Metalcloak - Buying Guide
Last Updated: 05/03/2024
Share on
Bestselling from Metalcloak on Amazon
- DuroSpring Replacement Bump Stops By Metalcloak, Full Set, Compatible with Jeep JK/JL Wrangler, Mini...
- Upper Rear DuroSpring Replacement Bump Stops By Metalcloak, Compatible with JK/JL, Minimize Harsh Bo...
- Metalcloak Molded LED Replacement Tail Light Kit, Compatible with Jeep CJ, YJ, TJ, LJ, Best LED Syst...
- Rocksport RED Steering Stabilizer Kit by MetalCloak, For JK Wrangler, Provides Additional Valving, I...
- Rear Coil Spring Alignment Correction/Retainer By Metalcloak, Fits JK Wrangler, Fine Tune Your Ride,...
- Metalcloak Front Coil Correction Pads, Compatible with JL Wrangler | JT Gladiator, Provides Correcti...
- Sway Bar Quick Disconnect By Metalcloak, 12.25", Compatible with JK Wrangler (2007-2018), Gold Zinc ...
- Universal Adjustable Bump-Stop System (1 -2 ) By Metalcloak, Maximize Your Suspension Travel, Adjust...
- MetalCloak Rear Sway Bar Reinforcement & Repair Bracket, Compatible with JT Gladiator, Signature Gol...
- Spare Tire License Plate Relocation Bracket, JK Wrangler, TJ/LJ Wrangler, Sturdy Mount, Made Strong,...
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
DuroSpring Replacement Bump Stops By Metalcloak, Full Set, Compatible with Jeep JK/JL Wrangler, Minimize Harsh Bottoming Out of Your Jeep Suspension, Increased Comfort and Control, Easy to Install
Asin: B08CJM9FCF | Ean: 0860004200659 | UPC: 860004200659
Easy To Install.
Superior Performance Over Factory Bump Stops.
Microcellular Properties Add Dampening.
Features
- No Maintenance
- Microcellular Properties Add Dampening
- Easy to Install
- Superior Performance Over Factory Bump Stops
- See more on Amazon...
Brand: Metalcloak
Dimensions: 5.00 x 2.00 x 2.00 Inches
See On Amazon #2
Upper Rear DuroSpring Replacement Bump Stops By Metalcloak, Compatible with JK/JL, Minimize Harsh Bottoming Out of Your JK/JL Wrangler Suspension, Increased Comfort and Control
Asin: B091G4Y49Y | Ean: 0850028646151 | UPC: 850028646151
Increased Comfort And Control - Simply Install Metalcloak Durosprings Into The Factory Jounce Locations And Enjoy The Extra Confidence, Comfort, And Control..
Easy To Install - Can Be Installed In Minutes Making For A Quick And Easy Install..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
No Maintenance - Durosprings Require No Maintenance, Zero Mechanical Sliding Parts To Bind And Seize, No Fluids To Change Or Gases To Charge..
Microcellular Properties Add Dampening - Metalcloak's Microcellular Urethane Bumps Add Cushioning, Control, And Additional Spring Rate With A Soft Mechanical Stopping Point For The Compression Of Your Suspension. Smooth Out Your Ride With Metalcloak Durospring Replacement Bump Stops..
Features
- SUPERIOR PERFORMANCE OVER FACTORY BUMP STOPS - DuroSprings offer silent and supple control, absorbing compression energy and slowly releasing it with a dampened return providing increased stability and comfort, all while reducing stresses that occur when pushing your vehicles components to the limits.
- MICROCELLULAR PROPERTIES ADD DAMPENING - MetalCloak's Microcellular Urethane bumps add cushioning, control, and additional spring rate with a soft mechanical stopping point for the compression of your suspension. Smooth out your ride with MetalCloak DuroSpring Replacement Bump Stops.
- INCREASED COMFORT AND CONTROL - Simply install MetalCloak DuroSprings into the factory jounce locations and enjoy the extra confidence, comfort, and control.
- NO MAINTENANCE - DuroSprings require NO maintenance, zero mechanical sliding parts to bind and seize, no fluids to change or gases to charge.
- EASY TO INSTALL - Can be installed in minutes making for a quick and easy install.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #3
Metalcloak Molded LED Replacement Tail Light Kit, Compatible with Jeep CJ, YJ, TJ, LJ, Best LED System for Your Vehicle, Truly Custom Upgrade, Molded ASA Led Housing, and Easy to Install
Asin: B0BCSY1HGS | Ean: 0850028646526 | UPC: 850028646526
Hi-Visibility/Lo-Profile Led Tail Light Replacements - The Housing Incorporates A Low Profile Led Replacement Tail Lights For A Truly Custom Upgrade. The Hi Visibility Led Lights Are Much Brighter Than The Dim Factory Tail Lights And Are Sae/Dot Compliant That Wire Directly Into Place..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Requirements - The Rear Led Light Kit Requires A Flasher To Return Your Signal Lights To A Regular Rhythm. Tj Wrangler (’97-’00): Ep-26 Flasher, Tj/Lj Wrangler (’01-’06): Metalcloak Flasher Relay #2201, And Yj Wrangler (’76-’95): El-12 Flasher..
Molded Asa Led Housings - The Rear Led Light Kit Housing Is Made Of Black Asa (Acrylonitrile Styrene Acrylate), Can Be Used With Or Without Corner Guards, And Bolts Directly Into The Stock Locations Requiring No Body Modifications..
Features
- BEST LED SYSTEM FOR YOUR JEEP - The MetalCloak Rear LED Light Kit is the BEST LED system for the Jeep TJ/LJ or YJ Wranglers. The LED light kit works as a replacement for the stock tail lights.
- MOLDED ASA LED HOUSINGS - The rear LED light kit housing is made of black ASA (acrylonitrile styrene acrylate), can be used with or without corner guards, and bolts directly into the stock locations requiring no body modifications.
- HI-VISIBILITY/LO-PROFILE LED TAIL LIGHT REPLACEMENTS - The housing incorporates a low profile led replacement tail lights for a truly custom upgrade. The hi visibility led lights are much brighter than the dim factory tail lights and are SAE/DOT compliant that wire directly into place.
- REQUIREMENTS - The rear led light kit requires a flasher to return your signal lights to a regular rhythm. TJ Wrangler ( 97- 00): EP-26 Flasher, TJ/LJ Wrangler ( 01- 06): MetalCloak Flasher Relay #2201, and YJ Wrangler ( 76- 95): EL-12 Flasher.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
Weight: 10.00 pounds
See On Amazon #4
Rocksport RED Steering Stabilizer Kit by MetalCloak, For JK Wrangler, Provides Additional Valving, Improved Performance, Steering Dampener, Easy Installation, Made in the USA
Asin: B01LZM5C9Y | Ean: 0860004200635 | UPC: 860004200635
Improved Performance: The Rocksport Red Steering Stabilizer/Damper Has Increased Compression And Extension Damping Performance Over The Original Equipment. This Improved Performance Will Assist In The Overall Ride And Control Of Your Jk..
Easy Install: This System Is Simple To Install And Uses The Existing Factory Holes For A Bolt-On Application..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Steering Stabilizer Axle Side Mount: The Metalcloak Steering Stabilizer, Axle Side Mount Relocates The Axle Side Of The Steering Stabilizer To Better Protect The Steering Stabilizer From Debris By Moving The Stabilizer Up And Out Of Harms Way From Where The Factory Steering Stabilizer Is Mounted..
Perfect Placement: This System Contains The Metalcloak Steering Stabilizer Axle Side Relocation Mount That Places The Steering Stabilizer Up And Out Of Harms Way And A Specifically Valved Rocksport Red Steering Dampener..
Features
- ADDITIONAL VALVING: MetalCloak's RockSport RED Steering Stabilizer Kit for the JK Wrangler provides the needed additional valving for your lifted JK with easy to install relocation brackets.
- PERFECT PLACEMENT: This system contains the MetalCloak Steering Stabilizer Axle Side Relocation Mount that places the steering stabilizer up and out of harms way and a specifically valved RockSport RED steering Dampener.
- IMPROVED PERFORMANCE: The RockSport RED steering stabilizer/damper has increased compression and extension damping performance over the original equipment. This improved performance will assist in the overall ride and control of your JK.
- STEERING STABILIZER AXLE SIDE MOUNT: The MetalCloak Steering Stabilizer, Axle Side Mount relocates the axle side of the steering stabilizer to better protect the steering stabilizer from debris by moving the stabilizer up and out of harms way from where the factory steering stabilizer is mounted.
- EASY INSTALL: This system is simple to install and uses the existing factory holes for a bolt-on application.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #5
Rear Coil Spring Alignment Correction/Retainer By Metalcloak, Fits JK Wrangler, Fine Tune Your Ride, Adjust Corner Height, Level Out The Lean, Ensures a Perfect Ride, Made in USA
Asin: B08WFSLB5X | Ean: 0850028646069 | UPC: 850028646069
Level Out The Lean: When Adding Accessories, It May Affect The Way Your Rig Sits As You Add Weight To One Side Or The Other. Ride Height Spacers Are An Affordable And Easy Way To Adjust Ride Height To Level Out Your Jk..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Fine Tune Your Jk: Coil Spring Spacers Are Shims That Will Help You Fine Tune The Corner Height Of Your Jk Wrangler, Specific For Your Jk Build..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Durable Design: Rear Coil Spring Spacers Made Of 1/8" Steel Plate And Rear Coil Spring Retainers Made Of 1/4" Thick Steel. There Is A Gold Zinc Plated Finish On Each..
Perfect Your Ride Height: The Retainer Solution Attaches The Rear Coils To The Spring Perches To Ensure That Your Coil Spring Stays Seated In The Coil Bucket When At The Extremes Of Articulation And Prevents Rattling In The Coil Bucket..
Features
- IMPROVED CONFIDENCE IN YOUR COIL: Adjusts corner height and assures the rear coils stay in place.
- PERFECT YOUR RIDE HEIGHT: The Retainer solution attaches the rear coils to the spring perches to ensure that your coil spring stays seated in the coil bucket when at the extremes of articulation and prevents rattling in the coil bucket.
- LEVEL OUT THE LEAN: When adding accessories, it may affect the way your Rig sits as you add weight to one side or the other. Ride height spacers are an affordable and easy way to adjust ride height to level out your JK.
- DURABLE DESIGN: Rear Coil Spring Spacers made of 1/8 Steel Plate and Rear Coil Spring Retainers made of 1/4 Thick Steel. There is a Gold Zinc Plated Finish on each.
- FINE TUNE YOUR JK: Coil Spring Spacers are shims that will help you fine tune the corner height of your JK Wrangler, specific for your JK build.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #6
Metalcloak Front Coil Correction Pads, Compatible with JL Wrangler | JT Gladiator, Provides Correction, Fine Tunes, Easy Install
Asin: B08BQLDFD1 | Ean: 0860004200673 | UPC: 860004200673
Fine Tune Your Jl/Jt - Fits In Factory Location And Is A Quick Upgrade To Fine Tune Your Jk/Jl..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Easy Install - Metcloak’S Coil Correction Pads Can Be Installed Quite Easily Without Taking Up Much Time, Which Is A Perfect Complement To Their Quality..
Provides Correction - This Polymer Isolator Replaces The Oem Plastic Part And Corrects The Coil Bow That May Be Caused When Using The Worn Parts..
Features
- PERFECT REPLACEMENT - Replace the plastic OE factory coil isolator pads that are problematic and cause coil bow with MetalCloak's Coil Isolator Correction Pads.
- PROVIDES CORRECTION - This polymer isolator replaces the OEM plastic part and corrects the coil bow that may be caused when using the worn parts.
- FINE TUNE YOUR JL/JT - Fits in factory location and is a quick upgrade to fine tune your JK/JL.
- EASY INSTALL - Metcloak s Coil Correction Pads can be installed quite easily without taking up much time, which is a perfect complement to their quality.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #7
Sway Bar Quick Disconnect By Metalcloak, 12.25", Compatible with JK Wrangler (2007-2018), Gold Zinc Chromate, Made Durable, Maximum Articulation, Easy Install
Asin: B08W9725C8 | Ean: 0850021477912 | UPC: 850021477912
Made To Be Durable: Sway Bar Quick Disconnects Are Made Of 1/2" Steel And Steel Coated With A Gold Zinc Shine..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Easy Install: Metalcloak Quick Disconnects Are Easy To Disconnect And Then Re-Connect; Unique To The Metalcloak System, Is An Extension Bracket That Allows Easier Access For Reaching The Attachment Point..
Achieve Maximum Articulation: Disconnecting The Sway Bar While Off-Road Allows Your Wrangler To Achieve The Maximum Articulation That Your Suspension Has Been Designed For..
Features
- SPECIFIC DESIGN/SIZE: Metalcloak JK Wrangler Sway Bar Quick Disconnect bolts in place with no cutting or modification required. They are designed for the Electronic Sway Bar, Metalcloak s 3.5 lift, as well as the JK Wrangler (2007-2018).
- ACHIEVE MAXIMUM ARTICULATION: Disconnecting the sway bar while off-road allows your Wrangler to achieve the maximum articulation that your suspension has been designed for.
- MADE TO BE DURABLE: Sway Bar Quick Disconnects are made of 1/2 steel and steel coated with a gold zinc shine.
- EASY INSTALL: MetalCloak Quick Disconnects are easy to disconnect and then re-connect; unique to the MetalCloak system, is an extension bracket that allows easier access for reaching the attachment point.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #8
Universal Adjustable Bump-Stop System (1 -2 ) By Metalcloak, Maximize Your Suspension Travel, Adjustable to Eliminate Interference from Tire/Body, and Gold Zinc Finished Bump Plate
Asin: B08WCG4CZR | Ean: 0850028646007 | UPC: 850028646007
Adjust From 1”-2” Without Removing Coils: Once This System Is Installed The Elastomer Pads Help Cushion Harsh Impacts And May Be Adjusted In Height Without Removing Coils..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Gold Zinc Finish: All Hardware Lengths Are Included To Attach From 1" Through The 2" Range And Come With A Gold Zinc Finished Bump Plate..
Compatible With: 1997 - 2006 Tj Wrangler | 2007 - 2018 Jk Wrangler | 2018 + Jl Wrangler | 2019 + Jt Gladiator.
Features Include: 8 Stackable One Inch Thermoset Elastomer Pads, Black Oxide Bolts In Required Lengths For All Heights, And Gold Zinc Chromate Bump Plate..
Maximize Your Suspension Travel: Not All Tire Size And Lift Heights Are The Same; Easily Add Or Take Away The Stackable Pads To Get The Perfect Amount Of Bump-Stop You Need. Maximize Your Suspension Travel And Set A Compliant Limit That Keep Tires From Hitting Vital Components..
Features
- ADJUSTABLE BUMP STOP SYSTEM: MetalCloak's Adjustable Bump-Stop System is designed so you can set the exact amount of bump stop for the tire size and lift height combination on your ride. Fits JK/JL/JT Wrangler Front or TJ/LJ Front or Rear applications.
- MAXIMIZE YOUR SUSPENSION TRAVEL: Not all tire size and lift heights are the same; easily add or take away the stackable pads to get the perfect amount of bump-stop you need. Maximize your suspension travel and set a compliant limit that keep tires from hitting vital components.
- ADJUST FROM 1 -2 WITHOUT REMOVING COILS: Once this system is installed the Elastomer Pads help cushion harsh impacts and may be adjusted in height without removing coils.
- FEATURES INCLUDE: 8 Stackable One Inch Thermoset Elastomer Pads, Black Oxide Bolts in Required Lengths for all Heights, and Gold Zinc Chromate Bump Plate.
- GOLD ZINC FINISH: All hardware lengths are included to attach from 1 through the 2 range and come with a Gold Zinc finished bump plate.
- COMPATIBLE WITH: 1997 - 2006 TJ Wrangler | 2007 - 2018 JK Wrangler | 2018 + JL Wrangler | 2019 + JT Gladiator
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #9
MetalCloak Rear Sway Bar Reinforcement & Repair Bracket, Compatible with JT Gladiator, Signature Gold Zinc Finish, Easy Installation, and Made in The USA
Asin: B0BLY3XQVK | Ean: 0850028646847 | UPC: 850028646847
Features Include: Two 1/4” Steel Laser Cut Brackets, Mounting Hardware, Signature Gold Zinc, And All Required Hardware..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Signature Gold Zinc Finish: The Gladiator Rear Sway Bar Reinforcement Bracket Is Made Of 1/4" Hot Rolled Steel And Is Finished In Gold Zinc. This Adds Additional Strength To An Area That Can Fatigue And Fail When Out On The Trail; Get It Reinforced Before It Breaks. Installs With The Included Hardware And Is A Quality Metalcloak Part Made In The Usa..
Features
- SECURE MOUNTING POINT: JT Gladiator Rear Sway Bar Reinforcement Bracket provides a secure mounting point to the OE frame bracket and may also be used to aid in the repair of a damaged factory bracket.
- SIGNATURE GOLD ZINC FINISH: The Gladiator Rear Sway Bar Reinforcement Bracket is made of 1/4 hot rolled steel and is finished in gold zinc. This adds additional strength to an area that can fatigue and fail when out on the trail; get it reinforced before it breaks. Installs with the included hardware and is a quality MetalCloak part made in the USA.
- FEATURES INCLUDE: Two 1/4 steel laser cut brackets, mounting hardware, signature gold zinc, and all required hardware.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #10
Spare Tire License Plate Relocation Bracket, JK Wrangler, TJ/LJ Wrangler, Sturdy Mount, Made Strong, Easy Installation, Easy Removal, Added Safety, Black Powder Coat Finish, Made in The USA
Asin: B0C4FX61W4 | Ean: 0850050509325 | UPC: 850050509325
Easy Removal: The License Place Mount Comes With A Quick Release/Adjustment Thumb Knobs For Easy Removal On The Trail When You Need Quick Access To Your Spare Tire..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Features Include: Fits The Metalcloak Rear Tire Carrier, Made Of 1/8” Hot Rolled Steel, Laser Cut, Third Brake Light, All Required Hardware, Black Powder Coat Finish, Made In The Usa.
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Added Safety: The Kit Includes A Bright Led Light For A 3Rd Rear Brake Light And An Led For Illuminating The License Plate For Added Safety..
Made Strong: The Rear License Plate Relocation Bracket Is Made Of 1/8" Hot Rolled Steel And Mounts To The Spare Tire Mounting Plate On The Metalcloak Rear Tire Carrier Or Any Other Tire Carrier Where You Can Access The Mounting Plate From Both Sides..
Features
- PROVIDES STURDY MOUNT: The MetalCloak's Rear License Plate Relocation Bracket & 3rd Brake Light provides a sturdy mount for your rear license plate with the added benefit of a 3rd brake light for Jeep Wranglers.
- MADE STRONG: The rear license plate relocation bracket is made of 1/8 hot rolled steel and mounts to the spare tire mounting plate on the MetalCloak rear tire carrier or any other tire carrier where you can access the mounting plate from both sides.
- EASY REMOVAL: The license place mount comes with a quick release/adjustment thumb knobs for easy removal on the trail when you need quick access to your spare tire.
- ADDED SAFETY: The kit includes a bright LED light for a 3rd rear brake light and an LED for illuminating the license plate for added safety.
- FEATURES INCLUDE: Fits the MetalCloak Rear Tire Carrier, Made of 1/8 Hot Rolled Steel, Laser Cut, Third Brake Light, All Required Hardware, Black Powder Coat Finish, Made in the USA
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
Weight: 4.00 pounds
See On Amazon #11
Universal Adjustable Bump-Stop System (1 -4 ) By Metalcloak, Maximize Your Suspension Travel, Adjustable to Eliminate Interference from Tire/Body, and Gold Zinc Finished Bump Plate
Asin: B091MNWGYN | Ean: 0850028646236 | UPC: 850028646236
Adjust From 1”-4” Without Removing Coils: Once This System Is Installed The Elastomer Pads Help Cushion Harsh Impacts And May Be Adjusted In Height Without Removing Coils..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Gold Zinc Finish: All Hardware Lengths Are Included To Attach From 1" Through The 4" Range And Come With A Gold Zinc Finished Bump Plate..
Compatible With: 1997 - 2006 Tj Wrangler | 2007 - 2018 Jk Wrangler | 2018 + Jl Wrangler | 2019 + Jt Gladiator.
Features Include: 8 Stackable One Inch Thermoset Elastomer Pads, Black Oxide Bolts In Required Lengths For All Heights, And Gold Zinc Chromate Bump Plate..
Maximize Your Suspension Travel: Not All Tire Size And Lift Heights Are The Same; Easily Add Or Take Away The Stackable Pads To Get The Perfect Amount Of Bump-Stop You Need. Maximize Your Suspension Travel And Set A Compliant Limit That Keep Tires From Hitting Vital Components..
Features
- ADJUSTABLE BUMP STOP SYSTEM: MetalCloak's Adjustable Bump-Stop System is designed so you can set the exact amount of bump stop for the tire size and lift height combination on your Jeep. Fits Jeep JK/JL/JT Wrangler Front or TJ/LJ Front or Rear applications.
- MAXIMIZE YOUR SUSPENSION TRAVEL: Not all tire size and lift heights are the same; easily add or take away the stackable pads to get the perfect amount of bump-stop you need. Maximize your suspension travel and set a compliant limit that keep tires from hitting vital components.
- ADJUST FROM 1 -4 WITHOUT REMOVING COILS: Once this system is installed the Elastomer Pads help cushion harsh impacts and may be adjusted in height without removing coils.
- FEATURES INCLUDE: 8 Stackable One Inch Thermoset Elastomer Pads, Black Oxide Bolts in Required Lengths for all Heights, and Gold Zinc Chromate Bump Plate.
- GOLD ZINC FINISH: All hardware lengths are included to attach from 1 through the 4 range and come with a Gold Zinc finished bump plate.
- COMPATIBLE WITH: 1997 - 2006 TJ Wrangler | 2007 - 2018 JK Wrangler | 2018 + JL Wrangler | 2019 + JT Gladiator
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #12
JL Wrangler Rear Offset Sway Bar Links, 12", Extended Length, No Modifications Required, OE Quality Fit and Finish, Gold Zinc Chromate Finish, Easy Installation, Made in USA
Asin: B0C29GFBV6 | Ean: 0850050509226 | UPC: 850050509226
No Modifications Required: The Sway Bar End Links Bolt Directly Into The Factory Locations, No Cutting Or Modification Is Required, And Are Finished In Metalcloak's Signature Gold Zinc To Help Protect Them Against The Elements And Keep Them Looking Good..
Made In Usa: Not An Imported Product, 100% In-House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Features Include: Extended Length Of 12.25”, Offset End Links To Keep The Bushings Parallel With Housing, Designed For Metalcloak’S 3.5” Lift, Compatible With 3.5” – 6” Lift If Not Paired With Metalcloak Kit, Oe Quality Fit And Finish, Sway Bar Links Finished In Gold Zinc Chromate, All Needed Hardware, Easy Install.
Proper Adjustment: When Lifting A Jeep, The Sway Bar Links Need To Increase In Length To Keep Your Sway Bar Adjusted Properly. Metalcloak's Offset Sway Bar Links Are Extended To 12.25" And Are Designed Offset To Keep The Bushings And Studs Parallel With Their Housing When The Jeep Is Sitting Unflexed. While Designed For Metalcloak’S 3.5” Lift Kit, This Product Works For A 3.5” – 6” Lift, If Not A Metalcloak Kit..
Features
- EXTENDED LENGTH: MetalCloak's Jeep JL Wrangler Extended Rear Offset Sway Bar Links are extended length links required for lifted Jeeps that have extensive rear travel and articulation.
- PROPER ADJUSTMENT: When lifting a Jeep, the sway bar links need to increase in length to keep your sway bar adjusted properly. MetalCloak's Offset Sway Bar Links are extended to 12.25 and are designed offset to keep the bushings and studs parallel with their housing when the Jeep is sitting unflexed. While designed for MetalCloak s 3.5 lift kit, this product works for a 3.5 6 lift, if not a MetalCloak kit.
- NO MODIFICATIONS REQUIRED: The sway bar end links bolt directly into the factory locations, no cutting or modification is required, and are finished in MetalCloak's signature gold zinc to help protect them against the elements and keep them looking good.
- FEATURES INCLUDE: Extended Length of 12.25 , Offset End Links to Keep the Bushings Parallel with Housing, Designed for MetalCloak s 3.5 Lift, Compatible with 3.5 6 Lift if Not Paired with MetalCloak Kit, OE Quality Fit and Finish, Sway Bar Links Finished in Gold Zinc Chromate, All Needed Hardware, Easy Install
- MADE IN USA: Not an imported product, 100% in-house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #13
JK Wrangler Sway Bar Link Extension Kit By Metalcloak, 14.5", Compatible with JK Wrangler (2007-2018), Gold Zinc Chromate, Designed for Electronic Sway bar, Easy Install
Asin: B08S3DSF6F | Ean: 0850021477509 | UPC: 850021477509
Made To Be Durable: Sway Bar End Links Are Made Of 1/2" Steel And Steel Coated With A Gold Zinc Shine..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lift Your Ride: Metalcloak Jk Sway Bar Links Are The Extended Length Links Needed For Lifted Jeeps That Are Equipped With Factory Sway Bar Disconnect. These Disconnects Extend Up To 14.5”..
Features
- SPECIFIC DESIGN/SIZE: Metalcloak JK Wrangler Sway Bar Link Extension Kit, 14.5"Bolts in place with no cutting or modification required. They are designed for the Electronic Sway Bar, Metalcloak s 5.5 lift, as well as the Metalcloak JK Lift Kits.
- LIFT YOUR RIDE: MetalCloak JK Sway Bar Links are the extended length links needed for lifted Jeeps that are equipped with factory sway bar disconnect. These disconnects extend up to 14.5 .
- MADE TO BE DURABLE: Sway bar End Links are Made of 1/2 steel and steel coated with a gold zinc shine.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #14
"ARB Twin Compressor" Mounting Kit By Metalcloak, Compatible with JK Wrangler ('07 - '18), Laser Cut, Durable Mount, Easy Install
Asin: B091MQC45Q | Ean: 0850028646205 | UPC: 850028646205
Gold Zinc Finsh: The Mount Is Finished In Metalcloak’S Signature Gold Zinc For A Long-Lasting Finish And To Protect It Against The Elements..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Laser Cut: Is Laser Cut From Strong 1/8" Hot Rolled Steel And Is Cnc Formed For A Perfect Fit..
Features
- SPECIFIC DESIGN: The MetalCloak ARB Twin Compressor Mount is engineered to provide a mounting location for the ARB Twin compressor for the JK Wrangler.
- LASER CUT: Is laser cut from strong 1/8 hot rolled steel and is CNC formed for a perfect fit.
- GOLD ZINC FINSH: The mount is finished in MetalCloak s signature gold zinc for a long-lasting finish and to protect it against the elements.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #15
Front Sway Bar Link Extension Kit By Metalcloak, 12.25", Compatible with JK/JL/JT Wrangler, Lift Your Ride, Bolt On Install, Gold Zinc Chromate, and Easy to Install
Asin: B08W9FCNWN | Ean: 0850021477929 | UPC: 850021477929
Made To Be Durable: Sway Bar End Links Are Made Of 1/2" Steel And Steel Coated With A Gold Zinc..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lift Your Ride: Metalcloak Jk/Jl Sway Bar Links Are The Extended Length Links Needed For Lifted Jk/Jl’S That Are Equipped With Factory Sway Bar Disconnect. These Disconnects Extend Up To 12.25”..
Features
- SPECIFIC DESIGN/SIZE: Metalcloak JK/JL Wrangler Sway Bar Link Extension Kit, 12.25" Bolts in place with no cutting or modification required. They are designed for the Metalcloak 3.5 lift, Metalcloak JK/JL suspension systems, and the Electronic Sway Bar.
- LIFT YOUR RIDE: MetalCloak JK/JL Sway Bar Links are the extended length links needed for lifted JK/JL s that are equipped with factory sway bar disconnect. These disconnects extend up to 12.25 .
- MADE TO BE DURABLE: Sway Bar End Links are made of 1/2 steel and steel coated with a gold zinc.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #16
Spare Tire License Plate Relocation Bracket, JL Wrangler, Easy Installation, Easy Removal, Simple and Effective, Made in The USA
Asin: B0C15LSF9B | Ean: 0850050509059 | UPC: 850050509059
Easy To Remove: Comes With A Quick Release/Adjustment Pin For Easy Removal On The Trail; Quick Release Pin Can Be Substituted With A Bolt For Security If Needed..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Features Include: License Plate Adapter, License Plate Mount, Third Brake Light, License Plate Light, Wiring, All Required Hardware, Made In The Usa.
Simple & Effective: The Relocation Bracket And 3Rd Brake Light Kit Has A Bright Led For The Rear Brake Light And An Led For Illuminating The License Plate. This Is A Simple And Effective Way To Relocate Your Plate Into The Center Of Your Wheel And Add Some Nice Features..
Features
- EASY TO INSTALL: The JL Wrangler & JT Gladiator Rear License Plate Relocation Bracket & 3rd Brake light is easy to install and provides a sturdy mount for your rear license plate with the added benefit of a 3rd brake light for safety.
- SIMPLE & EFFECTIVE: The Relocation Bracket and 3rd brake light kit has a bright LED for the rear brake light and an LED for illuminating the license plate. This is a simple and effective way to relocate your plate into the center of your wheel and add some nice features.
- EASY TO REMOVE: Comes with a quick release/adjustment pin for easy removal on the trail; quick release pin can be substituted with a bolt for security if needed.
- FEATURES INCLUDE: License Plate Adapter, License Plate Mount, Third Brake Light, License Plate Light, Wiring, All Required Hardware, Made in the USA
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
Weight: 1.00 pounds
See On Amazon #17
MetalCloak Outboard Shock Mount Spacer, Relocation Kit, Compatible with Jeep 2007-2018 JK Wrangler, Strong 3/16 Hot Rolled Steel Plate, Shock Mount Spacers, Gold Zinc Plate Protection, Easy Install
Asin: B01M1K9R42 | Ean: 0850021477134 | UPC: 850021477134
Strong 3/16” Hot Rolled Steel Plate - Manufactured From Laser Cut 3/16" Hot Rolled Steel Plate And Cnc Bent For Superior Strength And Exact Fitment..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Easy To Install - Can Be Installed In Minutes Making For A Quick And Easy Install..
Made In Usa - Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Gold Zinc Plate Protection - Treated With Gold Zinc Chromate For The Ultimate In Defense Against The Elements..
Extreme Articulation - Outboard Shock Mounts Are Engineered To Move The Lower Shock Mounts Away From The Jeep Frame Rails Increasing Clearance For The Shock Body At The Extremes Of Articulation..
Features
- OPTIMIZED PERFORMANCE - MetalCloak's Outboard Front Lower Shock Mounts provide the needed clearance and turns the shock eyelet the correct direction to optimize performance. This is a simple bolt on kit that will improve the performance of your shocks.
- EXTREME ARTICULATION - Outboard Shock Mounts are engineered to move the lower shock mounts away from the Jeep frame rails increasing clearance for the shock body at the extremes of articulation.
- STRONG 3/16 HOT ROLLED STEEL PLATE - Manufactured from laser cut 3/16 hot rolled steel plate and CNC bent for superior strength and exact fitment.
- GOLD ZINC PLATE PROTECTION - Treated with Gold Zinc Chromate for the ultimate in defense against the elements.
- EASY TO INSTALL - Can be installed in minutes making for a quick and easy install.
- MADE IN USA - Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #18
Front Sway Bar Quick Disconnect By Metalcloak, Compatible with JL Wrangler 2018+ & for JT Gladiator 2019 +, Maximum Articulation, Made in the USA
Asin: B0BLZM6FD1 | Ean: 0850028646830 | UPC: 850028646830
Fit Without Any Cutting Required: This Quick Release Disconnects Are Bolt On And Fit Without Any Cutting Required. These Front Sway Bar Quick Disconnect Are Designed To Work In Conjunction With Metalcloak's 3.5" Suspension..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Features Include: Extension Bracket For Easy Access, Sway Bar Disconnects, Bar Pin Quick Clips, Grade 8 Zinc Plated Bolts, And Zinc Plated Laser Cut Disconnect Mount Brackets..
Maximum Articulation: Disconnecting The Sway Bar While Off-Road Allows Your Ride To Achieve The Maximum Articulation That Your Suspension Has Been Designed For. Metalcloak Quick Disconnects Are Easy To Disconnect And Then Re-Connect; Unique To The Metalcloak System, Is An Extension Bracket That Allows Easier Access For Reaching The Attachment Point..
Features
- BOLT DIRECTLY INTO THE FACTORY LOCATION: The Front Sway Bar Quick Disconnect (12" length) for JL Wrangler and JT Gladiator Truck , by MetalCloak bolt directly into the factory locations and allow for manual disconnect of the front sway bar.
- MAXIMUM ARTICULATION: Disconnecting the sway bar while off-road allows your ride to achieve the maximum articulation that your suspension has been designed for. MetalCloak Quick Disconnects are easy to disconnect and then re-connect; unique to the MetalCloak system, is an extension bracket that allows easier access for reaching the attachment point.
- FIT WITHOUT ANY CUTTING REQUIRED: This quick release disconnects are bolt on and fit without any cutting required. These front sway bar quick disconnect are designed to work in conjunction with MetalCloak's 3.5 suspension.
- FEATURES INCLUDE: Extension bracket for easy access, sway bar disconnects, bar pin quick clips, grade 8 zinc plated bolts, and zinc plated laser cut disconnect mount brackets.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #19
ARB Single Compressor Mounting Bracket by Metalcloak, Compatible with JK Wrangler (2007-2018), Laser Cut, Specific Design, Single Compressor Mount; Easy Install
Asin: B01M0L8MV8 | Ean: 0850028646274 | UPC: 850028646274
Gold Zinc Finsh: The Mount Is Finished In Metalcloak’S Signature Gold Zinc For A Long Lasting Finish And To Protect It Against The Elements..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Laser Cut: The Single Compressor Mount Is Laser Cut From Strong 3/16" Hot Rolled Steel And Is Cnc Bent For A Perfect Fit..
Features
- SPECIFIC DESIGN: The MetalCloak ARB Single Compressor Mount is engineered to provide a mounting location for the ARB single compressor for the Jeep JK Wrangler.
- LASER CUT: The single compressor mount is laser cut from strong 3/16 hot rolled steel and is CNC bent for a perfect fit.
- GOLD ZINC FINSH: The mount is finished in MetalCloak s signature gold zinc for a long lasting finish and to protect it against the elements.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #20
Adjustable Bump Stops By Metalcloak, Rear, (1" - 4"), Compatible with JK/JL Wrangler and JT Gladiator, Maximize Suspension, Specific Design, and Easy to Install
Asin: B08S32YYDK | Ean: 0850021477516 | UPC: 850021477516
Easy Adjustment - Give Your Wrangler Anywhere From 1 To 4 Inches Of Adjusted Height To Give Your Tires Some Space From Your Vital Components..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Easy Install - Pads Are Made Strategically For An Easy Installation Process, No Matter How Many Pads Are Needed..
Maximize Suspension - Easily Add Or Take Away The Stackable Pads To Get The Perfect Amount Of Bump-Stop Needed To Maximize Your Suspension Travel While Setting Limit To Keep Tires From Hitting Vital Components..
Features
- SPECIFIC DESIGN - Rear Bump-Stop System is designed so you can dial in the exact amount of bump stop for the tire size you choose. Designed for the JK/JL Wrangler & JT Gladiator Truck rear applications.
- MAXIMIZE SUSPENSION - Easily add or take away the stackable pads to get the perfect amount of bump-stop needed to maximize your suspension travel while setting limit to keep tires from hitting vital components.
- EASY ADJUSTMENT - Give your Wrangler anywhere from 1 to 4 inches of adjusted height to give your tires some space from your vital components.
- EASY INSTALL - Pads are made strategically for an easy installation process, no matter how many pads are needed.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #21
Upper Front DuroSpring Replacement Bump Stops By Metalcloak, Compatible with TJ/JK/JL/JT Versatile Compatibility, Superior Performance, No Maintenance, Easy Install
Asin: B091G3HZ4G | Ean: 0850028646168 | UPC: 850028646168
Microcellular Properties Add Dampening: Metalcloak's Microcellular Urethane Bumps Add Cushioning, Control, And Additional Spring Rate With A Soft Mechanical Stopping Point For The Compression Of Your Suspension. Smooth Out Your Ride With Metalcloak Durospring Replacement Bump Stops..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
No Maintenance: Durosprings Require No Maintenance, Zero Mechanical Sliding Parts To Bind And Seize, No Fluids To Change Or Gases To Charge..
Easy To Install: Can Be Installed In Minutes Making For A Quick And Easy Install..
Increased Comfort And Control: Simply Install Metalcloak Durosprings Into The Factory Jounce Locations And Enjoy The Extra Confidence, Comfort, And Control..
Versatile Compatibility: 2007 - 2018 Jk Wrangler | 2018 + Jl Wrangler, Tj/Lj Wrangler, And Jt Gladiator..
Features
- SUPERIOR PERFORMANCE OVER FACTORY BUMP STOPS: DuroSprings offer silent and supple control, absorbing compression energy and slowly releasing it with a dampened return providing increased stability and comfort, all while reducing stresses that occur when pushing your vehicles components to the limits.
- VERSATILE COMPATIBILITY: 2007 - 2018 JK Wrangler | 2018 + JL Wrangler, TJ/LJ Wrangler, and JT Gladiator.
- MICROCELLULAR PROPERTIES ADD DAMPENING: MetalCloak's Microcellular Urethane bumps add cushioning, control, and additional spring rate with a soft mechanical stopping point for the compression of your suspension. Smooth out your ride with MetalCloak DuroSpring Replacement Bump Stops.
- INCREASED COMFORT AND CONTROL: Simply install MetalCloak DuroSprings into the factory jounce locations and enjoy the extra confidence, comfort, and control.
- NO MAINTENANCE: DuroSprings require NO maintenance, zero mechanical sliding parts to bind and seize, no fluids to change or gases to charge.
- EASY TO INSTALL: Can be installed in minutes making for a quick and easy install.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #22
RockSport RED Performance Long Travel Shock Absorbers by MetalCloak, For TJ & LJ Wrangler Front, Engineered For a Fantastic Ride On and Off-Road, Easy Installation, Made in the USA
Asin: B08DC32HB3 | Ean: 0850021477028 | UPC: 850021477028
Proven Safe: Metalcloak “Components” Have Been Proven Safe With The Fmvss Certificate Of Safety Configured With 37" Tires, Full Body Armor And Suspension Lift..
Features Include: 18 Mm Chrome Shafts, Double Welded Bushing Eyes, Natural Rubber Mount Bushings, Nitrogen Gas Charged To Resist Fading, And Protected With Shaft Length Stone Guard..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Refined Compression And Dampening: Metalcloak Has Refined The Rocksport Red Shocks Compression And Dampening To Provide Stable, Yet Compliant Manners For Daily Driving And Also In Situations Where Long Travel Articulation Is Needed To Keep The Tires Planted On The Ground..
Rocksport Red Shock Length: Extended Length Is 27.4” And The Collapsed Length Is 16.2”..
Compatible With: 1997 - 2006 Jeep Tj Wrangler And Lj Wrangler..
Provide A Fantastic Ride On And Off-Road: Rocksport Red Long Travel Shocks Have Been Engineered To Work In Unison With Metalcloak's True Dual-Rate Coils. Properly Valved And Tested By The Engineers At Metalcloak, Rocksport Red Shocks Provide A Fantastic Ride On And Off-Road With A Comfortable Yet Stable Compression And Rebound Cycle With Lots Of Travel..
Features
- CUSTOM DESIGNED: TJ Wrangler RockSport RED Long Travel Shocks are custom designed and distributed only by MetalCloak. These trail proven, Twin Tube Shocks have proprietary valving tuned specifically to MetalCloak's exacting standards.
- PROVIDE A FANTASTIC RIDE ON AND OFF-ROAD: RockSport RED Long Travel Shocks have been engineered to work in unison with MetalCloak's True Dual-Rate Coils. Properly valved and tested by the engineers at MetalCloak, RockSport RED shocks provide a fantastic ride on and off-road with a comfortable yet stable compression and rebound cycle with lots of travel.
- PROVEN SAFE: MetalCloak components have been proven safe with the FMVSS certificate of safety configured with 37 tires, full body armor and suspension lift.
- COMPATIBLE WITH: 1997 - 2006 Jeep TJ Wrangler and LJ Wrangler.
- REFINED COMPRESSION AND DAMPENING: MetalCloak has refined the RockSport RED Shocks compression and dampening to provide stable, yet compliant manners for daily driving and also in situations where Long Travel articulation is needed to keep the tires planted on the ground.
- ROCKSPORT RED SHOCK LENGTH: Extended length is 27.4 and the collapsed length is 16.2 .
- FEATURES INCLUDE: 18 mm chrome shafts, double welded bushing eyes, natural rubber mount bushings, nitrogen gas charged to resist fading, and protected with shaft length stone guard.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #23
Rocksport RED Performance Long Travel Shock Absorbers by MetalCloak, For TJ Wrangler Rear, Engineered For a Fantastic Ride On and Off-Road, Easy Installation, Made in the USA
Asin: B08DBT894V | Ean: 0850021477035 | UPC: 850021477035
Features Include: 18Mm Chrome Shafts, Double Welded Bushing Eyes, Natural Rubber Mount Bushings, Nitrogen Gas Charged To Resist Fading, And Protected With Shaft Length Stone Guard..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Rocksport Red Shock Length: The Rocksport Red Shock Length Extended Is 24.5” And Collapsed Length Is 14.6”..
Made In Usa - Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Proven Safe: Metalcloak “Components” Have Been Proven Safe With The Fmvss Certificate Of Safety Configured With 37" Tires, Full Body Armor And Suspension Lift..
Provide A Fantastic Ride: Rocksport Red Long Travel Shocks Have Been Engineered To Work In Unison With Metalcloak's True Dual-Rate Coils. Properly Valved And Tested By The Engineers At Metalcloak, Rocksport Shocks Provide A Fantastic Ride On And Off-Road With A Comfortable Yet Stable Compression And Rebound Cycle With Lots Of Travel..
Features
- CUSTOM DESIGNED: TJ Wrangler RockSport RED Long Travel Shocks are custom designed and distributed only by MetalCloak. These trails proven; Twin Tube Shocks have proprietary valving tuned specifically to MetalCloak's exacting standards.
- PROVIDE A FANTASTIC RIDE: RockSport RED Long Travel Shocks have been engineered to work in unison with MetalCloak's True Dual-Rate Coils. Properly valved and tested by the engineers at MetalCloak, RockSport shocks provide a fantastic ride on and off-road with a comfortable yet stable compression and rebound cycle with lots of travel.
- FEATURES INCLUDE: 18mm chrome shafts, double welded bushing eyes, natural rubber mount bushings, nitrogen gas charged to resist fading, and protected with shaft length stone guard.
- PROVEN SAFE: MetalCloak components have been proven safe with the FMVSS certificate of safety configured with 37 tires, full body armor and suspension lift.
- ROCKSPORT RED SHOCK LENGTH: The RockSport RED Shock Length extended is 24.5 and collapsed length is 14.6 .
- MADE IN USA - Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #24
Upper Rear DuroSpring Replacement Bump Stops By Metalcloak, For 2019+ JT Gladiator/ '09-'19 Ram 1500, Microcellular Urethane Bump Stops, Increased Comfort and Control, Easy to Install, Made in the USA
Asin: B0955FP54T | Ean: 0850028646304 | UPC: 850028646304
Microcellular Compression - Durosprings Offer Silent And Supple Control, Absorbing Compression Energy And Slowly Releasing It With A Dampened Return Providing Increased Stability And Comfort..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Easy To Install - Simple To Install And Require No Maintenance. Zero Mechanical Sliding Parts To Bind And Seize. No Fluid To Change Or Gases To Charge..
Made In Usa - Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Increased Comfort And Control - Simply Install Metalcloak Durosprings Into The Factory Jounce Locations And Enjoy The Extra Confidence, Comfort, And Control..
Superior Performance Over Factory Bump Stops - Metalcloak's Microcellular Urethane Bumps Add Cushioning, Control, And Additional Spring Rate With A Soft Mechanical Stopping Point For The Compression Of Your Suspension. Smooth Out Your Ride With Metalcloak Durospring Replacement Bump Stops..
Features
- MINIMIZE HARSH BOTTOMING OUT - Minimize the harsh bottoming out of your JT Gladiator or Ram 1500 rear suspension with a set of MetalCloak's DuroSpring Upper Rear Bump Stop Replacements.
- SUPERIOR PERFORMANCE OVER FACTORY BUMP STOPS - MetalCloak's Microcellular Urethane bumps add cushioning, control, and additional spring rate with a soft mechanical stopping point for the compression of your suspension. Smooth out your ride with MetalCloak DuroSpring Replacement Bump Stops.
- MICROCELLULAR COMPRESSION - DuroSprings offer silent and supple control, absorbing compression energy and slowly releasing it with a dampened return providing increased stability and comfort.
- INCREASED COMFORT AND CONTROL - Simply install MetalCloak DuroSprings into the factory jounce locations and enjoy the extra confidence, comfort, and control.
- EASY TO INSTALL - Simple to install and require no maintenance. Zero mechanical sliding parts to bind and seize. No fluid to change or gases to charge.
- MADE IN USA - Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #25
Rear Differential Skid Plate by Metalcloak, Compatible with JT Gladiator M220 [3rd Gen Dana 44], Pure Protection, Made Durable, Easy Install, Made in The USA
Asin: B08S5H38SK | Ean: 0850021477318 | UPC: 850021477318
Made To Be Durable: Metalcloak's Skid Plate Is Made From Laser Cut, 3/16" Steel, For A Perfect Fit With Rock Bashing Strength! The Differential Skid Plate Easily Bolts In Place And Will Keep Your Jt Sliding Over The Terrain, Ensuring That Your Differential Is Saved From Damage..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Provides Clearance: Polymer Sway Bar Drop Spacers Provide The Needed Clearance For Unhindered Performance. Skid Is Finished In Gold Zinc For A Finish That Looks Great And Holds Up To Abuse..
Prepare For Impact: The Metalcloak Differential Skid Plate (Dsp) Encases The Vulnerable Hang Up Locations With 7 Gauge Steel, Providing A Smooth And Protective Surface To Glide Over The Rocks. Protection With A Simple Bolt-On Solution..
Features
- PURE PROTECTION: The first ridge is to strengthen the differential, the second is the mounting location for the differential cover; you DO NOT want to damage these locations.
- PREPARE FOR IMPACT: The MetalCloak Differential Skid Plate (DSP) encases the vulnerable hang up locations with 7 gauge steel, providing a smooth and protective surface to glide over the rocks. Protection with a simple bolt-on solution.
- MADE TO BE DURABLE: MetalCloak's skid plate is made from laser cut, 3/16 steel, for a perfect fit with rock bashing strength! The Differential Skid Plate easily bolts in place and will keep your JT sliding over the terrain, ensuring that your differential is saved from damage.
- PROVIDES CLEARANCE: Polymer sway bar drop spacers provide the needed clearance for unhindered performance. Skid is finished in Gold Zinc for a finish that looks great and holds up to abuse.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #26
Durotrak Track Bar By Metalcloak, Solid Chromoly, Front, Compatible with JK Wrangler, Adjustable, Patented Durotrak Bushings, Proven Safe, Uniquely Engineered, Easy Install
Asin: B01LX0DNJ9 | Ean: 0850021477905 | UPC: 850021477905
Made To Be Durable: The Durotrak Adjustable Front Track Bar For The Jeep Jk Wrangler Is Built With Patented Durotrak 2-Piece Bushings That Are Mounted On Both Sides Of The Solid 1.25 Od 4130 Chromoly Bar..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Proven Safe: Metalcloak “Components” Have Been Proven Safe With The Fmvss Certificate Of Safety Configured With 37" Tires, Full Body Armor And Suspension Lift..
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Patented Durotrak Bushings: The Durotrak 2-Piece Bushing Provides The Best Nvh..
Adjustable: The Solid Chromoly Track Bar Is Uniquely Designed To Clear On Up-Travel As Well As Down-Travel And Fit Aftermarket Housings (Dana 60). No Other Track Bar Is Designed With This Much Clearance And Up-Travel In Mind..
Features
- UNIQUELY ENGINEERED: JK Wrangler Front Durotrak Heavy Duty Adjustable Track Bar is designed strong to meet the demands of on and off-road driving for your lifted JK.
- ADJUSTABLE: The Solid Chromoly track bar is uniquely designed to clear on up-travel as well as down-travel AND fit aftermarket housings (Dana 60). No other track bar is designed with this much clearance and up-travel in mind.
- MADE TO BE DURABLE: The Durotrak adjustable front track bar for the Jeep JK Wrangler is built with Patented Durotrak 2-piece bushings that are mounted on both sides of the Solid 1.25 OD 4130 Chromoly bar.
- PATENTED DUROTRAK BUSHINGS: The Durotrak 2-piece bushing provides the best NVH.
- PROVEN SAFE: MetalCloak components have been proven safe with the FMVSS certificate of safety configured with 37 tires, full body armor and suspension lift.
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #27
JK Wrangler sPod Bantam X or SourceLT Mount & Vacuum Pump Relocation Kit, Provides Wiring System Mount, Perfect Fitment, Gold Zinc Finish, Made in USA
Asin: B0C4438YSF | Ean: 0850050509233 | UPC: 850050509233
Perfect Fitment: Metalcloaks Sourcelt/Bantam-X Spod Mount Combines A Vacuum Pump Relocation Bracket With A Mounting Point For This Popular Electrical Management Accessory. Once In Place This Relocation Bracket Is The Perfect Perch For The Sourcelt Or Bantam-X Spod Management System..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Features Include: 1/8” Steel Mounting/ Relocation Plate, Cad Formed & Laser Cut, Relocates Vacuum Pump, Perfect Fitment, Fits Spod Bantam-X Or Sourcelt, Additional 18Ga Wire, Aluminum Spacers, Electrical Connectors & Needed Hardware, Signature “M” Design, Gold Zinc Finish, Easy Installation, Made In Usa.
Made In Usa: Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Gold Zinc Finish: The 1/8" Laser Cut And Cad Formed Steel Bracket Comes With Everything You Need To Relocate The Vacuum Pump And Is Finished In A Durable Gold Zinc..
Necessary For Bumper System Compatibility: Relocating The Vacuum Pump Is Necessary To Fit A Metalcloak Jk Frame-Built Bumper System Or A Bumper That Mounts The Winch Low..
Features
- PROVIDES WIRING SYSTEM MOUNT: MetalCloak's SourceLT / Bantam-X "sPod" Mount & Vacuum Pump Relocation Kit for the 2012 and later model Jeep JK Wranglers, moves the vacuum pump (located by your front frame rail) up into the engine compartment and provides a mount for the Bantam-X or SourceLT sPod Wiring System.
- NECESSARY FOR BUMPER SYSTEM COMPATIBILITY: Relocating the vacuum pump is necessary to fit a MetalCloak JK Frame-Built Bumper System or a bumper that mounts the winch low.
- PERFECT FITMENT: MetalCloaks SourceLT/Bantam-X sPod mount combines a vacuum pump relocation bracket with a mounting point for this popular electrical management accessory. Once in place this relocation bracket is the perfect perch for the SourceLT or Bantam-X sPod management system.
- GOLD ZINC FINISH: The 1/8 laser cut and CAD formed steel bracket comes with everything you need to relocate the vacuum pump and is finished in a durable gold zinc.
- FEATURES INCLUDE: 1/8 Steel Mounting/ Relocation Plate, CAD Formed & Laser Cut, Relocates Vacuum Pump, Perfect Fitment, Fits sPod Bantam-X or SourceLT, Additional 18GA Wire, Aluminum Spacers, Electrical Connectors & Needed Hardware, Signature M Design, Gold Zinc Finish, Easy Installation, Made in USA
- MADE IN USA: Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
See On Amazon #28
Metalcloak Steering Stabilizer Billet Mount, Fits Updated 1.625" (1 5/8") Tie Rod, Compatible with JK/JL/JT, Fastens Securely, Maximum Performance, Easy Install
Asin: B08KWRPC76 | Ean: 0850021477141 | UPC: 850021477141
Versatile Build: The Metalcloak Billet Steering Stabilizer Mount Was Designed For The Metalcloak Chromoly Tie Rod But Will Fit Any 1.625" Od Tie Rods And For The Jeep Wrangler Jk, Jl And Jeep Gladiator Jt Truck..
Lifetime Customer Service: Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Designed With Style: Finished In Anodized Black With A Laser Engraved "M" Around The Recessed Bolt Holes For A Clean And Custom Look..
Provides Maximum Performance: The Two Piece Aluminum Billet Design Is Simple To Install And Allows You To Position The Stabilizer For Maximum Performance..
Features
- FASTENS SECURELY: The aluminum billet clamp fastens securely to 1.625" OD diameter tie rod.
- PROVIDES MAXIMUM PERFORMANCE: The two piece aluminum billet design is simple to install and allows you to position the stabilizer for maximum performance.
- VERSATILE BUILD: The MetalCloak billet steering stabilizer mount was designed for the MetalCloak Chromoly Tie Rod but will fit any 1.625 OD tie rods and for the Jeep Wrangler JK, JL and Jeep Gladiator JT Truck.
- DESIGNED WITH STYLE: Finished in anodized black with a laser engraved M around the recessed bolt holes for a clean and custom look.
- LIFETIME CUSTOMER SERVICE: Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #29
Rear Diff Cover [M220|3rd Gen D44] Rubicon Edition by Metalcloak, Compatible with JL Wrangler and JT Gladiator, Made with Ductile Cast Iron for Pure Protection, Comes Without Coating, Easy Install
Asin: B091MF37X4 | Ean: 0850028646212 | UPC: 850028646212
Designed With A Recessed Fluid Fill Hole: It Features A Flush Mount Fill Hole And Shows Style With A Metalcloak "M" Embossed On The Outside..
Easy Installation: Can Be Installed For A Quick And Easy Install..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Customized Finish: Comes Without Coating And Ready For Your Custom Finish..
Ductile Cast Iron Diffiential Cover: Not Just A Pretty Piece Of Armor, The Differential Cover Is Made Of Ductile Cast Iron And Is Tested To Over 20 Tons Of Rock Bashing Strength..
Features
- PURE PROTECTION: The MetalCloak JL Rear Dana M220 [3RD Gen D44] Differential Cover Plate is pure protection. Your differential is one of the most vulnerable areas on your Jeep and now it can be "Cloaked" with our signature MetalCloak Differential Cover.
- DUCTILE CAST IRON DIFFIENTIAL COVER: Not just a pretty piece of armor, the differential cover is made of Ductile Cast Iron and is tested to over 20 tons of rock bashing strength.
- DESIGNED WITH A RECESSED FLUID FILL HOLE: It features a flush mount fill hole and shows style with a MetalCloak M embossed on the outside.
- CUSTOMIZED FINISH: Comes without coating and ready for your custom finish.
- EASY INSTALLATION: Can be installed for a quick and easy install.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: Metalcloak
See On Amazon #30
Spare Tire 3rd Brake Light Mount by Metalcloak, Fits Jeep 2018+ JL Wrangler, Compatible with Factory and Aftermarket Tire Mounts, Made of 1/8 Hot Rolled Steel, Black Powder Coat Finish
Asin: B09TQ4HZYS | Ean: 0850028646359 | UPC: 850028646359
Hot Rolled Steel: Made Of 1/8” Hot Rolled Steel With A Micro-Texture Semi-Gloss Finish That Is Easily Repairable After Trail Damage..
Lifetime Customer Service - Metalcloak Provides Lifetime Customer Service And Support. If You Have Any Problem Whatsoever With Your Product, Simply Contact Us And We Will Find A Way To Make It Right..
Easy Install: Can Be Bolted On In Minutes Making For A Quick And Easy Install..
Made In Usa - Not An Imported Product, 100% In House Engineered, Designed, Tested And Cnc Manufactured Right In Our Northern California 70,000 Sq Ft Plant And Warehouse..
Black Powder Coat Finish: The Light Mount Is Finished In Metalcloak’S Signature Black Powder Coat To Protect It Against The Elements When Out On The Trail Making This Simple Bolt On Brake Light Mount A "Must Have" Addition To Your Spare Tire Carrier..
Compatibility: Is Compatible With Factory Tire Carrier, Metalcloak Sportgate, Or Any Other Tail Gate Spare Tire Mount. Fits Jeep Jl Wrangler 2018+..
Features
- CLEAN LOOK: Retain a clean look when using a larger size spare tire, by using the MetalCloak 3rd Brake Light Mount; the mount uses the factory light already on your Jeep and mounts it to the 1/8" hot rolled steel assembly.
- COMPATIBILITY: Is compatible with factory tire carrier, MetalCloak SportGate, or any other tail gate spare tire mount. Fits Jeep JL Wrangler 2018+.
- HOT ROLLED STEEL: Made of 1/8 hot rolled steel with a micro-texture semi-gloss finish that is easily repairable after trail damage.
- BLACK POWDER COAT FINISH: The light mount is finished in MetalCloak s signature black powder coat to protect it against the elements when out on the trail making this simple bolt on brake light mount a must have addition to your spare tire carrier.
- EASY INSTALL: Can be bolted on in minutes making for a quick and easy install.
- MADE IN USA - Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse.
- LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right.
- See more on Amazon...
Brand: Metalcloak | Manufacturer: MetalCloak
Weight: 5.00 pounds
See On Amazon