHA holster attachment mounting assembly has been deburred and edge finished to ensure the maximum wear comfort. Just because you sell a screw and a post doesn't make it wear well. Care must be taken to smooth the surfaces and edges of each part within the assembly to ensure that the wearer experiences maximum comfort without irritation. Our assembly parts are second to none in holster making, garment manufacturing, canvas, and more.
• EPDM Rubber Holster Mounting Washers (Included): These washers are precisely designed to fit the post assembly. The through-hole on each washer perfectly fits the shaft of each mounting post and does not require the inside protrusions found on the inferior washers being offered that allow them to claim tightness . Our washers are designed exclusively for perfect fit on each CKK mounting post.
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making parts and accessories, the quality component line offered by HolsterSmith is unsurpassed in the holster making industry. HolsterSmith Slotted Post Holster Mounting Assemblies are used by professional soldiers, police, rescue, and holster makers around the globe. Each assembly is inspected and guaranteed for fit, finish, and quality.
• See more on Amazon...

Features

• For DIY thermoforming: Kydex PC Textured Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in thermoform holster making, cosplay costume creation, removable surface coverings, keel guard protectors, and much more.
• Texture: PC | Type: T (A Grade): The texture applied to the surface of the Kydex sheet is referred to as PC . This is a reference to the size and shape of the texture grain and is common on many Kydex items seen in the marketplace. PC is a very common texture for holsters, sheaths, and other carry items. The texture on Kydex sheet is uniform across the surface of the material and produces a non-reflective, scratch resistant finish.
• Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• Made in U.S.A.: Kydex PC textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex PC textured sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : HexCam - 3D - Specter | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Kryptek Typhon| Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(8 x 12) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• HOLSTEX Premium DIY Thermoform Sheet
• Texture: Carbon Fiber/Untextured | Type: T (A Grade)
• Thickness: (.060 in.)
• Color: Armor Black
• Quantity : (3) 12 inch x 12 inch sheets (nominal cut)
• See more on Amazon...

Features

• Each SPTHRA-500-PH-BK-12 Holster Retention Assembly Includes: (1) .500 Inch Slotted Post (Black Coated) + (1) .500 Inch Phillips Truss Head Screw (Black Coated) + (1) .480 Inch EDPM Washer
• (1) QTY = (12) SPTHRA Assemblies | Commonly called, Black Chicago Screw Assemblies, these are black oxide coated slotted post truss head holster retention assemblies used to create the retention on a fold-over or taco-style holster. The assembly is used to add a controlled pinch point to the gun by the holster to hold it in place.
• Smooth Assembly Surfaces For Wear Comfort: Each SPTHA assembly has been deburred and edge finished to ensure the maximum wear comfort. Just because you sell a screw and a post doesn't make it wear well. Care must be taken to smooth the surfaces and edges of each part within the assembly to ensure that the wearer experiences maximum comfort without irritation. Our assembly parts are second to none in holster making.
• EPDM Rubber Retention Washer (Included) works by adding a rubber standoff washer between the material layers of the holster. This can then be tightened (or loosened) with the included phillips truss head screw to adjust the grip of the thermoform material of the holster against the holstered item. This creates the adjustable retention.
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making parts and accessories, the quality component line offered by HolsterSmith is unsurpassed in the holster making industry. HolsterSmith retention assemblies are used and relied on by professional soldiers, police, rescue, and holster makers each day. Each assembly is inspected and guaranteed for fit, finish, and quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Kryptek - Wraith - Micro | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Offically Licensed | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : SuperCam - Hot Pink | Texture: P1 Hair Cell | Type: T (A Grade): The texture applied to the surface of the Kydex sheet is referred to as P1 Hair Cell . This is a reference to the size and shape of the texture grain. P1 is the most common texture for holsters, sheaths, and other carry items. The texture on Kydex sheet is uniform across the surface of the material and produces a non-reflective, scratch resistant finish.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Closed-Slotted Belt Loop | Holster Attachment | USA Design
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Snake Skin - FDEF Rattler | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Chicago Screws | Holster Mounting Hardware for DIY KYDEX & Leather Holsters
• Size: #8 | Barrel Diameter: 0.203 (13/64) inch | Barrel Length: 0.500 (1/2) inch
• Finish: Gunmetal
• Sold As: 10 Chicago Screws (10 Female Post and 10 Male Screws)
• Engraving: No Graphic
• See more on Amazon...

Features

• For DIY thermoforming: Holstex Basketweave Sheet is very similar to both Kydex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in thermoform holster making, cosplay costume creation, removable surface coverings, keel guard protectors, and much more.
• 3D infused graphic: The printed graphic on this Basketweave textured sheet is infused into the surface under heat and pressure. It is highly durable, scratch resistant, and will not fade. Both the heights and depths of the 3D Basketweave texture are covered with the infused imprint. This gives the effect of being raised off the surface of the sheet and causes the graphic to present its effect with unmatched depth.
• Easy to form: To use Holstex Basketweave Thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-320 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• Made in USA: Holstex basketweave textured infused thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Holstex Basketweave infused graphic sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• Abrasive Wheel - 400 Grit
• Wheel Dimensions: 6.0 in x 0.50 in
• Shaft Hole Size - 0.50 in
• Wheel Grits Included: (3) 400
• Works great for thermoform sheet edge finishing, nylon polishing, pvc finishing, removing rust and corrosion from metal parts.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Desert Camo - 3 Color | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Bear Arms Camo - Battleship Gray | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Licensed Print | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(12 x 12) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Reaper Black - Gunmetal Gray | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : KING'S CAMO - XK7 | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Kryptek Xtreme Camo - Hot Pink - Micro | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Reaper Z - Hunter Orange | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Reaper H2O - Hunter Orange | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• TYPE: T | Texture: P1 (Haircell) | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• Size/Quantity : (1)(11.5 x 11.5) Inches | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• See more on Amazon...

Features

• KYDEX Thermoform Sheet | Graphic Infused | (*Includes HolsterSmith Instructions) | For DIY thermoforming: Kydex Thermoform Sheet is very similar to both Holstex and Boltaron in the way it forms when heated and molded around an object. Once cooled, this material will keep the shape of the item that was used to mold the shape into place. In its cooled state, it is very durable and light weight. It is used widely in holster making, cosplay costume creation, keel guard protectors, and much more.
• Infused Pattern : Graveyard Camo - Gunmetal Gray | Digital Infusion Process: The Infused Prints are applied with our leading digital infusion process. Our process allows the graphics to be thermally bonded to the top layer of the KYDEX thermoform sheet, yet maintains the original sheet's texture and size. By maintaining the most original sheet texture, our process allows the graphic to display a 3D depth like never before. This is the best infusion print on the market.
• Thickness: 0.08 Inches | Easy to form: To use Kydex thermoform sheet, score and cut a piece slightly larger than the object being covered. Heat the material to a 300-375 degree Fahrenheit range and place over object. Using forming foam, press the material around the object and allow it to cool in position. Once cooled, remove and sand edges to desired shape. (Detailed instructions included with order.)
• TYPE: T | Texture: P1 (Haircell) | Made in U.S.A. : Kydex P1 textured thermoform sheet is proudly made in the U.S.A. Each sheet is individually packaged and inspected by our staff. We take the greatest of pride in the products that we offer and stand behind every item sold. Order with confidence!
• Size/Quantity : (1)(11.5 x 11.5) Inches | 100% Satisfaction Guaranteed: With over 20 years of experience in developing holster making accessories, the thermoform sheet material line offered by HolsterSmith is unsurpassed in the holster making and accessory industry. Our thermoform sheet materials are used by professional soldiers, police officers, public safety individuals, and holster makers worldwide. Each Kydex sheet is individually inspected and guaranteed for quality.
• See more on Amazon...