ICTOLTOL - Buying Guide

Bestselling from ICTOLTOL on Amazon

1. Xgecu TL866II Plus Upgraded Xgecu T48 Programmer 19 Adapter Socket IC Tl866 Nand Nor Flash 24 93 25 ...
2. Xgecu TL866II Plus Upgraded Xgecu T48 Programmer 8 Adapters USB EPROM Flash BIOS chip Socket nand mc...
3. TQFP48 QFP48 to DIP48 0.5mm Pitch LQFP48 to DIP48 Programming Adapter MCU Test IC Socket Programmer ...
4. ICTOLTOL TSOP48 to DIP48 Socket Adapter nand nor Flash eeprom mcu for USB Programmer
5. Xgecu T56 EPROM Programmer 17 Adapters Xgecu TL866II Plus T48 top Version 56 Pin Drivers ISP Support...
6. xgecu T56 EEPROM Programmer 5 Adapters Xgecu TL866II Plus T48 top Version 56 Pin Drivers ISP Support...
7. Xgecu T56 EPROM Programmer 13 Adapters xgecu TL866II Plus T48 top Version 56 Pin Drivers ISP Support...
8. 16pcs Universal Adapter scoket for All Programmer Xgecu T48 T56 RT809H RT809F EZP MCU Test Socket Pr...
9. ICTOLTOL RT809H EMMC-Nand Flash Extremely Fast Universal chip Programmer Kit IC Programmer eprom Ada...

Features

• Product Introduction:Xgecu T48 programmer is the TL866ii plus programmer replacement, it's hardware parameters: 32-bit MCU with 120 MHz, 4-layer PCB design, USB 2.0 HS 480 MHz, volume: 10 x 6.5 x 2.8 cm (almost the same as TL86II) ,16 channel ISP total 56-channel. dedicated IO 56-channel high-speed high-voltage insulation, VCC voltage 1.8-6.5 V, 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable.
• Operating Systems:Before you buy, please check the chip modle whether in the support list, T48 support list please contact us Suitable for developers and maintenance personnel, can do small batch production for high capacity chips, support simultaneously working with 4 programmers on each computer. Support : Windows XP,2003,2008,Vista Win7 WIN8 WIN10 WIN11
• Support Nand Chips:With 40-pin industrial high-quality ZIF socket ), based on 32-bit MCU with 120MHz and 4-layer PCB design, this professional T48 programmer supports high-capacity NAND EMMC up to 256GB and programming speed is much higher.
• Speed Faster: Programming speed much faster. For example,w25q80, 3.5s+0.3s(program+verify) (30mhz); for spi nor flash 25q128, 30s+5.4s(p+v) (30mhz); for p_nand 29f1g08ab, 27s +17s(p+v); for p_nor flash en29lv320
• Support High-voltage Chips: such as 27cxxx series,vpp maximum up to 25v
• See more on Amazon...

Features

• Note: Xgecu tl866ii plus was stop produced,Xgecu T48 programmer is the TL866ii plus programmer replacement, the package you receive is Xgecu T48,not TL866II PLUS, t48 hardware parameters: 32-bit MCU with 120 MHz, 4-layer PCB design, USB 2.0 HS 480 MHz, volume: 10 x 6.5 x 2.8 cm (almost the same as TL86II) ,16 channel ISP total 56-channel. dedicated IO 56-channel high-speed high-voltage insulation, VCC voltage 1.8-6.5 V, 64 levels adjustable, VPP voltage 9V-25V 64 levels adjustable.Power consumption: 5V <500MA. Static power consumption: 60 mA. Without external power supply interface
• Before you buy, please check the chip modle whether in the support list, T48 support list check here :www.autoelectric.cn/MiniPro/T48_List.txt;Suitable for developers and maintenance personnel, can do small batch production for high capacity chips, support simultaneously working with 4 programmers on each computer.
• With 40-pin industrial high-quality ZIF socket (pluggable/replaceable), the latest model T48 (TL866-3G) programmer is the improvement of TL866II Plus programmer. Based on 32-bit MCU with 120MHz and 4-layer PCB design, this professional T48 programmer supports high-capacity NAND EMMC up to 256GB and programming speed is much higher.
• Suppport high-voltage chips, VPP maximum up to 25V, that is what TL866II cannot achieve. Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small (size is almost the same as TL866II), code runs much faster, support multilanguage menu (English, Chinese, Russian, Polish, German, Spanish, Portuguese, Turkish, Czech, Italian)
• Package include:1*T48 programmer,1*USB Cable, 1*qfp32-100 adapter 1*SOP8-DIP8 150mil adapter 1*SOP8-DIP8 200-208mil adapter 1*PLCC44-DIP44 adapter 1*PLCC32-DIP32 adapter 1*wson8 (6*5 /8*6 )Adapter 1*SOP8/msop8/tssop8/ssop8/SOP16-DIP16 simple adapter 1*PLCC IC extractor
• See more on Amazon...

Features

• Package Include: 1pcs TQFP48 QFP48 to DIP48 programmer adapter
• Has a longer service life, suitable for all TQFP48 LQFP48 QFP48 chip.
• See more on Amazon...

Features

• This is a brand new TSOP48 to DIP48 socket adapter which easily allows you to convert your 48-pin thin small-outline packages [TSOP] to 48-pin dual in-line [DIP] packages in programmers. Specifications: Socket type: TSOP48 open-top style, square socket Bottom type: DIP48 [2 rows of 24 pins] Dimensions: 62.75 x 33.23 x 32.64mm Pin length: 6.04m for chip size: L= 20mm,W = 12~14mm Brand new and unused
• See more on Amazon...

Features

• Product Introduction:T56 programmer parameters (1). 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB 2.0 HS 480MHz transmission (2). 56-pin powerful pindrivers IO design. All pins have a maximum operating frequency of 50 MHz and high reliability. (3) Stable and reliable 8-pin in-circuit programming ISP interface, the wire length is more than 30 cm, and it can communicate reliably at 25 MHZ. 25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ.
• Product Support:XGecu T56 Programmer support for Nor Flash / NAND Flash / EMMC TSOP48 / TSOP56 / BGA48 / BGA63 / BGA64 / BGA100 / BGA153 / BGA162 / BGA169 / BGA2222 / BGA222222 / BGA22222 1.24. 25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, Flash memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc. NAND EMMC supports maximum capacity up to 256G.
• Speed Faster:T56 programmer meets or exceeds the speed of most specialised programmers. Stability and reliability of the programmer are the most important.
• Support Lower Voltage Chips:T56 programmer can directly support a minimum of 1.20V programming voltage, some non-technical sellers configure the T56 programmer with a 1.8V adapter, which is a completely useless accessory and a waste of money.
• Please Note:Before buying, make sure the chip models you want to program are in the support list. Please contact us for checking.
• See more on Amazon...

Features

• Product Introduction:T56 programmer parameters (1). 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB 2.0 HS 480MHz transmission (2). 56-pin powerful pindrivers IO design. All pins have a maximum operating frequency of 50 MHz and high reliability. (3) Stable and reliable 8-pin in-circuit programming ISP interface, the wire length is more than 30 cm, and it can communicate reliably at 25 MHZ. 25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ.
• Product Support:XGecu T56 Programmer support for Nor Flash / NAND Flash / EMMC TSOP48 / TSOP56 / BGA48 / BGA63 / BGA64 / BGA100 / BGA153 / BGA162 / BGA169 / BGA2222 / BGA222222 / BGA22222 1.24. 25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, Flash memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc. NAND EMMC supports maximum capacity up to 256G.
• Speed Faster:T56 programmer meets or exceeds the speed of most specialised programmers. Stability and reliability of the programmer are the most important.
• Support Lower Voltage Chips:T56 programmer can directly support a minimum of 1.20V programming voltage, some non-technical sellers configure the T56 programmer with a 1.8V adapter, which is a completely useless accessory and a waste of money.
• Please Note:Before buying, make sure the chip models you want to program are in the support list. Please contact us for checking.
• See more on Amazon...

Features

• XGecu T56 Universal Programmer 56 Pin Drivers ICs for Nor Flash / NAND Flash / EMMC TSOP48 / TSOP56 / BGA48 / BGA63 / BGA64 / BGA100 / BGA153 / BGA162 / BGA169 / BGA2222 / BGA222222 / BGA22222 1.24. 25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, Flash memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc. NAND EMMC supports maximum capacity up to 256G
• Please note: before buying, make sure the chip models you want to program are in the support list. Please contact us for checking.
• T56 programmer parameters (1). 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB 2.0 HS 480MHz transmission (2). 56-pin powerful pindrivers IO design. All pins have a maximum operating frequency of 50 MHz and high reliability. (3) Stable and reliable 8-pin in-circuit programming ISP interface, the wire length is more than 30 cm, and it can communicate reliably at 25 MHZ. 25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ.
• T56 programmer can directly support a minimum of 1.20V programming voltage, some non-technical sellers configure the T56 programmer with a 1.8V adapter, which is a completely useless accessory and a waste of money.
• High-performance with optimal design of software and hardware for high-capacity chips, the T56 programmer meets or exceeds the speed of most specialised programmers. Stability and reliability of the programmer are the most important. An excellent programmer. If the main controller of the programmer can work at a higher speed, its stability and speed determined by the highest operating frequency supported by the pins. The higher frequency, the better of anti-interference ability.
• See more on Amazon...

Features

• High quality and durable. Universal sockets Fit for all programmer in market
• Tested before shipping
• Easy to use
• Adapter with Gold-plated pin,better than sliver Pin
• Packge include: 1*SOP28-DIP28 300mil adapter Gold Plating 1*SOP8-DIP8 150mil adapter Gold Plating 1*SOP8-DIP8 200-208mil adapter Gold Plating 1*PLCC44-DIP44 adapter 1*PLCC32-DIP32 adapter 1*SOP20-DIP20(200-208mil)(golden) 1*SOP8/msop8/tssop8/ssop8/SOP16-DIP16 simple adapter 1*TSSOP28-DIP28(golden) 1*SOP16-DIP16(105mil)(golden) 1*PLCC28-DIP24 1*PLCC20-DIP20 1*MSSOP8 and SOP16 1*Single board SOIC8-DIP8 1*TQFP32-64pin(0.8mm) and TQFP32-100 PIN(0.5 mm),SOP8-28 BOARD*1,QFN8 BOARD*1
• See more on Amazon...

Features

• Package include: 1 * RT809H universal programmer 1 * usb cable 1*TSOP48 socket,1 * vga cable 1*TSOP/VSOP/SSOP Adapter Board,SOP8-DIP8 200-208MIL SOCKET,SOP8-DIP8 150MIL SOCKET
• RT809H support list: LCD TV, EMMC NAND FLASH POS, car navigation, car audio, mobile phone full font library T8 series / KB90 series / MEC16 series / NPCE series notebook EC read and write, unlimited capacity. TSOP48 TSOP56 pin TOP8-16 feet LCD TV, LCD Notebook Motherboard BIOS Notebook EC LCD Tablet Read/Write, Home Appliance DVD Memory SPD DDC/EDID Read & Write, Logic Board Read & Write, Serial Print Information, HiFi Player Read & Write, Network Set-top Box
• Support 24/25/93/95 series serial SPIFLASH, EEPROM offline reading and writing,Support 26/27/28/29/30/39/49/50 series NOR FLASH/PROM read and write,Support LCD/LED flat-panel TV, display mainstream solution chip ISP online reading and writing
• Support notebook computer motherboard 18/KB90/NPCE/MEC16 series EC chip read and write,Support automatic identification and offline reading and writing of TSOP48 and BGA package NAND FLASH parameters,Support online and offline EMMC identification, BOOT/USER/RPMB/GPP area read and write
• Support UPTO 64GB NAND FLASH Short description: 48-pins powerful pindrivers, no adapter required for any DIL devices ISP connector for in-circuit programming VGA port to read and write LCD TV-MONITORS without disassembly . HDMI port to read and write LCD TV-MONITORS without disassembly . Connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
• See more on Amazon...