Mapp Caster - Buying Guide
Last Updated: 05/05/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Stryker Stretcher 6" x 2" Replacement Wheels - Set of 4 - Mapp Caster
Asin: B082P82TTM
The Inside Diameter Of These Wheels Is 7/16 Of An Inch With A Hub Length Of 2-1/2 Inches.
Chemical, Impact & Great Wear Resistant With Sealed Ball Bearings Makes It A Premium Caster Wheel.
Thermoplastic Rubber Tread Protects Floors, Reject Debris & Conquer All Types Of Terrain (550 Lbs. Capacity).
This Wheel Is Designed To Fit On Stryker Stretcher Caster Rigs & Mapp Caster's Replacement Rigs.
Features
- Fits on Stryker Stretchers 6060, 6070, 6080, 6082, 6083, 6086, 6090 6500, 6506, 6516 & much more
- This wheel is designed to fit on Stryker stretcher caster rigs & Mapp Caster's replacement rigs
- The inside diameter of these wheels is 7/16 of an inch with a hub length of 2-1/2 inches
- Thermoplastic rubber tread protects floors, reject debris & conquer all types of terrain (550 lbs. capacity)
- Chemical, impact & great wear resistant with sealed ball bearings makes it a premium caster wheel
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Dimensions: 6.00 x 6.00 x 2.00 inches
See On Amazon #2
U-Boat Platform Truck Replacement Caster & Wheel Kit with Easy Rolling Ball Bearings & Hardware
Asin: B07R5BZ4T6
All Mounting Hardware Is Included - 1/2" X 3-3/8" Long Axle For The 8" Wheels And 5/16" X 1" Long Bolts With Washers And Nuts For Attaching The Casters.
3,000 Pounds Of Capacity.
Non-Marking Floor Safe Wheels That Roll Smoothly And Quietly.
Kit Comes With Two 8" X 2" Polyurethane Wheels For The Middle And Four 4" Polyurethane Wheel Casters For The Corners.
Features
- Replacment wheels for most U-boat carts and tilt carts that are commonly found in places like a grocery store
- Kit comes with two 8 x 2 polyurethane wheels for the middle and four 4 polyurethane wheel casters for the corners
- All mounting hardware is included - 1/2 x 3-3/8 Long Axle for the 8 wheels and 5/16 x 1 long bolts with washers and nuts for attaching the casters
- Non-marking floor safe wheels that roll smoothly and quietly
- 3,000 Pounds of Capacity
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: MappCaster.com
See On Amazon #3
Mapp Caster Mop Bucket Replacement Casters Set of 24 are Compatible with Rubbermaid Models 7570-L2, 7571,7580,7581, Wavebrake & More (Floor Safe) (24)
Asin: B08B9Q3R3B
Floor Safe Non-Marking Wheels That Are Resistant To Chemicals, Cleaning Solvents, Steam & Water.
150 Lbs Of Capacity Per Caster, .6 Of Inch Wide Socket-Like Stem Are Compatible With Rubbermaid Mop Buckets.
The 3" Diameter Wheel Has A Soft Tread That Provides A Quiet & Cushioned Ride.
Plug & Play Design, Pull Out The Old Casters & Press In The New Casters In To Your Mop Bucket.
Features
- This set of 24 casters are compatible with Rubbermaid models 7570-L2, 7571,7580, WaveBrake & more
- Plug & play design, pull out the old casters & press in the new casters in to your mop bucket
- Floor safe non-marking wheels that are resistant to chemicals, cleaning solvents, steam & water
- The 3 diameter wheel has a soft tread that provides a quiet & Cushioned ride
- 150 lbs of capacity per caster, .6 of inch wide Socket-like stem are compatible with Rubbermaid mop buckets
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 12.00 Pounds
See On Amazon #4
4 Replacement Heavy Duty Casters for GoJak Models 5000, 5211, 5400 Set of 4
Asin: B09415V5DM
4 Inch Diameter Heavy Duty Plastic Wheels Are Resistant To Oil, Grease & Chemicals.
Includes 4 Nuts & 4 Lock Washers To Fasten The Casters To Frame Of The Dolly.
The Wheel’S Crowned Tread Allows The Casters To Easily Pivot & Assist With Moving Your Vehicle.
½ Inch Diameter Stem By 1 Inch Long Stem Bolts Right Up To The Frame Of The Dolly.
Features
- These casters fit on GoJak models 5000, 5211, 5400
- inch diameter stem by 1 inch long stem bolts right up to the frame of the dolly
- 4 Inch diameter heavy duty plastic wheels are resistant to oil, grease & chemicals
- The wheel s Crowned Tread allows the casters to easily pivot & assist with moving your vehicle
- Includes 4 nuts & 4 lock washers to fasten the casters to frame of the dolly
- See more on Amazon...
Brand: Mapp Caster
Weight: 7.00 Pounds
See On Amazon #5
Mapp Caster Shopping Cart Replacement Wheels with Axles Set of 4
Asin: B07FSTF3WF
Non-Marking Floor Safe Wheel That Rolls Smoothly And Quietly - 250 Lbs Capacity (Each).
1-9/16" Hub Length (How Wide The Wheel Is At Its Widest Point).
Comes With 5/16" Bolt That Is 2-1/4" Long And Includes Matching Lock Nut.
The Wheel Measures 5" In Diameter And Has A 1-1/4" Tread Width.
Features
- Replacement wheel for most styles of shopping carts.
- The wheel measures 5 in diameter and has a 1-1/4 tread width
- Non-Marking floor safe wheel that rolls smoothly and quietly - 250 Lbs Capacity (each)
- Comes with 5/16 Bolt that is 2-1/4 long and includes matching lock nut
- 1-9/16 Hub Length (how wide the wheel is at its widest point)
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #6
Premium 5" Metro Shelving Brake Casters with Floor Protective Wheels - Set of 4 (Two Brake)
Asin: B08XQYGZVB
Premium Non-Marking Polyurethane Wheels Provide Excellent Protection To Floors Like Hardwood & Tile.
300 Lbs. Of Capacity Per Caster.
The Wheel's Smooth Crowned Tread Will Not Snag On Carpet & Allows The Casters To Effectively Pivot.
The Casters 7/8” Grip Ring Stem That Allows Easy Installation & Removal.
Features
- Fits inside the tube framing of metro shelves
- The casters 7/8 grip ring stem that allows easy installation & removal
- Premium non-marking polyurethane wheels provide excellent protection to floors like hardwood & tile
- The wheel's smooth crowned tread will not snag on carpet & allows the casters to effectively pivot
- 300 lbs. of capacity per caster
- See more on Amazon...
Brand: Mapp Caster
Weight: 11.00 Pounds
See On Amazon #7
Mapp Caster Heavy Duty Car Dolly Replacement Casters Set of 4-2500 Lbs. Capacity
Asin: B07QHSFFTQ | Model: A-M350005-4 | PartNumber: A-M350005-4
Fits Merrick Machine Auto Dolly And Any Other Car Dolly With Holes For A 1/2" Threaded Stem.
1/2" Diameter Stem By 13/16" Long - Comes With Lock Washer And Nut.
3-1/4" Mounting Height (2-1/2" Wheel Diameter).
Ball Bearings In Wheels Make It Easier To Get Moving And Keep It Moving.
Features
- Heavy Duty 2,500 pounds capacity (625 pounds per casters)
- Ball bearings in wheels make it easier to get moving and keep it moving
- Fits Merrick Machine Auto Dolly and any other car dolly with holes for a 1/2 threaded stem
- 3-1/4 Mounting Height (2-1/2 Wheel Diameter)
- 1/2 diameter stem by 13/16 long - Comes with lock washer and nut
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 7.00 Pounds
See On Amazon #8
Magliner Frame - No. 2 Frame, Straight Lattice Back, 300002
Asin: B00MV9QW82
Pre-Drilled Holes For Magliner Accessories.
Usa Made.
All Aluminum Lightweight Frame.
Vertical Strap For Reinforcement & Small Item Help.
Features
- 500 lbs Capacity
- Vertical Strap for Reinforcement & Small Item Help
- Pre-drilled holes for magliner accessories
- All Aluminum Lightweight Frame
- USA Made
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #9
3 Replacement Heavy Duty Casters with Easy Rolling Ball Bearings for GoJak Models 4107, 4500, 4520 Set of 4
Asin: B09414M623
3 Inch Diameter Hard Rubber Wheels Are Equipped With Ball Bearings To Allow For Easy Rolling.
Includes 4 Nuts & 4 Lock Washers To Fasten The Casters To Frame Of The Dolly.
The Wheel’S Crowned Tread Allows The Casters To Easily Pivot & Assist With Moving Your Vehicle.
½ Inch Diameter Stem By 1 Inch Long Stem Bolts Right Up To The Frame Of The Dolly.
Features
- These casters fit on GoJak models 4107,4500, 4520
- inch diameter stem by 1 inch long stem bolts right up to the frame of the dolly
- 3 Inch Diameter Hard Rubber wheels are equipped with ball bearings to allow for easy rolling
- The wheel s Crowned Tread allows the casters to easily pivot & assist with moving your vehicle
- Includes 4 nuts & 4 lock washers to fasten the casters to frame of the dolly
- See more on Amazon...
Brand: Mapp Caster
Weight: 6.00 pounds
See On Amazon #10
Mapp Caster Drywall Dolly Replacement Rubber Wheel Casters - 2,400 Lbs Capacity
Asin: B07KRNGR3H
Wheel That Rolls Smoothly And Quietly.
Mounting Plate Size 4" X 4-1/2" With A Bolt Hole Pattern Of 2-5/8" X 3-5/8" Slotted To 3" X 3".
600 Lbs Capacity Each / 2,400 Lbs For All Four.
The Casters Have 8 Inch By 2 Inch Wheels And Have A Mounting Height Of 9-1/2 Inches.
Features
- Replacement caster for most styles of drywall and sheetrock dollies
- The casters have 8 inch by 2 inch wheels and have a mounting height of 9-1/2 inches
- Wheel that rolls smoothly and quietly
- 600 Lbs Capacity each / 2,400 Lbs for all four
- Mounting Plate size 4 x 4-1/2 with a bolt hole pattern of 2-5/8 x 3-5/8 slotted to 3 x 3
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #11
Mapp Caster Q524001HEAT, 4" x 1-1/4" Hi-Temp Heateater Swivel Caster - 300 lbs Capacity
Asin: B00I2Y3SEQ
Temperature Range: -40° F To 475° F Continuous; 550° F Intermittent.
Swivel Radius: 3-15/16".
Bearing Type: Plain (None).
Bolt Hole Spacing: 1-3/4" X 2-7/8" To 3".
Features
- Overall Height 5-1/8"
- Bolt Hole Spacing: 1-3/4 x 2-7/8 to 3
- Temperature range: -40 F to 475 F Continuous; 550 F Intermittent
- Bearing Type: Plain (None)
- Swivel Radius: 3-15/16
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster.com
Dimensions: 4.00 x 4.00 x 1.25 inches
See On Amazon #12
Drywall & Sheetrock Dolly Wheels with Axles Set of 4 - USA Made
Asin: B07KMM5NZZ
Non-Marking Floor Safe Wheel That Rolls Smoothly And Quietly - 600 Lbs Capacity Each / 2,400 Lbs For All Four.
2-1/2" Hub Length (How Wide The Wheel Is At Its Widest Point).
Comes With 1/2" Zerk Axle That Is 3-3/8" Long And Includes Matching Lock Nut.
The Wheel Is Usa Made And Measures 8" In Diameter And Has A 2" Tread Width.
Features
- Replacement wheel for most styles of drywall and sheetrock dollies
- The wheel is USA made and measures 8 in diameter and has a 2 tread width
- Non-Marking floor safe wheel that rolls smoothly and quietly - 600 Lbs Capacity each / 2,400 Lbs for all four
- Comes with 1/2 zerk axle that is 3-3/8 long and includes matching lock nut
- 2-1/2 Hub Length (how wide the wheel is at its widest point)
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #13
Sliding Barn Door Cast Iron Wheel Kit 8" X 2" with 1/2" Smooth & Quiet Ball Bearings
Asin: B00X6D80LY
Comes With 3-1/2" Axle & Nut.
Wheel Is Made Of Cast Iron For Long Lasting Life.
Works On 3/16 Flat Or Less & Also On Angle Iron.
Wheel Comes With Maintenance Free Ball Bearings For Smooth Rolling.
Features
- Great for interior barn doors - Over sized Heavy Duty Wheel
- Wheel comes with maintenance free ball bearings for smooth rolling
- Comes with 3-1/2 Axle & Nut
- Works on 3/16 flat or less & also on angle iron
- Wheel is made of cast iron for long lasting life
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #14
Mapp Caster 5 Inch Shopping Cart Replacement Casters - Set of 2 with Nuts
Asin: B07NSCYXPK
250 Pounds Of Capacity Per Caster.
Attaching Stem Is 1/2" Diameter By 1" Long With Keylock At The Base.
Comes With Lock Nuts To Attach The Caster To The Shopping Cart.
The Polyurethane Wheels Are Safe For All Floors, Non-Marking, Quiet And Easy To Roll.
Features
- 5 inch Replacement Shopping Cart Casters that Fits Most Shopping Carts
- The Polyurethane Wheels are Safe for All Floors, Non-Marking, Quiet and Easy to Roll
- 250 Pounds of Capacity Per Caster
- Comes with Lock Nuts to Attach the Caster to the Shopping Cart
- Attaching Stem is 1/2 diameter by 1 long with Keylock at the Base
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 8.00 Pounds
See On Amazon #15
Tri Wheel Cup Dolly with 3" Hard Rubber Wheels - 840 lbs Capcity - Made in USA
Asin: B00IOU3SL6 | Model: CECOMINOD074321 | PartNumber: CECOMINOD074321
800 Pound Capacity. A Combination Of Four Of These Tri-Wheel Dollies Can Give You A Capacity Up To 3,360 Lbs When The Weight Is Distributed Evenly.
Height From Ground To Top Of The Dolly Is 4-1/2". Height From Ground To (Lowest Point) Bottom Of The Recessis 3-1/8".
Listing Is For Single Dolly. If Four Dollies Are Required, The Quanity Should Be Changed To Four When Adding To Your Shopping Cart..
Overall Size Is 9-1/2" X 9-1/2" X 9-1/2" Triangle. Recessed Triangle Measurement Is 4-1/2 X 4-1/2" X 4-1/2" And Is 1" Deep..
Designed For Heavy Duty Commercial Use. The Frame Is Made From Heavy Duty Cast Iron For Long Lasting Durability - Made In Usa.
Features
- Easy solution to moving equipment, machinery, or other material quickly, easily, and safely
- Designed for heavy duty commercial use. The frame is made from heavy duty cast iron for long lasting durability - Made in USA
- 800 pound capacity. A combination of four of these tri-wheel dollies can give you a capacity up to 3,360 lbs when the weight is distributed evenly
- Overall Size is 9-1/2 x 9-1/2 x 9-1/2 Triangle. Recessed Triangle Measurement is 4-1/2 x 4-1/2 x 4-1/2 and is 1 deep.
- Height from ground to top of the dolly is 4-1/2. Height from ground to (lowest point) bottom of the recessis 3-1/8
- Listing is for single dolly. If four dollies are required, the quanity should be changed to four when adding to your shopping cart.
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Dimensions: 4.25 x 9.50 x 9.50 inches | Weight: 12.00 Pounds
See On Amazon #16
1-1/2" X 5/8" Replacement Jack Caster Kit for Big Red & Torin 3 Ton Low Profile Jacks
Asin: B08KRT4MP3
Metal Crowned Tread On Each Wheel Allows For Easier Swiveling..
5/16"X11/16" Threaded Stem..
Typically Used On Big Red And Torin 3 Ton Low Profile Jacks..
Features
- Contains two swivel casters with 1-1/2" x 5/8" steel wheels and all necessary hardware to mount replacement jack casters.
- Typically used on Big Red and Torin 3 Ton low profile Jacks.
- Metal crowned tread on each wheel allows for easier swiveling.
- 5/16x11/16 threaded stem.
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 4.00 Pounds
See On Amazon #17
6" Stryker Bed & Stretcher Wheel for 3002 Secure II Med-Surg Bed, 3000 Secure Bed, LD04 Birthing Bed, FL17E GoBed, 5050 Stretcher, 816 & 717 Prime Big Wheel Stretcher & More
Asin: B09KVH59SK
Non-Marking Poly Tread Provides Excellent Floor Protection While Giving A Smooth & Quiet Ride.
6” Diameter, 2” Wide Tread, 2-1/2” Hub Length, 7/16” Inside Diameter (Accepts A 7/16” Axle).
Each Wheel Is Equipped With Two Precision Ball Bearings To Provide Excellent Mobility.
Fits On Stryker’S 5050 Stretcher, 816 & 717 Prime Big Wheel Stretchers & More.
Features
- Fits on Stryker s 3002 Secure II Med-Surg Bed, 3000 Secure Bed, LD04 Birthing Bed, FL17E GoBed
- Fits on Stryker s 5050 Stretcher, 816 & 717 Prime BIG Wheel Stretchers & more
- Non-marking poly tread provides excellent floor protection while giving a smooth & quiet ride
- Each wheel is equipped with two precision ball bearings to provide excellent mobility
- 6 Diameter, 2 wide Tread, 2-1/2 hub length, 7/16 Inside diameter (accepts a 7/16 axle)
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 2.25 pounds
See On Amazon #18
Mapp Caster LSS414, 4" x 1-1/4" Steel Wheel with 1/2" Plain Bore
Asin: B00J4YJMFW
4" Diameter By 1-1/4" Width.
Can Be Used As A Replacement Wheel.
1/2" Plain Bore.
Features
- 300 lbs Capacity
- 1/2 Plain Bore
- 4 Diameter by 1-1/4 Width
- Can be used as a replacement wheel
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster.com
Dimensions: 4.00 x 4.00 x 1.25 inches
See On Amazon #19
Drywall & Sheetrock Dolly Rubber Wheels with Axles Set of 4
Asin: B07KRQ5GTG
Rolls Smoothly And Quietly - 600 Lbs Capacity Each / 2,400 Lbs For All Four.
2-1/2" Hub Length (How Wide The Wheel Is At Its Widest Point).
Comes With 1/2" Zerk Axle That Is 3-3/8" Long And Includes Matching Lock Nut.
The Wheels Measures 8" In Diameter And Has A 2" Tread Width.
Features
- Replacement wheel for most styles of drywall and sheetrock dollies
- The wheels measures 8 in diameter and has a 2 tread width
- Rolls smoothly and quietly - 600 Lbs Capacity each / 2,400 Lbs for all four
- Comes with 1/2 zerk axle that is 3-3/8 long and includes matching lock nut
- 2-1/2 Hub Length (how wide the wheel is at its widest point)
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #20
Jack Caster, 2-1/2" x 1-1/4" Steel Wheel Jack Caster - 250 lbs Capacity
Asin: B0195UH6K2
250 Lbs Capcaity.
Wheel Type: Cast Iron.
Threaded Stem: 3/4" - 10 X1".
Features
- Mounting Height of 3-1/2"
- Threaded Stem: 3/4 - 10 x1
- 250 lbs Capcaity
- Wheel Type: Cast Iron
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster.com
Dimensions: 3.50 x 2.50 x 2.50 inches
See On Amazon #21
Stryker Stretcher 6" x 2" Replacement Wheels - Set of 2 - Mapp Caster
Asin: B082P7GM38
The Inside Diameter Of These Wheels Is 7/16 Of An Inch With A Hub Length Of 2-1/2 Inches.
Chemical, Impact & Great Wear Resistant With Sealed Ball Bearings Makes It A Premium Caster Wheel.
Thermoplastic Rubber Tread Protects Floors, Reject Debris & Conquer All Types Of Terrain (550 Lbs. Capacity).
This Wheel Is Designed To Fit On Stryker Stretcher Caster Rigs & Mapp Caster's Replacement Rigs.
Features
- Fits on Stryker Stretchers 6060, 6070, 6080, 6082, 6083, 6086, 6090 6500, 6506, 6516 & much more
- This wheel is designed to fit on Stryker stretcher caster rigs & Mapp Caster's replacement rigs
- The inside diameter of these wheels is 7/16 of an inch with a hub length of 2-1/2 inches
- Thermoplastic rubber tread protects floors, reject debris & conquer all types of terrain (550 lbs. capacity)
- Chemical, impact & great wear resistant with sealed ball bearings makes it a premium caster wheel
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Dimensions: 6.00 x 6.00 x 2.00 inches
See On Amazon #22
Engine Stand Caster - 3-1/2" Steel Wheel Caster - 300 Lbs Capacity
Asin: B0186EFEI4
Bolt Hole Pattern: 1-1/4" X 3".
301 Pound Capacity.
Overall Heigth: 4-5/8".
Make Sure Bolt Hole Pattern And Overall Height Match Current Caster.
Features
- Rreplacement caster for most engine stands
- Make sure bolt hole pattern and overall height match current caster
- Bolt Hole Pattern: 1-1/4 x 3
- Overall Heigth: 4-5/8
- 301 Pound Capacity
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #23
Mapp Caster Bulk Shopping Cart Replacement Wheels with Axles - 50 Wheel Kit
Asin: B07FSXSNHL
Non-Marking Floor Safe Wheel That Rolls Smoothly And Quietly - 250 Lbs Capacity (Each).
1-9/16" Hub Length (How Wide The Wheel Is At Its Widest Point).
Comes With 5/16" Bolt That Is 2-1/4" Long And Includes Matching Lock Nut.
The Wheel Measures 5" In Diameter And Has A 1-1/4" Tread Width.
Features
- Replacement wheel for most styles of shopping carts
- The wheel measures 5 in diameter and has a 1-1/4 tread width
- Non-Marking floor safe wheel that rolls smoothly and quietly - 250 Lbs Capacity (each)
- Comes with 5/16 Bolt that is 2-1/4 long and includes matching lock nut
- 1-9/16 Hub Length (how wide the wheel is at its widest point)
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #24
Stryker Stretchers 6" x 2" Replacement Wheel - Mapp Caster
Asin: B082854JV4
The Inside Diameter Of The Wheel Is 7/16 Of An Inch With A Hub Length Of 2-1/2 Inches.
Chemical, Impact & Great Wear Resistant With Sealed Ball Bearings Makes It A Premium Caster Wheel.
Thermoplastic Rubber Tread Protects Floors, Reject Debris & Conquer All Types Of Terrain (550 Lbs. Capacity).
This Wheel Is Designed To Fit On Stryker Stretcher Caster Rigs & Mapp Caster's Replacement Rigs.
Features
- Fits on Stryker Stretchers 6060, 6070, 6080, 6082, 6083, 6086, 6090 6500, 6506, 6516 & much more
- This wheel is designed to fit on Stryker stretcher caster rigs & Mapp Caster's replacement rigs
- The inside diameter of the wheel is 7/16 of an inch with a hub length of 2-1/2 inches
- Thermoplastic rubber tread protects floors, reject debris & conquer all types of terrain (550 lbs. capacity)
- Chemical, impact & great wear resistant with sealed ball bearings makes it a premium caster wheel
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Dimensions: 6.00 x 6.00 x 2.00 inches
See On Amazon #25
Powered Sliding Gate V Groove Wheel 6" x 1-3/4" - 5000 lbs Capacity -Mapp Caster
Asin: B00GFZSNLM
Maintenance Free And Deisgned For Continuous Cycle Operation - 5,000 Pounds Capacity.
7/8" V-Groove Width, 7/16" Depth - Work Best With 1" Or Large Angle Iron (V-Track).
Can Be Used With 1/2" Or 5/8" Bolt - Hub Length (Where Bolt Goes Through) Is 2" Wide.
Popular Replacement For Liftmaster Ah110 & Ht5000, Platinum Access Vgw-5000, And Doorking 1201-000.
Features
- Designed for automatic or powered sliding gates that run on a v-track (angle iron)
- Popular replacement for Liftmaster AH110 & HT5000, Platinum Access VGW-5000, and DoorKing 1201-000
- Maintenance free and deisgned for continuous cycle operation - 5,000 pounds capacity
- Can be used with 1/2 or 5/8 Bolt - Hub length (where bolt goes through) is 2 wide
- 7/8 V-groove width, 7/16 depth - Work best with 1 or large angle iron (v-track)
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster.com
Dimensions: 6.00 x 6.00 x 1.75 inches
See On Amazon #26
Jack Caster - 3-1/2" Steel Wheel Caster - 300 Lbs Capacity
Asin: B0186EFDLM
Bolt Hole Pattern: 1-1/4" X 3".
300 Pound Capacity.
Overall Heigth: 4-5/8".
Make Sure Bolt Hole Pattern And Overall Height Match Current Caster.
Features
- Replacement caster for jacks that use a top plate to attach
- Make sure bolt hole pattern and overall height match current caster
- Bolt Hole Pattern: 1-1/4 x 3
- Overall Heigth: 4-5/8
- 300 Pound Capacity
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
See On Amazon #27
3 Inch Heavy Duty Workbench Casters, Fits on Husky Workbenches (4 Swivel Brake Casters)
Asin: B0CRGHRLP3
Great For Garages, Resists & Holds Up Well To Water, Chemicals, Solvents, Oils & Cleaning Solutions.
Raises The Table By 4 Inches, 3 Inch Heavy Duty Plastic Wheels.
300 Lbs Per Caster, 1200 Lbs Of Capacity If Weight Is Evenly Distributed.
To Install, Just Take Off The Feet/Glides & Screw In The Threaded Stem Casters In Their Spot..
Features
- Fits on Workbench models 20T002-1B, 20T002-1W, G7200S-US & MORE, Check description for full list
- To install, just take off the feet/glides & screw in the threaded stem casters in their spot.
- Great for garages, resists & holds up well to water, chemicals, solvents, oils & cleaning solutions
- 300 lbs per caster, 1200 lbs of capacity if weight is evenly distributed
- Raises the table by 4 inches, 3 inch Heavy Duty Plastic Wheels
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 6.00 pounds
See On Amazon #28
Mapp Caster Drywall Dolly Replacement TPR Wheel Casters - 2,400 Lbs Capacity
Asin: B07KRQ9XQK
Non-Marking Floor Safe Wheel That Rolls Smoothly And Quietly.
Mounting Plate Size 4" X 4-1/2" With A Bolt Hole Pattern Of 2-5/8" X 3-5/8" Slotted To 3" X 3".
600 Lbs Capacity Each / 2,400 Lbs For All Four.
The Casters Have 8 Inch By 2 Inch Wheels And Have A Mounting Height Of 9-1/2 Inches.
Features
- Replacement caster for most styles of drywall and sheetrock dollies
- The casters have 8 inch by 2 inch wheels and have a mounting height of 9-1/2 inches
- Non-Marking floor safe wheel that rolls smoothly and quietly
- 600 Lbs Capacity each / 2,400 Lbs for all four
- Mounting Plate size 4 x 4-1/2 with a bolt hole pattern of 2-5/8 x 3-5/8 slotted to 3 x 3
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Weight: 6.25 Pounds
See On Amazon #29
Stryker Stretcher 6" x 2" Replacement Caster with Brake - Mapp Caster
Asin: B08285K38R
The Thermoplastic Rubber Tread Protects Floors, Reject Debris & Conquer All Types Of Terrain.
550 Lbs. Capacity With An Easy To Use Brake That Can Be Switched On And Off In Moments Notice.
Chemical, Impact & Great Wear Resistant With Sealed Ball Bearings Makes It A Premium Caster Wheel.
The Inside Diameter Of The Hollow Swiveling Section (Mounting Area) Is 20Mm Or .7874 Inches.
Features
- Fits on Stryker Stretchers 6060, 6070, 6080, 6082, 6083, 6086, 6090 6500, 6506, 6516 & much more
- The inside diameter of the hollow swiveling section (mounting area) is 20mm or .7874 inches
- The thermoplastic rubber tread protects floors, reject debris & conquer all types of terrain
- Chemical, impact & great wear resistant with sealed ball bearings makes it a premium caster wheel
- 550 lbs. capacity with an easy to use brake that can be switched on and off in moments notice
- See more on Amazon...
Brand: Mapp Caster | Manufacturer: Mapp Caster
Dimensions: 7.50 x 8.00 x 3.00 inches
See On Amazon #30
4 Replacement Heavy Duty Casters with Easy Rolling Ball Bearings for GoJak Models 4107, 4500, 4520 Set of 4
Asin: B09417PVK7
4 Inch Diameter Hard Rubber Wheels Are Equipped With Ball Bearings To Allow For Easy Rolling.
Includes 4 Nuts & 4 Lock Washers To Fasten The Casters To Frame Of The Dolly.
The Wheel’S Crowned Tread Allows The Casters To Easily Pivot & Assist With Moving Your Vehicle.
½ Inch Diameter Stem By 1 Inch Long Stem Bolts Right Up To The Frame Of The Dolly.
Features
- These heavy duty kitchen casters fit inside the 1- tubing of a food prep table
- inch diameter stem by 1 inch long stem bolts right up to the frame of the dolly
- 4 Inch Diameter Hard Rubber wheels are equipped with ball bearings to allow for easy rolling
- The wheel s Crowned Tread allows the casters to easily pivot & assist with moving your vehicle
- Includes 4 nuts & 4 lock washers to fasten the casters to frame of the dolly
- See more on Amazon...
Brand: Mapp Caster
Weight: 7.00 Pounds
See On Amazon