Micro-Mesh - Buying Guide
Last Updated: 04/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Micro-Mesh Pen Sanding Kit
Asin: B0037MEIT2 | Ean: 0725123001139 | UPC: 725123001139
The Results Are Truly Wonderful And Will Most Definitely Please The Most Discriminate Of Eyes. The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Works Great On Stabilized Woods, Acrylics & Solid Surface Materials. Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process. 9 Micro-Mesh Pads Included..
Ideal For Use With Plastics, Resin Or Impregnated Blanks When Turning. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! When Using The Pads It Is Recommended That Start At The Lower Grit Of 1500 And Step Or Cycle Your Way Up To The High Grit Of 12000..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Starting with the lowest grit of 1500 all the way up to 12000 grit this abrasive pad pack is sure the leave your project just the way you want it.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! When using the pads it is recommended that start at the lower grit of 1500 and step or cycle your way up to the high grit of 12000.
- The results are truly wonderful and will most definitely please the most discriminate of eyes. The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with plastics, resin or impregnated blanks when turning. The pads can also be used around the home for fine repair work.
- Works great on stabilized woods, acrylics & solid surface materials. Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process. 9 Micro-Mesh Pads included.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod
Dimensions: 1.25 x 4.40 x 3.40 Inches | Weight: 0.02 pounds
See On Amazon #2
Micro-Mesh 3 x 4 Soft Touch Pads
Asin: B003ELH7AI | Model: 3MSTP6VW | PartNumber: 3MSTP6VW | Ean: 0725123001146, 0696738137257, 5915903681476, 0082045098891, 5915903681469 | UPC: 725123001146, 082045098891, 696738137257
The Pack Includes 9 Each 3 Inch By 4 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 0.10 x 7.10 x 5.95 inches | Weight: 0.20 pounds
See On Amazon #3
Micro-Mesh Micro - 4N0000V Colored Sanding Sticks
Asin: B003ELIO0A | Model: MICRO - 4N0000V | PartNumber: MICRO - 4N0000V | Ean: 0725123001191, 0696738486508 | UPC: 696738486508, 725123001191
Re-Usable And Last A Very Long Time.
Used For Metal And Wood Finishing.
Use A Utility Knife To Tailor Shape Them.
Features
- Use to smooth jagged edges, protrusions and raised particles from contoured areas
- Use a utility knife to tailor shape them
- Re-usable and last a very long time
- Used for metal and wood finishing
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: MICRO-SURFACE FINISHING PROD.
Dimensions: 0.50 x 4.05 x 1.70 inches | Weight: 0.02 pounds
See On Amazon #4
3 x 4 Micro-Mesh TM Sanding Pads 9 Grits
Asin: B0756MT6X8 | Model: 3 x 4 Soft Pads | PartNumber: 3 x 4 Soft Pads
The Pack Includes 9 Each 3 Inch By 4 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 0.10 x 3.00 x 4.00 inches | Weight: 4.00 ounces
See On Amazon #5
Micro-Mesh 19 Piece Woodworkers Pack with 18 Abrasive 3 Inch by 6 Inch Sheets and a Foam Sanding Block
Asin: B000H6JDCS | Model: 3KWOOD | PartNumber: 3KWOOD | Ean: 0810948010470 | UPC: 810948010470
Micro-Mesh Performs Very Well In Conjunction With Polyurethane,Polyester,Epoxy,Lacquer And So On. Follow The Manufacturer’S Recommended Cure Times Prior To Re-Coating Or Applying The Finish Coat. When You Are Applying Multiple Coats, Sand From 1500 Micro-Mesh To 3200 Or 3600 Between Coats To Remove Any Orange-Peel Or Dirt. After The Final Coat Has Fully Cured, Polish The Surface Beginning With 2400 Micro-Mesh And Continue Through The Series (3200-12000) Until The Desired Gloss Is Achieved..
This Made In The Usa Kit Contains 2 Each Of The Following; 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 And 12000. Micro-Mesh Can Be Used Wet Or Dry. When Using Micro-Mesh Dry, It Can Be "Unloaded" By Rapping Against The Palm Of Your Hand. Micro-Mesh Can Also Be Cleaned By Using A Stiff, Short Bristled Brush. It May Not Be Necessary To Go Through Every Grade Of Micro- Mesh To Reach The Desired Finish..
Satin Finishes Are Achieved By Sanding Up To The 3600 Grade. The Satin Finish Gets Progressively Higher In Gloss Through The 6000 Step. High Gloss Finishes Will Appear By The 6000 Through 12000 Step. The Wood, The Finish Used And Personal Preference Determine Where To Stop. Micro-Gloss Liquid Abrasive Can Be Hand Rubbed Onto The Finish Following The 12000 Micro-Mesh Step For An “Ultra” High Gloss Finish..
Before Starting The Micro-Mesh Cycle Of Abrasive Sanding, Coarse Sanding Should Be Done Using Up To 320 Grit Sandpaper. Shaping, Sawing Or Turning Of The Work Piece Should Be Complete.Begin With 1500 Micro-Mesh. Sand Until All Of The Sandpaper Scratches Are Removed. Continue With The Micro-Mesh Series And Cycle Up To The Desired Look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned Lemon Oil Or Danish Oil Can Be Applied As A Finish On Bare Wood..
Features
- Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop while using the
- Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.
- Micro-Mesh performs very well in conjunction with polyurethane,polyester,epoxy,lacquer and so on. Follow the manufacturer s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro-Mesh and continue through the series (3200-12000) until the desired gloss is achieved.
- Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro-Mesh step for an ultra high gloss finish.
- This MADE IN THE USA Kit contains 2 each of the following; 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000. Micro-Mesh can be used wet or dry. When using Micro-Mesh dry, it can be unloaded by rapping against the palm of your hand. Micro-Mesh can also be cleaned by using a stiff, short bristled brush. It may not be necessary to go through every grade of Micro- Mesh to reach the desired finish.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Mesh
Dimensions: 0.01 x 6.00 x 3.00 inches | Weight: 0.25 pounds
See On Amazon #6
Micro-Mesh NC-78-1 Acrylic Restoral Kit
Asin: B00EKLU5QY | Model: PA233 | PartNumber: PA233
Commonly Used For Removing Scratches From Acrylic Dome Ports..
Easy To Use..
Kit Comes With 9 Micro-Mesh Sheets, With Grits Ranging From 1500 To 12000..
Restores Up To 30 Square Feet Of Plastic Surface..
Features
- Restores up to 30 square feet of plastic surface.
- Restores up to 30 square feet of plastic surface.
- Commonly used for removing scratches from acrylic dome ports.
- Kit comes with 9 Micro-Mesh sheets, with grits ranging from 1500 to 12000.
- Easy to use.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 3.00 x 6.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #7
Micro-Mesh Finishing ROLL 6'' x 1 ft. 12000 grit Extra Fine Cloth Sandpaper
Asin: B07R17XJFL | Ean: 7426880691177
Brand: Micro - Mesh | Manufacturer: Micro-Mesh
See On Amazon #8
Micro Mesh 3'' X 6'' 12,000
Asin: B001F7LVNC
Brand: Micro-Mesh | Manufacturer: Micro Mesh
See On Amazon #9
Micro-Mesh 5" No-Hole Sanding Disc Combo Pack - 18 Pieces
Asin: B00HJCBC5O | Model: P312 | PartNumber: P312 | Ean: 0810948013129 | UPC: 810948013129
1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 Grit..
Use Dry (No Need To Wet Sand).
Use With Random Orbital Sander To Polish Large Surfaces In Half The Time.
Kit Contains 9 Grades, 2 Each Of The Following;.
Features
- 5" No- hole, hook and loop style.
- Kit contains 9 grades, 2 each of the following;
- 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 grit.
- Use with random orbital sander to polish large surfaces in half the time
- Use dry (no need to wet sand)
- See more on Amazon...
Brand: micro-mesh | Manufacturer: Micro-Mesh
Dimensions: 0.10 x 5.00 x 5.00 inches | Weight: 1.00 pounds
See On Amazon #10
Micro-Mesh 3" x 6" Soft Foam Abrasive Sanding Sheets - Precision Sanding with Cushioned Comfort
Asin: B0CQKK1LC9 | Ean: 0616576988583 | UPC: 616576988583
Provides An Outstanding Finish On Wood, Plastics, Composites, Painted Surfaces, Laquer And Soft Metals.
11 Grades Included: 1000, 1500, 1800, 2400, 3200, 3600, 4000, 6000, 7000, 8000, And 12000.
The Foam Backing Provides A Consistent Surface On Contoured, Concave, Convex And Uneven Surfaces So You Can Reach Those Difficult Areas That Need Polishing And Restoration.
Features
- The same Micro-Mesh cushioned abrasive sheets you are accustomed to but laminated to 1/32 soft foam to give you even more flexibility
- The foam backing provides a consistent surface on contoured, concave, convex and uneven surfaces so you can reach those difficult areas that need polishing and restoration
- Provides an outstanding finish on wood, plastics, composites, painted surfaces, laquer and soft metals
- 11 grades included: 1000, 1500, 1800, 2400, 3200, 3600, 4000, 6000, 7000, 8000, and 12000
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
See On Amazon #11
Micro-Mesh 1" Disk Assortment Pack
Asin: B003ELIO0K | Ean: 0725123001153 | UPC: 725123001153
Incredibly Fine Abrasive.
Very Effective For Removing Old Varnish And Paint Without Damage.
Micro-Mesh Was Originally Developed For The Restoration Of Fine Art.
Ultimate Finishing Disk.
Features
- Assortment includes 9 grits 1500-12000
- Ultimate finishing disk
- Incredibly fine abrasive
- Micro-Mesh was originally developed for the restoration of fine art
- Very effective for removing old varnish and paint without damage
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 0.70 x 3.95 x 6.80 inches | Weight: 0.04 pounds
See On Amazon #12
Micro-Mesh 3" Disk Assortment Pack
Asin: B016NWVDYU | Ean: 0725123001177 | UPC: 725123001177
Incredibly Fine Abrasive.
Very Effective For Removing Old Varnish And Paint Without Damage.
Micro-Mesh Was Originally Developed For The Restoration Of Fine Art.
Ultimate Finishing Disk.
Features
- Assortment includes 9 grits 1500-12000
- Ultimate finishing disk
- Incredibly fine abrasive
- Micro-Mesh was originally developed for the restoration of fine art
- Very effective for removing old varnish and paint without damage
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 1.30 x 6.95 x 4.00 Inches | Weight: 0.12 pounds
See On Amazon #13
Micro-Mesh Finishing Set
Asin: B071J8N2M2 | Model: 3706 | PartNumber: 3706
Use Micro-Mesh With Soapy Water To Produce A Scratch-Free Mirror Shine On Finishes And Pickguards.
Set Includes: 18 Micro-Mesh Abrasive Sheets In 9 Different Grits, Foam Sanding Block, And Instructions.
Great For Repairing Scratches And Overspray; Also Ideal For Polishing Frets.
These Gentle "Cushioned" Particles Generate Less Heat And Friction Than Ordinary Finishing Papers, Don't Load Up As Quickly, And Last Up To 15 Times Longer.
Features
- Micro-Mesh features tiny abrasive crystals on resilient cloth-backed latex
- These gentle cushioned particles generate less heat and friction than ordinary finishing papers, don't load up as quickly, and last up to 15 times longer
- Use Micro-Mesh with soapy water to produce a scratch-free mirror shine on finishes and pickguards
- Great for repairing scratches and overspray; also ideal for polishing frets
- Set includes: 18 Micro-Mesh abrasive sheets in 9 different grits, foam sanding block, and instructions
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Mesh
See On Amazon #14
Micro-Mesh 2" Disk Assortment Pack
Asin: B016NWV31S | Ean: 0725123001160 | UPC: 725123001160
Incredibly Fine Abrasive.
Very Effective For Removing Old Varnish And Paint Without Damage.
Micro-Mesh Was Originally Developed For The Restoration Of Fine Art.
Ultimate Finishing Disk.
Features
- Assortment includes 9 grits 1500-12000
- Ultimate finishing disk
- Incredibly fine abrasive
- Micro-Mesh was originally developed for the restoration of fine art
- Very effective for removing old varnish and paint without damage
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 1.00 x 4.00 x 6.75 inches | Weight: 0.07 pounds
See On Amazon #15
Micro-Mesh 5" Disk Assortment Pack
Asin: B003CLTREE | Ean: 0725123001184 | UPC: 725123001184
Includes 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000 And 12,000 Grit Pads.
Use Dry (No Need To Wet Sand).
Use With Random Orbital Sander To Polish Large Surfaces In Half The Time..
Kit Contains 9 Grades, 1 Each Of The Following;.
Features
- 5" 5 - Hole, hook and loop style
- Kit contains 9 grades, 1 each of the following;
- Includes 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000 and 12,000 grit pads
- Use with random orbital sander to polish large surfaces in half the time.
- Use dry (no need to wet sand)
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 1.80 x 6.00 x 7.30 inches | Weight: 0.26 pounds
See On Amazon #16
Small Micro-Mesh Sanding Kit
Asin: B0032YT9IK | Ean: 0725123001122 | UPC: 725123001122
Paper Is Sized For Sanding Right On The Lathe.
Abrasive Crystals Last Up To 15 Times Longer Than Normal Abrasives.
Special Foam Sanding Block.
Ideal For Pen Makers.
Features
- Ultra fine grit sandpaper
- Ideal for Pen Makers
- Paper is sized for sanding right on the lathe
- Special foam sanding block
- Abrasive crystals last up to 15 times longer than normal abrasives
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 1.50 x 4.00 x 6.65 inches | Weight: 0.14 pounds
See On Amazon #17
Large Micro-Mesh Sanding Kit
Asin: B0032YYT8U | Ean: 0725123001115 | UPC: 725123001115
Paper Is Sized For Sanding Right On The Lathe.
Abrasive Crystals Last Up To 15 Times Longer Than Normal Abrasives.
Special Foam Sanding Block.
Ideal For Pen Makers.
Features
- Ultra fine grit sandpaper
- Ideal for Pen Makers
- Paper is sized for sanding right on the lathe
- Special foam sanding block
- Abrasive crystals last up to 15 times longer than normal abrasives
- See more on Amazon...
Brand: Micro Mesh | Manufacturer: Micro-Surface Finishing Prod.
Dimensions: 2.30 x 7.70 x 4.30 Inches | Weight: 0.43 pounds
See On Amazon