LisFaxbo - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
LisFaxbo Heavy Duty 1" Wheel Washers Replacement for 4/156mm Bolt Pattern Polaris 3/8" Studs to Polaris 12mm Wheels 2008-2014 RZR Ranger 500/800 (Set of 4)
Asin: B089DHWBNK | Ean: 0194998928511 | UPC: 194998928511
The Products Allow You To Run Standard Polaris 12Mm Wheels On Your 2008-2014 Rzr, Ranger 500/800, Etc..
Note: Please Confirm Before Purchase-4/156 Mm Bolt Pattern : Polaris 3/8" Wheel Studs To 12Mm Wheels.Prevent Purchase Of Mismatched Products From Causing Unnecessary Troubles.
Easy To Install: They Will Provide Better Stability And Maneuverability For Your Car.They Also Increase Tire Clearance, Fix Brake Caliper Clearance Issues, Allow Installation Of Lift/Lowering Kits And Wider, Larger, Or High Traction Tires.
The Product Includes: 4 Washers With 12Mm Studs - (1" Per Washer) & 16 Open End Short 3/8" Acorn Lugnuts.
Features
- FITS:Heavy Duty 1" Wheel Washers Replacement for 4/156mm Bolt Pattern Polaris 3/8" Studs to Polaris 12mm Wheels 2008-2014 RZR Ranger 500/800
- The product includes: 4 Washers with 12mm studs - (1 per Washer) & 16 Open end short 3/8 acorn lugnuts
- The products allow you to run standard Polaris 12mm wheels on your 2008-2014 RZR, Ranger 500/800, etc.
- Easy to install: They will provide better stability and maneuverability for your car.They also increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires
- Note: please confirm before purchase-4/156 mm bolt pattern : Polaris 3/8 wheel studs to 12mm wheels.Prevent purchase of mismatched products from causing unnecessary troubles
- See more on Amazon...
Brand: LisFaxbo | Manufacturer: Beauty-Life
See On Amazon #2
1406 Carburetor Replacement for Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor
Asin: B0B2K27V9Q | Model: CBRT-1406 | PartNumber: CBRT-1406
Function: For Small And Some Large Engines To Get Good Street Performance And Fuel Economy. It Is Not Affected By Engine Flashback That Means There Is No Power Valve To Blow Out, And The Rod Can Be Replaced In A Few Seconds Without Removing The Carburetor..
Package Include: 1*1406 Performer Carburetor, 1* Square-Bore Base Gasket, 1* Horn Gasket, 1* Air Cleaner Stud, 2* Fuel Filters, 4* Clamps, 1* Fuel Line(As Shown In The Picture).
Good Design: Square Bore Air Valve Assisted Manual Choke New Carburetor Features Two-Piece All-Aluminum Construction For Lower Operating Temperatures And Less Warpage. The Carburetor Is Precisely Adjusted Using An Easy-To-Replace..
Fitment:Chevy: Chevelle 350, Cheyenne Pickup, Corvette, Silverado, Camaro; Fo-Rd:Mercury Cougar 289 4V, Mustang Gt 289, Mach One 351 Windsor, Bronco 531 M; Gm:Gmc Pickup / Truck, Pontiac Lemans T37;Other Models: Grand Wagoneer, Cj5, J20, Delta 88, Plymouth, Gto, Cadillac Deville.
Features
- Match with a variety of manifolds that include Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design
- Fitment:Chevy: Chevelle 350, Cheyenne Pickup, Corvette, Silverado, Camaro; Fo-rd:Mercury Cougar 289 4V, Mustang GT 289, Mach One 351 Windsor, Bronco 531 m; GM:GMC Pickup / Truck, Pontiac LeMans T37;Other Models: Grand Wagoneer, CJ5, J20, Delta 88, Plymouth, GTO, Cadillac Deville
- Function: For small and some large engines to get good street performance and fuel economy. It is not affected by engine flashback that means there is no power valve to blow out, and the rod can be replaced in a few seconds without removing the carburetor.
- Good Design: Square bore air valve assisted manual choke New carburetor features two-piece all-aluminum construction for lower operating temperatures and less warpage. The carburetor is precisely adjusted using an easy-to-replace.
- Package Include: 1*1406 performer carburetor, 1* square-bore base gasket, 1* horn gasket, 1* air cleaner stud, 2* fuel filters, 4* clamps, 1* fuel line(As shown in the picture)
- See more on Amazon...
Brand: LisFaxbo | Manufacturer: LisFaxbo
Dimensions: 6.75 x 13.00 x 8.50 Inches
See On Amazon #3
LisFaxbo 628661 Refrigerator Power Supply Circuit Board Replacement for N41X N51X N6X N8X N1095 Series,1200 Series,1210 Series,1211 Series
Asin: B0CM66R2C9 | Model: JJ-CF44-628661 | PartNumber: JJ-CF44-628661
Function: The Installation Of The Product Ensures That The Cooling Systems Are Always In Normal Operation..
Note: If Your Refrigerator Was Manufactured Prior To 2006, This Board Will Not Work.For Refrigerators Manufactured Prior To 2006, The Pin Connectors (8 In A Double Row), This Product Is Single Row..
Protection: The Panel Is Located On The Outside Of The Caravan And Is Susceptible To Rain And Snow. After Spraying And Drying The Nano Waterproof Coating On The Electronic Circuit Board, It Can Form A Transparent And Colourless Molecular Waterproof Film Chain In The Water And Adhere Normally. Protect The Components So That Water Cannot Touch The Protected Components..
Replaced Oem: 628661.
Features
- Fitment: N41X N51X Series- N410, N412, N510, N512.N6X Series - N611, N621, N621F, N623, N624, N641, N641F, N643.N8X Series - N811, N821, N821F, N821V, N822, N822F, N823, N824, N841, N841V, N842, N843.NX/ NXA Series - NX611, NX641, NXA641, NX811, NX841, NXA841.N1095 Series,1200 Series,1210 Series,1211 Series.
- Replaced OEM: 628661
- Function: The installation of the product ensures that the cooling systems are always in normal operation.
- Protection: The panel is located on the outside of the caravan and is susceptible to rain and snow. After spraying and drying the nano waterproof coating on the electronic circuit board, it can form a transparent and colourless molecular waterproof film chain in the water and adhere normally. Protect the components so that water cannot touch the protected components.
- Note: If your refrigerator was manufactured prior to 2006, this board will not work.For refrigerators manufactured prior to 2006, the pin connectors (8 in a double row), this product is single row.
- See more on Amazon...
Brand: LisFaxbo | Manufacturer: LisFaxbo
See On Amazon #4
LisFaxbo Camshaft Timing Alignment Tool Kit Replacement for F-ord M-azda Duratec MZR 303 465 507 574 Zetec 2.0L 2.3L 2.5L SVT
Asin: B0BKG5RCSL | Model: FLK-CMF01 | PartNumber: FLK-CMF01
The Product Is Easy To Use And Durable.The Tool Set Will Be Either Black & Zinc-Coated, Protecting Against Rust.
Camshaft Alignment Plate Otc 303-574 / Otc 6475 T97-P6000-A Timing Peg Crankshaft Tdc Zetec.
To Otc 303-507 Timing Peg, Crankshaft Tdc Duratec Ast Fm 2300 2330 Peg Bar F-Ord / M-Azda Duratec / Mzr.
Products Include: An Aluminum Camshaft Bar, Plus One Short Top Dead Center (Tdc) Timing Pin And One Long Tdc Timing Pin.
Features
- For Servicing the Timing Belt, Chains, Head Gaskets or Other Valve Train Repairs on F-ord Mazda Duratec MZR
- Products include: an aluminum camshaft bar, plus one short top dead center (TDC) timing pin and one long TDC timing pin
- The product is easy to use and durable.The tool set will be either black & zinc-coated, protecting against rust
- To OTC 303-507 Timing Peg, Crankshaft TDC Duratec AST FM 2300 2330 Peg Bar F-ord / M-azda Duratec / MZR
- Camshaft Alignment Plate OTC 303-574 / OTC 6475 T97-P6000-A Timing Peg Crankshaft TDC Zetec
- See more on Amazon...
Brand: LisFaxbo | Manufacturer: LisFaxbo
See On Amazon #5
1405 Carburetor Replacement for Performer 600 CFM Bore 4-Barrel Air Valve Secondary Manual Choke
Asin: B0B2JX6N1B | Model: CBRT-1405 | PartNumber: CBRT-1405
Good Design:Square Bore Air Valve Assisted Manual Choke New Carburetor Features Two-Piece All-Aluminum Construction For Lower Operating Temperatures And Less Warpage. The Carburetor Is Precisely Adjusted Using An Easy-To-Replace..
Package Include: 1*1405 Performer Carburetor, 1* Square-Bore Base Gasket, 1* Horn Gasket, 1* Air Cleaner Stud, 2* Fuel Filters, 4* Clamps, 1* Fuel Line(As Shown In The Picture).
Note: This Performer Series Carburetors Are Not Suitable For Computer Control Applications. Includes General Motors’ Vehicles Equipped With Q-Jet Carburetor In 1981 And Later, And Some F-Ord Vehicles Equipped With Automatic Overdrive (Aod) Transmission In 1981 And Later..
Function: For Small And Some Large Engines To Get Good Street Performance And Fuel Economy. It Is Not Affected By Engine Flashback That Means There Is No Power Valve To Blow Out, And The Rod Can Be Replaced In A Few Seconds Without Removing The Carburetor..
Features
- Fitment:Match with a variety of manifolds that include Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design
- Function: For small and some large engines to get good street performance and fuel economy. It is not affected by engine flashback that means there is no power valve to blow out, and the rod can be replaced in a few seconds without removing the carburetor.
- Good Design:Square bore air valve assisted manual choke New carburetor features two-piece all-aluminum construction for lower operating temperatures and less warpage. The carburetor is precisely adjusted using an easy-to-replace.
- Note: This performer series carburetors are not suitable for computer control applications. Includes general motors vehicles equipped with Q-Jet carburetor in 1981 and later, and some F-ord vehicles equipped with automatic overdrive (AOD) transmission in 1981 and later.
- Package Include: 1*1405 performer carburetor, 1* square-bore base gasket, 1* horn gasket, 1* air cleaner stud, 2* fuel filters, 4* clamps, 1* fuel line(As shown in the picture)
- See more on Amazon...
Brand: LisFaxbo | Manufacturer: LisFaxbo
See On Amazon #6
LisFaxbo Cam Swaps Timing Belt Cam Locking Tool Cam Timing Alignment Tool Kit Replacement for Automotive Tools
Asin: B0C7TLCHBT | Model: CMF01-CK | PartNumber: CMF01-CK
Camshaft Alignment Plate Otc 303-574 / Otc 6475 T97-P6000-A Timing Peg Crankshaft Tdc Zetec.
Package Included: 1Pcs Cam Lock Gage; 2Pcs Crank Stop Tdc Pins.
Material: Made Of Hight Quality Aluminum & Steel.The Product Is Easy To Use And Durable.The Tool Set Will Be Either Black & Zinc-Coated, Protecting Against Rust.
These Tools Hold The Crankshaft And Cam In Place During Engine Timing.For Servicing The Timing Belt, Chains, Head Gaskets Or Other Valve Train Repairs On F-Ord Mazda Duratec Mzr.
Features
- Fitment: Compatible with F-ord / M-azda Zetec 2.0L 2.3L 2.5L MZR / Duratec Engines
- These tools hold the crankshaft and cam in place during engine timing.For Servicing the Timing Belt, Chains, Head Gaskets or Other Valve Train Repairs on F-ord Mazda Duratec MZR
- Camshaft Alignment Plate OTC 303-574 / OTC 6475 T97-P6000-A Timing Peg Crankshaft TDC Zetec
- Material: Made of hight quality aluminum & steel.The product is easy to use and durable.The tool set will be either black & zinc-coated, protecting against rust
- Package included: 1pcs cam lock gage; 2pcs crank stop TDC pins
- See more on Amazon...
Brand: LisFaxbo | Manufacturer: LisFaxbo
See On Amazon