HzdaDeve - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
HzdaDeve Print Bed Light Beam H1H Platform Sheet and Smooth PEO Build Plate 235X235mm Spring Steel Print Bed for K1/Ender 3 V3/Ender 3 V3 Ke/Ender 3 V3 SE/K1C/CR10-SE/Ender 3 V2 Pro/SV05/SV06/SV07
Asin: B0CWP3C3VD | Model: platform bed 235X235 | PartNumber: platform bed 235X235
H1h Light Beam+Peo Design: Double-Sided Printing Makes Your Creativity Run Wild. The Prints Will Leave Vibrant Colors Under Different Angles Of Light..
It's Easy To Remove The Prints When The Pei Sheet 235X235 Cools Down To Around 40°C. If It's Stuck, Please Gently Bend The Build Plate To Pop It Off..
Simple Installation: Peel Off The Backing Paper And Stick It To The Bed, Finally Place The Pei Steel Plate On The Magnetic Sheet..
Package Includes: 1 Pack Print Bed Light Beam+Peo Design, The Bed Sheet Size Is 235X235mm..
Features
- Compatible Printer: This 235X235mm PEO+PEI bed is compatible with K1/Ender 3 V3/Ender 3 V3 Ke/Ender 3 V3 SE/K1C/CR10-SE/Ender 3 V2 Pro/SV05/SV06/SV07 3D Printer.
- Package Includes: 1 pack print bed light beam+PEO design, the bed sheet size is 235X235mm.
- H1H Light Beam+PEO Design: Double-sided printing makes your creativity run wild. The prints will leave vibrant colors under different angles of light.
- Simple Installation: Peel off the backing paper and stick it to the bed, finally place the PEI steel plate on the magnetic sheet.
- It's easy to remove the prints when the PEI sheet 235X235 cools down to around 40 C. If it's stuck, please gently bend the build plate to pop it off.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve 235X235mm for Creality
See On Amazon #2
HzdaDeve High Quality Silicone Socks High Temperature Resistant V5 V6 J-Head Hotend Heating Block for Anycubi Kobra Kobra Go Kobra Neo i3 Mega Series Chiron 3D Printing Accessories
Asin: B0BLC7BJCP | Model: Silicone-5 | PartNumber: Silicone-5
The Pack Contains 5-Piece Blue Heater Block Silicone Cover..
The Silicone Socks Keep Your Hot End Extremely Stable And Clean And Can Be Used As A Direct Replacement For The Original Silicone Cuffs.
Hotend Silicone Sock Size:19 X 19 X 15Mm (0.75 X 0.75 X 0.59 Inch)..
The Silicone Sock Is Made Of A High Temperature Resistant Silicone Material. Resistant To High Temperatures Up To 280°C..
Features
- Compatible with Anycubic Kobra Kobra Go Kobra Neo i3 Mega Series Chiron Series 3D Printer (not available for Kobra Plus/Max, Vyper).
- The silicone sock is made of a high temperature resistant silicone material. Resistant to high temperatures up to 280 C.
- The pack contains 5-piece blue heater block silicone cover.
- Hotend Silicone Sock Size:19 x 19 x 15mm (0.75 x 0.75 x 0.59 inch).
- The silicone socks keep your hot end extremely stable and clean and can be used as a direct replacement for the original silicone cuffs
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #3
HzdaDeve Hotend for Flsun QQ-S SR Delta Hot End Kit Extruder Print Head Replacement 24V 40W Cartridge Heater Tube NTC 100K Thermistor Temp Sensor for 3D Printer Accessories
Asin: B0BBQ5V7R4 | Model: flsunn-printer-kit | PartNumber: flsunn-printer-kit
Heater Cartridge: 24V 40W. Thermistor: Ntc 100K 3950..
Our Silicone Socks Can Only Withstand Up To 280 Degrees Celsius. If Your Printer Temperature Exceeds 280 Degrees Celsius. Please Take Off The Silicone Socks..
Simple Installation: Remove The Old Hot End And Install The New Hotend To Start. (Heating Tube, Thermistor, Nozzle Etc Are Pre-Installed).
What You Get: 1 Extruder Kit Which Includes Thermistor, Cartridge Heater, Nozzle, Nozzle Tube, Heater Block, Silicone For Flsun Printer..
Features
- This hotend works with Flsun SR/QQ-S Pro 3D printers.
- What You Get: 1 extruder kit which includes thermistor, cartridge heater, nozzle, nozzle tube, heater block, silicone for Flsun printer.
- Heater cartridge: 24V 40W. Thermistor: NTC 100k 3950.
- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Our silicone socks can only withstand up to 280 degrees Celsius. If your printer temperature exceeds 280 degrees Celsius. Please take off the silicone socks.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #4
HzdaDeve 3D Printer Part Gear Grease Lubricant Guide Rail Grease Optical Axis Lubricating Grease for Kobra 2 Series/Neptune 4/Ender 3 V3 KE/Ender 3 V3/CR10-SE/Lab X1 P1P P1S A1 Mini (3 Pack)
Asin: B0CPDY12DV
Made Of High Quality Materials, Non-Toxic, Tasteless And Easy To Use..
3D Printer Diy Accessories Without Running, Dripping, Melting, Or Separating..
Anti-Rust, Smooth Function. Silent Work, Protection For 3D Printer..
Package Include: Guide Rail Grease X 3.
Features
- This 3D printer part gear grease replacement is compatible for kobra 2,kobra 2 neo kobra 2 pro kobra 2 plus kobra 2 MAX;Neptune 4 pro/plus/max/ender 3 v3 ke /ender 3 v3 CR10-SE;Bambu lab x1 p1p p1s A1 mini 3D Printer
- Package include: Guide Rail Grease X 3
- Made of high quality materials, non-toxic, tasteless and easy to use.
- Anti-rust, smooth function. Silent work, protection for 3D printer.
- 3D Printer DIY Accessories without running, dripping, melting, or separating.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Gear Grease for Kobra 2
See On Amazon #5
HzdaDeve Hotend for Elegoo Neptune 3 Pro Hot End Kit for Neptune 3 Plus/Max Extruder Head Heater Break Silicone Cover Thermistor with Extra 4PCS Nozzles for 3D Printer Accessories Parts
Asin: B0CCNXDPQD
Plug And Play: Remove The Old Sprite Exturder And Install The New Hot End To Start. (3D Accessories Are Pre-Installed).
Nozzle And Hot Block: The Seamless Connection Between The Nozzle And Heat Breakage Accelerates The Nozzle To Dissipate Heat, And The Heat Breakage To Insulate, And Releases The Nozzle Blockage..
Filament Material: The Print Head For Printer Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Package Included: 1 Set Hot End Replacement And Extra 4Pcs Nozzles..
Features
- Notice: This hotend kit is only compatible with ELEGOO Neptune 3 Pro/Neptune 3 Plus/Neptune 3 Max 3D FDM printer.
- Package Included: 1 set hot end replacement and Extra 4PCS nozzles.
- Plug and Play: Remove the old sprite exturder and install the new hot end to start. (3D accessories are pre-installed)
- Filament material: The print head for printer works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- Nozzle and hot block: The seamless connection between the nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend for Elegoo Neptune 3 Pro
See On Amazon #6
HzdaDeve 3D Printer Open Timing Belt 2GT 6mm for Anycubi Kobra 3D Printer X Y Axis Accessories
Asin: B0BW5SGMY4 | Model: Any-KB-Belt | PartNumber: Any-KB-Belt
Glass Fiber Provides Belts With High Strength, Excellent Flexibility And High Tensile Strength Without Lubrication, Which Results In Maintenance Costs Etc. Reduced..
When Replacing The Timing Belt, The Belt Tension Must Be Reduced To A Minimum Before It Can Be Removed..
Buckles Have Been Pressed On One End Of The Belt, Can Be Installed Directly..
The Package Includes 1 Piece 1000 Mm Open Timing Belt And 1 Piece 850 Mm Open Timing Belt And 4 Piece Buckles. Please Cut It To 900 Mm (X-Axis) And 780 Mm (Y-Axis) According To Your Requirements..
Features
- Compatible with Anycubi Kobra 3D printer X-Y axis. Type: 2TG 6mm timing belt.
- The package includes 1 piece 1000 mm open timing belt and 1 piece 850 mm open timing belt and 4 piece buckles. Please cut it to 900 mm (X-axis) and 780 mm (Y-axis) according to your requirements.
- Glass fiber provides belts with high strength, excellent flexibility and high tensile strength without lubrication, which results in maintenance costs etc. reduced.
- Buckles have been pressed on one end of the belt, can be installed directly.
- When replacing the timing belt, the belt tension must be reduced to a minimum before it can be removed.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #7
HzdaDeve Thread Hardened Nozzles 0.4MM 0.2MM 0.6MM 0.8MM Stainless Steel Nozzles High Flow Wear Resistant Extruder Nozzle for Creality K1/K1 Max/Ender 3 V3 KE (5PCS)
Asin: B0CYT2S6WM | Model: 3d printer nozzles for K1 Max | PartNumber: 3d printer nozzles for K1 Max
Compatible Printer: Our Nozzles Are Compatible With K1/K1 Max/Ender 3 V3 Ke 3D Printer..
After-Sale Service: If There Are Any Questions, Just Contact Us Freely, And A Satisfactory Solution Will Be Provided Within 24 Hours.
High Speed: It's A Special Stainless Steel Design So The Print Head Heats Evenly. The Interior Of The Nozzle Is Smooth Without Burry, Which Not Only Reduces Air Resistance And Prevents The Filament From Jamming, But Supports High-Speed Printing..
Size: 0.2Mm 0.4Mm 0.6Mm 0.8Mm Stainless Steel Nozzles With 1.75Mm Pla/Abs/Petg/Tpu/Wood Filament..
Features
- Material: MK8 hardened nozzles are made of high-quality stainless Steel. The nozzle is not easy to stick filament with high hardness, resistant to wear and tear.
- Size: 0.2MM 0.4MM 0.6MM 0.8MM stainless steel nozzles with 1.75mm PLA/ABS/PETG/TPU/Wood filament.
- Compatible Printer: Our nozzles are compatible with K1/K1 Max/Ender 3 V3 KE 3D printer.
- High Speed: It's a special stainless steel design so the print head heats evenly. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing.
- After-Sale Service: If there are any questions, just contact us freely, and a satisfactory solution will be provided within 24 hours
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Hardend Nozzles for K1 Max
See On Amazon #8
HzdaDeve Heat Cartridge Heating Tube 24V 40W Thermistor Temp Sensor for Flsun SR/QQ-S Pro/Q5 Hotend Kit Hot End Parts Print Head Replacement Extruder Upgraded Version PT100 Volcano 3D Printer (4 Pack)
Asin: B09W98VY14 | Model: Flsun-sensor-kit | PartNumber: Flsun-sensor-kit
Package Includes: 2Pcs 24V 40W Heaters Tube And 2Pcs Ntc 100K Thermistors Temperature Sensor..
Please Feel Free To Email Or Q&A Us If You Have Any Question Or Problem..
Heater Head: 6X20mm; Cable Length: 180-200Mm. Thermistor: Resistance Value At 25°C=100K..
24V 40W Upgraded Heater: The Maximum Temperature Increases From 280 To 300℃ For Flsun 3D Printer Accessories..
Features
- Compatible Printer: This hotend kit is suitable for Flsun QQ-S Pro, SR (Super Racer) ,Q5.
- 24V 40W upgraded heater: The maximum temperature increases from 280 to 300 for Flsun 3D printer accessories.
- Package includes: 2PCS 24V 40W heaters tube and 2PCS ntc 100k thermistors temperature sensor.
- Heater head: 6x20mm; Cable length: 180-200mm. Thermistor: Resistance value at 25 C=100K.
- Please feel free to email or Q&A us if you have any question or problem.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #9
HzdaDeve 6PCS Hotend Silicone Sock Heater Block Silicone Cover Kit for Creality K1/K1 Max/Ender 3 V3 SE/CR10 SE 3D Printer Accessories Hotend Part Replacement (Red)
Asin: B0CRQW5RB8 | Model: silicone cover for Creality K1 Max | PartNumber: silicone cover for Creality K1 Max
High-Temperature Resistance: 280℃. Extend The Life Of The Heater Block By Keeping It Cleaner..
After Sale Service: If There Are Any Questions, Just Contact Us Freely, And A Satisfactory Solution Will Be Provided Within 24 Hours..
High Precise Size Which Can Be Assembled Preciously..
Package Includes: 6 Pack Heating Block Silicone Socks For Ender 3 V3 Se Printer..
Features
- Notice: This hot end silicone cover replacement is only compatible with K1/K1 Max/Ender 3 V3 SE/CR10 SE FDM 3D printer.
- Package Includes: 6 Pack heating block silicone socks for Ender 3 V3 SE Printer.
- High-temperature resistance: 280 . Extend the life of the heater block by keeping it cleaner.
- High Precise size which can be assembled preciously.
- After Sale Service: If there are any questions, just contact us freely, and a satisfactory solution will be provided within 24 hours.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Silicone Cover for K1/K1 Max
See On Amazon #10
HzdaDeve 3D Printer Heater Cartridge 24V 40W Thermistor Temp Sensor NTC 100K 3950 for Anycubic Kobra Plus/Max Vyper (4 Pack)
Asin: B0BRSCV1HH
The Package Includes 2-Piece 24V 40W 3D Printer Cartridge Heaters And 2-Piece Thermistors Temp Sensor..
After Sale Service: If There Is Any Questions, Just Contact Us Freely, The Satisfied Solution Will Be Provided Within 24 Hours..
Further Accessories For 3D Printers Can Also Be Found In Our Shop..
The Recommended Temperature Of The Heater Does Not Exceed 300 Degrees For Anycubic Printer..
Features
- This hotend kit is compatible for Anycubic Vyper/Kobra Plus/Kobra Max 3D Printer Extruder/Hot End.
- The recommended temperature of the heater does not exceed 300 degrees for Anycubic printer.
- The package includes 2-piece 24V 40W 3D printer cartridge heaters and 2-piece thermistors temp sensor.
- Further accessories for 3D printers can also be found in our shop.
- After Sale Service: If there is any questions, just contact us freely, the satisfied solution will be provided within 24 hours.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Heater Cartridge and Thermistor for Anycubic Kobra Plus/Max Vyper
See On Amazon #11
HzdaDeve Stainless Steel Nozzles 0.4MM Thread Hardened Nozzles High Flow Wear Resistant Nozzle Hotend Extruder Nozzles for Elegoo Neptune 4 Max/Neptune 4 Plus 3D Printer Replacement (5PCS)
Asin: B0CRGRRL9W | Model: 0.4mm nozzle | PartNumber: 0.4mm nozzle
Compatible Printer: Our Nozzles Are Compatible With Elegoo Neptune 4 Max, Neptune 4 Plus 3D Printer..
After-Sale Service: If There Are Any Questions, Just Contact Us Freely, And A Satisfactory Solution Will Be Provided Within 24 Hours.
High Speed: It's A Special Stainless Steel Design So The Print Head Heats Evenly. The Interior Of The Nozzle Is Smooth Without Burry, Which Not Only Reduces Air Resistance And Prevents The Filament From Jamming, But Supports High-Speed Printing..
Size: 0.4Mm Stainless Steel Nozzles With 1.75Mm Pla/Abs/Petg/Tpu/Wood Filament..
Features
- Material: MK8 hardened nozzles are made of high-quality stainless Steel. The nozzle is not easy to stick filament with high hardness, resistant to wear and tear.
- Size: 0.4MM stainless steel nozzles with 1.75mm PLA/ABS/PETG/TPU/Wood filament.
- Compatible Printer: Our nozzles are compatible with Elegoo Neptune 4 Max, Neptune 4 Plus 3D printer.
- High Speed: It's a special stainless steel design so the print head heats evenly. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing.
- After-Sale Service: If there are any questions, just contact us freely, and a satisfactory solution will be provided within 24 hours
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Hardened Nozzles for Neptune 4 Max
See On Amazon #12
HzdaDeve Magnetic Steel Plate for Mono 2 160X95MM Flexible Build Platform for Anycubic Photon Resin 3D Printer Accessories Replacement
Asin: B0CT5F2MN4 | Model: 160X95 PEI | PartNumber: 160X95 PEI
Special Material: It Has High Chromium Content, Easy To Bend And Clean. Much Easier To Remove Prints And Avoid Damage During The Process..
After Sale Service: If There Are Any Questions, Just Contact Us Freely, And A Satisfied Solution Will Be Provided Within 24 Hours..
High Quality: Good Corrosion Resistance And Rust Resistance. A Brushed Surface Provides Better Adhesion, Ensuring A Perfect Print..
Powerful Magnet: The Base Offers A Powerful Magnet, Ensuring A Perfect Fit With The Steel Plate. An Easy Lift Handle Makes It Easier To Remove The Steel Plate From The Magnetic Base..
Features
- Compatible Printer: The steel build plate is for Photon Mono 2 Resin 3D Printer.
- Powerful Magnet: The base offers a powerful magnet, ensuring a perfect fit with the steel plate. An easy lift handle makes it easier to remove the steel plate from the magnetic base.
- Special Material: It has high chromium content, easy to bend and clean. Much easier to remove prints and avoid damage during the process.
- High Quality: Good corrosion resistance and rust resistance. A brushed surface provides better adhesion, ensuring a perfect print.
- After Sale Service: If there are any questions, just contact us freely, and a satisfied solution will be provided within 24 hours.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve steel plate for Mono 2
See On Amazon #13
HzdaDeve 3D Printer Heater Cartridge 24V 40W and NTC 100 K 3950 Thermistor Kit for Anycubi Kobra Go Kobra Neo Hot End Parts (4 Pcs)
Asin: B0BMYRYCK5
Cartridge Heater Material: 304 Stainless Steel, Voltage: 24 V, Power: 40 W, Thermistor: Temperature Measurement Package, Head Diameter: 3 Mm, Head Length: 7 Mm..
Good Reliability, The Thermistor Can Be In Good Contact With The Heater Head, And Timely Feedback Data, The Recommended Temperature Of The Heater Does Not Exceed 300 Degrees..
Ntc 3950 100K Thermistor: For 3D Printer: Use Temp_Sensor 11 In Marlin Firmware; Resistance Value At 25°C = 100K..
The Package Includes 2Pcs 24V 40W 3D Printer Cartridge Heaters And 2Pcs Thermistors.The Heating Rods Are Available In Red And White, And Are Shipped Randomly..
Features
- Compatible with Anycubic Kobra Go Kobra Neo 3D printer hot end, Can not be used with Kobra Max, Kobra Plus, Kobra 3D printer.
- The package includes 2pcs 24v 40w 3D printer cartridge heaters and 2pcs thermistors.The heating rods are available in red and white, and are shipped randomly.
- Cartridge heater material: 304 stainless steel, voltage: 24 V, power: 40 W, thermistor: temperature measurement package, head diameter: 3 mm, head length: 7 mm.
- NTC 3950 100K thermistor: for 3D printer: use TEMP_SENSOR 11 in Marlin firmware; resistance value at 25 C = 100K.
- Good reliability, the thermistor can be in good contact with the heater head, and timely feedback data, the recommended temperature of the heater does not exceed 300 degrees.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #14
HzdaDeve Heater Cartridge for Elegoo Neptune 4 High Temperature Sensor Heating Tube 24V 50W Thermistor NTC 100K 3950 for Neptune 4/Pro 3D Printer Hotend Accessories Replacement (4 Pack)
Asin: B0CHHYF6ZR
Thermistor Rod Size: D3x10mm, Ntc 100K 3950. It Adopts White High-Temperature Cord Which Can Bear 300℃. The Cable Length With Terminal About 90Mm..
After Sale Service: If There Is Any Questions, Just Contact Us Freely, The Satisfied Solution Will Be Provided Within 24 Hours..
Package Includes: 2 Pack Heating Cartridge Element, 2 Pack Thermistor Temperature Sensor For Neptune 4 Printer Series..
Heating Rod Size: 24V 50W, D6x20mm, Cable Length With Terminal About 45Mm..
Features
- Notice: This heater cartridge and thermistor replacement is only compatible with Neptune 4, Neptune 4 Pro FDM 3D printer.
- Heating rod size: 24V 50W, D6X20mm, cable length with terminal about 45mm.
- Thermistor rod size: D3x10mm, NTC 100K 3950. It adopts white high-temperature cord which can bear 300 . The cable length with terminal about 90mm.
- Package Includes: 2 Pack heating cartridge element, 2 Pack thermistor temperature sensor for Neptune 4 Printer series.
- After Sale Service: If there is any questions, just contact us freely, the satisfied solution will be provided within 24 hours.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Thermistor for Neptune 4/Neptune 4 Pro
See On Amazon #15
HzdaDeve Hotend for Prusa I3 MK4 Print Head Heater Block 0.4MM Hardened Steel Nozzle 24V 40W Heating Cartridge Thermistor Silicone Cover Extruder Kit Printhead for 3D Printer Accessories Replacement
Asin: B0CXXCB9PP | Model: hardened hotend nozzle | PartNumber: hardened hotend nozzle
Tungsten Carbide Coated: It Has A Strong Adsorption Capacity, Effectively Preventing Molten Plastic From Sticking To The Nozzle..
Simple Installation: Remove The Old Hot End And Install The New Hotend To Start. (Heating Tube, Thermistor, Nozzle Etc Are Pre-Installed).
Filament Material: The Print Head For Prusa I3 Mk4 Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Premium Nozzle Quality: Mk6 Hardened Nozzles Are Made Of High-Quality Stainless Steel. The Nozzle Is Not Easy To Stick Filament With High Hardness, Resistant To Wear And Tear..
Package Included: 1 Set Hotend Kit (Heater Cartridge, Thermistor, Heat Block,Throat Tube, Nozzle, Silicone Cover).
Features
- Notice: This hotend kit replacement is compatible with Prusa I3 MK4 FDM 3D printer.
- Package Included: 1 set hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle, silicone cover)
- Tungsten Carbide Coated: It has a strong adsorption capacity, effectively preventing molten plastic from sticking to the nozzle.
- Premium Nozzle Quality: MK6 hardened nozzles are made of high-quality stainless Steel. The nozzle is not easy to stick filament with high hardness, resistant to wear and tear.
- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Filament material: The print head for Prusa I3 MK4 works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend kit replacement for Prusa I3 MK4
See On Amazon #16
HzdaDeve 24V 60W Heater Cartridge for Flsun V400 Delta Heating Tube NTC 100K Thermistor Temp Sensor Heating Rod Element for 3D Printer Extruder Hot End (4 Pack)
Asin: B0CZ6GHFH2 | Model: Heating Rod for V400 | PartNumber: Heating Rod for V400
Heater Head: 6X20mm; Cable Length: 1000Mm. Thermistor: Resistance Value At 25°C=100K.Cable Length: 900Mm.
After Sale Service: If There Is Any Questions, Just Contact Us Freely, The Satisfied Solution Will Be Provided Within 24 Hours..
24V 60W Upgraded Heater: The Maximum Temperature Increases From 280 To 300℃..
Package Includes: 2Pcs 24V 60W Heaters And 2Pcs Ntc 100K Thermistors For V400 Printer..
Features
- Compatible with Delta Flsun V400 Extruder Hotend etc.
- Package includes: 2pcs 24V 60W heaters and 2pcs ntc 100k thermistors for V400 printer.
- Heater head: 6x20mm; Cable length: 1000mm. Thermistor: Resistance value at 25 C=100K.Cable length: 900mm
- 24V 60W upgraded heater: The maximum temperature increases from 280 to 300 .
- After Sale Service: If there is any questions, just contact us freely, the satisfied solution will be provided within 24 hours.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve V400 thermistor
See On Amazon #17
HzdaDeve Textured PEI Build Sheet Smooth PEY Plate with Position Slot 235X235mm Spring Steel Print Bed Magnetic Base for Ender 3 V3 SE/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/SV05/SV06
Asin: B0CHYL9XYQ
Pei+Pey Design: One Side Is A Textured Pei Bed Which Presents The Frosted Sticker Surface With A Distinctive Frosted Touch. Another Side Is Smooth Pey Sheet Which Has A Pattern Of Stars And Dots That Will Shine Brightly. It Presents Different Patterns Under Different Intensities Of Light. What's More, Different Colors Will Be Left On The Printing Model. The Black Magnetic Sticker Can Work At A High Temperature Of 130°C..
It's Easy To Remove The Prints When The Pey Sheet 235X235 Cools Down To Around 40°C. If It's Stuck, Please Gently Bend The Build Plate To Pop It Off..
Simple Installation: Peel Off The Backing Paper And Stick It To The Bed, Finally Place The Pei Steel Plate On The Magnetic Sheet..
Package Includes: Pei And Pey Sheet + Adhesive Magnetic Sticker (Total 2 Packs), The Bed Sheet Size Is 235X235mm..
Features
- Compatible Printer: This 235X235mm PEY+PEI bed is compatible with K1/Ender 3 V3 SE/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2/Neptune 3 Pro/Neptune 4/Neptune 4 Pro 3D Printer.
- Package Includes: PEI and PEY sheet + adhesive magnetic sticker (total 2 packs), the bed sheet size is 235X235mm.
- PEI+PEY Design: One side is a textured PEI bed which presents the frosted sticker surface with a distinctive frosted touch. Another side is smooth PEY sheet which has a pattern of stars and dots that will shine brightly. It presents different patterns under different intensities of light. What's more, different colors will be left on the printing model. The black magnetic sticker can work at a high temperature of 130 C.
- Simple Installation: Peel off the backing paper and stick it to the bed, finally place the PEI steel plate on the magnetic sheet.
- It's easy to remove the prints when the PEY sheet 235X235 cools down to around 40 C. If it's stuck, please gently bend the build plate to pop it off.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve PEY Sheet
See On Amazon #18
HzdaDeve Ceramic Hotend for Creality K1/K1 Max/Ender 3 V3 KE Heating Block Hot End Kit High Thermal Conductivity Print Head Heater Block Temperature Heating Cartridge Thermistor 3D Printer Accessories
Asin: B0CRYK789F | Model: hot extruder for Creality K1 Max | PartNumber: hot extruder for Creality K1 Max
High Thermal Conductivity Uniform Heating: The Powerful 60W Ceramic Heating Ring Can Improve Heating Efficiency/More Uniform Heating/Faster Heat Transfer..
Small Size, Light Weight, Easy To Install, Plug And Play, Perfect For Sprite Extruders..
All-Metal Design: Heat Break High-Temperature Resistance Up To 300℃, More Powerful Overall Performance. It's Compatible With Filaments Like Pla/Abs/Petg/Tpu/Pp/Pc/Nylon Etc..
Package Included: 1 Set Hot End Replacement..
Features
- Notice: This ceramic hotend kit is only compatible with Creality Creality K1/K1 Max/Ender 3 V3 KE 3D FDM printer.
- Package Included: 1 set hot end replacement.
- High thermal conductivity uniform heating: The powerful 60W ceramic heating ring can improve heating efficiency/more uniform heating/faster heat transfer.
- All-metal design: Heat break High-Temperature Resistance Up to 300 , more powerful overall performance. It's compatible with filaments like PLA/ABS/PETG/TPU/PP/PC/Nylon etc.
- Small size, light weight, easy to install, plug and play, perfect for Sprite extruders.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend for Creality K1 Max
See On Amazon #19
HzdaDeve Textured PEI Sheet and Smooth PEY Build Plate 235X235mm Spring Steel Print Bed Magnetic Base for K1/Ender 3 V3 SE/Ender 3 V3 KE/Neptune 3 Pro/Neptune 4 Pro/Ender 3 S1 Pro/SV05/SV06/SV07 (PEY)
Asin: B0CHHS6MNL
Pei+Pey Design: One Side Is A Textured Pei Bed Which Presents The Frosted Sticker Surface With A Distinctive Frosted Touch. Another Side Is Smooth Pey Sheet Which Has A Pattern Of Stars And Dots That Will Shine Brightly. It Presents Different Patterns Under Different Intensities Of Light. What's More, Different Colors Will Be Left On The Printing Model. The Black Magnetic Sticker Can Work At A High Temperature Of 130°C..
It's Easy To Remove The Prints When The Pey Sheet 235X235 Cools Down To Around 40°C. If It's Stuck, Please Gently Bend The Build Plate To Pop It Off..
Simple Installation: Peel Off The Backing Paper And Stick It To The Bed, Finally Place The Pei Steel Plate On The Magnetic Sheet..
Package Includes: Pei And Pey Sheet + Adhesive Magnetic Sticker (Total 2 Packs), The Bed Sheet Size Is 235X235mm..
Features
- Compatible Printer: This 235X235mm PEY+PEI bed is compatible with Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2/SV05/SV06/SV07 3D Printer.
- Package Includes: PEI and PEY sheet + adhesive magnetic sticker (total 2 packs), the bed sheet size is 235X235mm.
- PEI+PEY Design: One side is a textured PEI bed which presents the frosted sticker surface with a distinctive frosted touch. Another side is smooth PEY sheet which has a pattern of stars and dots that will shine brightly. It presents different patterns under different intensities of light. What's more, different colors will be left on the printing model. The black magnetic sticker can work at a high temperature of 130 C.
- Simple Installation: Peel off the backing paper and stick it to the bed, finally place the PEI steel plate on the magnetic sheet.
- It's easy to remove the prints when the PEY sheet 235X235 cools down to around 40 C. If it's stuck, please gently bend the build plate to pop it off.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #20
HzdaDeve Open Timing Belt 8.5M 2GT 6MM Width Rubber Fiberglass with 6PCS Belt Buckles Clamps for Elegoo Neptune 4 Pro for Anycubic Kobra 2 Neo 3D Printer X Y Axis Accessories
Asin: B0CS37YGLV | Model: timing belt for 3d printer | PartNumber: timing belt for 3d printer
Suitable Size: Neptune 4 Pro Size: X:770Mm Y：756Mm; Kobra 2 Neo Size: X:810Mm Y：790Mm. Please Cut It Accordingly To Meet Your Need..
When Replacing The Timing Belt, The Belt Tension Must Be Reduced To A Minimum Before It Can Be Removed..
Glass Fiber Provides Belts With High Strength, Excellent Flexibility And High Tensile Strength, Without Lubrication, Reducing Maintenance Costs, Etc..
Package Includes: 2 Pack 850Mm Belt And 6 Pack Belt Buckles..
Features
- Material: Rubber; Width:6MM; Model:GT2; Length: 850MM for Neptune 4 Pro, Kobra 2 Neo FDM 3D printer.
- Package Includes: 2 Pack 850MM belt and 6 Pack belt buckles.
- Suitable Size: Neptune 4 Pro size: X:770mm Y 756mm; Kobra 2 Neo size: X:810mm Y 790mm. Please cut it accordingly to meet your need.
- Glass fiber provides belts with high strength, excellent flexibility and high tensile strength, without lubrication, reducing maintenance costs, etc.
- When replacing the timing belt, the belt tension must be reduced to a minimum before it can be removed.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve timing belt for Neptune 4 Pro
See On Amazon