KOOTANS - Buying Guide
Last Updated: 05/03/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
KOOTANS 11 ft Fiberglass Wire Running Kit Wall Cable Wire Fishing Rod Pull Push Tool Electrical Fish Tape Set with 6 Different Accessories
Asin: B07PGPGT2P | Model: CQ0004 | PartNumber: CQ0004 | Ean: 0681413583344 | UPC: 681413583344
Size --- Single Rod Length: 1.1Ft/0.33M, Diameter: 0.16Inch/4Mm (Can Work In Narrow Areas). Rods Can Be Used Individually Or Screwed Together For Required Length, Can Be Extended Up To 11 Feet, And Together With 6 Accessories, Can Be Used In Differing Situations For Pulling Wire, Snagging Wire, Etc..
Convenient Storage --- 10Pieces 1.1Ft Fiberglass Rods And 6 Different Accessories In One Transparent Plastic Tube Case With Yellow Silicone Rubber End Caps. It Can Be Hung And No Need To Worry About End Cap Damage. A Great Handy Kit To Keep Everything Tidy And Tucked Away Without Taking Up Much Space..
High Visibility --- Electrical Fish Tape Rods Are Colored With A Bright Yellow To Be Able To Locate And Differentiate The Rods From Wires Easily. Also It Is Wear-Resistant, Corrosion-Resistant And Anti-Oxidation, Longer Lifespan..
Material --- Fiberglass, It's Better Than Plated Carbon Steel. This Fish Tape Has Strong Flexibility, Rigidity And Great Insulation, But Do Not Bend Too Much, Otherwise It Will Break(Cannot Be Used On A 90 Degree Bend Of Small Pipe). Low Friction Design Allows The Fish Tape Rod To Easily Glide Through The Conduit Without Stopping At Turns, Joints Or Couplings..
Features
- FUNCTION --- Fiberglass fish tape cable rods kit apply to cable, wires, HDMI and network lines, other home wiring installation. It's great for running wire through walls, attics, conduits, crawl spaces, sub-floors, ceilings and car trim, etc.
- MATERIAL --- Fiberglass, it's better than plated carbon steel. This fish tape has strong flexibility, rigidity and great insulation, but do not bend too much, otherwise it will break(Cannot be used on a 90 degree bend of small pipe). Low friction design allows the fish tape rod to easily glide through the conduit without stopping at turns, joints or couplings.
- SIZE --- Single rod length: 1.1FT/0.33M, Diameter: 0.16inch/4mm (can work in narrow areas). Rods can be used individually or screwed together for required length, can be extended up to 11 feet, and together with 6 accessories, can be used in differing situations for pulling wire, snagging wire, etc.
- HIGH VISIBILITY --- Electrical fish tape rods are colored with a bright yellow to be able to locate and differentiate the rods from wires easily. Also it is wear-resistant, corrosion-resistant and anti-oxidation, longer lifespan.
- CONVENIENT STORAGE --- 10pieces 1.1FT fiberglass rods and 6 different accessories in one transparent plastic tube case with yellow silicone rubber end caps. It can be hung and no need to worry about end cap damage. A great handy kit to keep everything tidy and tucked away without taking up much space.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #2
KOOTANS 4pcs 1/4" Hose Barb to 1/4 NPT Male Brass Quick Coupler Air M Type Fitting Quick-Connect Fitting
Asin: B07P962R5R | Model: 125 4B | PartNumber: 125 4B | Ean: 0681413584259 | UPC: 681413584259
Barbed Edges Provide Excellent Connection, Deeper And Smoother Threads Design Makes Work Easier And More Effective..
Temperature Range From -40 To +160 Degrees F..
Adapter For Connecting A Hose To A Male Threaded Connection..
Material: Ca 360 Brass, Solid Brass, Firm And Durable, Brass Is Corrosion Resistant And Can Be Used In Wet Environments..
Features
- Size: 1/4" Hose Barb to 1/4 NPT male pipe; Quantity: 4 pieces.
- Material: CA 360 Brass, solid brass, firm and durable, brass is corrosion resistant and can be used in wet environments.
- Barbed edges provide excellent connection, deeper and smoother threads design makes work easier and more effective.
- Adapter for connecting a hose to a male threaded connection.
- Temperature range from -40 to +160 degrees F.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Weight: 0.00 Pounds
See On Amazon #3
KOOTANS 1200Pcs Nitrile Rubber O Ring Kit 24 Sizes O Rings Assortment Kit Set Sealing Washer NBR Metric o-Ring Assortment for Plumbing, Gas, Automotive and Faucet Repair, Resist Oil and Heat O-Rings
Asin: B07QFVCNSN | Ean: 0682365626936 | UPC: 682365626936
【Popular Sizes】24 Popular Sizes O-Ring Sealing Washer. You May Not Don't Know What Size You Need. Fortunately, All The Sizes Of This O-Ring Kit Are Enough To Allow You To Cope With Various Family Needs. Metric Sizes From 6Mm To 28Mm O.D., According To Different Sizes Provide 1.5Mm/2.4Mm/3.1Mm 3 Reasonable Thicknesses. For More Details, Please Refer To Our Size Picture..
【Wide Application】Nitrile Rubber Metric O Rings Prevent Leaks In Fuel Or Water Plumbing, Machinery, Hydraulic, And Pneumatic Connection; Provide Secure Seals For Any Oil, Air, Gas, And Water Seal Application(Faucet, Sinks, Filters). Used To Electronic Equipment, Pipes, Tap Faucets, Pumps, Solenoids, Gauges, Sensors, Trucks, Cars, Motorcycles, Boats, Engines, Spray Guns, Pressure Washers, And More..
【Convenient Storage】1200 Pieces Nbr Rubber O Rings Are Stored In A Sturdy Transparent Plastic Box With Labels, Saves You Effort In Tidying Up And Choosing Sizes. And 1200 Pieces Are Enough That Will Keep You Going For Months Or Even Years. You Don't Have To Go To A Hardware Store..
【Product Feature】Soft And Flexible O Rings, Simply Snap On, Easy To Install. With 1 Set Of High Quality O-Ring Sealing Hooks As A Gift --- It Can Let You To Remove O Rings And Various Seals Easily. The Two Ends Of The Aluminum Alloy Rod Can Install Two Hooks To Meet Your Different Needs..
Features
- GOOD MATERIAL Made of high quality commercial grade nitrile rubber (NBR, Buna-N) material, great water and oil resistance, great heat resistant, good sealing, corrosion resistant, wear resistant, anti static. Durable and long service life. Great heat resistant performance: -40 (-40 ) to 120 ( 248 ).
- PRODUCT FEATURE Soft and flexible o rings, simply snap on, easy to install. With 1 set of high quality O-ring sealing hooks as a gift --- it can let you to remove o rings and various seals easily. The two ends of the aluminum alloy rod can install two hooks to meet your different needs.
- POPULAR SIZES 24 Popular Sizes O-Ring Sealing Washer. You may not don't know what size you need. Fortunately, all the sizes of this O-ring kit are enough to allow you to cope with various family needs. Metric sizes from 6mm to 28mm O.D., according to different sizes provide 1.5mm/2.4mm/3.1mm 3 reasonable thicknesses. For more details, please refer to our size picture.
- CONVENIENT STORAGE 1200 pieces NBR rubber o rings are stored in a sturdy transparent plastic box with labels, saves you effort in tidying up and choosing sizes. And 1200 pieces are enough that will keep you going for months or even years. You don't have to go to a hardware store.
- WIDE APPLICATION Nitrile rubber metric o rings prevent leaks in fuel or water plumbing, machinery, hydraulic, and pneumatic connection; provide secure seals for any oil, air, gas, and water seal application(faucet, sinks, filters). Used to electronic equipment, pipes, tap faucets, pumps, solenoids, gauges, sensors, trucks, cars, motorcycles, boats, engines, spray guns, pressure washers, and more.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #4
KOOTANS 240pcs 12 Sizes NBR Metal Bonded Sealing Washer Assort Kit Hydralic Oil Resist Rubber Oil Pipe Seal Gasket Metric NBR Metal Combination O-Ring Assortment Kit
Asin: B07QBNR7B4 | Model: JG1956 | PartNumber: JG1956 | Ean: 0682365626899 | UPC: 682365626899
Wide Application: Oil Pipeline System As A Medium, For Mechanical Device, To Prevent Oil, Fuel, Water And Gas Leakage, Etc. Great For High Pressure Fuel Systems, Brake Caliper Banjo Bolt, Brake Master Cylinder, Fuel Line Bolts And Water Line Bolts In Turbos, Automotive Replacement Drain Plug Gaskets, Etc..
Internal Diameter: Φ6(6Mm), Φ8(8Mm), Φ10(10Mm), Φ12(12Mm), Φ14(14Mm), Φ16(16Mm), Φ18(18Mm), Φ20(20Mm), Φ22(22Mm), Φ24(24Mm), Φ27(27Mm), Φ30(30Mm). 【Metric, Please See Picture 2 For Specific Dimensional Size】.
Easy To Use Packing: All O-Rings Are Stored In A Sturdy Plastic Box With Labels, That Avoids The Trouble Of Sorting And Selecting The Size. Variety Of Thickness And Size Are All In One Box, Very Convenient To Use..
Product Feature: Reliable Low And High Pressure Sealing, High And Low Temperature Capabilities, Bolt Torque Is Reduced With No Loss Of Tightening Load. Bonded Washers Are Used Extensively For Sealing Under The Heads Of Bolts In High Pressure Applications Where Coppers Washers Would Be Unsuitable. They Are Often Used In Hydraulic And Pneumatic Connections That Are Subject To Extreme Pressures..
Features
- MATERIAL: High quanlity NBR ring with carbon steel, good sealing. Anti static, high pressure resistant, oil resistant, corrosion resistant, UV resistant, heat resistant, wear resistant, durable and long service life. Quantity: 12 Sizes,240 Pieces rubber metal combination O Ring gaskets, meet almost all your needs.
- PRODUCT FEATURE: Reliable low and high pressure sealing, High and low temperature capabilities, Bolt torque is reduced with no loss of tightening load. Bonded washers are used extensively for sealing under the heads of bolts in high pressure applications where coppers washers would be unsuitable. They are often used in hydraulic and pneumatic connections that are subject to extreme pressures.
- WIDE APPLICATION: Oil pipeline system as a medium, for mechanical device, to prevent oil, fuel, water and gas leakage, etc. Great for high pressure fuel systems, brake caliper banjo bolt, brake master cylinder, fuel line bolts and water line bolts in turbos, automotive replacement drain plug gaskets, etc.
- EASY TO USE PACKING: All O-rings are stored in a sturdy plastic box with labels, that avoids the trouble of sorting and selecting the size. Variety of thickness and size are all in one box, very convenient to use.
- INTERNAL DIAMETER: 6(6mm), 8(8mm), 10(10mm), 12(12mm), 14(14mm), 16(16mm), 18(18mm), 20(20mm), 22(22mm), 24(24mm), 27(27mm), 30(30mm). Metric, Please See Picture 2 for Specific Dimensional Size
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #5
KOOTNAS 2-Pack Solid Brass Bulkhead Fittings, 1/4 NPT Taper Female 3/4" Straight Male Thread Brass Water Tank Connector with 4 Rubber Rings 4 Silicone Rings, for Tank Body, Wooden Barrels, etc
Asin: B08NVJHJ5S | Model: NO | PartNumber: NO | Ean: 0796862233075 | UPC: 796862233075
【Good Sealing 】- 2 Pieces 1/4 Npt Female X 3/4" Straight Male Brass Tank Fittings With 4 Rubber Rings And 4 Silicone Rings, You Can Install The O-Rings As Needed, They Can Provide Better Sealing On Both Sides Of The Bulkhead Without Leakage..
【What Can You Get】- 2 Pieces Brass Bulkhead Tank Fittings With Rubber And Silicone Rings, Friendly Customer Service. If You Are Not Satisfied With This Product, Please Don’T Hesitate To Contact Us, We Will Supply 100% Money Back, Ensure Your No Risking Purchasing..
【Where Used】- Commonly Used In The Water Barrels, Water Tank, Self-Made Liquid Storage Bucket And Other Bulkhead Sealing Projects, Etc..
【Material】- Made Of High Quality Brass. Durable, Smooth And Deep Internal And External Threads, Rust Proof, Easy To Connect. More Reliable Than Aluminum Or Plastic Materials..
Features
- Size - Female thread: 1/4 NPT taper thread; Male thread: 3/4 inch straight thread. Please confirm that our products are suitable for your project before buying.
- Material - Made of high quality brass. Durable, smooth and deep internal and external threads, rust proof, easy to connect. More reliable than aluminum or plastic materials.
- Good Sealing - 2 pieces 1/4 NPT female x 3/4 straight male brass tank fittings with 4 rubber rings and 4 silicone rings, you can install the o-rings as needed, they can provide better sealing on both sides of the bulkhead without leakage.
- Where Used - Commonly used in the water barrels, water tank, self-made liquid storage bucket and other bulkhead sealing projects, etc.
- What Can You Get - 2 pieces brass bulkhead tank fittings with rubber and silicone rings, Friendly Customer Service. If you are not satisfied with this product, please don t hesitate to contact us, we will supply 100% Money Back, ensure your no risking purchasing.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Dimensions: 1.57 x 4.72 x 1.97 inches
See On Amazon #6
KOOTANS 100pcs 2020 Series M5 Sliding T Nuts Metric M5 Thread Slide in T-Nut for 20x20 Standard 6mm T-Slot Aluminum Extrusion Profile
Asin: B07PQ13LCQ | Model: SlidingNut20 | PartNumber: SlidingNut20 | Ean: 0682365624949 | UPC: 682365624949
Slider Size: Length 10Mm, Height 4.5Mm, Width 9Mm; Step Width 6Mm, Step Height 1.5Mm..
2020 Series Aluminum Profile Sliding T-Nuts Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects, Etc..
Sliding Nut Can Only Be Inserted Into T Slot From The End Profile, It Owns The Most Excellent Connection Strength And Reliability. Very Easy To Be Slide Into T Slot Of Aluminum Profile..
Material: High Quality Carbon Steel,Have High Hardness, Surface Is Zinc-Plated For Good Rust Resistance..
Features
- TYPE: Sliding nut, suitable for Aluminum Extrusion Profile 2020 series T-Slot 6mm.
- MATERIAL: High quality carbon steel,have high hardness, surface is Zinc-plated for good rust resistance.
- SLIDER SIZE: Length 10mm, height 4.5mm, width 9mm; step width 6mm, step height 1.5mm.
- Sliding nut can only be inserted into T slot from the end profile, it owns the most excellent connection strength and reliability. Very easy to be slide into T slot of aluminum profile.
- 2020 Series Aluminum Profile Sliding T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, etc.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #7
KOOTANS 4 Sets Alloy Hinges for 2020 Series 6mm T-Slot Aluminum Extrusion Profile 3D Printer Frame
Asin: B07PXWCXVF | Model: XC5261 | PartNumber: XC5261 | Ean: 0682365625298 | UPC: 682365625298
20S Profile Accessory Zinc Alloy Hinge For 2020 Aluminum Profile Extrusion Frame.
Quantity: 4 Sets With Screws And Nuts; Complete Hinge Kit, Save Time On Purchases.
Fit: 2020 Aluminum Extrusion Profile T Slot 6Mm.
Wide Application; Generally Used As Fixing Hinge. Easy To Install And Apply.
Features
- Material: Zinc Alloy,It Has Greater Bearing Capacity than Aluminum Alloy
- Wide Application; Generally Used as Fixing Hinge. Easy to Install and Apply
- 20S Profile Accessory Zinc Alloy Hinge for 2020 Aluminum Profile Extrusion Frame
- Fit: 2020 Aluminum Extrusion Profile T Slot 6mm
- Quantity: 4 sets with Screws and Nuts; Complete Hinge Kit, Save Time on Purchases
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Dimensions: 0.04 x 1.20 x 1.50 inches
See On Amazon #8
KOOTANS 10Set 2020Series 2 Hole 90 Degree Inside Corner Bracket Kit, Black L Corner Bracket for 2020 Aluminum Extrusion Profile 6mm Slot with 20pcs M5 T Nuts, 20pcs M5 Hex Screw, 1pcs Wrench
Asin: B07PZKRTYZ | Model: XC5297 | PartNumber: XC5297 | Ean: 0682365625250 | UPC: 682365625250
2020 Series Aluminum Profile Connector Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects And Etc..
Rigid Connection, Used To Connect Pieces Of 20Mm Aluminum Extrusion At A 90 Degree Angle..
Fit 2020 Series Aluminum Extrusion..
Material: High Quality Aluminum Alloy; The Right Angle Bracket Fastener Used With M5 Screw And M5 T Nut..
Features
- Package Include: 10pieces Black L Brackets, 20pieces M5 Hex Screws, 20pieces M5 T-Nuts, 1piece Wrench.
- Material: High quality aluminum alloy; The right angle bracket fastener used with M5 screw and M5 t nut.
- 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects and etc.
- Fit 2020 series Aluminum extrusion.
- Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #9
KOOTANS 50pcs 2020 Series M6 Half Round Roll in Spring T Nuts for European Standard 20 Series 6mm T-Slot Aluminum Extrusion Profile
Asin: B07PQZ6MVB | Model: RollNut20 | PartNumber: RollNut20 | Ean: 0682365624710 | UPC: 682365624710
Material:High Quality Carbon Steel, The Surface Is Nickel-Plated.These Post-Assembly Nuts Have High Hardness And A Long Service Life And Good Rust Resistance. Back Spring Ball Can Be Fixed Its Position Which Make Installation Very Simple And Reliable..
2020 Series Aluminum Profile T-Nuts Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects, 3D Carvers, Machine Guards, Workstations, Etc..
Include 50Pcs Spring Ball Tee Nut,They Have Clean Thread And They Can Be Directly Into The Aluminum Slot Hole In Any Of The Assembly Point,Make Your Job Easier..
These Hammer Head Drop In T Slot Nuts Work Well In 20X20mm Aluminum Extrusion Profile T-Slot 6Mm.Please Confirm The Size Referring Image Before Purchasing..
Features
- Size: 7.6mm x 13.5mm x 4.4mm (W x L x H),thread:M6 metric.
- These hammer head drop in T slot nuts work well in 20x20mm aluminum extrusion profile t-slot 6mm.Please confirm the size referring image before purchasing.
- Material:high quality carbon steel, the surface is Nickel-plated.These post-assembly nuts have high hardness and a long service life and good rust resistance. Back spring ball can be fixed its position which make installation very simple and reliable.
- Include 50pcs spring ball tee nut,they have clean thread and they can be directly into the aluminum slot hole in any of the assembly point,make your job easier.
- 2020 Series Aluminum Profile T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, 3D carvers, machine guards, workstations, etc.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #10
4pcs Heavy Duty 3/8 NPT Male Thread to 1/4 NPT Female Thread Brass Reducers Hex Bushing Brass Fitting Pipe Hose Tube Adapter Convert (4)
Asin: B07P5SBMSL | Model: 3220CB | PartNumber: 3220CB | Ean: 0681413583955 | UPC: 681413583955
Function - Used To Connect Female And Male Pipes With Different Diameters. Apply To Plumbing Connections, Compressed Air, Hydraulic, Gas And Other Applications, Hex Nut For Easy Tightening And Loosening..
These 3/8 To 1/4 Npt Brass Reducers Contain Low-Lead, Not For Potable Water..
Operating Pressure: 1200 Psi, Temperature Range Of -65°F To +250°F (-53°C To +121°C). It's Hard Connect Way And In Most Cases Do Not Require Sealant..
Material - Premium Forged Brass Reducer, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility. Quantity: 4Pieces 3/8 To 1/4 Npt Reducing Brass Bushing Adapters..
Features
- SIZE - 3/8 NPT male thread to 1/4 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60 taper, so usually unable to screw the thread to the end.
- MATERIAL - Premium forged brass reducer, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces 3/8 to 1/4 npt reducing brass bushing adapters.
- FUNCTION - Used to connect female and male pipes with different diameters. Apply to plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening.
- Operating Pressure: 1200 psi, Temperature Range of -65 F to +250 F (-53 C to +121 C). It's hard connect way and in most cases do not require sealant.
- These 3/8 to 1/4 npt brass reducers contain low-lead, NOT FOR POTABLE WATER.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Weight: 0.10 Pounds
See On Amazon #11
KOOTANS 4-Pack Brass Pipe Fitting, 1/4" NPT Female to 1/4" NPT Female to 1/4" NPT Male Street Tee Fitting
Asin: B07P6WM1S4 | Model: 3750BB | PartNumber: 3750BB | Ean: 0681413584181 | UPC: 681413584181
Connect A Male-Ended And A Female-Ended Pipe And A Female-Ended Pipe.
Operating Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
Meets Specifications Astm B584 And Asme/Ansi B16 For Quality Assurance.
Wide Application; Apply To Home Improvement Rough Plumbing Pipes, Pipe Fittings, Accessories Pipe Fittings.
Features
- Size: 1/4" NPT Female x 1/4" NPT Male x 1/4" NPT Female hose pipe fitting;Quantity: 4pcs;
- Wide application; Apply to Home Improvement Rough Plumbing Pipes, Pipe Fittings, Accessories Pipe Fittings
- connect a male-ended and a female-ended pipe and a female-ended pipe
- Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance
- Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Weight: 0.10 Pounds
See On Amazon #12
KOOTANS 80pcs Glad Hand Seals Rubber Truck Glad Hand Seal, Air Hose Glad Hands Grommets Round Gaskets for Semi Trucks Trailers Tractors, Parts Number 10028 (40pcs Red, 40pcs Blue)
Asin: B0BY23R8SN | Model: K-HC8045-80 | PartNumber: K-HC8045-80
【Sufficient Quantity】80Pcs (40Pcs Red, 40Pcs Blue) Gladhand Seals Well Packed, Enough To Keep You Going For Months Or Even Years, You Don't Have To Go To A Truck Store Often. And You'll Have Plenty On Hand When It Is Time To Change Seals Out On Your Truck, Trailer..
【Good Service】For Whatever Reason, If You Are Not Satisfied, You Can Request A Replacement Or A Full Refund. Please Do Not Hesitate To Contact Us If You Have Any Questions. We Will Show You Our Sincere Attitude And Satisfactory Solution. Please Rest Assured Purchase..
【Compatible】Our Glad Hand Rubber Seals Compatible With Tramec 36001, Tectran 10111, Haldex 10028, Phillips 12-012, Velvac 035007, Sloan Cross 441714 And So On..
【Excellent Performance】Our Glad Hands Seals Are Durable To Use, Good Elasticity, High Toughness, Good Torsion,Tear Resistance,Oils Resistance, Chemicals Resistance And Waterproof. Red And Blue Color For Easy Identification To Avoid Incorrect Connections.Designed With A Tapered Base For Ease Of Installation. It's A Must-Have For Your Truck..
Features
- QUALITY RUBBER These truck glad hand seal are made of high quality rubber, soft touch and smooth surface. Suitable for all standard glad hands for semi trucks, providing good sealing function.
- EXCELLENT PERFORMANCE Our glad hands seals are durable to use, good elasticity, high toughness, good torsion,tear resistance,oils resistance, chemicals resistance and waterproof. Red and blue color for easy identification to avoid incorrect connections.Designed with a tapered base for ease of installation. It's a must-have for your truck.
- SUFFICIENT QUANTITY 80pcs (40pcs Red, 40pcs Blue) gladhand seals well packed, enough to keep you going for months or even years, you don't have to go to a truck store often. And you'll have plenty on hand when it is time to change seals out on your truck, trailer.
- COMPATIBLE Our glad hand rubber seals compatible with Tramec 36001, Tectran 10111, Haldex 10028, Phillips 12-012, Velvac 035007, Sloan Cross 441714 and so on.
- GOOD SERVICE For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Dimensions: 1.77 x 7.28 x 4.69 inches
Warranty: 12 months warranty
See On Amazon #13
KOOTANS 80pcs Brass Hose Barb Fittings Kit 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" Barb to Male NPT Thread Air Hose Fitting, Barbed Splicer and Tee with Clamps
Asin: B0CGZPSPLB | Model: K-BF-Barb-80PCS-KIT | PartNumber: K-BF-Barb-80PCS-KIT
【Quality Material】Our Hose Barb Fitting Is Made Of Ca 360 Brass For Barstock, Nice Quality And Provide High Resistance To Abrasion And Corrosio. The Brass Hose Barb Has Good Ductility At High Temperatures, And Low Magnetic Permeability. Temperature Range From -60°F To +250°F (-51°C To +121°C). Max Working Pressure: 1200Psi..
【Wide Applictaion】The Air Hose Adapter Fittings Kit Can Apply To Industrial Use, Automotive, Plumbing Pipes, Temperature Control Circuits, Pneumatic Circuits, Vacuum, Flfluid Systems Test Apparatus, Fuel Line, Coolant Lines And More..
【No Leaking & Easy To Install】Kootans Barbed Hose Fittings Are Thick And Well Made, Heavy Brass Construction, Surface Smooth Finish With Clean And Accurate Threading, No Weird Burrs. Easy To Install And Hold The Hose Together Tightly, No Leaking. This Barb Fitting Assortment Come With A Sturdy Box For Better Storage..
【Barb To Npt Male Coupler】Male Coupler: 3/16" Barb To 1/4" Mnpt (2Pcs), 3/16" Barb To 1/8" Mnpt (2Pcs), 1/4" Barb To 1/8" Mnpt (2Pcs), 1/4" Barb To 1/4" Mnpt (4Pcs), 5/16" Barb To 1/4" Mnpt (4Pcs), 5/16" Barb To 3/8" Mnpt (4Pcs), 3/8" Barb To 1/4" Mnpt (4Pcs), 3/8" Barb To 3/8" Mnpt (2Pcs), 1/2" Barb To 3/8" Mnpt (2Pcs), 1/2" Barb To 1/2" Mnpt (2Pcs). Hose Clamps: 20Pcs. Please Note, The Npt Thread Size Is A Nominal Pipe Size And It Does Not Represent The Actual Diameter. Kindly Measure Your Product Dimension Before Order..
Features
- BARB SPLICER & TEE The barb fitting assortment includes Barb Splicer: 3/16" (4pcs), 1/4" (4pcs), 5/16" (4pcs), 3/8" (4pcs), 1/2" (2pcs). Barb Tee: 1/8" (2pcs), 3/16" (2pcs), 1/4" (3pcs), 5/16" (2pcs), 3/8" (3pcs), 1/2" (2pcs).
- BARB TO NPT MALE COUPLER Male Coupler: 3/16 barb to 1/4 MNPT (2pcs), 3/16 barb to 1/8 MNPT (2pcs), 1/4 barb to 1/8 MNPT (2pcs), 1/4 barb to 1/4 MNPT (4pcs), 5/16 barb to 1/4 MNPT (4pcs), 5/16 barb to 3/8 MNPT (4pcs), 3/8 barb to 1/4 MNPT (4pcs), 3/8 barb to 3/8 MNPT (2pcs), 1/2 barb to 3/8 MNPT (2pcs), 1/2 barb to 1/2 MNPT (2pcs). Hose Clamps: 20pcs. PLEASE NOTE, The NPT thread size is a nominal pipe size and it does not represent the actual diameter. Kindly measure your product dimension before order.
- QUALITY MATERIAL Our hose barb fitting is made of CA 360 brass for barstock, nice quality and provide high resistance to abrasion and corrosio. The brass hose barb has good ductility at high temperatures, and low magnetic permeability. Temperature range from -60 F to +250 F (-51 C to +121 C). Max Working Pressure: 1200psi.
- NO LEAKING & EASY TO INSTALL KOOTANS barbed hose fittings are thick and well made, heavy brass construction, surface smooth finish with clean and accurate threading, no weird burrs. Easy to Install and hold the hose together tightly, no leaking. This barb fitting assortment come with a sturdy box for better storage.
- WIDE APPLICTAION The air hose adapter fittings kit can apply to industrial use, automotive, plumbing pipes, temperature control circuits, pneumatic circuits, vacuum, flfluid systems test apparatus, fuel line, coolant lines and more.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
Dimensions: 2.00 x 8.81 x 6.88 inches
See On Amazon #14
KOOTANS 100 Pcs 2020 Series M4 Thread T Slide Nuts Hammer Drop in Nut for 20 Aluminum Extrusion Profile with T Slot 6mm
Asin: B07PMM7C44 | Model: 20S-M4 T NUT | PartNumber: 20S-M4 T NUT | Ean: 0682365624314 | UPC: 682365624314
Size:0.39" X 0.23" X 0.17" / 10Mm X 6Mm X 4.5Mm (W X L X H),Thread:M4 Metric..
2020 Series Aluminum Profile T-Nuts Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects, 3D Carvers, Machine Guards, Workstations, Etc..
Include 100Pcs Tee Nut,They Have Clean Thread,Make Your Job Easier..
These Hammer Head Drop In T Slot Nuts Work Well In 20X20mm Aluminum Extrusion Profile T-Slot 6Mm.Please Confirm The Size Referring Image Before Purchasing..
Features
- Material:high quality carbon steel, the surface is Nickel-plated.These post-assembly nuts have high hardness and a long service life and good rust resistance.
- These hammer head drop in T slot nuts work well in 20x20mm aluminum extrusion profile t-slot 6mm.Please confirm the size referring image before purchasing.
- Size:0.39 x 0.23 x 0.17 / 10mm x 6mm x 4.5mm (W x L x H),thread:M4 metric.
- Include 100pcs tee nut,they have clean thread,make your job easier.
- 2020 Series Aluminum Profile T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, 3D carvers, machine guards, workstations, etc.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #15
KOOTANS 20pcs 2020 Series Corner Bracket Right Angle 2 Hole Aluminum Brackets Connector for 20x20mm Aluminum Extrusion Profile with Slot 6mm
Asin: B07P9H8FW1 | Ean: 0681413584358 | UPC: 681413584358
Features --- Rigid Connection, Used To Connect Pieces Of 20Mm Aluminum Extrusion At A 90 Degree Angle..
Package Include --- 20 Pieces Right Angle Solid Cast Aluminum Corner Bracket. Easy And Convenient Installation..
Application --- Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects And So On..
Size --- 20 × 20 × 17Mm; Suitable For Most Of Metric 20 Series Aluminum Extrusion..
Features
- Material --- Made of high quality aluminum material, good rust resistance and better performance, high hardness and a long service life.
- Size --- 20 20 17mm; Suitable for most of metric 20 Series aluminum extrusion.
- Features --- Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
- Application --- Widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, robotics projects and so on.
- Package Include --- 20 pieces right angle solid cast aluminum corner bracket. Easy and convenient installation.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #16
KOOTANS 6.3" (160mm) Capacity Belt Strap Wrench, 23"(585mm) Length Adjustable Strap Wrench, 12"(300mm) Steel Handle, Multi-Purpose Oil Filter Strap Wrench for Opening Filter and Pipe
Asin: B07PKSQSBL | Model: KC-GG0037 | PartNumber: KC-GG0037 | Ean: 0681413583221 | UPC: 681413583221
Function - Adjustable Strap Wrench, Flexible, Easy To Carry. It Works In Tight Confined Areas And Can Be Used On Pvc Or Metal Pipes, Fittings, Filters, Shafts, And Irregular Shapes. It Provides A Firm Grip..
Widely Used - Suitable For Industrial And Home Plumbing, Automobiles, Tractors, Oil Filters, Glue Joints, Shower Heads, Fuel Filters, Jar Openers, Pvc Junctions, Bottles, Faucets, Water Filters, Sinks, Taps And Many More Object..
Design - Professional Oil Filter & Pipe Belt Wrench, It Has Three Layers Of Tetolon, Thicker And More Durable, Can Withstand More Than 100Kg Of Pulling Force. The Belt Surface Is Rough, And The Handle Head Is Designed With Anti-Skid Protrusion, Not Easy To Slide. It Improves Work Efficiency..
Size - Applicable Max Diameter: About 6.3" (160Mm). 12 Inch (300Mm) Handle Length And 23 Inch (585Mm) Strap Length..
Features
- MATERIAL - Strap wrench handle is made of high quality forged steel, sturdy and durable.The belt is made of tyre rubber, which has good toughness and is not easy to break.
- SIZE - Applicable Max Diameter: about 6.3 (160mm). 12 inch (300mm) handle length and 23 inch (585mm) strap length.
- FUNCTION - Adjustable strap wrench, flexible, easy to carry. It works in tight confined areas and can be used on PVC or metal pipes, fittings, filters, shafts, and irregular shapes. It provides a firm grip.
- DESIGN - Professional oil filter & pipe belt wrench, it has three layers of tetolon, thicker and more durable, can withstand more than 100kg of pulling force. The belt surface is rough, and the handle head is designed with anti-skid protrusion, not easy to slide. It improves work efficiency.
- WIDELY USED - Suitable for industrial and home plumbing, automobiles, tractors, oil filters, glue joints, shower heads, fuel filters, jar openers, pvc junctions, bottles, faucets, water filters, sinks, taps and many more object.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #17
KOOTANS 4pcs Link Connector Joint Aluminum Profile Length Extension Zinc Plated Fastener with Screws for 2020 Slot 6mm Aluminum Profile
Asin: B07PDRTHJ2 | Model: XC5041 | PartNumber: XC5041 | Ean: 0681413583436 | UPC: 681413583436
2020 Series Aluminum Profile Connector Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects..
Rigid Connection, Used To Connect Pieces Of 20Mm Aluminum Extrusion At Straight Angle..
Fit 2020 Series Aluminum Extrusion With Slot 6Mm.
Material: Zinc Coated.
Features
- Package include: 4pcs Connector and 16pcs Screws.
- Material: Zinc coated
- 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
- Fit 2020 series Aluminum extrusion with slot 6mm
- Rigid connection, used to connect pieces of 20mm aluminum extrusion at Straight angle.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #18
KOOTANS Belt Strap Wrench 4.7'' (120mm) Max Diameter, 19.7"(500mm) Length Adjustable Strap, 8.5"(215mm) Steel Handle, Oil Filter Strap Wrench for Opening Filter and Pipe
Asin: B07X7FB3W7 | Ean: 0796862231910 | UPC: 796862231910
Light, Flexible, Easy To Carry.It Can Be Adjusted Freely According To Need..
Useful Tool - Suitable For Automobiles, Tractors, Oil Filters, Glue Joints, Shower Heads, Fuel Filters, Jar Openers, Pvc Junctions, Bottles, Faucets, Water Filters, Sinks, Taps And Many More Object..
Professional For Oil Wrench, Three-Layer Belt Anti-Skid Design, Not Easy To Slide, Thicker, More Durable..
8.46-Inch(215Mm) Handle Length And 19.7-Inch(500Mm) Strap Length..
Features
- Material: The handle is made of superior metal, super sturdy and durable.The belt is made of tyre rubber, which has good toughness and is not easy to break.
- 8.46-inch(215mm) handle length and 19.7-inch(500mm) strap length.
- Light, flexible, easy to carry.It can be adjusted freely according to need.
- Professional for Oil wrench, Three-layer belt anti-skid design, not easy to slide, thicker, more durable.
- Useful Tool - Suitable for automobiles, tractors, oil filters, glue joints, shower heads, fuel filters, jar openers, pvc junctions, bottles, faucets, water filters, sinks, taps and many more object.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #19
KOOTANS 20-Pack 90 Degree Angle Brackets Interior Joint Corner Bracket for European Standard 2020 Series T Slot 6mm Aluminum Extrusion Profile, with Screws and Wrench
Asin: B07PJ8H5ZQ | Model: XC5220 | PartNumber: XC5220 | Ean: 0681413583481 | UPC: 681413583481
2020 Series Aluminum Profile Connector Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects..
Rigid Connection, Used To Connect Pieces Of 20Mm Aluminum Extrusion At A 90 Degree Angle.
Fit European Standard 2020 Series Aluminum Extrusion.
Material: Electrophoresis Zinc Alloy Has Excellent Characteristics Of High Wear Resistance, Rust Resistance And Stability..
Features
- Package include: 20pcs L joint and 40pcs screws and wrench
- Material: Electrophoresis zinc alloy has excellent characteristics of high wear resistance, rust resistance and stability.
- 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
- Fit European standard 2020 series Aluminum extrusion
- Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #20
KOOTANS 2pcs/lot Zinc Alloy Flexible Pivot Joint Connector for Aluminum Extrusion Profile 3030 Series Slot 8mm
Asin: B07NQ8BY19 | Model: XC5153 | PartNumber: XC5153 | Ean: 0682365625472 | UPC: 682365625472
Flexible Pivot Joint Connector, Used To Connect Pieces Of 30Mm Aluminum Extrusion With Any Degree, Free Adjust, Then Fixed.
3030 Series Aluminum Profile Connector Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects.
Convenient To Use, They Can Be Simply Fastened With Bolts And Nuts, (Bolts And Nuts Are Not Included).
Basic Size: 30Mmx30mm; For Aluminum Profile 3030 Series.
Features
- Quantity: 2pcs; Material: Zinc Alloy
- Basic size: 30mmx30mm; for aluminum profile 3030 series
- Flexible Pivot Joint Connector, used to connect pieces of 30mm aluminum extrusion with any degree, free adjust, Then fixed
- Convenient to use, they can be simply fastened with bolts and nuts, (bolts and nuts are not included)
- 3030 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon