LycoGear - Buying Guide
Last Updated: 05/01/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
LycoGear Universal Ham CB Radio Microphone Mic Hanger Holder Mount with Adhesive Back, Pre Drill Holes & Single T Tab Connection, KLP-X2
Asin: B096L9W8RW | Model: KLP-X2 | PartNumber: KLP-X2
3-Ways To Setup, 1)3M Vbh Adhesive Back, 2) Drill In Hard Install (Drill Screws Are Not Included) & 3) Single T Compatible- This Is Compatible With All Single T Mounting Solution In The Market From Makers Like Arkon, Bracketron, Proclip, Panvise & More.
One Year Manufactures Direct Replacement Warranty.
Universal Belt Cilp & Round Knob Compatible- This Mic Hanger Mount Will Work With Alinco, Anytone, Baofeng, Kenwood, Midland, Motorola, Uniden, Yaesu, Speaker Mics For Ht's & All Two-Radio With Belt Clip Or Round Knob.
Features
- This Mic Hanger Mount is compatible with Alinco, Anytone, Bao-Feng, Kenwood, Midland, Motorola, Uniden, Yaesu, speaker mics for HT's & all two-radio with belt clip or Round Knob. Just clip the clip onto the mount and your ready to go.
- Universal Belt cilp & Round Knob compatible- This Mic Hanger Mount will work with Alinco, Anytone, BaoFeng, Kenwood, Midland, Motorola, Uniden, Yaesu, speaker mics for HT's & all two-radio with belt clip or Round Knob
- 3-Ways to setup, 1)3M VBH adhesive back, 2) Drill in hard install (Drill Screws are not included) & 3) Single T compatible- This is compatible with all single T mounting solution in the market from makers like Arkon, bracketron, ProClip, Panvise & more
- One Year Manufactures Direct Replacement Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: One year.
See On Amazon #2
Heavy Duty Tablet GPS Smartphone AMPS Drill Base Dash ELD Mount for Truck Van Commercial Vehicle Semi Fleet Limo (Holder fit all Tablets & Phones iPhone)
Asin: B07WVNPNTV | Model: RM1+SW25AMPS+SWTC-LC+HLD23_LYHC | PartNumber: RM1+SW25AMPS+SWTC-LC+HLD23_LYHC
Suitable For Tablet Or Smartphone Devices From 5.5" To 11.2" In Device Measurement (Fit Garmin Nuvi Drive Drivesmart 60 61 62 65 66 67 68 70 71 Gps Gps Also).
1 Year Manufacture Direct Replacement Warranty.
Heavy Duty - Our Lycan Amps Mount Is A Heavy Duty Multi-Angle Drill Base Pedestal Mounting Solution For All Tablets & Smartphone. It Is Designed To Install Directly On A Table, Cart, Desk, In A Vehicle, Or On Any Flat Surface. The Lycan Amps Mount Allows You To Mount Your Smartphone/Tablet Where You Need It Most..
Features
- Innovative design - Dual Spring Loaded Tension provides secure support for your tablet & Smartphone (fit All tablets and smartphone from Galaxy Pixel to iphone 12 13 14 15 S24 S23 S22 8 7)
- HEAVY DUTY - Our Lycan AMPS Mount is a heavy duty Multi-Angle Drill Base pedestal mounting solution for All Tablets & Smartphone. It is designed to install directly on a table, cart, desk, in a vehicle, or on any flat surface. The Lycan AMPS mount allows you to mount your smartphone/tablet where you need it most.
- Suitable for Tablet or Smartphone devices from 5.5 to 11.2 in device measurement (Fit Garmin Nuvi Drive DriveSmart 60 61 62 65 66 67 68 70 71 GPS GPS also)
- 1 Year Manufacture Direct Replacement Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 0.79 x 6.00 x 3.00 inches
Warranty: 1 Year Warranty
See On Amazon #3
Heavy Duty Metal AMPS Hole Pattern ELD Drinks Cup Holder Mount Compatible with Ham CB Pro Satellite Radio & All Universal 2 & 4 Hole fit AMPS Pattern mounting Device
Asin: B07YBKWYMM | Model: CUP8+AM20+SW-AP20M | PartNumber: CUP8+AM20+SW-AP20M
One Year Manufacture Directly Replacement Warranty (We Are Located In California Not Some Place You Never Heard Of Before).
Heavy Duty Metal Alloy Ball Joint That Is Design To Last, It Is Compatible With All 2 & 4 Hole Amps Pattern Device From Satellite Radio / Cb Ham Radio / Fish Finder Gps And Mount Manufactures That Use Amps Connection. (Please Note That Screws Are Not Included Due To Different Screw Size Are Used By Different Manufacture).
Features
- Our Heavy Duty Cup Holder Mount will fit most if not all cup holder ranging from 3" to 3.75" inch
- Heavy Duty Metal Alloy Ball Joint that is design to last, it is compatible with all 2 & 4 hole AMPS pattern device from Satellite Radio / CB Ham Radio / fish finder GPS and Mount Manufactures that use AMPS connection. (Please note that screws are NOT included due to different screw size are used by different manufacture)
- One Year Manufacture Directly Replacement Warranty (We are located in California not some place you never heard of before)
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Weight: 0.95 Pounds
See On Amazon #4
LyGear Radar Detector Easy nnect Adhesive Mount for Uniden R1 R3 R7 DFR6 DFR7 DFR8 DFR9 Radar Detectors,GP18+KLP-UN01_LYHC
Asin: B08XYC5ZX3 | Model: GP18+KLP-UN01_LYHC | PartNumber: GP18+KLP-UN01_LYHC
Compatible With Only With Following Uniden Radar Detectors Uniden R1, R2, R3, R4, R7, R8, R9 Lrd300, Lrd350, Lrd400, Lrd450, Lrd500, Lrd550, Lrd600, Lrd650, Lrd700, Lrd750, Lrd800, Lrd850, Lrd900, Lrd937, Lrd950, Lrd6199 Sw, Lrd6499 Sw, Df1, Dfr2, Dfr3, Dfr4, Dfr5, Dfr6, Dfr7, Dfr8, Dfr9.
Please Visit The Following Asin B008mhbzgg For Your Radar Detector Charging Needs.
Easy To Install With Turn To Lock Mount Into Position, 3M Adhesive Base Is Superior Performance Under Extreme Heat And Cold Weather.
Features
- NEW AND IMPROVE PERFECT FIT Metal Cradle that will custom fit your Uniden Radar Detectors (Please verify compatibilities)
- Easy to install with turn to lock mount into position, 3M Adhesive Base is Superior performance under extreme heat and cold weather
- COMPATIBLE WITH Only with following Uniden Radar Detectors Uniden R1, R2, R3, R4, R7, R8, R9 LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199 SW, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9
- Please visit the following ASIN B008MHBZGG for your radar detector Charging Needs
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Weight: 0.15 Pounds
See On Amazon #5
LycoGear Radar Detector Rearview Mirror Stem Mount for Uniden R1 R2 R3 R4 DF1 DFR2 DFR3 DFR4 DFR5 DFR6 DFR7 DFR8 DFR9 Radar Detector (for Uniden Radar Detector Only)
Asin: B083JQLQB5 | Model: BKE-RD11+GPBALL-16+KLP-UN01_1 | PartNumber: BKE-RD11+GPBALL-16+KLP-UN01_1
Not Compatible With R7 Detectors.
One Year Manufacture Direct Replacement Warranty.
Compatible With Following Uniden Radar Detectors R1, R2, R3, R4, Lrd300, Lrd350, Lrd400, Lrd450, Lrd500, Lrd550, Lrd600, Lrd650, Lrd700, Lrd750, Lrd800, Lrd850, Lrd900, Lrd937, Lrd950, Lrd6199 Lrd6499 Sw, Df1, Dfr2, Dfr3, Dfr4, Dfr5, Dfr6, Dfr7, Dfr8, Dfr9.
Features
- No More Troublesome Suction Cups and Install in Most Cars min Minutes ****PLEASE MAKE SURE THAT YOU HAVE AT LEAST 1 INCH OF STEM SPACE TO INSTALL THIS MOUNT*** (Not Compatible w/Corvette & vehicle with short stem)
- Compatible with following Uniden Radar Detectors R1, R2, R3, R4, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199 LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9
- NOT COMPATIBLE WITH R7 DETECTORS
- ONE YEAR MANUFACTURE DIRECT REPLACEMENT WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 0.39 x 3.00 x 2.00 inches | Weight: 0.19 pounds
See On Amazon #6
LycoGear Strong Suction Mount w/Magnetic Cradle for Escort IX IXc Max 3 Max360C /Year 2020 Max 360 Redline EX Beltronics GT360 Cobra DualPro Radar Detectors (EZ Magnet Dock Compatible)
Asin: B08K46XX49 | Model: MT-RX3+KLP-36C+DSK-K | PartNumber: MT-RX3+KLP-36C+DSK-K | Ean: 0855762006223 | UPC: 855762006223
One Year Manufacture Direct Replacement Warranty.
Quick Releases Strong Magnetic Cradle Dock That Will Clench On To Ez Magnet Compatible Radar Detectors (Compatible With Escort Ix, Escort Ixc, Redline Ex, Max 360C, And 2020 Max360 Max 3 Models That Use Ezmag Connection).
Features
- Strong Suction Mount that is easy to remove and reinstall (unlike most sticky mount that will loose suction with time)
- Quick Releases Strong Magnetic Cradle Dock that will clench on to EZ MAGnet compatible radar detectors (compatible with Escort IX, Escort IXc, Redline EX, Max 360c, and 2020 Max360 Max 3 models that use EZMAG connection)
- ONE YEAR MANUFACTURE DIRECT REPLACEMENT WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 3.00 x 3.00 x 3.00 inches
See On Amazon #7
LycoGear Heavy Duty Magnetic Mount Aluminum Smartphone Holder w/Security Tether for Smartphones *Best for Motorcycle Snow Mobile Forklift Pillar Gym Workout or Anything Magnet Stick on
Asin: B09HTCPFZP | Model: MT-MG1420+HLD-A1+STP1 | PartNumber: MT-MG1420+HLD-A1+STP1
Quality Build: Our Holder Is Crafted With Aluminum Alloy And Soft Silicone At The End, The Magnetic Base Mount Has A Rubber-Coated Base & Silicon Tether That Secures Your Phone.
Compatible Phone Models: Ram Mount.
Connector Type: 6X 10Mm Super Strong N52 Magnets.
Compatible With Almost Any Phone, Including: Iphone 13 12 11 Pro Max, Galaxy S22 S21 S20 Ultra Fe, Oneplus & Many Others.
Safe & Secure Under Any Road Condition: Base Comes With 6 10Mm Magnet Circular Setup Generates A Powerful Closed Magnetic Field That Can Withstand Up To 20Lbs. With The Included Smartphone Tether Uneven And Rough Roads, Its Will Secure Your Phone Tightly!.
Features
- Easy Installation, Just place the strong magnetic base on to any flat surface that magnet can stick on to then pop in your phone (Best for Motorcycle, Gym, Kitchen, Bathroom, Snow Mobile, Garage & any other place you can think of)
- SAFE & SECURE UNDER ANY ROAD CONDITION: Base comes with 6 10mm magnet circular setup generates a powerful closed magnetic field that can withstand up to 20lbs. With the included smartphone tether uneven and rough roads, its will secure your phone tightly!
- Quality Build: Our Holder is crafted with aluminum alloy and soft silicone at the end, the magnetic Base Mount has a rubber-coated base & Silicon Tether that secures your phone
- Compatible with almost any phone, including: iphone 13 12 11 Pro Max, Galaxy S22 S21 S20 Ultra FE, OnePlus & Many others
- Compatible phone models: Ram Mount
- Connector type: 6x 10mm Super strong N52 magnets
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 2.00 x 3.00 x 3.00 inches | Weight: 0.25 Pounds
Warranty: 1 year warranty
See On Amazon #8
Lycogear Car Windshield Super Suction Cup Bracket Compatible for UNIDEN R1 R2 R3 R4 R7 R8 R9 DFR3 DFR6 DFR7 DFR8 DFR9 Radar Detector (Only for Uniden Models), Easy to Install
Asin: B0CMBH75H7 | Model: MT-RX3+KLP-UN01 | PartNumber: MT-RX3+KLP-UN01
Easy To Install And Can Be Reused In Multiple Vehicles,It Only Needs To Be Washed With Clean Water And Air Dried To Maintain Its Original Suction..
One Year Manfuacture Warranty.
Compatible Only With Uniden Radar Detectors: Uniden R1, R2, R3, R4, R6, R7, R8, Lrd300, Lrd350, Lrd400, Lrd450, Lrd500, Lrd550, Lrd600, Lrd650, Lrd700, Lrd750, Lrd800, Lrd850, Lrd900, Lrd937, Lrd950, Lrd6199 Sw, Lrd6499 Sw, Df1, Dfr2, Dfr3, Dfr4, Dfr5, Dfr6, Dfr7, Dfr8, Dfr9..
Radar Detector Suction Cup Holder Can Adjust The Optimal Position Between The Detector And The Windshield.
Features
- Enhanced Super Suction Mounbt with larger base, which have stronger suction force and more stable installation. It is fearless of extreme cold and heat, and can firmly adhere to the windshield.
- Radar detector suction cup holder can adjust the optimal position between the detector and the windshield
- Easy to install and can be reused in multiple vehicles,It only needs to be washed with clean water and air dried to maintain its original suction.
- Compatible only with Uniden radar detectors: Uniden R1, R2, R3, R4, R6, R7, R8, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199 SW, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9.
- ONE YEAR MANFUACTURE WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year
See On Amazon #9
LycoGear Enhanced Strong Windshield Suction Cup Mount for Escort MAX MAX2 2 or Version 1 Max360 Radar Detector w/Slide in Metal Plate Connection (Not Compatible with Other Models)
Asin: B0CP8CPQ9G
Easy To Install With Adjustment Thumb Screw Knob To Lock Radar Into Position, Superior Performance Under Extreme Heat And Cold Weather.
This Mount Is Only Compatible With The Older Metal Plate Slide In Connection Radar, It Is Not Compatible With Max360c Or The 2020 Revised Max360 That Use The Magnetic Dock Connection.
New And Improve Perfect Fit Metal Slide In Metal Cradle That Will Not Vibrate Or Shake During Driving.
Features
- Brand New Large Polyurethane Suction base w/strong adherence to the windshield (Non Permanent, Resuable Suction Base)
- NEW AND IMPROVE PERFECT FIT METAL SLIDE IN METAL CRADLE THAT WILL NOT VIBRATE OR SHAKE DURING DRIVING
- Easy to install with adjustment thumb screw knob to lock radar into position, Superior performance under extreme heat and cold weather
- This Mount is only compatible with the older Metal Plate Slide in connection radar, it is NOT compatible with MAX360C or the 2020 revised Max360 that use the Magnetic dock Connection
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 2.00 x 2.00 x 2.00 Inches
See On Amazon #10
LycoGear Ehnanced Dual Ball Joint Adjust Suction Cup Bracket Compatible for UNIDEN R1 R2 R3 R4 R7 R8 R9 DFR3 DFR6 DFR7 DFR8 DFR9 Radar Detector
Asin: B0CSQMK37H | Model: MT-G6+GPBALL-16+KLP-UN01 | PartNumber: MT-G6+GPBALL-16+KLP-UN01
Easy To Install And Can Be Reused In Multiple Vehicles,It Only Needs To Be Washed With Clean Water And Air Dried To Maintain Its Original Suction..
One Year Manfuacture Warranty.
Compatible Only With Uniden Radar Detectors: Uniden R1, R2, R3, R4, R6, R7, R8, R9, Lrd300, Lrd350, Lrd400, Lrd450, Lrd500, Lrd550, Lrd600, Lrd650, Lrd700, Lrd750, Lrd800, Lrd850, Lrd900, Lrd937, Lrd950, Lrd6199 Sw, Lrd6499 Sw, Df1, Dfr2, Dfr3, Dfr4, Dfr5, Dfr6, Dfr7, Dfr8, Dfr9..
Radar Detector Suction Cup Holder Can Adjust The Optimal Position Between The Detector And The Windshield.
Features
- Enhanced Super Suction Mounbt with dual ball joint adjustment
- Radar detector suction cup holder can adjust the optimal position between the detector and the windshield
- Easy to install and can be reused in multiple vehicles,It only needs to be washed with clean water and air dried to maintain its original suction.
- Compatible only with Uniden radar detectors: Uniden R1, R2, R3, R4, R6, R7, R8, R9, LRD300, LRD350, LRD400, LRD450, LRD500, LRD550, LRD600, LRD650, LRD700, LRD750, LRD800, LRD850, LRD900, LRD937, LRD950, LRD6199 SW, LRD6499 SW, DF1, DFR2, DFR3, DFR4, DFR5, DFR6, DFR7, DFR8, DFR9.
- ONE YEAR MANFUACTURE WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year
See On Amazon #11
LycoGear Strong Suction Mount w/Magnetic Dock Cradle for Cobra RAD 700i Dual Pro 360 & Road Scout Radar Detectors (EZ Magnet Connection)
Asin: B0CRH5K8TD | Model: COBRA-RAD-700i-DUAL-PRO-ROAD-SCOUT | PartNumber: COBRA-RAD-700i-DUAL-PRO-ROAD-SCOUT
Quick Releases Strong Magnetic Cradle Dock That Will Clench On To Ez Magnet Compatible Radar Detectors (Compatible With Cobra Dual Pro 360, Cobra Road Scout, Cobra Rad 700I Models That Use Ezmag Connection).
One Year Manufacture Direct Replacement Warranty.
Strong Suction Mount That Is Easy To Remove And Reinstall (Unlike Most Sticky Mount That Will Loose Suction With Time).
Features
- WHY PURCHASE FROM LycoGear- We believe in price perceived value and quality products should not cost a fortune. Our products are designed to satisfy customers in all aspect at reasonable price
- Strong Suction Mount that is easy to remove and reinstall (unlike most sticky mount that will loose suction with time)
- Quick Releases Strong Magnetic Cradle Dock that will clench on to EZ MAGnet compatible radar detectors (compatible with Cobra Dual Pro 360, cobra road scout, cobra RAD 700i models that use EZMAG connection)
- ONE YEAR MANUFACTURE DIRECT REPLACEMENT WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 3.00 x 3.00 x 3.00 inches
See On Amazon #12
LycoGear Enhanced Windshield Suction Cup Mount for Cobb Bama SCT X4 SF4 Livewire 9600 AccessPort v3 Edge CT CTS Diablo Performance Tuner Programmer (Incluides Single Tab & Dual Tab Adapter)
Asin: B0BZZT19GY | Model: MT-D+SW8_LYHC | PartNumber: MT-D+SW8_LYHC
Single T Joint Compatible To Single T Connection Auto Tuner Programmer Flasher Like Bully Dog Hd Triple Watchdog, H&S Mini Maxx Sct Livewire 9600 Ts Flash.
One Year Manufacture Direct Replacement Warranty.
Dual Tab Adapter Is Compatible With Cobb Tuning Accessport V3 Bama Sct X4 Sf4 Tuner Programmer Edge Cs And Cts Evolution, Edge Evolution Insight Juice, Edge Juice With Attitude.
Well Made Suction Cup Mount With The Single T Ending Needed To Fit The Slot On The Back Of The Monitor.
Features
- Brand New from Lycogear, Easy to Setup Suction Mount Designed for Most Major Auto Tuner Programmers with Single T & Dual Tab Connections
- Well made suction cup mount with the single T ending needed to fit the slot on the back of the monitor
- Single T Joint compatible to single T Connection Auto tuner Programmer Flasher like Bully Dog HD Triple WatchDog, H&S Mini Maxx SCT Livewire 9600 TS Flash
- Dual Tab adapter is compatible with COBB Tuning AccessPORT V3 Bama SCT X4 SF4 Tuner Programmer Edge CS and CTS Evolution, Edge Evolution Insight Juice, Edge Juice with Attitude
- One YEAR Manufacture Direct Replacement Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: Lycogear
Dimensions: 1.18 x 2.00 x 2.00 inches
Warranty: 1 Year
See On Amazon #13
ChargerCity Enhanced X-7006 Dual Tab Strong Suction Mount for SCT X4 7015 7416 7215 Tuner Programmer
Asin: B08V3P9XTK | Model: MT-D2+SW1_LHC | PartNumber: MT-D2+SW1_LHC
Allows Your To Mount Your X4 Programmer Without Blocking Your View Of The Road.
Allows Your To Mount Your X4 Programmer Without Blocking Your View Of The Road.
Features
- Fit all factory stock SCT X4 7015 7416 7215 programmer without blocking your view of the road
- Allows your to mount your X4 programmer without blocking your view of the road
- Allows your to mount your X4 programmer without blocking your view of the road
- See more on Amazon...
Brand: ChargerCity | Manufacturer: Lycogear
Dimensions: 4.00 x 2.00 x 2.00 inches
See On Amazon #14
LycoGear Radar Detector Easy Magnet Adhesive Mount for Escort MAX360C MAX 3 EX, iX, iXc, Beltronics GT-1, GT-360 Cobra DualPro 360 Radar Detectors
Asin: B08XWQZDS5
Tilt Adjustable Mount Can Be Adjusted To Suit Your Viewing.
Installs Easily Without Tools.
Easy To Install With Turn To Lock Mount Into Position, 3M Adhesive Base Is Superior Performance Under Extreme Heat And Cold Weather.
Features
- NEW AND IMPROVE PERFECT FIT MAGNETIC CRADLE THAT WILL FIT LIKE EZ MAG FACTOY MOUNT
- Easy to install with turn to lock mount into position, 3M Adhesive Base is Superior performance under extreme heat and cold weather
- Tilt Adjustable Mount can be adjusted to suit your viewing
- Installs easily without tools
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
See On Amazon #15
LycoGear Sun Visor Car Clip Holder Mount for Garmin Drive DriveSmart 50 51 52 60 61 62 63 Nuvi 55 56 57 57LM 57LMT 58 58LM 65 66 67 68 2699 2689 2639 2597 2558 2557 LM LMT LMTHD GPS
Asin: B07QJ1STG3 | Model: MT-SUN2+KLP-L4+KLP-NUV42_LYHC | PartNumber: MT-SUN2+KLP-L4+KLP-NUV42_LYHC
The Sun Visor Mount Can Be Easily Removed And Stored.
Base 17Mm Ball Connection Is Compatible With All Garmin Nuvi / Drive / Drivesmart/Driveluxe/Drive Assist Gps Devices With 17Mm Swivel Ball Mounting Pattern.
Features
- Brand New in NO FUZZ NO MESS Packaging
- Base 17mm Ball Connection is Compatible with all Garmin Nuvi / Drive / DriveSmart/DriveLuxe/Drive Assist GPS devices with 17mm swivel ball mounting pattern
- The sun visor mount can be easily removed and stored
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 0.39 x 3.00 x 2.00 inches
See On Amazon #16
LycoGear Radar Detector Easy Connect Adhesive Mount for Passport 9500ix 9500i Passport 8500 7500 X50 x70 x80 Solo S2 S3 S4 SC 55 s75 s75g Radar Detectors
Asin: B08XYC5TDX | Model: GP18+KLP9600_LYHC | PartNumber: GP18+KLP9600_LYHC
Compatible With Only With Following Passport Radar Detectors 9500Ix, 9500I, 9500I, 8500, X50 Blue Red, 7500, 7500S, 6800, Sti, C65 Solo S2, Solo S3, Solo S4, Sc 55, S75.
Please Visit The Following Asin B008mhbzgg For Your Radar Detector Charging Needs.
Easy To Install With Turn To Lock Mount Into Position, 3M Adhesive Base Is Superior Performance Under Extreme Heat And Cold Weather.
Features
- NEW AND IMPROVE PERFECT FIT Metal Cradle that will custom fit your Passport Radar Detectors (Please verify compatibilities)
- Easy to install with turn to lock mount into position, 3M Adhesive Base is Superior performance under extreme heat and cold weather
- COMPATIBLE WITH Only with following Passport Radar Detectors 9500ix, 9500i, 9500i, 8500, X50 BLUE RED, 7500, 7500S, 6800, STI, C65 SOLO S2, SOLO S3, SOLO S4, SC 55, S75
- Please visit the following ASIN B008MHBZGG for your radar detector Charging Needs
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 1.18 x 1.18 x 0.79 Inches
Warranty: One Year
See On Amazon #17
LycoGear Heavy Duty Strong Suction Mount w/N60 Magnetic Cradle Holder for Bully Dog BDX/SCT BDX Pop Auto Engine Tuner Programmer (Also Compatible with Smartphone Socket Holder)
Asin: B07Y2CNXPM | Model: MT-D16+KLP-N16_LYHC | PartNumber: MT-D16+KLP-N16_LYHC
Strong Magnets: Extra Powerful Rare-Earth Neodymium Magnets Provide A Secure Grip To Your Devices And Are 100% Device Safe..
Optimal Viewing Angle: Dual -Axis, 360 Degree Adjustable Head With Enhanced Soft Touch Rubber Lock-Nut For Secure Positioning And Optimal Viewing From Almost Any Angle..
Heavy Duty Design - Heavy Duty Strong Suction Mount W/N60 Magnetic Cradle Holder For Your Device (Sct Bdx / Bully Dog Bdx / Smartphones Iphone 12 11 Xr Xs Galaxy S21 / Socket Holder Compatible).
Features
- Heavy Duty design - Heavy Duty Strong Suction Mount w/N60 Magnetic Cradle Holder for your Device (SCT BDX / Bully Dog Bdx / Smartphones iphone 12 11 XR XS Galaxy S21 / Socket Holder Compatible)
- Heavy Duty design - Heavy Duty Strong Suction Mount w/N60 Magnetic Cradle Holder for your Device (SCT BDX / Bully Dog Bdx / Smartphones iphone 12 11 XR XS Galaxy S21 / Socket Holder Compatible)
- STRONG MAGNETS: Extra powerful Rare-Earth neodymium magnets provide a secure grip to your devices and are 100% device safe.
- OPTIMAL VIEWING ANGLE: Dual -Axis, 360 Degree adjustable head with enhanced soft touch rubber lock-nut for secure positioning and optimal viewing from almost any angle.
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 4.00 x 2.00 x 2.00 inches
See On Amazon #18
LycoGear Radar Detector Easy Connect 3M Adhesive Mount for All Whistler Radar Detector
Asin: B0CVL6RNNW | Model: GP18+KLP-WH01_LYHC | PartNumber: GP18+KLP-WH01_LYHC
Easy To Install With Turn To Lock Mount Into Position, 3M Adhesive Base Is Superior Performance Under Extreme Heat And Cold Weather.
1 Year Warrranty.
Compatible With All Whistler Radar Detectors.
New And Improve Perfect Fit Metal Cradle That Will Custom Fit Your Uniden Radar Detectors (Please Verify Compatibilities).
Features
- WHY PURCHASE FROM LycoGear- We believe in price perceived value and quality products should not cost a fortune. Our products are designed to satisfy customers in all aspect at reasonable price.
- NEW AND IMPROVE PERFECT FIT Metal Cradle that will custom fit your Uniden Radar Detectors (Please verify compatibilities)
- Easy to install with turn to lock mount into position, 3M Adhesive Base is Superior performance under extreme heat and cold weather
- COMPATIBLE WITH ALL Whistler Radar Detectors
- 1 Year Warrranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year Warranty
See On Amazon #19
22mm Ball to 17mm Ball Adapter for Garmin DriveSmart 86 RV 890 1090 dezl OTR800 OTR1000
Asin: B0CN1LXD3X | Model: SW5+SW142022+RNG | PartNumber: SW5+SW142022+RNG
Simply Screw It Onto The Existing Mount And It Will Fit The 22Mm Socket On The Back Of The Cradle That Came With Your Gps..
One Year Warranty.
Please Note: These Only Fit Larger Gps Devices That Utilize The 22Mm Ball Size. Only The Items Listed In The Title Will Fit This Adapter. The Majority Of Garmin Gps Devices Use The Smaller 17Mm Ball Size..
The 22Mm To 17Mm Ball Adapter Is Perfect For Turning Your Old Reliable Garmin Mount Into One That Is Compatible With A New Larger Gps..
Features
- Brand New 17mm ball joint to 22mm ball joint adapter
- The 22mm to 17mm ball adapter is perfect for turning your old reliable Garmin mount into one that is compatible with a new larger GPS.
- Simply screw it onto the existing mount and it will fit the 22mm socket on the back of the cradle that came with your GPS.
- Please Note: These only fit Larger GPS devices that utilize the 22mm ball size. Only the items listed in the title will fit this adapter. The majority of Garmin GPS devices use the smaller 17mm ball size.
- One Year Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 3.00 x 1.00 x 1.00 inches
Warranty: 30 Days
See On Amazon #20
LycoGear Radar Detector Easy Connect 3M Windshield Adhesive Mount for Cobra iRadar ESD SPX RAD 480i 450 350 380 7800BT Radar Detector
Asin: B0CVNM1N4K | Model: GP18+KLP-MAX2_LYHC | PartNumber: GP18+KLP-MAX2_LYHC
Easy To Install With Turn To Lock Mount Into Position, 3M Adhesive Base Is Superior Performance Under Heat And Cold Weather.
One Year Warranty.
3M Adhesive Base To Ensure Quality Of The Mount.
New And Improve Perfect Fit Metal Cradle That Will Custom Fit Your Cobra Spx 5000 5300 5400 5500 6500 6600 6700 7700 7800 7800Bt Iradar Esd Spx Rad 480I 450 380 Radar Detectors (Not Compatible With Other Models)).
Features
- WHY PURCHASE FROM LycoGear- We believe in price perceived value and quality products should not cost a fortune. Our products are designed to satisfy customers in all aspect at reasonable price.
- NEW AND IMPROVE PERFECT FIT Metal Cradle that will custom fit your Cobra SPX 5000 5300 5400 5500 6500 6600 6700 7700 7800 7800BT iRadar ESD SPX RAD 480i 450 380 Radar Detectors (Not compatible with other Models))
- Easy to install with turn to lock mount into position, 3M Adhesive Base is Superior performance under heat and cold weather
- 3M Adhesive Base to ensure quality of the mount
- One year warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year Warranty
See On Amazon #21
LycoGear Ehnanced Dual Ball Joint Adjust Suction Cup Bracket Compatible for Escort Passport 9500ix, 9500i, 8500, 8500 X50, X70, X80, Solo S2, S3, S75G, STi and Beltronics RX-65 Radar Detector
Asin: B0CW11ZLPL | Model: MT-G6+GPBALL-16+KLP-9600 | PartNumber: MT-G6+GPBALL-16+KLP-9600
Easy To Install And Can Be Reused In Multiple Vehicles,It Only Needs To Be Washed With Clean Water And Air Dried To Maintain Its Original Suction..
One Year Manfuacture Warranty.
Compatible With Whistler Radar Detectors: Compatible With All Whistler Radar Detectors.
Radar Detector Suction Cup Holder Can Adjust The Optimal Position Between The Detector And The Windshield.
Features
- Enhanced Super Suction Mounbt with dual ball joint adjustment
- Radar detector suction cup holder can adjust the optimal position between the detector and the windshield
- Easy to install and can be reused in multiple vehicles,It only needs to be washed with clean water and air dried to maintain its original suction.
- Compatible with Whistler radar detectors: Compatible with All Whistler radar detectors
- ONE YEAR MANFUACTURE WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year
See On Amazon #22
LycoGear Suction Cup Mount & Cable Kit for Passport 9500 8500 x50 x70 s75 Solo S4 S3 S2 Radar Detector (Not for Models not Listed)
Asin: B0B9HS2D27
Compatible Beltronics Radar: Gx65 Red，Gx55, Rx65, Rx55, V6, V8, V10, V12, Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895, Express 795, Sti Magnum, Sti Driver..
Not Compatible Radar With Models Or Brands Not Listed.
Note: Don't Place The Mount In Or Near The Deployment Area Of The Airbag, And Don't Install It In A Position That Obstructs Road Observation..
Compatible Models: Passport 9500I, Passport 8500, X50, Passport 8500, Passport 7500S, Passport 7500, Passport S55, S75, 6800, 5000, 4600, 4500, And 4200 Radar, Solo S2, Solo S3, Solo S4..
Features
- Brand New Windshield Mount & Power Cable Kit for Selected Escort Passport and Beltronics Radar Detectors
- Compatible Models: Passport 9500i, Passport 8500, X50, Passport 8500, Passport 7500S, Passport 7500, Passport S55, S75, 6800, 5000, 4600, 4500, and 4200 Radar, Solo S2, Solo S3, Solo S4.
- Compatible Beltronics Radar: GX65 Red GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895, Express 795, STi Magnum, STi Driver.
- Note: Don't place the mount in or near the deployment area of the airbag, and don't install it in a position that obstructs road observation.
- Not compatible Radar with Models or Brands not listed
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year
See On Amazon #23
LycoGear Radar Detector Rearview Mirror Stem Mount w/Magnetic Cradle for Escort IX IXc Max360C Max3 Redline EX Beltronics GT360 Cobra DualPro Radar Detectors (Require 1" Stem Space to Install)
Asin: B08K46HSMG | Model: LycoGear | PartNumber: LycoGear
Rear-View Mirror Rod Radar Bracket Can Be Freely Adjusted To The Ideal Position, And The Angle Is Flexible To Avoid Blocking The Line Of Sight And Ensure Driving Safety..
Compatible With Escort Ix、 Ixc、 Max 3、 Max360c、2020 Max 360 , Redline Ex Beltronics Gt360 Cobra Dualpro Radar Detector.
Our Quickrelease Magnetic Dock Is Compatible With Following Ezmag Compatible Radar Detectors ( Escort Ix, Escort Ixc, Redline Ex, Escort Max360c Max 360C, And 2020 Max360 Models That Use Ezmag Connection).
Features
- No More Troublesome Suction Cups and Install in Most Cars min Minutes ****PLEASE MAKE SURE THAT YOU HAVE AT LEAST 1 INCH OF STEM SPACE TO INSTALL THIS MOUNT*** (Not Compatible w/Corvette & vehicle with short stem)
- Our QuickRelease Magnetic Dock is Compatible with following EzMag compatible radar detectors ( Escort IX, Escort IXc, Redline EX, Escort Max360c Max 360c, and 2020 Max360 models that use EZMAG connection)
- Rear-view mirror rod radar bracket can be freely adjusted to the ideal position, and the angle is flexible to avoid blocking the line of sight and ensure driving safety.
- Compatible with Escort IX IXc Max 3 Max360C 2020 Max 360 , Redline EX Beltronics GT360 Cobra DualPro Radar Detector
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 0.39 x 2.00 x 2.00 inches
See On Amazon #24
LycoGear Radar Detector Rearview Mirror Stem Mount for for All Whistler Radar Detector (CR DE SL SRT XT XTR LRD Z & More)
Asin: B0CVNJCVTZ | Model: BKE-RD11+GPBALL-16+KLP-WH01_LYHC | PartNumber: BKE-RD11+GPBALL-16+KLP-WH01_LYHC
No More Troublesome Suction Cups And Install In Most Cars Min Minutes ****Please Make Sure That You Have At Least 1 Inch Of Stem Space To Install This Mount*** (Not Compatible W/Corvette & Vehicle With Short Stem).
1 Year Warrranty.
Compatible With All Whistler Radar Detectors.
New And Improve Perfect Fit Metal Cradle That Will Custom Fit Your Uniden Radar Detectors (Please Verify Compatibilities).
Features
- WHY PURCHASE FROM LycoGear- We believe in price perceived value and quality products should not cost a fortune. Our products are designed to satisfy customers in all aspect at reasonable price.
- NEW AND IMPROVE PERFECT FIT Metal Cradle that will custom fit your Uniden Radar Detectors (Please verify compatibilities)
- No More Troublesome Suction Cups and Install in Most Cars min Minutes ****PLEASE MAKE SURE THAT YOU HAVE AT LEAST 1 INCH OF STEM SPACE TO INSTALL THIS MOUNT*** (Not Compatible w/Corvette & vehicle with short stem)
- COMPATIBLE WITH ALL Whistler Radar Detectors
- 1 Year Warrranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year Warranty
See On Amazon #25
LycoGear Ehanced Car Truck Limo Super Suction Mount Holder for Cobra iRadar ESD SPX RAD 480i 450 380 7800BT Radar Detector (Larger Weatherproof Cup Base for Superior Suction Power)
Asin: B0CMBSP4LC
Suction Cup Base Is Made Of Industrial Abs Material For Heat And Cold Weather Restistance.
One Year Warranty.
Compatible With Cobra Iradar Rad 480I 450 380 Spx 5000 5300 5400 5500 6500 6600 6700 7700 7800 7800Bt Radar Detectors.
Under All Weather Conditions (Extremely Hot/Cold/Wet/Dry), Its Powerful Vacuum Suction Can Firmly Adhere To The Windshield Or Dashboard..
Features
- Enhanced Larger Suction Cup Base structure design, suction cup holder is equipped with an lock lever to easy install or unstall the mount withu optimal suction power
- Under all weather conditions (extremely hot/cold/wet/dry), its powerful vacuum suction can firmly adhere to the windshield or dashboard.
- Suction cup base is made of industrial ABS material for heat and cold weather restistance
- Compatible with Cobra iRadar RAD 480i 450 380 SPX 5000 5300 5400 5500 6500 6600 6700 7700 7800 7800BT radar detectors
- ONE YEAR WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
See On Amazon #26
Heavy Duty Aluminum Bar Pole Boat Ham Bike Motorcycle Handle bar Mount with AMPS 2/4 Hole Pattern Ham CB Pro Satellite Radio Garmin Zumo XT mounting Device (expend from .35" to 2.25" inch Wide)
Asin: B0BG6D6LK8 | Model: B07YBKWYMM | PartNumber: B07YBKWYMM | Ean: 0855762006322 | UPC: 855762006322
Compatible With Devices Having A 4 Hole Amps Pattern, Including Vehicle Specific Mounts, Icom Yaesu Cb Ham Radio, Cameras, Garmin Zumo Xt Gps Devices, Audio/Video Receivers, Or Sirius Satellite Radios.
One Year Manufactory Warranty.
Made With Heavy Duty Industrial Aluminum Metal Alloy Fite Round Or Shaped Bar Up To 2 Inch Wide.
Features
- Brand New in No Mess No Fuzz Packaging
- Made with Heavy Duty Industrial Aluminum Metal Alloy fite Round or shaped bar up to 2 inch wide
- Compatible with devices having a 4 Hole AMPS pattern, including vehicle specific mounts, ICOM Yaesu CB Ham Radio, cameras, Garmin Zumo XT GPS devices, audio/video receivers, or Sirius satellite radios
- One Year Manufactory Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Dimensions: 4.00 x 3.00 x 2.00 inches
Warranty: 1 Year Warranty
See On Amazon #27
ELD Heavy Duty Limo Truck Semi Fleet Floor Seat Bolt/Drill Mount Compatible with Garmin 22mm Cradle for dezl OTR1000 OTR1010 OTR800 OTR810 RV 1090 1095 890 895 DriveSmart 86 8"-10" Truck GPS
Asin: B0CTP2BBZN | Model: FLMT22_NSW | PartNumber: FLMT22_NSW
Compatible With Garmin Dezl Otr 1000 Otr 1010 Otr 800 Otr 810 Rv 1090 095 890 895 Drivesmart 86 8"-10" Truck Gps Navigator (Mount Only Bracket Cradle Is Not Included).
Ony Year Warranty.
Compatible With All B09qxzcw9c 010-13199-02 Garmin 22Mm Ball Compatible Gps/Device Mount (Bracket Cradle Is Not Included).
Features
- Brand New in LycoGear Packaging
- Compatible with all B09QXZCW9C 010-13199-02 Garmin 22mm ball compatible GPS/Device mount (bracket cradle is NOT included)
- Compatible with Garmin dezl OTR 1000 OTR 1010 OTR 800 OTR 810 RV 1090 095 890 895 DriveSmart 86 8-10 TRUCK GPS NAVIGATOR (Mount only bracket cradle is NOT included)
- Ony Year Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
See On Amazon #28
LycoGear Enhanced Car Windshield Suction Cup Mount for H&S Mini Maxx Tuner Programmer
Asin: B0CMZPFP6N | Model: 75 | PartNumber: 75
Single Tab Adapter Designed To Fit The Dual Slots On The Back Of The Magnetic Cradle That Came With.
One Year Manufacture Warranty.
Enhanced Strong Suction Mount For H&S Mini Maxx Tuner Programmer.
Features
- Brand New
- Enhanced Strong Suction Mount for H&S Mini Maxx Tuner Programmer
- Single Tab adapter designed to fit the dual slots on the back of the magnetic cradle that came with
- One Year Manufacture Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
See On Amazon #29
LycoGear Car Windshield Super Suction Cup Mount Bracket Holde for All Whistler Radar Models (CR DE XTR LRD & More)
Asin: B0CVL4FF9C | Model: MT-RX3+KLP-UN01 | PartNumber: MT-RX3+KLP-UN01
Easy To Install And Can Be Reused In Multiple Vehicles,It Only Needs To Be Washed With Clean Water And Air Dried To Maintain Its Original Suction..
One Year Manfuacture Warranty.
Compatible With All Whistler Radar Detectors.
Radar Detector Suction Cup Holder Can Adjust The Optimal Position Between The Detector And The Windshield.
Features
- Enhanced Super Suction Mounbt with larger base, which have stronger suction force and more stable installation. It is fearless of extreme cold and heat, and can firmly adhere to the windshield.
- Radar detector suction cup holder can adjust the optimal position between the detector and the windshield
- Easy to install and can be reused in multiple vehicles,It only needs to be washed with clean water and air dried to maintain its original suction.
- Compatible with All Whistler Radar Detectors
- ONE YEAR MANFUACTURE WARRANTY
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year
See On Amazon #30
LycoGear Enhancd Strong Car Windshield Suction Cup Mount for Bully Dog GT, HD GT and Watchdog Monitor, Bully Dog Triple Dog GT w/Ball Socket Adapter to Allow Best Viewing Position
Asin: B0CN63SNNT | Model: Triple GT HD Watchdog Bully Dog | PartNumber: Triple GT HD Watchdog Bully Dog
Dual Ball Joint Connection To Allow Best Viewing Position.
One Year Warranty.
Single Tab Joint Is Compatible With All Single Tab Device.
Features
- Enhanced Strong Suction Mount for Bully Dog GT, HD GT and Watchdog Monitor, Bully Dog Triple Dog GT
- Single Tab Joint is compatible with all single tab device
- Dual Ball Joint Connection to allow best Viewing Position
- One Year Warranty
- See more on Amazon...
Brand: LycoGear | Manufacturer: LycoGear
Warranty: 1 Year
See On Amazon