Iteq - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid
Asin: B076SC377J | Model: BFT1001 | PartNumber: BFT1001 | Ean: 0607111538110 | UPC: 607111538110
Calibrated For Cars Using Dot4 And Dot3 Brake Fluids (But Dot3 Is Almost Replaced By Dot4 Because Dot4 Has Better Performance).
Ce And Rohs Approved. Protective Cap Included.Takes 1 X Aaa/1.5V Battery (Not Included).
Only Takes Seconds To Know The Results,Very Easy To Use.
The Led Indicators Will Show Percentage Of Water In The Brake Fluid With 3 Colors Green Yellow And Red.
Features
- Test the car brake fluid quality quickly to check whether it s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident
- The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red
- Calibrated for cars using DOT4 and DOT3 brake fluids (But DOT3 is almost replaced by DOT4 because DOT4 has better performance)
- Only takes seconds to know the results,very easy to use
- CE and RoHS approved. Protective cap included.Takes 1 x AAA/1.5V battery (not included)
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.59 x 5.91 x 0.59 Inches | Weight: 0.09 pounds
See On Amazon #2
ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover tool and Thread Chaser Set
Asin: B07P24HCY1 | Model: 13 | PartNumber: 13 | Ean: 0607111538424 | UPC: 607111538424
6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 3/8” And 1/2” Drive Ends Can Be Used With Ratchet Or Breaker Bar.
Set Including: 1-Pc 3/8” Dr. Extra Deep Broach Socket (3-1/8” Long), 1-Pc 3/8” Dr. Low-Profile Crowfoot Socket Wrench (1-1/4” Long), 1-Pc 1/2” Dr. Offset Crowfoot Socket Wrench (1-15/16” Long), 1-Pc M18 X 1.5Mm And 1-Pc M12 X 1.25Mm Thread Chasers With 3/8” Drive To Clean And Repair Damaged Threads.
Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires.
3 Types Of Universal Socket Wrenchs Cover Various Situations Of Oxygen Sensor Location.
Features
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
- 6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 3/8 and 1/2 drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Set Including: 1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.87 x 3.15 x 0.87 Inches | Weight: 1.81 Pounds
See On Amazon #3
ITEQ Car Sound Deadening Roller Sound Proof Insulation Tool for Auto Noise Roller Car Sound Deadener Application Installation Tool Rolling Wheel Interior Accessories
Asin: B082J3RSDY | Model: IT019 | PartNumber: IT019 | Ean: 0607111538578 | UPC: 607111538578
3 Sizes Of Rollers Apply To Different Access And Radii. With The Large One You Can Roll Longer Flat Sections For Time Saving, And Get In Tight Corners Such As Curves, Center Console And Pillar Spots With The Smaller Ones.
One Year Warranty! 100% Money Back Or Replace Anytime In 6 Months. Any Question, Please Feel Free To Contact Us!.
Package Including 3 Sizes Of Rollers: 1Pc Of 0.24Inch (6Mm) Roller, 1Pc Of 0.79Inch (20Mm) Roller And 1Pc Of 1.57Inch (40Mm) Roller.
It’S A Perfect Tool Set For All Types Of Sound Deadening Mat, To Minimize Air Bubbles, Perfect For Installing Car Insulation Materials. It's Also A Perfect Carpet Roller, Seam Roller, Wallpaper Roller, Tape Roller And Adhesive Roller.
Features
- ITEQ car sound deadening roller is constructed by high-quality metal wheel with a riveted steel roller bracket. The wheel has fine flat topping ridges which can minimize the air bubbles and get the best adhesion of deadening materials
- It s a perfect tool set for all types of sound deadening mat, to minimize air bubbles, perfect for installing car insulation materials. It's also a perfect carpet roller, seam roller, wallpaper roller, tape roller and adhesive roller
- 3 sizes of rollers apply to different access and radii. With the large one you can roll longer flat sections for time saving, and get in tight corners such as curves, center console and pillar spots with the smaller ones
- Package including 3 sizes of rollers: 1pc of 0.24inch (6mm) roller, 1pc of 0.79inch (20mm) roller and 1pc of 1.57inch (40mm) roller
- One year warranty! 100% money back or replace anytime in 6 months. Any question, please feel free to contact us!
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.57 x 7.87 x 4.53 Inches
See On Amazon #4
ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions
Asin: B07C31KXRZ | Model: 8542041409 | PartNumber: 8542041409 | Ean: 0607111538257 | UPC: 607111538257
Set Of 8 Gauges Denoting 3 Thickness Levels: Green, Yellow & Red, Which Indentify If The Brakes Are Still Good (Green), Should Be Serviced (Yellow) And Must Be Serviced (Red).
Constructed Out Of Steel With Powder Coat Riveted Together For Extra Strength And Durability.
Each Gauge Blade Has Both Metric & Sae: 3 Green (12, 10, 8 Mm & 0.4724, 0.3937, 0.3150 Inch), 3 Yellow (6, 5, 4 Mm & 0.2362, 0.1969, 0.1575 Inch), And 2 Red (3, 2 Mm & 0.1181, 0.0787 Inch).
The Brake Measuring Tool Can Be Used To Quickly Gauge Any Vehicle Including Trucks And Heavy Duty Transportation.
Features
- Color coded brake pad gauge to identify thickness level ranges for brake lining inspection
- The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation
- Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red)
- Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch)
- Constructed out of steel with powder coat riveted together for extra strength and durability
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.87 x 5.12 x 0.47 Inches | Weight: 0.33 Pounds
See On Amazon #5
ITEQ Protective Wheel Lug Nut Socket for Mercedes Benz with 17mm Convex, Flower Head Lug Nut Socket
Asin: B07SZ1HRW1 | Model: IT013 | PartNumber: IT013 | Ean: 0607111538486 | UPC: 607111538486
85Mm Long - 85Mm (3 11/32-Inch) Long Socket Can Reach Lug Nuts Seated In Deep Recesses.
Fits All 1/2" Drive Socket Wrenches, Tools And Air Tools.
Features A Red, Protective Sleeve Around The Socket Which Is Designed To Prevent Scratching And Marring Of Your Wheels During Maintenance.
Compatible With 2007+ Mercedes Cl-Class, Gl-Class, Glk-Class, Gls-Class, And S-Class Vehicles With 17Mm Convex, “Flower Head” Lug Bolts.
Features
- Special 1/2" drive 17mm wheel bolt impact socket for safe and effective removal of the Convex ("flower head") lug bolts on late Mercedes models, BMW, Audi, Mini Cooper
- Compatible with 2007+ Mercedes CL-Class, GL-Class, GLK-Class, GLS-Class, and S-Class vehicles with 17mm convex, flower head lug bolts
- 85mm LONG - 85mm (3 11/32-inch) long socket can reach lug nuts seated in deep recesses
- Features a red, protective sleeve around the socket which is designed to prevent scratching and marring of your wheels during maintenance
- Fits all 1/2 drive socket wrenches, tools and air tools
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.18 x 3.35 x 1.18 Inches | Weight: 0.47 pounds
See On Amazon #6
ITEQ Automotive Brake Caliper Hangers Brake Caliper Hook with Rubber Tips Set of 2
Asin: B082HYXN2C | Ean: 0607111538561 | UPC: 607111538561
Designed With Rubber Tips At Both Ends Of The Caliper Hangers To Keep The Scratching Damage Away Perfectly From The Painted Suspension Components.
Including 2 Iteq Brake Caliper Hangers.
Perfect Tool To Keep Brake Calipers Out Of The Way And Reduce Possible Damage To Calipers, Brake Hoses, Brake Lines And Other Parts.
The Caliper Hooks Are Color Coated In Green, Which Will Never Be Misplacing Or Left Behind After The Job Done.
Features
- ITEQ Brake Caliper Hangers are designed to hold your brake calipers during brake changes, wheel bearing, axle shaft, and suspension service
- The caliper hooks are color coated in green, which will never be misplacing or left behind after the job done
- Designed with rubber tips at both ends of the caliper hangers to keep the scratching damage away perfectly from the painted suspension components
- Perfect tool to keep brake calipers out of the way and reduce possible damage to calipers, brake hoses, brake lines and other parts
- Including 2 ITEQ brake caliper hangers
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 2.36 x 7.48 x 3.54 Inches | Weight: 0.33 pounds
See On Amazon #7
ITEQ Tire Patch Roller Wooden Handle 1 1/2" Dia Tire Repair Tool (6mm)
Asin: B07D3MF3NX | Model: IT009 | PartNumber: IT009 | Ean: 0607111538295 | UPC: 607111538295
Wooden Material Handle Makes It Durable , Portable And Comfortable To Use.
Handle Size : 115 X 28Mm / 4.5 X 1.18(L*D).
Wheel Size : 38 X 6Mm/1.5 X 0.36" (D*T).
Defined Teeth - Deep-Cut And Clearly Defined Gear-Like Teeth Provide More Penetrating Pressure To Remove Trapped Air.
Features
- Used for rolling tire and tube patches adhere fully during repairs, ideal tire repair tool for cars, motorcycles and bicycles
- DEFINED TEETH - Deep-cut and clearly defined gear-like teeth provide more penetrating pressure to remove trapped air
- Wooden material handle makes it durable , portable and comfortable to use
- Wheel Size : 38 x 6mm/1.5 x 0.36 (D*T)
- Handle Size : 115 x 28mm / 4.5 x 1.18(L*D)
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.10 x 7.48 x 1.50 Inches | Weight: 0.31 Pounds
See On Amazon #8
ITEQ 2 Pcs Mercedes Benz Instrument Cluster Removal Pulling Hooks Tool
Asin: B07R6F1JGG | Model: IT011 | PartNumber: IT011 | Ean: 0607111538462 | UPC: 607111538462
A Must-Have Tool Set For Every Technician Working On Mercedes Cars Or Garage That Works On Them.
Black Plastic T-Handle Design For Easy Grip, The Package Includes Two Pieces Of Pulling Hooks.
With This Removal Hooks You Can Safely Remove The Instrument Cluster And Avoiding Subsequent Damage To Your Mercedes.
Features
- The ITEQ Pulling Hooks Tool Set is specially designed for removing instrument cluster out the dashboard of Mercedes Benz
- With this removal hooks you can safely remove the Instrument Cluster and avoiding subsequent damage to your Mercedes
- A must-have tool set for every technician working on Mercedes cars or garage that works on them
- Black plastic T-handle design for easy grip, the package Includes two pieces of Pulling Hooks
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.79 x 7.48 x 3.54 Inches
See On Amazon #9
ITEQ Strut Spreader Socket, Shock Absorber Ram Dismantle Tool, Strut Socket for Audi, VW, BMW, Mini, Ford
Asin: B07KK8ZQD1 | Model: 13 | PartNumber: 13 | Ean: 0607111538394 | UPC: 607111538394
1/2" Dr. Pry Bit Socket, 5 X 8 Millimeters Oval Bit End.
Suitable For Removal And Installation Of Strut Legs On Most Vw, Audi, Ford, Bmw, Peugeot, Renault, Seat, Skoda, Japanese Vehicles.
Heavy-Duty Construction Allows For Strength And Durability.
Most Comman Would Be Changing / Replacing Struts, Coil Spring, Or The Entire Strut Assembly. It Allows You To Spread The Housing Where It Is Clamped On So That The Strut.
Features
- Offers service on suspension strut housing socket, remove suspension strut from wheel bearing housing. It would also be useful when servicing the wheel bearing
- Most comman would be changing / replacing struts, coil spring, or the entire strut assembly. It allows you to spread the housing where it is clamped on so that the strut
- 1/2 Dr. Pry Bit socket, 5 x 8 millimeters oval bit end
- Heavy-Duty Construction Allows for Strength and Durability
- Suitable for removal and installation of strut legs on most VW, Audi, Ford, BMW, Peugeot, Renault, Seat, Skoda, Japanese vehicles
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.87 x 1.97 x 0.87 Inches
See On Amazon #10
ITEQ Ignition Lock Switch Sleeve Release Socket, Mercedes EZS Removal Tool
Asin: B07HS1R18V | Model: IT012 | PartNumber: IT012 | Ean: 0607111538370 | UPC: 607111538370
A Must-Have-Tool For Mercedes Mechanic, It Will Perfectly Help You Do The Ignition Lock Removing Job.
Size: 80X34mm / 3.15X1.34" (D*T).
Material: Anodized Aluminum, Won't Bring Any Harm To The Interior Of The Car.
Applicated In: C300, W129, W140, W202, W210, W220, W203, W209, W211, W204 Chassis.
Features
- Specifically designed to loosen and tighten the ring (rosette) that secures the ignition switch in Mercedes
- Applicated in: C300, W129, W140, W202, W210, W220, W203, W209, W211, W204 chassis
- A must-have-tool for Mercedes mechanic, it will perfectly help you do the ignition lock removing job
- Material: Anodized Aluminum, won't bring any harm to the interior of the car
- Size: 80x34mm / 3.15x1.34 (D*T)
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.38 x 3.15 x 1.38 Inches | Weight: 0.33 Pounds
See On Amazon #11
ITEQ 7/8 Inch (22 mm) 6-Point by 1/2 Inch Drive Offset Oxygen Sensor Socket with Wide Side Cutout for Preventing Damage to Wires
Asin: B08MQT81K5 | Ean: 0607111538691 | UPC: 607111538691
The Oxygen Sensor Socket's Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires.
Suitable For Oxygen Sensors Found On Most Modern Vehicles.
Made Of High-Quality Chrome Vanadium Steel For Extra Strength And Durability.
The 6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 1/2” Drive And 7/8” Ends Can Be Used With Both Ratchet And Torque Wrench.
Features
- Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines
- The 6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 1/2 drive and 7/8 ends can be used with both ratchet and torque wrench
- The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Made of high-quality Chrome vanadium steel for extra strength and durability
- Suitable for oxygen sensors found on most modern vehicles
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.18 x 3.54 x 1.18 Inches
See On Amazon #12
ITEQ Oil Filter Plug Tool for 2013-2019 Dodge Ram Cummins
Asin: B092DHSRKF | Ean: 0607111538752 | UPC: 607111538752
The Iteq Oil Filter Plug Tool Is Compatible With Dodge Ram 2500 3500 Cummins 2013, 2014, 2015, 2016, 2017, 2018, 2019 5.7L 6.4L 6.7L Turbo Diesel Engines.
The Iteq Oil Filter Plug Is A Must Tool To Hold All The Oil In The Filter Which Makes Removing And Installing Full Oil Filters A Breeze, No Cleanup Job!.
The T-Handle Design Makes It Easy To Install Or Remove The Oil Filter, And Gives You A Secure Grip When Reaching Into Hard-To-Get Space In The Engine Compartment.
Thread The Tool Into The Top Of The Filter Until It’S Sealed In Place, Keeping Oil Inside The Filter Regardless Of What Angle You Have To Hold It At To Get It In Or Out Of The Engine Compartment.
Features
- This ITEQ oil filter plug cap off tool seals oil in the filter during removal and installation, avoiding messy spills and making oil changes easier
- Thread the tool into the top of the filter until it s sealed in place, keeping oil inside the filter regardless of what angle you have to hold it at to get it in or out of the engine compartment
- The ITEQ oil filter plug tool is compatible with Dodge Ram 2500 3500 Cummins 2013, 2014, 2015, 2016, 2017, 2018, 2019 5.7L 6.4L 6.7L Turbo Diesel Engines
- The t-handle design makes it easy to install or remove the oil filter, and gives you a secure grip when reaching into hard-to-get space in the engine compartment
- The ITEQ oil filter plug is a must tool to hold all the oil in the filter which makes removing and installing full oil filters a breeze, no cleanup job!
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 2.76 x 2.76 x 1.89 Inches | Weight: 0.11 Pounds
See On Amazon #13
ITEQ 7PCS AC Fuel Line Disconnect Tool Set for Most Ford/GM/Chrysler/Mazda,Includes 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch Transmission Oil Cooler Line Quick Disconnect Kit Fuel Line Removal Tool
Asin: B09276V9GV | Ean: 0607111538745 | UPC: 607111538745
7 Sizes Of Disconnect Tools Are Compatible With Ford, Gm, Mazda, Chrysler And More Other Vehicles With Automatic Transmission Lines.
Marked With Permanent Labels (Sae & Metric) For Easy Identification, One-Handed Operation With Easy-Grasp End And Unique Offset Design To Access Hard-To-Reach Confined Or Obstructed Areas.
Constructed From Hard Plastic For Strength And Longevity That Resists Rust And Corrosion, Spring-Loaded Design Allows For Easy Opening And Closing When Pressure Is Released.
The Tool Set Offers A Wide Range Of Tool Sizes To Help You Quickly Remove Fittings On Fuel Line, Ac Cooling Line And Heater Line, Transmission Oil Cooler Line And Other Quick Disconnect Couplings.
Features
- The ITEQ AC fuel line disconnect tool kit includes 7 types of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch
- The tool set offers a wide range of tool sizes to help you quickly remove fittings on Fuel line, AC cooling line and heater line, transmission oil cooler line and other quick disconnect couplings
- 7 sizes of disconnect tools are compatible with Ford, GM, Mazda, Chrysler and more other vehicles with automatic transmission lines
- Constructed from hard plastic for strength and longevity that resists rust and corrosion, Spring-loaded design allows for easy opening and closing when pressure is released
- Marked with permanent labels (SAE & Metric) for easy identification, one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.98 x 3.15 x 1.18 Inches | Weight: 0.11 Pounds
See On Amazon #14
ITEQ 6PCS Camshaft Phaser Timing Chain Tools for VW Jeep Chrysler Dodge 3.6L Pentastar 10200A+10202 10369 Cam Locking Tool
Asin: B07Z5CJGQY | Ean: 0607111538547 | UPC: 607111538547
10200A Is Used As Wedges To Loosen The Tension On The Timing Chains During Camshaft Phaser Service Procedures On Routan 3.6 Liter Engine.
Some 2011 Models May Also Require 10369A, Depending On The Size Of Bolt In The Front Cover Tightening Sequence On The Right Bank (Cylinder Head Closest To Firewall). If That Bolt Head Is 13Mm You’Ll Need 10369A, 2012 And Newer Models Require 10369A.
10200A-1 Is Used On Driver’S Side And 10200A-2 Is Used On Passenger’S Side.
10202A-1 Is Applicated On The Right Bank And 10202A-2 Is Applicated On The Left Bank.
Features
- 10202A is used to hold the camshaft phaser while performing the loosening and tightening of the oil control valves during service on Routan 3.6 Liter engine
- 10202A-1 is applicated on the right bank and 10202A-2 is applicated on the left bank
- 10200A is used as wedges to loosen the tension on the timing chains during camshaft phaser service procedures on Routan 3.6 Liter engine
- 10200A-1 is used on Driver s side and 10200A-2 is used on passenger s side
- Some 2011 models may also require 10369A, depending on the size of bolt in the front cover tightening sequence on the right bank (cylinder head closest to firewall). If that bolt head is 13MM you ll need 10369A, 2012 and newer models require 10369A
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.31 x 9.84 x 3.46 Inches | Weight: 1.08 pounds
See On Amazon #15
ITEQ 14mm Spark Plug Gap Tool with Feeler Gauge, Spark Plug Gapping Tool, Spark Plug Gap Adjusting Tool for 14mm Plugs, Spark Plug Measuring Tool
Asin: B09YDLS5CJ | Ean: 0607111538844 | UPC: 607111538844
The Knob Design Makes It Easier And More Precise For The Spark Plug Adjusting Which Reduces Error And Electrode Damage Effectively.
No More Misfires Or Error Codes Due To The Bad Or Inaccurate Gap On Your Spark Plugs.
This Spark Plug Gap Tool Set Is Perfect For Spark Plugs Diy. Adjust The Gap More Precisely And Fast With The Feeler Gauge.
Used For Most Of 14Mm Threaded Spark Plugs Except Short Reach Plugs. Adjust The Spark Plug Gap, Improve Your Engine Performance.
Features
- Coming with a 14mm spark plug gap tool and a 32 blades feeler gauge (0.04-0.88mm/0.0016 -0.035 )
- Used for most of 14mm threaded spark plugs except short reach plugs. Adjust the spark plug gap, improve your engine performance
- The knob design makes it easier and more precise for the spark plug adjusting which reduces error and electrode damage effectively
- This spark plug gap tool set is perfect for spark plugs DIY. Adjust the gap more precisely and fast with the feeler gauge
- No more misfires or error codes due to the bad or inaccurate gap on your spark plugs
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.38 x 2.09 x 1.38 Inches
See On Amazon #16
ITEQ 3/8 Inch Drive by 7/8 Inch Offset Oxygen Sensor Socket, Wire Gate Accesses Sensor from The Side
Asin: B08MQVJVL1 | Ean: 0607111538714 | UPC: 607111538714
The Oxygen Sensor Socket's Special Side Cutout Design Allows Easy Access To Oxygen Sensors From Any Section And Prevents Damage To Wires.
Suitable For Oxygen Sensors Found On Most Modern Vehicles.
Made Of High-Quality Chrome Vanadium Steel For Extra Strength And Durability.
The 6-Point 7/8” (22Mm) Socket Opening Fits All Hexagon Oxygen Sensor, Common 3/8” Drive And 7/8” Ends Can Be Used With Both Ratchet And Torque Wrench.
Features
- Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines
- The 6-point 7/8 (22mm) socket opening fits all hexagon oxygen sensor, common 3/8 drive and 7/8 ends can be used with both ratchet and torque wrench
- The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Made of high-quality Chrome vanadium steel for extra strength and durability
- Suitable for oxygen sensors found on most modern vehicles
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.18 x 2.17 x 1.26 Inches | Weight: 0.32 Pounds
See On Amazon #17
ITEQ Tire Tread Depth Gauge, Smart Color Coded Tire Gauge, Tire Tread Depth Accurate Measurement Tool
Asin: B07D9D1G2X | Model: 8542044471 | PartNumber: 8542044471 | Ean: 0607111538301 | UPC: 607111538301
Safe Tire: Green Range From 6/32 – 1 Inch; Warning Tire: Yellow Range From 3/32 - 6/32Nds; Dangerous Tire: Red Range From 0 - 3/32Nds, Needed To Be Replaced.
Comes With A Pocket Clip, Easy To Carry The Tire Tread Depth Gauge And Convenient For Use.
Suitable For Car, Van, Truck, Motorcycle, Automobiles And Any Passenger Vehicle, Stick The Metal Head Into The Tread Of Tyres, Press The Black Flate Edge Onto The Edge Of The Tire And Read The Depth.
Calibrated From 0 To 1 Inch In 32Nds, 3 Color Markings Indicate Fast And Accurate Measurement To Tyre Tread Depth.
Features
- The ITEQ Tire Tread Depth Gauge is used to accurately measure the degree wear of tire surfaces, which helps you regularly monitor tire tread levels of your car and make the driving safer
- Calibrated from 0 to 1 inch in 32nds, 3 color markings indicate fast and accurate measurement to tyre tread depth
- Safe Tire: green range from 6/32 1 inch; Warning tire: yellow range from 3/32 - 6/32nds; Dangerous Tire: red range from 0 - 3/32nds, needed to be replaced
- Suitable for car, van, truck, motorcycle, automobiles and any passenger vehicle, stick the metal head into the tread of tyres, press the black flate edge onto the edge of the tire and read the depth
- Comes with a pocket clip, easy to carry the tire tread depth gauge and convenient for use
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.59 x 3.54 x 0.98 Inches | Weight: 0.02 pounds
See On Amazon #18
ITEQ Rear Air Condition Vent Cover Trim for 2023 Mercedes-Benz GLC X254, Rear Center Console Air Vent Trim Cover Protector (Brown)
Asin: B0CG4TKS9P | Model: IT031-1 | PartNumber: IT031-1 | Ean: 0607111538868 | UPC: 607111538868
Perfect Decoration: Made Of High-Quality Abs Plastic In Brown, Perfect Match With The Original Car Inner Color, A Decorating Rear Air Condition Trim Protector To Upgrade The Interior Looking.
Package Included: 1 X Iteq Rear Ac Vent Outlet Cover Trim Brown Color.
Easy Installation: Self-Adhesive Design Makes It Very Easy To Install And Will Not Damage The Frame Surface When You Remove It If Need To.
Full Protection: Protect The Car Rear Ac Vent Outlet Frame Surface From Scratches And Kicks, Always Keep It Clean And New, Prevent The Interior From Fraying And Aging.
Features
- Custom Fitment: This rear AC vent outlet cover trim is compatible with 2023 Mercedes-Benz GLC X254, including GLC 200, GLC 220d, GLC 300, GLC 300e, GLC 300de, GLC 400e, GLC 260L and GLC 360L
- Full Protection: Protect the car rear AC vent outlet frame surface from scratches and kicks, always keep it clean and new, prevent the interior from fraying and aging
- Perfect Decoration: Made of high-quality ABS plastic in brown, perfect match with the original car inner color, a decorating rear air condition trim protector to upgrade the interior looking
- Easy Installation: Self-adhesive design makes it very easy to install and will not damage the frame surface when you remove it if need to
- Package Included: 1 x ITEQ Rear AC Vent Outlet Cover Trim Brown Color
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 4.06 x 12.60 x 8.27 Inches | Weight: 0.33 pounds
Warranty: 90 days warranty from the date of purchase.
See On Amazon #19
ITEQ Power Circuit Probe Tester 6V-24V DC Test Light Short Circuit Tester Component Activation Electrical Tester Polarity Identify Continuity Tester with LED Light, Long Test Lead, Overload Protection
Asin: B0CYGLY3R2 | Model: IT004 | PartNumber: IT004 | Ean: 0607111538769 | UPC: 607111538769
Power Circuit Probe Tester Could Activate Components In And Out Of The Vehicle’S Electrical System, Test And Check The Components If Defective Or Not, Or If Rating Current Of Component Is Higher Than That Of The Circuit Tester. For Some Components, The Negative Terminal Is Required To Be Well Grounded To Cope With The Flow Of Large Currents, This Circuit Tester Is A Good Tool To Test Their Grounding.
Unroll The Leads. Clamp The Red Clip Of The Power Circuit Probe Tester To The Positive Terminal Of The Vehicle's Battery. Clamp The Black Clip To The Negative Terminal Of The Vehicle's Battery. After A Simple Hook-Up Of The Circuit Tracer To The Vehicle's Battery, Automotive Technician Can Conduct A Positive Or Negative Battery Current To The Tip By Rocking The Power Switch Forward Or Backward.
The Cable Length Of The Circuit Tracer Is About 4M(13Ft) Which Allows You Access And Test Any Electrical System Easily. The Led Indicator And Buzzer Warning Can Help You Clear Problems At A Glance. Test Light Adopts Advanced High Sensitivity Probe, Which Provides You Quick And Accurate Detection. Its Clips With Strong Bite Force Which Not Easy To Fall Off, Providing You Better Experience.
This Power Circuit Probe Tester Can Help You Quickly Identify Positive And Negative Polarity Of Electric Cables And Plugs Of Vehicles. When The Probe Tip Contact To The Positive Electrode, The Red Light On. When The Probe Tip Contact To The Negative Electrode, The Green Light On. It Can Also Test For Continuity And Do The Jumper Lead Operation With The Assistance Of Its Auxiliary Ground Lead.
Features
- The circuit tester is suitable for diagnostic in all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which can help you reduce diagnostic time in automotive electrical systems. In most cases, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping.This probe tester can assist you tracing problem wires and locating breaking points
- This power circuit probe tester can help you quickly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, the RED light on. When the probe tip contact to the negative electrode, the GREEN light on. It can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead
- Power circuit probe tester could activate components in and out of the vehicle s electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester. For some components, the negative terminal is required to be well grounded to cope with the flow of large currents, this circuit tester is a good tool to test their grounding
- The cable length of the circuit tracer is about 4m(13ft) which allows you access and test any electrical system easily. The LED indicator and buzzer warning can help you clear problems at a glance. Test light adopts advanced high sensitivity probe, which provides you quick and accurate detection. Its clips with strong bite force which not easy to fall off, providing you better experience
- Unroll the leads. Clamp the red clip of the power circuit probe tester to the positive terminal of the vehicle's battery. Clamp the black clip to the negative terminal of the vehicle's battery. After a simple hook-up of the circuit tracer to the vehicle's battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 1.57 x 10.43 x 3.54 Inches | Weight: 0.44 Pounds
See On Amazon